3-299-319-12 (1)

Bluetooth Audio System
Operating Instructions Bedienungsanleitung Mode demploi Istruzioni per luso Gebruiksaanwijzing

GB DE FR IT NL

To cancel the demonstration (DEMO) display, see page 20. Zum Deaktivieren der Demo-Anzeige (DEMO) schlagen Sie bitte auf Seite 21 nach. Pour annuler la dmonstration (DEMO), reportez-vous la page 22. Per annullare la dimostrazione (DEMO), vedere pagina 21. Om de demonstratie (DEMO) te annuleren, zie pagina 22.

MEX-BT3600U

2008 Sony Corporation
Be sure to install this unit in the dashboard of the car for safety. For installation and connections, see the supplied installation/ connections manual.
Disposal of Old Electrical & Electronic Equipment (Applicable in the European Union and other European countries with separate collection systems)
This symbol on the product or on its packaging indicates that this product shall not be treated as household waste. Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. The recycling of materials will help to conserve natural resources. For more detailed information about recycling of this product, please contact your local Civic Office, your household waste disposal service or the shop where you purchased the product. Applicable accessory: Remote commander
This label is located on the bottom of the chassis. The nameplate indicating operating voltage, etc., is located on the bottom of the chassis.
Hereby, Sony Corp., declares that this MEXBT3600U is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. For details, please access the following URL: http://www.compliance.sony.de/ Use of this radio equipment is not allowed in the geographical area within a radius of 20 km from the centre of Ny-Alesund, Svalbard in Norway.
Disposal of waste batteries (applicable in the European Union and other European countries with separate collection systems)
This symbol on the battery or on the packaging indicates that the battery provided with this product shall not be treated as household waste. By ensuring these batteries are disposed of correctly, you will help prevent potentially negative consequences for the environment and human health which could otherwise be caused by inappropriate waste handling of the battery. The recycling of the materials will help to conserve natural resources. In case of products that for safety, performance or data integrity reasons require a permanent connection with an incorporated battery, this battery should be replaced by qualified service staff only. To ensure that the battery will be treated properly, hand over the product at end-of-life to the applicable collection point for the recycling of electrical and electronic equipment. For all other batteries, please view the section on how to remove the battery from the product safely. Hand the battery over to the applicable collection point for the recycling of waste batteries. For more detailed information about recycling of this product or battery, please contact your local Civic Office, your household waste disposal service or the shop where you purchased the product.
Notice for the customer in the countries applying EU Directives The manufacturer of this product is Sony Corporation, 1-7-1 Konan, Minato-ku, Tokyo, Japan. The Authorized Representative for EMC and product safety is Sony Deutschland GmbH, Hedelfinger Strasse 61, 70327 Stuttgart, Germany. For any service or guarantee matters please refer to the addresses given in separate service or guarantee documents.

ATRAC, ATRAC AD, SonicStage and their logos are trademarks of Sony Corporation. WALKMAN and WALKMAN logo are registered trademarks of Sony Corporation.
The Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by Sony Corporation is under license. Other trademarks and trade names are those of their respective owners.
Microsoft, Windows Media, and the Windows logo are trademarks or registered trademarks of Microsoft Corporation in the United States and/or other countries.
Warning if your cars ignition has no ACC position Be sure to set the Auto Off function (page 20). The unit will shut off completely and automatically in the set time after the unit is turned off, which prevents battery drain. If you do not set the Auto Off function, press and hold (OFF) until the display disappears each time you turn the ignition off.

Table of Contents

Welcome !. 5

Bluetooth function

Bluetooth operations. 15 Pairing. 15 About Bluetooth icons. 16 Connection. 16 To switch the Bluetooth signal output of this unit to on. 16 Connecting a cellular phone. 16 Connecting an audio device. 17 Handsfree calling. 17 Receiving calls. 17 Making calls. 17 Call transfer. 17 Voice Dial Activation. 17 Music streaming. 18 Listening to music from an audio device. 18 Operating an audio device with this unit. 18 Deleting registration of all paired devices. 18

Getting Started

Resetting the unit. 6 Preparing the card remote commander. 6 Setting the clock. 6 Adjusting the volume level of each device. 7 Detaching the front panel. 7 Attaching the front panel. 7
Location of controls and basic operations
Main unit. 8 Card remote commander RM-X304. 10 Searching for a track Quick-BrowZer. 11
Display items. 12 Repeat and shuffle play. 12

