Mainboard Diagram

P4M2PROC-P
- Fully Support Intel LGA 775 Core 2 Duo CPU - VIA P4M800 Pro+ VT8237R - Support FSB 1066 / 800 / 533 MHz - Integrated S3 Graphics UniChrome Pro Processor - Single Channel DDRII 400/533 Memory DIMMs - 1 AGP 8X and 3 32-bit PCI Slots Design - Support 4 IDE and 2 Serial ATA Devices with RAID - Support RAID 0, 1 (S-ATA) - 8 USB2.0 Connectors Embedded - ACChannel Audio CODEC - VIA 10/100 LAN Supported - Micro ATX
Features and Benefits LGA775 Intel Core 2 Duo E Series 65nm Processor with Shared 4MB L2 Cache Supported
Innovative design which meets the worlds most advanced 65 nanometer Chip-Making Process technology based Intel Core 2 Duo E6700, E6600, E6400, E6300, E4200 and beyond Processors with and embedded 4MB / 2MB L2 Cache for demanding usage of Home Networking and Game Enthusiasts.
VIA P4M800 Pro Chipset and VT8237R Chipset deliver the Reliability and I/O Flexibility
Optimized to deliver a great Hi-Def visual experience when playing digital video content, the VIA P4M800 Pro chipset supports the latest platform technologies such as Dual Core processors, 1066 MHz FSB, and DDR2. By harnessing the advanced VIA StepUp memory controller technology, motherboards based on the VIA P4M800 Pro can support DDR2 memory modules providing users the flexibility to use whatever memory standard best suits their requirements. The VIA P4M800 Pro features a high bandwidth V-Link bus to allow communication between the chipsets North and South bridges at 533MB/sec. When combined with VIA VT8237R South Bridge and a broad array of VIA companion chips, the VIA P4M800 Pro provides a comprehensive range of storage, multimedia and connectivity features, including native Serial ATA and V-RAID, 6-channel VIA Audio, VIA 10 / 100 Ethernet, and USB2.0. Leveraging an advanced shared memory architecture, the VIA P4M800 Pro utilizes the S3 Graphics UniChrome Pro Integrated Graphics Processor (IGP) ensuring optimal performance for all multimedia, entertainment, and productivity applications. With an internal data flow equivalent to the latest AGP 8X graphics cards, a 200MHz 2D/3D graphics engine features dedicated 128-bit data paths for pixel data flow and texture/command access.
Pro Magic Plus System Recovery Software Embedded
It provides complete system protection for your computer, no matter whether it is virus infection, system disorder or confusion, or data damage. Restore important data back right away, allowing your system to be operated under a safe environment. This amazing software not only provides convenient instant restoration, but also brings data back to the preferred state at any specific time point as you wish. Moreover, it combines several other functions such as anti-virus, backup software, uninstall software, multi-booting etc. to satisfy your needs of all sorts of system protections. No more worries on new virus or system failure.
Image IT System Back-up Software Embedded
Image It can help you backup the whole system and data, and restore them instantly whenever the data on HD is destroyed, or even the HD partitions have been lost. You can also record the image file on a CD, and restore your system in an easily way. You neednt worry about the complex instruction.

