All Onboard Connectors List
Special Design Specification
Description Thermal Design Intel MTM technology, default read/write enabled CPU overheat (120oC) power off protection Compliant with Intel FMB 05A, 05B design Compliant with Intel 2006 TDP Slow boot-up fan speed design
Wake-Up Event Specification (Default Setting in BIOS)
S1 Power Button PS2 Keyboard/mouse USB Keyboard/mouse PME Modem (Ring) RTC Enabled Disabled Enabled Enabled Disabled Disabled S3 Enabled Disabled Enabled Enabled Disabled Disabled S4 Enabled n/a Disabled Enabled Disabled Disabled S5 Enabled n/a n/a Enabled Disabled Disabled

VRD 11

4 Phase PWM
Cedar Mill, Presler , Conroe & Allendale LGA775 Processor

Socket T

1066/800/533 FSB
Intel ADD2/+ Card or PCI Express x 16 External Graphics Card PCI Express x16 Port DDR2 533/667/800

CK-505 Clock

Channel A DDR2 DIMM1 DIMM2

VGA Connector

DDR2 533/667/800
Channel B DDR2 DIMM1 DIMM2

Broadwater

Back Panel
USB2.0 Port Lanes Direct Media Interface (DMI) Controller Link USB2.0 Port 1 USB2.0 Port 2 USB2.0 Port 3 PCI Express x1 port LAN NINEVEH LAN
1394a Port 1 TI43AB23 PCI I/F

SPI Flash (BIOS)

PCI Slot 1

PCI Express x1 port

PCI Slot 2

Front Panel

1394a Port 2

PCI Express x1

Slot 1

Header

USB2.0 Port 4

Serial ATA

LPC I/F

SATA Connector 1

AHCI, RAID0,1,5,10

USB2.0 Port 5

Block Diagram
USB2.0 Port 6 USB2.0 Port 7 USB2.0 Port 8 USB2.0 Port 9
SATA Connector 2 SATA Connector 3 SATA Connector 4

SATA Connector 5

ESATA Connector 6

ITE8718

Serial/LPT/KB/MS

Floppy Drive Connector

Super I/O

Firmware HUB

HDA Codec

Realtek ALC888

Main Board Placement
Item CPU_FAN1 COM2 J11 J10 PWR1 FLOPPY1 SYS_FAN1_1 CLR_CMOS OBR INTR1 FP1 TPM SATA_5 SATA_6 SATA_3 SATA_4 SATA_1 SATA_2 F_USB3 F_USB2 F_USB1 F_AUDIO1 BIOS_SEL1 PWR2 KB/MS1 COM1 PRT VGA 1394_USB1 NIC_USB Audio PCI-E1 BAT1 PCI-E2 F_1394 PCI1, PCI2 U25 U19 U13 U10 DIMM1, DIMM2, DIMM3, DIMM4 Chapter 1
Description CPU fan header COM header 2 Acer special requirement Acer special requirement 24-pin power connector Floppy connector 1 System fan header 1_1 (three-pin) Clear CMOS One button recovery Chassis intruder Front panel switch/LED Trusted platform module interface SATA data transfer connector 5 SATA data transfer connector 6 SATA data transfer connector 3 SATA data transfer connector 4 SATA data transfer connector 1 SATA data transfer connector 2 Front panel USB header 3 Front panel USB header 2 Front panel USB header 1 Audio Aux Input SPI & FWH BIOS select Four-pin power connector Keyboard & mouse PS2 port COM port Printer port VGA port 1394 and USB*2 port LAN and USB*2 port Audio port PCI-Express x16 connector Battery connector PCI-Express x1 connector Front 1394 header PCI connector FWH BIOS socket ICH8 series south bridge 965 series north bridge LGA 775 CPU socket DDR2 memory connector

12 Chapter 1

detach all peripherals (except the external Acer ODD, if your computer has one), including your Acer ezDock.
Acer eDataSecurity Management
Acer eDataSecurity Management is a handy file encryption utility that protects your files from being accessed by unauthorized persons. It is conveniently integrated with Windows explorer as a shell extension for quick and easy data encryption/decryption and also supports on-the-fly file encryption for MSN Messenger and Microsoft Outlook. The Acer eDataSecurity Management setup wizard will prompt you for a supervisor password and default encryption. This encryption will be used to encrypt files by default, or you can choose to enter your won file-specific password when encrypting a file.
Note: The password used to encrypt a file is the unique key that the system needs to decrypt it. If you
lose the password, the supervisor password is the only other key capable of decrypting the file. If you lose both passwords, there will be no way to decrypt your encrypted file. Be sure to safeguard all related passwords!
Acer ePerformance Management
Acer ePerformance Management is a system optimization tool that boosts the performance of your Acer notebook. It provides and expresses optimization method to release unused memory and disk space quickly. The user can also enable advanced options for full control over the following option:
Memory optimization: to releases unused memory and check usage Disk optimization: to remove unneeded items and files Speed optimization: to improve the usability and performance of your Windows XP system
Managements System backup to optical disk feature to burn a backup image to CD or DVD. To ensure the best results when recovering your system using a CD or Acer eRecovery Management, detach all peripherals (except the external Acer ODD, if your computer has one), including your Acer ezDock.

