Reviews & Opinions
Independent and trusted. Read before buy Blaupunkt Calgary MP35!

Blaupunkt Calgary MP35

Manual

Preview of first few manual pages (at low quality). Check before download. Click to enlarge.
Manual - 1 page  Manual - 2 page  Manual - 3 page 

Download (English)
Blaupunkt Calgary MP35 Car Audio, size: 525 KB
Instruction: After click Download and complete offer, you will get access to list of direct links to websites where you can download this manual.

About

Blaupunkt Calgary MP35About Blaupunkt Calgary MP35
Here you can find all about Blaupunkt Calgary MP35 like aux and other informations. For example: .

Blaupunkt Calgary MP35 manual (user guide) is ready to download for free.

On the bottom of page users can write a review. If you own a Blaupunkt Calgary MP35 please write about it to help other people.

 

[ Report abuse or wrong photo | Share your Blaupunkt Calgary MP35 photo ]

User reviews and opinions

<== Click here to post a new opinion, comment, review, etc.

No opinions have been provided. Be the first and add a new opinion/review.

 

Documents

doc0

Radio / CD / MP3
Calgary MP35 San Diego MP35

Operating instructions

190 310

http://www.blaupunkt.com

01Calg/SanDiego CD35 d

09.02.2005, 8:56 Uhr

CONTROLS
1 Button to switch the device on/ off and operate the volume mute function. button for detaching the control panel (release panel). button to eject a CD from the device. Volume control CD compartment AUDIO button to adjust the bass, treble, balance and fader. To select an equalizer preset. MENU button Short press: Open the settings menu. Long press: Start the scan function. Arrow buttons X-BASS button to activate/deactivate and adjust the X-BASS. TRAFRDS button Short press: Switch traffic-information standby on/off. Long press: Switch the RDS function on/off. Keys 1 - 6 < BNDTS button Short press: Select the FM memory banks and the MW and LW wavebands. Long press: Start the Travelstore function. SRC button Short press: Switch sources between CD/MP3, CD changer (if connected) and AUX. Long press: Briefly display the clock time.

02Calg/SanDiegoMP35_gb

09.02.2005, 13:50 Uhr

CONTENTS

Notes and accessories. 32 Removable control panel.. 33 Switching on/off.. 34 Adjusting the volume. 35 Radio mode.. 36
Adjusting the tuner settings. 36 Switching to radio mode. 37 RDS functions.. 37 Selecting the waveband / memory bank.. 37 Tuning into a station.. 38 Setting the sensitivity of station seek tuning.. 38 Storing stations.. 38 Storing stations automatically (Travelstore).. 39 Listening to stored stations. 39 Scanning receivable stations (SCAN).. 39 Setting the scanning time.. 39 Programme type (PTY).. 39 Optimising radio reception.. 41 Configuring the display.. 41 Preparing an MP3-CD. 46 Switching to MP3 mode. 47 Configuring the display.. 47 Selecting a directory. 48 Selecting tracks/files.. 48 Fast searching.. 48 Random track play (MIX).. 48 Scanning tracks (SCAN).. 49 Repeating individual tracks or whole directories (REPEAT). 49 Pausing playback (PAUSE). 49
DEUTSCH DANSK PORTUGUS ESPAOL SVENSKA NEDERLANDS ITALIANO FRANAIS ENGLISH

MP3 mode.. 46

CD-changer mode.. 50
Switching to CD-changer mode. 50 Selecting CDs.. 50 Selecting tracks. 50 Fast searching (audible). 50 Configuring the display.. 50 Repeating individual tracks or whole CDs (REPEAT).. 50 Random track play (MIX).. 51 Scanning all the tracks on all the CDs (SCAN).. 51 Pausing playback (PAUSE). 51
Traffic information.. 42 CD mode.. 43
Switching to CD mode.. 43 Selecting tracks. 43 Fast track selection. 43 Fast searching (audible). 43 Random track play (MIX).. 44 Scanning tracks (SCAN).. 44 Repeating tracks (REPEAT). 44 Pausing playback (PAUSE). 44 Configuring the display.. 44 Displaying CD text.. 45 Traffic announcements in CD mode. 45 Ejecting a CD.. 45
Remote control.. 52 CLOCK time.. 52 Sound.. 53 X-BASS.. 55 Configuring the level display. 55 External audio sources. 56 Specifications.. 56