Rear I / O

Mainboard Specifications
CPU LGA 775 Socket for FSB 1066 / 800 / 533 MHz Intel Core 2 Duo E Series Processor With 4MB Shared L2 Cache (Code Name: Conroe) Chipset Memory Expansion Slots Storage VIA P4M800PRO North Bridge Chipset + VT8237R South Bridge Chipset 2 * 240-pin DIMM Sockets for unbuffered DDRII 400 / 533 SDRAM up to 2 GB 3 * 32-bit PCI Slots / 1 * AGP 8X 4 * Ultra DMA 133 / 100 / 66 / 33 Embedded VIA VT8237R Chipset Supports 2 Serial ATA HDDs with RAID Functions. Support RAID 0, RAID 1 (S-ATA) VIA VT1617A 6-Channel AC97 Audio CODEC VIA VT/ 100 LAN PHY Embedded 8 * High Speed USB @ 480 Mbit / s Integrated VIA S3 Graphics UniChrome Pro Integrated Graphics Processor IMAGE IT! System Backup Software and ProMagicPLUS! System Recovery System 4 * High Speed USB Connectors @ 480 Mbit / s 1 * D-Sub 15-pin VGA Connector 1 * Serial Port 1 * PS / 2 Mouse & 1 * PS/2 Keyboard 1 * RJ45 Connector 1 * Audio I / O 2 * High Speed USB Connectors @ 480 Mbit / s for 4 USB 2.0 Ports CPU / Chassis Fan Connectors 1 * 12V 4-pin ATX Power Connector and 1 * 24-pin ATX Power Connector CD / AUX Audio in 1* Serial Port 9-pin Block Award 4 MB Flash ROM Micro ATX Form Factor

P4M800 Pro-M7
FCC Information and Copyright
This equipment has been tested and found to comply with the limits of a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. There is no guarantee that interference will not occur in a particular installation.
The vendor makes no representations or warranties with respect to the contents here and specially disclaims any implied warranties of merchantability or fitness for any purpose. Further the vendor reserves the right to revise this publication and to make changes to the contents here without obligation to notify any party beforehand. Duplication of this publication, in part or in whole, is not allowed without first obtaining the vendors approval in writing.
The content of this users manual is subject to be changed without notice and we will not be responsible for any mistakes found in this users manual. All the brand and product names are trademarks of their respective companies.

Table of Contents

Chapter 1: Introduction.. 1
1.1 1.2 1.3 Features.... 1 Package List.... 3 Layout... 4

Chapter 2:

2.1 2.2 2.3 2.4
Hardware Installation.. 5
Installing Central Processing Unit (CPU).. 5 FAN Headers... 7 Installing System Memory.. 8 Connectors and Slots... 9

Chapter 3:

3.1 3.2
Headers & Jumpers Setup.. 12
How to Setup Jumpers... 12 Detail Settings... 12
Chapter 4: Useful Help.. 18
4.1 4.2 4.3 Award BIOS Beep Code... 18 Extra Information... 18 Troubleshooting.... 20
Chapter 5: WarpSpeeder.. 21
5.1 5.2 5.3 5.4 Introduction... 21 System Requirement... 21 Installation.... 22 [WarpSpeeder] includes 1 tray icon and 5 panels. 23

CHAPTER 1: INTRODUCTION

1.1 FEATURES
Supports LGA 775. Supports Intel Pentium 4 processor up to 3.8GHz. Supports Dual Core CPU. Front side bus at the following frequency ranges: 400MHz (100MHz Core Clock) 533MHz (133MHz Core Clock) 800MHz (200MHz Core Clock) 1066MHz (266MHz Core Clock) Supports Hyper-Threading Technology.
WARNING! Warranty will be void if the pin protection cap is not in place to protect the socket pin when sending this mainboard for service.

Chipset

North Bridge: VIA P4M800 Pro. South Bridge: VIA VT8237R PLUS.

Dimension

Micro ATX Form Factor: 24.38cm (L) x 20.17cm (W)

Operating Systems

Supports Windows 2000 and Windows XP.
Note: Does not support Windows 98SE and Windows ME.

Main Memory

Supports up to two DDR2 devices. Supports DDR2-400/533. Maximum memory size is up to 2GB. (Following table is only for reference.)
DIMM Socket Location DDR_A1 DDR_A2 DDR Module 64MB/128MB/256MB/512MB/1GB *1 64MB/128MB/256MB/512MB/1GB *1 Total Memory Size Max is 2GB.

Super I/O

Chip: ITE IT8705AF Provides the most commonly used legacy super I/O functionality. Environment Control initiatives: H/W Monitor. Fan Speed Controller. ITE Smart Guardian function.