Acer eRecovery

Acer eRecovery is a tool to quickly backup and restore the system. Users can create and save a backup of the current system configuration to hard drive, CD, or DVD. Acer eRecovery consists of the following functions:
1. Create backup 2. Restore from backup 3. Create factory default image CD 4. Re-install bundled software without CD 5. Change Acer eRecovery password

Create Backup

Users can create and save backup images to hard drive, CD, or DVD. Please follow the steps below to create backup.
1. Boot to Windows XP. 2. Press <Alt> + <F10> to open the Acer eRecovery utility. 3. Enter the password to proceed. The default password is six zeros. 4. In the Acer eRecovery window, select Recovery settings and click Next. 5. In the Recovery settings window, select Backup snapshot image and click Next. 6. Select the backup method:
Use Backup to HDD to store the backup disc image on drive D:\ Backup to optical device to store the backup disc image on CD or DVD. This option is only available on systems that include an optical disc burner.

System Memory

Item Feature Specification The GMCH system memory controller directly supports one or two channels of memory (each channel consisting of 64 data lines). DDRII memory 533/667/800MHz support I/O voltage of 1.8V for DDRII Only unbuffered DIMMs support Max. memory bandwidth of 6.4GB/s in single channel or dual channel asymmetric mode, or 12.8GB/s in dual channel interleaved mode assuming DDRII 800MHz Four banks for all DDRII devices up to 512MB density support, eight banks for 1GB DDRII devices Using 256MB technology, min. 128MB memory capacity, assuming single channel mode Using 1GB technology dual channel interleaved mode, max. 8GB memory capacity Max. 8GB DRAM address decode space Up to 32 simultaneous open pages per channel support (assuming four banks of eight bank devices) Improved flexible memory architecture
Item Chip Feature ITE IT8718DX Meets LPC specification 1.0 PS/2 keyboard and PS/2 mouse support Up to four 3.5 disk drives support Two serial ports, one EPP/ECP parallel port support Three fans support (including fan speed control, speed monitoring inputs) IrDA 1.0 SIR protocol with maximum baud rate up to 115.2K bps Hardware monitor support Description

USB Interface

Item Chip Feature ICH8DH Eight USB 2.0 ports support Dual stack with RJ-45 back panel connector Dual stack with 1394 connector in rear side Two header supporting two USB ports for front panel cabling Description

Audio Interface

Item Chip Feature Description Realtek ALC888 (high definition audio) 48-pin LQFP green package High performance DACs with 95dB SNR (A-Weighting), ADCs with 85dB SNR (A-Weighting) Meets performance requirements for audio on PC2001 systems and Microsoft WLP 2.x Ten DAC channels 16/20/24bit PCM format support for 7.1 sound playback, plus two channels of independent stereo sound output (multiple streaming) through the front panel output Two stereo ADCs 16/20/24bit PCM format support, one for stereo microphone, one for legacy mixer recording All DACs 44.1/48/96/192KHz sample rate support 16/20/24bit S/PDIF out supports 44.1/48/96/192KHz sample rate. 16/20/24bit S/PDIF in supports 44.1/48/96KHz sample rate. Up to four channels of microphone array input are supported for AEC/BF application. High-quality analog differential CD input External PCBEEP input and built-in digital BEEP generator Reserve analog mixer architecture for backward compatibility with AC97 Wide range (-80dB ~ +42dB) volume control with 1.5dB resolution of analog to analog mixer gain Two GPIOs (General Purpose Input/Output) for customized applications Digital power support: 3.3V Analog power support: 3.5V ~ 5.25V Enhanced S/PDIF in circuitry ensures compatibility with consumer DVD players. Pin compatible with the ALC880 and ALC882

