JetFlash

Users Manual

( Version 1.0 )

Table of Contents
INTRODUCTION....1 PACKAGE CONTENTS....1 FEATURES.....1 SYSTEM REQUIREMENTS....1 DRIVER INSTALLATION....2 DRIVER INSTALLATION FOR WINDOWS 98SE...2 DRIVER INSTALLATION FOR WINDOWS ME, 2000, AND XP...2 DRIVER INSTALLATION FOR MAC OS 9.0 OR LATER...2 DRIVER INSTALLATION FOR LINUX KERNEL 2.4.2 OR LATER...2 PARTITION & SECURITY FUNCTION....3 PARTITION TYPES....3 ACCESS DATA IN THE SECURITY AREA....5 LOG OUT OF THE SECURITY AREA....6 CHANGE PASSWORD....6 IF YOU FORGET THE PASSWORD....8 PC-LOCK FUNCTION....8 PC-LOCK FUNCTION FOR WINDOWS 98SE, ME, 2000, AND XP..8 LOCK YOUR COMPUTER....9 UNLOCK YOUR COMPUTER....9 BOOT-UP FUNCTION.....9 SYSTEM REQUIREMENTS FOR THE BOOT-UP FUNCTION...10 BOOT-UP FUNCTION FOR WINDOWS 98SE AND ME..10 BOOT-UP FUNCTION FOR WINDOWS XP... 11 REMOVE MFORMAT....14 SAFELY REMOVE YOUR JETFLASH....14 REMOVE JETFLASH IN WINDOWS 98SE...14 REMOVE JETFLASH IN WINDOWS ME, 2000, AND XP...14 REMOVE JETFLASH IN MAC OS....14 REMOVE JETFLASH IN LINUX....14 TROUBLESHOOTING....15

Introduction

Thank you very much for purchasing Transcends JetFlash. This small device is designed to expedite the exchange of huge amounts of data between any desktop or notebook computer with a USB port. With a higher storage capacity and a much faster data transfer rates than other typical portable storage media, JetFlash can easily replace floppy diskettes and hard disks. In addition, its mobility, superior data retention ability, and impressive appearance will provide you with a brand-new data storage experience.

Package Contents

The JetFlash package includes the following items:
JetFlash Neck Strap Driver CD Quick Installation Guide

Features

Fully compatible with USB 2.0 Easy Plug and Play installation PC-Lock Function: Makes JetFlash a key to your computer Boot-Up Function: Makes JetFlash a bootable device Partition & Security Function: Create a private partition with password protection Driverless (Only Windows 98SE needs the enclosed driver) Powered via the USB port. No external power or battery needed LED indicates the usage status of the JetFlash

System Requirements

Hardware: Desktop or notebook computer with USB port Operating System: Windows 98SE, Windows Me, Windows 2000 or Windows XP Mac OS 9.0 or later, Linux Kernel 2.4.2 or later

Driver Installation

Driver Installation for Windows 98SE
1. Put the Driver CD into the CD-ROM drive (Auto-Run supported). Select the Win98 Driver button.
WARNING! Please ensure you install the driver before plugging in your JetFlash.
2. Follow the on-screen instructions to complete the driver installation. 3. Plug your JetFlash into an available USB port. A new Removable Disk drive with a newly assigned drive letter will appear in the My Computer window.
Driver Installation for Windows Me, 2000, and XP
No driver is required. These Windows operating systems have built-in drivers to support JetFlash. Simply plug JetFlash into an available USB port, and Windows will install the files needed to use your device. A new Removable Disk drive with a newly assigned drive letter will appear in the My Computer window.
Driver Installation for Mac OS 9.0 or Later
No driver is required. Just plug JetFlash into an available USB port and your computer will automatically detect it. A new Disk icon will appear on the Desktop.
Driver Installation for Linux Kernel 2.4.2 or Later
No driver is required. Just plug JetFlash into the USB port and mount it. Example: 1. 2. First create a directory for JetFlash mkdir /mnt/jetflash Mount JetFlash mount a t msdos /dev/sda1 /mnt/jetflash

Partition & Security Function

Partition Types

You can partition JetFlash into two partition types. The two types are:

Type 1: Public Area Only

This is the default partition type for JetFlash. It allows the entire volume of JetFlash memory to be accessed by anyone. No secure data area is established.

