Teletext

Teletext (This service may not be offered, depending on the country)...27

Additional Information

Connecting Optional Equipment....28 Using Optional Equipment....30 Remote Control Configuration for VCR/DVD...31 Specifications.....32 Troubleshooting.....34

Safety Information

This set is to operate on a 220240V AC supply only. Take care not to connect too many appliances to the same power socket as this could result in re or electric shock.
For environmental and safety reasons, it is recommended that the TV set is not left in standby mode when not in use. Disconnect from the mains.
Never push objects of any kind into the set as this could result in a re or electric shock. Never spill liquid of any kind on the set. If any liquid or solid object does fall through, do not operate the TV. Have it checked immediately by qualied personnel.
Do not open the cabinet and the rear cover of the TV. Refer to qualied service personnel only.
For your own safety, do not touch any part of the TV, power lead or aerial lead during lightning storms.
To prevent re or shock hazard, do not expose the TV to rain or moisture.
Do not cover the ventilation openings of the TV. For ventilation, leave a space of at least 10cm all around the set.
Never place the TV in hot, humid To prevent re, keep inammable objects or naked lights (eg or excessively dusty places. Do not install the TV where it may be candles) away from the TV. exposed to mechanical vibrations.
Clean the screen and cabinet with a soft, lightly dampened cloth. Do not use any type of abrasive pad, alkaline cleaner, scouring powder or solvent, such as alcohol or benzine, or antistatic spray. As a safety precaution, unplug the TV before cleaning it.
Pull out the power lead by the plug. Do not pull on the power lead itself.
Take care not to place heavy objects on the power lead as this could result in damage. We recommend you wind any excess lead around the holders provided on the rear of the TV.

Checking the Accessories Supplied

See page 32.

Overview of TV Buttons
2 (volume) +/ button (input select) button PROG (channel) +/ button
Power switch / (standby/sleep) indicator Remote control sensor
i Headphone jack Use headphones with L type connector. If you connect headphones, the TV speakers will automatically be muted.
Overview of Remote Control Buttons

VIDEO TV

! ! ! !
1 To Temporarily Switch Off TV: Press this button to temporarily switch off the TV (the / (standby/sleep) indicator on TV lights up). Press again to switch on the TV from standby mode. To save energy we recommend switching off completely when TV is not in use. 2 After a certain period without a signal and without any button being pressed, the TV switches automatically into standby mode (Auto Shutoff, page 25). Selecting input source: Press this button repeatedly until the desired 4 input symbol of the source appears on the TV screen. 3 Selecting channels: If Media Selector is switched on TV or VCR, press this button to select channels. 6 For double-digit programme numbers, enter the second digit within 2.seconds. 4 a)If Media Selector button is switched on TV: Press this button to watch the last channel selected (watched for at least 5 seconds). b)If Media Selector button is switched on VCR: For Sonys VCR double-digit programme numbers, e.g. 23, press -/- - first and then the 9 buttons 2 and 3. ! 5 This button only works in Teletext mode. 8 ! 6 Selecting screen format: Press this button repeatedly to change the format of the screen. For more details, refer to chapter Screen Control on page 16. 7 Selecting Teletext: Press this button to switch on Teletext. Teletex may not be available, depending on the country. 8 a)If Media Selector is switched on TV: When MENU is switched on, use these buttons to operate the menu system. For details refer to Introducing and Using the Menu System on page 13. b)If Media Selector button is switched on VCR or DVD: Using these buttons you can control the main functions of your VCR or DVD. 9 Recording button: If Media Selector is switched to VCR, press this button to record programmes.