1394 Interface

Item Chip Feature TSB43AB23PDTG Compliant with the IEEE 1394-1995 Release 1.0 and support IEEE 1394a P2000 specifications with full 1394a P2000 Compliant with the PCI V2.2 specification and card bus interfaces support Three 1394a ports enable connections at 100/200/400Mbps Equipped with an OHCI compliant programming interface and I2C EEPROMs or four-wire serial ROMs Description

LAN Interface

Item Chip Feature Intel 82566 81-pin, 1.0 mm pitch, 10 mm x 10 mm FCMMAP (BGA) package IEEE 802.3ab compliant Robust end to end connections over various cable length Full duplex at 10/100/1000Mbps and half duplex at 10 or 100Mbps IEEE 802.3ab auto-negotiation with next page support 10/100 downshift: automatic link speed adjustment with poor quality cable Automatic MDI crossover Advanced cable diagnostics Footprint compatible with 82562V devices for a single-board dual design (Gigabit and 10/100) LCI interface for a very low power 10/100 link Gigabit LAN connect interface: low pin count, high speed interface with special low power idle modes and allows PHY placement proximity to I/O back panel Three LED outputs Clock supplied to MAC Full chip power down: lowest power state support Power consumption less than 1.16W Description
Hardware Monitor Function
Item Feature Description Smart fan control system, Thermal Cruise and Speed Cruise support Six VID input pins for CPU Vcore identification Two thermal inputs from optionally remote thermistors or 2N3904 transistors or Pentium 4 thermal diode output Four external voltage detect inputs Three intrinsic voltage monitoring (typical for Vbat, +5VSB, +5CC) Two fan speed monitoring inputs Two fan speed control (DC analog output) WATCHDOG comparison of all monitored items Overheat indication output Issue SMI#, IRQ, OVT# to activate system protection

BIOS ROM

Item Type Package Block Size Supply current Remark SST 39VF080 40-pin TSOP 64KB per block Active current: 15mA (typical) Standby current: 4uA (typical) The 32-pin PLCC package 1MB Flash ROM SST 39VF080 is used for BIOS, keyboard encoder and power controller codes. It occupies system memory area E0000-FFFFF. After posting system, the shadow RAM function will be enabled. Description

Item BIOS code programmer Version Feature Phoenix Award Phoenix BIOS 6.00 PG ROM type: flash ROM ROM size: 4MB Protocol supported: PCIX 1.0, PCI 2.2, APM 1.2, VESA/DPMS (VBE/PM V1.1), SMBIOS 2.3, E-IDE 1.1, ACPI 1.0b, ESCD 1.03, PnP 1.0a, Bootable CD-ROM 1.0 Boot from CD-ROM feature: yes LS-120 FDD drive support: yes BIOS boot block feature: yes Description
Note: The BIOS can be overwritten/upgraded by using the flash utility.

BIOS Hotkey List

Hotkey DEL Description To enter BIOS Setup Utility: press the DEL key while the system is booting to enter BIOS Setup Utility.

Environment Requirements

Item Temperature Operating Non-operating Humidity Operating Non-operating Vibration Operating Non-operating 5 ~ 500Hz, 2.20g RMS random, 10 minutes per axis in all three axes 5 ~ 500Hz, 1.09g RMS random, one hour per axis in all three axes 15% to 80% RH, non-condensing 10% to 90% RH, non-condensing at 40oC +5OC ~ +35OC -20OC ~ +60OC (storage packed), -10OC ~ +60OC (unpacked) Specification
Power Management Function (ACPI Support Function)

Device Standby Mode

Independent power management timer for hard disk drive devices (zero to 15 minutes, time step = one minute). Hard disk drive goes into Standby mode (for ATA standard interface). Disable V-sync to control the VESA DPMS monitor. Resume method: device activated (keyboard for DOS, keyboard & mouse for Windows). Resume recovery time: three to five seconds.

Global Standby Mode

Global power management timer (two to 120 minutes, time step = 10 minutes). Hard disk drive goes into Standby mode (for ATA standard interface). Disable H-sync and V-sync signals to control the VESA DPMS monitor. Resume method: return to original state by pushing external switch button, modem ring in, keyboard and mouse for APM mode. Resume recovery time: seven to 10 seconds.

