Owners Manual
Thank you, and congratulations on your choice of the Roland CUBE-30 Guitar Amplifier. Before using this unit, carefully read the sections entitled: IMPORTANT SAFETY INSTRUCTIONS (p. 2) USING THE UNIT SAFELY (p. 34) IMPORTANT NOTES (p. 4)
These sections provide important information concerning the proper operation of the unit. Additionally, in order to feel assured that you have gained a good grasp of every feature provided by your new unit, Owners manual should be read in its entirety. The manual should be saved and kept on hand as a convenient reference.

Main Features

30-watt output, high-performance, DSP guitar amp with built-in 25 cm (10-inch) speaker Offers eight different COSM amp types Amps included: JC CLEAN, ACOUSTIC, BLACK PANEL, BRITISH COMBO, TWEED, CLASSIC STACK, METAL STACK, and R-FIER STACK Composite Object Sound Modeling (COSM) is Rolands innovative and powerful sound modeling technology. COSM analyzes the many factors that make up the original sound, such as the electrical and physical characteristics of the original, and then produces a digital model that can reproduce the same sound. Channel can be switched between CLEAN and LEAD. Channel switching can be done via foot switch. Includes easy-to-use, three-band equalizer (Bass/Middle/Treble) Onboard EFX section includes 4 types of digital effect, chorus, flanger, phaser and tremolo; foot switch (optional) can be used to switch EFX on and off Separate Delay and Reverb effects provided in addition to the EFX Equipped with RECORDING OUT jack convenient for use in recording and for use as headphone out External input jack allows you to connect a CD player or other backing device
Copyright 2002 ROLAND CORPORATION All rights reserved. No part of this publication may be reproduced in any form without the written permission of ROLAND CORPORATION.

CAUTION

RISK OF ELECTRIC SHOCK DO NOT OPEN
ATTENTION: RISQUE DE CHOC ELECTRIQUE NE PAS OUVRIR
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated dangerous voltage within the products enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the product.
INSTRUCTIONS PERTAINING TO A RISK OF FIRE, ELECTRIC SHOCK, OR INJURY TO PERSONS.
IMPORTANT SAFETY INSTRUCTIONS SAVE THESE INSTRUCTIONS
WARNING - When using electric products, basic precautions should always be followed, including the following: 1. 2. 3. 4. 5. 6. 7. 8. Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Do not use this apparatus near water. Clean only with a dry cloth. Do not block any of the ventilation openings. Install in accordance with the manufacturers instructions. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. When the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. 10. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. 11. Only use attachments/accessories specified by the manufacturer. 12. Never use with a cart, stand, tripod, bracket, or table except as specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over. 13. Unplug this apparatus during lightning storms or when unused for long periods of time. 14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

For the U.K. WARNING: THIS APPARATUS MUST BE EARTHED IMPORTANT: THE WIRES IN THIS MAINS LEAD ARE COLOURED IN ACCORDANCE WITH THE FOLLOWING CODE. GREEN-AND-YELLOW: EARTH, BLUE: NEUTRAL, BROWN: LIVE As the colours of the wires in the mains lead of this apparatus may not correspond with the coloured markings identifying the terminals in your plug, proceed as follows: The wire which is coloured GREEN-AND-YELLOW must be connected to the terminal in the plug which is marked by the letter E or by the safety earth symbol or coloured GREEN or GREEN-AND-YELLOW. The wire which is coloured BLUE must be connected to the terminal which is marked with the letter N or coloured BLACK. The wire which is coloured BROWN must be connected to the terminal which is marked with the letter L or coloured RED.

USING THE UNIT SAFELY

Used for instructions intended to alert the user to the risk of death or severe injury should the unit be used improperly. Used for instructions intended to alert the user to the risk of injury or material damage should the unit be used improperly. * Material damage refers other adverse effects respect to the home furnishings, as well animals or pets. to damage or caused with and all its to domestic
The symbol alerts the user to important instructions or warnings.The specific meaning of the symbol is determined by the design contained within the triangle. In the case of the symbol at left, it is used for general cautions, warnings, or alerts to danger. The symbol alerts the user to items that must never be carried out (are forbidden). The specific thing that must not be done is indicated by the design contained within the circle. In the case of the symbol at left, it means that the unit must never be disassembled. The q symbol alerts the user to things that must be carried out. The specific thing that must be done is indicated by the design contained within the circle. In the case of the symbol at left, it means that the powercord plug must be unplugged from the outlet.
Before using this unit, make sure to read the instructions below, and the Owners Manual....
Do not open or perform any internal modifications on the unit....
Do not attempt to repair the unit, or replace parts within it (except when this manual provides specific instructions directing you to do so). Refer all servicing to your retailer, the nearest Roland Service Center, or an authorized Roland distributor, as listed on the Information page....

This unit, either alone or in combination with an amplifier and headphones or speakers, may be capable of producing sound levels that could cause permanent hearing loss. Do not operate for a long period of time at a high volume level, or at a level that is uncomfortable. If you experience any hearing loss or ringing in the ears, you should immediately stop using the unit, and consult an audiologist....
Do not allow any objects (e.g., flammable material, coins, pins); or liquids of any kind (water, soft drinks, etc.) to penetrate the unit.
Never use or store the unit in places that are: Subject to temperature extremes (e.g., direct sunlight in an enclosed vehicle, near a heating duct, on top of heat-generating equipment); or are Damp (e.g., baths, washrooms, on wet floors); or are Humid; or are Exposed to rain; or are Dusty; or are Subject to high levels of vibration....
In households with small children, an adult should provide supervision until the child is capable of following all the rules essential for the safe operation of the unit....
Protect the unit from strong impact. (Do not drop it!)....
Make sure you always have the unit placed so it is level and sure to remain stable. Never place it on stands that could wobble, or on inclined surfaces....
The unit should be connected to a power supply only of the type described in the operating instructions, or as marked on the unit....
Do not excessively twist or bend the power cord, nor place heavy objects on it. Doing so can damage the cord, producing severed elements and short circuits. Damaged cords are fire and shock hazards!....
Do not force the units power-supply cord to share an outlet with an unreasonable number of other devices. Be especially careful when using extension cordsthe total power used by all devices you have connected to the extension cords outlet must never exceed the power rating (watts/amperes) for the extension cord. Excessive loads can cause the insulation on the cord to heat up and eventually melt through....
Before using the unit in a foreign country, consult with your retailer, the nearest Roland Service Center, or an authorized Roland distributor, as listed on the Information page....
The unit should be located so that its location or position does not interfere with its proper ventilation....
Never handle the power cord or its plug with wet hands when plugging into, or unplugging from, an outlet....
Always grasp only the plug on the power-supply cord when plugging into, or unplugging from an outlet....
Before moving the unit, disconnect the power plug from the outlet, and pull out all cords from external devices....