REC TV

q; Media Selector: With this remote control you can operate not only this TV but also the main functions of your VCR or DVD. Switch on the device you want to operate and next press this button repeatedly to select the VCR, TV or DVD. A green light will be lit momentarily. An initial set up is required to synchronise this remote control to your VCR or DVD. It will depend on the Brand of those products. For more details, refer to chapter Remote Control Configuration for VCR/DVD on page 31. qa Selecting channels: Press these buttons to select the next or previous channel. qs Muting the Sound: Press this button to mute TV sound. Press again to restore the sound. qd Adjusting TV volume: Press these buttons to adjust the volume of the TV. qf Displaying the menu system: Press this button to display the menu on the TV screen. Press again to remove the menu display from the TV screen. qg Selecting TV mode: Press this button to switch off teletext or video input. qh Selecting Sound effect: Press this button repeatedly to change the sound effect. qj Selecting Picture mode: Press this button repeatedly to change the picture mode. qk Displaying on-screen information: Press this button to display all on-screen indications. Press again to cancel. ql VCR or DVD on/off: Press this button to switch your VCR or DVD on or off. Besides TV functions, all coloured buttons as well as green symbols are also used for Teletext operations. For more details, please refer to the Teletext section on page 27 of this instruction manual.

Inserting Batteries into the Remote Control
Make sure you insert the supplied batteries using the correct polarity. Always remember to dispose of used batteries in an environmentally friendly way.
Connecting the Aerial and VCR
Use the supplied AC cable. Use the supplied coaxial cable for aerial connection. Other connecting cables are not supplied.

R/D/D/D L/G/S/I

R/D/D/D L/G/S/I CTRL S AC IN

PB/CB/B PR/CR/R HD

(W/G/W/G) (SMARTLINK)
Connect the supplied cosxial cable. Connect the supplied AC cable.

OUT IN

Scart lead is optional. For more details of VCR connection, please refer to the section Connecting Optional Equipment on page 28 of this instruction manual.
Preventing the TV from Falling Down
Attach the supplied bracket to the rear of the TV, and pass a sturdy cord or chain through it to attach it to a wall or pillar. Consult your dealer when attaching the bracket, since the screws for the bracket also hold the rear cabinet in a place.
1 Remove one of the screws attached at the rear
of the TV. Do not remove both screws at the same time as these screws secure the rear cabinet. Never use the TV with the screws removed.
2 Attach the supplied bracket with the screw.
Be sure to use the screw that attaches the rear cabinet. A different screw may damage the TV and result in electric shock.

Bracket (supplied)

3 Repeat steps 1 and 2 to attach the other bracket. 4 Attach a sturdy cord or chain securely to each
bracket on the rear of the TV.
Attach the sturdy cord or chain (not supplied) securely.

continued.

5 Fix the cord or chain to a wall or pillar.

Side view Rear view

Screw a hook (not supplied) to the wall or pillar securely.
Switching On the TV and Automatically Tuning
The first time you switch on your TV, a sequence of menu screens appear on the TV enabling you to: 1) choose the language of the menu screen, 2) choose the country in which you wish to operate the TV, 3) search and store all available channels (TV Broadcast) and 4) change the order in which the channels (TV Broadcast) appear on the screen. However, if you need to change any of these settings at a later date, you can do that by selecting the appropriate option in the (Set Up) menu.
1 Connect the TV plug to the mains socket (220-240V
AC, 50Hz) The first time that the TV set is connected, it is usually turned on. If the TV is off, press the Power switch on the TV set to turn on the TV. The first time you switch on the TV, a Language menu displays automatically on the TV screen.

2 Press the

or button on the remote control to select the language, then press the OK button to confirm your selection. From now on all the menus will appear in the selected language.
Language Eng l i s h Espao l Franai s I t a l i ano Po r t u g u s Deu t s c h Nede r l a n d s S e l e c t language , to select, press

