BLUETOOTH HEADSET

Bedienungsanleitung Brugervejledning Gua del usuario Kyttopas Guide de l'utilisateur Guida dell'utente Gebruikershandleiding Brukerhndbok User Guide a
Manual do Utilizador Snabbstarthandbok Bruksanvisning

TABLE OF CONTENTS

EN ENGLISH
Welcome What is Bluetooth? Package Contents & Features Charging Pairing Custom Fit Headset Controls Stereo Headset Controls Indicators Range Hands-Free Features Optional Accessories Troubleshooting Product Specifications Technical Assistance 19

Plantronics Voyager 855

Welcome
Thank you for choosing the Plantronics Voyager 855 headset. To get the most from your new headset, we recommend that you take the following steps: 1. Read this User Guide, including all the safety information at the end of this guide, before you use your headset. If you need assistance, please do the following: Follow the steps in the Troubleshooting section on page 18. Contact the Plantronics Technical Assistance Center at www.plantronics.com/support.
. Visit www.plantronics.com/productregistration to register your headset online so we can provide you with the best possible service and technical support. NOTE: If you are considering returning the product, please contact the Technical

Assistance Center first.

What is Bluetooth?
Bluetooth wireless technology provides a way for devices to communicate with each other using short-range radio frequency instead of wires. Any two Bluetooth devices can communicate as long as they both have Bluetooth turned on, are within range and have been paireda quick handshake that connects the two devices. Bluetooth range is up to 10 metres. Obstructions, such as walls or other electronic devices, can cause interference or shorten the effective range. For optimal performance, place your headset and phone on the same side of your body.
Package Contents & Features

EN ENGLISH 1

1. Call control button (on/off). Mute microphone (Pause/Play*). Volume up/down (Track forward/back*)
. Extendable boom 5. Microphone port 6. Ear loop stabiliser 7. Stereo plug-in cable 8. Sound isolating ear bud (small, medium and large)

9. AC Charger 100 240V

* Stereo mode only and requires Bluetooth AVRCP (Audio Video Remote Control Profile). See Stereo Headset Controls on page 13 for details.

Charging

Before you use your headset for the first time, charge it for at least 1 hour. It takes approximately 3 hours to fully charge your headset. 1. Connect the charger cable to the headset. Plug the charger into a power outlet. While your headset is charging the indicator glows red. When your headset is fully charged, the indicator turns off.
WARNING: Do not use your headset while it is connected to the charger.

Check the charge level

When your headset is on, simultaneously press and hold the call control button and the volume down button for about two seconds. The indicator flashes red to show the charge level.

Battery Level

Red Flashes
More than 2/3 full 1/3 to 2/3 full Less than 1/3 full

Pairing

Pairing is the process of introducing your headset to your phone. Before using your headset for the first time, you must pair it with your Bluetooth phone. Normally you only need to pair your headset with your phone once.

QuickPair Technology

Your new headset includes Plantronics QuickPair technology to simplify the Bluetooth setup process. The first time you turn your headset on, your headset automatically enters pairing mode for 10 minutes. Once paired successfully, your headset stays on for instant use. If not successfully paired after 10 minutes, your headset automatically powers off. When you turn the headset on again, it automatically goes into pairing mode until successfully paired with a Bluetooth phone. To pair your headset for the first time: 1. Turn ON the Bluetooth feature on your phone.
TIP: For most phones, select Settings/Tools > Connections > Bluetooth > On. See your phones user guide for more information. Press and hold the call control button to turn on your headset. (The indicator flashes red/blue to show that the headset is on and in pairing mode.) TIP: If you dont see the red/blue flash, press and hold the call control button to turn your headset off, and then press and hold the call control button again until you see the red/blue flash. Use the commands on your phone to locate your headset. TIP: For most phones, select Settings/Tools > Connections > Bluetooth > Search > 8XXPlantronics. See your phones user guide for more information. When prompted for the passkey, enter 0000. When pairing is successful, the red/blue indicator on your headset turns off. Your headset is now connected and ready to use.

