Reviews & Opinions
Independent and trusted. Read before buy Sony SDM-HS95!

Sony SDM-HS95

Manual

Preview of first few manual pages (at low quality). Check before download. Click to enlarge.
Manual - 1 page 

Download (English)
Sony SDM-HS95 Monitor, size: 5.8 MB
Related manuals
Sony SDM-HS95p Annexe 1
Sony SDM-HS95ps Product Brochure
Sony SDM-HS95PS
Sony SDM-HS95P
Sony SDM-HS95D

Instruction: After click Download and complete offer, you will get access to list of direct links to websites where you can download this manual.

About

Sony SDM-HS95About Sony SDM-HS95
Here you can find all about Sony SDM-HS95 like b and other informations. For example: driver.

Sony SDM-HS95 manual (user guide) is ready to download for free.

On the bottom of page users can write a review. If you own a Sony SDM-HS95 please write about it to help other people.

 

[ Report abuse or wrong photo | Share your Sony SDM-HS95 photo ]

Video review

sony sdm hs95

 

User reviews and opinions

<== Click here to post a new opinion, comment, review, etc.

Comments to date: 5. Page 1 of 1. Average Rating:
vivek_v11 9:47pm on Sunday, August 22nd, 2010 
Over the past two years, I have managed to get my hands on three of these fine examples of LCD technology. Until today. I recently decided to increase my primary home PC monitor size to the 19 inch format. As I still enjoyed the solid performance of my Sony 17" LCD SDM,...
solibar 9:52am on Tuesday, August 3rd, 2010 
This monitor looks stylish and this was one of my main reasons for choosing it. Stylish Modern Compact on Desk.
sabhain 3:52am on Tuesday, May 11th, 2010 
Dual inputs and low power consumption 1280x1024 optimum resolution, glossy LCD coating creates glare Bright(!) picture, lightweight, small footprint Limited text and graphics detail, limited viewing angle,limited contrast.
cognizance 2:45am on Monday, May 10th, 2010 
Everyone who sees this monitor displaying vid...  We get just as much use our of this 19" than any widescreen up to below 24". Well I got my SDM-HS95S 2 years ago, I just l...  SUPERIOR IMAGE QUALITY! N O N E ! For the Price I paid: $280 - Refubrished, I g...  Text and Images are very sharp, the screen is very bright, Price, Minimalist Design.
OfficeWeasel 8:40am on Thursday, March 25th, 2010 
works and works well in everything. this monitor is now a few years old and it still works like new.

Comments posted on www.ps2netdrivers.net are solely the views and opinions of the people posting them and do not necessarily reflect the views or opinions of us.

 

Documents

doc0

SDM-HS95P/S

19" Digital Display
Key Features 19" display (1280 x 1024) (measured diagonally) 400 cd/m2, 550:1, 12ms video response time PC Inputs: Digital (DVI-D) and Analog (HD15) XBRITE LCD Technology
Key Technologies Phenomenal performance You can be confident that you're getting a high-performance computer display based
on Sonys award-winning television technology.
Enhances personal computing Images come alive with high brightness, exceptional contrast and incredibly
fast video response time making this display stand out for multimedia, video and high-speed.
Sony Only Technologies XBRITE LCD Technology optimizes brightness, color, clarity and viewing angle while
ErgoBright technology optimizes brightness for any lighting condition, reducing eyestrain.
Streamlined profile Slender rising design blends seamlessly into any space, keeping it looking modern,
organized and clutter-free.
Analog and Digital Inputs Dual inputs ensure compatibility with todays analog and digital systems. Ready for
digital computer systems when youre ready to transition.
Versatile and easy to use Connect and go! Sony's automatic image adjustment feature optimizes your display's
performance instantly. Wall mountable. Macintosh and PC compatible.

Features

Picture Modes: PC, Movie, Game, Auto Color Temperature: 9300k, 6500k, 5000k Panel Type: a-Si-TFT Active Matrix LCD Panel Video Processing: N/A XBRITE LCD Technology: Yes Display Technology: LCD Plug & Play: DDC2B Safety Regulations: UL, cUL, CB, FCC, IC, Eco Info
Service and Warranty Information
Extended Warranty: 4th and 5th year available Limited Warranty: 3 years parts, 3 years labor, 3 years backlight

Dimensions

Weight: 13.2 lbs (6 Kg) Measurements: 17 1/10 x 16 1/2

Convenience

Multiple Language Display: English, French, Spanish, Italian, German, Japanese, Dutch, Swedish, Russian, Chinese