Other functions

Changing the sound settings. Adjusting the sound characteristics. Customizing the equalizer curve EQ3. Adjusting setup items SET. Using optional equipment. Auxiliary audio equipment. Rotary commander RM-X4S. 21
Storing and receiving stations. 12 Storing automatically BTM. 12 Storing manually. 12 Receiving the stored stations. 12 Tuning automatically. 12 RDS. 13 Overview. 13 Setting AF and TA. 13 Selecting PTY. 14 Setting CT. 14

Additional Information

Precautions. Notes on discs. About USB devices. Playback order of MP3/WMA/AAC files (CD-R/RW or Mass Storage Class). About MP3 files. About WMA files. About AAC files. About ATRAC files. About Bluetooth function. Maintenance. Removing the unit. Specifications. Troubleshooting. Error displays/Messages. 27 29

USB devices

USB device playback. 14 Display items. 14 Listening to music on a Mass Storage Class type audio device. 15 Listening to music on a Walkman (ATRAC Audio Device). 15

Welcome !

Thank you for purchasing this Sony Bluetooth Audio System. You can enjoy your drive with the following functions. CD playback You can play CD-DA (also containing CD TEXT) and CD-R/CD-RW (MP3/WMA/AAC files (page 23)).
Type of discs CD-DA Label on the disc

Caution

IN NO EVENT SHALL SONY BE LIABLE FOR ANY INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES OR OTHER DAMAGES INCLUDING, WITHOUT LIMITATION, LOSS OF PROFITS, LOSS OF REVENUE, LOSS OF DATA, LOSS OF USE OF THE PRODUCT OR ANY ASSOCIATED EQUIPMENT, DOWNTIME, AND PURCHASERS TIME RELATED TO OR ARISING OUT OF THE USE OF THIS PRODUCT, ITS HARDWARE AND/OR ITS SOFTWARE.

IMPORTANT NOTICE!

Safe and efficient use Changes or modifications to this unit not expressly approved by Sony may void the users authority to operate the equipment. Please check for exceptions, due to national requirement or limitations, in usage of Bluetooth equipment before using this product.

MP3 WMA AAC

Driving
Radio reception You can store up to 6 stations per band (FM1, FM2, FM3, MW and LW). BTM (Best Tuning Memory): The unit selects strong signal stations and stores them. RDS services You can use FM station with Radio Data System (RDS). Bluetooth function Handsfree calling with your cellular phone in the car. This unit can answer and redial. Music streaming from your cellular phone or portable audio device. HFP 1.5, HSP, A2DP and AVRCP profiles supported. Search function Quick-BrowZer: You can quickly and easily search for a track in the CD and USB device connected to this unit (page 11). Sound adjustment EQ3 stage2: You can choose any one of 7 preset equalizer curves. Digital Music Plus (DM+): Improves digitally compressed sound such as MP3. Optional device operation USB device: A Mass Storage Class USB device or Walkman (ATRAC Audio Device) can be connected to the front USB terminal. For details on usable devices, please refer to About USB devices (page 23) or the Sony support website (page 27). Auxiliary equipment connection An AUX input jack on the front of the unit allows connection of a portable audio device.
Check the laws and regulations on the use of cellular phones and handsfree equipment in the areas where you drive. Always give full attention to driving and pull off the road and park before making or answering a call if driving conditions so require.

Connecting to other devices
When connecting to any other device, please read its user guide for detailed safety instructions.

Radio frequency exposure

RF signals may affect improperly installed or inadequately shielded electronic systems in cars, such as electronic fuel injection systems, electronic antiskid (antilock) braking systems, electronic speed control systems or air bag systems. For installation or service of this device, please consult with the manufacturer or its representative of your car. Faulty installation or service may be dangerous and may invalidate any warranty that may apply to this device. Consult with the manufacturer of your car to ensure that the use of your cellular phone in the car will not affect its electronic system. Check regularly that all wireless device equipment in your car is mounted and operating properly.

Emergency calls

This Bluetooth car handsfree and the electronic device connected to the handsfree operate using radio signals, cellular, and landline networks as well as user-programmed function, which cannot guarantee connection under all conditions. Therefore do not rely solely upon any electronic device for essential communications (such as medical emergencies). Remember, in order to make or receive calls, the handsfree and the electronic device connected to the handsfree must be switched on in a service area with adequate cellular signal strength. Emergency calls may not be possible on all cellular phone networks or when certain network services and/or phone features are in use. Check with your local service provider.
Note on the lithium battery Do not expose the battery to excessive heat such as direct sunlight, fire or the like.
Getting Started Resetting the unit
Before operating the unit for the first time, or after replacing the car battery or changing the connections, you must reset the unit. Detach the front panel and press the RESET button with a pointed object, such as a ball-point pen.
RESET button Note Pressing the RESET button will erase the clock setting and some stored contents.
Preparing the card remote commander
Before using the card remote commander for the first time, remove the insulation film.
Tip For how to replace the battery, see Maintenance on page 25.