to set

3 The Country menu appears automatically on the TV
screen. Press the or button to select the country in which you will operate the TV set, then press the OK button to confirm your selection. If the country in which you want to use the TV set does not appear in the list, select - instead of a country. In case of changing the country selection (including -), the next procedure of Auto Tuning always should be done after that.
Coun t r y United Kingdom Espaa France Italia Portugal Deutschland Nederland Select country , to select, press
4 The Auto Tuning menu appears on the screen.
Press the OK button to select Yes.
Do y o u w a n t t o s t a r t automatic t uning? Ye s No
5 The TV starts to automatically search and store all
available broadcast channels for you. This procedure could take some minutes. Please be patient and do not press any buttons, otherwise the automatic tuning will not be completed. If no channels were found during the auto tuning process then a new menu appears automatically on the screen asking you to connect the aerial. Please connect the aerial (see page 8) and press OK. The auto tuning process will start again.
Auto Tuning 01 Programme : C21 Channel : I System : Conf Searching.
No c h a n n e l f o u n d. Please connect aer i al Conf i rm
After all available channels are captured and stored, the Programme Sorting menu appears automatically on the screen enabling you to change the order in which the channels appear on the screen.
If you wish to keep the broadcast channels in the tuned order, go to step 7. If you wish to store the channels in a different order: Press the or button to select the programme number with the channel (TV Broadcast) you wish to rearrange, then press the button. Press the or button to select the new programme number position for your selected channel (TV Broadcast), then press. Repeat steps b)1 and b)2 if you wish to change the order of the other channels.
Programme S o r t i n g 01 TVE TVE3 TV4 C5 C6 C7 S8 S06 S e l e c t channel , t o s e l e c t , OK to, set E x i t : MENU
Programme S o r t i n g 01 TVE TVE3 TV4 CTVE C6 C7 S8 S06 S e l e c t new pos i t i o n , t o s e l e c t , p r e s s OK t o r e t u r n E x i t : MENU
7 Press the MENU button to remove the menu from the

screen.

Your TV is now ready for use
Introducing and Using the Menu System
Your TV uses an on-screen menu system to guide you through the operations. Use the following buttons on the Remote Control to operate the menu system:
1 Press the MENU button to switch the first level menu on.
2 To highlight the desired menu or option, press
To enter to the selected menu or option, press To return to the last menu or option, press. To alter settings of your selected option, press To confirm and store your selection, press OK.

3 Press the MENU button to remove the menu from the screen.

Picture Adjustment

P i c t u r e A d j u s t ment Mode Con t r a s t B r i ghtness Colour Sha r p n e s s NR Dynami c P i c t : C o l o u r To n e : : Personal1 P i c t u r e A d j u s t ment Mode Con t r a s t B r i ghtness Colour Sha r p n e s s NR Dynami c P i c t : C o l o u r To n e : , set t o select , : Personal1
The Picture Adjustment menu allows you to alter the picture adjustments. To do this: After selecting the item you want to alter press , then press repeatedly / / or to adjust it and finally press OK to store the new adjustment. This menu also allows you to customise the picture quality for the Movie, Personal1, and Personal2 modes based on the programme you are watching.

Low On Cool to

Low On Cool ,
, t o s e l e c t , OK , e n t e r a d j. menu
Live (for enhanced picture contrast and sharpness). Standard (for a picture with contrast to suit your rooms lighting conditions.). Movie (for a finely detailed picture). Personal1 (for your own custom settings). Personal2 (for your own custom settings). Press Press Press Press / / / / to reduce picture contrast to enhance picture contrast to darken the picture to brighten the picture continued.

Contrast Brightness

Colour

Press Press

to decrease colour intensity. to increase colour intensity.
Colour cannot be adjusted for the RGB input. Sharpness NR (Noise Reduction) Press Press / / to soften the picture. to sharpen the picture.
Off/Low/Mid/High Select to reduce the noise level of all connected equipment. It is most effective on the signal from the VHF/UHF jack.
You cannot adjust NR (Noise Reduction) for equipment connected to the RGB input. Dynamic Pict Colour Tone On/Off Select to enhance the picture contrast. Cool/Normal/Warm/User1/User2/User3 Select to give bright colours a red tint (Setting is variable from Cool to Warm). Select User1, User2, or User3 to customise the Colour Tone by adjusting Red Gain, Green Gain, and Blue Gain (tint), and store them in memory. Name Set: Select to name your personal settings. Press / / / to select the letter, then press OK. Finally press / / or to select the word End on the screen and press OK to store. To correct the letter, select on the screen to go back and press OK. For a blank, select on the screen and press OK. Colour Correct On/Off Select to emphasise reds and blues.

