Parrot DriveBlue

Easy - Compact - Efficient
Parrot presents the first Bluetooth TM handsfree Kit requiring no installation. Concentrated into 85 grams ingenuity and equipped with Parrot technology, the DriveBlue is the answer to most demanding users expectations. The DriveBlue is immediately ready to use, once plugged into cigar-ligther the Bluetooth TM magic operates. You can make and reiceve calls whilst remaining concentrated on your driving.
PARROT PRESENTS THE FIRST BLUE TOOTH TM KIT WITHOUT INSTALLATION Advanced features (*) : Phone book synchronisation. Control menu on phone screen. Voice recognition on up to 200 names. Compatibility, as of Q2, 2003 :
SonyEricsson T68i, P800. Nokia 6310, 6310i, 8910, 8910i, 3650. Ericsson R520, T39, T68. Philips Fisio 820, 825 Siemens S55, S56 Motorola A835 With DBA10 adapter Ericsson R320s, T28s, T20s, T29, A2618, A2628 Updates of DriveBlue software via Internet and by Bluetooth connection.
(*) Provided with some models of phones only.
Bluetooth TM Handsfree without installation
Standard features : Echo cancellation, noise reduction. Voice recognition dialling. Multi-users, up to three phones. Volume control. Private conversation mode.
Customisable feature : Dual call. Auto connect on incomming call. Main and secondary users. Wordspotting (*).

www.parrot.fr

SAY YES TO THE MAGIC
B l u e To o t h T M i n b r i e f
Bluetooth is a short range radio technology that can transmit voice and data at speeds of up to 1/Mb/s. Launched in 1998 by the special interest Group (SIG) comprising, among others, Ericsson Intel, IBMc, Toshiba and Nokia, Bluetooth technology is currently promoted by nearly 2000 companies and relies on frequencies available worldwide.

HighPerTec

High P erformanc e Tec hnology
Deutschland/Germany: HANTZ + PARTNER GMBH Tel: 0761/592100 Fax: 0761/585228 International: +49-761/. sterreich/Austria: HANTZ + PARTNER GMBH Tel: 01/58554-30 Fax: 01/58554-60 International: +43-1/. Schweiz/Switzerland: HANTZ + PARTNER EDV AG Tel: 061/27311-31 Fax: 061/27311-39 International: +41-61/. Internet: http://www.hantz.com www.bluetoothupgrades.de E-Mail: info@hantz.com
S AY Y E S T O T H E M A G I C

