FAST TRACK USB

USER GUIDE English

English

Introduction
Thank you for choosing the M-Audio Fast Track USB. Fast Track USB is your compact, professional audio solution for any Windows or Macintosh computer.* It uses the convenience of USB connectivity, so theres no need to disassemble your computer and no bulky external power supplies. Fast Track USB gives you all you need for a complete, professional-quality recording setup on the go.With an XLR microphone input and a TRS line/instrument input, stereo RCA outputs and headphone outputs, the Fast Track USB gives you full 24-bit digital audio, supporting popular 44.1kHz and 48kHz sampling rates. With its lightweight form factor and compact design, you can carry it with you anywhere. Please take the time to read this brief Users Guide. It will explain how to install the Fast Track USB on your computer, and tell you how to get the best performance out of your Fast Track USB audio interface. * must meet minimum system requirements

Whats in the Box?

The following items are included with your Fast Track USB: < < < < < Fast Track USB audio interface M-Audio Driver CD (includes driver installation software) One (1) standard USB cable Users Guide and warranty card Session music creation software for Windows

Fast Track USB Features

< < < < < < < < < < < < Single USB 1.1 connection for input and output ASIO 2, WDM and Core Audio drivers included Balanced XLR mic-level input Convenient front panel headphone output Balanced 1/4 TRS line/instrument input Signal and Peak LED input meters Line/instrument level switch for TRS input Sleek, slim plastic case with blue power LED Two line-level RCA outputs Completely USB powered (no power supply needed) High-quality mic preamp providing 50dB of gain One year warranty

M-Audio Fast Track USB

User Guide

System Requirements

Windows
Minimum: < < < < < Pentium II 350 MHz 64 MB RAM Windows XP CD-ROM drive Available USB 1.1 port Recommended: < < < < Pentium III 500 MHz or faster 128 MB RAM or more Available USB 1.1 port Windows XP

Macintosh

Minimum: < G3, G4, iMac, iBook or PowerBook with native USB support < 64 MB RAM < CD-ROM drive < Mac OS X version 10.2.8 Jaguar or later, or Mac OS X version 10.3.4 Panther or later Recommended: < G3, G4, iMac, iBook or Powerbook with native USB support (USB hubs are not supported) < 128 MB RAM < Mac OS X Jaguar version 10.2.8 or later
M-Audio suggests you also check the minimum system requirements for your software, as they may be greater than the above.

Front Panel Controls

1 2. 3. 4. 5.
.Input Level Adjusts the gain level for the rear-panel XLR input (14). Peak LED Indicates presence of peak input level from XLR input. Lights when input signal approaches 3dB before overload. Signal LED Indicates presence of input signal from XLR input. Lights when input signal level approaches 40dB. Input/Playback Mix Control Controls the ratio of input signal to playback signal from your DAW. (When you record, you should mute the track youre recording. Otherwise, youll hear the analog input signal AND latency delayed recorded signal.) Mono Switch When pressed, this switch sums the input signals to mono for direct monitoring.

6. 7. 8.

Headphone Output Standard 1/8 stereo headphone output. Output Level Adjusts overall output volume level.This control affects both the rear panel RCA outputs (11) and the headphone output (6). Power LED Lights when the unit is powered on.

Rear Panel Controls

9. 10. 11. 12. 13. 14.
Kensington Lock Connector Connect a standard laptop-style cable locking device here to protect your Fast Track USB from theft or accidental breakage. USB Connector Connect the included USB cable here, and connect the other end to your computers USB port. Line Outputs Left and Right stereo outputs. Connect these outputs to powered monitors such as the M-Audio DX4s, or to the inputs of your stereo amplier or receiver. Input Level Switch Input level selector for the 1/4 TRS input (13). When connecting a balanced line level input here, the switch should be set to LINE position. When connecting an instrument, the switch should be set to the GUITAR position. Guitar Input TRS 1/4 input for line/instrument level input. The input level is determined by the Line/Instrument Switch (12). Mic Input Balanced XLR input for connecting a dynamic microphone.