NOTES AND ACCESSORIES

Notes and accessories
Thank you for choosing a Blaupunkt product. We hope you enjoy using this new piece of equipment. Please read these operating instructions before using the equipment for the first time. The Blaupunkt editors are constantly working on making the operating instructions clearer and easier to understand. However, if you still have any questions on how to operate the device, please contact your dealer or the telephone hotline for your country. You will find the telephone number printed at the back of this booklet. We provide a manufacturer guarantee on our products bought within the European Union. You can view the guarantee conditions at www.blaupunkt.de or ask for them directly at: Blaupunkt GmbH Hotline Robert Bosch Str. 200 D-31139 Hildesheim Gerrmany vehicle. For this reason, listen to your car sound system at a moderate volume level during your journey.

Note: When attaching the control panel, make sure you do not press the display. If the device was still switched on when you removed the control panel, it will automatically switch on again with the last settings activated (i.e. radio, CD/ MP3, CD changer or AUX) when the panel is replaced.

Press the

button 2.
The control panel locking mechanism opens.

SWITCHING ON/OFF

Switching on/off
You can switch the device on/off in the following ways: Switching on/off using the vehicle ignition If the device is correctly connected to the vehicles ignition and it was not switched off using button 1, it will switch on/off simultaneously with the ignition. Switching on/off using button 1 Note: If the vehicle ignition was switched off before you inserted the CD, you will first have to switch on the device by pressing button 1 in order to start playing the CD. Switching on/off using the removable control panel
Remove the control panel.

The unit switches off.

Attach the control panel again.
The unit switches on. The settings (radio, CD/MP3, CD changer or AUX) that were set before the unit was switched off will be reactivated.
To switch on the device, press button 1.
To switch off the device, press and
hold down button 1 for longer than two seconds. The device switches off.
Note: To protect the vehicle battery, the device will switch off automatically after one hour if the ignition is off.
Switching on by inserting a CD If the device is switched off and there is no CD present in the drive, gently push the CD with its printed side uppermost into the drive 5 until you feel some resistance. The drive draws in the CD automatically. You must not hinder or assist the drive as it draws in the CD. The device switches on and starts playing the CD.

ADJUSTING THE VOLUME

You can adjust the volume in steps from 0 (off) to 66 (maximum). To increase the volume,

Adjusting the volume

press the press the

button 4. button 4.

To decrease the volume,
Setting the power-on volume
Note: The device is equipped with a timeout function. If, for instance, you press the MENU button 7 and select a menu item, the device will switch back approx. 8 seconds after the last button was pressed. Any changes to the settings that you have made will be saved. You can set the power-on volume. Press the MENU button 7. Press the or button 8 repeatedly until ON VOLUME appears in the display. Adjust the power-on volume using the buttons 8. To help you adjust the setting more easily, the device will increase or decrease the volume as you make your changes. If you change the setting to LAST VOL, the volume level that was set the last time you switched off the device will be activated again.
Note: To protect your hearing, the poweron volume is limited to a value of 38. If the volume level was higher than this when the device was last switched off and the LAST VOL setting is activated, the system will reset the volume to 38 when you switch the device on again. When you have finished adjusting the setting,

press the MENU button 7 twice. Quick volume reduction (mute)
You can quickly decrease the volume (mute) to a level preset by you.

Briefly press button 1.

MUTE appears in the display. Cancelling mute To return to your previously set volume level,
briefly press button 1 again.
Setting the mute level You can adjust the mute level.
Press the MENU button 7. Press the or button 8 repeatedly until MUTE LVL appears in the display.
Adjust the mute level using the
buttons 8. When you have finished adjusting the setting,
press the MENU button 7 twice.
Switching the confirmation beep on/off
The system will play a confirmation beep for some functions if you keep a button pressed down for longer than two seconds, for instance, when you assign a radio station to a station button. You can switch the beep on/off.