ENGLISH

Thank you for purchasing Parrot DriveBlue, the hands-free kit with voice recognition equipped with BluetoothTM radio technology. Parrot Driveblue offers you the following functions: Wireless radio connection with your telephone via Bluetooth; Full duplex hands-free conversation with echo cancellation and digital signal processing (DSP) Background noise reduction; Voice recognition for up to 200 voice tags *;
* Only with specific phones
The DriveBlue functions available for most phones are: - answering a call - hanging up, - making a call - redialing - dual calls - setting the volume - private mode Additional functions such as phonebook synchronization and multiple phone management depend on the specific phone used.
OVERVIEW AND INSTALLATION
The DriveBlue works: - in half-duplex when the external microphone is not used - in full-duplex when the external microphone is used. Both modes of communication are included in the system. With the internal microphone, the separation between the microphone and the speaker is small and allows for half-duplex only. The driver has the priority over the party at the other end. With the external microphone, the jack has to be fully plugged in to transfer from half-duplex to full-duplex. The separation between the external microphone and the DriveBlue unit should be sufficient to remove echos (approximately 12 inches depending on orientation, separate more if the echo remains). The communication channels for the driver and the other party are available at the same time. Removing the jack of the microphone restores the half-duplex Use your normal voice, as you would with someone sitting next to you. Do not raise your voice, because the performance of the DriveBlue will be diminished. Microphone: The microphone should be directed towards the driver and should preferably be installed in between the visor and rear-view mirror. Other central positions may be used. Positions on the door side are to be avoided. Also check that the ventilation (or air conditioning system) does not blow directly into the microphone. Extender: The Driveblue operates in all cars. However, in some rare occasions ( some models of Ford Bronco, for exampleo), because the depth at which the cigarette-lighter is placed, it is convenient to add an extender, so that the driver has the DriveBlue in full view. You may get an extender by asking your store or by ordering it from any distributor listed on our Website. Finding the software version of the DriveBlue: If you want to find which is the software version of the unit, check which devices have been discovered when you do a pairing. On the display of your phone, you willl see the list of devices found. For example, DriveBlue v3.10 indiactes that the software version installed in your DriveBlue unit is v3.10. 1
IMPORTANT: DriveBlue operates only when the cigarette-lighter is on. The blue light must be on.
IMPORTANT: Before using the DriveBlue, you must first pair it with your phone. See instructions below.
PAIRING WITH NOKIA 6310, 6310I, 8910, 8910I, 6650 AND 7600
You need to pair devices when powering up the DriveBlue for the first time or after resetting your hands-free. Subsequently, all connections between your phone and the car kit are automatically established when both devices are within a few meters range of each other. A 'beep' is heard when the connection is established. Procedure : Check that the blue light on top of the DriveBlue is on. You should hear the Please pair device instruction for the first time. If not, reset your DriveBlue by pressing the green and the red buttons at the same time, and wait for Please pair device instruction. Now carry out the following sequence on your phone. Access the Menu and scroll to "Bluetooth", press "Select". Find "On" to activate Bluetooth. To "Search for audio accessories", press Select. The display reads "Searching for devices". Please wait. The display reads "Parrot DriveBlue v", press "Select" to make the connection. The display reads, "Enter password", enter 1234 then " Select". From now on, when you press the keys on your phone, you should hear the sound coming through your vehicle loudspeakers. After getting into your car, your telephone should ask you whether you wish to establish the Bluetooth connection with the DriveBlue. If you want to, you can disable this function. To do that, go into the Menu, and select Bluetooth using the up and down buttons. Then, scroll until view paired devices, press Select. <Parrot DriveBlue> appears, click on Options. Scroll until Request conn. Authorisation, enter Select.

For more information, consult your Nokia phone user's guide.

LEARNING NAMES

To assign a voice tag to a name, access your directory by scrolling with the on "Details", then "Options". Find "Add voice tag" and click on "Select". The following message is displayed: "Press Start then speak after the tone". Then press "Start" and say the name. or keys. Find the desired name and click
To remove the voice tag for any name, access your directory by scrolling through the then "Options". Find "Voice tag" and click "Select". By clicking "Change", you can re-record over the voice tag. By clicking "Erase", you will delete the previous voice tag recording.
keys and click on "Details",

ENGLISH COMMUNICATING

Making a call using the voice recognition*: Press the green button and wait for the tone, then say the name of the person you want to call. Example: press green button, [beep], Nicholas. * 10 In-phone Voice Tags only. Limited by Nokia software. Making a call manually:
Use the phone keypad to dial the number. Your call will be connected automatically, in hands-free mode. The green and red buttons of your DriveBlue are your principal tool for making and receiving manual calls. To redial last number called: Press and hold green button. Answering a call: Press green button to answer. Press red button if you do not want to receive a call, the caller will then be forwarded to your voice mail. Managing two incoming calls: A warning tone will alert you if someone is trying to get through while you are engaged on another phone call. Press green button once to communicate with a new caller. Press green button once to return to your first caller. To end the communication, press red button once. Adjusting the volume: Use the keys on the handset to adjust the volume of the conversation. Private mode: Press the green button briefly to switch the conversation to hands-free or handset mode. You are also able to activate the Private mode on the phone. Refer to the manual for your handset.