Software Installation

Your Fast Track USB is class compliant in Mac OS X (10.3.4 or later), offering true plug-and-play operation. Just plug it in, and youre ready to start recording. Your Fast Track USB also comes with M-Audios exclusive low-latency driver software for Windows XP that allows for faster communication with your computer operating system. Your Fast Track USB comes with a standard USB cable. The squared end of the cable connects to the Fast Track USB; the at end connects to your computers USB port.

If you use Windows XP, install the software rst following the directions below. Do NOT connect the Fast Track USB to your computer until instructed to do so.

Windows XP

1. 2. 3. 4. 5. 6. 7. 8. Place the Fast Track USB CD into your CD-ROM drive. Do NOT connect the Fast Track USB to your computers USB port at this time. A menu will automatically appear. If Autoplay is disabled, browse the CD content and double click the Fast Track USB folder. Then double click the Fast Track USB Installer Icon. The M-Audio Fast Track USB Installer screen will appear, asking you to conrm that you wish to install Fast Track USB. Click Next to continue. The installer will begin to copy the Fast Track USB les to your computers hard drive. In Windows XP, The Software Installation window may appear one or more times, warning you that the driver software has not passed the Windows Logo testing. Click the Continue Anyway button. Upon rebooting, the M-Audio Fast Track USB Control Panel icon will appear in the system tray. Connect the Fast Track USB to your computers USB port. Windows will display the Found New Hardware dialog and will open the New Hardware Wizard. Choose the default selection, Install the software automatically, and click Next. The New Hardware Wizard will write the remaining les to your system. You may once again see the warning that the driver software has not passed the Windows Logo testing; click Continue Anyway and allow the installation to complete. Click Finish. After the installation is complete, you may double-click on the M-Audio Fast Track USB Control Panel icon to open the Fast Track USB Control Panel. See the section Fast Track USB Control Panel for more information on the Control Panels features and functions.

Mac OS X

1. 2. Plug the Fast Track USB in to your computers USB port. Go to System Preferences in the Apple Menu. Select the Sound preference panel, and click the Output tab. Select M-Audio Fast Track USB to choose the Fast Track USB as your default output device.
Fast Track USBs Control Panel
In Windows, you can open the Fast Track USBs control panel by double clicking on the M-Audio icon in the system tray. If you have more than one M-Audio USB audio interface installer, right click the M-Audio icon in the system tray, and select Open M-Audio Fast Track USB control panel.

About Tab

This tab will show you the Fast Track USBs current control panel, driver and rmware versions, and allow you to connect to the M-Audio website for updates.The Fast Track USBs control panel also provides helpful links to the M-Audio web sites knowledge base, manuals, support, and registration pages.

Latency Tab

The Latency Page allows you to adjust the Fast Track USBs buffer size in order to achieve the optimal balance between system stability and audio latency.
Latency is a measure of the delay between the time you make a sound and the time the computer records (or monitors) that sound. Here, the unit for latency is the number of samples the driver collects before sending them to an application as input. Lower latency can make recording easier and more accurate but not all computer systems can operate at the lowest latencies without introducing noise. If you experience unwanted input noise, increase latency. To increase latency, move the control panels latency slider up, and to decrease latency, move it down. The default Latency setting is 256. This setting should serve your purposes, but you can experiment with lower settings if you wish. If you experience stuttering or crackling in your audio playback, try using a higher latency setting. Fast Track USB and Windows Media Drivers

WDM/MME

Fast Track USBs Windows drivers support Windows native WDM/MME protocol, allowing you to use Fast Track USB as your Windows default audio device. If Fast Track USB is the only audio device installed on your computer, Windows will select it automatically. If you have other audio devices installed, you may need to select it as your default device: 1. 2. 3. Click the Start menu, then choose Settings/Control Panel. Open the audio properties panel. In Windows XP it is labeled Sounds and Audio Devices. Under Playback and Record, select Fast Track USB from the drop down list. Click Apply, then click Okay to close the Control Panel.
Fast Track USB also supports Steinbergs ASIO protocol under Windows XP, used in applications such as Session, Cubase, Reason, Live, Logic and other programs. Fast Track USBs ASIO drivers are installed from the M-Audio Fast Track USB driver CD-ROM. If you have other audio devices installed in your computer, you may need to select Fast Track USB as the ASIO device in your audio software. Refer to the instructions in your audio software for details. If you are using Session with Fast Track USB, and Fast Track USB is the only M-Audio audio interface installed on your computer, Session selects Fast Track USBs ASIO driver automatically.
Fast Track USB and Macintosh Audio
The Fast Track USB supports Mac OS X Core Audio protocol. To select the Fast Track USB as your systems audio device: 1. 2. Under the Apple menu, select System Preferences / Sound. Select Fast Track USB under input and output tabs to choose the Fast Track USB as your default audio device.
When recording with standard DAW applications, the Fast Track USB microphone input is displayed as INPUT 1 and the Guitar/Line input is displayed as INPUT 2.