RADIO MODE

Radio mode
Adjusting the tuner settings
To ensure that the tuner works properly, the device must be configured for the region in which it is being used. You can choose between Europe (EUROPE), United States (USA), South America (SAMERICA) and Thailand (THAI). By default, the tuner is set to the region in which the device was sold. If you encounter problems with radio reception, please check this setting. The radio functions described in these operating instructions refer to the EUROPE tuner setting. Switch the device off using button 1. Press and hold down the 1 and 5 buttons ; simultaneously and switch on the device again by pressing button 1. TUNER is displayed. Select your tuner region using the or button 8. To save the setting, switch the device off and on again or wait approx. 8 seconds. The car sound system switches on and the mode that was selected last is activated (radio, CD/MP3, CD changer or AUX).
Press the MENU button 7. Press the or button 8 repeatedly until BEEP ON or BEEP OFF appears in the display.
Activate/deactivate the beep using
buttons 8. OFF means the the beep is switched off and ON means the beep is switched on. When you have finished adjusting the setting,
press the MENU button 7. Mute while telephoning
If your device is connected to a mobile telephone, the car radios volume will be muted as soon as you pick up the telephone. This requires that the mobile telephone be connected to the device as described in the installation instructions. PHONE appears in the display.
If you are in CD/MP3, CD-changer or AUX mode,

Switching to radio mode

Switching the RDS function on/off If you want to use the RDS functions (AF and REGIONAL),
press the BNDTS button <
press and hold down the TRAF
RDS button : for longer than two seconds. The RDS function is active when the RDS symbol is shown in the display. Switching REGIONAL on/off

press the SRC

button = repeatedly until the memory bank (e.g. FM1) appears in the display.

RDS functions

This device is equipped with an RDS radio receiver (Radio Data System). Many of the receivable FM stations broadcast a signal that not only carries the programme but also additional information such as the station name and programme type (PTY). The station name appears in the display as soon as the tuner receives it. The convenient RDS functions AF (Alternative Frequency) and REGIONAL extend your radios range of functions. AF: If the RDS function is activated, the radio automatically tunes into the best receivable frequency for the station that is currently set. REGIONAL: At certain times, some radio stations divide their programme into regional programmes providing different content. You can use the REG function to prevent the car radio from switching to alternative frequencies that are broadcasting different programme content. Note: REGIONAL must be activated/deactivated separately in the menu.
Press the MENU button 7. Press the or button 8 repeatedly until REG appears in the display. OFF or ON is displayed alongside REG.
To switch REGIONAL on/off, press

the or button 8.

Press the MENU button 7. Selecting the waveband / memory bank
You can use this device to receive programmes broadcast over the FM frequency range as well as the MW and LW (AM) wavebands. There are three memory banks available for the FM waveband (FM1, FM2 and FMT) and one for each of the MW and LW wavebands. Six stations can be stored in each memory bank. To switch between the FM memory banks (FM1, FM2 and FMT) and the MW and LW wavebands,
briefly press the BNDTS button

Tuning into a station

There are various ways of tuning into a station. Automatic station seek tuning
Setting the sensitivity of station seek tuning

You can choose whether the radio should only tune into stations providing good reception or whether it can also tune into those with a weak reception.

button 8.

The radio tunes into the next receivable station. Tuning into stations manually You can also tune into stations manually.
Press the MENU button 7. Press the or button 8 repeatedly until SENS and the currently set value appear in the display. SENS HI6 means that the tuner is set to the highest sensitivity setting. SENS LO1 means it is set to the lowest sensitivity setting.
Note: You can only tune into stations manually if the RDS function is deactivated. or button 8.
Set the desired sensitivity using the
Browsing through broadcasting networks (only FM) If radio stations provide several programmes, you have the option of browsing through their broadcasting networks.

press the MENU button 7.

