ENGLISH - PAGES 4-5
READ ALL INSTRUCTIONS BEFORE OPERATING UNIT!
ESPAOL - PGINAS 6-7 LANSE ANTES DE UTILIZAR EL APARATO Y GUARDENSE PARA SU USO POSTERIOR!
FRANAIS - PAGES 8-9 PRIERE DE LIRE AVANT LEMPLOI ET A CONSERVER POUR UTILISATION ULTERIEURE!
ITALIANO - PAGINE 10-11 LEGGERE ATTENTAMENTE PRIMA DELLUSO E CONSERVARE PER UN UTILIZZO SUCCESSIV0!
DEUTSCH - SEITEN 12-13 BITTE VOR GEBRAUCH LESEN UND FR SPTEREN GEBRAUCH AUFBEWAHREN!

- 14-15

TO PREVENT DAMAGE, FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE. NO USER SERVICEABLE PA RTS INSIDE, REFER SERVICING TO QUALIFIED PERSONNEL ONLY. DO NOT ALTER THE AC PLUG.
THIS UNIT MUST BE EARTH GROUNDED. UNPLUG THE AC POWER LINE CORD BEFORE CLEANING THE UNITS COVER ING WITH ONLY A DAMP CLOTH; WAIT UNTIL THE UNIT IS COMPLETELY DRY BEFORE RECONNECTING IT TO POWER.
PAR A EVITAR DAOS, INCENDIOS Y DESC ARGAS ELCTRICAS, NO EXPONGA ESTA UNIDAD A LA LLUVIA NI A LA HUMEDAD. CONTIENE PIEZAS CUYO MANTENIMIENTO NO LO PUEDE REA LIZAR EL USUARI O, S INO SLO PERSONAL CUALIFICADO.
NO MODIFIQUE EL ENCHUFE DE CA. ESTA UNIDAD DEBE CONECTARSE CON TOMA DE TIERRA. DESCONECTE EL CABLE DE ALIMENTACIN DE CA ANTES DE LIMPIAR LA CUBIERTA DE LA UNIDAD; ESPERE A QUE LA UNIDAD EST COMPLETAMENTE SECA ANTES DE VOLVER A CONECTARLA A LA CORRIENTE.
POUR EVITER L'ENDOMMAGEMENT DE L'APPA R E I L , UN DEPA RT D'INCENDIE, OU UN CHOC ELECTRIQUE, NE L'EXPOSEZ JAMAIS A L'HUMIDITE OU A LA PLUIE. AUCUNE MAINTENANCE NE DOIT ETRE EFFECTUEE POUR LES PIECES SITUEES DANS L'APPAREIL. LES R E PA R ATIONS ET LA MAINTENANCE DOIVENT ETRE EXECUTEES UNIQUEMENT PAR UN PERSO NNEL QUALIFIE.
NE MODIFIEZ PAS LA PRISE DE CA. CET APPAREIL DOIT ETRE MIS A LA TERRE. DEBRANCHEZ LE CABLE D'ALIMENTATION AVANT DE NETTOYER LE BOITIER DE L'APPAREIL ET AT T E N D E Z QUE L'APPAREIL SOIT COMPLETEMENT SEC AVA N T DE LE REBRANCHER SUR LE SECTEUR.
PER EVITARE DANNI, RISCHI DI INCENDI O SCOSSE ELETTRICHE, NON ESPORRE QUESTA UNIT ALLA PIOGGIA O ALL'UMIDIT. NO N CO NTIENE PA RTI RIPARAB ILI DALL'UTENTE: FARE ESEGUIRE LA MANUTENZIONE SOLTANTO DA PERSONALE QUALIFICAT O.
NON ALTERARE LA PRESA C.A. Q U E S TA UNIT DEVE ESSERE COLLEGATA A TERRA. DISCONNETTERE IL CAVO DI ALIMENTAZIONE C.A. PRIMA DI PULIRE LA COPERTURA DELL'UNIT; AT T E NDERE CHE L'UNIT SIA COMPLETAMENTE ASCIUTTA PRIMA DI RICOLLEGARLA ALL'ALIMENTA Z I O N E.
SETZEN SIE DIESES GERT NIEMALS REGEN ODER FEUCHTIGKEIT AUS, UM BESCHDIGUNG, BRANDENTWICKLUNG UND ELEKTRISCHE SCHLGEN ZU VERMEIDEN. IM GERT SIND KEINE ZU WARTENDEN TEILE. WARTUNG UND REPERATUREN DRFEN NUR VON QUALIFIZIERTEN TECHNIKERN DURCHGEFHRT WERDEN.
MANIPULIEREN SIE AUF KEINEN FALL DIE NETZANSCHLUSSBUCHSE. DAS GERT MUSS GEERDET SEIN. STECKEN SIE DAS NETZKABEL AUS, BEVOR SIE DAS GEHUSE DES GERTS REINIGEN. SCHLIESSEN SIE DAS GERT ERST WIEDER ANS STROMNETZ AN, WENN ES VOLLSTNDIG GETROCKNET IST.

