INSTALLATION

Installing and connecting the DOMO Telephone.
So that the handset stays in place when the apparatus is hung on a wall, it is necessary to take remove and rotate the piece of assembly as shown in the figure.
This telephone should only be connected to lines that have Multifrequency.
Connection Connect the longest end into the of cord to the telephone base and the other end in the hand piece as shown in the figure. handset Connecting Connect the end of the input cable to the telephone the apparatus and the other end into line the socket of the phone plug. If you need to increase the apparatus Assembly of inclination on the table, insert the base base stand support bar into the apparatus and press until it clicks into place. Adjust the cables under the apparatus to exit in the best direction. Assembly of Fix a base support (optional) for wall hand piece assembly, if necessary. Use the template provided with the base support, to mark the two holes to be drilled in the wall. Connect the cable of external line in the screws located inside base. Connect the cable of telephone line in the connector so it is housed internally. Wind up surplus in the flukes as shown in the figure.

TELEPHONE SETTINGS

Once connected to the telephone line, you may need to change phone settings to suit your own requirements. You can change the ringtone and volume of the bell, adjust the viewer contrast, to program the hour and date, to activate or disable the tones of confirmation, validation and error, and to select the Code of Operator of Telefnica. These adjustments are carried out with the telephone handset down and by pressing the Marcar/Men key (21) repeated times until selected function is displayed in the viewer. Selection of Press the Marcar/Men key (21) until the melody the message appears in the viewer. tones (20) one With the keys cursor of the three available ring tones can be selected and will be heard during selection. Press Desactivar/Salir (4) when selection is complete. Selection bell level sound Press the key Marcar/Men (21), until the Timbre option is shown in the viewer. (20), select high With the keys level or low level of sound. In the viewer the selected level will be shown as a message, and with an Black bell icon (high) or half Black bell (low).

Grabar R/A - a

Press the Rellamada/Pausa (13) key. Use the cursors keys the number to be called. (20) to find

GRABAR NOMRE

Once selected (you can put down the handset or use the hands free function), press the Marcar/Men (21) key. Automatic Dialling from the List of Calls. The DOMO Messages Hands Free has a list of the last 50 calls (incoming and outgoing) in chronological order. To initiate this list, make sure that you have ordered the caller Identification Service. To automatically ring a number from the stored list, do the following -

FERNANDO ARAG

For example, to enter the letter S, press the 7 key quickly four times. Press the Grabar key (10) again to record the name in the phonebook. The viewer will display this message Enter the telephone number associated with the name in up to 24 digits. To conclude, press the Grabar key (l0) to record the number. The viewer display will now request the next name.
If the stored number has a name associated with it, you can modify it by typing it again. To conclude it press Grabar key (l0).

GRABAR NUMERO

Using the Phonebook
Press the Agenda key (9). Press the (7) key, which is the initial of the name you want to find, or several times, until in the viewer the first name is displayed. If there is more than one name starting with that letter, press the cursor keys (20) until it is found. If the number shown has more than will be 15 digits, the symbols displayed to indicate that there is additional information, which will be shown after 4 seconds. On the third line of the viewer, the number of the alphabetical position in the phonebook, will be displayed. You can abandon the operation at any time by pressing the Desactivar/Salir key (4). With the Handset up or down, or the hands free function disabled or activated: Press the Agenda key (9). Press the (7) key, which is the initial of the name you want to find, or several times, until in the viewer the first name is displayed. If there is more than one name starting with that letter, press the cursor keys (20) until it is found.

912397657

GRABAR NOMBRE
Recording of the rellamada in the calendar
If you need to, you can enter another name and number using the previous instructions. If you have no more to be entered, press the Desactivar/Salir key (4) to return to the normal display. With the handset down or picked up, press the Rellamada/Pausa key (13). (20) to select Press the keys cursor the number that you want to record in the Phonebook.

912397657234234 P:01

912397657 P:01
Recording Press the Grabar key (l0) and the of the viewer will display rellamada in the calendar Type the name and press the Grabar key (l0). The telephone will store the name and number.
With the handset down or picked up, or the hands free function disabled or activated, press the cursor keys (20) until you can see the number you want to record in the Phonebook. Press the Grabar key (l0) and in the viewer this message will be displayed. Type the name and press the Grabar key (l0). The telephone will store the name and number.