Suspend Mode

Independent power management timer (two to 120 minutes, time step = 10 minutes) or pushing external switch button. CPU goes into SMM. CPU asserts STPCLK# and goes into the Stop Grant state. LED on the panel turns amber color. Hard disk drive goes into SLEEP mode (for ATA standard interface). Disable H-sync and V-sync signals to control the VESA DPMS monitor. Ultra I/O and VGA chip go into power saving mode. Resume method: return to original state by pushing external switch button, modem ring in, keyboard and mouse for APM mode. Return to original state by pushing external switch button, modem ring in and USB keyboard for ACPI mode.
ACPI specification 1.0b S0, S1, S3 and S5 sleep state support Onboard device power management support Onboard device configuration support

APIC Mode

This item allows you to enable or disable the APIC (Advanced Programmable Interrupt Controller) mode. APIC provides symmetric multi-processing (SMP) for systems.
MPS Version Control For OS
This item specifies which version of MPS (Multi-Processor Specification) this main board will use. Set this item for its default setting.

Silent Boot

This item enables or disables the Silent Boot function.

Configuration Table

This item enables or disables the Configuration Table in BIOS setting.
Advanced Chipset Features
These items define critical timing parameters of the main board. You should set these items for their default values unless you are very familiar with the technical specification of your system hardware. If you change the values incorrectly, you may introduce fatal errors or recurring instability into your system.

PEG / OnChip VGA Control

This item allows you to choose the primary display card.

OnChip Frame Buffer Size

This allows you to set the VGA frame buffer size.

DVMT Mode

DVMT is Dynamic Video Memory Technology. This item helps you select video mode.

Integrated Peripherals

OnChip IDE Device
Scroll to this item and press ENTER to enter the sub-menu shown as below.

IDE HDD Block Mode

Block mode is also called block transfer, multiple commands, or multiple sector read/write. If your IDE hard drive supports block mode, select Enabled for automatic detection of the optimal number of block read/write per sector the drive can support.

IDE DMA Transfer Access

This item allows you to enable the transfer access of the IDE DMA.
On-Chip Primary/Secondary PCI IDE
The integrated peripheral controller contains an IDE interface with support for two IDE channels. Select Enabled to activate each channel separately.
IDE Primary/Secondary Master/Slave PIO
Each IDE channel supports a master device and a slave device. These four items let you assign which kind of PIO (Programmed Input/Output) is used by IDE devices. Choose Auto to let the system auto detect which PIO mode is optimal, or select a PIO mode from zero to four.
IDE Primary/Secondary Master/Slave UltraDMA

This main board supports UltraDMA technology, which provides faster access to IDE devices. If you install a device that supports UltraDMA, you can change the item on this list to Auto. You

Chapter 2 36

may have to install the UltraDMA driver supplied with this main board in order to use an UltraDMA device.

Onboard Device

Scroll to this item and press Enter to enter the sub-menu shown as below.

USB Controller

You can enable or disable the onboard USB controller. We recommend users to keep the default value. Disabling it might cause the USB devices not to work properly.

USB 2.0 Support

This item enables or disables the onboard USB 2.0.

USB Keyboard Support

You can enable this item if you want to use a keyboard connected through the USB port in a legacy operating system (such as DOS) that does not support Plug and Play.

USB Mouse Support

You can enable this item if you want to use a mouse connected through the USB port in a legacy operating system (such as DOS) that does not support Plug and Play.

Onboard 1394

This item allows users to enable or disable the onboard 1394 function.

37 Chapter 2

Onboard LAN Controller
This item allows users to enable or disable the onboard LAN Controller function.

Onboard LAN Boot ROM

This item allows you to enable or disable the onboard LAN Boot ROM function.

Super I/O Device

Onboard FDC Controller
If your system has a floppy disk controller (FDC) installed on the system board and you want to use it, you can select Enabled. If you install an add-in FDC or the system has no floppy drive, select Disabled in this field.

Onboard Serial Port 1

This option is used to assign the I/O address and interrupt request (IRQ) for onboard serial port 1 (COM1).

Onboard Serial Port 2

This option is used to assign the I/O address and interrupt request (IRQ) for onboard serial port 2 (COM2).

Energy Lake Function

This item enables or disables the Energy Lake Function.

Wake Up On LAN

When it is Enabled, you can remotely wake up a PC in Soft-Off condition via a LAN card that supports the wake up function.

Power On by Ring

An input signal on the serial Ring indicator (RI) line (in other words, an incoming call on the modem) awakens the system from soft off state.
USB KB/MS Wake-up S1/S3/S4
This option allows the activity of the USB devices (keyboard and mouse) to wake up the system from S1/S3/S4 status.

PS2 KB/MS Wake-up S3

This option allows the activity of the PS2 keyboard and mouse to wake up the system from S3 status.

Resume by Alarm

When it is Enabled, additional fields become available and you can set the date, hour, minute and second to turn on your system. When it is set for zero in the column of date, the alarm will power on your system every day at the specified time.