On Board IDE

Support 4 IDE disk drives. Supports PIO Mode 0~4. Supports Ultra DMA 33/66/100/133 Bus Master Mode.

10/100 LAN PHY

PHY: RealTek RTL8201BL/RTL8201CL. Supports 10/100 Mb/s auto-negotiation operation. Half/Full duplex capability. Supports ACPI, PCI power management.

Serial ATA

Integrated in VT8237R PLUS. Supports RAID 0 and RAID 1 functions. Supports 2 serial ATA (SATA) ports. Compliant with SATA Version 1.0 specification. Data transfer rates up to 150 MB/s.

Onboard AC97 Sound Codec

Chip: ALC655 Supports 6 channels. Supports S/PDIF out function. Compliant with AC97 Version 2.3 specification.
3 PCI bus master slots. 1 AGP 4x/8x compatible slot. 1 CNR slot.
Front Side Onboard Peripherals
1 front panel header supports front panel facilities. 1 S/PDIF out connector supports digital audio out function. 1 CD-in connector supports 1 CD-ROM audio-in device. 1 front audio header supports front panel audio function. 1 chassis open header supports PC case-opened warning function. 1 Floppy port supports 2 FDD with 360K, 720K, 1.2M, 1.44M and 2.88Mbytes. 2 USB headers support 4 USB 2.0 ports. 2 IDE connectors support 4 hard disk devices. 2 serial ATA connectors support 2 SATA devices.

Rear Side Connectors

4 USB 2.0 ports. 1 VGA port. 1 Serial port. 1 Printer port. 1 RJ-45 LAN jack. 1 PS/2 Mouse & Keyboard port. 1 vertical audio port including 1 line-in connector, 1 line-out connector, and 1 MIC-in connector.
LAN PS/2 Mouse Printer Port Line In/ Surround Line Out VGA PS/2 Keyboard COM USB x2 USB x2 Mic In 1/ Bass/Center

PACKAGE LIST

FDD cable x1 HDD cable x1 Users Manual x1 Fully Setup Driver CD x1 Rear I/O panel for ATX case x1 USB 2.0 cable x1 (optional) Serial ATA cable x2 (optional) S/PDIF out cable x1 (optional)

P4M800 Pro-M7 1.3

JKBMS1

JCFAN1

LAYOUT

JATXPWR1

JSATA2 JSATA1 JCMOS1 JCI1

JATXPWR2

LGA775

JPRNT1

DDR2_A2

JUSBV1

JUSB2 JUSB3

JUSBLAN1

JAUDIO1
JFAUDIO1 JCDIN1 JAUX1 (optional)

JSPDIFO1 JUSBV2

VT8237R PLUS

JSFAN1 JPANEL1

Note: represents the 1 pin.

P4M800 Pro

DDR2_A1
CHAPTER 2: HARDWARE INSTALLATION
2.1 INSTALLING CENTRAL PROCESSING UNIT (CPU)

Special Notice:

Remove Pin Cap before installation, and make good preservation for future use. When the CPU is removed, cover the Pin Cap on the empty socket to ensure pin legs wont be damaged.

Pin Cap

Step 1: Pull the socket locking lever out from the socket and then raise the lever up to a 90-degree angle.
Step 2: Look for the triangular cut edge on socket, and the golden dot on CPU should point forwards this triangular cut edge. The CPU will fit only in the correct orientation. Step 2-1:

Step 2-2:

Step 3: Hold the CPU down firmly, and then lower the lever to locked position to complete the installation.
Step 4: Put the CPU Fan and heatsink assembly on the CPU and buckle it on the retention frame. Connect the CPU FAN power cable into the JCFAN1. This completes the installation.
P4M800 Pro-M7 2.2 FAN HEADERS These fan headers support cooling-fans built in the computer. The fan cable and connector may be different according to the fan manufacturer. Connect the fan cable to the connector while matching the black wire to pin#1.