Operating Conditions

Colors: 16.2 million Luminance: 400 cd/m Pixel Pitch: 0.294mm Screen Treatment: Anti-Glare, Protective Coating Vertical Refresh Range: 48-75Hz

Specifications

General

Screen Size: 19.0"

Horizontal Scan (KHz) for PC: 28k-80KHz Closed Caption Decoder: N/A Contrast Ratio: 550:1 Display Resolution: 1280 x 1024 Display Response Time: 12ms Image Retention Protection: N/A Viewing Angle: Horizontal: 160 Vertical: 160 ,

Software

Operating System Compatibility: Windows Logo Compliance, Windows XP, Macintosh

Hardware

Auto-Sensing Input: Yes Color Systems: N/A Mount Design: N/A Remote Control: N/A
Cable Management System: Yes ErgoStand Design: Ergonomic Fixed Height On Screen Controls: Power, Menu, Contrast, Brightness, Eco Modes, Color Temp, R/B Adj, Auto Input Sense, Backlight, Auto Adjust, H/V Adjust, Phase, Pitch, Reset, Gamma, Sharpness, Menu Lock, OSD Position Stand Tilt Range: to Wall/Arm Mount: 75mm Kensington Lock: Yes

Supplied Accessories

CD-ROM User Manual AC Power Cord Quick Setup Guide Windows & Macintosh Utility Files HD15 Video Signal Cable Warranty Card DVI Digital Cable Color: Silver Chassis with Black Control Panel Strip UPC Code: 027242666184
2005 Sony Electronics Inc. All rights reserved. Sony, ErgoBright, ErgoStand and XBRITE are trademarks of Sony. All other trademarks are property of their respective owners. Features and specifications are subject to change without notice. Nonmetric weights and measures are approximate.

Inputs and Outputs

Analog Video Input(s): 1 (Rear) - Analog (HD-15) DVI Connection Input(s): 1 (Rear) - Digital (DVID) PC Video Input(s): 2 (1-DVI-D, 1-HD15)
Internal Power Supply: Yes Power Consumption: Normal Operation: 60W (max), Standard Operation: 36W (typical), Active Off: 1W (max), Main Switch Off: 1W Power Requirements: 100V - 240V AC, 50-60Hz
Regulation and Standard Compliance
Emissions/Ergonomics: N/A Energy Star Compliant: Yes
Please visit the Dealer Network for current information at www.sony.com/dn
Sony Electronics Inc. 16530 Via Esprillo San Diego, CA 92127 800.222.7669 www.sony.com

Last Updated: 07/25/2006

doc1

2-583-745-03(1)
TFT LCD Color Computer Display
Operating Instructions GB

SDM-HS75 SDM-HS95

2004 Sony Corporation

Owners Record

The model and serial numbers are located at the rear of the unit. Record these numbers in the spaces provided below. Refer to them whenever you call upon your dealer regarding this product. Model No. Serial No.

NOTICE

This notice is applicable for USA/Canada only. If shipped to USA/Canada, install only a UL LISTED/CSA LABELLED power supply cord meeting the following specifications: SPECIFICATIONS Plug Type Nema-Plug 5-15p Cord Type SVT or SJT, minimum AWG Length Maximum 15 feet Rating Minimum 7 A, 125 V

WARNING

To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. Dangerously high voltages are present inside the unit. Do not open the cabinet. Refer servicing to qualified personnel only. FCC Notice
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. You are cautioned that any changes or modifications not expressly approved in this manual could void your authority to operate this equipment.
Cette notice sapplique aux Etats-Unis et au Canada uniquement. Si cet appareil est export aux Etats-Unis ou au Canada, utiliser le cordon dalimentation portant la mention UL LISTED/CSA LABELLED et remplissant les conditions suivantes: SPECIFICATIONS Type de fiche Fiche Nema 5-15 broches Cordon Type SVT ou SJT, minimum AWG Longueur Maximum 15 pieds Tension Minimum 7 A, 125 V
As an ENERGY STAR Partner, Sony Corporation has determined that this product meets the ENERGY STAR guidelines for energy efficiency.