PnP/PCI Configurations

It configures how PnP (Plug and Play) and PCI expansion cards operate in your system. Both the ISA and PCI buses on the main board use system IRQs (interrupt requests) and DMAs (direct memory access). You must set up the IRQ and DMA assignments correctly through the PnP/PCI Configurations Setup Utility for the main board to work properly. Selecting PnP/PCI Configurations on the main program screen displays the menu below.

PCI/VGA Palette Snoop

This item is designed to overcome problems that can be caused by some non-standard VGA cards. This board includes a built-in VGA system that does not require palette snooping so you must leave this item disabled.

Maximum Payload Size

This item specifies the maximum TLP payload size for the PCE Express devices.

PC Health Status

On the main board that supports hardware monitoring, you can monitor the parameters of critical voltage, temperature and fan speed.
Advanced Fan Control This item incorporates linear control metrics to provide optimal cooling. Under normal condition, Advanced Fan Control keeps the fan speed low, minimizing acoustic noise. When the load increases, Advanced Fan Control increases the fan speed to provide optimal cooling.

Frequency Control

It enables you to set the clock speed and system bus for your system. The clock speed and system bus are determined by the processor you have installed in your system.

CPU Clock Ratio

This item allow you to adjust the CPU clock to 200MHz. You can key in the number within the range to make a precise and ideal adjustment.

System Board Jumper Setting
Features Intruder pin (1*2) & default setting BIOS_SEL1 (1*2) & default setting Clear CMOS (1*3) & default setting OBR (1*2) & default setting Default Setting No active Remark (color and other) Short will have the warning message The case has been opened, press F1 to continue.
Enable SPI 2-3: normal (default) No active
System Board Header Setting
FPOrange1 Orange3 Blue5 Blue7 Black9 Orange11 Green12 Orange13 Green14 Header_2X7_K14 Green2 Green4 Red6 Red8
Pin Definition 5V_SYS GPIO_GRN_HDR_R HDD_LED_R GPIO_YLW_HDR_R GND PSIN ICH_SYS_RSTJ GND 5V_SYS Key NC GND NC LAN_ACTJ
Description Hard disk LED pull-up (330 ohm) to 5V_SYS Pull-up (330 ohm) to 5V_SB_SYS and connect To to SIO GPIO Hard disk active LED Pull-up (330 ohm) to 5V_SB_SYS and connect to SIO GPIO Reset button Power button ICH_SYS_RSTJ Ground 5V_SYS Key Reserved Ground Reserved LAN active LED

Front USB

# 9 10
Pin Definition VREG_FP_USBPWR0 VREG_FP_USBPWR0 USB_FP_P0USB_FP_P1USB_FP_P0+ USB_FP_P1+ GND GND Key USB_FP_OC0
Description Front panel USB power (ports 0 & 1) Front panel USB power (ports 0 & 1) Front panel USB port 0 negative signal Front panel USB port 1 negative signal Front panel USB port 0 positive signal Front panel USB port 1 positive signal Ground Ground Key Front panel USB over current signal (port 0 & 1)

Front Audio (AC97)

Pin Definition AUD_MIC AUD_GND AUD_MIC_BIAS AUD_VCC AUD_FPOUT_R AUD_RET_R HP_ON Key AUD_FPOUT_L AUD_RET_L
Description Front panel microphone input signal Ground used by analog audio circuits Microphone power Filtered +5V used by analog audio circuits Right channel audio signal to front panel Right channel audio signal return from front panel RSVD for future use to control headphone amplifier No pin Left channel audio signal to front panel Left channel audio signal return from front panel