Colour Correct cannot be adjusted for the RGB input. Gamma Correct High/Mid/Low Select to adjust the balance between bright and dark areas of the picture. Cancel/OK Select OK to reset the picture to the factory preset levels.
Each option cannot be adjusted when Mode is set to Live or Standard.

Sound Adjustment

P i c t u r e A d j u s t ment Mode Con t r a s t B r i ghtness Colour Sha r p n e s s NR Dynami c P i c t : C o l o u r To n e : : Personal1
The Sound Adjustment menu allows you to alter the sound adjustments. To do this: After selecting the item you want to alter, press , then press repeatedly / / or to adjust it and finally press OK to store the new adjustment.
Sound A d j u s t ment Effect Treble Bass Balance Dual Sound A u t o V o l u me Re s e t : Off
Sound A d j u s t ment Effect Treble Bass Balance Dual Sound A u t o V o l u me Re s e t , set t o select , : Off

Mono Off

Effect
Off (no effect). Natural (enhances clarity, detail and presence of sound by using BBE High Definition Sound system*). Dynamic (BBE High Definition Sound system* intensifies clarity and presence of sound for better intelligibility and musical realism). TS (TruSurround**) (for surround sound (for example, DVD software). It produces a virtual sound effect.)
* The BBE High Definition Sound system is manufactured by Sony
Corporation under license from BBE Sound, Inc. It is covered by U.S. Patent No. 4,638,258 and No. 4,482,866. The word BBE and BBE Symbol are trademarks of BBE sound. TruSurround and the symbol are trademarks of SRS Labs, Inc. Trusurround technology is incorporated under license from SRS Labs, Inc. Press Press Press Press Press Press / / / / / / to decrease higher-pitched sounds. to increase higher-pitched sounds. to decrease lower-pitched sounds. to increase lower-pitched sounds. to emphasise the left speaker. to emphasise the right speaker.

Treble

Balance Dual Sound
Mono/Stereo For a stereo broadcast, select Stereo or Mono. Mono/A/B For a bilingual broadcast, select A for sound channel 1, B for sound channel 2 or Mono for mono channel if available. On/Off Volume level of the channels will stay the same, independent of the broadcast signal (e.g. in the case of advertisements). Cancel/OK Select OK to reset the sound to the factory preset.

Auto Volume

Screen Control
The Screen Control menu allows you to alter the screen adjustments.

S c r e e n Con t r o l Aut o Format S c r e e n Format S c r e e n Zoom Screen Size S c r e e n Sh i f t Adjust Pi x e l Re s e t : : : On Wide St a n d a r d
S c r e e n Con t r o l Aut o Format S c r e e n Format S c r e e n Zoom Screen Size S c r e e n Sh i f t Adjust Pi x e l Re s e t , set t o select , : : : On Wide St a n d a r d

Auto Format

The Auto Format option allows you to automatically change the aspect ratio of the screen. To do this: to select After selecting the option, press. Then press or On (if you wish the TV set to automatically switch the screen format according to the broadcast signal) or Off (if you wish to keep your preference) and finally press OK to store.
Even if you have selected On or Off in the Auto Format option, you can always modify the format of the screen by pressing repeatedly on the remote control. Screen Format The Screen Format option allows you to modify the format of the screen. To do this: After selecting the option, press. Then press or the desired screen format and finally press OK to store. Smart: Imitation of wide screen effect for 4:3 broadcast. 4:3: Conventional 4:3 picture size, full picture information. Compromise between 4:3 and 16:9 picture size.

