User Manual

EUROLIVE F1220A
High-Performance, Active 125-Watt Monitor Speaker System with 12" Woofer, 1" Compression Driver and Feedback Filter

behringer.com

EUROLIVE F1220A User Manual

Table of Contents

Thank you.. 2 Important Safety Instructions.. 3 Legal Disclaimer.. 3 Limited Warranty.. 3 1. Before you get started.. 5 1.1 Shipment... 5 1.2 Online Registration... 5 2. Control elements and connections.. 6 2.1 Top panel... 6 2.2 Side panel... 6 3. Operation... 7 3.1 Connecting signal sources.. 7 3.2 Connecting multiple F1220A speakers. 7 3.3 Using F1220A as keyboard amplifier.. 7 3.4 Notch filter.... 7 4. Audio connectors.. 8 5. Specifications.. 8

Thank you

Thank you very much for expressing your confidence in BEHRINGER products by purchasing the EUROLIVE F1220A floor monitor system. With its comprehensive features and first-grade speakers, the active EUROLIVE F1220A floor monitor system provides the perfect solution for live and playback applications on small- and middle-sized stages. The input section allows you to connect either to a Line source or microphone. There is an adjustable feedback filter and an integrated limiter for ultimate system control and speaker protection plus a dedicated 3-band EQ for perfect sound shaping.
Important Safety Instructions
Terminals marked with this symbol carry electrical current of sufficient magnitude to constitute risk of electric shock. Use only high-quality commercially-available speaker cables with 1/4" TS plugs pre-installed. All other installation or modification should be performed only by qualified personnel. This symbol, wherever it appears, alerts you to the presence of uninsulated dangerous voltage inside the enclosure - voltage that may be sufficient to constitute a risk of shock. This symbol, wherever it appears, alerts you to important operating and maintenance instructions in the accompanying literature. Please read the manual. Caution To reduce the risk of electric shock, do not remove the top cover (or the rear section). No user serviceable parts inside. Refer servicing to qualified personnel. Caution To reduce the risk of fire or electric shock, do not expose this appliance to rain and moisture. The apparatus shall not be exposed to dripping or splashing liquids and no objects filled with liquids, such as vases, shall be placed on the apparatus. Caution These service instructions are for use by qualified service personnel only. To reduce the risk of electric shock do not perform any servicing other than that contained in the operation instructions. Repairs have to be performed by qualified service personnel. 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with dry cloth. 7. Do not block any ventilation openings. Install in accordance with the manufacturers instructions. 8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding-type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. 10. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. 11. Use only attachments/accessories specified by the manufacturer. 12. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over. 13. Unplug this apparatus during lightning storms or when unused for long periods of time. 14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. 15. The apparatus shall be connected to a MAINS socket outlet with a protective earthing connection. 16. Where the MAINS plug or an appliance coupler is used as the disconnect device, the disconnect device shall remain readily operable.

Limited Warranty

1 Warranty
[1] This limited warranty is valid only if you purchased the product from a BEHRINGER authorized dealer in the country of purchase. A list of authorized dealers can be found on BEHRINGERs website behringer.com under Where to Buy, or you can contact the BEHRINGER office closest to you. [2] MUSIC Group* warrants the mechanical and electronic components of this product to be free of defects in material and workmanship if used under normal operating conditions for a period of one (1) year from the original date of purchase (see the Limited Warranty terms in 4 below), unless a longer minimum warranty period is mandated by applicable local laws. If the product shows any defects within the specified warranty period and that defect is not excluded under 4, MUSIC Group shall, at its discretion, either replace or repair the product using suitable new or reconditioned product or parts. In case MUSIC Group decides to replace the entire product, this limited warranty shall apply to the replacement product for the remaining initial warranty period, i.e., one (1) year (or otherwise applicable minimum warranty period) from the date of purchase of the original product. [3] Upon validation of the warranty claim, the repaired or replacement product will be returned to the user freight prepaid by MUSIC Group. [4] Warranty claims other than those indicated above are expressly excluded. PLEASE RETAIN YOUR SALES RECEIPT. IT IS YOUR PROOF OF PURCHASE COVERING YOUR LIMITED WARRANTY. THIS LIMITED WARRANTY IS VOID WITHOUT SUCH PROOF OF PURCHASE.
2 Online registration Please do remember to register your new BEHRINGER equipment right after your purchase at behringer.com under Support and kindly read the terms and conditions of our limited warranty carefully. Registering your purchase and equipment with us helps us process your repair claims quicker and more efficiently. Thank you for your cooperation! 3 Return materials authorization
[1] To obtain warranty service, please contact the retailer from whom the equipment was purchased. Should your BEHRINGER dealer not be located in your vicinity, you may contact the BEHRINGER distributor for your country listed under Support at behringer.com. If your country is not listed, please check if your problem can be dealt with by our Online Support which may also be found under Support at behringer.com. Alternatively, please submit an online warranty claim at behringer.com BEFORE returning the product. All inquiries must be accompanied by a description of the problem and the serial number of the product. After verifying the products warranty eligibility with the original sales receipt, MUSIC Group will then issue a Return Materials Authorization (RMA) number.