Front 1394

Signal Name TPA+ TPAGround Ground TPB+ TPB+12V (fused) +12V (fused) Key Ground

AUX_IN

Description CD left channel Ground Ground CD right channel Key

System Fan

DESCRIPTION ST3200827AS ST3250824AS ST3300822AS ST3400833AS WD2000JS-22NCB1 WD2500JS-22NCB1 HDT725032VLA380 HDT725040VLA380
ACER PART NO. KH.20001.007 KH.25001.005 KH.30001.008 KH.40001.005 KH.20008.019 KH.25008.015 KH.32007.001 KH.40007.006
KB.9610B.045 KB.9610B.046 KB.9610B.047 KB.9610B.048 KB.9610B.049 KB.9610B.050 KB.9610B.051 KB.9610B.052 KB.9610B.053
SK-9610 SK-9610 SK-9610 SK-9610 SK-9610 SK-9610 SK-9610
KB.9610B.054 KB.9610B.055 KB.9610B.056 KB.9610B.057 KB.9610B.058 KB.9610B.059 KB.9610B.060
PARTNAME USB KEYBOARD SK-9610 DUTCH VER. 105KS (WITH EKEY VISTA) ROHS USB KEYBOARD SK-9610 SWISS VER. 105KS (WITH EKEY VISTA) ROHS USB KEYBOARD SK-9610 BELGIUM VER. 105KS (WITH EKEY VISTA) ROHS USB KEYBOARD SK-9610 ICELAND VER. 105KS (WITH EKEY VISTA) ROHS USB KEYBOARD SK-9610 NORWEGIAN VER. 105KS (WITH EKEY VISTA) ROHS USB KEYBOARD SK-9610 HEBREW VER. 104KS (WITH EKEY VISTA) ROHS USB KEYBOARD SK-9610 POLISH VER. 105KS (WITH EKEY VISTA) ROHS USB KEYBOARD SK-9610 SLOVENIAN VER. 105KS (WITH EKEY VISTA) ROHS USB KEYBOARD SK-9610 SLOVAKIAN VER. 105KS (WITH EKEY VISTA) ROHS USB KEYBOARD SK-9610 TURKEY QTYPE VER. 105KS (WITH EKEY VISTA) ROHS USB KEYBOARD SK-9610 RUSSIAMVER. 104KS (WITH EKEY VISTA) ROHS USB KEYBOARD SK-9610 HUNGARIA VER. 105KS (WITH EKEY VISTA) ROHS USB KEYBOARD SK-9610 GREEK VER. 104KS (WITH EKEY VISTA) ROHS USB KEYBOARD SK-9610 DENMARK VER. 105KS (WITH EKEY VISTA) ROHS USB KEYBOARD SK-9610 CZECH VER. 104KS (WITH EKEY VISTA) ROHS USB KEYBOARD SK-9610 ROMANIAN VER. 105KS (WITH EKEY VISTA) ROHS USB KEYBOARD SK-9610 TURKEY FTYPE VER. 105KS (WITH EKEY VISTA) ROHS USB KEYBOARD SK-9610 FRENCH+ARABIC 105KS (WITH EKEY VISTA) ROHS USB KEYBOARD SK-9610 SPANISH LATIN VER. 105KS(WITH EKEY VISTA) ROHS USB KEYBOARD SK-9610 ITALIAN VER. S1 105KS (WITH EKEY) ROHS USB KEYBOARD SK-9610 ITALIAN VER. S1 105KS (WITH EKEY VISTA) ROHS USB KEYBOARD KU-0355 US VER. 104KS(WITH EKEY VISTA) ROHS USB KEYBOARD KU-0355 T.CHINESE VER. 104KS(WITH EKEY VISTA) ROHS SK-9610 SK-9610 SK-9610 SK-9610 SK-9610 SK-9610 SK-9610 SK-9610 SK-9610 SK-9610

DESCRIPTION

ACER PART NO. KB.9610B.061 KB.9610B.062 KB.9610B.063 KB.9610B.064 KB.9610B.065 KB.9610B.066 KB.9610B.067 KB.9610B.068 KB.9610B.069 KB.9610B.070
KB.9610B.071 KB.9610B.072 KB.9610B.073 KB.9610B.074 KB.9610B.075 KB.9610B.076 KB.9610B.077

