Reviews & Opinions
Independent and trusted. Read before buy Nokia 2115!

Nokia 2115

Manual

Preview of first few manual pages (at low quality). Check before download. Click to enlarge.
Manual - 1 page  Manual - 2 page  Manual - 3 page 

Download (Portuguese)
Nokia 2115 Mobile Phone, size: 1.2 MB
Related manuals
Nokia 2115I Quick Start Guide
Nokia 2115I

Instruction: After click Download and complete offer, you will get access to list of direct links to websites where you can download this manual.

About

Nokia 2115Nokia 2115, 2116, 2125, 2112, & 3100 Black Sturdy and Durable pc
With its 360-degree rotational belt clip, this plastic swivel holster provides you with comfort and freedom of movement. Keep it in an upright position when you're on the move. And when you have a minute to sit down, you can adjust it so it's parallel with your belt. It's rigid enough to prevent any unintended phone calls.

Details
Brand: Cellet
Part Number: HLNOK2115P
UPC: 800768521010

 

[ Report abuse or wrong photo | Share your Nokia 2115 photo ]

User reviews and opinions

<== Click here to post a new opinion, comment, review, etc.

No opinions have been provided. Be the first and add a new opinion/review.

 

Documents

doc0

The battery

Important: Always switch the phone off and disconnect the charger before removing the battery. Before removing the cover, always switch off the power and disconnect the charger and any other phone. Avoid touching electronic components while changing the covers. Always store and use the phone with the covers attached.

Remove the back cover

1. With the back of the phone facing you, push down on the button on the back of the phone. 2. Slide the back cover toward the bottom of the phone and remove.

Remove the battery

After you have removed the back cover, insert your finger into the finger grip and lift the battery from its compartment.

Replace the battery

Always use original Nokia batteries. See "Battery information," page 74. 1. Position the battery so the gold-colored contacts match up with those on the phone. The battery label must face away from the phone. 2. Insert the battery, gold-colored contact end first, into the battery slot. 3. Push down on the other end of the battery to snap the battery into place.

Replace the back cover

Slide the back cover toward the top of the phone until you hear a click and see the back cover release button.

Charge the battery

1. Plug the charger transformer into a standard AC outlet. 2. Insert the charger output plug into the round jack at the bottom end of the phone. After a few seconds, the battery indicator in the display starts to scroll from bottom to top. If the battery is completely drained, it may take a few minutes before the charging indicator appears on the display or any calls can be made.

Switch on or off

To switch your phone on or off, press and hold the power key on top of the phone for at least 3 seconds.

Connect the headset

A compatible headset may be included with your phone or purchased separately as an enhancement. See "Enhancements," page 71. 1. Plug the headset connector into the Pop-Port connector at the bottom end of your phone. 2. Position the headset on your ear. With the headset connected, you can make, answer, and end calls as usual. Use the keypad to enter numbers. Press Call to place a call. Press End to end a call.

Change Xpress-on covers

Before removing the cover, always switch off the power and disconnect the charger and any other phone. Avoid touching electronic components while changing the covers. Always store and use the phone with the covers attached.
Remove the back cover and the battery
For instructions on removing the back cover and the battery, see "Remove the back cover," page 16 and "Remove the battery," page 16.

Remove the front cover

Gently pull the bottom of the front cover away from the rest of the phone, and remove the front cover.

E-mail address entry

1. Highlight the e-mail address entry you would like to send or update, and select Options. 2. Select one of the following options: Send e-mailSend an e-mail. Edit detailEdit existing details of e-mail. Delete detailDelete existing e-mail. ViewView the details of the e-mail contact. Change typeChange the e-mail type to E-mail, Web address, Street addr., or Note. Add detailAdd an address or note to the entry. Add numberAdd a number to the entry. Caller groupsAdd the e-mail to an existing caller group. Custom toneAdd a custom ringtone to the contact. Send bus. cardSend the contact a business card. Edit nameEdit the name of the contact. View nameView the name of the contact. DeleteDelete the entire e-mail entry from your contacts list.

Edit other text items

1. Highlight the address entry you would like to edit, and select Options. 2. Select the option you wish to perform and OK.
Send and receive contacts (business cards)
You can send and receive an entry in your contacts list using a text message.

Send a business card

You can send a business card as a text message to a compatible phone. Note: Multiple text messaging charges may apply. Check with Virgin Mobile for details. 1. At the main screen, scroll down to display the contents of your contacts list. 2. Highlight an entry from the contacts list that you wish to send, and select Details > Options > Send bus. card. 3. To send the business card as a message, select Via text msg. If the contact entry has more than one item saved, select Primary no. or All details. 4. Enter the number for your recipient, or select Search to retrieve a number from your contacts list. 5. Select OK. The business card is sent.