JCFAN1: CPU Fan Header

Pin 3 4
Assignment Ground Power (+12V) FAN RPM rate sense Smart Fan Control
JSFAN1: System Fan Header
Assignment Ground Power (+12V) FAN RPM rate sense
The JCFAN1 reserves system cooling fan with Smart Fan Control utility. It supports 4-pin head connector. When connecting with wires onto connectors, please note that the red wire is the positive and should be connected to pin#2, and the black wire is Ground and should be connected to GND.

P4M800 Pro-M7 2.3 INSTALLING SYSTEM MEMORY
Unlock a DIMM slot by pressing the retaining clips outward. Align a DIMM on the slot such that the notch on the DIMM matches the break on the Slot.
Insert the DIMM vertically and firmly into the slot until the retaining chip snap back in place and the DIMM is properly seated.
P4M800 Pro-M7 2.4 CONNECTORS AND SLOTS
FDD1: Floppy Disk Connector
The motherboard provides a standard floppy disk connector that supports 360K, 720K, 1.2M, 1.44M and 2.88M floppy disk types. This connector supports the provided floppy drive ribbon cables.
IDE1/IDE2: Hard Disk Connectors
The motherboard has a 32-bit Enhanced PCI IDE Controller that provides PIO Mode 0~4, Bus Master, and Ultra DMA 33/66/100/133 functionality. The IDE connectors can connect a master and a slave drive, so you can connect up to two hard disk drives. The first hard drive should always be connected to IDE1.
PCI1~PCI3: Peripheral Component Interconnect Slots
This motherboard is equipped with 3 standard PCI slots. PCI stands for Peripheral Component Interconnect, and it is a bus standard for expansion cards. This PCI slot is designated as 32 bits.

PCI1 PCI2 PCI3

AGP1: Accelerated Graphics Port Slot
Your monitor will attach directly to that video card. This motherboard supports video cards for PCI slots, but it is also equipped with an Accelerated Graphics Port (AGP). An AGP card will take advantage of AGP technology for improved video efficiency and performance, especially with 3D graphics.
CNR1: Communication Network Riser Slot
The CNR specification is an open Industry Standard Architecture, and it defines a hardware scalable riser card interface, which supports modem only.
CHAPTER 3: HEADERS & JUMPERS SETUP

3.1 HOW TO SETUP JUMPERS

The illustration shows how to set up jumpers. When the jumper cap is placed on pins, the jumper is close, if not, that means the jumper is open.

Pin opened

Pin closed

Pin1-2 closed

DETAIL SETTINGS
Pin 1-2 Close: JUSBV1: +5V for USB ports at JUSB1 and JUSBLAN1. JUSBV2: +5V for USB ports at front panel (JUSB2/JUSB3). Pin 2-3 Close: JUSBV1: USB ports at JUSB1 and JUSBLAN1 are powered by +5V standby voltage. JUSBV2: USB ports at front panel (JUSB2/JUSB3) are powered by +5V standby voltage.
JUSBV1/JUSBV2: Power Source Headers for USB ports

Pin 1-2 Close (Default)

JUSBV2

Pin 2-3 Close

In order to support this function Power-On system via USB device, JUSBV1/ JUSBV2 jumper cap should be placed on Pin 2-3 individually.
JATXPWR1: ATX Power Source Connector
This connector allows user to connect 20-pin power connector on the ATX power supply.
Pin Assignment +3.3V +3.3V Ground +5V Ground +5V Ground PW_OK Standby Voltage +5V +12V +3.3V -12V Ground PS_ON Ground Ground Ground -5V +5V +5V
JATXPWR2: ATX Power Source Connector
By connecting this connector, it will provide +12V to CPU power circuit.
Assignment +12V +12V Ground Ground
JUSB2/JUSB3: Headers for USB 2.0 Ports at Front Panel
This header allows user to connect additional USB cable on the PC front panel, and also can be connected with internal USB devices, like USB card reader.
Pin Assignment +5V (fused) +5V (fused) USBUSBUSB+ USB+ Ground Ground Key NC
JPANEL1: Front Panel Header
This 24-pin connector includes Power-on, Reset, HDD LED, Power LED, Sleep button, speaker and IrDA Connection. It allows user to connect the PC cases front panel switch functions.
PWR_LED On/Off + + + 24 23

