Business IP DSL Self Installation Instructions for the Siemens SpeedStream 4100 Ethernet ADSL Modem
Before You Start These instructions assume a NIC (Network Interface Card) Ethernet Adapter is already installed on the workstation to be used to access the Internet via DSL. Please refer to your equipment vendor on how to properly install and configure the NIC. What comes out of the box The CPE (Customer Premise Equipment) box delivered to you will contain the following: A quick start guide containing a self installation CD The SpeedStream 4100 modem The Power Supply/Adapter The Ethernet cable (Yellow) The Data cable (Gray) One line splitter Three line filters One wall mount DSL filter If additional filters are necessary, they can be purchased from any local electronic supplies store. CPE Configuration and User Registration Process These instruction will take you through the inside wiring setup, the CPE configuration, and the User registration process. You should have already received an email with your User Name and Password. If you didnt, or if you misplaced it, call your support center at 1-866-920-5228, option 1 for assistance. 1. Place the CD in the drive 2. The setup program should start automatically. If it doesnt, click on Start, then Run and type in x:\Installs\setup.exe (where x is the drive letter of you CD-Rom drive)

3. Welcome Screen

4. Click on Next
5. Software License Agreement
6. Read the Software License Agreement and click on I Accept
7. Subscription Information
8. AT&T emailed the Username and Password to you separately. If you misplaced the information, please call your support center at 1-866-920-5228, option 1 for assistance. Make sure you have your order number, telephone number where the DSL is being installed, or the tracking number for this order to be properly identified 9. Once you have this information, click on Yes 10.

Login Screen

11. Type the Username and Password in the appropriate field 12. Click on Next 13.

Filters Installations

14. Click on Next
15. There are two types of filters in the box:

16. Click on Next

17. Locate the phone jack where you wand to install DSL

18. Click on Next

19. Plugging the filter into the jack

20. Click on Next

Plug any devices listed below into the side of the filter labeled as Phone

21. Click on Next

22. Connecting the data cable

23. Click on Next 24.

Installing filters on all other phones in the home

25. Click on Next

26. Installing filters on all other phone devices in the home

27. Click on Next

28. Connecting the DSL Modem
29. Click on Next A. To Bridge the Modem: 1. Access the PPP location screen by accessing the GUI. Click the Advanced Button Select the PPP Location button 2. Select one of the following options. PPPoE is on the Modem PPP is on the computer Bridged Mode (PPPoE is not used). NOTE: When the PPPoE on the modem or Bridge mode is selected a warning screen displays.
3. Select the option based on the following information: Bridged Mode PPPoE on the Modem 4. Modem restarts to save the settings. 5. Check if you can connect and browse. 6. If you are unable connect, refer to Siemens S100/4100 HSI Modem Cannot Access the GUI. B. To Reset the Modem (to be executed as a last resort): 1. Press the Reset button on the bottom of the 5100B and on the back of the 4100. LEDs should return to a Green state in about 60 seconds. Power LED Ethernet LED DSL LED 2. Open a browser and access the 5100B/4100 modem GUI using the URL http://192.168.0.1. ***Warning: Do NOT unplug the power cord and turn off the power. Do NOT turn off the modem using the power button during a Reset back to factory default. 30. The software will configure and train the DSL Modem 31. Close the installation program 32. Remove the CD from the disk drive and store in a safe location 33. Upon completion of this step, you will be able to access the internet by opening a browser and specifying a valid address (i.e. http://www.att.com) 34. If the process fails to install the modem correctly, or if you cant access the internet, call your support center at 1-866-920-5228, option 1 for assistance 35. Thank you for choosing AT&T as your broadband access provider 36. Happy surfing!