Legal Disclaimer

Technical specifications and appearance are subject to change without notice. The information contained herein is correct at the time of printing. All trademarks are the property of their respective owners. MUSIC Group accepts no liability for any loss which may be suffered by any person who relies either wholly or in part upon any description, photograph or statement contained herein. Colors and specifications may vary slightly from product. BEHRINGER products are sold through authorized dealers only. Distributors and dealers are not agents of MUSIC Group and have absolutely no authority to bind MUSIC Group by any express or implied undertaking or representation. This manual is copyrighted. No part of this manual may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording of any kind, for any purpose, without the express written permission of Red Chip Company Ltd. ALL RIGHTS RESERVED. 2010 Red Chip Company Ltd. Trident Chambers, Wickhams Cay, P.O. Box 146, Road Town, Tortola, British Virgin Islands
[2] Subsequently, the product must be returned in its original shipping carton, together with the return authorization number to the address indicated by MUSIC Group. [3] Shipments without freight prepaid will not be accepted.
4 Warranty Exclusions [1] This limited warranty does not cover consumable parts including, but not limited to, fuses and batteries. Where applicable, MUSIC Group warrants the valves or meters contained in the product to be free from defects in material and workmanship for a period of ninety (90) days from date of purchase. [2] This limited warranty does not cover the product if it has been electronically or mechanically modified in any way. If the product needs to be modified or adapted in order to comply with applicable technical or safety standards on a national or local level, in any country which is not the country for which the product was originally developed and manufactured, this modification/adaptation shall not be considered a defect in materials or workmanship. This limited warranty does not cover any such modification/adaptation, regardless of whether it was carried out properly or not. Under the terms of this limited warranty, MUSIC Group shall not be held responsible for any cost resulting from such a modification/adaptation. [3] This limited warranty covers only the product hardware. It does not cover technical assistance for hardware or software usage and it does not cover any software products whether or not contained in the product. Any such software is provided AS IS unless expressly provided for in any enclosed software limited warranty. [4] This limited warranty is invalid if the factoryapplied serial number has been altered or removed from the product. [5] Free inspections and maintenance/repair work are expressly excluded from this limited warranty, in particular, if caused by improper handling of the product by the user. This also applies to defects caused by normal wear and tear, in particular, of faders, crossfaders, potentiometers, keys/buttons, guitar strings, illuminants and similar parts. [6] Damage/defects caused by the following conditions are not covered by this limited warranty: improper handling, neglect or failure to operate the unit in compliance with the instructions given in BEHRINGER user or service manuals; connection or operation of the unit in any way that does not comply with the technical or safety regulations applicable in the country where the product is used; damage/defects caused by acts of God/Nature (accident, fire, flood, etc) or any other condition that is beyond the control of MUSIC Group.

[7] Any repair or opening of the unit carried out by unauthorized personnel (user included) will void the limited warranty. [8] If an inspection of the product by MUSIC Group shows that the defect in question is not covered by the limited warranty, the inspection costs are payable by the customer. [9] Products which do not meet the terms of this limited warranty will be repaired exclusively at the buyers expense. MUSIC Group or its authorized service center will inform the buyer of any such circumstance. If the buyer fails to submit a written repair order within 6 weeks after notification, MUSIC Group will return the unit C.O.D. with a separate invoice for freight and packing. Such costs will also be invoiced separately when the buyer has sent in a written repair order. [10] Authorized BEHRINGER dealers do not sell new products directly in online auctions. Purchases made through an online auction are on a buyer beware basis. Online auction confirmations or sales receipts are not accepted for warranty verification and MUSIC Group will not repair or replace any product purchased through an online auction.

9 Amendment

Warranty service conditions are subject to change without notice. For the latest warranty terms and conditions and additional information regarding MUSIC Groups limited warranty, please see complete details online at behringer.com.
* MUSIC Group Macao Commercial Oshore Limited of Rue de Pequim No. 202-A, Macau Finance Centre 9/J, Macau, including all MUSIC Group companies
5 Warranty transferability This limited warranty is extended exclusively to the original buyer (customer of authorized retail dealer) and is not transferable to anyone who may subsequently purchase this product. No other person (retail dealer, etc.) shall be entitled to give any warranty promise on behalf of MUSIC Group. 6 Claim for damage
Subject only to the operation of mandatory applicable local laws, MUSIC Group shall have no liability to the buyer under this warranty for any consequential or indirect loss or damage of any kind. In no event shall the liability of MUSIC Group under this limited warranty exceed the invoiced value of the product.
7 Limitation of liability This limited warranty is the complete and exclusive warranty between you and MUSIC Group. It supersedes all other written or oral communications related to this product. MUSIC Group provides no other warranties for this product. 8 Other warranty rights and national law [1] This limited warranty does not exclude or limit the buyers statutory rights as a consumer in any way. [2] The limited warranty regulations mentioned herein are applicable unless they constitute an infringement of applicable mandatory local laws. [3] This warranty does not detract from the sellers obligations in regard to any lack of conformity of the product and any hidden defect.