14:9 Smart

to select
Zoom: Wide screen format for letterbox movies.
Wide: For 16:9 broadcast.
If parts of the top and bottom of the screen are cut off, press the position of the image on the screen (e.g. to read subtitles).

to adjust

Screen Zoom
The Screen Zoom option allows you to enlarge the picture with the centre position fixed (only when Screen Format is set to Wide). To do this: After selecting the option, press. Then press or to select from Standard (normal size), 2 (doubled), 3 (tripled), or 4 (quadrupled) and finally press OK to store.
Screen Zoom can be adjusted only when Screen Format is set to Wide. Screen Size The Screen Size option allows you to adjust the size of the picture for each Screen Format. To do this: 1 After selecting the option, press. 2 Press / / or to adjust each option, then press OK to store. Press Press Press Press to enlarge the Screen Size vertically. to shrink the Screen Size vertically. to shrink the Screen Size horizontally. to enlarge the Screen Size horizontally.
Screen Size cannot be adjusted horizontally when Screen Format is set to Smart. Screen Shift The Screen Shift option allows you to adjust the position of the picture for each Screen Format. To do this: 1 After selecting the option, press. 2 Press / / or to adjust each option, then press OK to store. Press Press Press Press to move the screen up. to move the screen down. to move the screen to the left. to move the screen to the right.
Screen Shift cannot be adjusted horizontally when Screen Format is set to Smart.

Adjust Pixel

The Adjust Pixel option allows you to adjust the picture from an RGB piece of equipment. To do this: 1 After selecting the option, press. 2 Press or to select the following option. Auto Adjust: Select OK to automatically make the best picture for the input signal. Note that it may not be adjusted perfectly depending on the input signal condition or picture pattern. In this case, perform Auto Adjust again. Dot phase: Adjust between 00-63 when part of a displayed text or image is not clear. Total H Pixel (Total Horizontal Pixel): Adjust when the whole picture is not clear as a whole. Reset: Reset to the factory settings.

Adjust Pixel is only available for the RGB input signal connected to 5 connector and the AV5 Inputoption is set to RGB in the Features menu. Reset Cancel / OK Select OK to reset Screen Zoom, Screen Size and Screen Shift options to the factory preset

Features

The Features menu allows you to alter various adjustments of this TVs features.
Features Po w e r S a v i n g T V Speakers S c r e e n Sa v e r AV 3 O u t p u t AV 3 I n p u t AV 4 I n p u t AV 5 I n p u t RGB M o d e : : : : : : St a n d a rd On Auto Video Video Component DTV to
Features Po w e r S a v i n g T V Speakers S c r e e n Sa v e r AV 3 O u t p u t AV 3 I n p u t AV 4 I n p u t AV 5 I n p u t RGB M o d e , set t o select , : : : : : : : St a n d a rd On Auto Video Video Component DTV ,

Power Saving

The Power Saving option allows you to reduce the power consumption of this TV. To do this: After selecting the option, press. Then press Reduce and finally press OK to store. or to select
If you turn off the TV whilst the Power Saving mode is on, the mode stays on next time you turn on the TV. If you select the Movie, Personal1 or Personal2 mode on the Picture Adjustment menu (page 13), you can adjust the picture option even if the Power Saving mode is set to on. Note that power consumption will still increase if you increase the Contrast or Brightness. TV Speakers The TV Speakers option allows you to control the sound output of the TVs speakers when using your audio system speakers. To do this:. Then press or to select After selecting the option, press Off and finally press OK to store. Sound of the TV is not output through the TVs speakers. Screen Saver The Screen Saver option allows you to reduce image retention. To do this:. 1 After selecting the option, press Move the picture position to reduce image retention. Orbit: Select On to move the position. If you select On, set Orbit Range and Orbit Cycle. Orbit Range: Select the moving range from Large, Mid (Middle), and Small. Orbit Cycle: Select the moving time from 10sec, 30sec, 1min, and 5min. 2 Press OK to store.

AV3 Output

The AV3 Output option allows you to select the source to be output from the Scart connector 3/ S. You can record from this Scart any signal coming from the TV or from external equipment connected to the other Scart connectors. If your VCR supports SmartLink, this procedure is not necessary. To do this: After selecting the option, press. Then press or to select the desired output signal: Auto, TV, AV1, AV2, or AV4. If you select Auto, the output signal will always be the same one that is displayed on the screen. If you have connected a decoder to the Scart 3/ S or to a VCR connected to this Scart, please remember to change back the AV3 Output to Auto for correct unscrambling. When AV3 Output is set to Auto, the signal input through the AV5 input and the RGB signal are not output from the Scart connector 3/ S.

