User Guide

Stylish Bluetooth Headset with Multipoint Technology

TABLE OF CONTENTS

Package Contents & Features Charging Pairing Powering Adjusting Fit Using Your Headset Multipoint Indicator Lights Optional Accessories Troubleshooting Product Specifications Technical Assistance Warranty Regulatory Notices 14 15

WELCOME

Thank you for purchasing a Plantronics headset. Let us provide you with the best possible service and technical support. After reviewing this user guide, if you need additional assistance or have any product questions, please contact: Plantronics Technical Assistance Center at 866-363-BLUE (2583) www.plantronics.com/support Please refer to the separate Safety Instructions booklet for important product safety information prior to installation or use of product.
REGISTER YOUR PRODUCT ONLINE
Visit www.plantronics.com/productregistration to register your product online so we can provide you with the best possible service and technical support.
PACKAGE CONTENTS&FEATURES
PLANTRONICS DISCOVERY 650E
Indicator light Call control button (on/off) Volume/mute button Microphone Ear loop Soft gel ear tips

small medium large

Headset charging pocket
PLANTRONICS DISCOVERY 650E ACCESSORIES
AAA battery AC charger AAA battery charger

CHARGING

PLANTRONICS Discovery 650E
Before using, you must first charge your headset. 1 hour = minimum charge 3 hours = full charge Option A: Using the included AC charger The indicator light glows red continuously while charging and turns off when fully charged. 1. Plug the AC charger into the base of the charging pocket and connect it to your power source. 2. Insert the headset into the charging pocket. Option B: Using a AAA battery One AAA battery recharges the headset to full capacity. 1. Twist the bottom of the AAA battery charger counterclockwise and release the battery holder. 2. Insert the battery into the AAA battery holder. 3. Slide the battery holder back into the battery charger and turn clockwise. 4. Snap battery charger onto charging pocket. Ensure that the indentation on the battery charger connector aligns with the shirt clip on the charging pocket. 5. Insert the headset into the charging pocket.

CAUTION

Only replace with a non-rechargeable AAA battery.

DISCONNECTING COMPONENTS

To separate components, grasp both the battery charger and the charging pocket with the shirt clip facing you. Bend the components back and they will snap apart. NOTE Do not twist the components apart.

PAIRING

This headset now comes with QuickPair technology so pairing with your Bluetooth phone is even easier. Follow the instructions below to pair your phone with your headset for the first time.
QUICKPAIR FEATURE INSTRUCTIONS
SETTINGS Time and Date Phone Settings Sound Settings Network Services Security Reset Settings

BLUETOOTH

Bluetooth

Discover/ Search

6XXPlantronics

PASSKEY

Step One: Prepare Phone Turn on Bluetooth For most phones, go to Settings/Tools menu and select Bluetooth or Connectivity and select On. (Or see the user guide for your phone.)
Step Two: Prepare Headset Pairing Mode Begin with headset turned off. Turn headset on (hold call control button for at least four seconds) and it will automatically go into pairing mode, flashing red and blue.

Step Three: Pairing Headset Passkey Add Headset to Phone For most phones, go to Settings/Tools > Bluetooth > Search or Add a Device, then Select 6XXPlantronics. For passkey enter 0000. Headset will flash blue when paired successfully. It is now powered on and ready to use.
NOTE: Normally you only need to pair the headset and handset once. If the headset has been previously paired with another device, follow pairing instructions on the next page.
If headset has been previously paired with another device, please follow these instructions for pairing a second time. Be sure the headset is fully charged. For set up and pairing instructions with other Bluetooth devices, please consult your Bluetooth device user guide or visit www.plantronics.com/easytopairan online, interactive pairing guide for phones and headsets. Begin with headset turned off. 1. Press and hold down the call control button for 10 seconds until the headset status indicator begins to flash red then blue. The headset is now in pairing mode for the next 120 seconds. 2. While the headset is flashing, use the phone menu to search for Bluetooth devices and select 6XXPlantronics. 3. When prompted for a passkey, enter 0000. Headset will flash blue when paired successfully.
To Disable Online and Standby Indicator Lights
When purchased the headset will have the online and standby indicator lights enabled. To disable these indicators, press the volume up button while turning the headset ON. To re-enable both indicator lights, turn the headset off; then press the volume up button again while turning the headset ON. NOTE: This process only disables online and standby indicator lights when headset is connected to mobile phone. All other indicator lights, such as low battery, will continue to function.