Try to prevent cords and cables from becoming entangled. Also, all cords and cables should be placed so they are out of the reach of children....
Before cleaning the unit, turn off the power and unplug the power cord from the outlet....
Never climb on top of, nor place heavy objects on the unit....
Whenever you suspect the possibility of lightning in your area, pull the plug on the power cord out of the outlet....

IMPORTANT NOTES

In addition to the items listed under IMPORTANT SAFETY INSTRUCTIONS and USING THE UNIT SAFELY on pages 2 and 34, please read and observe the following:

Power Supply

Maintenance
Do not use this unit on the same power circuit with any device that will generate line noise (such as an electric motor or variable lighting system).
Before connecting this unit to other devices, turn off the power to all units. This will help prevent malfunctions and/or damage to speakers or other devices.
To clean the unit, use a dry, soft cloth; or one that is slightly dampened. Try to wipe the entire surface using an equal amount of strength, moving the cloth along with the grain of the wood. Rubbing too hard in the same area can damage the finish.
Never use benzine, thinners, alcohol or solvents of any kind, to avoid the possibility of discoloration and/or deformation.

Placement

Additional Precautions
Using the unit near power amplifiers (or other equipment containing large power transformers) may induce hum. To alleviate the problem, change the orientation of this unit; or move it farther away from the source of interference.

352a 352b

Use a reasonable amount of care when using the units buttons, sliders, or other controls; and when using its jacks and connectors. Rough handling can lead to malfunctions.
This device may interfere with radio and television reception. Do not use this device in the vicinity of such receivers. Noise may be produced if wireless communications devices, such as cell phones, are operated in the vicinity of this unit. Such noise could occur when receiving or initiating a call, or while conversing. Should you experience such problems, you should relocate such wireless devices so they are at a greater distance from this unit, or switch them off.
When connecting / disconnecting all cables, grasp the connector itselfnever pull on the cable. This way you will avoid causing shorts, or damage to the cables internal elements.
A small amount of heat will radiate from the unit during normal operation.
To avoid disturbing your neighbors, try to keep the units volume at reasonable levels. You may prefer to use headphones, so you do not need to be concerned about those around you (especially when it is late at night).
Do not expose the unit to direct sunlight, place it near devices that radiate heat, leave it inside an enclosed vehicle, or otherwise subject it to temperature extremes. Also, do not allow lighting devices that normally are used while their light source is very close to the unit (such as a piano light), or powerful spotlights to shine upon the same area of the unit for extended periods of time. Excessive heat can deform or discolor the unit.

355 356

When you need to transport the unit, package it in the box (including padding) that it came in, if possible. Otherwise, you will need to use equivalent packaging materials.
To avoid possible breakdown, do not use the unit in a wet area, such as an area exposed to rain or other moisture. Do not allow rubber, vinyl, or similar materials to remain on the unit for long periods of time. Such objects can discolor or otherwise harmfully affect the finish.
Use a cable from Roland to make the connection. If using some other make of connection cable, please note the following precautions. Some connection cables contain resistors. Do not use cables that incorporate resistors for connecting to this unit. The use of such cables can cause the sound level to be extremely low, or impossible to hear. For information on cable specifications, contact the manufacturer of the cable.
Do not put anything that contains water (e.g., flower vases) on the unit. Also, avoid the use of insecticides, perfumes, alcohol, nail polish, spray cans, etc., near the unit. Swiftly wipe away any liquid that spills on the unit using a dry, soft cloth.
To prevent malfunction and/or damage to speakers or other devices, always turn down the volume, and turn off the power on all devices before making any connections.
Do not paste stickers, decals, or the like to this instrument. Peeling such matter off the instrument may damage the exterior finish.
Once the connections have been completed, turn on power to your various devices in the order specified. By turning on devices in the wrong order, you risk causing malfunction and/or damage to speakers and other devices. When powering up: Turn on the power to the CUBE-30 last. When powering down: Turn off the power to the CUBE-30 first. Wrap the AC cord around the cord hook when trans-porting or storing the unit.
Names of Things and What They Do

fig.01

1. INPUT Jack
Connect your guitar here.

2. SELECT Switch

Switches you between the CLEAN and LEAD channels. You can confirm which channel is selected by checking the indicator's color (JC CLEAN: green; LEAD: red). The channel can be switched using the optional BOSS FS-5U foot switch.
This is modeled on the vintage Tweed Fender Bassman 4x10 combo. The amplifier's four 10-inch speakers produce a clear upper-midrange with a fat low end, and its unique crunch tones make it a favorite of blues-rock guitarists.

CLASSIC STACK

This is modeled on the sound and response of a Marshall JMP1987. The legendary JMP1987 is renowned for its smooth tone and presence-perfect for classic and hard rock.

METAL STACK

JC CLEAN Channel
This is a model of Rolands famous JC-120 Jazz Chorus guitar amplifier. The ultra-clean, ultra-flat sound offers a smooth. This becomes more effective when used in combination with a multi effector.
This is modeled on the Peavey EVH-5150. This is the high gain amp, so even at low volumes, you can still get heavy distortion and sustain.

R-FIER STACK

This is modeled on the MESA/Boogie Rectifier. This super high gain amp is capable of producing slash metal, grunge, and a wide range of other lead sounds.

3. VOLUME Knob

Adjusts the JC CLEAN channel volume.

LEAD Channel

4. Type Switch
You can select from the following seven amp types:
Use of the RECORDING OUT/PHONES jack allows even better reproduction of the COSM-modeled sound. * All product names mentioned in this document are trademarks or registered trademarks of their respective owners, and are not related to Roland Corporation. In this manual, these names are used as appropriate ways to indicate sounds that are simulated using COSM technology.

ACOUSTIC

By combining acoustic guitar simulation with COSM amplifier modeling technology, this original amplifier model gives you a dynamic acoustic guitar sound using a standard electric guitar.

5. GAIN Knob

Adjusts the LEAD channel's distortion level.

BLACK PANEL

This is modeled on the classic Fender Twin Reverb amplifier, used in a wide variety of musical styles, from country to blues, jazz and rock. Exhibiting rich lows and a bright high end.

6. VOLUME Knob

Adjusts the LEAD channel volume.

EQUALIZER

7. BASS Knob
Adjusts the tone quality of the lower range.

BRIT COMBO

This is modeled on the Vox AC-30TB, the rock amplifier that created the Liverpool sound of the '60s. It can produce a broad range of sounds, from clean to overdrive, with increased distortion and greater power in the low-midrange when the amplifier's gain is boosted.