1. Before You Get Started

1.1 Shipment

Your product was carefully packed at the factory to ensure safe transport. Nevertheless, if the box is damaged inspect the unit immediately for signs of damage.
If the unit is damaged please do NOT return it to us, but notify your

1.3 Online Registration

Please register your new BEHRINGER equipment right after your purchase by visiting http://behringer.com and read the terms and conditions of our warranty carefully. Should your BEHRINGER product malfunction, it is our intention to have it repaired as quickly as possible. To arrange for warranty service, please contact the BEHRINGER retailer from whom the equipment was purchased. Shouldyour BEHRINGER dealer not be located in your vicinity, you may directly contact one of our subsidiaries. Corresponding contact information is included in the original equipment packaging (Global Contact Information/European Contact Information). Should your country not be listed, please contact the distributor nearest you. A list of distributors can be found in the support area of our website(http://behringer.com). Registering your purchase and equipment with us helps us process your repair claims more quickly and efficiently. Thank you for your cooperation!
dealer and the shipping company immediately; otherwise, claims for damage or replacement may not be granted.
Always use the original box to prevent damage during storage

ortransport.

Make sure that children cannot play unsupervised with the unit or

itspackaging.

Please ensure proper disposal of all packing materials.

1.2 Initial operation

Ensure adequate air supply and to avoid overheating do not place the unit near radiators etc.
2. Control Elements and Connections

2.1 Top panel

Caution
Before you change the fuse, switch off the device and pull the plug to
avoid electric shock or damage to the device.
Blown fuses must be replaced by fuses of the correct rating!

Pleaserefer to the Specifications section for the applicable rating. The fuse holder on the mains connector has 3 triangular markings. Two of these triangles opposing each other. The device is set to the operating voltage printed next to these markers and can be set to another voltage by turning the fuse holder by 180. For connection to the mains use the enclosed power cord with cold connector which complies with the relevant safety regulations.
Please make sure that all devices are properly grounded. For your own
Fig. 2.1: First group control

[1] [2] [3]

[1] The POWER LED lights up when the loudspeaker is put into operation. [2] The CLIP LED lights up when signal distortion occurs. Reduce the volume with the LEVEL control until the CLIP LED [2] does not light up any more, oroccasionally lights up at signal peaks. [3] To set the volume of the LINE or MIC signal, use the LEVEL control. The left half of the control range is for attenuating the LINE signal. The right half is for raising the level of the MIC signal.
Level adjusting: Turn the LEVEL control whose signal you want to adjust slowly to the right until the CLIP LED lights up only at signal peaks. The LED is not supposed to glow continuously.
We would like to draw your attention to the fact that extremely loud
safety, never remove or disable the ground conductors from the devices or on the power cords. The unit must always be connected to the mains outlet with a protective grounding connection.
This loudspeaker is capable of producing extreme volumes. Please keep
in mind that high sound pressures do not only temporarily damage your sense of hearing, but can also cause permanent hearing damage. Be careful to select a suitable volume at all times.
sound levels may damage your hearing as well as your headphones/ loudspeakers. Turn the LEVEL control fully to the left before you switch on the unit. Be careful to select a suitable volume at all times.
Important notes concerning installation
The sound quality may diminish within the range of powerful
broadcasting stations and high-frequency sources. Increase the distance between the transmitter and the device and use shielded cables for all connections.
[7] + [{8}] The LINK OUTPUT is directly connected to the inputs of the F1220Aand carries the input signal with no processing applied. In this way, you can route the signal to the input of another device (for example, a second F1220A).

[9] [10]

Fig. 2.2: Equalizer

Fig. 2.5: MIC/LINE INPUT

[4] The F1220A features a 3-band sound control. Each band provides a maximum boost/cut of 15dB. At center position the equalizer has a flat response.
The upper (EQ HIGH) and the lower band (EQ LOW) are shelving filters that boost and cut all frequencies above and below the crossover frequency. Thecrossover frequencies of the upper and lower bands are at 12kHz and 80Hz, respectively. The mid band (EQ MID) is a peak filter the center frequency of which is at 2.5kHz.
[9] Use this 1/4" stereo jack to connect a signal source that has 1/4" output. [10] Use this XLR connector to connect a signal source that has XLR output.
Always use either the XLR or the 1/4" jack input, and use the LEVEL
control to adapt the input sensitivity. Never use both inputs at the same time!

2.2 Side panel

[5] [6]

[14] [11]

Fig. 2.3: Feedback filter (notch filter)
Feedback may occur at high volume levels or under difficult stage situations. Usethe FEEDBACK FILTER function ({[5]}, {[6]} ) to reduce feedback. To learn more about the feedback filter, read section3.4 Notch filter.

[12] [13]

[5] This switch turns on the feedback filter. [6] This control adjusts the center frequency of the feedback filter.
Fig. 2.6: Side panel F1220A
[11] Press POWER to turn on your F1220A.

[7] [8]

The POWER switch does not fully disconnect the unit from the mains.
To disconnect the unit from the mains, pull out the main cable plug or appliance coupler. When installing the product, ensure the plug or appliance coupler is readily operable. Unplug the power cord completely when the unit is not used for prolonged periods of time.