POWERING

1. Turn on the headset by pressing and holding the call control button until the indicator light glows blue. If you are wearing the headset, you will hear a beep when the power turns on. The indicator light will flash blue every 5 seconds when the power is on.

2. Turn off the headset by pressing the call control button for 6-8 seconds until the indicator light glows red or until you hear the beep. The indicator light remains unlit when the power is off.
CHARGE LEVELINDICATION When the headset is turned on, the indicator light will briefly show the headset charge level. 3 red flashes = greater than 2/3 battery charge 2 red flashes = 1/3 to 2/3 battery charge 1 red flash = less than 1/3 battery charge

ADJUSTING FIT

Right ear

Left ear

The Plantronics Discovery 650E headset comes with three soft gel ear tips and an optional ear loop. 1. The medium-sized ear tip is preinstalled and aligned for wearing on the right ear (R). 2. For left ear wearing, twist the ear tip counterclockwise. 3. Place the headset into your ear and check to see that it fits comfortably. If the headset is either too tight or too loose, remove the mediumsized ear tip from the headset by turning the ear tip to the centre or neutral position.
4. In the neutral position, the ear tip can easily be removed by pulling the ear tip directly away from the headset. Next, select the ear tip size that fits most comfortably in your ear. Hold the ear tip with the elongated edge pointing down toward the neutral position and then push the ear tip onto the headset. NOTE Choose an ear tip that is large enough such that it will not enter the ear canal. Do not insert the ear tip into the ear canal as it may become lodged in the ear canal. The ear tip should rest against the entrance to the ear canal.
USING THE OPTIONAL EAR LOOP
The ear loop may be attached to the headset to improve stability. 1. Remove the ear tip from the headset by turning the ear tip to the center or neutral position and pulling the ear tip away from the headset. 2. Attach the ear loop between the ear tip and the headset. 3. Replace the ear tip.

USING YOUR HEADSET

ANSWERING/ ENDING/MAKING CALLS
To answer or end a call, briefly press the call control button. To make a call, enter number on your phone, press send, and the call is automatically transferred to the headset; no need to press the call control button. NOTE When answering a call, wait until you hear a ring from the headset itself (not the ring from your phone), before pressing the call control button.

ADJUSTING VOLUME

To increase listening volume, press the upper end (+) of the volume/mute button. To decrease listening volume, press the lower end (-). WARNING: Do not use headphones/ headsets at high volumes for an extended period of time. Doing so can cause hearing loss. Always listen at moderate levels. See www.plantronics. com for more information on headsets and hearing.

AUTO ANSWER

Removing the headset from the pocket will automatically answer the call. Returning the headset to the charging pocket will end the call.

MUTEACALL

To turn the mute on while on a call, press both sides of the volume/mute button simultaneously until you hear a beep. To turn the mute off, press both buttons again.

ADDITIONAL FEATURES

Redialing last number To activate last number redial, double press the call control button. You will hear a high tone after each press. Using voice dialing With the headset on, press and hold the call control button for 2 seconds to activate voice dialing. NOTE To use voice activated dialing, the voice dialing feature must be enabled on your phone. See your Bluetooth phone manual for instructions. Rejecting a call When receiving an incoming call, press and hold the call control button for 2 seconds to reject the call. Switching a call from phone to headset To switch an active call from your phone to your headset, press the call control button for 3 seconds.
Switching a call from headset to phone
To switch an active call from your headset to your phone, press and hold the call control button until you hear a tone.

MOVING OUT OF RANGE

As the headset moves more than 33 feet (10 meters) away from the Bluetooth device or encounters interference: Audio quality will degrade A beep will be heard in the headset when the connection drops between headset and Bluetooth device When out of range, only the power off function will operate If any of the above occur, move closer to your Bluetooth device to improve the connection between the two devices.