8. MIDDLE Knob

Adjusts the tone quality of the midrange.

9. TREBLE Knob

Adjusts the tone quality of the upper range.

EFX (Effects)

10. EFX (Effects) Knob
Turn this knob to chorus, flanger, phaser, or tremolo to select the corresponding effect. Turn the knob to adjust the amount of effect applied. The ON indicator lights up when EFX is turned on, and goes out when EFX is turned off. You can also turn EFX on and off using an optional foot switch (the BOSS FS-5U). * Graduations for CHORUS, FLANGER, PHASER,TREMOLO on a panel are for reference. Be sure to check the sound as you adjust the effects.

fig.02

12. FOOT SW (Foot Switch) Jack
You can use foot switches (the optional BOSS FS-5U) connected using a connection cable (the optional PCS-31) to switch channels (JC CLEAN/LEAD), and to turn EFX on and off.

fig.06

PCS-31 white red

CHORUS

In this effect, a slightly detuned sound is added to the original sound, giving the sound greater breadth and fullness.

SELECT

Polarity Switch

fig.03

FLANGER
This creates a flanging effect that creates a sort of spinning sensation with the sound.
* When you connect only one foot switch by mono cable, you can only use it to switch channels (JC CLEAN/LEAD).

13. AUX IN Jack

You can connect a CD player or other kind of device and have it play along with your guitar. This accepts a 1/4" stereo phone plug. However, the speaker and RECORDING OUT/PHONES output is monaural. * Determine the volume level by adjusting the volume control of the connected device.

fig.04

PHASER
This effect adds a variable phaseshifted signal to the direct sound, giving the sound a swirling character.

fig.05

14. RECORDING OUT/PHONES Jack

TREMOLO

Tremolo is an effect that creates a cyclic change in volume.

When Using RECORDING OUT

Use mono 1/4" phone plugs when connecting to this jack. Volume level of RECORDING OUT can be easily adjusted if you set the VOLUME knob of JC CLEAN or LEAD channel shown as right side.

DELAY/REVERB

11. DELAY/REVERB Knob

Turn this knob to DELAY or REVERB to switch to that effect. Turn the knob to adjust the amount of effect applied.
* Graduations for DELAY, REVERB on a panel are for reference. Be sure to check the sound as you adjust the effects.

fig.05a

When Using Headphones
Connect headphones to this jack. * No sound is played through the unit's speaker while the RECORDING OUT/PHONES jack is in use.

15. POWER Switch

Turns the power on and off. * This unit is equipped with a protection circuit. A brief interval (a few seconds) after power up is required before the unit will operate normally.
Turn the knob to change the delay time.

fig.05b

REVERB
Turn the knob to adjust the reverb level.

Main Specifications

Rated Power Output

Connectors

INPUT Jack AUX IN Jack RECORDING OUT/PHONES Jack FOOT Switch Jack (TIP:SELECT RING:EFX)
Nominal Input Level (@1kHz)
INPUT (JC CLEAN channel): -10 dBu/1 M AUX IN: -10 dBu

Power Supply Speaker

25 cm (10 inch) AC 117 V, 230 V or 240 V
Power Consumption Controls
POWER Switch SELECT Switch <JC CLEAN Channel> VOLUME Knob <LEAD Channel> TYPE Switch TYPE (ACOUSTIC, BLACK PANEL, BRIT COMBO, TWEED, CLASSIC STACK, METAL STACK, R-FIER STACK) GAIN Knob VOLUME Knob <EQUALIZER> BASS Knob MIDDLE Knob TREBLE Knob <EFX> EFX Knob (CHORUS, FLANGER, PHASER, TREMOLO) <DELAY/REVERB> DELAY/REVERB Knob 34 W

Dimension

385 (W) X 240 (D) X 380 (H) mm 15-3/16 (W) X 9-1/2 (D) X 15 (H) inches

Weights

9.2 kg / 20 lbs 5 oz

Accessories

Options
Footswitch FS-5U (BOSS) Connection cable PCS-31

Indicators

JC CLEAN Channel LEAD Channel EFX

09A(CE;EMC+LVD).e

* 0 dBu = 0.775 Vrms * In the interest of product improvement, the specifications and/or appearance of this unit are subject to change without prior notice.
For EU Countries This product complies with the requirements of European Directives EMC 89/336/EEC and LVD 73/23/EEC.

For the USA

FEDERAL COMMUNICATIONS COMMISSION RADIO FREQUENCY INTERFERENCE STATEMENT
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. Unauthorized changes or modification to this system can void the users authority to operate this equipment. This equipment requires shielded interface cables in order to meet FCC class B Limit.

For Canada

NOTICE
This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations.
Cet appareil numrique de la classe B respecte toutes les exigences du Rglement sur le matriel brouilleur du Canada.
When you need repair service, call your nearest Roland Service Center or authorized Roland distributor in your country as shown below.

Information

AFRICA

Al Fanny Trading Office

9, EBN Hagar A1 Askalany Street, ARD E1 Golf, Heliopolis, Cairo 11341, EGYPT TEL: 20-2-417-1828

SINGAPORE

Swee Lee Company
150 Sims Drive, SINGAPORE 387381 TEL: 846-3676

PANAMA

SUPRO MUNDIAL, S.A.
Boulevard Andrews, Albrook, Panama City, REP. DE PANAMA TEL: 315-0101

Roland Italy S. p. A.

Viale delle Industrie 8, 20020 Arese, Milano, ITALY TEL: (02) 937-78300

ISRAEL

Halilit P. Greenspoon & Sons Ltd.
8 Retzif Ha'aliya Hashnya St. Tel-Aviv-Yafo ISRAEL TEL: (03) 6823666

CRISTOFORI MUSIC PTE LTD

Blk 3014, Bedok Industrial Park E, #02-2148, SINGAPORE 489980 TEL: 243 9555

PARAGUAY

Distribuidora De Instrumentos Musicales
J.E. Olear y ESQ. Manduvira Asuncion PARAGUAY TEL: (021) 492-124

NORWAY

Roland Scandinavia Avd. Kontor Norge
Lilleakerveien 2 Postboks 95 Lilleaker N-0216 Oslo NORWAY TEL: 273 0074

JORDAN

AMMAN Trading Agency
245 Prince Mohammad St., Amman 1118, JORDAN TEL: (06) 464-1200

REUNION

Maison FO - YAM Marcel
25 Rue Jules Hermann, Chaudron - BP491 Ste Clotilde Cedex, REUNION ISLAND TEL: (0262) 218-429

TAIWAN

ROLAND TAIWAN ENTERPRISE CO., LTD.
Room 5, 9fl. No. 112 Chung Shan N.Road Sec.2, Taipei, TAIWAN, R.O.C. TEL: (02) 2561 3339

VIDEO Broadcast S.A.