NOKIA/SIEMENS

PAIRING WITH NOKIA 3650, 3600, N-GAGE, 6600 AND SIEMENS SX1
You need to pair devices when powering up the DriveBlue for the first time or after resetting your hands-free. Subsequently, all connections between your phone and the car kit are automatically established when both devices are within a few meters range of each other. A 'beep' is heard when the connection is established. Procedure : Check that the blue light on top of the DriveBlue is on. You should hear the Please pair device instruction for the first time. If not, reset your DriveBlue by pressing the green and the red buttons at the same time, and wait for Please pair device instruction. From your phone, display the main menu, select : the CONNECTIVITY icon, then the BLUETOOTH icon for Nokia 3650, 3600, 6600 and Siemens SX1 the TOOLS icon, then the BLUETOOTH icon for Nokia N-GAGE Check that BLUETOOTH is ON, select the PAIRED DEVICES tab by pressing the right arrow, press OPTIONS. Select NEW PAIRED DEVICE (searching). Press STOP, Select Parrot DriveBlue v (waiting). Enter 1234 as PASSCODE, press OK. After the 'beep', accept the connection request by pressing YES. After getting into your car, your telephone may ask you whether you wish to establish the Bluetooth connection with the DriveBlue. If you want to, you can disable this function : In the BLUETOOTH menu, go in the PAIRED DEVICES tab by pressing the right arrow Select Parrot DriveBlue v and then OPTIONS Then, select SET AS AUTHORISED

USING PHONE-SPECIFIC FEATURES

Redialing:

Press and hold the PICK UP (green) button on the keypad unit for 2 seconds to redial the last number called. Upon hearing a 'beep' during a call, press the PICK UP (green) button on the keypad. The active call is placed on hold while the waiting call is accepted. Press the PICK UP button again to switch between the two calls. Press the HANG UP button on to reject the waiting call.

Dual call:

Private mode: During the call, press the PICK UP button on the DriveBlue to toggle between hands-free and private mode. Private mode routes the call to the phone. Auto Answer: From your phone, display the main menu, select the TOOLS icon. Select SETTINGS, and then select : ACCCESSORY icon for Nokia 3650, 3600, 6600 and Siemens SX1 ENHANCEMENT icon for Nokia N-GAGE Select HANDSFREE, AUTOMATIC ANSWER, select OPTIONS, select CHANGE, select ON, press OK. NOTE: Make sure the Bluetooth option is turned ON.

TRAINING NAMES

Your phone lets you assign voice tags to any phonebook entry. With the DriveBlue, you can use those tags to call your contacts, press the PICK UP button and say the name after hearing the 'beep'. Training Names From your phone, display the main menu, select the CONTACTS icon. From the phonebook list, select the name you wish to train, press OPTIONS. Select OPEN, press SELECT. Select the phone number you wish to train, and then select OPTIONS, select ADD VOICE TAG, press SELECT. Press START and say the name displayed. Refer to your phone manual for details on how to edit the voice tags. 4
ENGLISH PAIRING WITH PHILIPS FISIO 820 AND 825

PHILIPS

You need to pair devices when powering up the DriveBlue for the first time or after resetting your hands-free. Subsequently, all connections between your phone and the car kit are automatically established when both devices are within a few meters range of each other. A 'beep' is heard when the connection is established. Procedure : Check that the blue light on top of the DriveBlue is on. You should hear the Please pair device instruction for the first time. If not, reset your DriveBlue by pressing the green and the red buttons at the same time, and wait for Please pair device instruction. Click on the Menu key on your telephone. For the Fisio 820, Press the key until Settings, confirm. Press the key until Accessories, confirm. For the Fisio 825, press the key until Bluetooth, confirm. Bluetooth Headset is displayed; confirm by pressing 5. Detect is displayed, confirm by pressing 5, Parrot DriveBlue v is displayed, press 5. Detection is displayed, wait. Pairing appears at the top of the screen of your telephone. Enter the pairing password 1234 then press OK. The pairing process shall be confirmed by a beep sound. For more information, consult your Philips phone user's guide.