Subsequent Pairing

If youve already paired your headset with another device, follow these steps: 1. Turn ON the Bluetooth feature on your phone. TIP: For most phones, select Settings/Tools > Connections > Bluetooth > On. See your phones user guide for more information. Turn the headset off by pressing and holding the call control button until the indicator turns red and then turns off. Turn the headset back on by pressing and holding the call control button untilthe indicator flashes red/blue. The headset remains in pairing mode for 3minutes. Use the commands on your phone to locate your headset. TIP: For most phones, select Settings/Tools > Connections > Bluetooth > Search > 8XXPlantronics. See your phones user guide for more information. 5. When prompted for the passkey, enter 0000. When pairing is successful, the indicator on your headset turns off. Your headset is now connected and ready to use.

Custom Fit

The Plantronics Voyager 855 headset comes with three sizes of sound isolating ear buds. We recommend that you try all three ear buds to find the one that fits snugly in your ear. For added comfort and stability, you can add the optional small or large ear loop stabiliser. TIPS: For optimum performance and a secure and comfortable fit, the headset should sit snugly in your ear canal with the microphone pointing towards the corner of your mouth. If the ear bud is too big or too small, the headset may not stay in your ear or you may have difficulty hearing.

Put on the headset

1. Hold the headset with the boom pointing directly at your cheekbone and the ear bud placed comfortably in your ear canal. Gently twist the headset downward while pressing it into your ear canal.
TIP: For optimal voice clarity, point the boom towards the corner of your mouth. The ear bud should be fully seated to the speaker post to ensure secure attachment. WARNING: Select an ear bud that can be comfortably inserted into the ear canal. The ear bud should seal but not be forced down the ear canal. If the ear bud becomes lodged in the ear canal, seek medical attention immediately.
Choose an ear bud that fits
When the ear bud fits properly, it should be sealed in your ear so that you feel a slight amount of resistance when you remove the headset from your ear. 1. Remove the headset from your ear. Gently twist the ear bud while pulling it off the speaker post. Press a different ear bud onto the speaker post with the stem side of the ear bud facing downward. TIP: Try using different size ear buds on the headset and stereo plug-in cable. Do not assume that you need the same size for both ears.

EN ENGLISH Use the stereo plug-in cable
You can use the stereo plug-in cable to listen to music in stereo. 1. Insert the ear loop tab on the stereo cable into the slot on the underside of the headset until you feel it click into place. TIP: You can attach the ear loop on either side of your headset, so that you can wear the headset on your right or left ear. Drape the stereo plug-in cable across the back of your neck so that the headset hangs over one shoulder and the stereo ear bud hangs over the other shoulder.
. Guide the loop behind your ear. Gently twist the headset downwards while pressing it into your ear canal. Gently press the ear bud on the stereo cable inside your other ear canal. TIP: To remove the stereo plug-in cable from your headset, gently pull the ear loop straight out of its slot.
Use the optional ear loop stabiliSer
For increased stability, you can attach the optional small or large ear loop stabiliser. TIP: You can attach the ear loop stabiliser on either side of your headset, so that you can wear the headset on your right or left ear. 1. Insert the ear loop tab into the slot on the underside of the headset until you feel it click into place. Guide the loop behind your ear.
. Gently twist headset downward while pressing it into your ear. TIP: To remove the ear loop stabiliser from your headset, gently pull the ear loop straight out of its slot.

Headset Controls

Action Turn on the headset Steps Press and hold the call control button until the indicator glows blue. Note: When your headset is in standby mode, the indicator is off.
To confirm that your headset is on, press any button or slide the boom out. You should see a blue light flash or hear a tone.
Turn off the headset Answer a call
Press and hold the call control button until the indicator glows red. When the power is off, the indicator stays off. Press the call control button or slide the boom to the open position.
End a call Make a call Toggle mute on/off Turn off the online indicator Adjust volume
Briefly press the call control button or slide the boom to the closed position. The call automatically transfers to your headset after you enter the number on your phone and press send. Press the mute button. Press and hold mute for 2 seconds while the headset is on. Headset will flash blue 4 times. Repeat action to activate online indicators. Headset will flash blue 2 times. During an active call, press the volume button:

Volume up Volume down

WARNING: Do not use headphones/headsets at high volumes for an extended
period of time. Doing so can cause hearing loss. Always listen at moderate levels. See www.plantronics.com/healthandsafety for more information on headsets and hearing.
If youre wearing the headset, you hear ascending tones when the power turns on and descending tones when the power turns off. When you receive a call, your phone may ring before your headset rings. Wait until you hear the ring in your headset to press the call control button and answer the call. To reject a call and send the caller to voice mail, press the call control button for about 2 seconds. If your phone supports voice-dialling, see Hands-Free Features on page 16 and the instructions that came with your phone. When mute is on, a low tone plays every 60 seconds.