Portinari 199 (ESQ. HALS), San Borja, Lima 41, REP. OF PERU TEL: (01) 4758226

POLAND

P. P. H. Brzostowicz
UL. Gibraltarska 4. PL-03664 Warszawa POLAND TEL: (022) 19

KUWAIT

Easa Husain Al-Yousifi
Abdullah Salem Street, Safat, KUWAIT TEL: 243-6399

Roland Corporation Ltd.
32 Shaddock Street, Mount Eden, Auckland, NEW ZEALAND TEL: (09) 3098 715
BELGIUM/HOLLAND/ LUXEMBOURG Roland Benelux N. V.
Houtstraat 3, B-2260, Oevel (Westerlo) BELGIUM TEL: (014) 575811
Technical Light & Sound Center
Bldg. No. 47, Khaled Ebn Al Walid St. Damascus, SYRIA TEL: (011) 221-1230

SWEDEN

Roland Scandinavia A/S SWEDISH SALES OFFICE
Danvik Center 28, 2 tr. S-Nacka SWEDEN TEL: (08) 702 0020

HONG KONG

Tom Lee Music Co., Ltd. Service Division
22-32 Pun Shan Street, Tsuen Wan, New Territories, HONG KONG TEL: 2415 0911

CENTRAL/LATIN AMERICA

ARGENTINA
Instrumentos Musicales S.A.
Av.Santa Fe 2055 (1123) Buenos Aires ARGENTINA TEL: (011) 4508-2700

DENMARK

Roland Scandinavia A/S
Nordhavnsvej 7, Postbox 880, DK-2100 Copenhagen DENMARK TEL: (039)16 6200

TURKEY

Barkat muzik aletleri ithalat ve ihracat Ltd Sti
Siraselviler Caddesi Siraselviler Pasaji No:74/20 Taksim - Istanbul, TURKEY TEL: (0212) 2499324

SWITZERLAND

Roland (Switzerland) AG Musitronic AG
Gerberstrasse 5, Postfach, CH-4410 Liestal, SWITZERLAND TEL: (061) 927-8383

FRANCE

Roland France SA
4, Rue Paul Henri SPAAK, Parc de l'Esplanade, F St. Thibault, Lagny Cedex FRANCE TEL: 73 500

UKRAINE

TIC-TAC
Mira Str. 19/108 P.O. Box Munkachevo, UKRAINE TEL: (03131) 414-40

U.A.E.

Zak Electronics & Musical Instruments Co. L.L.C.
Zabeel Road, Al Sherooq Bldg., No. 14, Grand Floor, Dubai, U.A.E. TEL: (04) 3360715
Rivera Digitec (India) Pvt. Ltd.
409, Nirman Kendra Mahalaxmi Flats Compound Off. Dr. Edwin Moses Road, Mumbai-400011, INDIA TEL: (022) 498 3079

BRAZIL

Roland Brasil Ltda
Rua San Jose, 780 Sala B Parque Industrial San Jose Cotia - Sao Paulo - SP, BRAZIL TEL: (011) 4615 5666

FINLAND

Roland Scandinavia As, Filial Finland
Lauttasaarentie 54 B Fin-00201 Helsinki, FINLAND TEL: (9) 682 4020

UNITED KINGDOM

Roland (U.K.) Ltd.
Atlantic Close, Swansea Enterprise Park, SWANSEA SA7 9FJ, UNITED KINGDOM TEL: (01792) 700139

NORTH AMERICA

CANADA
Roland Canada Music Ltd. (Head Office)
5480 Parkwood Way Richmond B. C., V6V 2M4 CANADA TEL: (0604) 270 6626

INDONESIA

PT Citra IntiRama
J1. Cideng Timur No. 15J-150 Jakarta Pusat INDONESIA TEL: (021) 6324170

COSTA RICA

JUAN Bansbach Instrumentos Musicales
Ave.1. Calle 11, Apartado 10237, San Jose, COSTA RICA TEL: 258-0211

GERMANY

Roland Elektronische Musikinstrumente HmbH.
Oststrasse 96, 22844 Norderstedt, GERMANY TEL: (040) 52 60090

Cosmos Corporation

1461-9, Seocho-Dong, Seocho Ku, Seoul, KOREA TEL: (02) 3486-8855

MIDDLE EAST

BAHRAIN

Moon Stores

No.16, Bab Al Bahrain Avenue, P.O.Box 247, Manama 304, State of BAHRAIN TEL: 211 005

Comercial Fancy S.A.

Rut.: 96.919.420-1 Nataniel Cox #739, 4th Floor Santiago - Centro, CHILE TEL: (02) 688-9540

GREECE

STOLLAS S.A. Music Sound Light
155, New National Road Patras 26442, GREECE TEL: (061) 43-5400
Roland Canada Music Ltd. (Toronto Office)
Unit 2, 109 Woodbine Downs Blvd, Etobicoke, ON M9W 6Y1 CANADA TEL: (0416) 213 9707

MALAYSIA

BENTLEY MUSIC SDN BHD
140 & 142, Jalan Bukit Bintang 55100 Kuala Lumpur,MALAYSIA TEL: (03) 2144-3333

EL SALVADOR

OMNI MUSIC
75 Avenida Norte y Final Alameda Juan Pablo , Edificio No.4010 San Salvador, EL SALVADOR TEL: 262-0788

U. S. A.

Roland Corporation U.S.
5100 S. Eastern Avenue Los Angeles, CA 90040-2938, U. S. A. TEL: (323) 890 3700

HUNGARY

Intermusica Ltd.
Warehouse Area DEPO Pf.83 H-2046 Torokbalint, HUNGARY TEL: (23) 511011

CYPRUS

Radex Sound Equipment Ltd.
17, Diagorou Street, Nicosia, CYPRUS TEL: (02) 66-9426
PHILIPPINES G.A. Yupangco & Co. Inc.
339 Gil J. Puyat Avenue Makati, Metro Manila 1200, PHILIPPINES TEL: (02) 899 9801

MEXICO

Casa Veerkamp, s.a. de c.v.
Av. Toluca No. 323, Col. Olivar de los Padres 01780 Mexico D.F. MEXICO TEL: 668-0480

IRELAND

Roland Ireland
Audio House, Belmont Court, Donnybrook, Dublin 4. Republic of IRELAND TEL: (01) 2603501

MOCO, INC.