MULTIPOINT

USING MUL TIPOINT (MORE THAN ONE BLUETOOTH DEVICE)
Plantronics Discovery 650 supports multipoint technology, which permits simultaneous connections with two different Bluetooth audio devices. TO PAIR ANOTHER BLUETOOTH DEVICE Repeat the previous pairing steps with the new device. INITIATE A CALL The headset will assume you wish to initiate a call on the device recently used. To use the second device initiate the call using the controls on the second device. The second device forms the link with the headset. ANSWER A CALL An incoming call on either device will ring through the headset. In most cases, the ring tone from the device will transfer through to the headset, allowing the user to determine which device is ringing. In some cases, however, the headset applies a ring tone to the incoming call. In either case, the user will be able to determine which device is ringing through the distinct ring tone. To answer the call, press the call control button. TO ANSWER A CALL ON ONE DEVICE WHILE TALKING ON THE OTHER There is no function for placing one call on hold while answering another. Therefore, to answer the second call, the first call must be terminated. Terminate the first call by pressing the call control button once. Wait for the beep and then answer the second call by pressing the call control button again. If you choose not to answer the second call, and you have voice mail on the second device, the call will go to voice mail.

INDICATOR LIGHTS

Headset Status Powering on Power on Powering off Headset Indicator Light Blue light appears and flashes every 6 seconds. Blue light flashes every 5 seconds. Red light appears and goes off.
Power off Charging battery Battery fully charged Low battery Pairing mode Missed call Ringing Headset in pocket Online indicator (OLI) Red light glows continuously. Red light goes off. Red light flashes. Red then blue light flashes for 120 seconds. Purple light flashes every 5 seconds. Press any button to cancel. Purple light flashes rapidly. Headset vibrates to indicate incoming call. Blue light flashes every 10 seconds.

OPTIONAL ACCESSORIES

A AILABLE FOR PURCHASE V
73646-01 Vehicle power adapter
69519-05 USB headset charger
73647-01 Soft gel ear tips and ear loop

FOR USE WITH MOTOROLA

FOR USE WITH PALM

FOR USE WITH NOKIA

FOR USE WITH SONY ERICSSON
73649-01 AAA battery charger
73650-01 4-pack charge adapter kit
73651-01 Mini USB charger
To order, please contact your Plantronics supplier or go to www.plantronics.com.

TROUBLESHOOTING

PROBLEM My headset does not work with my phone. SOLUTION Headset was not in pairing mode when mobile phone menu selections were made. See page 5 and 6 Pairing. Incorrect menu selections were made on your mobile phone. See page 5 and 6 Pairing. I did not enter my passkey. Your phone did not locate the headset. Repeat the pairing process on page 5 and 6. Incorrect menu selections were made on your mobile phone. Repeat the pairing process on page 5 and 6. Callers cannot hear me. Mute is turned on. Press both sides of the volume/ mute button simultaneously. The headset is not turned on. Press the call control button for approximately 10 seconds until you hear a beep or see the indicator light glow blue to turn headset on. Your headset is out of range. Move the headset closer to the phone or Bluetooth device. Your headset battery is drained. Charge your battery using the AC charger or AAA battery. See page 4 Charging. The listening volume is too low. Press the volume/ mute button to increase the sound heard in the headset.

I cannot hear caller/ dialing tone.

PRODUCTSPECIFICATIONS

Talk time* Up to 5 hours Standby time* Approximately 70 hours /Up to 170 Hours with AAA Charger Charge time 3 hours Range Bluetooth standard 33 feet (10 meters) Power requirements 5V DC 180 mA Battery type Lithium Ion Version Bluetooth 1.2 Supports Bluetooth Hands-Free and Headset Profiles.
*Performance may vary by device.

TECHNICAL ASSISTANCE

Visit our Web site at www.plantronics.com/support for technical support including frequently asked questions, compatibility and accessibility information. The Plantronics Technical Assistance Center (TAC) is also ready to assist you on 866-363-BLUE (2583).

WARRANTY

LIMITED WARRANTY
This warranty covers defects in materials and workmanship of products
manufactured, sold or certified by Plantronics which were purchased and used in the United States.
The warranty lasts for one year from the date of purchase of the products. This warranty extends to you only if you are the end user with the original

purchase receipt.