RST HLED

IR (optional)

Pin 21 23

Assignment +5V N/A N/A Speaker HDD LED (+) HDD LED (-) Ground Reset control N/A N/A +5V IRTX
Function Speaker Connector
Hard drive LED Reset button
IrDA Connector (optional)

Pin 22 24

Assignment Sleep control Ground N/A Power LED (+) Power LED (+) Power LED (-) Power button Ground N/A Key Ground IRRX
Function Sleep button N/A Power LED Power-on button
JCDIN1: CD-ROM Audio-in Connector
This connector allows user to connect the audio source from the variaty devices, like CD-ROM, DVD-ROM, PCI sound card, PCI TV turner card etc.

Assignment Left Channel Input Ground Ground Right Channel Input
JFAUDIO1: Front Panel Audio Header
This header allows user to connect the front audio output cable with the PC front panel. It will disable the output on back panel audio connectors.

Pin 5 6

Assignment Mic-in/Stereo MIC-in R Ground Stereo MIC-in L Audio power Right line-out/ Speaker-out Right Right line-out/ Speaker-out Right Reserved Key Left line-out/ Speaker-out Left Left line-out/ Speaker-out Left Right line-in (optional) Right line-in (optional) Left line-in (optional) Left line-in (optional)
JCMOS1: Clear CMOS Header
By placing the jumper on pin2-3, it allows user to restore the BIOS safe setting and the CMOS data, please carefully follow the procedures to avoid damaging the motherboard.
Pin 1-2 Close: Normal Operation (Default).
Pin 2-3 Close: Clear CMOS data.

Clear CMOS Procedures:

1. 2. 3. 4. 5. 6. Remove AC power line. Set the jumper to Pin 2-3 Close. Wait for five seconds. Set the jumper to Pin 1-2 Close. Power on the AC. Reset your desired password or clear the CMOS data.
JCI1: Chassis Open Header
This connector allows system to monitor PC case open status. If the signal has been triggered, it will record to the CMOS and show the message on next boot-up.

Pin 1 2

Assignment Case open signal Ground
JSATA1~JSATA2: Serial ATA Connectors
The motherboard has a PCI to SATA Controller with 2 channels SATA interface, it satisfies the SATA 1.0 spec and with transfer rate of 1.5GB/s.
Assignment Ground TX+ TXGround RXRX+ Ground

JSATA1

JSPDIFO1: Digital Audio-out Connector
This connector allows user to connect the PCI bracket SPDIF output header.
Assignment +5V SPDIF_OUT Ground

CHAPTER 4: USEFUL HELP

4.1 AWARD BIOS BEEP CODE
Beep Sound One long beep followed by two short beeps High-low siren sound Meaning Video card not found or video card memory bad CPU overheated System will shut down automatically One Short beep when system boot-up No error found during POST Long beeps every other second No DRAM detected or install

EXTRA INFORMATION

After you fail to update BIOS or BIOS is invaded by virus, the Boot-Block function will help to restore BIOS. If the following message is shown after boot-up the system, it means the BIOS contents are corrupted.

A. BIOS Update

In this Case, please follow the procedure below to restore the BIOS: 1. Make a bootable floppy disk. 2. Download the Flash Utility AWDFLASH.exe from the Biostar website: www.biostar.com.tw 3. Confirm motherboard model and download the respectively BIOS from Biostar website. 4. Copy AWDFLASH.exe and respectively BIOS into floppy disk. 5. Insert the bootable disk into floppy drive and press Enter. 6. System will boot-up to DOS prompt. 7. Type Awdflash xxxx.bf/sn/py/r in DOS prompt. (xxxx means BIOS name.) 8. System will update BIOS automatically and restart. 9. The BIOS has been recovered and will work properly.