No.41 Nike St., Dr.Shariyati Ave., Roberoye Cerahe Mirdamad Tehran, IRAN TEL: (021) 285-4169
As of January 1, 2002 (Roland)

xxxxxxxx

01-xx-xx-1*DH

CUBE-30X_e.book 1

Owners Manual
Thank you, and congratulations on your choice of the Roland CUBE-30X Guitar Amplifier. Before using this unit, carefully read the sections entitled IMPORTANT SAFETY INSTRUCTIONS (page 2) USING THE UNIT SAFELY (page 35) IMPORTANT NOTES (page 5) Additionally, in order to feel assured that you have gained a good grasp of every feature provided by your new unit, Owners manual should be read in its entirety. The manual should be saved and kept on hand as a convenient reference.

Main Features

30-watt output, high-performance, DSP guitar amp with built-in 25 cm (10-inch) speaker. Offers nine different COSM amp types Amps included: JC CLEAN, ACOUSTIC, BLACK PANEL, BRITISH COMBO, TWEED, CLASSIC STACK, METAL STACK, R-FIER STACK and DYNA AMP Composite Object Sound Modeling (COSM) is Rolands innovative and powerful sound modeling technology. COSM analyzes the many factors that make up the original sound, such as the electrical and physical characteristics of the original, and then produces a digital model that can reproduce the same sound. Channels can be switched between CLEAN and LEAD. Channel switching can be done via optional footswitch. The CUBE-30X includes Rolands Power Squeezer function. This feature enables you to reduce the maximum output from 30 watts to 2 watts at the press of a single button. When switched on, Power Squeezer reproduces the distortion of a fullycranked power amp along with a great sound, regardless of the volume level, but with a 2-watt output that is easy to handle in the home. A tuner function is also included. This feature allows you to tune your guitar while the instrument is connected to the CUBE-30X. Includes easy-to-use, three-band equalizer (Bass/Middle/Treble). Onboard EFX section includes 4 types of digital effect, chorus, flanger, phaser and tremolo; footswitch (optional) can be used to switch EFX on and off. Separate Delay and Reverb effects provided in addition to the EFX. Equipped with RECORDING OUT jack convenient for use in recording and for use as headphone out. The unit is equipped with an external input jack, which is convenient for your practice sessions. Use this to play along with sounds from CD players and MP3 players.
Copyright 2006 ROLAND CORPORATION All rights reserved. No part of this publication may be reproduced in any form without the written permission of ROLAND CORPORATION.

CUBE-30X_e.book 2

IMPORTANT SAFETY INSTRUCTIONS
WARNING: To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture.

CAUTION

RISK OF ELECTRIC SHOCK DO NOT OPEN
ATTENTION: RISQUE DE CHOC ELECTRIQUE NE PAS OUVRIR
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated dangerous voltage within the products enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the product.
INSTRUCTIONS PERTAINING TO A RISK OF FIRE, ELECTRIC SHOCK, OR INJURY TO PERSONS.
IMPORTANT SAFETY INSTRUCTIONS SAVE THESE INSTRUCTIONS
WARNING - When using electric products, basic precautions should always be followed, including the following: 1. 2. 3. 4. 5. 6. 7. 8. Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Do not use this apparatus near water. Clean only with a dry cloth. Do not block any of the ventilation openings. Install in accordance with the manufacturers instructions. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. 10. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. 11. Only use attachments/accessories specified by the manufacturer. 12. Unplug this apparatus during lightning storms or when unused for long periods of time. 13. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

For the U.K. IMPORTANT: THE WIRES IN THIS MAINS LEAD ARE COLOURED IN ACCORDANCE WITH THE FOLLOWING CODE. BLUE: NEUTRAL BROWN: LIVE As the colours of the wires in the mains lead of this apparatus may not correspond with the coloured markings identifying the terminals in your plug, proceed as follows: The wire which is coloured BLUE must be connected to the terminal which is marked with the letter N or coloured BLACK. The wire which is coloured BROWN must be connected to the terminal which is marked with the letter L or coloured RED. Under no circumstances must either of the above wires be connected to the earth terminal of a three pin plug.

CUBE-30X_e.book 3

USING THE UNIT SAFELY
Used for instructions intended to alert the user to the risk of death or severe injury should the unit be used improperly. Used for instructions intended to alert the user to the risk of injury or material damage should the unit be used improperly. * Material damage refers other adverse effects respect to the home furnishings, as well animals or pets. to damage or caused with and all its to domestic
The symbol alerts the user to important instructions or warnings.The specific meaning of the symbol is determined by the design contained within the triangle. In the case of the symbol at left, it is used for general cautions, warnings, or alerts to danger. The symbol alerts the user to items that must never be carried out (are forbidden). The specific thing that must not be done is indicated by the design contained within the circle. In the case of the symbol at left, it means that the unit must never be disassembled. The symbol alerts the user to things that must be carried out. The specific thing that must be done is indicated by the design contained within the circle. In the case of the symbol at left, it means that the powercord plug must be unplugged from the outlet.
Before using this unit, make sure to read the instructions below, and the Owners Manual....
Do not open or perform any internal modifications on the unit....
Do not excessively twist or bend the power cord, nor place heavy objects on it. Doing so can damage the cord, producing severed elements and short circuits. Damaged cords are fire and shock hazards!....
Do not attempt to repair the unit, or replace parts within it (except when this manual provides specific instructions directing you to do so). Refer all servicing to your retailer, the nearest Roland Service Center, or an authorized Roland distributor, as listed on the Information page....
This unit, either alone or in combination with an amplifier and headphones or speakers, may be capable of producing sound levels that could cause permanent hearing loss. Do not operate for a long period of time at a high volume level, or at a level that is uncomfortable. If you experience any hearing loss or ringing in the ears, you should immediately stop using the unit, and consult an audiologist....

Never use or store the unit in places that are: Subject to temperature extremes (e.g., direct sunlight in an enclosed vehicle, near a heating duct, on top of heat-generating equipment); or are Damp (e.g., baths, washrooms, on wet floors); or are Humid; or are Exposed to rain; or are Dusty; or are Subject to high levels of vibration....
Do not allow any objects (e.g., flammable material, coins, pins); or liquids of any kind (water, soft drinks, etc.) to penetrate the unit.
Make sure you always have the unit placed so it is level and sure to remain stable. Never place it on stands that could wobble, or on inclined surfaces....
Immediately turn the power off, remove the power cord from the outlet, and request servicing by your retailer, the nearest Roland Service Center, or an authorized Roland distributor, as listed on the Information page when: The power-supply cord, or the plug has been damaged; or If smoke or unusual odor occurs Objects have fallen into, or liquid has been spilled onto the unit; or The unit has been exposed to rain (or otherwise has become wet); or The unit does not appear to operate normally or exhibits a marked change in performance....
The unit should be connected to a power supply only of the type described in the operating instructions, or as marked on the unit....