Fender

Stage 100 / 100H / 160
Balanced 3-pin XLR line out jack for connection to recording or sound-reinforcement equipment. Classic Fender spring Reverb effect. Footswitch jack with channel and pre-amp switching capabilities. The operation and functions of all three versions (Stage 100 and Stage 160 amplifier/speaker combinations and the Stage 100H amplifier head only) are identical except for the speaker output functions (see items 3-5 under Rear Panel Functions).
Congratulations on your purchase of a Fender Stage 100/100H/160 amplifier. With worldclass Fender quality built-in, Stage 100/100H/160 amplifiers deliver the tone and features that todays musicians demand: Two channels with independent tone controls. Switchable More Drive pre-amp boost for harmonically rich leads. 160 watts of output power @ 4 ohms (100 watts @ 8 ohms). Rear panel Effects Loop jacks for connection to external effects devices or add-on amplifiers.

Front Panel Functions

1. INPUT 1 - Plug in your guitar at this jack. 2. INPUT 2 - A lower impedance / sensitivity input for guitars with active pickups. Both inputs are identical if used simultaneously. NOTE: The Normal channel must be selected for items 3-7 to function. See CHANNEL SELECT (item 10). 3. VOLUME (Normal Channel) - Adjusts the loudness of the of the amplifier while in the Normal channel. 4. TREBLE - Adjusts the high-frequency level of the Normal channel. 5. MID - Adjusts the mid-frequency level of the Normal channel. 6. BASS - Adjusts the low-frequency level of the Normal channel. 7. REVERB - Adjusts the REVERB effect level of the Normal channel. NOTE: The Drive channel must be selected for items 8-9 and 11-16 to function. See CHANNEL SELECT (item 10). 8. DRIVE CHANNEL-MODE INDICATORS Red LED indicates MORE DRIVE boost is ON. Yellow LED indicates MORE DRIVE boost is OFF. See MORE DRIVE pre-amp boost (Item 12).

9. DRIVE - Adjusts the pre-amp level (distortion/sustain) of the Drive channel in conjunction with Drive channel VOLUME control (item 11) to set the overall amplifier loudness. 10.CHANNEL SELECT - Button IN selects the Drive channel. Button OUT selects the Normal channel. 11.VOLUME (Drive channel)- Adjusts the amplifier loudness while in the Drive channel in conjunction with the DRIVE control (item 9). 12.MORE DRIVE - Button IN activates the MORE DRIVE pre-amp boost. This boost enhances the intensity of the DRIVE control (item 9). Button OUT deactivates MORE DRIVE boost. 13.TREBLE - Adjusts the high-frequency level of the Drive channel. 14.MID - Adjusts the middle-frequency level of the Drive channel. 15.BASS - Adjusts the low-frequency level of the Drive channel. 16.REVERB - Adjusts the REVERB effect level of the Drive channel. 17.POWER INDICATOR - Illuminates when the amplifier is ON and receiving power.

Rear Panel Functions

NOTE: Item 5 applies only to the Stage 100. 5. EXTERNAL SPEAKER (8 minimum) - Use this output jack when one 8 speaker enclosure is to be connected to the Stage 100 for additional output. The Stage 100s internal speaker must be connected while using this jack. 6. LINE OUT - This balanced XLR line-level output is designed for connection to an external power amplifier or main house mixer. The signal from this output jack includes all tone shaping done by the amplifier. 7. RETURN - This 1/4 inch, unbalanced, TS, linelevel input jack is designed to accept a signal from external effects devices or another amplifier in a daisy-chain configuration. 8. SEND - This 1/4 inch, unbalanced, TS, line-level output jack is designed to feed the preamp signal to external effects devices or to an add-on amplifier in a daisy-chain configuration. 9. FOOTSWITCH - Connect the footswitch at this jack. The two-button footswitch enables switching between Normal and Drive channels and ON/OFF switching of the MORE DRIVE pre-amplifier boost. Using this jack disables these switching functions from the front panel. NOTE: Connecting the footswitch with an unshielded speaker type cord is preferable to using a shielded coaxial guitar cord.