SK-9610

KB.9610B.078

KB.9610B.079

SK-9610 SK-9610 KU-0355 KU-0355
KB.USB0B.002 KB.USB0B.001 KB.KUS03.222 KB.KUS03.223
PARTNAME USB KEYBOARD KU-0355 S.CHINESE 104KS(WITH EKEY VISTA) ROHS USB KEYBOARD KU-0355 INL US VER. 104KS(WITH EKEY VISTA) ROHS USB KEYBOARD KU-0355 ARABIC VER. 104KS(WITH EKEY VISTA) ROHS USB KEYBOARD KU-0355 THAI VER. 104KS(WITH EKEY VISTA) ROHS USB KEYBOARD KU-0355 SPANISH VER. 105KS(WITH EKEY VISTA) ROHS USB KEYBOARD KU-0355 CANADIAN/ FRENCH VER. 105KS(WITH EKEY VISTA) ROHS USB KEYBOARD KU-0355 BRAZILIAN VER. 107KS(WITH EKEY VISTA) ROHS USB KEYBOARD KU-0355 JPNESE 109KS(WITH EKEY VISTA) ROHS USB KEYBOARD KU-0355 FRENCH VER. 105KEYS (WITH EKEY VISTA) ROHS USB KEYBOARD KU-0355 SPANISH LATIN VER. 105KS(WITH EKEY VISTA) ROHS USB KEYBOARD KU-0355 US VER. 104KS JPN ABS(WITH EKEY VISTA) ROHS USB KEYBOARD KU-0355 INL US VER. 104KS JPN ABS(WITH EKEY VISTA) ROHS USB KEYBOARD KU-0355 ARABIC VER. 104KS JPN ABS(WITH EKEY VISTA) ROHS USB KEYBOARD KU-0355 GERMANY VER. 105KS JPN ABS(WITH EKEY VISTA) ROHS USB KEYBOARD KU-0355 ITALIAN VER. 105KS JPN ABS(WITH EKEY VISTA) ROHS USB KEYBOARD KU-0355 FRENCH VER. 105KS JPN ABS(WITH EKEY VISTA) ROHS USB KEYBOARD KU-0355 SWEDEN VER. 105KS JPN ABS(WITH EKEY VISTA) ROHS USB KEYBOARD KU-0355 UK VER. 105KS JPN ABS(WITH EKEY VISTA) ROHS USB KEYBOARD KU-0355 SPANISH VER. 105KS JPN ABS(WITH EKEY VISTA) ROHS USB KEYBOARD KU-0355 DUTCH VER. 105KS JPN ABS(WITH EKEY VISTA) ROHS Chapter 6 KU-0355 KU-0355 KU-0355 KU-0355 KU-0355 KU-0355
ACER PART NO. KB.KUS03.224 KB.KUS03.225 KB.KUS03.226 KB.KUS03.227 KB.KUS03.228 KB.KUS03.230
KU-0355 KU-0355 KU-0355 KU-0355
KB.KUS03.231 KB.KUS03.232 KB.KUS03.262 KB.KUS03.264

KU-0355

KB.KUS03.233

KB.KUS03.234

KB.KUS03.235

KB.KUS03.236

KB.KUS03.237

KB.KUS03.238

KB.KUS03.239

KB.KUS03.240

KB.KUS03.241

KB.KUS03.242

PARTNAME USB KEYBOARD KU-0355 PORTUGESE VER. 105KS JPN ABS(WITH EKEY VISTA) ROHS USB KEYBOARD KU-0355 SWISS VER. 105KS JPN ABS(WITH EKEY VISTA) ROHS USB KEYBOARD KU-0355 BELGIUM VER. 105KS JPN ABS(WITH EKEY VISTA) ROHS USB KEYBOARD KU-0355 ICELAND VER. 105KS JPN ABS(WITH EKEY VISTA) ROHS USB KEYBOARD KU-0355 NORWEGIAN VER. 105KS JPN ABS(WITH EKEY VISTA) ROHS USB KEYBOARD KU-0355 HEBREW VER. 104KS JPN ABS(WITH EKEY VISTA) ROHS USB KEYBOARD KU-0355 POLISH VER. 105KS JPN ABS(WITH EKEY VISTA) ROHS USB KEYBOARD KU-0355 SLOVENIAN VER. 105KS JPN ABS(WITH EKEY VISTA) ROHS USB KEYBOARD KU-0355 SLOVAKIAN VER. 105KS JPN ABS(WITH EKEY VISTA) ROHS USB KEYBOARD KU-0355 TURKEY VER. 105KS JPN ABS(WITH EKEY VISTA) ROHS USB KEYBOARD KU-0355 RUSSIAMVER. 104KS JPN ABS(WITH EKEY VISTA) ROHS USB KEYBOARD KU-0355 HUNGARIA VER. 105KS JPN ABS(WITH EKEY VISTA) ROHS USB KEYBOARD KU-0355 GREEK VER. 104KS JPN ABS(WITH EKEY VISTA) ROHS USB KEYBOARD KU-0355 DENMARK VER. 104KS JPN ABS(WITH EKEY VISTA) ROHS USB KEYBOARD KU-0355 CZECH VER. 104KS JPN ABS(WITH EKEY VISTA) ROHS USB KEYBOARD KU-0355 ITALIAN NEW LAYOUT 105KS JPN ABS(WITH EKEY VISTA) ROHS USB KEYBOARD KU-0355 ROMANIAN VER. 105KS JPN ABS(WITH EKEY VISTA) ROHS KU-0355

