PHONES (044) 360-7-130 (050) 336-0-130 (063) 788-0-130 (067) 233-0-130 (068) 282-0-130
Internet store of autogoods
ICQ 294-0-130 597-0-130 SKYPE km-130
CAR RECEIVERS Receivers Media receivers and stations Native receivers CD/DVD changers FM-modulators/USB adapters Flash memory Facia plates and adapters Antennas Accessories | CAR AUDIO Car audio speakers Amplifiers Subwoofers Processors Crossovers Headphones Accessories | TRIP COMPUTERS Universal computers Model computers Accessories | GPS NAVIGATORS Portable GPS Built-in GPS GPS modules GPS trackers Antennas for GPS navigators Accessories | VIDEO DVR TV sets and monitors Car TV tuners Cameras Videomodules Transcoders Car TV antennas Accessories | SECURITY SYSTEMS Car alarms Bike alarms Mechanical blockers Immobilizers Sensors Accessories | OPTIC AND LIGHT Xenon Bixenon Lamps LED Stroboscopes Optic and Headlights Washers Light, rain sensors Accessories | PARKTRONICS AND MIRRORS Rear parktronics Front parktronics Combined parktronics Rear-view mirrors Accessories | HEATING AND COOLING Seat heaters Mirrors heaters Screen-wipers heaters Engine heaters Auto-refrigerators Air conditioning units Accessories | TUNING Vibro-isolation Noise-isolation Tint films Accessories | ACCESSORIES Radar-detectors Handsfree, Bluetooth Windowlifters Compressors Beeps, loudspeakers Measuring instruments Cleaners Carsits Miscellaneous | MOUNTING Installation kits Upholstery Grilles Tubes Cable and wire Tools Miscellaneous | POWER Batteries Converters Start-charging equipment Capacitors Accessories | MARINE AUDIO AND ELECTRONICS Marine receivers Marine audio speakers Marine subwoofers Marine amplifiers Accessories | CAR CARE PRODUCTS Additives Washer fluid Care accessories Car polish Flavors Adhesives and sealants | LIQUID AND OIL Motor oil Transmission oil Brake fluid Antifreeze Technical lubricant
In store "130" you can find and buy almost all necessary goods for your auto in Kyiv and other cities, delivery by ground and postal services. Our experienced consultants will provide you with exhaustive information and help you to chose the very particular thing. We are waiting for you at the address

http://130.com.ua

FOR CAR USE ONLY/NUR FR AUTOMOBIL GEBRAUCH/POUR APPLICATION AUTOMOBILE/ PARA USO EN AUTOMVILES/SOLO PER LUTILIZZO IN AUTOMOBILE/ENDAST FR BILBRUK

Powered Subwoofer

SWE-1000
OWNER'S MANUAL Please read before using this equipment. BEDIENUNGSANLEITUNG Lesen Sie diese Bedienungsanleitung bitte vor Gebrauch des Gertes. MODE D'EMPLOI Veuillez lire avant dutiliser cet appareil. MANUAL DE OPERACIN Lalo antes de utilizar este equipo.
ISTRUZIONI PER LUSO Si prega di leggere prima di utilizzare il attrezzatura. ANVNDARHANDLEDNING Innan du anvnder utrustningen br du lsa igenom denna anvndarhandledning.
ALPINE ELECTRONICS MARKETING, INC. 1-1-8 Nishi Gotanda, Shinagawa-ku, Tokyo 141-0031, Japan Phone 03-5496-8231 ALPINE ELECTRONICS OF AMERICA, INC. 19145 Gramercy Place, Torrance, California 90501, U.S.A. Phone 1-800-ALPINE-1 (1-800-257-4631) ALPINE ELECTRONICS OF CANADA, INC. 777 Supertest Road, Toronto, Ontario M3J 2M9, Canada Phone 1-800-ALPINE-1 (1-800-257-4631) ALPINE ELECTRONICS OF AUSTRALIA PTY. LTD. 161-165 Princes Highway, Hallam Victoria 3803, Australia Phone 03-8787-1200 ALPINE ELECTRONICS GmbH Frankfurter Ring 117, 80807 Mnchen, Germany Phone 089-640 ALPINE ELECTRONICS OF U.K. LTD. Alpine House Fletchamstead Highway, Coventry CV4 9TW, U.K. Phone 0870-763 ALPINE ELECTRONICS FRANCE S.A.R.L. (RCS PONTOISE B 280) 98, Rue de la Belle Etoile, Z.I. Paris Nord Il, B.P. 50016, 95945 Roissy Charles de Gaulle Cedex, France Phone 01-48638989 PERCETAKAN MEWAH PEK SDN. BHD. 39, JALAN PERUSAHAAN JELUTONG, 11600 PENANG, MALAYSIA Designed by ALPINE Japan Printed in Malaysia (Y) 68-04123Z97-A ALPINE ITALIA S.p.A. Viale C. Colombo 8, 20090 Trezzano Sul Naviglio (MI), Italy Phone 02-484781 ALPINE ELECTRONICS DE ESPAA, S.A. Portal de Gamarra 36, Pabelln, Vitoria (Alava)-APDO 133, Spain Phone 945-283588 ALPINE ELECTRONICS (BENELUX) GmbH Leuvensesteenweg 510-B6, 1930 Zaventem, Belgium Phone 02-725-13 15