B. CPU Overheated

If the system shutdown automatically after power on system for seconds, that means the CPU protection function has been activated. When the CPU is over heated, the motherboard will shutdown automatically to avoid a damage of the CPU, and the system may not power on again. In this case, please double check: 1. The CPU cooler surface is placed evenly with the CPU surface. 2. CPU fan is rotated normally. 3. CPU fan speed is fulfilling with the CPU speed. After confirmed, please follow steps below to relief the CPU protection function. 1. Remove the power cord from power supply for seconds. 2. Wait for seconds. 3. Plug in the power cord and boot up the system. Or you can: 1. Clear the CMOS data. (See Close CMOS Header: JCMOS1 section) 2. Wait for seconds. 3. Power on the system again.

P4M800 Pro-M7 4.3

TROUBLESHOOTING
Problem Solution No power to the system at all 1. Make sure power cable is Power light dont illuminate, fan securely plugged in. inside power supply does not turn 2. Replace cable. on. 3. Contact technical support. 2. Indicator light on keyboard does not turn on. System inoperative. Keyboard lights Using even pressure on both ends of are on, power indicator lights are lit, the DIMM, press down firmly until the and hard drive is spinning. module snaps into place. System does not boot from hard disk 1. Check cable running from disk to drive, can be booted from optical drive. disk controller board. Make sure both ends are securely plugged in; check the drive type in the standard CMOS setup. 2. Backing up the hard drive is extremely important. All hard disks are capable of breaking down at any time. System only boots from optical drive. 1. Back up data and applications Hard disk can be read and applications files. can be used but booting from hard disk 2. Reformat the hard drive. is impossible. Re-install applications and data using backup disks. Screen message says Invalid Review systems equipment. Make sure Configuration or CMOS Failure. correct information is in setup. Cannot boot system after installing 1. Set master/slave jumpers second hard drive. correctly. 2. Run SETUP program and select correct drive types. Call the drive manufacturers for compatibility with other drives.

CHAPTER 5: WARPSPEEDER

INTRODUCTION
[WarpSpeeder], a new powerful control utility, features three user-friendly functions including Overclock Manager, Overvoltage Manager, and Hardware Monitor. With the Overclock Manager, users can easily adjust the frequency they prefer or they can get the best CPU performance with just one click. The Overvoltage Manager, on the other hand, helps to power up CPU core voltage and Memory voltage. The cool Hardware Monitor smartly indicates the temperatures, voltage and CPU fan speed as well as the chipset information. Also, in the About panel, you can get detail descriptions about BIOS model and chipsets. In addition, the frequency status of CPU, memory, AGP and PCI along with the CPU speed are synchronically shown on our main panel. Moreover, to protect users' computer systems if the setting is not appropriate when testing and results in system fail or hang, [WarpSpeeder] technology assures the system stability by automatically rebooting the computer and then restart to a speed that is either the original system speed or a suitable one.

SYSTEM REQUIREMENT

OS Support: Windows 98 SE, Windows Me, Windows 2000, Windows XP DirectX: DirectX 8.1 or above. (The Windows XP operating system includes DirectX 8.1. If you use Windows XP, you do not need to install DirectX 8.1.)
P4M800 Pro-M7 5.3 INSTALLATION
1. Execute the setup execution file, and then the following dialog will pop up. Please click Next button and follow the default procedure to install.
2. When you see the following dialog in setup procedure, it means setup is completed. If the Launch the WarpSpeeder Tray Utility checkbox is checked, the Tray Icon utility and [WarpSpeeder] utility will be automatically and immediately launched after you click Finish button.
Usage: The following figures are just only for reference, the screen printed in this user manual will change according to your motherboard on hand. 22
P4M800 Pro-M7 5.4 [WARPSPEEDER] INCLUDES 1 TRAY ICON AND 5 PANELS
Whenever the Tray Icon utility is launched, it will display a little tray icon on the right side of Windows Taskbar.