IMPORTANTE

Para prevenir cualquier mal funcionamiento y evitar daos, por favor, lea detalladamente este manual de instrucciones antes de conectar y operar este equipo.
If you have any questions about this product, you may call; Sony Customer Information Services Center 1-800-222-7669 or http://www.sony.com/
Declaration of Conformity
Trade Name: Model: SONY SDM-HS75 SDM-HS95 Responsible Party: Sony Electronics Inc. Address: 16450 W. Bernardo Dr, San Diego, CA 92127 U.S.A. Telephone Number: 858-942-2230 This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Table of Contents

Precautions. 4 Identifying parts and controls. 5

Setup.7

Step 1: Open the stand. 7 Step 2: Connect the display to your computer. 7 Step 3: Connect the power cord. 8 Step 4: Secure the cords and replace the back cover. 8 Step 5: Turn on the monitor and computer. 9 Adjusting the tilt. 9
Customizing Your Monitor.10
Adjusting to the desired brightness. 10 Navigating the menu. 10 Adjusting the backlight (BACKLIGHT). 11 Adjusting the contrast (CONTRAST). 12 Adjusting the black level of an image (BRIGHTNESS). 12 Adjusting the pictures sharpness and centering (SCREEN). 12 Adjusting the color temperature (COLOR). 13 Changing the gamma setting (GAMMA). 14 Adjusting the sharpness (SHARPNESS). 14 Changing the menus position (MENU POSITION). 14 Selecting the on-screen menu language (LANGUAGE). 15 Additional settings. 15

Macintosh is a trademark licensed to Apple Computer, Inc., registered in the U.S.A. and other countries. Windows and MS-DOS are registered trademarks of Microsoft Corporation in the United States and other countries. IBM PC/AT and VGA are registered trademarks of IBM Corporation of the U.S.A. VESA and DDC are trademarks of the Video Electronics Standards Association. ENERGY STAR is a U.S. registered mark. Adobe and Acrobat are trademarks of Adobe Systems Incorporated. All other product names mentioned herein may be the trademarks or registered trademarks of their respective companies. Furthermore, and are not mentioned in each case in this manual.

Technical Features.16

Power saving function. 16 Reducing the power consumption ( mode). 16 Automatic picture quality adjustment function. 16

Troubleshooting.17

On-screen messages. 17 Trouble symptoms and remedies. 18

Specifications.20

http://www.sony.net/

Precautions

Warning on power connections
Use the supplied power cord. If you use a different power cord, be sure that it is compatible with your local power supply. For the customers in the U.S.A. If you do not use the appropriate cord, this monitor will not conform to mandatory FCC standards. For the customers in the UK If you use the monitor in the UK, be sure to use the appropriate UK power cord.

Example of plug types

Note on the LCD (Liquid Crystal Display)
Please note that the LCD screen is made with highprecision technology. However, black points or bright points of light (red, blue, or green) may appear constantly on the LCD screen, and irregular colored stripes or brightness may appear on the LCD screen. This is not malfunction. (Effective dots: more than 99.99%)

Maintenance

Be sure to unplug the power cord from the power outlet before cleaning your monitor. Clean the LCD screen with a soft cloth. If you use a glass cleaning liquid, do not use any type of cleaner containing an anti-static solution or similar additive as this may scratch the LCD screens coating. Clean the cabinet, panel, and controls with a soft cloth lightly moistened with a mild detergent solution. Do not use any type of abrasive pad, scouring powder, or solvent, such as alcohol or benzine. Do not rub, touch, or tap the surface of the screen with sharp or abrasive items such as a ballpoint pen or screwdriver. This type of contact may result in a scratched picture tube. Note that material deterioration or LCD screen coating degradation may occur if the monitor is exposed to volatile solvents such as insecticide, or if prolonged contact is maintained with rubber or vinyl materials.

for 100 to 120 V AC

for 200 to 240 V AC

for 240 V AC only

The equipment should be installed near an easily accessible outlet.

Installation

Do not install or leave the monitor: In places subject to extreme temperatures, for example near a radiator, heating vent, or in direct sunlight. Subjecting the monitor to extreme temperatures, such as in an automobile parked in direct sunlight or near a heating vent, could cause deformations of the casing or malfunctions. In places subject to mechanical vibration or shock. Near any equipment that generates a strong magnetic field, such as a TV or various other household appliances. In places subject to inordinate amounts of dust, dirt, or sand, for example near an open window or an outdoor exit. If setting up temporarily in an outdoor environment, be sure to take adequate precautions against airborne dust and dirt. Otherwise irreparable malfunctions could occur. Place this unit on a flat surface. Do not place it on an uneven surface like the edge of a desk. If a part of this unit sticks out from such surface, it may fall or cause damaged and injury.