Autogood products internet store http://130.com.ua
ALPINE SWE-1000 68-04123Z97-A (EN)

WARNING

This symbol means important instructions. Failure to heed them can result in serious injury or death. DO NOT DISASSEMBLE OR ALTER.
Doing so may result in an accident, fire or electric shock.
DO NOT INSTALL THE MONITOR NEAR THE PASSENGER SEAT AIR BAG.
If the unit is not installed correctly the air bag may not function correctly and when triggered the air bag may cause the monitor to spring upwards causing an accident and injuries.
DO NOT ALLOW CABLES TO BECOME ENTANGLED IN SURROUNDING OBJECTS.
Arrange wiring and cables in compliance with the manual to prevent obstructions when driving. Cables or wiring that obstruct or hang up on places such as the steering wheel, shift lever, brake pedals, etc. can be extremely hazardous.
DO NOT BLOCK VENTS OR RADIATOR PANELS.
Doing so may cause heat to build up inside and may result in fire.
KEEP SMALL OBJECTS SUCH AS BATTERIES OUT OF THE REACH OF CHILDREN.
Swallowing them may result in serious injury. If swallowed, consult a physician immediately.
KEEP THE VOLUME AT A LEVEL WHERE YOU CAN STILL HEAR OUTSIDE NOISES WHILE DRIVING.
Excessive volume levels that obscure sounds such as emergency vehicle sirens or road warning signals (train crossings, etc.) can be dangerous and may result in an accident. LISTENING AT LOUD VOLUME LEVELS IN A CAR MAY ALSO CAUSE HEARING DAMAGE.
USE THE CORRECT AMPERE RATING WHEN REPLACING FUSES.
Failure to do so may result in fire or electric shock.
USE ONLY IN CARS WITH A 12 VOLT NEGATIVE GROUND.
(Check with your dealer if you are not sure.) Failure to do so may result in fire, etc.
USE THIS PRODUCT FOR MOBILE 12V APPLICATIONS.
Use for other than its designed application may result in fire, electric shock or other injury.
BEFORE WIRING, DISCONNECT THE CABLE FROM THE NEGATIVE BATTERY TERMINAL.
Failure to do so may result in electric shock or injury due to electrical shorts.
MAKE THE CORRECT CONNECTIONS.
Failure to make the proper connections may result in fire or product damage.
DO NOT SPLICE INTO ELECTRICAL CABLES.
Never cut away cable insulation to supply power to other equipment. Doing so will exceed the current carrying capacity of the wire and result in fire or electric shock.
DO NOT INSTALL IN LOCATIONS WHICH MIGHT HINDER VEHICLE OPERATION, SUCH AS THE STEERING WHEEL OR SHIFT LEVER.
Doing so may obstruct forward vision or hamper movement etc. and results in serious accident.
DO NOT DAMAGE PIPE OR WIRING WHEN DRILLING HOLES.
When drilling holes in the chassis for installation, take precautions so as not to contact, damage or obstruct pipes, fuel lines, tanks or electrical wiring. Failure to take such precautions may result in fire.

DO NOT USE BOLTS OR NUTS IN THE BRAKE OR STEERING SYSTEMS TO MAKE GROUND CONNECTIONS.
Bolts or nuts used for the brake or steering systems (or any other safety-related system), or tanks should NEVER be used for installations or ground connections. Using such parts could disable control of the vehicle and cause fire etc.
DO NOT OPERATE ANY FUNCTION THAT TAKES YOUR ATTENTION AWAY FROM SAFELY DRIVING YOUR VEHICLE.
Any function that requires your prolonged attention should only be performed after coming to a complete stop. Always stop the vehicle in a safe location before performing these functions. Failure to do so may result in an accident.