CUBE-30X_e.book 4

In households with small children, an adult should provide supervision until the child is capable of following all the rules essential for the safe operation of the unit....

Placement

Using the unit near power amplifiers (or other equipment containing large power transformers) may induce hum. To alleviate the problem, change the orientation of this unit; or move it farther away from the source of interference.
Protect the unit from strong impact. (Do not drop it!)....
This device may interfere with radio and television reception. Do not use this device in the vicinity of such receivers.
Do not force the units power-supply cord to share an outlet with an unreasonable number of other devices. Be especially careful when using extension cordsthe total power used by all devices you have connected to the extension cords outlet must never exceed the power rating (watts/amperes) for the extension cord. Excessive loads can cause the insulation on the cord to heat up and eventually melt through....
Noise may be produced if wireless communications devices, such as cell phones, are operated in the vicinity of this unit. Such noise could occur when receiving or initiating a call, or while conversing. Should you experience such problems, you should relocate such wireless devices so they are at a greater distance from this unit, or switch them off.
Before using the unit in a foreign country, consult with your retailer, the nearest Roland Service Center, or an authorized Roland distributor, as listed on the Information page....

Do not expose the unit to direct sunlight, place it near devices that radiate heat, leave it inside an enclosed vehicle, or otherwise subject it to temperature extremes. Also, do not allow lighting devices that normally are used while their light source is very close to the unit (such as a piano light), or powerful spotlights to shine upon the same area of the unit for extended periods of time. Excessive heat can deform or discolor the unit.
Do not put anything that contains water (e.g., flower vases) on this unit. Also, avoid the use of insecticides, perfumes, alcohol, nail polish, spray cans, etc., near the unit. Swiftly wipe away any liquid that spills on the unit using a dry, soft cloth....
When moved from one location to another where the temperature and/or humidity is very different, water droplets (condensation) may form inside the unit. Damage or malfunction may result if you attempt to use the unit in this condition. Therefore, before using the unit, you must allow it to stand for several hours, until the condensation has completely evaporated.
Do not allow rubber, vinyl, or similar materials to remain on the unit for long periods of time. Such objects can discolor or otherwise harmfully affect the finish.
Do not paste stickers, decals, or the like to this instrument. Peeling such matter off the instrument may damage the exterior finish.
Depending on the material and temperature of the surface on which you place the unit, its rubber feet may discolor or mar the surface. You can place a piece of felt or cloth under the rubber feet to prevent this from happening. If you do so, please make sure that the unit will not slip or move accidentally.
The unit should be located so that its location or position does not interfere with its proper ventilation....
Always grasp only the plug on the power-supply cord when plugging into, or unplugging from an outlet....
At regular intervals, you should unplug the power plug and clean it by using a dry cloth to wipe all dust and other accumulations away from its prongs. Also, disconnect the power plug from the power outlet whenever the unit is to remain unused for an extended period of time. Any accumulation of dust between the power plug and the power outlet can result in poor insulation and lead to fire.

CUBE-30X_e.book 5

Try to prevent cords and cables from becoming entangled. Also, all cords and cables should be placed so they are out of the reach of children....
Before cleaning the unit, turn off the power and unplug the power cord from the outlet....
Never climb on top of, nor place heavy objects on the unit....
Whenever you suspect the possibility of lightning in your area, pull the plug on the power cord out of the outlet....
Never handle the power cord or its plug with wet hands when plugging into, or unplugging from, an outlet....
The cooling vents on either side of the unit may become hot, so take care to avoid burns....

Before moving the unit, disconnect the power plug from the outlet, and pull out all cords from external devices....
Do not remove the speaker grille and speaker by any means. Speaker not user replaceable. Shock hazardous voltages and currents are present inside the enclosure.

IMPORTANT NOTES

In addition to the items listed under IMPORTANT SAFETY INSTRUCTIONS and USING THE UNIT SAFELY on pages 2, 3, 4 and 5, please read and observe the following:

Power Supply

Additional Precautions
Do not connect this unit to same electrical outlet that is being used by an electrical appliance that is controlled by an inverter (such as a refrigerator, washing machine, microwave oven, or air conditioner), or that contains a motor. Depending on the way in which the electrical appliance is used, power supply noise may cause this unit to malfunction or may produce audible noise. If it is not practical to use a separate electrical outlet, connect a power supply noise filter between this unit and the electrical outlet.
Use a reasonable amount of care when using the units buttons, sliders, or other controls; and when using its jacks and connectors. Rough handling can lead to malfunctions.
When connecting / disconnecting all cables, grasp the connector itselfnever pull on the cable. This way you will avoid causing shorts, or damage to the cables internal elements.
Before connecting this unit to other devices, turn off the power to all units. This will help prevent malfunctions and/or damage to speakers or other devices.
A small amount of heat will radiate from the unit during normal operation.
Although the LEDs are switched off when the POWER switch is switched off, this does not mean that the unit has been completely disconnected from the source of power. If you need to turn off the power completely, first turn off the POWER switch, then unplug the power cord from the power outlet. For this reason, the outlet into which you choose to connect the power cords plug should be one that is within easy reach and readily accessible.
To avoid disturbing your neighbors, try to keep the units volume at reasonable levels. You may prefer to use headphones, so you do not need to be concerned about those around you (especially when it is late at night).
When you need to transport the unit, package it in the box (including padding) that it came in, if possible. Otherwise, you will need to use equivalent packaging materials.

Maintenance

Use a cable from Roland to make the connection. If using some other make of connection cable, please note the following precautions. Some connection cables contain resistors. Do not use cables that incorporate resistors for connecting to this unit. The use of such cables can cause the sound level to be extremely low, or impossible to hear. For information on cable specifications, contact the manufacturer of the cable. Wrap the power cord around the cord hook when transporting or storing the unit.

For everyday cleaning wipe the unit with a soft, dry cloth or one that has been slightly dampened with water. To remove stubborn dirt, use a cloth impregnated with a mild, non-abrasive detergent. Afterwards, be sure to wipe the unit thoroughly with a soft, dry cloth.
Never use benzine, thinners, alcohol or solvents of any kind, to avoid the possibility of discoloration and/or deformation.

CUBE-30X_e.book 6

Panel descriptions

Control Panel

fig.01-01

1. INPUT Jack

Connect your guitar here.