AV3 Input/ AV4 Input/ AV5 Input
The AV3 Input,AV4 Input, and AV5 Input options allow you to select which jack the TV receives the input signal from; Video or S Video for AV3 Input and AV4 Input, and Component or RGB for AV5 input. To do this:. Then press After selecting the option, press the desired jack and finally press OK to store. or to select

RGB Mode

Select the RGB Mode option if equipment which outputs RGB signal is connected to the Y/G, PB/CB/B, PR/CR/R jacks of the 5. To do this: After selecting the option, press. Then press or to select the connected equipment: DTV for a digital tuner with RGB signal, or Others for other RGB equipment. DTV is the digital broadcast format standardised in the United States, and there are several signal formats, such as 480i, 575i, 480p, 575p, 720p, or 1080i (depending on the country).

Set Up

The Set Up menu allows you to alter various options of this TV.
S e t Up L a n g u a g e / Coun t r y Auto Tuning Programme So r t i n g Programme L a b e l s AV P r e s e t Manual Programme P r e s e t

t o select ,

Language/ Country
The Language/Country option allows you to select the language that the menus are displayed in. It also allows you to select the country in which you wish to operate the TV set. To do this: and then proceed in the same After selecting the option, press way as in the steps 2 and 3 of the section Switching On the TV and Automatically Tuning on page 11.

Auto Tuning

The Auto Tuning option allows you to automatically search and store all available TV channels. To do this: After selecting the option, press and then proceed in the same way as in the steps 4 and 5 of the section Switching On the TV and Automatically Tuning on page 11.

Programme Sorting

The Programme Sorting option allows you to change the order in which the channels (TV Broadcast) appear on the screen. To do this: After selecting the option, press and then proceed in the same way as in the step 6 b) of the section Switching On the TV and Automatically Tuning on page 12.

Programme Labels

The Programme Labels option allows you to name a channel using up to five characters (letter or numbers). To do this: , then press or to 1 After selecting the option, press select the programme number with the channel you wish to name. 2 Press. Press / / / to select the letter, then press OK. Finally press / / or to select the word End on the screen and press OK to store. To correct the letter, select on the screen to go back and press OK. For a blank, select on the screen and press OK.

Press the

button on the remote control to return to the normal TV picture.
For Mono Equipment Connect the phono plug to the L/G/S/I socket and select 4 or S 4 input signal using the instructions above. Finally, refer to the Sound Adjustment section of this manual and select Dual Sound A on the sound menu screen.
Remote Control Configuration for VCR/DVD
This remote control is set by default to operate basic functions of this Sony TV, Sony DVD and most Sony VCRs when batteries are initially installed. To control other VCRs and DVDs of other major brands and certain Sony VCR models, please complete the following steps: Before you start, look up the 3 digit code for your brand of DVD or VCR from the list below. On those brands that have more than one code, enter the first code number. Sony will endeavour to update the software according to market changes. Therefore, please refer to code table included with the remote control for latest code set.
Press the Media Selector button on the remote control repeatedly until the required VCR or DVD green light is lit. If Media Selector is in the TV position, code numbers will not be stored.
Before the green light goes out, press and hold the yellow button for approximately 6 seconds until the green light starts flashing. Whilst the green light is flashing, enter all three digits of the code for your brand using the number buttons on the remote control. If your selected code is entered correctly, all three green lights will be lit momentarily.
Turn on your VCR or DVD and check that the main functions work. If your device is not working or some of the functions do not work please check you entered the correct code set or try the next code listed against the brand. Your brand codes may be lost if weak batteries are not replaced within a few minutes. To reset your DVD or VCR code number please repeat the above steps. A small label is attached inside the battery door to allow you to record your brand codes. Not all brands are covered and not all models of every brand may be covered. DVD Brand List Brand Code
SONY AIWA DENON GRUNDIG HITACHI JVC KENWOOD LG LOEWE MATSUI ONKYO PANASONIC PHILIPS PIONEER SAMSUNG SANYO SHARP THOMSON TOSHIBA YAMAHA