MIGUEL_

Once the number is selected, put down the handset, or activate the hands free function, and press the Marcar/Men key (21) and the number will be dialled. Deleting a Phonebook entry While looking at a Phonebook entry, pressing the Borrar key deletes that entry. In the viewer a request for confirmation will be displayed. Press the # key to confirm, or press Desactivar/Salir (4) to cancel.
You can also press the Green key (18) with the handset down, to dial the number, to pick up the handset or to activate the hands free function and to press the Marcar/Men key (21).

CONFIRMAR CON #

If it begins to dail after you put down the handset in active hands free function, press the Green key (18) followed by the number.

OPERADOR

MUTE FUNCTION
During a call it is possible to turn off the sound to the speaker so that the speaker cannot listen to you. To activate it:

DIRECT SERVICES KEYS

With the handset up or down and with the hands free function activated, listen for the dialling tone. Press the Blue key (16). See the viewer display. With the handset up or down and with the hands free function activated, listen for the dialling. Press the Red key (19). See the viewer display. Dial the number of the Telefnica service required and with the handset up or down and the hands free function activated, press the Green key (18). The number of the Telefnica service required will be prefixed to the number you dialled and the call will be started.

EMERGENCIA TELEFONICA

Press the Mute key (14) during a conversation.
In the viewer this message will be displayed. The Red light will blink slowly. To disable this function and recapture the conversation again, press the Mute key (14) again. In the viewer this message will be displayed momentarily. During the period while the Mute is activated, you can use any of the functions that you would normally carry out with the taken handset down or the active hands free function.

MUTE ACTIVO

MUTE INACTIVO

1077912397657

LISTENING TO A CALL
When a call is received, the sound will be that of the pre-selected tone and volume. At the same time the Red light will be blinking. To enter into conversation with the caller, pick up the handset or activate the hands free function. If you have requested the Caller Identification Service, you will see the telephone number of the person calling displayed in the viewer. For more information on this service, see page 20 of this manual.
press the ))) key (11). The handset is disabled and the conversation continues in the hands free mode. The viewer will display this message after a few seconds To return to using the handset, simply ))) key again (11). press the

MANOS LIBRES

HANDS FREE FUNCTION
The DOMO Messages Hands Free phone incorporates a speaker (15) and a microphone (12) that allows you to speak and listen to the caller without having to ))) key (11) will toggle this option between active and pick up the handset. The disabled. All the functions of the phone will remain active during the conversation in the hands free way. Activation of hands free mode
You can activate the hands free option by pressing the ))) key (11) while the handset is operating in picked up mode. The Red light shows the hands free mode is in operation, and you can communicate with the caller (to See remote 8) or begin a new call by means of the dialling procedures described previously.
Deactivating While in the hands free mode, you can the hands free end your conversation by pressings the mode while in ))) key (11). If however you are using conversation the telephone with the handset picked up, you should press the ))) key (11). Either way, the indicator light will go out.
During a conversation in hands free Adjusting mode, you can adjust the volume of the the volume speaker by pressing one of the cursor of the speaker keys (20) until in the viewer the message is displayed (Corresponding to the last level of recorded volume ). Next you can increase the volume by pressing the cursor key (20) or diminish the volume by pressing the cursor key (20). During a conversation while using the handset, you can adjust the volume of Adjusting the the headphone. To do this press one of keys (20) until this volume of the the cursor message is displayed in the viewer. handset (Corresponding to the last level of recorded volume), Next you can increase the volume by pressing the cursor key (20) or diminish the volume by pressing the cursor key (20). You will notice that the volume adjustments of the speaker and headphone are set independently.