Transportation

Disconnect all cables from the monitor and grasp the monitor firmly with both hands when transporting. If you drop the monitor, you may be injured or the monitor may be damaged. When you transport this monitor for repair or shipment, use the original carton and packing materials.
Installation on a wall or a mounting arm
If you intend to install the display on a wall or a mounting arm, be sure to consult qualified personnel. Note that the back cover must be removed for this type of installation.

Handling the LCD screen

Do not leave the LCD screen facing the sun as it can damage the LCD screen. Take care when you place the monitor by a window. Do not push on or scratch the LCD screen. Do not place a heavy object on the LCD screen. This may cause the screen to lose uniformity or cause LCD panel malfunctions. If the monitor is used in a cold place, a residual image may appear on the screen. This is not a malfunction. The screen returns to normal as the temperature rises to a normal operating level. If a still picture is displayed for a long time, a residual image may appear for a while. The residual image will eventually disappear. The LCD panel becomes warm during operation. This is not a malfunction.

Disposal of the monitor

Do not dispose of this monitor with general household waste. The fluorescent tube used in this monitor contains mercury. Disposal of this monitor must be carried out in accordance to the regulations of your local sanitation authority.
Identifying parts and controls
See the pages in parentheses for further details. The 1 (power) switch and the control buttons are on the lower right part of the front of the monitor.
(Power) switch and indicator (pages 9, 16) To turn the display on or off, press the 1 (power) switch upward. The power indicator lights up in green when the display is turned on, and lights up in orange when the monitor is in power saving mode.

Front of the display

Press upward to turn the display on or off.
2 MENU button (pages 10, 11) This button displays or closes the main menu. 3 m/M buttons (page 11) These buttons function as the m/M buttons when selecting the menu items and making adjustments. 4 OK button (page 11) This button selects the item or executes the settings in the menu. 5 button (page 10) This button is used to change the brightness of the screen.
6 Security Lock Hole The security lock hole should be applied with the Kensington Micro Saver Security System. Micro Saver Security System is a trademark of Kensington.

Rear of the display

7 Back cover (page 8) Remove this cover when you connect/disconnect cables or cords. 8 AC IN connector (page 8) Connect the power cord (supplied). 9 HD15 input connector (analog RGB) (page 7) This connector inputs analog RGB video signals (0.7 Vp-p, positive) and SYNC signals.

Remove the back cover.

Before using your monitor, check that the following items are included in your carton: LCD display Power cord HD15-HD15 video signal cable (analog RGB) Cord strap CD-ROM (utility software for Windows/Macintosh, Operating Instructions, etc.) Warranty card Quick Setup Guide
Connect a computer equipped with an HD15 output connector (analog RGB)
Using the supplied HD15-HD15 video signal cable (analog RGB), connect the computer to the monitors HD15 input connector (analog RGB). Connect the computer according to the following illustrations.

x Connecting to an IBM PC/AT or compatible computer

Step 1: Open the stand

to the HD15 input connector (analog RGB)
to the computers HD15 output connector (analog RGB)
IBM PC/AT or compatible computer Note The stand is folded at the factory. Be sure not to place the display vertically with the stand as it is. Otherwise, the display may topple over.
HD15-HD15 video signal cable (analog RGB) (supplied)
x Connecting to a Macintosh computer
When connecting this monitor to a Macintosh computer, use the Macintosh adapter (not supplied) if necessary. Connect the Macintosh adapter to the computer before connecting the cable.
Step 2: Connect the display to your computer
Turn off the monitor and computer before connecting.
Notes Do not touch the pins of the video signal cable connector as this might bend the pins. Check the alignment of the HD15 connector to prevent bending the pins of the video signal cable connector.
to the computers output connector

Macintosh computer

Step 3: Connect the power cord
With the monitor and computer switched off, first connect the power cord to the monitor, then connect it to a power outlet.
Step 4: Secure the cords and replace the back cover
1 Bundle the cables and cords.
Using the supplied cord strap, bundle the cables and cords.

to AC IN

Cord strap The illustration of the back of the monitor shown here is that of the SDM-HS75. The same applies for the other models.
to a power outlet power cord (supplied)
2 Replace the back cover.
Step 5: Turn on the monitor and computer
1 Press the 1 (power) switch upward.
The 1 (power) indicator of the monitor lights up in green.

Adjusting the tilt

This display can be adjusted within the angles shown below.

Approx. 20

2 Turn on the computer.
The installation of your monitor is complete. If necessary, use the monitors controls to adjust the picture.
Grasp the lower sides of the LCD panel, then adjust screen tilt.