COMMUNICATING

Attention : If you prefer to use the voice recognition of your phone (limited to 15 voice tags), dont follow this procedure and record your voice tags directly from your phone menus. Hold the red button: your directory is displayed on the handset screen. Select a name and click on Select. Follow the vocal prompts.
Making a call using voice recognition: Press the green key briefly, [Beep], and then say a name Example: Press the green key [DriveBlue beeps, telephone beeps], Nicolas. Making a call manually: Dial the number directly on the handset; Press the green button to switch the conversation to hands-free mode. To redial last number called: To redial the last number called, hold the green button a few seconds Answering a call: Press the green button if you want to pick-up the incoming call. Press the red button if you do not want to receive the incoming call. It will be forwarded to your voice mail. Managing two incoming calls: A warning tone will alert you if someone is trying to call you while you are on another call. Press the green button once to pick up the new call. Press the green button once again to return to the first call. To end the call, press the red button once Adjusting the volume: Use the keys on the handset to adjust the volume of the conversation. Private mode: Press the green button briefly to switch the conversation to hands-free or handset mode. For more information, consult your Siemens phone user's guide. 6
ERICSSON & SONY ERICSSON
PAIRING WITH ERICSSON R520M ,T39/T39M,T68/T68M AND SONY ERICSSON T68I
You need to pair devices when powering up the DriveBlue for the first time or after resetting your hands-free. Subsequently, all connections between your phone and the car kit are automatically established when both devices are within a few meters range of each other. A 'beep' is heard when the connection is established. Procedure : Check that the blue light on top of the DriveBlue is on. You should hear the Please pair device instruction for the first time. If not, reset your DriveBlue by pressing the green and the red buttons at the same time, and wait for Please pair device instruction. IMPORTANT: for Ericsson T39/T39m, R520m, T68/T68m and SonyEricsson T68i, the infrared (IrDA) sensor has to be disabled for the DriveBlue to operate. Comply with the following recommendations: Go into the Menu, go to "Extras" or Connect; until " Infrared port", press "Yes", then until "Disabled" and confirm by pressing "Yes". After making sure that the blue light on top of the DriveBlue is on, carry out the following sequence for Ericsson R520m, T68/T68m and T39/T39m telephones. For the T68/T68m and T68i, go to "Connect", then "Bluetooth", then follow the instructions below. For the R520 and the T39/T39m, press until "Extras", then until "Bluetooth" and press "Yes". Press until "Paired devices", press Yes. Press "Add device", and "Yes ". Select "Phone initiates", press "Yes" then press and select "Headsets" or Handsfree, press "Yes", then "Prepare headset" is displayed. "Searching" is displayed. When "Parrot DriveBlue v." is displayed, click on "Yes". "Add to Parrot devices" - press "Yes". "Connection key" or Enter Password is displayed, enter 1234, then press "Yes". The connection phase is now complete and "Pairing succeeded" is displayed on your screen. Then press Yes to validate the name of your new paired device. For phones with Handsfree profile, the initial synchronization is manual (see Phone configuration page 11). Please, go to the phone Menu Connect Accessories. Press Yes and Parrot Menu is displayed. Press Yes and your phonebook will synchronize with the DriveBlue.

ENGLISH PAIRING WITH SONY ERICSSON T610, T616, T618, Z600 AND Z608
You need to pair devices when powering up the DriveBlue for the first time or after resetting your hands-free. Subsequently, all connections between your phone and the car kit are automatically established when both devices are within a few meters range of each other. A 'beep' is heard when the connection is established. Procedure : Check that the blue light on top of the DriveBlue is on. You should hear the Please pair device instruction for the first time. If not, reset your DriveBlue by pressing the green and the red buttons at the same time, and wait for Please pair device instruction. IMPORTANT: Check that the blue light on top of the DriveBlue is on. With these phones, it is necessary to deactivate the infrared link (IrDA) for the DriveBlue to work. Proceed according to the following steps Connections, Activation IR, select Deactivate and validate by clicking on Selection. Your phone is on. Turn on the ignition key. Proceed with the following sequence to do the pairing

Select Connections, then Bluetooth. The pairing is done through HandsFree or My Peripherals Select Handsfree, validate by clicking on Selection Add a handsfree device? is indicated on the display, validate with Yes or alternatively, Select My Peripherals, validate by clicking on Selection New Peripheral, click on Add Check if the Handsfree is in the correct mode and if you have the passkey,OK Searching for handsfree devices is displayed, just wait. The phone looks for all devices equipped with a handsfree profile. Then, Parrot DriveBlue v is displayed, validate by clicking on selection Enter 1234 as passkey, click OK. The pairing phase comes to an end and Parrot DriveBlue vadded to my peripherals is displayed.
Using Phone-specific Features To synchronize your phonebook to your DriveBlue, follow the steps hereafter: Connections, Accessories, Parrot Menu. For detailed instructions, consult the users guide of the phone.

