Oxygen Presets
Your M-Audio Oxygen keyboard controller comes with 10 preset setups that allow you to use the keyboard with supported software right out of the box. Preset Application General MIDI GForce Oddity GForce ImpOSCar GForce Minimonsta:Melohman Way Out Ware TimewARP 2600 Wizoo Darbuka/Latigo Propellerhead Reason Mixer Propellerhead Reason Modules GS/XG NRPN Effect Controls Unassigned Controllers (Ableton Live)
With some of these applications it is necessary to set up your Oxygen keyboard within the software.
How to use the Oxygen with Ableton Live
Ableton Live does not have any default MIDI controller assignments but it is possible to make your own very quickly and easily using the softwares MIDI Learn function. It is best to use Preset 10 with Live, as it is programmed with a selection of unassigned MIDI controllers. 1) Select your Oxygen controller as the remote control device:
< Select Preferences from the Options menu (Windows) or from the Live menu (Mac). < Click on the MIDI/Sync tab. < In the Input column, set your Oxygen keyboard remote setting to ON.
2) Close the Preferences Window. 3) Click on the MIDI button in the top right hand corner. 4) Click on the parameter you want to control. 5) Move the desired control on your Oxygen. 6) When you have nished making all your assignments, click the MIDI button in the top right hand corner to exit Lives MIDI Map mode. If you nd that the transport controls have to be pressed twice, this can be changed for each control by following these steps: 1) Press a transport button. 2) Press Advanced then the Data 2 key on the keybed. 3) Type 127 and press ENTER on the keybed. Repeat this process for each transport control that you want to change. It is a good idea at this point to store your setup by pressing the Advanced button followed by Store on the keybed and then typing in a preset location from 1 to 10. Finally, press ENTER.
Preset 4: GForce Minimonsta:Melohman
In order to select your Oxygen keyboard as the MIDI input device for Minimonsta:
< Click on the Setup button just above Minimonstas keyboard. < Select your Oxygen keyboard from the menu that appears (displayed by name or as USB audio device on PC and CoreMIDI In interface on

Mac.).

Preset 5: Way Out Ware TimewARP 2600

To use this preset:

< Click on the TimewARP 2600 logo. < Select Load MIDI map. < Select the default map and click OK.
Preset 6: Wizoo Darbuka/Latigo
Wizoos Darbuka and Latigo are VST/AU/RTAS plug-ins that can only be used from within a host application. Make sure the MIDI input to the host is set to be your Oxygen keyboard. Set one of the tracks in the host to output to Darbuka or Latigo. Please consult the hosts documentation to see how this is done. To make the most of the Wizoo preset, the host should be set to transmit on all channels to Darbuka or Latigo.
Presets 7 and 8: Propellerhead Reason
Preset 7 will control the mixer in Reason. Preset 8 will control the Subtractor, Malstrom or the NN-19 in Reason. To set up your Oxygen keyboard to control the desired Reason module:
< Select the Edit menu (Windows) or Reason menu (Mac), followed by Preferences. < Select Advanced MIDI from the drop-down menu at the top of the screen. < Select your Oxygen keyboard as the Bus A device. Close the Preferences dialog.
In the MIDI IN device section at the top of the Reason rack, select the desired module in the Channel 1 box. Attention: Reason 3 includes presets for control surfaces and keyboards and lists Oxygen 8 (older model) and Oxygen 8 (newer model) as two of the available options. These presets are intended for the original Midiman Oxygen 8 and not for the M-Audio Oxygen 8 v2. The controller mapping may differ from your expectation when using one of these presets with a new M-Audio Oxygen 8 v2.
Preset 10: Undened MIDI controllers
This preset loads MIDI controller messages that are undened in the GM specication. This means that there is a reduced risk of altering a useful control by accident with this preset selected. Many applications do not have their parameters set up with default MIDI controllers. Most of these applications allow you to set up the controllers yourself. You should consult the documentation for your application to see how this is done. For applications that can learn MIDI controllers for their parameters, you should select this preset.