VOLUMEN:

Changing If during hands free conversation it is hands free necessary to pick up the handset, the mode during viewer shows this message during the conversation following seconds.
If while maintaining a conversation using the handset, you want to continue the same one in hands free mode,

MICROTELEFONO

IDENTIFICATION OF CALL SERVICE
Requesting the Identification of Call service allows you to see in the viewer the callers number (or name). This number remains displayed before you answer the call and during it. It is necessary to have the Messages of Text (SMT) service activated.
When receiving the call, the number of the caller is displayed. If the callers number coincides with one of those stored in the Phonebook, and there is an associate name with that number, the recorded name only will be displayed. When picking up the handset or using the hands free mode, the number associated with that name will be displayed. The hour and current date are also displayed, which can be viewed at a later time. The number or name is displayed during the whole conversation, disappearing on hanging up the handset or disabling the hands free function, or if you perform another operation during the conversation. There may be a number of reasons for the information not to be displayed in the viewer. They could be - The caller doesnt want to be identified. - The identity of the caller cannot be assertained (an example could be international calls). - The call is made from a public telephone (from a different network).
NUMERO PRIVADO No NO DISPONIBLE TELEF. PUBLICO 912397657
When new calls are received the Red indicator light will flash to indicate a call is waiting to be answered. The indicator light will switch off automatically when the call is answered or the caller rings-off. The phone can store up to 50 calls (received and outgoing) and it can update them with the handset picked up or with the hands free disabled or activated. (20) to move Viewing the Press the key incoming and through the list of calls from the most recent to the oldest or vice versa. outgoing calls. The viewer will display * On the first line is - the record number in the list.

Contestador Mensajes Desactivar

Aceptar LL.Espera Desvio

Salir LL a Tres

917404119

- if the call was outgoing or incoming, and if it is an assisted incoming call.
- Telephone number. If the number coincides with one of those stored in the Phonebook and where there is an associate name, it will display the name first, and later the number after a few seconds. If the number displayed is longer than that which will fit in the viewer, the symbols or , will be shown indicating that you can assess the remainder by using those keys.
Information With the handset picked up and with in the viewer the hands free function disabled, the viewer displays the hour and date, the (when the indicator light total number of stored calls (received and outgoing), the number of new is not lit) received calls from the last time it was inspected, and the number of received calls that have been repeated.
On the second line of the viewer - Hours and dates (day and month) the time the call was received or a call was made. - Indication of a repeated call. If you want to make a call to any of the stored numbers with the handset picked up or in activate hands free function mode, press the Marcar/ Men key (21). The numbers on those that you have dialled or assisted calls, are shown with a tick symbol P to the right of the caller. To return to the normal display, press the Desactivar/Salir key (4) followed by a or key (20) and allow time for it to happen.
Make a Record The procedure is described in in the Using the Phonebook starting on Phonebook page 13. from the list of received calls

SUPPLEMENTARY SERVICES

The following Supplementary Services have to be requested before they can become available. Activation

01 FRANCISCO

Diverting Incoming Calls
With the handset picked up or the hands free function activated, press the Desvio key (23). Type the number that is to receive your diverted calls. Press the Desvio key again (23).

PULSE No + DESVIO

Deleting Calls
Deleting Call records Whilst looking at the Call entries in the viewer, you can erase the current entry by pressing the Borrar key (17). It will be necessary to confirm the deletion of the entry by pressing the # key. Deleting all Call records With the handset picked up and hands free function disabled, press the Borrar key (17) If call entries are not currently being viewed, and are not displayed in the viewer, confirmation is requested with the # key. If you have not viewed all the received calls, you wont be able to erase them. If you want to cancel the operation, press the Desactivar/Salir key (4).

BORRANDO

While the diversion number is activated, an icon will be displayed. When picking up the handset or in the hands free mode, the number displayed will be the one that the calls have been diverted. While this service is activated, you cannot receive Text Messages (SMT). Deactivation With the handset lifted or the hands free function activated Press the Desactivar/Salir key (4). Press the Desvio key (23).