ENGLISH LEARNING NAMES

In order to assign voice tags to the names in your phonebook, go into your phone menu and follow the instructions below in order to go to the Parrot Menu. Enter the menu and select Phone book. You will see the list of your phone book entries. To create a voice tag, highlight the desired name and press Yes. Youll hear vocal prompt saying Click on Yes and say the name displayed. Repeat the procedure as prompted. The voice tagged numbers will be preceded by an asterisk (*).

WARNING!

Correct recording of the voice tags is very important. The reliability of the voice dialing system depends of the standard of the recording. To obtain optimum operation, please, comply with these recommendations: Speak out clearly and naturally. Make the recording in quiet place. Turn off your engine, radio and ventilation. Close the doors and windows. Example: Go to Main Menu, Phonebook, List and click on Yes and choose the name youd like to add as a voice tag. You will hear a prompt: Click on Yes, and say the name displayed. Press Yes and say: Nicolas. The system repeats: Click on Yes, and repeat Nicolas. You press Yes again and repeat: Nicolas.

IMPORTANT: If the DriveBlue says, Speak louder, you need to clearly repeat the name after a beep. For the best results pronunciation should be as close to the pre-recorded voice tag as possible.
Making a call using voice recognition: Press the DriveBlue green key, you shall hear a beep from the car kit and from the telephone, you should then say your contacts name. Example: Press the green key [ DriveBlue beeps, telephone beeps], Nicholas; To hang up, press the red key. To make a call using Wordspotting option (must be activated, see Parrot Menu, Voice Recognition): Say: "Telephone", wait for the beep, and pronounce the name of the person you wish to call. Example: "Telephone, {beep}, Nicolas". If there are several numbers stored in memory for the same name (visiting card or V-card), the call, using voice recognition, will be placed in the following manner: Say: "Telephone", wait for the beep, and pronounce the name of the person you wish to call. DrivBlue repeats the name, and then emits a beep; you must then indicate the number to be dialled, "Home", "Work" or "Cellular". You must wait for a beep after every word. Example: "Telephone, {beep}, Nicolas, {beep}, cellular". To end the call, say Hang up Making a call manually: Dial the number on the telephone keypad. Your call will be automatically transferred to the DriveBlue. To redial last number called: Press and hold the green button

Answering a call :

Ericsson and SonyEricsson phones use two ways to answer the incoming call: 1 Keypad To call or to answer a call press the green key To hang up press the red key 2 Keywords (Wordspotting function activated) To call or answer a call, say Telephone To hang up say Hang up Other words convenient to you maybe used in place of Telephone and Hang up. Using the Wordspotting option : Say "Telephone" to pick up the call. If you do not want to accept the call, say "Hang Up". Manually : Press the green key to pick up call. If you do not want to accept the call, press the red key. If you are in an "Automatic answer" mode, the call will come through automatically after 2 rings. Managing two incoming calls : A warning tone will alert you if someone is trying to call you while you are on another call. Press the green button once to pick up the new call. Press the green button once again to return to the first call. To end the call, press the red button once. Adjusting the volume : Use the keys on the handset to adjust the volume of the conversation. Private mode : You can activate Private mode and transfer the conversation from the DriveBlue to the phone. This can be done during a call : Go to Menu to Calls, Yes and press until "Transfer sound": press "Yes". Retrieve call in phone?" is displayed. Press "Yes". The call comes back on your mobile. You can also press the green button to transfer the conversation to your handset. Press the green button to return the conversation to hands-free mode. (This function is only available with handsets equipped with the handsfree profile - see Phone configuration page 11). IMPORTANT : 1 If in making a call manually with T68i, the communication takes place through the handset, the telephone must be configured so that all calls dialed manually are automatically in hands-free mode. Select Connect in the phones menu. Until Bluetooth, click on Yes. Until Options, dick on Yes. Until Ear piece sound confirm by Yes, select Ear piece and confirm by Yes. 2 - If, in addition to the DriveBlue, there is another headset paired with your T68i (and your phone is configured in Headset profile - see Phone configuration page 11)., you must configure your telephone so that the DriveBlue can receive the incoming calls. In order to do this, go to Connect in the menu, Until Bluetooth, click Yes. Until Paired Devices, confirm by Yes. Select Parrot DriveBlue v. Until Set as first, confirm by Yes.