Note: You can set different sensitivity levels for FM and MW or LW (AM).
Note: The RDS function must be activated before you can use this feature. or button 8 to switch to the next station on the broadcasting network.

Storing stations

Storing stations manually
Select the memory bank that you
want (FM1, FM2, FMT) or one of the wavebands (MW or LW). Tune into the station that you want.
Note: When using this feature, you will only be able to switch to stations that you have received once before already. To receive the stations, use the scan function or the Travelstore function.
Press and hold down one of the
station buttons 1 - 6 ; for longer than two seconds to assign the station to that button.
Storing stations automatically (Travelstore)
You can automatically store the six stations providing the best reception in the region (only FM). The stations are stored in the FMT memory bank. Note: Any stations previously stored in this memory bank are deleted in the process.
Scanning begins. SCAN appears briefly in the display followed by a flashing display of the current station name or frequency. Cancelling SCAN and continuing listening to a station

Press the MENU button 7.

Scanning stops and the radio continues playing the station that it tuned into last.
Press and hold down the BNDTS
button < for longer than two seconds. The storing procedure begins. FM TSTORE appears in the display. After the process has completed, the radio will play the station that is stored in memory location 1 of the FMT memory bank.

Setting the scanning time Press the MENU button 7. Press the or button 8 repeatedly until SCAN TIME appears in the display.
Set the desired scanning time usbuttons 8. ing the When you have finished adjusting the setting,
Listening to stored stations Select the memory bank or waveband.
Note: The scanning time that you set is also used when scanning in CD/ MP3 mode and in CD-changer mode.
Press the station button 1 - 6 ;
that corresponds to the station that you want to listen to.
Scanning receivable stations (SCAN)
You can use the scan function to listen to all the receivable stations briefly. You can set the scanning time in the menu to between 5 and 30 seconds (in steps of 5 seconds). Starting SCAN

Programme type (PTY)

Besides transmitting the station name, some FM stations also provide information on the type of programme they are broadcasting. Your car radio can receive and display this information. For example, the programme types can be: CULTURE TRAVEL JAZZ SPORT NEWS POP ROCK CLASSICS 39
Press and hold down the MENU
button 7 for longer than two seconds.
You can use the PTY function to select stations of a particular programme type. PTY-EON If you specify the programme type and start seek tuning, the radio will switch from the current station to a station of the selected programme type. Notes: If the tuner does not find a station that matches the selected programme type, you will hear a beep and NO PTY appears briefly in the display. The radio will then retune to the station that it received last. If the tuned radio station or another station on the broadcasting network broadcasts your selected programme type at a later point in time, the radio will automatically switch from the currently tuned station or from CD mode or CDchanger mode to the station whose programme type matches the one you selected. Switching PTY on/off Selecting the PTY language You can select the language in which the programme types are displayed. The following are available: DEUTSCH, ENGLISH and FRANAIS.
Press the MENU button 7. Press the or button 8 repeatedly until PTY LANG appears in the display.
Set your preferred language using
buttons 8. the When you have finished adjusting the setting,
Selecting a programme type and starting seek tuning
The current programme type appears in the display.
If you want to select another programme type, you can do so by pressing the or button 8 whilst this display is visible. The selected programme type appears briefly in the display.
Press the MENU button 7. Press the or button 8 repeatedly until PTY ON or PTY OFF appears in the display.

Adjust the volume using the
Notes: You can use the volume control 4 to adjust the volume during a traffic announcement for the duration of that announcement. You can set the volume distribution for the traffic announcements. For further details, please read the Sound chapter.

CD MODE

You can use this device to play standard audio CDs, CD-Rs and CD-RWs with a diameter of 12 or 8 cm. Risk of severe damage to the CD drive! Contoured CDs (shape CDs) are not suitable for playback in this unit. We do not accept responsibility for any damage to the CD drive that may occur as a result of the use of unsuitable CDs. To ensure the system functions properly, only use CDs labelled with the compact disc logo. Problems might be experienced when playing copy-protected CDs. Blaupunkt cannot guarantee the proper functioning of copy-protected CDs! Besides being able to play audio CDs on this device, you can also play CDs containing MP3 music files. For further details, please read the MP3 mode chapter.