DESVIO

DESV. O CONTES? DESVIO INACTIVO

LL. SIN REVISAR

The icon will cease to be displayed in the viewer.
IMPORTANT: The Redirect and Answering Machine can only be activated or deactivated from your own DOMO Hands Free telephone. If you attempt to activate and deactivate from different telephone or by means of the direct dialling codes of performance from a keyboard of the services, the telephone viewer will not indicate the correct situation of the service. Also if some failure of the telephone network takes place during the selection of these services, once again the viewer will not shown the correct situation. To change the language of this service to English - see page 43. ANSWERING Activation MACHINE Pick up the handset or using the hands SERVICE free function Press the Contestador key (2). The Answering Machine icon will be displayed in the viewer. Deactivacion Pick up the handset or using the hands free function Press the Desactivar/Salir key (4). Press the Contestador key (2). The Answer Machine icon will cease to be displayed.
DESV. O CONTES? CONTES. INACTIVO
The Indicator Light will switch off after a certain time when a messages is received from another telephone.

CALL WAITING

During a conversation you can receive a second call. You will hear tones superimposed over your conversation and the viewer will display the callers number (if available from the telephone network and providing Call Identification has been requested). To take the call Press the Ll Espera key (22). Wait a moment. In the viewer this message will be displayed. To get back to the first caller, press the Ll Espera key (22). Wait a moment. Pressing this key again will allow you to talk with alternate callers. To end the active conversation Press the Desactivar/Salir key (4) Press the Ll Espera key (22). Wait a moment.
PILSE LL. ESPERA LLAM. RETENIDA

CONTEST.ACTIVO

ACCESSING the ANSWERING MACHINE
If you have received calls and messages that were stored in the Answering Machine, the indicator light will be lit in the viewer and a suitable message will be displayed (if the telephone network provides one). To listen to messages Pick up the handset or using the hands free function, press the Mensajes/ Aceptar key (3). In the viewer this message appears -

MENSAJES VOZ

You can have a conversation with MAKING A THREE-WAY two people on different lines. CALL To enter into a three-way conversation during a call Press the LI. a Tres key (5). Type the second speakers number. Once in conversation with the second person, press LI. a Tres again (5).

PULSE NUMERO

OIR MENSAJES
In the viewer this message will be displayed together with these words The telephone network will confirm that the function has been activated with a periodic tone. To conclude the three-way call, hang up the handset or disable the hands free function. At any time you can separate the two conversations Press the Ll Espera key (22) and wait a moment. Each press of the Ll Espera key (22) will toggle between the other callers. If during a communication you receive a second call, you can enter into a three-way conversation After pressing the Ll Espera key (22), wait a moment. Press the Ll a Tres key (5). The process is the same as in the previous case. Once separated, the two conversations can completed with the one that is in course Press the Desactivar/Salir key (4). Press the Ll Espera key (22) and wait a moment.

LLAM. A TRES

TEXT MESSAGING (SMT)
The DOMO Hands Free Messages telephone allows you to use the Text Messaging service provided by the telephone network. This allows for - Receiving text messages (SMT) coming from other fixed terminals or mobiles or from email addresses (*). - Send text messages (SMT) to other fixed or mobile phones, and to email addresses and Fax telephones (*). (*) the telephone network may not offer all these options. If two or more telephones are connected to the same line, to text messages, each extension must be given a different extension number which must be between 1 and 9. As standard, the DOMO Hands Free Messages telephone is programmed at the factory with the extension as 1. If it is necessary to change this number, see the section on Change of Extension on page 29. PLEASE NOTE: The relative information regarding the extension number for text messages purposes is displayed in the viewer in the following way - If the extension number appears in brackets, the phone cannot receive messages as another telephone exists with the same extension number. If it is the only extension with that number, the extension number will be displayed without brackets. - If the extension number appears without brackets, the telephone you will receive messages on will be number 1.