Fig. 2.4: LINK OUTPUT

[12] You can replace fuses at the FUSE SWITCH of the F1220A. Always replace fuses with the same type. Please follow the instructions given in the chapter Specifications. [13] The mains connection is established using a cable with an IEC mains connector. This cable is delivered with the F1220A. To avoid ground-loop hum, loudspeakers and mixing consoles should be connected to the same power circuit. [14] Serial number.

3. Operation

Use the Monitor/Aux output of a mixer to route the audio signal to the F1220A. When using the monitor mix with more loudspeakers, route the audio signal of the first F1220A to the next speaker via the LINK output. The volume level of each F1220A is adjusted with the respective LEVEL control.
Connecting a signal source
Turn the LEVEL control fully to the left. Connect the signal source to the MIC/LINE input. Turn on the F1220A. Turn the LEVEL control slowly to the right until you have reached the desired
3.1 Connecting signal sources
With an F1220A and a microphone, you are able to master small PA tasks with minimum effort. The F1220A can also be used with equipment which include LINE outputs, such as keyboards, playback devices (for example, CD players) andmixers with AUX Send outputs.
volume level. The CLIP LED helps you in this case. The LED should only light up at signal peaks, but shouldnt glow continuously.
Caution: risk of feedback!
Dont let the microphones most sensitive side (front) face the
loudspeaker. Make sure to keep sufficient distance between the microphone and the loudspeaker when using the F1220A.
IN Parallel Out Keyboard 1 DI400P (DI Box)

(balanced signal)

(balanced signal) AUX SEND INPUT 3

INPUT 1 INPUT 2

LINE INPUT OUTPUT MX400 (Submixer) F1220A Main Mixer
Parallel Out IN Keyboard 2 (balanced signal) DI400P (DI Box)
Fig. 3.1: F1220A with two keyboards
3.2 Connecting multiple F1220A speakers
If you want to use the same monitor mix on bigger stages, simply increase the number of stage monitors. For example, connect two F1220A monitors via the LINK output. Either a microphone or line signal can be routed to the first F1220A. Connecting to an active loudspeaker
Connect the LINK output of the first loudspeaker with the LINE input of the

3.4 Notch filter

A notch filter cancels a narrow frequency band of the signal being used. Typicalinterferences, such as feedback and rumble, are found close to the signaland are therefore easily filtered out. To pinpoint the interfering frequency, activate the filter and slowly turn the FREQUENCY control from the left to the right.

We recommend using our proven FEEDBACK DESTROYER PRO FBQ2496

second loudspeaker.

3.3 Using F1220A as keyboard amplifier
Usually guitar and bass guitar players have amplifiers which allow them to be heard when playing on stageeven when a monitor system is being used. These amps have enough power to be used on smaller stages. However, its quite a different matter for the keyboardists because they normally wont use instrument amplifiers. It is possible to connect a keyboard directly to the F1220A. In case you want to hook up two keyboards, use a submixer, such as the MicroMIX MX400, to join both signals and then connect the mixers output to the LINE input of the F1220A. Route the Aux/Monitor signal coming from the main mixer to the submixer so that you can hear your band members as well (see fig.3.1).
feedback suppressor for signals with line level should continuous feedback problems occur. For line- or microphone-level signals, werecommend our SHARK DSP110 signal processor.

4. Audio Connectors

Both audio inputs of the BEHRINGER F1220A and the LINK OUTPUT connector are fully balanced. To maximize interference compensation, try to establish balanced connections to other equipment, whenever possible.

5. Specifications

Output Power

RMS @ 1% THD Peak power

90 W / W / 8
Balanced " TRS connector
strain relief clamp sleeve ring tip
XLR connector (servo-balanced) Sensitivity Input impedance " TRS jack (servo-balanced) Sensitivity -50 dBu to +10 dBu 11 k balanced; 30 k unbalanced Input impedance

Link Output

-50 dBu to +10 dBu 11 k balanced; 30 k unbalanced

sleeve ground/shield

ring cold (-ve) tip hot (+ve)
For connection of balanced and unbalanced plugs, ring and sleeve have to be bridged at the stereo plug.

XLR connector

Loudspeaker System Data
Frequency response Limiter

Equalizer

60 Hz to 18 kHz (-10 dB) optical
Maximum sound pressure level 121 dB @ 1 m
Fig. 4.1: " TRS connector
Balanced use with XLR connectors
80 Hz / 15 dB 2.5 kHz / 15 dB 12 kHz / 15 dB

MID HIGH

Feedback Filter
Filter frequency Level reduction

Power Supply

300 Hz to 6 kHz max. 15 dB
1 = ground/shield 2 = hot (+ve) 3 = cold (-ve)
Power consumption Mains voltage / Fuse 100 - 120 V~ (50/60 Hz) 220 - 230 V~ (50/60 Hz) Mains connector

Physical/Weight

max. 180 W T 2.5 A H 250 V T 1.25 A H 250 V standard IEC receptacle

output

For unbalanced use, pin 1 and pin 3 have to be bridged

Fig. 4.2: XLR connectors

Dimensions (H x W x D) Weight
Make sure that only competent people install your F1220A. They must
approx. 14.2 x 22.8 x 16" approx. 360 x 580 x 406 mm approx. 39.7 lbs / approx. 18 kg
be sufficiently earthed during and after the installation process. Otherwise, electrostatic discharges may negatively affect the operating characteristics of your equipment.
BEHRINGER is constantly striving to maintain the highest professional standards. As a result of these efforts, modifications may be made from time to time to existing products without prior notice. Specifications and appearance may differ from those listed or illustrated.