Y-RAJ56A Y-RAJ56A Y-RAJ56A
KB.CCN04.057 KB.CCN04.087 KB.CCN04.088
Y-RAJ56A Y-RAJ56A Y-RAJ56A Y-RAJ56A Y-RAJ56A Y-RAJ56A
KB.CCN04.089 KB.CCN04.090 KB.CCN04.091 KB.CCN04.092 KB.CCN04.093 KB.CCN04.094
PARTNAME WIRELESS KB COCOON SWEDEN VER. 105 KEYS(WITH EKEY VISTA) ROHS WIRELESS KB COCOON SPANISH VER. 105 KEYS(WITH EKEY VISTA) ROHS WIRELESS KB COCOON UK VER. 105 KEYS(WITH EKEY VISTA) ROHS WIRELESS KB COCOON SWISS VER. 105 KEYS(WITH EKEY VISTA) ROHS WIRELESS KB COCOON BELGIUM VER. 105 KEYS(WITH EKEY VISTA) ROHS WIRELESS KB COCOON CZECH VER. 104 KEYS(WITH EKEY VISTA) ROHS WIRELESS KB COCOON RUSSIAN VER. 105 KEYS(WITH EKEY VISTA) ROHS WIRELESS KB COCOON DENMARK VER. 105 KEYS(WITH EKEY VISTA) ROHS WIRELESS KB COCOON DUTCH VER. 105 KEYS(WITH EKEY VISTA) ROHS WIRELESS KB COCOON PORTUGESE VER. 105 KEYS(WITH EKEY VISTA) ROHS WIRELESS KB COCOON SLOVAK VER. 105 KEYS(WITH EKEY VISTA) ROHS WIRELESS KB COCOON ICELAND VER. 105 KEYS(WITH EKEY VISTA) ROHS WIRELESS KB COCOON NORWEGIAN VER. 105 KEYS(WITH EKEY VISTA) ROHS WIRELESS KB COCOON HEBREW VER. 105 KEYS(WITH EKEY VISTA) ROHS WIRELESS KB COCOON POLISH VER. 105 KEYS(WITH EKEY VISTA) ROHS WIRELESS KB COCOON SLOVENIAN VER. 105 KEYS(WITH EKEY VISTA) ROHS WIRELESS KB COCOON TURKEY VER. 105 KEYS(WITH EKEY VISTA) ROHS WIRELESS KB COCOON HUNGARIA VER. 105 KEYS(WITH EKEY VISTA) ROHS WIRELESS KB COCOON GREEK VER. 104 KEYS(WITH EKEY VISTA) ROHS WIRELESS KB COCOON CANADIAN/ FRENCH VER. 105 KEYS(WITH EKEY VISTA) ROHS MEMORY "DDR256MB, 32MX64,HYS64T32000HU-3.7-B (0.09U), ROHS" "DDR512MB,NT512T64U88A0BY37B(PB-FREE)" Chapter 6 Y-RAJ56A Y-RAJ56A Y-RAJ56A Y-RAJ56A Y-RAJ56A Y-RAJ56A Y-RAJ56A Y-RAJ56A Y-RAJ56A Y-RAJ56A
ACER PART NO. KB.CCN04.095 KB.CCN04.096 KB.CCN04.097 KB.CCN04.098 KB.CCN04.099 KB.CCN04.100 KB.CCN04.101 KB.CCN04.102 KB.CCN04.103 KB.CCN04.104
KB.CCN04.105 KB.CCN04.106 KB.CCN04.107
KB.CCN04.108 KB.CCN04.109 KB.CCN04.110
KB.CCN04.111 KB.CCN04.112
KB.CCN04.113 KB.CCN04.114

HYS64T32000HU-3.7-B

KN.25602.033

NT512T64U88A0BY-37B

KN.51203.021
PARTNAME "DDR1024MB,NT1GT64U8HA0BY-37B (PBFREE)" "HYNIX DDR256MB,HYMP532U64BP6-C4 (0.09UM)" "HYNIX DDR512MB,HYMP564U64BP8-C4 (0.09UM)" MOUSE "USB OPTICAL MOUSE, N12ROU, ROHS" "USB OPTICAL MOUSE, MUV ACR1, W/ STK LABEL, ROHS" "LOGITECH WIRELESS MOUSE, MRAU95, ROHS" POWER SUPPLY POWER SUPPLY FSP ATX-250PA(1) (NON-PFC) (250W) POWER SUPPLY FSP ATX-250PA(1PF) (PFC) (250W) SPEAKER "JS 2.0 SPEAKER, USB, M-1118B, ACER LOGO,ROHS" N12ROU