ENVIAR: SI

ENVIANDO ENVIAR: NO
When the E-mail option is displayed in the viewer, press the Mensajes/ Aceptar key (3). Type the email address and press the Mensajes/ Aceptar key (3) again. This message will be displayed To send the E-mail, press the Mensajes/Aceptar key (3) and this message will be displayed If you decide not to send the e-mail, press the cursor keys and (20) until this message is displayed Telefonica DOMO Telephone Manual in English
ENVIAR: E-MAIL DESTINATARIO

ENVIAR: SI ENVIANDO

ENVIAR: NO
Press the Mensajes/Aceptar key (3) and choose between the options to keep or erase. Press the Mensajes/ Aceptar key (3) again to confirm. 3. - To send a Fax When this message is displayed Press the Mensajes/Aceptar key (3). First the subject title will be requested (optional). Type this, if required, in up to 255 characters and press the Mensajes/Aceptar key (3) anyway. Next, the addressees number will be requested. Type it using the characters on the numeric keyboard (7) or select it from the Phone Book by pressing the Agenda key (9) and pressing the Mensajes/Aceptar key again (3). When this message is displayed To send the Fax, press the Mensajes/ Aceptar key (3). See this message If you decide not to send the Fax, use and until this the cursor keys message is displayed Press the Mensajes/Aceptar key (3), and select the option to keep or to erase the message by using cursor and keys (20) and pressing the Mensajes/Aceptar key (3) to confirm the selected option. If a message cannot be delivered, you will receive a message indicating the reason (disabled service, agreement doesnt exist with the operator, the extension doesnt exist, etc.). At any time during the above process, you can cancel the operation by pressing the Desactivar/Salir key (4).

ENVIAR FAX

RECEIVING MESSAGES
When a text message is about to be received, the telephone will produce a tone and display this message When the message is received, the telephone gives a second tone, indicating that the message has been received correctly, and this message will be displayed When a communication error happens, the message will be The existence of new messages is indicated in the viewer with flashing envelope. To read messages, press the Mensajes/Aceptar key (3) with the handset down and the hands free function disabled. The display will be -

ESPERE.

RECIBIDO

ERROR RECEPCION

ASUNTO?

DESTINATATIO

READING MESSAGES

MENSAJES TEXTO

ENVIAR SI ENVIAR: NO
Information about the message will be listed 1. The position of the message in the list. 2. Symbols ! or indicate if it is a new or saved message, respectively. 3. The characters or shows if it is an incoming or outgoing message. 4. Next, - if the message is incoming, and not private, the senders number or the name if it is in the Phone Book. - if it is a private incoming message, private users name will appear in brackets. - if the message is outgoing, the destination will appear which that can be, a telephone number or users name if it is in the Phone Book, a fax number or an Internet address.

Creating a group

To create a group, type the following message using the dialling keys (7) ##CRG#<Group Name> ## After creating the group, you will be sent a text message stating that the request has been accepted It has been created < Group Name >.

##CRG#TRABAJO##

SE HA CREADO TRABAJO

##BG#TRABAJO##

Adding a Depending on the destination, the Destination message format should be to a group
##A1#TRABAJO*91396 751*1*INMA##

SE HA BORRADO TRABAJO

To view the The message format should be defined ##CG## groups The confirmation of the requested action will consist of a text message with the names of the groups The groups are: <Group_Name> * <Group_Name_2> * * <Group_Name_N>. To view members of a group Type the following message ##CI#<Group_Name>## You will receive a message in which will include the members of group The members of <Group_Name> are: <data-of-member_1> * <data_of_member_2> *. * <data_of_member_N>. The fields that make up the data of the members, are separated with the symbols ;. To send a To send a message, type the following message to format a group ##E#<Group_Name>##<Message_Text> By following these actions you will be sending the message included in the command <Message_Text> to all the members in the group.

##CG##

CHANGE ANSWERING SERVICE LANGUAGE TO ENGLISH
Pick up the DOMO handset and press the key Contestador.
SUS GRUPOS SON: TRABAJO*AMIGOS* FUTBOL
When this message is displayed in the viewer, replace the handset. Now complete the following steps -

ACTIVO

LOS INTEGRANTES DE TRABAJO SON: 91396751;INMA*91255180; FRANCIS*91397657;ROSA
##E#TRABAJO## MANANA REUNION A LAS 11H
1. Lift DOMO handset and press the Mensajes key. 2. When the message you hear ends, press No.1 on the keypad. 3. When the next message you hear ends, press No.4 on the keypad. 4. Enter a four digit code of your choice e.g. 1234, which you must remember. 5. When the next message you hear ends, press No.3 on the keypad. 6. When the next message you hear ends, press No.1 on the keypad. 7. Finally, when the next message ends, press No.1 again. 8. Replace the handset. When the phone rings and you are unable to answer, the answer machine message will cut in after 5 rings. To retrieve messages, pick up the handset and press the Mensajes key. Follow the instructions which will now be in English.