B212A/B215A

User Manual

A50-19713-00005

EUROLIVE

EUROLIVE B212A/B215A

Important Safety Instructions
14) Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.
This symbol, wherever it appears, alerts you to the presence of uninsulated dangerous voltage inside the enclosure - voltage that may be sufficient to constitute a risk of shock. This symbol, wherever it appears, alerts you to important operating and maintenance instructions in the accompanying literature. Please read the manual.
15) Unplug this apparatus during lightning storms or when unused for long periods of time. 16) Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

Caution

++ To reduce the risk of electric shock, do not remove the top cover (or the rear section). No user serviceable parts inside. Refer servicing to qualified personnel.
++ To reduce the risk of fire or electric shock, do not expose this appliance to rain and moisture. The apparatus shall not be exposed to dripping or splashing liquids and no objects filled with liquids, such as vases, shall be placed on the apparatus.
++ These service instructions are for use by qualified service personnel only. To reduce the risk of electric shock do not perform any servicing other than that contained in the operation instructions. Repairs have to be performed by qualified service personnel. 1) 2) 3) 4) 5) 6) 7) 8) Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Do not use this apparatus near water. Clean only with dry cloth. Do not block any ventilation openings. Install in accordance with the manufacturers instructions. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding-type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
10) Place the power cord so that it is protected from being walked on and sharp edges. Be sure that the power cord is protected particularly at plugs, convenience receptacles and the point where it exits from the apparatus. 11) The apparatus shall be connected to a MAINS socket outlet with a protective earthing connection. 12) Where the MAINS plug or an appliance coupler is used as the disconnect device, the disconnect device shall remain readily operable. 13) Use only attachments/accessories specified by the manufacturer.

Processor-Controlled 400-Watt 2-Way PA Speaker System with 12''/15'' Woofer and1.35''AluminumCompressionDriver
== High-power 400-Watt 2-Way PA sound reinforcement speaker system for live and playback applications
== Ultra-compact lightweight system delivers excellent sound even at extreme sound pressure levels == Integrated sound processor for ultimate system control and speaker protection
== Extremely powerful 12''/15'' long-excursion driver provides incredibly deep bass and acoustic power == State-of-the-art 1.35'' aluminum-diaphragm compression driver for exceptional high-frequency reproduction == Ultra-wide dispersion, large-format exponential/conical horn == Ultra low-noise Mic/Line Input with Volume control and Clip LED == Dedicated 2-band EQ for perfect sound adjustment == Additional Line output connector allows linking of additional speaker systems == Versatile trapezoidal enclosure design allows different positioning: -- Stand mounting with 35-mm pole socket -- Tilts on its side for use as a floor monitor == Ergonomically shaped handles for easy carrying and setup == High-quality components and exceptionally rugged construction ensure long life == Conceived and designed by BEHRINGER Germany

Foreword

Dear Customer, welcome to the team of EUROLIVE users, and thank you very much for expressing your confidence in us by purchasing these PA loudspeakers. Writing this foreword for you gives me great pleasure, because it represents the culmination of many months of hard work delivered by our engineering team to achieve a very ambitious goal: to develop an outstanding PA system that offers a maximum in flexibility and performance through its impressive sound character and outstanding features. The task of designing our new B212A/B215A certainly meant a great deal of responsibility, which we assumed by focusing on you, the discerning user and musician. Meeting your expectations also meant a lot of work and night shifts. But it was fun, too. Developing a product usually brings a lot of people together, and what a great feeling it is when all who participated in such a project can be proud of what theyve achieved. It is our philosophy to share our enjoyment with you, because you are the most important member of the BEHRINGER team. With your highly competent suggestions for new products youve made a significant contribution to shaping our company and making it successful. In return, we guarantee you uncompromising quality as well as excellent technical and audio properties at an extremely reasonable price. All of this will enable you to give free rein to your creativity without being hampered by budget constraints. We are often asked how we manage to produce such high-quality devices at such unbelievably low prices. The answer is quite simple: its you, our customers! Many satisfied customers mean large sales volumes enabling us to get better purchasing terms for components, etc. Isnt it only fair to pass this benefit on to you? Because we know that your success is our success too! I would like to thank all of you who have made the B212A/B215A possible. You have all made your own personal contributions, from the developers to the many other employees at this company, and to you, the BEHRINGER user. My friends, its been worth the effort! Thank you very much,

Table of contents

1. Introduction... 5. 1.1 Before you get started.. 5. 1.1.1 Shipment... 5. 1.1.2 Initial operation.. 5 1.1.3 Online Registration... 5 2. Control elements and connections.. 5. 3. Application examples... 6. 3.1 Using a mixing console.. 6 3.2 Using several B212A/B215A loudspeakers. 6 3.3 Direct connection of a stereo signal source. 6 4. Installation... 7 5. Specifications... 7 6. Warranty... 8