Setting the clock

The clock uses a 24-hour digital indication.
Press and hold the select button. The setup display appears. Press the select button repeatedly until CLOCK-ADJ appears. Press (SEEK) +. The hour indication flashes. Rotate the control dial to set the hour and minute. To move the digital indication, press (SEEK) /+. Press the select button. The setup is complete and the clock starts.
To display the clock, press (DSPL). Press (DSPL) again to return to the previous display.
Tip You can set the clock automatically with the RDS feature (page 14).
Attaching the front panel
Engage part A of the front panel with part B of the unit, as illustrated, and push the left side into position until it clicks.
Adjusting the volume level of each device
When connecting to a portable audio device via Bluetooth connection or AUX input jack, we recommend adjusting the volume level of the connected device, or adjusting the volume level for each connected device in the setup menu on this unit. For Bluetooth device, see Adjusting the volume level on page 18. For a device connected to AUX, see Adjust the volume level on page 21.
Detaching the front panel
You can detach the front panel of this unit to prevent theft.
Note Do not put anything on the inner surface of the front panel.

Caution alarm

If you turn the ignition switch to the OFF position without detaching the front panel, the caution alarm will sound for a few seconds. The alarm will only sound if the built-in amplifier is used.
Press (OFF). The unit is turned off. Press , then pull it off towards you.
Notes Do not drop or put excessive pressure on the front panel and display window. Do not subject the front panel to heat/high temperature or moisture. Avoid leaving it in a parked car or on a dashboard/rear tray. Do not detach the front panel during playback of the USB device, otherwise USB data may be damaged.

Main unit

BROWSE SEEK

PUSH SELECT /

SOURCE

BLUETOOTH

PTY ALBUM REP SHUF MIC PAUSE SCRL

AF / TA

Press (SOURCE) repeatedly until TUNER appears. To change the band, press (MODE) repeatedly. You can select from FM1, FM2, FM3, MW or LW. Press and hold the select button. The setup display appears. Press the select button repeatedly until BTM appears. Press (SEEK) +. The unit stores stations in order of frequency on the number buttons. A beep sounds when the setting is stored.
To change display items B, press (DSPL).
Tip Displayed items will differ, depending on the disc type, recording format and settings. For details on MP3/ WMA/AAC, see page 23.

Repeat and shuffle play

During playback, press (3) (REP) or (4) (SHUF) repeatedly until the desired setting appears.

To play

Storing manually

Select

TRACK ALBUM* SHUF ALBUM* SHUF DISC
track repeatedly. album repeatedly. album in random order. disc in random order. OFF
While receiving the station that you want to store, press and hold a number button ((1) to (6)) until MEM appears.
Note If you try to store another station on the same number button, the previously stored station will be replaced. Tip When an RDS station is stored, the AF/TA setting is also stored (page 13).
* When an MP3/WMA/AAC is played.
To return to normal play mode, select or SHUF OFF.
Receiving the stored stations
Select the band, then press a number button ((1) to (6)).

Tuning automatically

Select the band, then press (SEEK) /+ to search for the station. Scanning stops when the unit receives a station. Repeat this procedure until the desired station is received.
Tip If you know the frequency of the station you want to listen to, press and hold (SEEK) /+ to locate the approximate frequency, then press (SEEK) /+ repeatedly to fine adjust to the desired frequency (manual tuning).

Overview

FM stations with Radio Data System (RDS) service send inaudible digital information along with the regular radio program signal.

Setting AF and TA

Press (AF/TA) repeatedly until the desired setting appears.
AF-ON TA-ON AF, TA-ON AF, TA-OFF
activate AF and deactivate TA. activate TA and deactivate AF. activate both AF and TA. deactivate both AF and TA.
A TA/TP*1 B Radio band, Function, Frequency*2 (Program service name), Preset number, Clock, RDS data
*1 TA flashes during traffic information. TP lights up while such a station is received. *2 While receiving the RDS station, * is displayed on the left of the frequency indication.
Storing RDS stations with the AF and TA setting
You can preset RDS stations along with the AF/ TA setting. If you use the BTM function, only RDS stations are stored with the same AF/TA setting. If you preset manually, you can preset both RDS and non-RDS stations with the AF/TA setting for each. 1 Set AF/TA, then store the station with BTM or manually.