Stereo Headset Controls

For stereo listening, your Bluetooth device must support the Bluetooth Advanced Audio Distribution Profile (A2DP) profile. The A2DP profile defines how Bluetooth devices stream stereo quality audio from one device to another. For example, music streamed from a mobile phone to a wireless headset. If your Bluetooth device also supports the Audio/Video Remote Control Profile (AVRCP), you can use your headset to control music playback. For example, you can use functions such as pause, play, next/previous track and volume controls. If your device does not support the AVRCP profile, then you must use the controls on your device to control music playback.
1. Check your Bluetooth devices instruction manual to determine whether your device supports the A2DP and AVRCP profiles. Pair your Bluetooth device with your headset. See Pairing on page 6 for instructions. Open the music player on your Bluetooth device. Do any of the following: Action Play/Pause music Adjust volume Next track Steps Press the mute button. Press the volume button up/down to adjust the volume level. Press and hold the volume up button for about 2 seconds until you hear a tone indicating that the track has changed. To fast forward through tracks, press and hold volume up. Press and hold the volume down button for about 2 seconds until you hear a tone indicating that the track has changed. To fast rewind through tracks, press and hold volume down.

Previous track

Answering a call while listening Press the call control button or slide the to music boom to the open position. Note: When you receive a call, the music
pauses and the phone rings in your headset. When you end the call, the music resumes.
Reject a call while listening to music
Press the call control button for 2 seconds.

Indicators

Action Charging Fully charged Low battery Pairing Paired Turning on Standby Incoming call Call in progress Missed call Out of range Back in range Turning mute on Mute is active Unmute Turning off Light Solid red None 3 red flashes every 10 seconds Flashes red and blue Flashes blue Solid blue for 2 seconds None 3 blue flashes every 2 seconds 1 blue flash every 2 seconds 3 purple flashes every 10 seconds None None None None None Solid red for 4 seconds Tone None None 3 high tones every 10 seconds 1 low tone 1 low tone Ascending tones None 3 low tones every 2 seconds None None 1 high tone 1 low tone 1 low-high tone 1 low tone every 60 seconds 1 high-low tone Descending tones

NOTE: To turn off the online indicator, see Headset Controls on page 12.
To maintain a connection, keep your headset within 10 metres of the Bluetooth device. If there are obstacles between your headset and the device you may experience interference. For optimal performance, place your headset and phone on the same side of your body. As you move out of range, audio quality degrades. When you are far enough away to lose the connection, you hear a high tone in the headset. The headset attempts to reconnect after 30 seconds. If you move back in range later, you can manually reconnect by pressing the call control button. NOTE: Audio quality is also dependent upon the device with which the headset is

paired.

Hands-Free Features
If your phone and your wireless service provider both support hands-free operation, you can use the following features: Action Redial the last number you called Voice activated dialing Steps Double-click the call control button. You hear 2 low tones after the second press. When the headset is on, press and hold the call control button for about 2 seconds until you hear 1 low tone. When your headset rings, press and hold the call control button for about 2 seconds until you hear 1 long low tone.

Reject a call

Additional Features
Action Transfer a call from your headset to your phone Transfer a call from your phone to your headset Enable/Disable online indicators Listen to music Steps While a call is in progress, press and hold the call control button until you hear a low tone. While a call is in progress, quickly press and release the call control button. You will then hear a low tone. Press and hold mute for 2 seconds. Headset will flash blue 4 times. Repeat action to activate online indicators. Headset will flash blue 2 times. Press the mute button to play or pause the streaming music. Press and hold the volume up button for about 2 seconds to go to the next track. Press and hold the volume down button for about 2 seconds to go to the previous track.
NOTES: To listen to stereo music from your headset, your Bluetooth device must support the A2DP Bluetooth profile. To control music playback, your Bluetooth device must also support the AVRCP Bluetooth profile. When the online indicator is disabled, other indicators, such as low battery and missed call, still function.