We will at our option, repair or replace the products that do not conform to
the warranty. We may use functionally equivalent reconditioned/refurbished/ remanufactured/pre-owned or new products or parts.
To obtain service in the U.S., contact Plantronics at (866) 363-BLUE (2583). THIS IS PLANTRONICS COMPLETE WARRANTY FOR THE PRODUCTS. This warranty gives you specific legal rights, and you may also have other rights
that vary from state to state. Please contact your dealer or our service center for the full details of our limited warranty, including items not covered by this limited warranty.

REGULATORY NOTICES

EXPOSURE TO RF RADIATION
The internal wireless radio operates within the guidelines found in radio frequency safety standards and recommendations, which reflect the consensus of the scientific community. Independent studies have shown that the internal wireless radio is safe for use by consumers. Visit www.plantronics.com for more information. NOTE: Modifications not expressly approved by Plantronics, Inc. could void the user's authority to operate the equipment.

FCC REQUIREMENTS PART 15

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference, and 2. This device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception which can be determined by turning the radio or television off and on, the user is encouraged to try to correct interference by one or more of the following measures: 1. Reorient or relocate the receiving antenna. 2. Increase the separation between the equipment and receiver. 3. Connect the equipment into an outlet on another circuit. 4. Consult the dealer or an experienced radio/TV technician for help.
EXPOSURE TO RADIO FREQUENCY RADIATION
This device and its antenna must not be co-located or operated in conjunction with any other antenna or transmitter. To comply with FCC RF exposure requirements, only use supplied antenna. Any unauthorised modification to the antenna or device could void the users authority to operate this device.
Plantronics Inc 345 Encinal Street Santa Cruz, CA 95060 USA Tel: (800) 544-4660 www.plantronics.com
2006 Plantronics, Inc. All rights reserved. Plantronics, the logo design, Plantronics Discovery, QuickPair, and Sound Innovation are trademarks or registered trademarks of Plantronics, Inc. The Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by Plantronics, Inc. is under license. All other trademarks are the property of their respective owners. Patents U.S. 5,210,791 Patents Pending.

72448-08 (12-06)

Gua del usuario
Auricular Bluetooth con tecnologia multipunto

CONTENIDO

Contenido del paquete y funciones Carga Emparejamiento Encendido Ajuste Uso del auricular Multipunto Luces indicadoras Accesorios optativos Solucin de problemas Especificaciones del producto Asistencia tcnica Garanta Avisos sobre normativa 30 31

BIENVENIDO

Gracias por comprar un auricular Plantronics. Permtanos proporcionarle el mejor servicio y asistencia tcnica posibles. Despus de leer este manual, si necesita ayuda adicional o tiene cualquier pregunta acerca del producto, pngase en contacto con: Centro de asistencia tcnica de Plantronics, llamando al 866-363-BLUE (2583) www.plantronics.com/support Antes de empezar, lea el folleto de informacin sobre seguridad que se proporciona con el producto.

User Guide

Stylish Bluetooth Headset with Multipoint Technology

TABLE OF CONTENTS

Package Contents & Features Charging Pairing Powering Adjusting Fit Using Your Headset Multipoint Indicator Lights Optional Accessories Troubleshooting Product Specifications Technical Assistance Warranty Regulatory Notices 14 15

WELCOME

Thank you for purchasing a Plantronics headset. Let us provide you with the best possible service and technical support. After reviewing this user guide, if you need additional assistance or have any product questions, please contact: Plantronics Technical Assistance Center at 866-363-BLUE (2583) www.plantronics.com/support Please refer to the separate Safety Instructions booklet for important product safety information prior to installation or use of product.
REGISTER YOUR PRODUCT ONLINE
Visit www.plantronics.com/productregistration to register your product online so we can provide you with the best possible service and technical support.
PACKAGE CONTENTS&FEATURES
PLANTRONICS DISCOVERY 650E
Indicator light Call control button (on/off) Volume/mute button Microphone Ear loop Soft gel ear tips

small medium large

Headset charging pocket
PLANTRONICS DISCOVERY 650E ACCESSORIES
AAA battery AC charger AAA battery charger