CAUTION

This symbol means important instructions. Failure to heed them can result in injury or material property damage. HALT USE IMMEDIATELY IF A PROBLEM APPEARS.
Failure to do so may cause personal injury or damage to the product. Return it to your authorized Alpine dealer or the nearest Alpine Service Centre for repairing.
USE SPECIFIED ACCESSORY PARTS AND INSTALL THEM SECURELY.
Be sure to use only the specified accessory parts. Use of other than designated parts may damage this unit internally or may not securely install the unit in place. This may cause parts to become loose resulting in hazards or product failure.
DO NOT INSTALL IN LOCATIONS WITH HIGH MOISTURE OR DUST.
Avoid installing the unit in locations with high incidence of moisture or dust. Moisture or dust that penetrates into this unit may result in product failure.
HAVE THE WIRING AND INSTALLATION DONE BY EXPERTS.
The wiring and installation of this unit requires special technical skill and experience. To ensure safety, always contact the dealer where you purchased this product to have the work done.
ARRANGE THE WIRING SO IT IS NOT CRIMPED OR PINCHED BY A SHARP METAL EDGE.
Route the cables and wiring away from moving parts (like the seat rails) or sharp or pointed edges. This will prevent crimping and damage to the wiring. If wiring passes through a hole in metal, use a rubber grommet to prevent the wires insulation from being cut by the metal edge of the hole.

CAUTION IN USE

When installing, be sure to use the supplied brackets.
For safety, accessories are supplied to install the product. When installing, be sure to use the supplied brackets to securely fix the product. For further information, refer to "MOUNTING" (page 6).
Do not place magnetic strips, such as credit cards or store cards near the product.

The product contains a strong magnet. Do not place your wallet or bags near it. Data contained on the magnetic strips of credit/store cards may be damaged or lost.
Do not place drinks/water close to the product.
Spilling any drink or water on the product may result in malfunction.
Especially during the summer, the temperature inside a vehicle may become excessive. If this happens, use the product after decreasing the temperature to a normal level in the vehicle.
For the protection, the product is designed to not sound automatically when you use it in the high temperature. If no sound is output, wait until the temperature decreases to a normal level in the vehicle, and then turn the head unit off and on again. (if there is no remote turn-on lead on the head unit and the product is not connected to the head unit, turn the ignition key off and on again.) Use this product even when it happens. This is not a malfunction.
Do not lift the product by its opening.
Lifting the product opening may result in malfunction.
Do not insert any objects in the product.
Inserting objects in the product may result in malfunction.
Be sure to use the supplied power extension cable (with 10 A fuse), and connect the cable directly to the positive (+) post of the battery.
Be sure to use the supplied power extension cable, and connect the cable directly to the positive (+) post of the battery. If a power cable is connected by dividing an existing power cable of the vehicle, low voltage may result in poor product function; this power cable may result in heat, smoke or fire.
Securely connect a ground lead from the product to a bare metal part of a vehicle chassis.
Securely fasten using the screw. If connection is not securely made, the product may not function normally. For a good chassis ground connection, remove any paint on the metal with a file.
DO NOT EXCEED THE INPUT LEVEL SPECIFIED FOR THIS PRODUCT.
If sound distortion or popping noise is output from the speaker, the input level to the speaker is excessively increased. If the input level to the speaker remains excessive, its performance may result in deterioration or cause damage to the speaker.
DAMAGE CAUSED BY EXCESSIVE INPUT LEVEL IS NOT COVERED BY THE WARRANTY.
If gain is adjusted to eliminate distortion at the output, maximum available, volume level may be insufficient. In this case, place the product closer to the listener. Theoretically, halving the distance will result in 4 times the volume.
DO NOT USE A MOBILE PHONE NEAR THE PRODUCT.
Use of a mobile phone may cause malfunction and noise.

SPECIFICATIONS

L MAX POWER OUTPUT.... 150W L CROSSOVER.... 50~125Hz (-12dB / oct) L PHASE..... 0, 180 L INPUT IMPEDANCE.... 22k (Line Input) 5.9k (Speaker Input) L POWER REQUIREMENT... DC 14.4V (11~16V allowable) L EARTH TYPE.... Negative Earth L DIMENSIONS.. 250mm (9-13/16") 272mm (10-7/10") 114mm (4-1/2") L WEIGHT.... 3.5kg

IN CASE OF DIFFICULTY

If you have a problem with the product, check the following items before taking for repair.
SYMPTOM Unit is not functional (for example, fuse is blown)
CAUSE Head unit is not turned on. Ground cable is not properly connected. Battery power cable is not properly connected.
Power can be turned on but no sound Fuse is blown. is output.
Remote turn-on lead is not properly connected.
RCA cable is not properly connected.