LOUD (Loudness) To allow you to listen clearly at low volume levels. LOUD-ON: to reinforce bass and treble. LOUD-OFF (z): to not reinforce bass and treble. DM+*2 To set the DM+ function. DM+-ON (z): to activate it. DM+-OFF: to cancel it. BTM (page 12) BT INIT*1 (page 18)
*1 When the unit is turned off. *2 When CD/USB source is activated. *3 When FM is received.

Using optional equipment

Auxiliary audio equipment
By connecting an optional portable audio device to the AUX input jack (stereo mini jack) on the unit and then simply selecting the source, you can listen on your car speakers. The volume level is adjustable for any difference between the unit and the portable audio device. Follow the procedure below:
Connecting the portable audio device
1 Turn off the portable audio device. 2 Turn down the volume on the unit. 3 Connect to the unit.
Connecting cord* (not supplied) * Be sure to use a straight type plug.

Adjust the volume level

Be sure to adjust the volume for each connected audio device before playback. 1 Turn down the volume on the unit. 2 Press (SOURCE) repeatedly until AUX appears. AUX FRONT IN appears. 3 Start playback of the portable audio device at a moderate volume. 4 Set your usual listening volume on the unit. 5 Press the select button repeatedly until AUX appears, and rotate the control dial to adjust the input level (8 dB to +18 dB).
The following controls on the rotary commander require a different operation from the unit. ATT (attenuate) button To attenuate the sound. To cancel, press again. SEL (select) button The same as the select button on the unit. During the Quick-BrowZer mode, (SEL) (select) is inactive. PRESET/DISC control CD/USB: The same as (1)/(2) (ALBUM /+) on the unit (push in and rotate). Radio: To receive stored stations (push in and rotate). VOL (volume) control The same as the control dial on the unit (rotate). SEEK/AMS control The same as (SEEK) /+ on the unit (rotate, or rotate and hold). DSPL (display) button To change display items.

Rotary commander RM-X4S

Attaching the label
Attach the indication label depending on how you mount the rotary commander.
Changing the operative direction
The operative direction of the controls is factoryset as shown below.

To increase

SEL MODE DSPL

DSPL MODE SEL

Location of controls
The corresponding buttons on the rotary commander control the same functions as those on this unit.

ATT SEL PRESET/ DISC

To decrease

If you need to mount the rotary commander on the right hand side of the steering column, you can reverse the operative direction. 1 While pushing the VOL control, press and hold (SEL).
SOURCE DSPL VOL SEEK/AMS OFF
Additional Information Precautions
If your car has been parked in direct sunlight, allow the unit to cool off before operating it. Power antenna (aerial) will extend automatically while the unit is operating.
Before playing, clean the discs with a commercially available cleaning cloth. Wipe each disc from the center out. Do not use solvents such as benzine, thinner, commercially available cleaners, or antistatic spray intended for analog discs.
Notes on CD-R/CD-RW discs
Some CD-Rs/CD-RWs (depending on the equipment used for its recording or the condition of the disc) may not play on this unit. You cannot play a CD-R/a CD-RW that is not finalized. The unit is compatible with the ISO 9660 level 1/ level 2 format, Joliet/Romeo in the expansion format, and Multi Session. The maximum number of: folders (albums): 150 (including root and empty folders). files (tracks) and folders contained in a disc: 300 (if a folder/file names contain many characters, this number may become less than 300). displayable characters for a folder/file name is 32 (Joliet), or 64 (Romeo). When the disc is recorded in Multi Session, only the first track of the first session format is recognized and played (any other format is skipped). The priority of the format is CD-DA and MP3/WMA/AAC. When the first track is a CD-DA, only CD-DA of the first session is played. When the first track is not a CD-DA, the MP3/ WMA/AAC session is played. If the disc has no data in any of these formats, NO MUSIC is displayed.

Moisture condensation

On a rainy day or in a very damp area, moisture condensation may occur inside the lenses and display of the unit. Should this occur, the unit will not operate properly. In such a case, remove the disc and wait for about an hour until the moisture has evaporated.
To maintain high sound quality
Be careful not to splash juice or other soft drinks onto the unit or discs.

Notes on discs

To keep a disc clean, do not touch its surface. Handle the disc by its edge. Keep your discs in their cases or disc magazines when not in use. Do not subject discs to heat/high temperature. Avoid leaving them in a parked car or on a dashboard/rear tray. Do not attach labels, or use discs with sticky ink/ residue. Such discs may stop spinning when used, causing a malfunction, or may ruin the disc.