Public Area

Type 2: Public and Security Area
JetFlash is partitioned into a single Logical Unit Number (LUN) identified device, which contains a Public Area and a Security Area. Secure data can be established in the Security Area, which is protected by a password. Access to data in the Public Area is unrestricted.

Log Out / Log In

Security Area
1. Put the Driver CD into the CD-ROM drive (Auto-Run supported). Plug your JetFlash into an available USB port of your computer and select the mFormat button.
2. Select the Partition button in the mFormat window.
3. The following window will appear. Select Yes to continue or No to stop.
4. Select the partition type you need. a. To partition your JetFlash to the default type, i.e.,Public Area Only. Choose the Public Area Only, and then select OK. b. To partition your JetFlash toPublic and Private Area, select Public and Private Area and enter the memory sizes to be apportioned to the Private Partition Area.
The minimum size apportioned to the Private Partition Area is 3MB, and the maximum cannot exceed or equal the Total Storage Size.
Key in a New Password. (Maximum size for a password is 8 characters.)
iii. Key in a Password Hint, as a reminder in case you forget your password.

iv. Select OK.

5. The following window will appear to warn you. Select OK to continue or Cancel to stop.
6. Once the partition is finished, the following window will appear. Select OK.
Access Data in the Security Area
1. Plug in your JetFlash and double-click the mFormat.EXE in JetFlash. The icon appear in the system tray and the following mFormat window will appear. will
After the partition function is finished, the mFormat.EXE file will be copied to the JetFlash. Please do not delete it. You can execute the mFormat function without the Driver CD by running the mFormat.EXE on any computer. 2. Select the Login/out button in the mFormat window.
3. The following window will appear. Enter the correct password and select OK.

If a Password Hint was set up during the partition procedure, you can select the Hint button to display your Password Hint to help you to remember the password. 4. The Removable Disk window will now appear and the Security Area is ready for use.
Log Out of the Security Area
1. Make sure that all files are closed and that no data is being transferred to or from your JetFlash. 2. Click the Login/out button in the mFormat window. Once you have successfully completed the Log Out procedure for the Security Area of your JetFlash, only data in the Public Area will be accessible.

Change Password

1. Select the Login/out button in the mFormat window.
2. The following window will appear. Select the Manage Password button.
3. Input the Old Password, and New Password and the Confirm New Password in each field. (Maximum size for a password is 8 characters) You can also input a Password Hint to set up a reminder for your new password. Select OK.
4. The following window appears. Select OK to close this window.
If You Forget the Password
If you forget your password, you can use the password hint to remember it. If you cannot recall the password using the password hint, then all you can do is run the Partition function again to repartition your JetFlash. Unfortunately, all your Private area data will be lost during this procedure. You will have the chance to make a backup copy of your data in the Public area but all data in the Private area is permanently lost.

PC-Lock Function

Once the PC-Lock function is enabled, you can use your JetFlash as a key to lock your computer, protecting it from being used by other users. The PC-Lock function is not supported in Mac or Linux Operating Systems. To use the PC-Lock function, you must login into the Windows OS with Administrator rights.
PC-Lock Function for Windows 98SE, Me, 2000, and XP
1. Select the PC-Lock button in the mFormat window.
2. The following window will appear.
3. In this window you can select the Protect Time you want, change the PC-Lock hint and the Font.
4. Select the OK button to enable the PC-Lock function. If you want to lock your computer after shutdown, you can select OK & ShutDown. You can remove your JetFlash when the computer is turned off. 5. The following message will appear to show that the PC-Lock function is enabled.

Lock Your Computer

After the PC-Lock function is enabled, your computer will be locked whenever you remove your JetFlash. If your computer is locked, the screen will display the locked status as shown below.

Unlock Your Computer

To unlock your computer, you must re-insert your JetFlash. The locked status on the screen will disappear and you are now free to use your computer. The computers locked status will be relinquished automatically after the lock time has expired.