CD mode

Note: If the vehicle ignition was switched off before you inserted the CD, you will first have to switch on the device by pressing button 1 in order to start playing the CD. If there is already a CD inserted in the drive, press the SRC button = repeatedly until CD appears in the display. Playback begins from the point at which it was last interrupted.
Selecting tracks Press one of the arrow buttons 8
to select the next or previous track. If you press the or button 8 once, the current track will be played again from the beginning.

Fast track selection

For fast track selection (backwards or forwards),
press and hold down one of the
buttons 8 until fast-reverse / fast-forward track selection begins.

Switching to CD mode

If there is no CD inserted in the drive, gently push the CD with the printed side uppermost into the CD compartment 5 until you feel some resistance. The drive draws in the CD automatically. You must not assist or hinder the drive as it draws in the CD. The CD starts playing.

Fast searching (audible)

For fast searching (backwards or forwards),
buttons 8 until fast searching backwards / forwards begins.
Random track play (MIX) Press the 5 MIX button ;.
MIX CD appears briefly in the display and the MIX symbol lights up. The next randomly selected track will then be played. Cancelling MIX track is repeated continuously until you deactivate RPT. Cancelling REPEAT If you want to cancel the repeat function,
press the 4 RPT button ; again.
RPT TRCK appears briefly in the display and the RPT symbol is displayed.

press the MENU button 7. Press the or button 8 repeatedly until CD DISP appears in the display.

Switching to MP3 mode

MP3 mode is activated in the same way as normal CD mode. For further details, please read the section entitled Switching to CD mode in the CD mode chapter.
Select the option that you want using the or button 8. When you have finished adjusting the setting,
Configuring the MP3 scrolling text One of the following scrolling texts is displayed once every time the track is changed. Afterwards, the configured default display is shown. The available scrolling texts are: Directory name (DIR NAME) Track name (SONG NAME) Album name (ALBM NAME) Artist name (ARTIST) File name (FILE NAME) Note: The artist, track and album names are part of the MP3-ID tag (version 1) and can only be displayed if they have been saved with the MP3 files (for further details, please read the instructions that came with your PCs MP3 software or burner software). To switch between the different display options,

Selecting a directory

To move up or down to another directory,

press the

or several times.

button 8 once or

Selecting tracks/files
To move up or down to another track/ file in the current directory, press the or button 8 once or several times. If you press the button 8 once, the current track will be played again from the beginning.

Fast searching

For fast searching (backwards or forwards), press and hold down the or button 8 until fast searching backwards / forwards begins.

Random track play (MIX)

To play the tracks in the current directory in random order, briefly press the 5 MIX button ;. MIX DIR appears in the display and the MIX symbol lights up. To play all the tracks on the inserted MP3-CD in random order, press and hold down the 5 MIX button ; for longer than two seconds. MIX CD appears in the display and the MIX symbol lights up.
press the MENU button 7. Press the or button 8 repeatedly until MP3 DISP appears in the display. or button 8 to select the MP3 scrolling text that you want. When you have finished adjusting the setting,

Use the

Cancelling MIX To cancel MIX, briefly press the 5 MIX button ;. MIX OFF appears in the display and the MIX symbol disappears.

DEUTSCH

Repeating individual tracks or whole directories (REPEAT)
To play the current track repeatedly,
briefly press the 4 RPT button ;.
RPT TRCK appears briefly in the display and RPT lights up. To play the whole directory repeatedly,
ENGLISH DANSK PORTUGUS ESPAOL SVENSKA NEDERLANDS ITALIANO FRANAIS

press and hold down the 4 RPT
button ; for longer than two seconds. RPT DIR appears in the display. Cancelling REPEAT To stop the current track or current directory from being repeated,
button 7 for longer than two seconds. The next track will then be scanned. TRK SCAN appears in the display alongside the flashing track numbers. The tracks on the CD are briefly played in ascending order. Note: You can set the scanning time. For details on setting the scanning time, please read the section entitled Setting the scanning time in the Radio mode chapter. Cancelling SCAN and continuing listening to a track
RPT OFF appears briefly and RPT disappears from the display.
Briefly press the MENU button 7.
The currently scanned track will then continue to be played normally.