ENGLISH PHONE CONFIGURATION
Learning about your phone's firmware The firmware determines the profile supported by your phone. Follow the sequence to learn what firmware version you have: From the phone's splash screen, using the JOYSTICK, press once to the right. Press STAR, press the JOYSTICK twice to the left, press STAR. Press the JOYSTICK once to the left, press STAR. Select the SERVICE INFO option from the hidden SERVICE menu. Press YES. Select the SOFTWARE INFO option, press YES. The firmware version is the first information displayed. Headset and Handsfree Bluetooth profiles The advantages of the use of the Headset profile are : Bluetooth link connected only during the calls (low power consumption for the battery) Availability of the "MultiTel" option (see details on "MultiTel" option below) The advantages of the use of the HandsFree profile are : Use of the vocal recognition of the phone (no voice tags in the DriveBlue) Three-way calling and Private mode transfers by using the green button Use of several DriveBlues/BT audio devices with the same handset (no need to select the "Set as First" before using the DriveBlue) The T68i phone possess the handsfree profile in addition to the headset profile with firmware equal to R5C or higher. All the firmwares of the following phones possess the handsfree and headset profiles : T610, T616, T618, Z600 and Z608. The handsfree profile will be used as a default with the DriveBlue. A new feature appeared on the latest versions of Sony Ericsson phones, allowing the support of either the handsfree or the headset profile : the Car Handsfree feature. Car Handsfree A new function called Car Handsfree is available for the following phones : T68i phones with the software version R8A015 or later T610/T616/T618 phones with the software version R1L013 or later Z600 phones with the software version R2D001 or later Z608 phones with the software version R2E004 or later Car Handsfree enables the phone to be compatible to the Headset profile or to the HandsFree profile (menu Connections, then Bluetooth, then Options). In order to choose between Headset and HandsFree, select the corresponding profile in the Car Handsfree menu. The mode Powersave activates the Headset profile. The mode Advanced activates the HandsFree profile.

ENGLISH MENU

The Main Menu consists of the following 4 sections: "Phone Book", "Parameters", "Keywords" and " Reset memory". You can access the menu items by selecting the desired menu item using the key and confirm by pressing "Yes". In the phone Menu go to Extras for T39/T39m/R520m, or Connect for T68/T68m/T68i/T610/T616/T618/Z600/Z608. Press Until Accessories and press on Yes. "Parrot Menu" is displayed, click "Yes"; menu headings are displayed. Phone book:

Search: allows you to look for a name by its first letter(s). To do this, type a letter and confirm by pressing "Yes". Parameters:
List: Displays the list of names in your phone book. Names with associated active voice tags are preceded by an asterisk (*). To learn or relearn a name, highlight the desired name and press "Yes" to confirm.
Volume : This function also adjusts the volume of the DriveBlue. Click Yes and adjust using confirm.
. Press "Yes" to
Auto answer : This function enables or disables automatic answering of incoming calls. Click Yes, and then select "Enable" or "Disable". User : When several telephones are connected to the DriveBlue, this function identifies the telephone with priority. The phone with the highest priority is the first phone to which the kit tries to connect to. o Click Yes, "Main user?" is displayed, confirm. Caller ID : This function lets you know the identity of the caller. With this function enabled, when you receive a call, the name of the person calling you is pronounced if it is already stored in your phone book and corresponding voice tag is assigned. Click Yes and select "Enable" or "Disable".
Multi-tel : This function is available for Ericsson and Sony Ericsson phones equipped only with the "Headset" profile. The affected phones are Ericsson R520, T39, T68m and the first Sony Ericsson T68i phones (software version lower than R2E). This option allows the simultaneous use of these different phones during a single session of use. The first phone getting connected to the DriveBlue is the main phone for the use session of the car-kit (until extinction). If the option "Multi-Tel" is activated for this phone, the DriveBlue will accept incoming calls from the other phones if they were previously paired with the DriveBlue. ATTENTION : The "Multi-Tel" function is now compatible with the T68i, T610, T616, T618, Z600 and Z608 (with specific software versions - see Phone configuration page 11). This function is available when the "Powersave" mode is activated in the phone, i.e. Headset profile mode (see Phone configuration page 11). Once this mode activated, the DriveBlue has to identify every phone in this new mode. It should be necessary to connect separately each phone with the DriveBlue and restarting it between each identification. Voice recognition:

Tel N: Keywords for calling V-Cards (Home, Work and Cellular) can be accessed by clicking "Yes", Tel. N. The voice recognition learning sequence is exactly the same as the one for the names. Keywords : Key words are Phone and Hang Up. You need to record your own keywords for use with Wordspotting option. Wordspotting : If activated, enables use of keywords to make a call and to hang up. - Activated: use keywords or buttons - Deactivated: use buttons only Pers. Dic : The keywords are pre-recorded in the car kit for French language only (the language is determined by the language used by the menus of the phone). You need to activate this option if you want to use your own recorded keywords.
Erasing the Memory: Click "Yes", and "Clear memory?" is displayed. Confirm by pressing "Yes" and "Memory erasing in progress. Please wait!" - is announced. To cancel, press "No". It is possible to erase the memory and reset the system without using the Parrot menu. To do this, hold the red and the green buttons together. For more information, refer to the instructions of your Ericsson or SonyEricsson users guide.

ENGLISH TROUBLESHOOTING

PROBLEMS Your telephone does not detect the hands-free kit Your telephone is not detected. Your telephone does not detect the hands-free kit Your telephone is detected too slowly when switched on. The person you are calling complains of an echo during communication. *Refer to the manual of your phone, if necessary. SOLUTIONS Switch off your telephone, and then switch it back on again. Check that the Bluetooth connection of your telephone is enabled*. Repeat the connection phase. Switch off your telephone, then switch it on again. Check that the Bluetooth connection of your telephone is enabled*. Make yourself the main user. See the section "Menu Mode ", Parameters, User. Reduce the communication volume.
PAIRING WITH SONY ERICSSON P800 AND P900
You need to pair devices when powering up the DriveBlue for the first time or after resetting your hands-free. Subsequently, all connections between your phone and the car kit are automatically established when both devices are within a few meters range of each other. A 'beep' is heard when the connection is established. Procedure : Check that the blue light on top of the DriveBlue is on. You should hear the Please pair device instruction for the first time. If not, reset your DriveBlue by pressing the green and red button at the same time, and wait for Please pair device instruction.
From your phone, open the lid, select the BLUETOOTH icon in the task bar. Click SETTINGS, click ADD, (searching). Select the DriveBlue icon (bonding in progress). Enter 1234 as PASSKEY, click DONE. Parrot DriveBlue v is displayed in the BLUETOOTH DEVICES list. Click DONE