Boot-Up Function

For systems that use Windows 98SE, Me, or XP, JetFlash can be configured to serve as an MS-DOS Boot Disk. Upon completion of this procedure, JetFlash can be used to boot-up your computer, allowing you to run MS-DOS programs. This does not make JetFlash a Rescue Disk for Windows, nor does it put Windows Startup files onto your JetFlash. After booting with JetFlash, if you wish to enter Windows, you must start Windows from your hard drive or a previously created Rescue Disk. The Boot-Up function is not supported in Windows 2000, Mac, or Linux Operating Systems. To use the Boot-Up function, you must login into the Windows OS with Administrator rights. If choosing to use the Boot-Up function, please be aware that there is a maximum capacity size
of 500MB (or less) apportioned to the Boot-Up disk sector; this applies to both the USB-ZIP and USB-HDD formats.
System Requirements for the Boot-Up Function
A desktop or notebook computer that supports USB-ZIP or USB-HDD as the First Boot Device in BIOS Windows 98SE, Me, or XP located on the C: drive Any anti-virus programs must be turned off
Boot-Up Function for Windows 98SE and Me
1. Select the Boot-Up button in the mFormat window.
2. The following window will appear. Select Yes to continue or No to stop
3. The following window will appear, choose the boot-up type you need (USB HDD or USB ZIP, whichever has been set as the First Boot Device in BIOS) and select Create Boot Disk.
USB-HDD boot-up type is not supported in Windows Me.
4. The following message will appear. Select OK to continue or Cancel to exit.
5. The following window will appear. JetFlash is now ready for use as an MS-DOS Boot Disk. Select OK to close the window.
When you have completed this process, your JetFlash will contain the files needed for the Boot-up function. Do not remove any of these files or else the Boot-Up function will fail. If USB HDD was selected, the C:\> prompt will appear after using the JetFlash to boot up. If USB ZIP was selected, the screen will show the A:\> prompt.
Boot-Up Function for Windows XP
1. Insert a new floppy disk into the Floppy Disk Drive (A:). Go to the My Computer window and right click on the Floppy DiskA: icon. Select Format from the pull-down menu.

2. Select Create an MS-DOS Startup Disk then select Start.

3. Select OK.

4. Select OK to complete the format.
5. Select the Boot-Up button in the mFormat window.
6. The following window will appear. Select Yes to continue or No to stop.
7. The Create Boot Disk window will appear. Select the Create Boot Disk button.
The USB-HDD boot-up type is not supported in Windows XP. 8. The following message will appear. Select OK to continue or Cancel to exit.
9. The following window will appear. JetFlash is now ready for use as an MS-DOS Boot Disk. Select OK to close the window.
When you have completed this process, JetFlash will contain the files needed to use the Boot-up function. Do not remove any of these files or else the Boot-Up function will fail.

Remove mFormat

When the mFormat.EXE file is executed, the icon remains in the system tray. If you do not
want to use this mFormat anymore, right click the icon and select exit to remove the mFormat.
Safely Remove Your JetFlash
Remove JetFlash in Windows 98SE
Unplug JetFlash from your system directly when data is not transferring.
Remove JetFlash in Windows Me, 2000, and XP
1. Select the icon on the system tray.
2. The Safely Remove Hardware pop-up menu will appear. Select to continue.
3. Follow the on-screen instructions to complete the procedure. 4. The Safe To Remove Hardware message balloon will appear. JetFlash is now ready to be unplugged.
Remove JetFlash in Mac OS
Drag and drop the Disk icon corresponding to your JetFlash into the trashcan. Then unplug your JetFlash from the USB port.

Remove JetFlash in Linux

Unmount the device from the Linux environment. Example: umount /mnt/jetflash
Before removing your JetFlash, please make sure the LED is on and Not flashing! If you remove the JetFlash while the LED is flashing, unpredictable damage may occur to the files and/or to your JetFlash due to a write cache fault.

Troubleshooting

If an error occurs, first check the points listed below before taking your JetFlash for repair. If you are unable to remedy a problem from the following hints, please consult your dealer or service center.