CD-CHANGER MODE

CD-changer mode
Note: Information on handling CDs, inserting CDs and operating the CD changer can be found in the operating instructions supplied with your CD changer.
There are five display options available for CD-changer mode: Track number and playing time (TRCK-TIME) Track number and clock time (TRCK-CLK) CD number and track number (CD-TRCK) CD number and clock time (CD-CLK) CD number and playing time (CD-TIME)
Switching to CD-changer mode Press the SRC button = repeatedly until CHANGER appears in the display. The device starts playing the first CD that the CD changer detects.

Selecting CDs

To move up or down to another CD,
Press the MENU button 7. Press the or button 8 repeatedly until CDC DISP appears in the display.
Note: The device will ignore empty CD slots in the changer and slots containing invalid CDs.
or button 8 repeatedly until the option that you want is displayed.
Press the MENU button 7 twice. Repeating individual tracks or whole CDs (REPEAT)
To repeat the current track,

Selecting tracks

To move up or down to another track on the current CD,
RPT TRCK appears briefly in the display and RPT is displayed. To repeat the current CD,
button ; for longer than two seconds. RPT DISC appears briefly in the display and RPT is displayed.
Cancelling REPEAT To stop the current track or current CD from being repeated,
Scanning all the tracks on all the CDs (SCAN)
To scan (briefly play) all the tracks on all the inserted CDs in ascending order, press and hold down the MENU button 7 for longer than two seconds. TRK SCAN appears in the display and the number of the current track flashes. Cancelling SCAN To stop scanning, briefly press the MENU button 7. The currently scanned track will then continue to be played normally. Note: You can set the scanning time. For further details, please read the section entitled Setting the scanning time in the Radio mode chapter.
RPT OFF appears and RPT disappears from the display.

To play the tracks on the current CD in random order,
briefly press the 5 MIX button ;.
MIX CD appears briefly in the display and MIX is displayed. To play the tracks on all the inserted CDs in random order, press and hold down the 5 MIX button ; for longer than two seconds. MIX ALL appears briefly in the display and MIX is displayed. Cancelling MIX
Briefly press the 5 MIX button ;.
MIX OFF appears and MIX disappears from the display.

REMOTE CONTROL

Remote control

Calgary MP35

Your car radio is equipped with an integrated infrared remote-control receiver. The receiver is built into the detachable control panel. You can safely and conveniently control the majority of the devices functions using a steering-wheel remote control or handheld remote control (available as optional accessories). You cannot switch the device on/off using the remote control. Note: The infrared receiver that is included with the remote control only needs to be installed (as described in the installation instructions) if there is no direct line-of-sight connection between the remote control and the car radio.

CLOCK TIME

CLOCK time
Displaying the clock time
To display the clock time briefly,
press and hold down the SRC
button = until the clock time appears in the display.

Setting the clock time

To set the clock time,
press the MENU button 7. Press the or button 8 repeatedly until CLOCK SET appears in the display.
The clock time appears in the display. The hours flash and can be adjusted.
Adjust the hours using the
tons 8. Once the hours are set,

San Diego MP35

The San Diego MP35 is supplied with the RC 12H handheld remote control. The infrared receiver is built into the detachable control panel. An additional receiver is not included.

The minutes flash.

Adjust the minutes using the

buttons 8.