Uli Behringer

1. Introduction
Thank you very much for expressing your confidence in BEHRINGER products by purchasing the EUROLIVE B212A/ B215A. This active and extremely compact loudspeaker has been designed specifically for those applications in which space is a problem. The compact dimensions and the low weight, despite the high-performance power amp, as well as the option to mount the loudspeaker on a wall give this product maximum flexibility. The input section accepts both line-level or microphone-level sources. Additionally, the loudspeaker has a 2-band equalizer for accurate high and low-frequency control. All of these features make this loudspeaker a high-quality and highly reliable companion on the road. whom the equipment was purchased. Should your BEHRINGER dealer not be located in your vicinity, you may directly contact one of our subsidiaries. Corresponding contact information is included in the original equipment packaging (Global Contact Information/European Contact Information). Should your country not be listed, please contact the distributor nearest you. A list of distributors can be found in the support area of our website (http://www.behringer.com). Registering your purchase and equipment with us helps us process your repair claims more quickly and efficiently. Thank you for your cooperation!
2. Control elements and connections
1.1 Before you get started

1.1.1 Shipment

Your product was carefully packed at the factory to ensure safe transport. Nevertheless, if the box is damaged inspect the unit immediately for signs of damage. ++ If the unit is damaged please do NOT return it to us, but notify your dealer and the shipping company immediately; otherwise, claims for damage or replacement may not be granted. ++ Always use the original box to prevent damage during storage or transport. ++ Make sure that children cannot play unsupervised with the unit or its packaging. ++ Please ensure proper disposal of all packing materials.

1.1.2 Initial operation

Ensure adequate air supply and to avoid overheating do not place the unit near radiators etc. ++ Blown fuses must be replaced by fuses of the correct rating! Please refer to the Specifications section for the applicable rating. For connection to the mains use the enclosed power cord with cold connector which complies with the relevant safety regulations. ++ Please make sure that all devices are properly grounded. For your own safety, never remove or disable the ground conductors from the devices or on the power cords. The unit must always be connected to the mains outlet with a protective grounding connection. Fig. 2.1: Control elements and connections (B212A and B215A) {1} Use this " stereo jack to connect a signal source that has " output. {2} Use this XLR connector to connect a signal source that has XLR output. ++ Always use either the XLR or the " jack input, and use the LEVEL control {4} to adapt the input sensitivity. Never use both inputs at the same time! {3} The LINK OUTPUT is directly connected to the inputs of the B212A/B215A and carries the input signal with no processing applied. In this way, you can route the signal to the input of another device (for example, a second B212A/B215A). {4} To set the volume of the LINE or MIC signal, use the LEVEL control. The left half of the control range is for attenuating the LINE signal. The right half is for raising the level of the MIC signal. {5} The CLIP LED lights up when signal distortion occurs. Reduce the volume with the LEVEL control until the CLIP LED does not light up any more, or occasionally lights up at signal peaks. ++ We would like to draw your attention to the fact that extremely loud sound levels may damage your hearing as well as your headphones/loudspeakers. Turn the LEVEL control fully to the left before you switch on the unit. Be careful to select a suitable volume at all times. {6} The HIGH control adjusts the high-frequency range. {7} Use the LOW control to raise the level of the low-frequency range. {8} The PWR LED lights up when the loudspeaker is put into operation.
++ This loudspeaker is capable of producing extreme volumes. Please keep in mind that high sound pressures do not only temporarily damage your sense of hearing, but can also cause permanent hearing damage. Be careful to select a suitable volume at all times.
Important notes concerning installation
++ The sound quality may diminish within the range of powerful broadcasting stations and high-frequency sources. Increase the distance between the transmitter and the device and use shielded cables for all connections.
1.1.3 Online Registration
Please register your new BEHRINGER equipment right after your purchase by visiting http://www.behringer.com and read the terms and conditions of our warranty carefully. Should your BEHRINGER product malfunction, it is our intention to have it repaired as quickly as possible. To arrange for warranty service, please contact the BEHRINGER retailer from

Control elements and connections

3. Application examples

++ Turn the LEVEL control fully to the left before you switch on the unit with the POWER switch. Then, raise the volume to a suitable level.
3.1 Using a mixing console
A common way to use 2 B212A/B215A loudspeakers is with a mixing console. In this case, connect each of the main outputs that are on the mixing console to a B212A/B215A loudspeaker. The B212A/B215A includes XLR and " connectors. To avoid interference, use only XLR or " jack cables.
3.2 Using several B212A/B215A loudspeakers
Fig. 2.2: Control elements and connections (B212A and B215A) {9} You can replace fuses at the FUSE SWITCH of the B212A/ B215A. Always replace fuses with the same type. Please follow the instructions given in chapter 5 Specifications. (10) The mains connection is established using a cable with an IEC mains connector. This cable is delivered with the B212A/ B215A. To avoid ground-loop hum, loudspeakers and mixing consoles should be connected to the same power circuit. (11) Press POWER to turn on your B212A/B215A. ++ The POWER switch does not fully disconnect the unit from the mains. To disconnect the unit from the mains, pull out the main cable plug or appliance coupler. When installing the product, ensure the plug or appliance coupler is readily operable. Unplug the power cord completely when the unit is not used for prolonged periods of time. (12) SERIAL NUMBER
Fig. 3.1: Wiring several B212A/B215A loudspeakers using the LINK OUTPUT connector For larger rooms, you can connect several B212A/B215A speakers using the LINK OUTPUT connector {3} (see fig. 3.1).
3.3 Direct connection of a stereo signal source
When you use two B212A/B215A loudspeakers, you can directly connect one stereo signal source, for example, a CD player. In this case, each of the speakers is connected to 1 signal-source output. (If necessary, use the appropriate adaptor.)