BRIT COMBO

This is modeled on the Vox AC-30TB, the rock amplifier that created the Liverpool sound of the 60s. It can produce a broad range of sounds, from clean to overdrive, with increased distortion and greater power in the low-midrange when the amplifiers gain is boosted.

2. SELECT Switch

Switches between the CLEAN and LEAD channels. You can confirm which channel is selected by checking the indicators color (JC CLEAN: left; LEAD: right). Channels can be switched using optional BOSS FS-5U or FS-6 footswitches.
This is modeled on the vintage Tweed Fender Bassman 4x10 combo. The amplifiers four 10-inch speakers produce a clear upper-midrange with a fat low end, and its unique crunch tones make it a favorite of blues-rock guitarists.

3. TUNER Switch

The switch lights in red when the tuner function is on; the switch is unlit when the tuner is off. For more detailed information, refer to p. 8.

CLASSIC STACK

This is modeled on the sound and response of a Marshall JMP1987. The legendary JMP1987 is renowned for its smooth tone and presence-perfect for classic and hard rock.

JC CLEAN Channel

This is a model of Rolands famous JC-120 Jazz Chorus guitar amplifier. The ultra-clean, ultra-flat sound offers a smooth feel.

METAL STACK

This is modeled on the Peavey EVH-5150. This is the high gain amp, so even at low volumes, you can still get heavy distortion and sustain.

4. VOLUME Knob

Adjusts the JC CLEAN channel volume.

LEAD Channel

5. Type Switch
You can select from the following eight types. When the tuner function is on, you can use this to select the name of the string to be tuned (p. 8).

R-FIER STACK

This is modeled on the MESA/Boogie Rectifier. This super high gain amp is capable of producing slash metal, grunge, and a wide range of other lead sounds.

DYNA AMP

This is an original amp sound that lets the player create previously unobtainable tonal changes according to the picking strength. Soft picking produces a transparent clean amp sound, while hard picking results in a deeply distorted high-gain amp sound. Once the sound is distorted, the tone then changes according to the force used in picking, greatly expanding your range of expression.

ACOUSTIC

By combining acoustic guitar simulation with COSM amplifier modeling technology, this original amplifier model gives you a dynamic acoustic guitar sound using a standard electric guitar.

BLACK PANEL

This is modeled on the classic Fender Twin Reverb amplifier, used in a wide variety of musical styles, from country to blues, jazz and rock. Exhibiting rich lows and a bright high end.
Use of the RECORDING OUT/PHONES jack allows even better reproduction of the COSM-modeled sound.

CUBE-30X_e.book 7

* All product names mentioned in this document are trademarks or registered trademarks of their respective owners, and are not related to Roland Corporation. In this manual, these names are used as appropriate ways to indicate sounds that are simulated using COSM technology.

PHASER

This effect adds a variable phaseshifted signal to the direct sound, giving the sound a swirling character.

6. GAIN Knob

Adjusts the LEAD channels distortion level.

TREMOLO

Tremolo is an effect that creates a cyclic change in volume.

7. VOLUME Knob

Adjusts the LEAD channel volume.

EQUALIZER

8. BASS Knob
Adjusts the tone quality of the lower range.

DELAY/REVERB

12. DELAY/REVERB Knob
Turn this knob to DELAY or REVERB to switch to that effect.Turn the knob to adjust the amount of effect applied. * Graduations for DELAY, REVERB on a panel are for reference. Be sure to check the sound as you adjust the effects.

9. MIDDLE Knob

Adjusts the tone quality of the midrange.

10.TREBLE Knob

Adjusts the tone quality of the upper range. * Because COSM faithfully models the special features and characteristics of a variety of amplifiers; no sound will be produced when BASS, MIDDLE, and TREBLE knob are all set to 0 while the Type switch is set to BLACK PANEL or TWEED.
Turn the knob to change the time and amount of delay effects.

EFX (Effects)

11.EFX (Effects) Knob
Turn this knob to chorus, flanger, phaser, or tremolo to select the corresponding effect. Turn the knob to adjust the amount of effect applied. The ON indicator lights up when EFX is turned on, and goes out when EFX is turned off. You can also turn EFX on and off using optional footswitches (BOSS FS-5U or FS-6). * Graduations for CHORUS, FLANGER, PHASER, TREMOLO on a panel are for reference. Be sure to check the sound as you adjust the effects.

REVERB

Turn the knob to adjust the reverb level.
13. POWER SQUEEZER Switch
The switch lights in red when the power squeezer function is on; the switch is unlit when the power squeezer is off. Switching on the Power Squeezer function allows you to reduce the amps output to 2 watts. Switching this on allows you to produce a sound that preserves the same tone and balance as when the amp is played at maximum volume, but at an output of 2 watts, for volume levels that are more suitable for the average home. * The Power Squeezer function affects only sounds input through the INPUT jack. It has no effect on sounds input via the AUX IN jack.

CHORUS

In this effect, a slightly detuned sound is added to the original sound, giving the sound greater breadth and fullness.

FLANGER

This creates a flanging effect that creates a sort of spinning sensation with the sound.

CUBE-30X_e.book 8

14. AUX IN Jack
You can connect a CD player, MP3 player or other kind of device and have it play along with your guitar. This accepts a stereo miniature phone plug. However, the speaker and RECORDING OUT/PHONES output is monaural. * Determine the volume level by adjusting the volume control of the connected device.

TUNING

You can use manual tuning, whereby you switch to each individual string to tune it separately, and chromatic tuning, which automatically determines the closest pitch to that played by the string.

Tuning in Manual Mode

1. Press the TUNER switch. 2. Use the Type switch to select the name of the string you want to tune, then play a single note on the open string. * No sound is played through the units speaker while the tuner function is in use.
15. FOOT SW (Footswitch) Jack
You can use footswitches (optional BOSS FS-5U or FS-6) connected using a connection cable (optional Roland PCS-31) to switch channels (JC CLEAN/LEAD), and to turn EFX on and off.

PCS-31

Type Switch Position 6E 5A 4D 3G 2B 1E A
String Name Open sixth string Open fifth string Open fourth string Open third string Open second string Open first string Open fifth string (half step (semitone) down)

SELECT

Polarity Switch
* When you connect only one footswitch by mono cable, you can only use it to switch channels (JC CLEAN/LEAD).
Open fifth string (whole step (whole tone) down) A * Reference Pitch: A4=440 Hz
3. Tune the string until the green indicator lights. <The Pitch is flat> <The Pitch is flat, but almost in tune>
16. RECORDING OUT/PHONES Jack

When Using RECORDING OUT

Use mono 1/4 phone plugs when connecting to this jack. Volume level of RECORDING OUT can be easily adjusted if you set the CLEAN or LEAD channel VOLUME as shown in the diagram on the right.