Driver CD cannot auto-run in Windows
Enter Device Manager in the Control Panel and enable the Auto-Insert function for the CD-ROM drive. Alternatively, you can execute the JetFlash.exe file in the driver CD manually.
Operating system cannot detect JetFlash
Check the following: 1. Is your JetFlash properly connected to the USB port? If not, unplug it and plug it in again. 2. Is your JetFlash connected to the Mac keyboard? If yes, unplug it and plug it into an available USB port on your Mac Desktop instead. 3. Is the USB port enabled? If not, refer the users manual of your computer (or motherboard) to enable it. 4. Is the necessary driver installed? If your computer is equipped with Windows 98SE, you must insert the Driver CD into the CD-ROM and refer to the Driver Installation for Windows 98SE section to complete the driver installation before using your JetFlash.
Boot-Up Function Error Messages
The initialization of the Boot-up Function or installation of the OS is probably incomplete. Please make sure that the path C:\WINDOWS\COMMAND\EBD exists in Windows 98SE, Me. If yes, return to step 1 to re-initialize the Boot-up function. If this fails, the Boot-up function is not supported by your computer operating system.
Cannot find the file that was just copied to the JetFlash
Re-copy the file and refer to the Safely Remove Your JetFlash section to remove the JetFlash after the copy process is completed.
File that was just deleted still appears
Re-delete the file and refer to the Safely Remove Your JetFlash section to remove the JetFlash after the delete process is completed.
mFormat (mFormat.EXE file) cannot be executed
You must be logged in to the computer you are using with Administrator rights in order to use the mFormat Utility. If you want to access the security functions of your JetFlash , you must execute the mFormat utility at least once.

JetFlash

Users Manual

(Version 1.0)

Table of Contents

Introduction.... 2

Package Contents.... 2 Features.... 2 System Requirements.... 2

Driver Installation... 3

Driver Installation for Windows 98SE... 3 Driver Installation for Windows Me, 2000 and XP... 3 Driver Installation for Mac OS 9.0, or Later... 3 Driver Installation for Linux Kernel 2.4.2, or Later... 3
Formatting the JetFlash... 4 Safely Remove the JetFlash from a Computer.. 5
Remove the JetFlash in Windows98SE.... 5 Remove the JetFlash in Windows Me, 2000 and XP.. 5 Remove the JetFlash in Mac OS, or Later and Linux Kernel 2.4.2, or Later. 5

JetFlash 150 Series... 6

Specifications.... 6 Ordering Information.... 6

JetFlash 120 Series... 7

Specifications.... 7 Ordering Information.... 7

JetFlash 110 Series... 8

Specifications.... 8 Ordering Information.... 8

JetFlash 2A Series... 9

Specifications.... 9 Ordering Information.... 9

Introduction

Congratulations on purchasing Transcends JetFlash. This tiny device allows you to exchange huge amounts of data and information between it and any desktop or notebook computer with a USB port. The JetFlash plugs directly into your desktop or notebook computer, has a large storage capacity and much faster data transfer rates, making it perfect for storing and transferring your files, folders, documents, photos and other personal digital content. In addition, the JetFlashs small convenient size, superior data retention and impressive appearance will provide you with a brand-new data storage experience.

Package Contents

The JetFlash package includes the following items: JetFlash Neck Strap Utility CD USB Extension Cable (JetFlash 2A only) Quick Instruction Guide

Features

Hi-Speed USB 2.0 compliant and USB 1.1 backwards compatible Easy Plug and Play installation Driverless (Only Windows 98SE needs the enclosed driver) Powered via the USB port. No external power or battery needed Additional bundled software (helps you manage your data) LED indicates the usage status of the JetFlash

System Requirements

Desktop or notebook computer with a USB port and one of following operating systems: Windows 98SE Windows Me Windows 2000 Windows XP Mac OS 9.0, or later Linux Kernel 2.4.2, or later