Application examples

4. Installation
Both audio inputs of the BEHRINGER B212A/B215A and the LINK OUTPUT connector are fully balanced. To maximize interference compensation, try to establish balanced connections to other equipment, whenever possible. Output power

Low-frequency range

RMS @ 1% THD Peak power 200W @ 8 320W @ 8 50W @ 8 80W @ 8

5. Specifications

High-frequency range

RMS @ 1% THD Peak power

XLR connector (servo-balanced)
Sensitivity Input impedance -40dBu to +4dBu 20k -40dBu to +4dBu 20k
" TRS jack (servo-balanced)
Sensitivity Input impedance

Link output

XLR connector
Loudspeaker system data B212A Fig. 4.1: " TRS connector
Frequency range Crossover frequency Maximum sound pressure level LIMITER Dynamic Equalizer 65Hz to 20kHz 2.4kHz (12dB) 125dB @ 1m optical Processor-controlled 55Hz to 20kHz 1.9kHz (12dB) 126dB @ 1m optical Processor-controlled 12kHz / 15dB 80Hz / 15dB max. 400W
T 5,0A H 250V T 2,5A H 250V Standard IEC receptacle
Frequency range Crossover frequency Maximum sound pressure level LIMITER Dynamic Equalizer

Equalizer

HIGH LOW

Power supply

Power consumption

Mains voltage / Fuse

Fig. 4.2: XLR connectors ++ Make sure that only competent people install your B212A/B215A. They must be sufficiently earthed during and after the installation process. Otherwise, electrostatic discharges may negatively affect the operating characteristics of your equipment.
100 - 120V~ (50/60Hz) 220 - 230V~ (50/60Hz) Mains connector

Physical/weight B212A

Dimensions (H x W x D) Weight approx. 21.7" x 13.6" x 10.6" (approx. 550mm x 345mm x 270mm) approx. 32.9lbs (approx. 14.9kg) approx. 27.2" x 17.3" x 13.2" (approx. 690mm x 440mm x 335mm) approx. 43lbs (approx. 19.5kg)
Dimensions (H x W x D) Weight
BEHRINGER is constantly striving to maintain the highest professional standards. As a result of these efforts, modifications may be made from time to time to existing products without prior notice. Specifications and appearance may differ from those listed or illustrated.

Specifications

6. Warranty
1 Other warranty rights and national law 1. This limited warranty is valid only if you purchased the product from a BEHRINGER authorized dealer in the country of purchase. A list of authorized dealers can be found on BEHRINGERs website www. ehringer. om b c under Where to Buy, or you can contact the BEHRINGER office closest to you. 2. BEHRINGER* warrants the mechanical and electronic components of this product to be free of defects in material and workmanship if used under normal operating conditions for a period of one (1) year from the original date of purchase (see the Limited Warranty terms in 4 below), unless a longer minimum warranty period is mandated by applicable local laws. If the product shows any defects within the specified warranty period and that defect is not excluded under 4, BEHRINGER shall, at its discretion, either replace or repair the product using suitable new or reconditioned product or parts. In case BEHRINGER decides to replace the entire product, this limited warranty shall apply to the replacement product for the remaining initial warranty period, i.e., one (1) year (or otherwise applicable minimum warranty period) from the date of purchase of the original product. 3. Upon validation of the warranty claim, the repaired or replacement product will be returned to the user freight prepaid by BEHRINGER. 4. This limited warranty is invalid if the factory-applied serial number has been altered or removed from theproduct. 5. Free inspections and maintenance/repair work are expressly excluded from this limited warranty, in particular, if caused by improper handling of the product by the user. This also applies to defects caused by normal wear and tear, in particular, of faders, crossfaders, potentiometers, keys/buttons, tubes, guitar strings, illuminants and similar parts. 6. Damage/defects caused by the following conditions are not covered by this limited warranty: == improper handling, neglect or failure to operate the unit in compliance with the instructions given in BEHRINGER user or service manuals; == connection or operation of the unit in any way that does not comply with the technical or safety regulations applicable in the country where the product isused; == damage/defects caused by acts of God/Nature (accident, fire, flood, etc) or any other condition that is beyond the control of BEHRINGER. 7. Any repair or opening of the unit carried out by unauthorized personnel (userincluded) will void the limited warranty. 8. If an inspection of the product by BEHRINGER shows that the defect in question is not covered by the limited warranty, the inspection costs are payable by thecustomer. 9. Products which do not meet the terms of this limited warranty will be repaired exclusively at the buyers expense. BEHRINGER or its authorized service center will inform the buyer of any such circumstance. If the buyer fails to submit a written repair order within 6 weeks after notification, BEHRINGER will return the unit C.O.D. with a separate invoice for freight and packing. Such costs will also be invoiced separately when the buyer has sent in a written repair order. 10. Authorized BEHRINGER dealers do not sell new products directly in online auctions. Purchases made through an online auction are on a buyer beware basis. Online auction confirmations or sales receipts are not accepted for warranty verification and BEHRINGER will not repair or replace any product purchased through an onlineauction. 5 Warranty transferability This limited warranty is extended exclusively to the original buyer (customer of authorized retail dealer) and is not transferable to anyone who may subsequently purchase this product. No other person (retail dealer, etc.) shall be entitled to give any warranty promise on behalf of BEHRINGER. 6 Claim for damage Subject only to the operation of mandatory applicable local laws, BEHRINGER shall have no liability to the buyer under this warranty for any consequential or indirect loss or damage of any kind. In no event shall the liability of BEHRINGER under this limited warranty exceed the invoiced value of the product. 7 Limitation of liability This limited warranty is the complete and exclusive warranty between you and BEHRINGER. It supersedes all other written or oral communications related to this product. BEHRINGER provides no other warranties for this product. 8 Other warranty rights and nationallaw 1. This limited warranty does not exclude or limit the buyers statutory rights as a consumer in any way. 2. The limited warranty regulations mentioned herein are applicable unless they constitute an infringement of applicable mandatory local laws. 3. This warranty does not detract from the sellers obligations in regard to any lack of conformity of the product and any hidden defect. 9 Amendment Warranty service conditions are subject to change without notice. For the latest warranty terms and conditions and additional information regarding BEHRINGERs limited warranty, please see complete details online at www. ehringer. om. b c