Music discs encoded with copyright protection technologies
Do not use any discs with labels or stickers attached. The following malfunctions may result from using such discs: Inability to eject a disc (due to a label or sticker peeling off and jamming the eject mechanism). Inability to read audio data correctly (e.g., playback skipping, or no playback) due to heat shrinking of a sticker or label causing a disc to warp. Discs with non-standard shapes (e.g., heart, square, star) cannot be played on this unit. Attempting to do so may damage the unit. Do not use such discs. You cannot play 8 cm (3 1/4 in) CDs. This product is designed to play back discs that conform to the Compact Disc (CD) standard. Recently, various music discs encoded with copyright protection technologies are marketed by some record companies. Please be aware that among those discs, there are some that do not conform to the CD standard and may not be playable by this product.

Note on DualDiscs

A DualDisc is a two sided disc product which mates DVD recorded material on one side with digital audio material on the other side. However, since the audio material side does not conform to the Compact Disc (CD) standard, playback on this product is not guaranteed.

About USB devices

Mass Storage Class and ATRAC Audio Device type USB devices compliant with the USB standard can be used. However, this unit cannot recognize USB devices via a USB HUB. For details on the compatibility of your USB device, visit the Sony support website (page 27). Corresponding codec is different according to device type. Mass Storage Class: MP3/WMA/AAC ATRAC Audio Device: ATRAC/MP3/WMA/ AAC DRM (Digital Rights Management) files other than ATRAC cannot be played. The maximum number of displayable data is as follows. Mass Storage Class: folders (albums): 128, files (tracks) per folder: 500 ATRAC Audio Device: ATRAC/MP3/WMA/AAC albums/artists/playlists/genres: 65,535, tracks: 65,535
Notes When using a cable, use the one supplied with the USB device to connect. Do not use a USB device that is so large or heavy it may interfere with driving operations. Do not leave a USB device in a parked car, as malfunction may result. It may take time for playback to begin, depending on the amount of recorded data. Backup of data in a USB device is recommended.

About MP3 files

MP3, which stands for MPEG-1 Audio Layer-3, is a music file compression format standard. It compresses audio CD data to approximately 1/10 of its original size. ID3 tag versions 1.0, 1.1, 2.2, 2.3 and 2.4 apply to MP3 only. ID3 tag is 15/30 characters (1.0 and 1.1), or 63/126 characters (2.2, 2.3 and 2.4). When naming an MP3 file, be sure to add the file extension.mp3 to the file name. During playback or fast-forward/reverse of a VBR (Variable Bit Rate) MP3 file, elapsed playing time may not display accurately.

Note If you play a high-bit-rate MP3, such as 320 kbps, sound may be intermittent.

About WMA files

WMA, which stands for Windows Media Audio, is a music file compression format standard. It compresses audio CD data to approximately 1/22* of its original size. WMA tag is 63 characters. When naming a WMA file, be sure to add the file extension.wma to the file name. During playback or fast-forward/reverse of a VBR (Variable Bit Rate) WMA file, elapsed playing time may not display accurately.
* only for 64 kbps Note Playback of a lossless compression file is not supported.
Playback order of MP3/WMA/AAC files (CD-R/RW or Mass Storage Class)
MP3/WMA/AAC Folder (album) MP3/WMA/ AAC file (track)

About AAC files

AAC, which stands for Advanced Audio Coding, is a music file compression format standard. It compresses audio CD data to approximately 1/11* of its original size. AAC tag is 126 characters. When naming an AAC file, be sure to add the file extension.m4a to the file name. During playback or fast-forward/reverse of a VBR (Variable Bit Rate) AAC file, elapsed playing time may not display accurately.
* only for 128 kbps Note Playback of the following AAC files is not supported. lossless compression copyright-protected

About ATRAC files

ATRAC3plus format
ATRAC3, which stands for Adaptive Transform Acoustic Coding3, is audio compression technology. It compresses audio CD data to approximately 1/10 of its original size. ATRAC3plus, which is an extended format of ATRAC3, compresses the audio CD data to approximately 1/20 of its original size. The unit accepts both ATRAC3 and ATRAC3plus format. The characters for text information written by SonicStage are displayed.