If when sending a message, ERROR ENVIO is displayed in the viewer, consult the Troubleshooting section of this manual. If there is another reason for the error, a different message will be displayed, allowing you another attempt to send the message.

TROUBLESHOOTING

PROBLEM
If when sending a message, E-mail or fax, the message ERROR ENVIO is displayed.

MAINTENANCE

The DOMO Hands Free Message telephone doesnt require any special maintenance. To clean use a damp cloth. Do not use abrasives or solvents for cleaning as these could damage the equipment. Avoid blows and/or possible falls to the floor, and do not locate near sources of heat or exposed directly to the sun.

SOLUTION

Try pressing the Mensaje/Aceptar key (3) or to Cancel, press the cursor keys. You will be able to erase or to keep the message, E-mail or fax. In the first case you have not activated the Text Messaging service. ERROR DESTINO appears if the addressee has not activated the service. In either case, use the options to Keep the message and send it when the errors have been retified. The telephone has used up all available memory. Erase messages no longer necessary. Until this is done new messages cannot be sent or received. This message indicates that you already have the maximum number of 5 groups (lists). To create a new one you must first delete one or more of those already created. Reinstall and connect the phone directly in the PTR. If the problem persists, contact Telefnica. The redirection was not really activated and a call was received. Activate the deviation again. Make sure the cord to handset is correctly connected.
If, when sending a message, E-mail or fax, one of these messages is displayed ERROR, ACTIVESE or ERROR DESTINO

TECHNICAL SPECIFICATIONS

Minimum isolation resistance between earth and accessible parts Minimum dielectric strength Return losses Codes of dialling frequency Time Emission Time Pauses Duration of the temporised opening Time of pause between dialling 100 M 500V > 14 dB CCITT Q.23 `70ms 5% 140ms 5% 100ms 5% 25 5% limited

When pressing the Messages key the message POCA MEMORIA BORRE MENSAJES is displayed. If when trying to create a private list, the message MEMORIA LLENA is displayed.
The Viewer remains blank.
The redirection symbol is not displayed.
Time of maintenance of the Phone Book, lists of incoming calls, lists of outgoing calls with the disconnected telephone Code call-up identification
Nothing is displayed in the viewer when I pick up the handset. The telephone works perfectly but the viewer shows nothing. The ring (tone) is too quiet. The viewer doesnt show the callers identification. The telephone doesnt respond to the actions made by the user, as requested. Example: pressing keys, etc.
FSK ETSI 300 778-1 and 2 50/15/24 50/15/24

Modify the contrast.

Size available to list of callers: memory/characters/digits Size available to the Phone Book: memory/characters/digits
Change the volume. Check that you have activated the Identification of Calls service. Where it accepts actions, but the data, Phone Book, and other data stored in the telephone at factory configuration, do not respond. Hold down the 1 key followed by the 3 key, pick up the handset, stop to pressing the keys and then put the handset down.
Size available to list of messages: No. of Messages/Characters 50/80 or 25/160 Acoustic level of the call signal (high level) Total weight External size W x H x D: Operating temperature Storage temperature Maximum humidity 81 dBPWL 600 gr 226 x 63 x 149 mm O and 55C -2O and 70C 90%
Authors Note - There have been a number of users who confirm that their recorded message, and a changed date and time, are not retained in memory.

GUARANTEE CERTIFICATE

CONDITIONS OF GUARANTEE
The DOMO covered by this guarantee has been manufactured to normal standards of quality and has been subject to approved tests. In the event of non-conformity to the contact, the user will be able to exercise his rights under the conditions and fixed terms detailed under Law 2312003 of Covenants of ownership for the Sale of Goods of use, the right to repair, substitution, reduction of the price or change of contract. It will be necessary for the user to provide an invoice or delivery note. The user will be informed how the substitution of the DOMO will take place to conform with legal requirements.