Driver Installation

Driver Installation for Windows 98SE
Please connect to the Transcend website using the link and download the required Drivers. http://www.transcendusa.com/Support/DLCenter/index.asp?Func1No=2&Func2No=28
Driver Installation for Windows Me, 2000 and XP
No drivers are required. These Windows operating systems have built-in drivers to support the JetFlash. Simply plug the JetFlash into an available USB port and Windows will install the files needed to use your device. A new Removable Disk drive with a newly assigned drive letter will appear in the My Computer window.
Driver Installation for Mac OS 9.0, or Later
No drivers are required. Just plug the JetFlash into an available USB port and your computer will automatically detect it.
Driver Installation for Linux Kernel 2.4.2, or Later
No drivers are required. Just plug the JetFlash into the USB port and mount it. Example: 1. First create a directory for the JetFlash mkdir /mnt/jetflash 2. Mount the JetFlash mount a t msdos /dev/sda1 /mnt/jetflash

Formatting the JetFlash

1. Plug the JetFlash into a USB port and right-click on the removable disk. 2. Select Format in the drop down menu to format the JetFlash. WARNING! Formatting the Disk will erase all of the data on your JetFlash 3. Click on the Start button to begin formatting the JetFlash and follow the on-screen instructions.
Safely Remove the JetFlash from a Computer
Remove the JetFlash in Windows98SE
Disconnect the JetFlash from your system directly when data is not transferring.
Remove the JetFlash in Windows Me, 2000 and XP

1. Select the icon on the system tray. 2. The Safely Remove Hardware pop-up menu will appear. Select it to continue.
3. A message box will appear stating: The USB Mass Storage Device device can now be safely removed from the system.
Remove the JetFlash in Mac OS, or Later and Linux Kernel 2.4.2, or Later
Drag and drop the Disk icon corresponding to your JetFlash into the trashcan. Then unplug your JetFlash from the USB port.

JetFlash 150 Series

Specifications
Size: Weight: Data Retention: Erase Cycles: Speed: Certificates: 59mm x 19mm x 10mm 10 g Up to 10 years

100,000 times

Read / Write12 / 8 MB/sec (Max.) CE, FCC, BSMI

Ordering Information

Transcend P/N TS256MJF150 TS512MJF150 TS1GJF150 TS2GJF150 Memory Size 256MB 512MB 1GB 2GB Color Green Blue Red Silver

JetFlash 120 Series

Size: Weight: Data Retention: Erase Cycles: Speed: Certificates: 75mm x 25mm x 11mm 15 g Up to 10 years
Read / Write: 10 / 8 MB/sec (Max.) CE, FCC, BSMI
Transcend P/N TS128MJF120 TS256MJF120 TS512MJF120 TS1GJF120 TS2GJF120 TS4GJF120 Memory Size 128MB 256MB 512MB 1GB 2GB 4GB Color Amber Orange Red Blue Light Blue Turquoise

JetFlash 110 Series

Size: Weight: Data Retention: Erase Cycles: Speed: Certificates: 64mm x 21mm x 10mm 11 g Up to 10 years
Read / Write: 12 / 8 MB/sec (Max. for 128MB 1GB) Read / Write: 18 / 14 MB/sec (Max. for 2GB only) CE, FCC, BSMI
Transcend P/N TS128MJF110 TS256MJF110 TS512MJF110 TS1GJF110 TS2GJF110 TS4GJF110 Memory Size 128MB 256MB 512MB 1GB 2GB 4GB Color Gold Green Blue Red Gray Amber

JetFlash 2A Series

Size: 75mm x 25mm x 11mm (Mini Size) 88mm x 33mm x 15mm (Normal Size) 15 g (Mini Size) 24 g (Normal Size) Up to 10 years
Weight: Data Retention: Erase Cycles: Speed: Certificates:
Read / Write: 10 / 8 MB/sec (Max. for 128MB 4GB) Read / Write: 21 / 11 MB/sec (Max. for 8GB only) CE, FCC, BSMI
Transcend P/N TS128MJF2A TS256MJF2A TS512MJF2A TS1GJF2A TS2GJF2A TS4GJF2A TS8GJF2A Memory Size 128MB 256MB 512MB 1GB 2GB 4GB 8GB Color Silver, Mini Size Silver, Mini Size Silver, Mini Size Silver, Mini Size Silver, Mini Size Silver, Mini Size Silver, Normal Size