SOLUTION

Turn the head unit on. Check the ground cable is properly connected. Check the battery power cable is properly connected. Replace the fuse with its specified rating. Check the remote turn-on lead is properly connected. Connect RCA cable to the terminal properly.
Speaker input lead is not properly Check the speaker input lead is connected. properly connected. The gain is not at the correct level Adjust the gain setting to an for the system. appropriate level for the system.

ACCESSORY LIST

Parts Power Supply Connector Battery extension lead (5.5m) (216-1/2") Speaker to RCA Converter Cable (6m) (236-1/5") RCA Cable (0.5m) (19-3/5") Remote Control Cable (6m) (236-1/5") Velcro Fastener Adhesive Pad Qty. set 1 Parts Bracket (large) Bracket (small) Truss Screw (M5 8mm) Flat Screw (M5 10mm) Self-tapping Screw (M5 18mm) Owners Manual Qty. set

1. MOUNTING

Make sure there is sufficient length of the various cables for your desired subwoofer location. Certain products are incompatible with this subwoofer. Read the Owner's Manual of the product to be used with the subwoofer, alongside this manual during mount.
Park the car in a safe, level place. Apply the handbrake and remove the key.
Determine where to install the subwoofer, and check that there is sufficient cable length.

Mount the subwoofer.

a Recommended Mounting Location
You can enjoy extended bass by mounting the subwoofer in the rear baggage compartment of the vehicle.
a How to mount the Remote Control
Attach the soft side of fastener to the base of the remote control. Attach the rough side of fastener to the mounting location (console box, etc.).
Velcro Fastener (supplied) Console box, etc.

Remote Control Protective Paper

a Mounting example

Vertical Mounting
1 Determine the mounting location in the vehicle. 2 Determine mounting method. Select how to mount the subwoofer, vertical mounting (A), or horizontal mounting (B). 3 Attach the supplied adhesive pad to the centre of the base. (Vertical Mounting A*) 4 Attach the supplied bracket to the subwoofer using the supplied screws. 5 Mark the screw mounting location in the vehicle. 6 Drill a hole (3.5mm) (1/8") for the screw. 7 Install the subwoofer in the vehicle using the supplied screw. Self-tapping Screw (supplied)
<Vertical Mounting A>
Bracket (large) (supplied)
* Peel off the protective paper. Truss Screw (supplied)

Adhesive Pad (supplied)

<Vertical Mounting B>

Truss Screw (supplied)

Self-tapping Screw (supplied)

Horizontal Mounting

Bracket (small) (supplied)

Flat Screw (supplied)

* Mounting procedure the same as for vertical mounting.

2. CONNECTION

Disconnect the cable from the negative terminal of the car battery. Connect
a CONNECTIONS FOR RCA INPUT

White RCA Cable

RCA Cable (sold separately)

Remote turn-on lead

Ground lead

Blue/White 12V

Pre-out

Head Unit

Remote turn-on lead Connect to the ACC line if the head unit has no remote turn-on lead.
Connect the ground lead securely and safely to a metal spot of the chassis.
FUSE (10A) Yellow Yellow Battery extension lead Be sure to use the supplied extension cable for connection to the positive (+) post of the battery. DO NOT connect this lead to the head unit. DO NOT modify this cable. It may cause malfunction and damage to the product.
Type of Lead Remote turn-on lead
Additional Information Connect to the remote turn-on lead of the head unit. If your head unit does not have a remote turn-on lead, connect the ACC power lead to the unit. (Power is supplied to this lead when the ignition key is set to the ACC position.) Connect securely to a bare metal spot of the chassis. Connect directly to the positive (+) post of the battery.
Ground lead Battery extension lead
a CONNECTIONS FOR SPEAKER LEVEL INPUT

Head Unit Battery extension lead Yellow FUSE (10A) 12V Yellow
If your head unit does not have a remote turnon lead, connect the ACC power lead to the unit. (Power is supplied to this lead when the ignition key is set to the ACC position.) Ground lead Black Blue/White

Left speaker Output

Connect to either the front or rear speaker output leads. Note: Subwoofer output will be affected by the fader settings of the head unit. White

Right speaker Output

Be sure to use the supplied extension cable for connection to the positive (+) post of the battery. DO NOT connect this lead to the head unit. DO NOT modify this cable. It may cause malfunction and damage to the product.
Speaker to RCA Converter Cable White White Red Red

RCA Cable Red

Speaker to RCA Converter Cable

Green Left Speaker

Green/Black

Additional Information

Violet Right Speaker
Connect to the remote turn-on lead of the head unit. If your head unit does not have a remote turn-on lead, connect the ACC power lead to the unit. (Power is supplied to this lead when the ignition key is set to the ACC position.) Ground lead Battery extension lead Connect securely to a bare metal spot of the chassis. Connect directly to the positive (+) post of the battery.