* When the pitch is even lower, the indicator flashes. <The Pitch is correct>

When Using Headphones

Connect headphones to this jack. * No sound is played through the units speaker while the RECORDING OUT/PHONES jack is in use.
<The Pitch is sharp, but almost in tune>
<The Pitch is sharp>

17.POWER Switch

This switches the power on and off. * This unit is equipped with a protection circuit. A brief interval (a few seconds) after power up is required before the unit will operate normally. * If you need to turn off the power completely, first turn off the POWER switch, then unplug the power cord from the power outlet. Refer to Power Supply (p. 5). * When the pitch is even higher, the indicator flashes.

Tuning in Chromatic Mode

1. Hold down the TUNER switch for at least one second so that the red indicator flashes. 2. Play a single note on the open string you want to tune. 3. Tune the string until the green indicator lights.

CUBE-30X_e.book 9

Connections
Refer to the figure shown below to connect the CUBE-30X to other equipment.

fig.01-02

Footswitches
If using a FS-6 switch, set the MODE and POLARITY switches as shown below.

FS-6 FS-5U FS-5U FS-5U

Recorder
Stereo 1/4 phone plugs at both ends
CD/MP3 player Electric Guitar
Switching the Power On and Off
Once the connections have been completed, turn on power to your various devices in the order specified. By turning on devices in the wrong order, you risk causing malfunction and/or damage to speakers and other devices. 1. Make sure that all volume controls on the CUBE-30X and connected devices are set to 0. 2. Turn on all the devices connected to the CUBE-30X s input jacks (INPUT jack and AUX IN jack). 3. Turn on the CUBE-30X. 4. Switch on any equipment connected to the CUBE-30Xs RECORDING OUT/PHONES jack. 5. Adjust the volume levels for the devices. 6. Before switching off the power, lower the volume on each of the devices in your system and then TURN OFF the devices in the reverse order to which they were switched on. * This unit is equipped with a protection circuit. A brief interval (a few seconds) after power up is required before the unit will operate normally. For protection from sudden big sound, always make sure to have the volume level turned down before switching on power. Even with the volume all the way down, you may still hear some sound when the power is switched on and off, but this is normal, and does not indicate a malfunction.
945 * If you need to turn off the power completely, first turn off the POWER switch, then unplug the power cord from the power outlet. Refer to Power Supply (p. 5).
* To prevent malfunction and/or damage to speakers or other devices, always turn down the volume, and turn off the power on all devices before making any connections. * Before making the connections, be sure that the volume setting of the VOLUME knob for both amplifiers is set to 0.

* When connection cables with resistors are used, the volume level of equipment connected to the inputs may be low. If this happens, use connection cables that do not contain resistors, such as those from the Roland PCS series.

CUBE-30X_e.book 10

Sample Settings

Alternative Metal

The perfect sound for heavy, sharp riffs. Select the high-gain R-FIER amp, then use the equalizer to boost the low end even more. Used with a humbucking pickup in the rear position, it results in an extreme distortion effect. Plus, you can add a long delay to use this as a lead sound with great sustain.

SELECT : LEAD

Adding a short delay produces a doubling sound like that from two performers playing the same phrases simultaneously.

Space Clean

This is a transparent sound using spacial effects. Select the JC CLEAN amp, modeled on the Roland JC-120, then add chorus and long delay. Using this setting with a guitar equipped with single coil pickups makes great sounding arpeggios and chord strumming. Depending on the phrase being played, it can be effective to set the delay sounds delay time slightly slower than the phrases tempo.

SELECT: JC CLEAN

Classic Rock
This is a 70s-style rock sound. Turning up the gain produces a powerful rock sound in all riffs and solos. A powerful low end is a characteristic of the sound emitted by the surfaces of the cabinet, so you can turn up the equalizer knobs, especially the BASS knob, and increase to produce a sound with great punch. Turning down the GAIN knob is also a perfect way to get a sharp crunch sound.

Dynamic Style

DYNA AMP is an original amp that uses relative picking strength to create changes in distortion depth. First, adjust the GAIN knob so that a clean tone is obtained with soft picking and deep distortion is obtained when you pick hard. Now, mixing arpeggios played with a gentle touch along with firmly picked chords and solos results in a guitar sound with huge dynamics. Now, to create a broader, more open sound, cut the midrange and raise the low end.
Using this in combination with the EFX and delay and reverb creates a sound with an even greater feeling of scale.

CUBE-30X_e.book 11

Main Specifications

CUBE-30X

Rated Power Output

Power Consumption

Dimensions
385 (W) x 240 (D) x 380 (H) mm 15-3/16 (W) x 9-1/2 (D) x 15 (H) inches

Nominal Input Level

INPUT (JC CLEAN channel): -10 dBu/1 M AUX IN: -10 dBu

Weight

9.3 kg / 20 lbs 9 oz

Speakers

25 cm (10 inch)

Accessories

Controls
POWER Switch SELECT Switch TUNER Switch POWER SQUEEZER Switch <JC CLEAN Channel> VOLUME Knob <LEAD Channel> TYPE Switch (ACOUSTIC, BLACK PANEL, BRIT COMBO, TWEED, CLASSIC STACK, METAL STACK, R-FIER STACK) GAIN Knob VOLUME Knob <EQUALIZER> BASS Knob MIDDLE Knob TREBLE Knob <EFX> EFX Knob (CHORUS, FLANGER, PHASER, TREMOLO) <DELAY/REVERB> DELAY/REVERB Knob

Options

Footswitch: FS-5L (BOSS) FS-6 (BOSS) Connection Cable: PCS-31

* 0 dBu = 0.775 Vrms

In the interest of product improvement, the specifications and/or appearance of this unit are subject to change without prior notice.

Indicators

JC CLEAN Channel LEAD Channel EFX TUNER POWER SQUEEZER

Connectors

INPUT Jack AUX IN Jack FOOT SW Jack (SELECT, EFX) RECORDING OUT/PHONES Jack

Power Supply

AC 117 V, AC 230 V or AC 240 V

CUBE-30X_e.book 12

For EU Countries This product complies with the requirements of European Directives EMC 89/336/EEC and LVD 73/23/EEC.

For the USA

FEDERAL COMMUNICATIONS COMMISSION RADIO FREQUENCY INTERFERENCE STATEMENT
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. Unauthorized changes or modification to this system can void the users authority to operate this equipment. This equipment requires shielded interface cables in order to meet FCC class B Limit.