Deltacomp adaptive limiter virtually eliminates power-amp distortion for clear tone and punchy response Fender amplifiers are the result of over 50 years of experience and dedication that our engineers and countless musicians have gained in recording studios and on stages around the world. Fender, The Sound That Creates Legends.

Front Panel Functions

1. INPUT Plug your bass guitar in here. 2. PASSIVE/ACTIVE - Selects pickup type (sensitivity). Press in for active preamps (6dB attenuation). 3. MID SCOOP Mid-frequency cut; emphasizes bass and treble tones. Button OUT bypasses Mid Scoop Button IN activates Mid Scoop 4. VOLUME Adjusts the loudness of the amplifier. 5. EQUALIZER Adjusts tone in 4 frequency bands. Each knob provides up to 15 dB of cut or boost with the center 0 position having no effect on the signal. 6. CD IN RCA input jacks for use with a portable CD or tape player, drum machine, etc. These input jacks are not affected by the amplifiers volume or tone controls. Adjust the signal at the source. 7. PRE AMP OUT Connect this jack to the input of an external effects device.
8. POWER AMP IN Connect this jack to the output of an external effects device. 9. HEADPHONES Output jack for standard stereo or mono headphones. Using this jack automatically disconnects the speaker. 10. LINE LEVEL - Adjusts the output level of the LINE OUT jack. 11. LINE OUT - Balanced XLR jack for output to sound reinforcement/recording equipment. 12. GROUND LIFT - Disconnects the LINE OUT ground connection (pin-1) which may reduce noise levels. 13. POWER INDICATOR Illuminates when the unit is ON. 14. POWER SWITCH This switch turns the unit ON and OFF.

www.f e n d e r com.

Specifications
MODEL: TYPE: PART NUMBER: (120 V, 60 Hz) (110 V, 60 Hz) TW (240 V, 50 Hz) AUS (230 V, 50 Hz) UK (220 V, 50 Hz) ARG (230 V, 50 Hz) EUR (100 V, 50 Hz) JPN (220 V, 60 Hz) ROK RUMBLE 100 (2x10) PR 559 RUMBLE 100 (1x15) PR 559
POWER REQUIREMENTS: POWER OUTPUT (@ 1 kHz):
230 W < 100 W R.M.S. at <2% THD 92 W R.M.S. at <.02% THD 4 < < < < < < < < < < < <
RATED LOAD IMPEDANCE: INPUT IMPEDANCE INSTRUMENT: CD IN: INSTRUMENT: POWER AMP IN: CD IN: BASS: LOW MID: HIGH MID: TREBLE: SEND IMPEDANCE: RETURN IMPEDANCE:
718 k (128 k PASSIVE/ACTIVE in) 100 k 50 mV (100 mV PASSIVE/ACTIVE in) 750 mV 1.1 V 15 dB at 50 Hz 15 dB at 330 Hz 15 dB at 1.6 kHz 15 dB at 8 kHz

FULL POWER SENSITIVITY

(VOLUME knob @ 10, EQ knobs @ 0 and MIDSCOOP button OUT)

GEWICHT:

Die technischen Daten des Produkts knnen jederzeit ohne vorherige Ankndigung gendert werden.

Rumble 100

11. CD 12. 13. 14.
17 RUMBLE 100 (2x10) PR 559 RUMBLE 100 (1x15) PR 559
(120 V, 60 Hz) (110 V, 60 Hz) TW (240 V, 50 Hz) AUS (230 V, 50 Hz) UK (220 V, 50 Hz) ARG (230 V, 50 Hz) EUR (100 V, 50 Hz) JPN (220 V, 60 Hz) ROK 230 W < 100 W R.M.S. at <2% THD 92 W R.M.S. at <.02% THD k (128 k PASSIVE/ACTIVE in) 100 k 50 mV (100 mV PASSIVE/ACTIVE in) 750 mV 1.1 V 15 dB at 50 Hz 15 dB at 330 Hz 15 dB at 1.6 kHz 15 dB at 8 kHz 1k 18 k < < < < < < < < < < < < < <
Two10" 8 Special Design One 15" 4 Special Design speakers, One Piezo Horn speaker, One Piezo Horn 21.5" (54.6 cm) 24" (61 cm) 14.5" (36.8 cm) 64 lb (29 kg) 25 in (63.5 cm) 21 in (53.3 cm) 13 in (33.0 cm) 60 lb (27.2 kg)
A PRODUCT OF: FENDER MUSICAL INSTRUMENTS CORP. CORONA, CALIFORNIA USA Fender and Rumble are trademarks of FMIC. Other trademarks are property of their respective owners. 2005 FMIC. All rights reserved.

P/N 061558