Warranty Terms & Registration

Warranty Terms

M-Audio warrants products to be free from defects in materials and workmanship, under normal use and provided that the product is owned by the original, registered user.Visit www.m-audio.com/warranty for terms and limitations applying to your specic product.

Warranty Registration

Thank you for registering your new M-Audio product. Doing so immediately both entitles you to full warranty coverage and helps M-Audio develop and manufacture the nest quality products available. Register online at www.m-audio.com/register to receive FREE product updates and for the chance to win M-Audio giveaways

Specications

mic in (balanced): maximum input: signal-to-noise ratio: dynamic range: THD+N: variable gain: frequency response: -2.2dBu 100dB (a-weighted) 100dB (a-weighted) 0.005% (-86dB) @ -1dBFS 50dB 20Hz - 20kHz, +/-0.2dB @ 48kHz 5line out (unbalanced): maximum output: signal-to-noise ratio: dynamic range: THD+N: frequency response: +2.0dBV 104dB (a-weighted) 104dB (a-weighted) 0.004% ( -88dB) @ -1dBFS 20Hz - 20kHz, +/- 0.2dB @ 48kHz
headphones (32 Ohm load): maximum output: signal-to-noise ratio: THD+N: sampling rates (k): 2.1Vpp (-2.5dBV) 103dB (a-weighted) 0.075% @ -2dBFS 44.1kHz, 48kHz
instrument in (unbalanced): maximum input: signal-to-noise ratio: dynamic range: THD+N: frequency response: line in (balanced): maximum input: signal-to-noise ratio: +2.1dBV 98dB (a-weighted) +3.2dBV 96dB (a-weighted) 96dB (a-weighted) 0.005% (-86dB) @ -1dBFS 20Hz - 20kHz, +/- 0.2dB @ 48kHz

Fast Track USB

Tested to comply with FCC standards FOR HOME OR STUDIO USE
WARNING: This product contains chemicals, including lead, known to the State of California to cause cancer, and birth defects or other reproductive harm. Wash hands after handling. 2006 Avid Technology, Inc. All rights reserved. Product features, specications, system requirements and availability are subject to change without notice.Avid, M-Audio and Fast Track USB are either trademarks or registered trademarks of Avid Technology, Inc.All other trademarks contained herein are the property of their respective owners.

M-Audio USA

5795 Martin Rd., Irwindale, CA 91706

M-Audio Germany

Kuhallmand 34, D-74613 Ohringen, Germany

Technical Support

web: tel (pro products): tel (consumer products): fax (shipping): www.m-audio.com/tech (626) 633-9055 (626) 633-9066 (626) 633-9032 sales@m-audio.com 1-866-657-6434 (626) 633-9070 www.m-audio.com

User Guide
Session with Fast Track USB User Guide

Introduction

Congratulations on your purchase of M-Audio Session with Fast Track USB: an audio interface and software package designed for easy integration with your computer. The M-Audio Session software for Windows contained in this bundle allows you to make professional-sounding songs and remixes the first time you open the software even if youve never played a note before. If you have some musical experience, Session can take your ideas to the next level with a built-in virtual synthesizer and studio quality effects. The included Fast Track USB is a quality audio interface for Windows or Mac OS X. It features an XLR microphone input, a TRS line/instrument input, stereo RCA outputs, and a headphone output. It uses the convenience of USB connectivity, so theres no need to disassemble your computer and no bulky external power supply. Fast Track USB gives you full 24-bit digital audio, supporting popular 44.1kHz and 48kHz sampling rates. With its lightweight form factor and compact design, you can carry it with you anywhere. We recommend you spend a few minutes reviewing this User Guide to ensure proper setup.
Session with Fast Track USB Features
Session Software (PC only):
D-quality multi-track audio and MIDI C recording software built-in studio quality effects uilt-in virtual synthesizer with b hundreds of instrument sounds includes over 3.5 GB of content for professional music creation
Fast Track USB Audio Interface:
ingle USB connection for input, s output, and power onvenient front-panel headphone c output balanced XLR and 1/4 inputs wo line-level RCA outputs t ignal and peak LED input s indicators igh-quality 24-bit/48kHz recording h

Whats in the Box?