CHARGING

PLANTRONICS Discovery 650E
Before using, you must first charge your headset. 1 hour = minimum charge 3 hours = full charge Option A: Using the included AC charger The indicator light glows red continuously while charging and turns off when fully charged. 1. Plug the AC charger into the base of the charging pocket and connect it to your power source. 2. Insert the headset into the charging pocket. Option B: Using a AAA battery One AAA battery recharges the headset to full capacity. 1. Twist the bottom of the AAA battery charger counterclockwise and release the battery holder. 2. Insert the battery into the AAA battery holder. 3. Slide the battery holder back into the battery charger and turn clockwise. 4. Snap battery charger onto charging pocket. Ensure that the indentation on the battery charger connector aligns with the shirt clip on the charging pocket. 5. Insert the headset into the charging pocket.

CAUTION

Only replace with a non-rechargeable AAA battery.

DISCONNECTING COMPONENTS

To separate components, grasp both the battery charger and the charging pocket with the shirt clip facing you. Bend the components back and they will snap apart. NOTE Do not twist the components apart.

PAIRING

This headset now comes with QuickPair technology so pairing with your Bluetooth phone is even easier. Follow the instructions below to pair your phone with your headset for the first time.
QUICKPAIR FEATURE INSTRUCTIONS
SETTINGS Time and Date Phone Settings Sound Settings Network Services Security Reset Settings

BLUETOOTH

Bluetooth

Discover/ Search

6XXPlantronics

PASSKEY

Step One: Prepare Phone Turn on Bluetooth For most phones, go to Settings/Tools menu and select Bluetooth or Connectivity and select On. (Or see the user guide for your phone.)
Step Two: Prepare Headset Pairing Mode Begin with headset turned off. Turn headset on (hold call control button for at least four seconds) and it will automatically go into pairing mode, flashing red and blue.
Step Three: Pairing Headset Passkey Add Headset to Phone For most phones, go to Settings/Tools > Bluetooth > Search or Add a Device, then Select 6XXPlantronics. For passkey enter 0000. Headset will flash blue when paired successfully. It is now powered on and ready to use.
NOTE: Normally you only need to pair the headset and handset once. If the headset has been previously paired with another device, follow pairing instructions on the next page.
If headset has been previously paired with another device, please follow these instructions for pairing a second time. Be sure the headset is fully charged. For set up and pairing instructions with other Bluetooth devices, please consult your Bluetooth device user guide or visit www.plantronics.com/easytopairan online, interactive pairing guide for phones and headsets. Begin with headset turned off. 1. Press and hold down the call control button for 10 seconds until the headset status indicator begins to flash red then blue. The headset is now in pairing mode for the next 120 seconds. 2. While the headset is flashing, use the phone menu to search for Bluetooth devices and select 6XXPlantronics. 3. When prompted for a passkey, enter 0000. Headset will flash blue when paired successfully.
To Disable Online and Standby Indicator Lights
When purchased the headset will have the online and standby indicator lights enabled. To disable these indicators, press the volume up button while turning the headset ON. To re-enable both indicator lights, turn the headset off; then press the volume up button again while turning the headset ON. NOTE: This process only disables online and standby indicator lights when headset is connected to mobile phone. All other indicator lights, such as low battery, will continue to function.

POWERING

1. Turn on the headset by pressing and holding the call control button until the indicator light glows blue. If you are wearing the headset, you will hear a beep when the power turns on. The indicator light will flash blue every 5 seconds when the power is on.
2. Turn off the headset by pressing the call control button for 6-8 seconds until the indicator light glows red or until you hear the beep. The indicator light remains unlit when the power is off.
CHARGE LEVELINDICATION When the headset is turned on, the indicator light will briefly show the headset charge level. 3 red flashes = greater than 2/3 battery charge 2 red flashes = 1/3 to 2/3 battery charge 1 red flash = less than 1/3 battery charge