1. Tray Icon:

This utility is responsible for conveniently invoking [WarpSpeeder] Utility. You can use the mouse by clicking the left button in order to invoke [WarpSpeeder] directly from the little tray icon or you can right-click the little tray icon to pop up a popup menu as following figure. The Launch Utility item in the popup menu has the same function as mouse left-click on tray icon and Exit item will close Tray Icon utility if selected.

2. Main Panel

If you click the tray icon, [WarpSpeeder] utility will be invoked. Please refer to the following figure; the utilitys first window you will see is Main Panel. Main Panel contains features as follows: a. b. c. Display the CPU Speed, CPU external clock, Memory clock, AGP clock, and PCI clock information. Contains About, Voltage, Overclock, and Hardware Monitor Buttons for invoking respective panels. With a user-friendly Status Animation, it can represent 3 overclock percentage stages: Man walkingoverclock percentage from 100% ~ 110 % Panther runningoverclock percentage from 110% ~ 120% Car racingoverclock percentage from 120% ~ above

3. Voltage Panel

Click the Voltage button in Main Panel, the button will be highlighted and the Voltage Panel will slide out to up as the following figure. In this panel, you can decide to increase CPU core voltage and Memory voltage or not. The default setting is No. If you want to get the best performance of overclocking, we recommend you click the option Yes.

4. Overclock Panel

Click the Overclock button in Main Panel, the button will be highlighted and the Overclock Panel will slide out to left as the following figure.
Overclock Panel contains the these features: a. 3MHz button, -1MHz button, +1MHz button, and +3MHz button: provide user the ability to do real-time overclock adjustment.
Warning: Manually overclock is potentially dangerous, especially when the overclocking percentage is over 110 %. We strongly recommend you verify every speed you overclock by click the Verify button. Or, you can just click Auto overclock button and let [WarpSpeeder] automatically gets the best result for you.
Recovery Dialog button: Pop up the following dialog. Let user select a restoring way if system need to do a fail-safe reboot.
c. Auto-overclock button: User can click this button and [WarpSpeeder] will set the best and stable performance and frequency automatically. [WarpSpeeder] utility will execute a series of testing until system fail. Then system will do fail-safe reboot by using Watchdog function. After reboot, the [WarpSpeeder] utility will restore to the hardware default setting or load the verified best and stable frequency according to the Recovery Dialogs setting. Verify button: User can click this button and [WarpSpeeder] will proceed a testing for current frequency. If the testing is ok, then the current frequency will be saved into system registry. If the testing fail, system will do a fail-safe rebooting. After reboot, the [WarpSpeeder] utility will restore to the hardware default setting or load the verified best and stable frequency according to the Recovery Dialogs setting.
Note: Because the testing programs, invoked in Auto-overclock and Verify, include DirectDraw, Direct3D and DirectShow tests, the DirectX 8.1 or newer runtime library is required. And please make sure your display cards color depth is High color (16 bit) or True color (24/32 bit) that is required for Direct3D rendering.

5. Hardware Monitor Panel
Click the Hardware Monitor button in Main Panel, the button will be highlighted and the Hardware Monitor panel will slide out to left as the following figure. In this panel, you can get the real-time status information of your system. The information will be refreshed every 1 second.

6. About Panel

Click the about button in Main Panel, the button will be highlighted and the About Panel will slide out to up as the following figure. In this panel, you can get model name and detail information in hints of all the chipset that are related to overclocking. You can also get the mainboards BIOS model and the Version number of [WarpSpeeder] utility.
Note: Because the overclock, overvoltage, and hardware monitor features are controlled by several separate chipset, [WarpSpeeder] divide these features to separate panels. If one chipset is not on board, the correlative button in Main panel will be disabled, but will not interfere other panels functions. This property can make [WarpSpeeder] utility more robust.