If no picture appears on your screen
Check that the power cord and the video signal cable are properly connected. If NO INPUT SIGNAL appears on the screen: The computer is in the power saving mode. Try pressing any key on the keyboard or moving the mouse. If CABLE DISCONNECTED appears on the screen: Check that the video signal cable is properly connected. If OUT OF RANGE appears on the screen: Reconnect the old monitor. Then adjust the computers graphics board within the following ranges. SDM-HS75 Horizontal frequency Vertical frequency Resolution 2880 kHz 4875 Hz SDM-HSkHz 4875 Hz
To use the display comfortably
This display is designed so that you can set it up at a comfortable viewing angle. Adjust the viewing angle of your display according to the height of the desk and chair, and so that light is not reflected from the screen to your eyes.
Note When adjusting the screen tilt, make sure not to knock or drop the display off the desk.

or less or less

For more information about the on-screen messages, see Trouble symptoms and remedies on page 18.
No need for specific drivers The monitor complies with the DDC Plug & Play standard and automatically detects all the monitors information. No specific driver needs to be installed to the computer. The first time you turn on your computer after connecting the monitor, the setup Wizard may appear on the screen. In this case, follow the on-screen instructions. The Plug & Play monitor is automatically selected so that you can use this monitor. The vertical frequency turns to 60 Hz. Since flickers are unobtrusive on the monitor, you can use it as it is. You do not need to set the vertical frequency to any particular high value.

Customizing Your Monitor

Before making adjustments
Connect the monitor and the computer, and turn them on. Wait for at least 30 minutes before making adjustments for the best result. You can make numerous adjustments to your monitor using the on-screen menu.
1 BACKLIGHT (page 11) Select the BACKLIGHT menu to adjust the brightness of the backlight.

BACKL I GHT

x / 6 0Hz EX I T
Adjusting to the desired brightness
Pressing the button, you can change the brightness of the screen. Each time you press the button, the mode changes as follows. USER t HIGH t MIDDLE t LOW t USER. The brightness of the screen will decrease as the mode setting changes from HIGH to LOW. If you select USER, you can adjust the backlight level by pressing the m/M buttons, the same as when you select BACKLIGHT using the menu.

: USER

2 CONTRAST 6 (page 12) Select the CONTRAST menu to adjust the picture contrast.

CONTRAST

3 BRIGHTNESS 8 (page 12) Select the BRIGHTNESS menu to adjust the picture brightness (black level).

BR I GHTNESS

Only while the mode is set to USER, are the BACKLIGHT, CONTRAST, and BRIGHTNESS items of the menu available (page 11). If you select LOW, the power consumption is reduced (page 16).
4 SCREEN (page 12) Select the SCREEN menu to adjust the pictures sharpness (phase/pitch) or its centering (horizontal/vertical position).
SCREEN AU TO PHASE P I TCH H CENTER V CENTER x / 6 0Hz EX I T

Navigating the menu

Press the MENU button to display the main menu on your screen. See page 11 for more information on using the MENU button.
5 COLOR (page 13) Select the COLOR menu to adjust the color temperature of the picture. This adjusts the tone of the screen. While COLOR is set to sRGB, you cannot adjust CONTRAST, BRIGHTNESS or GAMMA. 6 GAMMA (page 14) Select the GAMMA menu to change the pictures color shade setting.
COLOR 9300K 6500K s RGB USER AD J U S T x / 6 0Hz EX I T
GAMMA GAMMA 1 GAMMA 2 GAMMA 3

0 x / 6 0Hz EX I T

Use the m/M and OK buttons to select the icons in the above main menu illustration. The following 1 to 0 menu appears. Keep pressing m to scroll down until the icons in menu 9 and 0 appear. See page 11 for more information on using the m/M and OK buttons.
7 SHARPNESS (page 14) Select the SHARPNESS menu to adjust to sharpen the edge of images.

S H AR P N E S S

8 MENU POSITION (page 14) Select the MENU POSITION to change the onscreen menu position.

3 Adjust the menu.

MENU POS I T I ON
Press the m/M buttons to make the adjustment, then press the OK button. When you press the OK button, the setting is stored, then the display returns to the previous menu.
(page 15) 9 LANGUAGE Select LANGUAGE to change the language used on menus or messages.
L A N G UAG E ENGL I SH FRANA I S DEUTSCH ESPA OL I TA L I ANO x / 6 0Hz EX I T

4 Close the menu.

Press the MENU button once to return to normal viewing. If no buttons are pressed, the menu closes automatically after about 45 seconds.
0 Other menus (page 15) Set the following menu items. RESET 0 MENU LOCK