ADJUSTING FIT

Right ear

Left ear

The Plantronics Discovery 650E headset comes with three soft gel ear tips and an optional ear loop. 1. The medium-sized ear tip is preinstalled and aligned for wearing on the right ear (R). 2. For left ear wearing, twist the ear tip counterclockwise. 3. Place the headset into your ear and check to see that it fits comfortably. If the headset is either too tight or too loose, remove the mediumsized ear tip from the headset by turning the ear tip to the centre or neutral position.
4. In the neutral position, the ear tip can easily be removed by pulling the ear tip directly away from the headset. Next, select the ear tip size that fits most comfortably in your ear. Hold the ear tip with the elongated edge pointing down toward the neutral position and then push the ear tip onto the headset. NOTE Choose an ear tip that is large enough such that it will not enter the ear canal. Do not insert the ear tip into the ear canal as it may become lodged in the ear canal. The ear tip should rest against the entrance to the ear canal.
USING THE OPTIONAL EAR LOOP
The ear loop may be attached to the headset to improve stability. 1. Remove the ear tip from the headset by turning the ear tip to the center or neutral position and pulling the ear tip away from the headset. 2. Attach the ear loop between the ear tip and the headset. 3. Replace the ear tip.

USING YOUR HEADSET

ANSWERING/ ENDING/MAKING CALLS
To answer or end a call, briefly press the call control button. To make a call, enter number on your phone, press send, and the call is automatically transferred to the headset; no need to press the call control button. NOTE When answering a call, wait until you hear a ring from the headset itself (not the ring from your phone), before pressing the call control button.

ADJUSTING VOLUME

To increase listening volume, press the upper end (+) of the volume/mute button. To decrease listening volume, press the lower end (-). WARNING: Do not use headphones/ headsets at high volumes for an extended period of time. Doing so can cause hearing loss. Always listen at moderate levels. See www.plantronics. com for more information on headsets and hearing.

AUTO ANSWER

Removing the headset from the pocket will automatically answer the call. Returning the headset to the charging pocket will end the call.

MUTEACALL

To turn the mute on while on a call, press both sides of the volume/mute button simultaneously until you hear a beep. To turn the mute off, press both buttons again.

ADDITIONAL FEATURES

Redialing last number To activate last number redial, double press the call control button. You will hear a high tone after each press. Using voice dialing With the headset on, press and hold the call control button for 2 seconds to activate voice dialing. NOTE To use voice activated dialing, the voice dialing feature must be enabled on your phone. See your Bluetooth phone manual for instructions. Rejecting a call When receiving an incoming call, press and hold the call control button for 2 seconds to reject the call. Switching a call from phone to headset To switch an active call from your phone to your headset, press the call control button for 3 seconds.
Switching a call from headset to phone
To switch an active call from your headset to your phone, press and hold the call control button until you hear a tone.

MOVING OUT OF RANGE

As the headset moves more than 33 feet (10 meters) away from the Bluetooth device or encounters interference: Audio quality will degrade A beep will be heard in the headset when the connection drops between headset and Bluetooth device When out of range, only the power off function will operate If any of the above occur, move closer to your Bluetooth device to improve the connection between the two devices.

MULTIPOINT

USING MUL TIPOINT (MORE THAN ONE BLUETOOTH DEVICE)
Plantronics Discovery 650 supports multipoint technology, which permits simultaneous connections with two different Bluetooth audio devices. TO PAIR ANOTHER BLUETOOTH DEVICE Repeat the previous pairing steps with the new device. INITIATE A CALL The headset will assume you wish to initiate a call on the device recently used. To use the second device initiate the call using the controls on the second device. The second device forms the link with the headset. ANSWER A CALL An incoming call on either device will ring through the headset. In most cases, the ring tone from the device will transfer through to the headset, allowing the user to determine which device is ringing. In some cases, however, the headset applies a ring tone to the incoming call. In either case, the user will be able to determine which device is ringing through the distinct ring tone. To answer the call, press the call control button. TO ANSWER A CALL ON ONE DEVICE WHILE TALKING ON THE OTHER There is no function for placing one call on hold while answering another. Therefore, to answer the second call, the first call must be terminated. Terminate the first call by pressing the call control button once. Wait for the beep and then answer the second call by pressing the call control button again. If you choose not to answer the second call, and you have voice mail on the second device, the call will go to voice mail.