Your M-Audio Session with Fast Track USB bundle should contain the following items:
M-Audio Fast Track USB audio interface M-Audio Session DVD-ROM USB cable This User Guide
If any of the above listed items are missing, please contact the retailer where you purchased the product.

About This Guide

This guide covers installation of the Session music-creation software for Windows and the setup and features of the Fast Track USB audio interface for Windows and Macintosh OS X. The Fast Track USB audio interface contained in this bundle can also be used with many Macintosh and Windows third-party music software applications like GarageBand, Logic Pro, and Ableton Live. Consult your softwares documentation for more information on this.
Minimum System Requirements
M-Audio Session Software (Windows Only) Windows XP
Windows XP (SP2) or higher * .6 GHz processor 1 ( PU speed requirement may be higher for laptops) C 512MB RAM GB free HD space for complete installation of Session 4 DVD drive AGP 4X or faster graphics ** 32MB video RAM 024 x 768 video resolution (1280 x 1024 recommended) 1 One native USB port
Windows Vista (edition) 32-Bit
Windows Vista (edition) 32-Bit .6 GHz processor 1 (CPU speed requirement may be higher for laptops) 1024 MB RAM GB free HD space for complete installation of Session 4 DVD drive AGP 4X or faster graphics ** 128MB video RAM 024 x 768 video resolution (1280 x 1024 recommended) 1 One native USB port
Windows XP (SP2) or higher * Fast Track USB Audio Interface
Intel Pentium / AMD Athlon 1 GHz or higher 512 MB RAM DVD drive One native USB port
Windows Vista (edition) 32-Bit Pentium III 1 GHz or higher 1024 MB RAM DVD drive One native USB port

Macintosh OS X

GGHz or higher Mac OS X 10.2.8 or later 512 MB RAM One Native USB port
*Home and Professional Edition only. Windows Media Center Edition is not currently supported. **Session does not support video cards based on any of the following chipsets: S3/VIA UniChrome, SiS EL315, Matrox Please also check the minimum system requirements for third party software applications that are to be used with your new M-Audio hardware, as they may be greater than the above.

Installation and Setup Overview for Windows
It is important that installation and setup take place in the following sequence (these steps are explained in detail in following chapters): 1. Install the Session music creation software. This software enables support for the Fast Track USB audio interface, and must be installed before Fast Track USB is connected. 2. Connect the Fast Track USB audio interface. This device not only serves as a high performance USB audio interface, but also as the copy protection key for Session. Fast Track USB must be connected for Session to launch.
Session Installation for Windows
NOTE: If you have already connected your Fast Track USB audio interface to your computer, please disconnect it before beginning the Session software installation. Leave the Fast Track disconnected until instructed to connect it. 1. Insert the M-Audio Session DVD-ROM into your computers DVD-ROM drive. 2. The computer will automatically display the install screen. If your computer fails to launch the installer, manually start it by clicking on Start > My Computer > Session. 3. Follow the software installers on-screen direction prompts. 4. Session comes with a large library of loops and instrument samples for music creation, known as Session Content. During the installation process, you will be asked if you would like to install this content, as well as the Session Application, and the driver for the Fast Track USB audio interface. You must select the Session Application and the Fast Track USB options in order to use Session. NOTE: Sessions Factory Content Library requires approximately 4 GB of disk space and may take as long as 30 minutes to install. This behavior is normal. If you do not have 4 GB of disk space available, you can choose not to install the Session Content, but you will then have to place the Session DVD in your DVD-ROM drive whenever you run Session. Accessing Sessions content via the DVD-ROM drive results in slightly slower computer performance, and if the required hard drive space is available, installing the Session Content on your computers hard drive is recommended.
5. various points in this installation process, you may be notified that the driver being At installed has not passed Windows Logo Testing, or asked whether the program you wish to run is a trusted application. Click Continue Anyway or Install to proceed with installation.
6. Click Finish once the installer has completed the installation. See chapter "Connecting the Fast Track USB Audio Interface" to proceed with the hardware installation. NOTE: To get the most out of your Session music creation software, please refer to the programs built-in User Guide under Help > Manual, where you will find detailed instructions and 12 in-depth tutorials on using the Session software.