STAGE 100H SPEAKER JACKS

STAGE 100 SPEAKER JACK
1. POWER SWITCH - Turns the AC power ON and OFF. 2. LINE CORD - This amplifier is equipped with an IEC grounding type supply cord to reduce the possibility of shock hazard. Be sure to connect it to a grounded AC receptacle in accordance with the voltage and frequency ratings listed on the rear panel under INPUT POWER. NOTE: Items 3 and 4 apply only to the Stage 100H. 3. SPEAKER OUTPUT (8 minimum) - Use this output jack when only one 8 speaker enclosure is to be connected to the Stage 100H. If two 8 speaker enclosures are to be connected, use both parallel speaker output jacks (total load of 4). 4. SPEAKER OUTPUT (4 minimum) - Use this output jack when one 4 speaker enclosure is to be connected to the Stage 100H. (Using this jack internally switches the Stage 100H to accept a 4 load.)

Specifications

TYPE: PART NUMBER: Stage 100 (combo) PR 401 22-6700 (120V, 60Hz) US 22-6730 (240V, 50Hz) Aust 22-6740 (230V, 50Hz) UK 22-6760 (230V, 50Hz) Eur 22-6770 (100V, 50/60Hz) Jpn 400W 100W RMS into 8 @ 5%THD 160W RMS into 4 @ 5%THD INPUT 1: 850k, INPUT 2: 66k 1k 10k 810mV for 160W into 4 @1kHz 620mV for 100W into 8 @1kHz 4A125V for 100V / 120V ver 2A250V for 230V / 240V ver 2 Button - (P/N 050419) Normal/Drive, Drive/More Drive One 8 Celestion G12T-speaker (P/N 054420) 17.5 in. (45 cm) 22.4 in. (57 cm) 10.2 in. (26 cm) 42 lbs. (19.1 kg) Stage 160 (combo) PR 400 22-6800 (120V, 60Hz) US 22-6830 (240V, 50Hz) Aust 22-6840 (230V, 50Hz) UK 22-6860 (230V, 50Hz) Eur 22-6870 (100V, 50/60Hz) Jpn 400W 160W RMS into 4 @ 5%THD N/A INPUT1: 850k, INPUT 2: 66k 1k 10k 810mV for 160W into 4 @1kHz N/A 4A125V for 100V /120V ver 2A250V for 230V / 240V ver 2 Button - (P/N 050419) Normal/Drive, Drive/More Drive Two 8 Celestion G12T-speakers (P/N 054420) 18.5 in. (47 cm) 26.1 in. (66 cm) 10.3 in. (26 cm) 53 lbs. (24.1kg) Stage 100H (head only) PR 453 22-6900 (120V, 60Hz) US 22-6930 (240V, 50Hz) Aust 22-6940 (230V, 50Hz) UK 22-6960 (230V, 50Hz) Eur 22-6970 (100V, 50/60Hz) Jpn 400W 100W RMS into 8 @ 5%THD 160W RMS into 4 @ 5%THD INPUT1: 850k, INPUT 2: 66k 1k 10k 810mV for 160W into 4 @1kHz 620mV for 100W into 8 @1kHz 4A125V for 100V /120V ver 2A250V for 230V / 240V ver 2 Button - (P/N 050419) Normal/Drive, Drive/More Drive N/A 8.5 in. 22.4 in. 9.5 in. 24 lbs. (22 cm) (57 cm) (24 cm) (10.9 kg)
POWER REQUIREMENTS: POWER OUTPUT: (WITH EXTENSION SPEAKER): INPUT IMPEDANCE: FX SEND OUTPUTIMPEDANCE: FX RETURN INPUT IMPEDANCE: POWER AMPIN SENSITIVITY: FUSE: FOOTSWITCH: SPEAKER COMPLIMENT: DIMENSIONS: WEIGHT: HEIGHT: WIDTH: DEPTH:
Product specifications are subject to change without notice.
A PRODUCT OF: FENDER MUSICAL INSTRUMENTS CORPORATION CORONA, CA USA Fender is a registered trademark of FMIC

P/N 054256