RESET OK CANCEL

x Resetting the adjustments
You can reset the adjustments using the RESET menu. See page 15 for more information on resetting the adjustments.

x Using the MENU, m/M, and OK buttons

1 Display the main menu.

Press the MENU button to display the main menu on your screen.
Adjusting the backlight (BACKLIGHT)
If the screen is too bright, adjust the backlight and make the screen easier to see.
Note The backlight cannot be adjusted when the MIDDLE, or LOW (page 10). mode is set to HIGH,

1 Press the MENU button.

The main menu appears on the screen.
2 Select the menu you want to adjust.
Press the m/M buttons to display the desired menu. Press the OK button to select the menu item.
2 Press the m/M buttons to select
(BACKLIGHT) and press the OK button. The BACKLIGHT menu appears on the screen.
3 Press the m/M buttons to adjust the light level and

press the OK button.

Adjusting the contrast (CONTRAST)
Adjust the picture contrast.
Note The contrast cannot be adjusted when the MIDDLE, or LOW (page 10). mode is set to HIGH,
You can manually adjust the pictures sharpness (phase/pitch) and position (horizontal/vertical position). These adjustments are stored in memory and automatically recalled when the display receives the same input signal. These settings may have to be repeated if you change the input signal after reconnecting your computer.
x Make further automatic adjustments to the picture quality for the current input signal (AUTO)
2 Press the m/M buttons to select 6 (CONTRAST) and
press the OK button. The CONTRAST menu appears on the screen.
press the OK button. The SCREEN menu appears on the screen.

(SCREEN) and

3 Press the m/M buttons to adjust the contrast and
Adjusting the black level of an image (BRIGHTNESS)
Adjust the picture brightness (black level).
Note The brightness cannot be adjusted when the MIDDLE, or LOW (page 10). mode is set to HIGH,
3 Press the m/M buttons to select AUTO and press
the OK button. Make the appropriate adjustments of the screens phase, pitch and horizontal/vertical position for the current input signal and store them.
4 Press the m/M buttons to select
OK button. Return to the menu screen.

and press the

x Adjust the pictures sharpness manually (PHASE/PITCH)
You can adjust the pictures sharpness as follows.

2 Press the m/M buttons to select 8 (BRIGHTNESS)
and press the OK button. The BRIGHTNESS menu appears on the screen.
1 Set the resolution to on the computer. 2 Load the CD-ROM. 3 Start the CD-ROM, select the region and model, and
display the test pattern. For Windows Click [Utility] t [Windows]/[Win Utility.exe]. For Macintosh Click [Utility] t [Mac]/[Mac Utility].
3 Press the m/M buttons to adjust the brightness and
Adjusting the pictures sharpness and centering (SCREEN)
x Automatic picture quality adjustment function
When the monitor receives an input signal, it automatically adjusts the pictures position and sharpness (phase/pitch), and ensures that a clear picture appears on the screen (page 16).
Note While the automatic picture quality adjustment function is activated, only the 1 (power) switch will operate.

4 Press the MENU button.

5 Press the m/M buttons to select
6 Press the m/M buttons to select PHASE and press
the OK button. The PHASE menu appears on the screen.
If the automatic picture quality adjustment function of this monitor seems to not completely adjust the picture You can make further automatic adjustment of the picture quality for the current input signal. (See AUTO below.) If you still need to make further adjustments to the picture quality
7 Press the m/M buttons until the horizontal stripes

are at a minimum.

Adjust so that the horizontal stripes are at a minimum.
6 Press the m/M buttons to select H CENTER or V
CENTER and press the OK button. The H CENTER or V CENTER menu appears on the screen.
7 Press the m/M buttons to center the test pattern in 8 Press the OK button.
Return to the SCREEN menu. If vertical stripes are observed over the entire screen, adjust pitch by the following steps. the screen.
8 Click [END] on the screen to turn off the test pattern. 9 Press the OK button.
Return to the SCREEN menu.

9 Press the m/M buttons to select PITCH and press
the OK button. The PITCH menu appears on the screen.
10 Press the m/M buttons to select
10 Press the m/M buttons until the vertical stripes
disappear. Adjust so that the vertical stripes disappear.
Adjusting the color temperature (COLOR)
You can select the color level of the pictures white color field from the default color temperature settings. Also, if necessary, you can fine tune the color temperature. You can set the desired color temperature for each mode of the brightness of screen.
11 Click [END] on the screen to turn off the test pattern. 12 Press the OK button.
and press the press the OK button. The COLOR menu appears on the screen.

