Functions/Settings

Irony Chrono / Diaphane Chrono

Display

Time setting

A B C D E

Minutes counter (60 minutes) Seconds counter

10 second counter

Push-button Crown Push-button Hours hand Seconds hand Minutes hand
Normal position of the crown Position for setting the time

F G H I

To set the time, pull the crown out to position C and turn clockwise or anticlockwise. After resetting has been completed, press the crown back to position A.

Timing mode

To set the date, pull the crown out to position B, and turn anticlockwise. After resetting has been completed, press the crown back to position A.
Press 1. The upper push-button to start the chronograph. 2. Once again to read the elapsed time. 3. The lower push-button to reset.

Split time

Add Functions

Restart

Press 1. The upper push-button to start the chronograph. 2. The lower push-button to read the intermediary time. 3. Once again to continue (repeat the last two actions as many times as you wish to read the intermediary time while the chrono carries on). 4. The upper push-button to stop finally. 5. The lower push-button to reset.
Press 1. The upper push-button to start. 2. Press the upper push-button to read the first time. 3. Press the upper push-button to restart the chronograph. 4. Press the upper push-button to read the additional time (repeat these two steps as many time as you wish). 5. Press the lower push-button to reset.

Readjustment

Tachometer
Measure the speed Base 100 or 1000 m. Press 1. The upper push-button when an action starts. 2. Once again to stop after a distance of 100 or 1000 m. Read the speed indicated by the 60 seconds counter on the tachometer scale (km/h = kph). 3. The lower push-button to reset. Adjusting the chronograph (ex: after battery change or a hard shock) 1. Pull the crown to position B. 2. Press the upper button to reach the position 12 h 00 with the hand of the 110 sec. counter. 3. Pull the lower button to reach the position 12 h 00 with the hand of the seconds. 4. Pull the crown to the position C. 5. Press the upper button to reach the position 12 h 00 with the hand of the minutes counters. 6. Press the crown to position A.

Skin Chrono

Functions/Settings

Display

Split time

A B C D E F

10 second counter
Seconds counter Minutes counter (60 minutes) Crown Minutes hand Hours hand Go

Timing mode

Start Stop
Press 1. P1 to start the chronograph. The second counter B operates. 2. P2 to read the intermediary time. 3. P2 again to continue (repeat the last two actions as many times as you wish to read the Intermediary time while the chrono carries on). 4. P1 to stop finally. A, B and C shows the final time measurement. 5. P2 to reset the counters.
Press 1. P1 to start the chronograph. The second counter B operates. 2. P1 once again to read the elapsed time. A shows the 110 second. B shows seconds. C shows the minutes. 3. P2 to reset the counters. The chrono functions will automatically cease if not used within two hours.

Add function

Readjustment

Restart

Adjusting the chronograph (ex: after battery change or a hard shock): Press 1. simultaneously P1 + P2 until A, B and C complete the cycle. 2. P2. A completes a whole cycle. 3. P1 to align A.
Press 1. P1 to start the chronograph. 2. P1 again to read the first time. 3. P1 to restart the chronograph. 4. P1 to read the additional time (repeat these two steps as many time as you wish). 5. P2 to reset the counters.
4. P2 again, and B completes a whole cycle. 5. P1 to align B. 6. P2 again, and C completes a whole cycle. 7. P1 to align C. 8. simultaneously P1 + P2 again, to complete the readjustment process. The watch will acknowledge this procedure with a revolution on all displays. If P1 + P2 are not pressed within 5 seconds, the watch will carry out the acknowledgement function automatically.