About Bluetooth function

What is Bluetooth technology?
Bluetooth wireless technology is a short-range wireless technology that enables wireless data communication between digital devices, such as a cellular phone and a headset. Bluetooth wireless technology operates within a range of about 10 m (about 33 feet). Connecting two devices is common, but some devices can be connected to multiple devices at the same time. You do not need to use a cable for connection since Bluetooth technology is a wireless technology, neither is it necessary for the devices to face one another, such is the case with infrared technology. For example, you can use such a device in a bag or pocket. Bluetooth technology is an international standard supported by millions of companies all over the world, and employed by various companies worldwide.
Microwaves emitting from a Bluetooth device may affect the operation of electronic medical devices. Turn off this unit and other Bluetooth devices in the following locations, as it may cause an accident. where inflammable gas is present, in a hospital, train, airplane, or petrol station near automatic doors or a fire alarm This unit supports security capabilities that comply with the Bluetooth standard to provide a secure connection when the Bluetooth wireless technology is used, but security may not be enough depending on the setting. Be careful when communicating using Bluetooth wireless technology. We do not take any responsibility for the leakage of information during Bluetooth communication. Connection with all Bluetooth devices cannot be guaranteed. A device featuring Bluetooth function is required to conform to the Bluetooth standard specified by Bluetooth SIG, and be authenticated. Even if the connected device conforms to the above mentioned Bluetooth standard, some devices may not be connected or work correctly, depending on the features or specifications of the device. While talking on the phone hands free, noise may occur, depending on the device or communication environment. Depending on the device to be connected, it may require some time to start communication.

Back of the front panel

Notes For safety, turn off the ignition before cleaning the connectors, and remove the key from the ignition switch. Never touch the connectors directly with your fingers or with any metal device.
Notes on the lithium battery Keep the lithium battery out of the reach of children. Should the battery be swallowed, immediately consult a doctor. Wipe the battery with a dry cloth to assure a good contact. Be sure to observe the correct polarity when installing the battery. Do not hold the battery with metallic tweezers, otherwise a short-circuit may occur.

Removing the unit

Remove the protection collar. 1 Detach the front panel (page 7). 2 Engage the release keys together with the protection collar.

WARNING

Battery may explode if mistreated. Do not recharge, disassemble, or dispose of in fire.

Fuse replacement

When replacing the fuse, be sure to use one matching the amperage rating stated on the original fuse. If the fuse blows, check the power connection and replace the fuse. If the fuse blows again after replacement, there may be an internal malfunction. In such a case, consult your nearest Sony dealer.
Orient the release keys as shown.
3 Pull out the release keys to remove the protection collar.

Fuse (10 A)

Remove the unit. 1 Insert both release keys simultaneously until they click.

Hook facing inwards.

Wireless Communication
Communication System: Bluetooth Standard version 2.0 Output: Bluetooth Standard Power Class 2 (Max. +4 dBm) Maximum communication range: Line of sight approx. 10 m (33 ft)*1 Frequency band: 2.4 GHz band (2.4000 2.4835 GHz) Modulation method: FHSS Compatible Bluetooth Profiles*2: A2DP (Advanced Audio Distribution Profile) AVRCP (Audio Video Remote Control Profile) HFP (Handsfree Profile) 1.5 HSP (Headset Profile)
*1 The actual range will vary depending on factors such as obstacles between devices, magnetic fields around a microwave oven, static electricity, reception sensitivity, antennas perfomance, operating system, software application, etc. *2 Bluetooth standard profiles indicate the purpose of Bluetooth communication between devices.
2 Pull the release keys to unseat the unit.
3 Slide the unit out of the mounting.

Power amplifier section

Output: Speaker outputs (sure seal connectors) Speaker impedance: ohms Maximum power output: 52 W 4 (at 4 ohms)

General

Specifications

CD Player section

Signal-to-noise ratio: 120 dB Frequency response: 10 20,000 Hz Wow and flutter: Below measurable limit

Tuner section

Tuning range: 87.5 108.0 MHz Antenna (aerial) terminal: External antenna (aerial) connector Intermediate frequency: 10.7 MHz/450 kHz Usable sensitivity: 9 dBf Selectivity: 75 dB at 400 kHz Signal-to-noise ratio: 67 dB (stereo), 69 dB (mono) Harmonic distortion at 1 kHz: 0.5 % (stereo), 0.3 % (mono) Separation: 35 dB at 1 kHz Frequency response: 30 15,000 Hz
Tuning range: MW: 531 1,602 kHz LW: kHz Antenna (aerial) terminal: External antenna (aerial) connector Intermediate frequency: 10.7 MHz/450 kHz Sensitivity: MW: 30 V, LW: 40 V
Outputs: Audio outputs terminal (front/rear) Subwoofer output terminal (mono) Power antenna (aerial) relay control terminal Power amplifier control terminal Inputs: Telephone ATT control terminal Remote controller input terminal Antenna (aerial) input terminal AUX input jack (stereo mini jack) Tone controls: Low: 10 dB at 60 Hz (XPLOD) Mid: 10 dB at 1 kHz (XPLOD) High: 10 dB at 10 kHz (XPLOD) Power requirements: 12 V DC car battery (negative ground (earth)) Dimensions: Approx. 179 mm (7 1/7 1/8 in) (w/h/d) Mounting dimensions: Approx. 162 mm (7 1/1/1/2 in) (w/h/d) Mass: Approx. 1.2 kg (2 lb 11 oz) Supplied accessories: Card remote commander: RM-X304 Parts for installation and connections (1 set) Optional accessory: Rotary commander: RM-X4S
Your dealer may not handle some of the above listed accessories. Please ask the dealer for detailed information.