(COLOR) and

13 Press the m/M buttons to select
3 Press the m/M buttons to select the desired color
temperature and press the OK button. Whites will change from a bluish hue to reddish hue as the temperature is lowered from 9300K (default setting) to 6500K. While USER is selected for the brightness of screen, you can set the color temperature to sRGB. When you select sRGB, the colors adjust to the sRGB profile. (The sRGB color setting is an industry-standard color space protocol designed for computer products.) If you select sRGB, the color settings of your computer must be set to the sRGB profile.
Notes If a connected computer or other equipment is not sRGB-compliant, color cannot be adjusted to the sRGB profile. While COLOR is set to sRGB, you cannot adjust CONTRAST, BRIGHTNESS or GAMMA.
x Adjust the pictures position manually (H CENTER/V CENTER)
If the picture is not in the center of the screen, adjust the pictures centering as follows.
Fine tuning the color temperature (USER ADJUSTMENT)
USER R G B A D J U S T MENT 128
Changing the menus position (MENU POSITION)
You can change the menu position if it is blocking an image on the screen.
1 Press the m/M buttons to select ADJUST and press
the OK button. The USER ADJUSTMENT menu appears on the screen.
(MENU POSITION) and press the OK button. The MENU POSITION menu appears on the screen.
2 Press the m/M buttons to select R (Red) or B (Blue)
and press the OK button. Then press the m/M buttons to adjust the color temperature and press the OK button. Since this adjustment changes the color temperature by increasing or decreasing the R and B components with respect to G (green), the G component is fixed.

Automatic picture quality adjustment function
When the monitor receives an input signal, it automatically adjusts the pictures position and sharpness (phase/pitch), and ensures that a clear picture appears on the screen. The factory preset mode
When the monitor receives an input signal, it automatically matches the signal to one of the factory preset modes stored in the monitors memory to provide a high quality picture at the center of the screen. If the input signal matches the factory preset mode, the picture appears on the screen automatically with the appropriate default adjustments.

SDM-HS75

Power mode normal operation active off* (deep sleep)** power off Power consumption 45 W (max.) 1.0 W (max.) 1.0 W (max.)

1 (power) indicator

green orange off
If input signals do not match one of the factory preset modes
When the monitor receives an input signal that does not match one of the factory preset modes, the automatic picture quality adjustment function of this monitor is activated to ensure that a clear picture always appears on the screen (within the following monitor frequency ranges): Horizontal frequency: 2880 kHz Vertical frequency: 4875 Hz Consequently, the first time the monitor receives input signals that do not match one of the factory preset modes, the monitor may take a longer time than normal to display the picture on the screen. This adjustment data is automatically stored in memory so that next time, the monitor will function in the same way as when the monitor receives the signals that match one of the factory preset modes.

SDM-HS95

Power mode normal operation active off* (deep sleep)** power off
Power consumption 50 W (max.) 1.0 W (max.) 1.0 W (max.)
When your computer enters the active off mode, the input signal is cut and NO INPUT SIGNAL appears on the screen. After 5 seconds, the monitor enters the power saving mode. ** deep sleep is the power saving mode defined by the Environmental Protection Agency.
If you adjust the phase, pitch, and picture position manually
For some input signals, the automatic picture quality adjustment function of this monitor may not completely adjust the picture position, phase, and pitch. In this case, you can set these adjustments manually (page 12). If you set these adjustments manually, they are stored in memory as user modes and automatically recalled whenever the monitor receives the same input signals.

If NO INPUT SIGNAL appears on the screen, or the 1 (power) indicator is orange,
If OUT OF RANGE appears on the screen,
x Problems caused by a computer or other equipment connected, and not caused by the monitor Check that the video frequency range is within that specified for the monitor. If you replaced an old monitor with this monitor, reconnect the old monitor and adjust the computers graphics board within the following ranges: Horizontal: 2880 kHz Vertical: 4875 Hz Resolution: or less If you replaced an old monitor with this monitor, reconnect the old monitor and do the following. Select SONY from the Manufacturers list and select SDM-HS75 or SDM-HS95 from the Models list in the Windows device selection screen. If the model name of this monitor does not appear in the Models list, try Plug & Play. If you use the Macintosh adapter (not supplied), check that the Macintosh adapter and the video signal cable are properly connected (page 7). Adjust the pitch and phase (page 12). Try plugging the monitor into a different AC outlet, preferably on a different circuit. x Problems caused by a computer or other equipment connected, and not caused by the monitor Check your graphics board manual for the proper monitor setting. Confirm that the graphics mode (VESA, Macintosh 19" Color, etc.) and the frequency of the input signal are supported by this monitor. Even if the frequency is within the proper range, some graphics boards may have a sync pulse that is too narrow for the monitor to sync correctly. Adjust the computers refresh rate (vertical frequency) to obtain the best possible picture.
If you are using Windows and replaced an old monitor with this monitor, If using a Macintosh system, Picture flickers, bounces, oscillates, or is scrambled