INDICATOR LIGHTS

Headset Status Powering on Power on Powering off Headset Indicator Light Blue light appears and flashes every 6 seconds. Blue light flashes every 5 seconds. Red light appears and goes off.
Power off Charging battery Battery fully charged Low battery Pairing mode Missed call Ringing Headset in pocket Online indicator (OLI) Red light glows continuously. Red light goes off. Red light flashes. Red then blue light flashes for 120 seconds. Purple light flashes every 5 seconds. Press any button to cancel. Purple light flashes rapidly. Headset vibrates to indicate incoming call. Blue light flashes every 10 seconds.

OPTIONAL ACCESSORIES

A AILABLE FOR PURCHASE V
73646-01 Vehicle power adapter
69519-05 USB headset charger
73647-01 Soft gel ear tips and ear loop

FOR USE WITH MOTOROLA

FOR USE WITH PALM

FOR USE WITH NOKIA

FOR USE WITH SONY ERICSSON
73649-01 AAA battery charger
73650-01 4-pack charge adapter kit
73651-01 Mini USB charger
To order, please contact your Plantronics supplier or go to www.plantronics.com.

TROUBLESHOOTING

PROBLEM My headset does not work with my phone. SOLUTION Headset was not in pairing mode when mobile phone menu selections were made. See page 5 and 6 Pairing. Incorrect menu selections were made on your mobile phone. See page 5 and 6 Pairing. I did not enter my passkey. Your phone did not locate the headset. Repeat the pairing process on page 5 and 6. Incorrect menu selections were made on your mobile phone. Repeat the pairing process on page 5 and 6. Callers cannot hear me. Mute is turned on. Press both sides of the volume/ mute button simultaneously. The headset is not turned on. Press the call control button for approximately 10 seconds until you hear a beep or see the indicator light glow blue to turn headset on. Your headset is out of range. Move the headset closer to the phone or Bluetooth device. Your headset battery is drained. Charge your battery using the AC charger or AAA battery. See page 4 Charging. The listening volume is too low. Press the volume/ mute button to increase the sound heard in the headset.
I cannot hear caller/ dialing tone.

PRODUCTSPECIFICATIONS

Talk time* Up to 5 hours Standby time* Approximately 70 hours /Up to 170 Hours with AAA Charger Charge time 3 hours Range Bluetooth standard 33 feet (10 meters) Power requirements 5V DC 180 mA Battery type Lithium Ion Version Bluetooth 1.2 Supports Bluetooth Hands-Free and Headset Profiles.
*Performance may vary by device.

TECHNICAL ASSISTANCE

Visit our Web site at www.plantronics.com/support for technical support including frequently asked questions, compatibility and accessibility information. The Plantronics Technical Assistance Center (TAC) is also ready to assist you on 866-363-BLUE (2583).

WARRANTY

LIMITED WARRANTY
This warranty covers defects in materials and workmanship of products
manufactured, sold or certified by Plantronics which were purchased and used in the United States.
The warranty lasts for one year from the date of purchase of the products. This warranty extends to you only if you are the end user with the original

purchase receipt.

We will at our option, repair or replace the products that do not conform to
the warranty. We may use functionally equivalent reconditioned/refurbished/ remanufactured/pre-owned or new products or parts.
To obtain service in the U.S., contact Plantronics at (866) 363-BLUE (2583). THIS IS PLANTRONICS COMPLETE WARRANTY FOR THE PRODUCTS. This warranty gives you specific legal rights, and you may also have other rights
that vary from state to state. Please contact your dealer or our service center for the full details of our limited warranty, including items not covered by this limited warranty.

REGULATORY NOTICES

EXPOSURE TO RF RADIATION
The internal wireless radio operates within the guidelines found in radio frequency safety standards and recommendations, which reflect the consensus of the scientific community. Independent studies have shown that the internal wireless radio is safe for use by consumers. Visit www.plantronics.com for more information. NOTE: Modifications not expressly approved by Plantronics, Inc. could void the user's authority to operate the equipment.

FCC REQUIREMENTS PART 15

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference, and 2. This device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception which can be determined by turning the radio or television off and on, the user is encouraged to try to correct interference by one or more of the following measures: 1. Reorient or relocate the receiving antenna. 2. Increase the separation between the equipment and receiver. 3. Connect the equipment into an outlet on another circuit. 4. Consult the dealer or an experienced radio/TV technician for help.