USB Player section

US and foreign patents licensed from Dolby Laboratories.
Interface: USB (Full-speed) Maximum current: 500 mA
MPEG Layer-3 audio coding technology and patents licensed from Fraunhofer IIS and Thomson. This product is protected by certain intellectual property rights of Microsoft Corporation. Use or distribution of such technology outside of this product is prohibited without a license from Microsoft or an authorized Microsoft subsidiary. Content providers are using the digital rights management technology for Windows Media contained in this device (WM-DRM) to protect the integrity of their content (Secure Content) so that their intellectual property, including copyright, in such content is not misappropriated. This device uses WM-DRM software to play Secure Content (WM-DRM Software). If the security of the WM-DRM Software in this device has been compromised, owners of Secure Content (Secure Content Owners) may request that Microsoft revoke the WM-DRM Softwares right to acquire new licenses to copy, display and/or play Secure Content. Revocation does not alter the WM-DRM Softwares ability to play unprotected content. A list of revoked WM-DRM Software is sent to your device whenever you download a license for Secure Content from the Internet or from a PC. Microsoft may, in conjunction with such license, also download revocation lists onto your device on behalf of Secure Content Owners.

Design and specifications are subject to change without notice.

Troubleshooting

The following checklist will help you remedy problems you may encounter with your unit. Before going through the checklist below, check the connection and operating procedures. If the problem is not solved, visit the following Support site.

Support site

If you have any questions or for the latest support information on this product, please visit the web site below: http://support.sony-europe.com General
No power is being supplied to the unit. Check the connection. If everything is in order, check the fuse. If the unit is turned off and the display disappears, it cannot be operated with the remote commander. t Turn on the unit. The power antenna (aerial) does not extend. The power antenna (aerial) does not have a relay box. No sound. The volume is too low. The ATT function is activated, or the Telephone ATT function (when the interface cable of a car telephone is connected to the ATT lead) is activated. The position of the fader control FAD is not set for a 2-speaker system. The Bluetooth audio device is in pause. t Cancel pause. No beep sound. The beep sound is canceled (page 20). An optional power amplifier is connected and you are not using the built-in amplifier. The contents of the memory have been erased. The RESET button has been pressed. t Store again into the memory. The power supply lead or battery has been disconnected. The power supply lead is not connected properly. Stored stations and correct time are erased. The fuse has blown. Makes noise when the position of the ignition is switched. The leads are not matched correctly with the cars accessory power connector. During playback or reception, demonstration mode starts. If no operation is performed for 5 minutes with DEMO-ON set, demonstration mode starts. t Set DEMO-OFF (page 20).
Halogenated flame retardants are not used in the certain printed wiring boards. Halogenated flame retardants are not used in cabinets. Packaging cushions are made from paper.
The display disappears from/does not appear in the display window. The dimmer is set DIM-ON (page 20). The display disappears if you press and hold (OFF). t Press and hold (OFF) on the unit until the display appears. The connectors are dirty (page 25). The Auto Off function does not operate. The unit is turned on. The Auto Off function activates after turning off the unit. t Turn off the unit. Card remote commander operation is not possible. Make sure the insulation film has been removed (page 6).