Symptom Picture is fuzzy

Check these items Adjust the brightness and contrast (page 12). Adjust the pitch and phase (page 12). x Problems caused by a computer or other equipment connected, and not caused by the monitor Set the resolution to on your computer.
Picture is ghosting Picture is not centered or sized properly Picture is too small
Eliminate the use of video cable extensions and/or video switch boxes. Check that all plugs are firmly seated in their sockets. Adjust the pitch and phase (page 12). Adjust the picture position (page 13). Note that some video modes do not fill the screen to the edges. x Problems caused by a computer or other equipment connected, and not caused by the monitor Set the resolution to on your computer. Adjust the brightness using the BRIGHTNESS menu (page 12). Adjust the backlight (page 11). Adjust the brightness using the button (page 10). It takes a few minutes for the display to become bright after turning on the monitor.

Panel type: a-Si TFT Active Matrix Picture size: 19.0 inch Input signal format RGB operating frequency* Horizontal: 2880 kHz Vertical: 4875 Hz Resolution Horizontal: Max.1280 dots Vertical: Max.1024 lines Input signal levels Analog RGB video signal 0.7 Vp-p, 75 , positive SYNC signal TTL level, 2.2 k, positive or negative (Separate horizontal and vertical) Power requirements 100240 V, 5060 Hz, Max. 1.0 A Power consumption Max. 50 W Operating temperature 535 C Dimensions (width/height/depth) Display (upright): Approx. 146 mm (17 1/1/3/4 inches) Mass Approx. 6 kg (13 lb. 3 5/8 oz.) Plug & Play DDC2B Accessories See page 7. * Recommended horizontal and vertical timing condition Horizontal sync width duty should be more than 4.8% of total horizontal time or 0.8 s, whichever is larger. Horizontal blanking width should be more than 2.5 sec. Vertical blanking width should be more than 450 sec. Design and specifications are subject to change without notice. LCD panel

 

Tags

Galaxy S LE40B650 FOR MAC LXT303 Kawai CN3 Seiko V657 DI-713P Nikon 300 DVD-7942N Recorder Driver Calibre 36 CDX-MP70 563LS-lb563b-ea- Sharp GX17 HT-BD2t XAA TE-8000F H4D40 GGR50B KX-TG1061 TPS II LA40A550p1F Basscube 8S ZFC18 8K GT-12000 EFW 6305 Nissan Cube TR441 Solo NEO FE-10 14PT1562 Nikon EM 47LG60 BH-803 Victa 700 Gt KX-TSC11B MG-605A 2 2 1850HD IC-F4162S S1710 3GS LUE02-90-S DI-524 MPX-808 Emachines E510 TM-J7100 Classic 100 System Cyber-shot C510 C28WF560N UP-3301 DC-390 AR 1005 DV387 CL21F60S OFX 9100 46C5000 CDP-XE700 MA-1350-1 Xguitar VSX-AX2as-S MP-C7085 SF 110T VGN-AR61E V-xpanded DCR-TRV11 EK5143 12K-CHA B2030A FS 480 STR-DE895 GA-M51gm-s2G Frontman 212R Motorola E8 Z19LCD3 KV-21FT1E DAV-X1 LA26R71B SAT M6 Vivicam 5385 ZDI311X DTT2500D Possession WG121 EST0002 Easyshare C195 NX7200 GX-4000DB AVA-1209A CDX-3002 BM 3985 Gigaset C2 USR9003 C2030 P5P800-VM P-2602HW-61C LE40B650t2W CDE-9841R IQ820

 

manuel d'instructions, Guide de l'utilisateur | Manual de instrucciones, Instrucciones de uso | Bedienungsanleitung, Bedienungsanleitung | Manual de Instruções, guia do usuário | инструкция | návod na použitie, Užívateľská príručka, návod k použití | bruksanvisningen | instrukcja, podręcznik użytkownika | kullanım kılavuzu, Kullanım | kézikönyv, használati útmutató | manuale di istruzioni, istruzioni d'uso | handleiding, gebruikershandleiding

 

Sitemap

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101