Press the MENU button 7 twice. Selecting 12/24-hour clock mode Press the MENU button 7.
MENU appears in the display.
or button 8 repeatedly until 24 H MODE or 12 H MODE appears in the display.
or button 8 to switch between the modes.
When you have finished adjusting the setting,
You can adjust the sound settings (bass and treble) separately for each source (radio, CD/MP3, CD changer or AUX). The volume distribution settings (balance and fader) apply to all the audio sources (except for traffic announcements). You can only adjust the balance and fader settings for traffic announcements whilst a traffic announcement is actually being played.

press the MENU button 7. Displaying the time continuously when the device is off and the ignition is on
To display the time when the device is off and the vehicle ignition is on,
or button 8 repeatedly until CLOCK OFF or CLOCK ON appears in the display.
Adjusting the bass Press the AUDIO button 6.
BASS appears in the display.
or button 8 to switch between the ON/OFF settings. When you have finished adjusting the setting,
or button 8 to adjust the bass. When you have finished adjusting the setting,
press the MENU button 7. Briefly displaying the time when the device is switched off
To display the time briefly when the device is off,
press the AUDIO button 6. Adjusting the treble Press the AUDIO button 6.

button =.

The time is displayed for approx. 8 seconds.
button 8 repeatedly until TREBLE appears in the display.
or button 8 to adjust the treble. When you have finished adjusting the setting,
press the AUDIO button 6.
Setting the left/right volume distribution (balance)
To adjust the left/right volume distribution (balance),

Equalizer presets

This device is equipped with an equalizer that has been preset with settings for the ROCK, POP and CLASSIC music styles. To select an equalizer preset,

Press the Press the

button 8 repeatedly until BAL appears in the display.
or button 8 to adjust the balance (right/left). When you have finished adjusting the setting,
button 8 repeatedly until POP, ROCK, CLASSIC or EQ OFF appears in the display.
press the AUDIO button 6. Adjusting the front/rear volume distribution (fader)
To adjust the front/rear volume distribution (fader),
or button 8 to select one of the presets or select EQ OFF to switch off the equalizer. If you select one of the presets, it is shown continuously in the display. When you have finished adjusting the setting,
button 8 repeatedly until FADER appears in the display.
or button 8 to adjust the fader (front/rear). When you have finished adjusting the setting,

X-BASS

You can use the X-Bass feature to boost the bass at low volume levels. The selected X-Bass setting affects all the audio sources (radio, CD/MP3, CD changer or AUX). You can set the X-BASS boost in steps ranging from 1 to 3. XBASS OFF means that the X-BASS function is switched off. Adjusting the X-BASS boost

LEVEL DISPLAY

Configuring the level display
The level display temporarily provides you with a symbolic representation of the volume and audio settings whilst you are adjusting them. When you are not changing any settings, the level display depicts the peak music/speech output. You can switch the level display on/off.

EA Calg/SanDiego

09.02.2005, 8:46 Uhr

PORTUGUS

ESPAOL

SVENSKA

NEDERLANDS

ITALIANO

FRANAIS

ENGLISH

Country: Germany Austria Belgium Denmark Finland France Great Britain Greece Ireland Italy Luxembourg Netherlands Norway Portugal Spain Sweden Switzerland Czech. Rep. Hungary Poland Turkey USA Brasil (Mercosur) Malaysia (Asia Pacific) (D) (A) (B) (DK) (FIN) (F) (GB) (GR) (IRL) (I) (L) (NL) (N) (P) (E) (S) (CH) (CZ) (H) (PL) (TR) (USA) (BR)
Phone: 0180-5000225 01-0 02-360 09-01-01-01-4149400 02-023-66-01-08-7501500 01-8471644 02-01-0800-118922 0212-69 800-2662528 +55-2769
Fax: 05121-01-391 02-44-09-01-01-01-4598830 02-023-66-01-4078 08-7501810 01-8471650 02-01-022-8771260 0212-40 708-6817188 +55-2773 +604-6413 640
WWW: http://www.blaupunkt.com

(MAL) +604-6382 474

Gertepass

Name: Typ: Serien-Nr:..