M-Audio Fast Track USB - Macintosh Driver Installation
The included M-Audio Session software is for use with Windows computers only. However, the Fast Track USB hardware can be used on Macintosh computers with applications like GarageBand, Logic Pro, and Ableton Live. Fast Track USB functions as a class-compliant device. This means your Macintosh computer will recognize Fast Track without the need to install additional drivers. This gives immediate access to all audio inputs and outputs. However, if you wish to use your Fast Track USB with Pro-Tools M-Powered software, you need to download and install Fast Track USB OS X drivers from www.m-audio.com Installing Fast Track USB drivers on your Macintosh computer: NOTE: Do not connect your Fast Track USB to your computer until the appropriate driver files have been copied to your hard drive. Be sure to leave your Fast Track disconnected until instructed to connect it below. 1. Download the latest Macintosh driver for Fast Track USB from www.m-audio.com under the Support > Drivers page. 2. Once the driver has finished downloading, double-click the file to run it.
3. The driver installer will launch. Follow the on-screen direction prompts. During Installation, Mac OS X will ask you to enter your user name and password. Enter this information and click OK to confirm. If you have not configured a password for your computer, leave the password field blank and click OK. If you are not the computers owner, ask the owner or your Administrator for the missing information. 4. 5. 6. Click Restart once the installer has completed the installation. Connect your Fast Track USB to your computer using the USB cable provided. Your Fast Track USB audio interface is ready to use.
Connecting the Fast Track USB Audio Interface
Fast Track USB is compatible with Windows and Macintosh class-compliant USB drivers, and will function as soon as it is connected to your computer. However, for the best low-latency performance in Windows, you will need to install the M-Audio drivers. Once you have completed installing the Session software in Windows, connect the M-Audio Fast Track USB to an available USB port on your computer. Your computer will recognize the new hardware and Windows computers will briefly display a Found New Hardware message. You may be prompted with a message that the driver being installed has not passed Windows Logo Testing, or asked whether the program you wish to run is a trusted application. Click Continue Anyway or Install to proceed with the installation. You may also see a Windows prompt asking if you would like to search the Internet for a driver. If so, click No and continue. Mac users can simply connect the Fast Track USB interface and start using the device. NOTE: In order to hear the audio signal produced by Fast Track USB, you must either: 1. Connect the two RCA outputs (located on the Fast Track USB rear panel) to powered monitors, an amplifier, or a mixer. Or 2. Connect headphones to the headphone output, located on the front panel.

The Fast Track USB Audio Interface

Front Panel Controls

Input Level Adjusts the gain level for the rear-panel XLR input (14).
2. Peak LED Indicates presence of peak input level from the XLR input. Lights when input signal approaches 3dB before overload. 3. S ignal LED Indicates presence of input signal from the XLR input. Lights when input signal level approaches 40dB.
4. Input/Playback Mix Control Controls the ratio of input signal to playback signal from your recording software. (When you record, you should mute the track youre recording. Otherwise, youll hear the analog input signal AND latency delayed recorded signal.) 5. Mono Switch When pressed, this switch sums the input signals to mono for direct monitoring. 6. Headphone Output Standard 1/8 stereo headphone output. 7. Output Level Adjusts overall output volume level. This control affects both the rear panel RCA outputs (11) and the headphone output (6). 8. Power LED Lights when the unit is powered on.