Known issues with this phone: When finished pairing, wait for the 'beep' prior to initiating a call.
Your phone provides phone management and settings from its accessories menu. Also refer to the Standard Features section. Auto Answer:
From your phone, open the lid, select the PHONE shortcut. Click the EDIT option, click PREFERENCES. Click HANDSFREE, select AFTER 5 SECONDS from ANSWERING MODE list. Escape by clicking DONE several times.
Training names : Your phone lets you assign voice tags to any phonebook entry. With the DriveBlue, you can use those tags to call your contacts, press the PICK UP button and say the name after hearing the 'beep'. From your phone, open the lid, select the PHONEBOOK shortcut. Select a name from the list, click the EDIT option, click EDIT CONTACT. Click the VOICE DIALING shortcut, click RECORD, and speak after the tone. Escape by clicking DONE several times Training names: Record while holding the phone to your ear. Answer/Busy voice commands : Your phone lets you pick up or reject incoming calls using vocal commands. You must record the two vocal commands corresponding respectively to Answer and Busy. You must first activate the answer/busy voice commands with the following steps:
In the VOICE CONTROL item, activate the option VOICE ANSWER. Answer/Busy voice commands : Please note that, when this option is activated, you will not hear the rings from incoming calls from the kit, but only from the telephone itself. Rings from the kit are deactivated to let you use the voice commands option. Caller ID During an incoming call, your phone can identify and say the name of the caller if the phone number of the incoming call has been first recorded in the phonebook and associated with a voice tag. You must first activate the caller ID option with the following steps: From your phone, open the lid, select the TELEPHONE icon in the toolbar. In the EDIT menu, select PREFERENCES. In the VOICE CONTROL item, activate the option PLAY CALLER NAME Caller ID : Please note that, when this option is activated, you will not hear the rings from incoming calls from the kit, but only from the telephone itself. Rings from the kit are deactivated to let you hear the voice tag. 14
From your phone, open the lid, select the TELEPHONE icon in the toolbar. In the EDIT menu, select PREFERENCES.
ENGLISH PAIRING WITH PANASONIC X70

PANASONIC

You need to pair devices when powering up the DriveBlue for the first time or after resetting your hands-free. Subsequently, all connections between your phone and the car kit are automatically established when both devices are within a few meters range of each other. A 'beep' is heard when the connection is established. Procedure : Check that the blue light on top of the DriveBlue is on. You should hear the Please pair device instruction for the first time. If not, reset your DriveBlue by pressing the green and the red buttons at the same time, and wait for Please pair device instruction. Access the Menu and select Organizer", press "Select". Go to Connect and press Select. Enter Bluetooth menu. Then enter On/Off menu. Select On if it is not selected yet. Get back to the Bluetooth menu by pressing. Select Discover & Pair When the search is finished, select Parrot DriveBlue v. Press Pair. The display reads, "Bluetooth passkey", enter 1234 then " OK".

Before assigning voice tags to names, you must activate the Voice Dialing on your phone. Enter the menu and select Contacts List. Enter Settings ands select Voice Dial. Select On if it is not selected yet. To assign a voice tag to a name, enter the menu and select Contacts List. Enter Voice Dial and press Menu Select Add Find the desired name and click on "Menu", then "Recall". The following message is displayed: Please Record Your Voice !". Press Ok. The phone displays Voice Dial Recording. Say the name. After you said the name, Please Record Your Voice Again ! is displayed. Press Ok and say the name again. If the recording succeeds, the phone displays Voice Dial Set. If not, the phone will ask you to say the name again. To remove the voice tag for any name, access the menu and select Contacts List Enter the Voice Dial menu and select the name. Press Menu By clicking "Play", you can listen to the voice tag. By clicking "Delete", you will delete the voice tag.
Making a call using the voice recognition: Before using the voice recognition, make sure it is activated in your phone and voice tags are recorded. (see Learning names for more information)
Press the green button and wait for the tone, then say the name of the person you want to call. Example: press green button, [beep], Nicholas. Making a call manually: Use the phone keypad to dial the number. When the call is started, press the green button on the DriveBlue keypad to switch the call in hands-free mode. To redial last number called: Press and hold green button. Answering a call: Press green button to answer. Press red button if you do not want to receive a call, the caller will then be forwarded to your voice mail. Managing two incoming calls: A warning tone will alert you if someone is trying to get through while you are engaged on another phone call. Press green button once to communicate with a new caller. Press green button once to return to your first caller. To end the communication, press red button once. Adjusting the volume: You may also use the keys on the handset to adjust the volume of the conversation. Private mode: In communication, press the green button briefly to switch the conversation to hands-free or handset mode.

RESETTING

RESETTING THE DRIVEBLUE IS DONE BY PRESSING GREEN AND RED BUTTONS AT THE SAME TIME, AND WAITING FOR THE DRIVEBLUE TO SAY PLEASE PAIR DEVICE AFTER A FEW MINUTES. THAT APPLIES TO ALL PHONES. CAUTION: Resetting the system will entail a new pairing phase and erase all memory.