* BEHRINGER Macao Commercial Offshore Limited of Rue de Pequim No. 202-A, Macau Finance Centre 9/J, Macau, including all BEHRINGER group companies
4. Warranty claims other than those indicated above are expressly excluded.
PLEASE RETAIN YOUR SALES RECEIPT. IT IS YOUR PROOF OF PURCHASE COVERING YOUR LIMITED WARRANTY. THIS LIMITED WARRANTY IS VOID WITHOUT SUCH PROOF OFPURCHASE. 2 Online registration Please do remember to register your new BEHRINGER equipment right after your purchase at www. ehringer. om under Support and kindly read b c the terms and conditions of our limited warranty carefully. Registering your purchase and equipment with us helps us process your repair claims quicker and more efficiently. Thank you for your cooperation! 3 Return authorization number 1. To obtain warranty service, please contact the retailer from whom the equipment was purchased. Should your BEHRINGER dealer not be located in your vicinity, you may contact the BEHRINGER distributor for your country listed under Support at www. ehringer. om. If your country is not listed, b c please check if your problem can be dealt with by our Online Support which may also be found under Support at www. ehringer. om. Alternatively, b c please submit an online warranty claim at www. ehringer. om BEFORE b c returning the product. All inquiries must be accompanied by a description of the problem and the serial number of the product. After verifying the products warranty eligibility with the original sales receipt, BEHRINGER will then issue a Return Materials Authorization (RMA)number. 2. Subsequently, the product must be returned in its original shipping carton, together with the return authorization number to the address indicated byBEHRINGER. 3. Shipments without freight prepaid will not beaccepted. 4 Warranty Exclusions 1. This limited warranty does not cover consumable parts including, but not limited to, fuses and batteries. Where applicable, BEHRINGER warrants the valves or meters contained in the product to be free from defects in material and workmanship for a period of ninety (90) days from date of purchase. 2. This limited warranty does not cover the product if it has been electronically or mechanically modified in any way. If the product needs to be modified or adapted in order to comply with applicable technical or safety standards on a national or local level, in any country which is not the country for which the product was originally developed and manufactured, this modification/ adaptation shall not be considered a defect in materials or workmanship. This limited warranty does not cover any such modification/adaptation, regardless of whether it was carried out properly or not. Under the terms of this limited warranty, BEHRINGER shall not be held responsible for any cost resulting from such a modification/adaptation. 3. This limited warranty covers only the product hardware. It does not cover technical assistance for hardware or software usage and it does not cover any software products whether or not contained in the product. Any such software is provided AS IS unless expressly provided for in any enclosed software limitedwarranty.

Technical specifications and appearance are subject to change without notice. The information contained herein is correct at the time of printing. BEHRINGER accepts no liability for any loss which may be suffered by any person who relies either wholly or in part upon any description, photograph or statement contained herein. Colors and specifications may vary slightly from product. BEHRINGER products are sold through authorized dealers only. Distributors and dealers are not agents of BEHRINGER and have absolutely no authority to bind BEHRINGER by any express or implied undertaking or representation. This manual is copyrighted. No part of this manual may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording of any kind, for any purpose, without the express written permission of RedChipCompanyLtd. ALL RIGHTS RESERVED. 2009 Red Chip Company Ltd. Trident Chambers, Wickhams Cay, P.O. Box 146, Road Town, Tortola, British Virgin Islands

Warranty