Optional Accessories

Available for Purchase EN ENGLISH
76772-01 AC charger 100-240v 76775-01 Ear loop stabiliser (M/L) 77069-01 Ear loop stabiliser (S) 76016-01 USB charging cable
76777-01 Vehicle power charger
76774-01 Stereo plug-in cable
76776-01 Ear bud replacement pack (S, M, L)
To order, please contact your Plantronics supplier or go to www.plantronics.com/support.

Troubleshooting

Problem Solution
My headset does not Ensure that the headset is fully charged. work with my phone. Make sure headset is paired with the phone you are trying to use. Headset was not in discovery mode when mobile phone menu selections were made. See Pairing on page 6. Incorrect menu selections were made on your mobile phone. See Pairing on page 6. My phone did not locate the headset. I could not enter my passkey. I cannot hear caller/ dial tone. Turn both your phone and headset off and on, and then repeat the pairing process on page 6. Turn both your phone and headset off and on, and then repeat the pairing process on page 6. The headset is not turned on. Press the call control button for approximately 2 seconds until you hear a tone or see the indicator glow blue. Your headset is out of range. Move the headset closer to the phone or Bluetooth device. See Range on page 15. Your headset battery is drained. Charge your battery using the AC charger. See Charging on page 5. The listening volume is too low. Press the volume up button to increase the sound you hear in the headset. Make sure the ear bud fits properly. See Custom Fit on page 9. Make sure that you have a proper seal on the ear bud. See Custom Fit on page 9. For stereo listening, your Bluetooth device must support the Bluetooth Advanced Audio Distribution Profile (A2DP) profile. The A2DP profile defines how Bluetooth devices stream stereo quality audio from one device to another. For example, music streamed from a mobile phone to a wireless headset. Mute is turned on. Press the mute button. Your headset is out of range. Move the headset closer to the phone or Bluetooth device. See Range on page 15. Try a different size ear bud. See Custom Fit on page 9. Remove the ear bud from your headset and then wash the ear bud in warm soapy water. When the ear bud is completely dry, put it back on your headset. Use the ear loop stabiliser for increased lateral support. See Use the optional ear loop stabiliser on page 11. Try a different size ear bud. For a proper fit, the ear bud should create a seal. When the ear bud fits properly, you should feel a slight amount of resistance when you remove the headset from your ear. See page 9 for instructions on choosing an ear bud. Remove the ear bud from the headset and wash it in warm soapy water and rinse thoroughly. When the ear bud is completely dry, put it back on your headset.

Audio quality is poor. I cannot hear music.
Callers cannot hear me. The ear buds do not fit my ear.
My headset falls out of my ear.
My ear bud needs to be cleaned.

Product Specifications

Talk time* Standby time* Range Headset weight Headset weight with stereo plug-in cable Battery type Charge time Version Bluetooth profiles: battery enables up to 7 hours up to 160 hours up to 10 metres 11 grams 15 grams Lithium ion 3 hours for full charge Bluetooth 2.0 + EDR (Enhanced Data Rate) Headset profile (HSP) for talking on the phone. Hands-free profile (HFP) for talking on the phone and operating the phone. Advanced Audio Distribution Profile (A2DP) for receiving high-quality audio content. Audio/Video Remote Control Profile (AVRCP) for operating audio/video devices.
Stereo listening time* battery enables up to 6 hours
* Performance dependent on battery and may vary by device.

Technical Assistance

The Plantronics Technical Assistance Center (TAC) is ready to assist you. Visit us on the web at www.plantronics.com/support. You can also call the Technical Assistance Center for accessibility information: 014 in UK and 896 in Republic of Ireland.
Plantronics Inc 345 Encinal Street Santa Cruz, CA 95060 USA Tel: (800) 544-4660 Plantronics Ltd Wootton Bassett, UK Tel: Plantronics Ireland Citywest Business Campus Dublin 24 Office: +353 (0)Service ROI: 896 www.plantronics.com 2007 Plantronics, Inc. All rights reserved. Plantronics, the logo design, Plantronics Voyager, QuickPair, and Sound Innovation are trademarks or registered trademarks of Plantronics, Inc. The Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by Plantronics, Inc. is under license. Patents U.S. 5,210,791; and Patents Pending. 76518-03 (07-07)