Weybridge, 25th March, 2008
Listen to all your digital music via USB or Bluetooth with new MEX-BT3600U in-car CD tuner
Simply plug in and play your favourite tunes on your car stereo via USB Enjoy your music wirelessly from your phone or MP3 player to your car stereo via Bluetooth New Quick-BrowZer interface for ultra quick searching through your MP3 music library Talk hands-free through your car stereo via Bluetooth
The new MEX-BT3600U in-car CD tuner lets you enjoy your personal music collection while youre on the move. Either plug in your USB digital music player, or enjoy high-quality stereo audio which can be streamed from a Bluetooth compatible WALKMAN or mobile phone through your cars speakers with no need for connecting wires. Whats more, the feature-packed head unit makes hands-free calling safe and easy with your Bluetooth mobile phone. As youd expect from the latest addition to Sonys in-car line-up, the MEX-BT3600U also offers superb sound quality plus a host of premium audio features. Simply plug in and play music via USB Even if youre not carrying a Bluetooth music source, the MEX-BT3600U lets you enjoy your personal music collection on the open road. A USB port on the front panel allows direct connection with compatible digital music players for pristine audio quality plus ultra quick searching from your MP3 music library to the 13-segment LCD display.** Finding your favourite MP3 tracks is simple thanks to a new Quick-BrowZer interface. This allows effortless browsing through your MP3 music library using the front panels rotary controller. For extra flexibility, theres also a front panel AUX input that connects with the headphone output of any personal audio player.
Enjoy your digital music wirelessly The MEX-BT3600U uses Bluetooth A2DP (Advanced Audio Distribution Profile) for high stereo quality digital audio streaming over a Bluetooth connection. This allows music stored on any A2DP enabled device to be enjoyed wirelessly through your vehicles speakers with superb clarity. A2DP is now supported by a growing choice of mobile phones by Sony Ericsson and Sonys new NWZ-A820 series WALKMAN Video/MP3 Players with Bluetooth stereo. An indicator on the head units display confirms connection with a nearby Bluetooth device. Bluetooth AVRCP (Audio/Video Remote Control Profile) allows control of Bluetooth music source functions like track skip and pause directly from your car stereo. Hands-free calling solution The elegantly styled MEX-BT3600U is ideal for anyone who needs to stay in touch on the road. The in-dash head unit links wirelessly to the growing range of mobile phones from Sony Ericsson and other manufacturers that support Bluetooth connectivity. At the touch of a button its easy to accept hands-free calls while youre driving, with no need for connecting cables, phone cradles or obtrusive car kits. To ensure clear dialogue during calls theres a sensitive, high-quality microphone with echo cancellation technology thats concealed behind the head units front panel. The other partys voice is heard with crystal clarity through your car speakers, so theres no need to wear a Bluetooth headset while youre at the wheel*. Music is paused automatically when a call is accepted and music resumes when the call is ended. Pristine audio from CD and other connected music sources comes as standard with the MEX-BT3600U. The DRIVE-S CD chassis teams precision 24-bit D/A conversion with 52W x 4 channels of super low distortion MOSFET power. Sonys original DM+ (Digital Music+) codec enhancer restores high frequencies that are often lost when music files have been compressed from a CD source. Three separate pre-outs are provided. Key head unit functions can be controlled using the supplied card-sized infrared remote. The Sony MEX-BT3600U in-car CD tuner with Bluetooth connectivity and USB will be available throughout Europe from May 2008.
* Sound quality is dependent on cabin noise levels and/or distance from sound source. ** Please refer to list of compatible Bluetooth & USB devices: http://support.sony-europe.com/eve/audio/audio.asp?site=odw%5Fen%5FGB

- Ends NOTES TO EDITORS Environmental Info
Sony is engaged in a constant review of its manufacturing, operational and business practices to ensure that its products are developed in an environmentally responsible way. This approach can broadly be divided into three areas:
Environmental Information: 3Ps
The MEX-BT3600 in-car tuner consumes less than 3.0mA in Standby mode, which reduces drain on battery and hence lowers fossil fuel consumption to charge battery using vehicles engine
The packaging cushions used to protect In Car Audio Products during transport are made from paper, which is easily recyclable. Halogenated materials may pose a risk to the environment if disposed of improperly. To minimize this risk for the MEX-BT3600U in-car CD tuner, the flame retardants of all cover/housing parts and the printed circuit boards are halogen-free.
Sony is determined to lead the way as a responsible manufacturer, and as a result we are focussing on three key areas of investment: 1. 2. 3. Reducing CO2 gas emissions Increasing the percentage of renewable energy used in manufacturing facilities Minimising the resources used by our factories in manufacturing
For more information, please contact: Silke Schild, Corporate Communications, Sony Europe silke.schild@eu.sony.com / +44 (0)507 About Sony: Sony manufactures audio, video, communications and information technology products for the global consumer and professional markets. With its music, pictures, game and online businesses, Sony is uniquely positioned to be one of the worlds leading digital entertainment brands. Sony recorded consolidated global annual sales of EUR 55.83 billion (yen 8,296 billion) for the fiscal year ended March 31, 2007, based on an average market exchange rate for the same period of yen 148.6 to the EUR. It employs approximately 163,000 people worldwide. In Europe, the Sony Group recorded consolidated annual sales of EUR 13.71 billion (yen 2,038 billion) for the fiscal year ended March 31, 2007. Sony Europe, headquartered at the Sony Center am Potsdamer Platz in Berlin, is responsible for the company's European electronics business and registered consolidated sales of EUR 9.12 billion for the same period. For more information on Sony Europe, please visit http://www.sony-europe.com and http://www.sony-europe.com/presscenter