MENU TV VCR

VCR Brand List Brand Code
SONY (VHS) SONY (BETA) SONY (DV) AIWA AKAI DAEWOO GRUNDIG HITACHI JVC LG LOEWE MATSUI ORION PANASONIC PHILIPS SAMSUNG SANYO SHARP THOMSON TOSHIBA 301, 302, 303, 308, 309 303, 307, 310 304, 305, 306 325, 331, 351 326, 329, 330 342, 343 358, 355, 360, 361, 320, 351 327, 333, 334 314, 315, 322, 344, 352, 353, 354, 348, 349 332, 338 358, 355, 360, 361, 320, 351 356, 321, 323 311, 312, 313, 316, 317, 318, 358, 359 339, 340, 341, 345 335, 319, 350 337
018, 027, 020, 002 009, 028, 023, 024, 016, 003 025, 026, 015, 004 006, 015, 014 009, 028, 023, 024, 016, 003 013, 018, 027, 020, 002 009, 028, 023, 024, 016, 011, 019, 003 018, 027, 020, 002

Specifications

TV system: Depending on your country selection: B/G/H, D/K, L, I Colour system: PAL, SECAM NTSC 3.58, 4.43 (only Video In) Channel Coverage: VHF: E2-E12 UHF: E21-E69 CATV: S1-S20 HYPER: S21-S41 D/K: R1-R12, R21-R69 L: F2-F10, B-Q, F21-F69 I: UHF B21-B69 B/G (AUS):VHF: 0-12, 5A, 9A UHF: 20-69 CATV: S01-S03, S1-S44 B/G (NZ): VHF: 1-11 UHF: 21-69 CATV: S01-S03, S1-S41 Screen size (measured diagonally): KE-32TS2E: 32 inches approx. 82 cm. measured diagonally KE-42TS2E: 42 inches approx. 107 cm. measured diagonally Panel System: Plasma Display panel Display resolution: KE-32TS2E: 852 dots (horizontal) x 1024 lines (vertical) KE-42TS2E: 1024 dots (horizontal) x 1024 lines (vertical) Rear Terminals:
video input (phono jack): 1 Vp-p, 75-ohms unbalanced, sync negative
audio input (phono jacks): 500 m Vrms (100% modulation), Impedance: 47 kilo ohms
Y: 1 Vp-p, 75 ohms, 0.3V negative sync PB: 0.7 Vp-p, 75 ohms PR: 0.7 Vp-p, 75 ohms or G: 0.7 Vp-p, 75 ohms, Sync on Green B: 0.7 Vp-p, 75 ohms, Sync on Green R: 0.7 Vp-p, 75 ohms, Sync on Green or G: 0.7 Vp-p, 75 ohms, non Sync on Green B: 0.7 Vp-p, 75 ohms, non Sync on Green R: 0.7 Vp-p, 75 ohms, non Sync on Green HD:1-5 Vp-p VD: 1-5 Vp-p
audio input (phono jacks) 500 m Vrms (100% modulation), Impedance: 47 kilo ohms

5 SUB WOOFER: phono jack

CTRL S: minijacks Front Terminals: i headphones jack

Audio noise.

The TV fan noise becomes bigger.
Cannot operate the menu. Strange sound. The TV cabinet creaks.
The TV whirs. The TV ticks. The TV buzzes.
Remote control does not function.
Check that the Media Selector on the remote control is set according to the device you are using (VCR, TV or DVD). If the remote control does not operate the VCR or DVD even when the Media Selector has been set correctly, enter the necessary code set as explained in Remote Control Configuration for VCR/DVD on page 31. Replace the batteries. Contact your nearest Sony service centre.
The / (standby/sleep) indicator on the TV flashes.
If you continue to experience problems, have your TV serviced by qualified personnel. Never open the casing yourself.

http://www.sony.net/

Printed on 100% recycled paper.

Printed in Japan