Violet/Black

NOTE a To prevent external noise from entering the audio system:
a This product cannot be used with cars fitted with a common negative speaker system.
Locate the unit and route the leads at least 10 cm away from the car harness. Keep the battery power leads as far away from other leads as possible. Connect the ground lead securely and safely to a bare metal spot (remove the coating if necessary) of the car chassis. If you add an optional noise suppressor, connect it as far away from the unit as possible. Your Alpine Dealer carries various Alpine noise suppressors, contact them for further information. Your Alpine Dealer knows best about noise prevention measures so consult your dealer for further information.
a Make all connections securely. a Any unused connections should be insulated with electrical insulation tape. a On cars fitted with computers and other such devices (e.g. head units with security code), you may loose the memory when disconnecting the negative lead.

3. CHECK

Secure all loose cables. Reconnect the negative lead to the battery terminal.
By switching on the head unit, verify that the subwoofer is working.
Check all electrical equipment (lights, indicators, horn, etc.) in the car is functional.

4. ADJUSTMENT

1 Power indicator: Lights when power is on. 2 Input sensitivity adjustment (GAIN): Adjusts volume (increase/decrease). Decrease the volume by setting towards MIN. 3 Low pass filter frequency adjustment (LP FILTER): Adjusts the centre frequency of the low pass filter. Balance between speakers can be adjusted. 4 Phase switch: Adjusts the speaker phase. Phase alignment between speakers can be adjusted. Phase can be switched between norm phase (0 - NORM) and reverse phase (180 REV.).
1. Set the GAIN to MIN, PHASE to NORM, LP FILTER to CENTER before switching on the system. 2. Set the Bass/Treble adjustment to zero on the head unit. Set the volume to your average listening level. It may help to use a music source that is familiar. 3. Next, gradually increase the gain level. Increase the level to the point where the sound of your system, as a whole, is balanced. If the gain level is set too high, the subwoofer may begin to distort. Distortion may also occur if the volume is set too high on the head unit. Check that the other speakers have not begun to distort, before proceeding with the adjustment. If the entire speaker system in the car is distorting, reduce the volume of the head unit. 4. Once the gain has been set, adjust the LP FILTER at a frequency which compliments your speaker system. 5. Adjusting the LP FILTER will change the output volume of the subwoofer. Repeat procedures 3 and 4 until the ideal setting is found. 6. The final adjustment is the PHASE of the subwoofer. While sitting in the drivers seat and with music playing, switch between NORM and REV. Select the setting which sounds better The ideal PHASE setting varies from car to car, depending on the location of the subwoofer and the acoustic characteristics of the vehicle interior.
Car Audio and Navigation Systems

GERTE-PASS

AUDIO SYSTEME
Fahrzeugmarke: Amtl. Kennzeichen: Name des Halters: Strae: Wohnort:
Bitte fllen Sie diesen Pass vollstndig aus und bewahren Sie ihn auerhalb des Fahrzeugs auf: Im Falle eines Diebstahls wird fr Sie die Schadensabwicklung mit der Versicherung einfacher, und Sie erleichtern der Polizei die Fahndung nach den Ttern.

PS Card Euro -1

Hndlerstempel

Tips der Polizei:

[ [ [ [ [ [ Stellen Sie Ihr Fahrzeug stets gut sichtbar ab. Verschlieen Sie Tren, Fenster, Schiebedach und Kofferraum immer, auch bei nur kurzer Abwesenheit. Lassen Sie keine Wertsachen sichtbar im Auto liegen. Wird Ihr Fahrzeug aufgebrochen, wenden Sie sich sofort an die nchste Polizeidienststelle. Belassen Sie Ihr Fahrzeug nach einem Aufbruch im Originalzustand. Informieren Sie sich ber technische Sicherungsmglichkeiten bei einer kriminalpolizeilichen Beratungsstelle.