Rear Panel Controls

9. Kensington Lock Connector Connect a standard laptop-style cable locking device here to protect your Fast Track USB from theft or accidental breakage. 10. USB Connector Connect the included USB cable here, and connect the other end to your computers USB port.
11. Line Outputs Left and Right stereo outputs. Connect these outputs to powered monitors such as the M-Audio DX4s, or to the inputs of your stereo amplifier or receiver. 12. Input Level Switch Input level selector for the 1/4 TRS input (13). When connecting a balanced line level input here, the switch should be set to the LINE position. When connecting an instrument, the switch should be set to the GUITAR position. 13. Guitar Input TRS 1/4 input for line/instrument level input sources. The input level is determined by the Input Level Switch (12). 14. Mic Input Balanced XLR input for connecting a dynamic microphone.
The Software Control Panel
In Windows XP and Vista, double-click the red M-Audio icon in the system tray to access the Fast Track USB Control Panel. To access this Control Panel on a Mac, click the Apple icon, and open System Preferences. In the "Other" section, you will find the M-Audio Fast Track USB icon that you can click on to open the Fast Track USB Control Panel. The control panel is only available if the optional drivers have been installed on your Mac and will not appear when using the device via the Operating System's built-in class-compliant drivers. The Fast Track USB Control Panel is divided into separate pages, each accessible by clicking on the corresponding tab. The Control Panel shows details about the installed driver version, lets you select the Sample Bit Depth (Mac OS X only), and in Windows, you can adjust the audio buffer size (latency).

About Tab

This tab will show you the current Control Panel, driver and firmware versions, and allow you to connect to the M-Audio website for updates. The Fast Track USB Control Panel also provides helpful links to the M-Audio websites knowledge base, manuals, support, and registration pages.
Latency Tab (Windows Only)
The Latency Page allows you to adjust the Fast Track USB buffer size in order to achieve optimal balance between system stability and audio latency. When recording to your computer, you will experience a short delay between the time you create a sound and the time you hear it in your headphones or monitors. This is due to the time it takes for your input signal to pass through your audio software and appear at the outputs, and is referred to as Latency. Using the slider on this page, you can control the amount of latency you experience by changing the buffer size. Smaller buffer sizes result in lower latency, but may not function well with slower systems. The default buffer size setting may adequately serve your purposes, but if you wish to, you can experiment with lower settings. If you experience stuttering or crackling in your audio playback, try using a larger buffer size.
Performance Tab (Mac OS X only)
This tab allows you to set the sample bit depth Fast Track USB uses for operation. The 16 Bit setting is equivalent to the dynamic capabilities found on audio CDs. The 24 Bit setting allows for higher dynamic resolution as commonly used in professional digital recording studios. In Windows XP and Vista, the sample bit depth is selected from within the recording application.
Getting Started Making Music with Session
NOTE: The Fast Track USB audio interface acts as an authorization key for the Session software. Session will not run unless Fast Track USB is connected and its drivers installed. 1. Turn down the Mic Input and Output knobs on the Fast Track USB and connect a microphone or instrument to the appropriate rear-panel input on the Fast Track USB. 2. Double-click the Session shortcut icon that was placed on your desktop during installation. If this icon does not appear, go to Start > All Programs > M-Audio > Session > Session to open the application. 3. Click the button labeled New in the Session Startup window.