7 645..
Blaupunkt GmbH, Robert-Bosch-Strae 200, D-31139 Hildesheim

02/05 - CM/ASA

(DE) Hinweis zum PTY-EON-Empfang
Wenn Ihr Blaupunkt-Gert von einem gehrten Radioprogramm zu einem anderen Radioprogramm oder von einer gewhlten Quelle (CD oder CD-Wechsler) zu einem Radioprogramm umschaltet, so berprfen Sie bitte, ob Sie PTY (Programm-Typ) eingeschaltet haben. Mchten Sie diese PTY-EON-Umschaltung nicht haben, so schalten Sie diese im Men mit PTY off aus. Drcken Sie zuvor eine der Tasten AUDIO, SRC oder BND. Bitte lesen Sie dazu auch in der Bedienungsanleitung unter Radiobetrieb den Absatz Programm-Typ (PTY).
(GB) Note regarding PTY-EON reception
If your Blaupunkt system switches from your chosen radio programme to another radio programme or from your chosen audio source (CD or CD changer) to a radio programme, please check whether you have activated the PTY (programme type) function. If you do not want this PTY-EON switching to occur, you should deactivate it in the menu by selecting PTY off. Press one of the AUDIO, SRC or BND buttons beforehand. Please also read about this in the operating instructions in the section entitled Programme type (PTY) under Radio mode.
(FR) Remarque concernant la rception PTY EON
Quand votre appareil Blaupunkt commute dune mission de radio que vous tes en train dcouter un autre programme radio ou dune source (CD ou changeur CD) que vous avez choisie, assurez-vous davoir activ PTY (type de programme). Si vous ne souhaitez pas cette commutation PTY EON, dsactivez-la en slectionnant PTY off dans le menu. Appuyez au pralable sur lune des touches AUDIO, SRC ou BND. Pour plus dinformations, reportez-vous galement au paragraphe Type de programme (PTY) du chapitre Mode radio du mode demploi.

 

Tags

4matic SDV434 LH-D6235 IC-703 MDR-V900HD NN-E225mbbpq HM70-100 SA-XR700 DVD-HR777A SX400 MHC881 Yamaha M-60 DJ-X7T Messenger R-612 12 0 Manager 2000 L74810 Research P-10 SX115 Omron IW2 RFX-1100 Siemens A35 P300D WTC1233K W2261VP-PF HD160JJ-B SGH-C300B Citiz CO Frame 2 ETX-105EC All-IN-ONE Microtower Imagepress 1110 DVD-H40A UX-P410 LE15S51B Liebherr GN P350S TA-VA80ES Microwave PS-500 CC4001 TK-7160 LC-26DA5U XS 202S Inspiron 4100 Model ONE MF6530 FH-P4100R Malibu 2002 26PF5320-28 W61PC E2607WS CQ-VD7005U Curve 8500 CM-64 LE40A856s1W 550710 AT3720 NAV4802 Aspire 3610 Gigax 1116 Inmotion IM3 SC-HT878 1250 MD SA-DX950 HMX-U10BP Conga Juno-2 WTD 2900 DB238R LT17M24CU Premicell DMR-E30 PSR7000 12000T FE1405 MRV-F407 KD-MX3000R KC-W45 Nokia 6020 CMT-J100 DVK-9711N KX-TC1500B WF-T552 Ekhbrd014AAV1 RMR136HG DSC-V1 E3350 Wolfcraft 6165 EPL-6100 Strd2020 BOX SE GX-350 Rings Iimj7 Qd786 A PRO 61 Motorola C123

 

manuel d'instructions, Guide de l'utilisateur | Manual de instrucciones, Instrucciones de uso | Bedienungsanleitung, Bedienungsanleitung | Manual de Instruções, guia do usuário | инструкция | návod na použitie, Užívateľská príručka, návod k použití | bruksanvisningen | instrukcja, podręcznik użytkownika | kullanım kılavuzu, Kullanım | kézikönyv, használati útmutató | manuale di istruzioni, istruzioni d'uso | handleiding, gebruikershandleiding

 

Sitemap

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101