4. New Composition dialog box will appear A enabling you to choose a Name, Time Signature, Key Root, Key Scale, and Tempo for your composition. After these choices have been made, click OK.
5. The What would you like to do? dialog box will now appear. For this example, select Sing and Record Vocals/ Instruments, and click OK.
6. The Session window will now appear.
7. Click the Track Properties button and select the Right or Left input depending on whether you are using the XLR Microphone jack (Left input), or the 1/4" Instrument Input (Right input). 8. Turn the Mic Input and Output knobs up to a reasonable level. 9. Click the Record button (located at the top of the Session window) and speak or sing into the microphone, or play your connected instrument. The sound you are recording will appear as a waveform in the Session window. When recording using a microphone, it is recommended that any connected speakers are muted, and monitoring is done through headphones. This prevents feedback which can be damaging to your speakers and harmful to your hearing. Enjoy your music making experience with Session. NOTE: To get the most out of your Session music creation software, please refer to the programs built-in manual under Help > Open User Manual, where you will find detailed instructions and 12 in-depth tutorials on using the Session software.
Fast Track USB Specifications
All audio specs measured at 48kHz sampling rate, unless otherwise stated.
Mic Input (A/D) Maximum Input Level SNR Dynamic Range THD+N Frequency Response Pre-amp Gain Instrument Input (A/D) Maximum Input Level SNR Dynamic Range THD+N Frequency Response Line Input (A/D) Maximum Input Level SNR Dynamic Range THD+N Frequency Response Line Outputs (D/A) Maximum Output Level SNR Dynamic Range THD+N Frequency Response Headphone Output (D/A) Maximum Output Working Range Sampling Rates (k): -2.3 dBV at THD < 0.05% into 32-Ohms 32 to 600 Ohms 44.1kHz, 48kHz +2.0 dBV (1.2 Vrms), unbalanced -105 dB, A-weighted 105 dB, A-weighted 0.004% (-88 dB) @ -1 dBFS, 1 kHz 22 Hz to 22 kHz, +/- 0.1 dB +2.3 dBV (1.3 Vrms) -98 dB, A-weighted 98 dB, A-weighted 0.005% @ -1 dBFS, 1 kHz 22 Hz to 22 kHz, +/- 0.2 dB +8.3 dBV (2.6 Vrms) -97 dB, A-weighted 97 dB, A-weighted 0.005% (-86 dB) @ -1 dBFS, 1 kHz 22 Hz to 22 kHz, +/- 0.3 dB -2.2 dBu (0.6 Vrms) @ minimum gain -100 dB, A-weighted 100 dB, A-weighted 0.005% (-86 dB) @ -1 dBFS, 1 kHz 22 Hz to 22 kHz, +/- 0.1 dB 45 dB

Additional Information and Support
More information about your new Session software can be found in Sessions built-in help menu. The M-Audio website (www.m-audio.com) contains useful links to news stories, FAQs, and technical support. We recommend checking this site regularly to ensure you have the most current information about your M-Audio products.

Warranty

Warranty Terms M-Audio warrants products to be free from defects in materials and workmanship, under normal use and provided that the product is owned by the original, registered user. Visit www.m-audio.com/warranty for terms and limitations applying to your specific product. Warranty Registration Immediately registering your new M-Audio product entitles you to full warranty coverage and helps M-Audio develop and manufacture the finest quality products available. Register online at www.m-audio.com/register to receive FREE product updates and for the chance to win M-Audio giveaways.

Fast Track USB

Tested to comply with FCC standards

FOR HOME OR STUDIO USE

WARNING: This product contains chemicals, including lead, known to the State of California to cause cancer, and birth defects or other reproductive harm. Wash hands after handling. 2007 Avid Technology, Inc. All rights reserved. Product features, specifications, system requirements and availability are subject to change without notice. Avid, M-Audio, Session, DX4 and Fast Track USB are either trademarks or registered trademarks of Avid Technology, Inc. All other trademarks contained herein are the property of their respective owners.

M-Audio USA

5795 Martin Rd., Irwindale, CA 91706
M-Audio USA Germany M-Audio Technical Support Technical Support
5795 Martin Rd., Irwindale,D-74613 Ohringen, Germany Kuhallmand 34, CA 91706

Technical Support

web: tel (pro products): tel (consumer products): fax (shipping): www.m-audio.com/tech (626) 633-9055 (626) 633-9066 (626) 633-9032

e-mail:

www.m-audio.com/tech support@m-audio.de (626) 633-9055(0)7941 - 9870030 +49 (626) 633-9066(0)70070 +49 (626) 633-9032 info@m-audio.de sales@m-audio.com +49 (0)7941 1-866-657-6434 +49 (0)70070 www.m-audio.de (626) 633-9070 www.m-audio.com
tel (pro products): tel: tel (consumer products): fax: fax (shipping): Sales
e-mail: tel: fax: sales@m-audio.com 1-866-657-6434 (626) 633-9070 www.m-audio.com

e-mail: tel: fax:

M-Audio U.K.
Floor 6, Gresham House, 53 Clarenden Road, Watford WD17 1LA, United Kingdom
M-Audio Canada 1400 St-Jean M-Audio U.K. Baptiste Ave. #150, Quebec City, Quebec G2E 5B7, Canada
Floor 6, Gresham House, 53 Clarenden Road, Watford WD17 1LA, United Kingdom Technical Support
e-mail: tel:(Mac support): tel: (PC support): support@maudio.co.uk +44 (0)+44 (0)1309 671301