My Account

5. My Account
You can access your Virgin Mobile account to check or add money to your balance.

Check account balance

To retrieve your account balance, select Menu > My Account > Check balance. The current balance will be sent to your phone as a Virgin Alert. See "Virgin Alerts," page 43. Note: When your account has no balance, calls may only be possible to the official emergency number programmed into the phone.

Insert word or Edit wordEnter or edit the text of a new word that might not appear in the predictive text dictionary. This displays only when Predictive text is set to On. Insert symbolInsert a special character into your message. This displays only when Predictive text is set to On. Predictive textChoose a predictive text language to turn predictive text on, or select Prediction off to turn it off. MatchesView matching words found in the dictionary for the word you want to use. This displays only when Predictive text is set to On and when the same set of key strokes can produce multiple words.
Create a distribution list
1. At the main screen, select Menu > Messaging > Text messages > Distribution lists > Options > Add list. 2. Enter a name for the list, and select OK. 3. To add contacts to this list, select Options > Add contact. 4. Add the contacts one by one to this list.
Send a message to a distribution list
1. At the main screen, select Menu > Messaging > Text messages > Create message. 2. Select Add list, scroll to a distribution list, and select OK. 3. Select Options > Enter text. 4. Compose a message using the keypad, and select Options > Send. 5. Select Options > Send. Your message is then sent to each of the recipients in the list. You may incur separate charges for sending a single message to multiple recipients. For pricing, check with Virgin Mobile.

Read a message

When you receive a message, a notification message displays and is displayed. When you have unopened messages in your inbox, is shown in the upper left corner of the main screen as a reminder.
1. Select Show to read the message, or Exit to decline notification. 2. Scroll up or down to view the whole message if necessary.
Options while reading a message
When you read a text message, the following options are available: DeleteDiscard the message. ReplyReply to the message. Create the message, and select Options > Send. The senders phone number or e-mail is used as the default Use numberSelect Save, Add to contact, Send message, or Call. SaveSave the message to a folder. Save addressSaves an e-mail address to a contact. This option appears if the message contains an e-mail address. ForwardForward the message to another phone number. RenameEdit the title of the message.

Voice messages

When you receive a voice message, your phone displays a notification and may beep or vibrate. If you receive more than one message, your phone shows the number of messages received.
Call and set up your voicemail
1. Press and hold 1. 2. When you connect to voicemail and the prerecorded greeting begins, follow the automated instructions to set up your voicemail. Note: You may incur airtime charges for calls into your voicemail. Check with Virgin Mobile for pricing.
Listen to your voice messages
Use one of the following ways to listen to voice messages: Press and hold 1. Select Listen if there is a notification message in the display. At the main screen, select Menu > Messaging > Voice messages > Listen to voice messages. When you connect and the prerecorded greeting begins, follow the automated instructions to listen to your voice messages.

Automate voicemail

To automatically access your voicemail messages, you can insert special characters called dialing codes into phone numbers and save the number to a speed dial location. Dialing codes instruct the receiving system to pause, wait, bypass, or accept the numbers that follow them in the dialing string. Voicemail services vary by service provider. The following instructions are examples of common operations. Please check with Virgin Mobile for specific instructions for using your voicemail service.
Voicemail box number and process
1. Write down your voicemail box number. 2. Call and check your voicemail as you normally would. 3. Write down your step-by-step interaction with the recorded prompts. Remember that each voicemail service varies. Your steps may resemble the following:
Dial 2145551212, pause 5 seconds, press 1, pause 2 seconds, press 1234 and *. Be precise; you need this information to set up your voicemail with dialing codes.

Dialing codes

Press * repeatedly to cycle through dialing codes. When the desired code appears in the display, pause briefly and the code is inserted into the dialing string. The following dialing codes are available:

Dialing code

* + p w
Bypasses a set of instructions. Causes the International access code to be replaced by +. Pauses for 2.5 seconds before sending any numbers that follow. Waits for you to press Call before sending the numbers or codes that follow.
Speed dial voicemail with dialing codes
1. At the main screen, select Contacts > Speed dials. 2. Scroll to an empty speed dial slot, and select Assign. 3. Enter your voicemail box number, including the area code. 4. Refer to "Dialing codes" and enter codes as necessary using the information that you saved from "Voicemail box number and process," page 44. For example, if you pause for 5 seconds after connecting to voicemail, enter the dialing code p twice after the voicemail box number (for example, 2145551212pp). 5. Enter any remaining numbers, dialing codes, or other information that allows you to listen to your messages and select OK. 6. Enter a name for the number (such as voicemail), and select OK. To dial and listen to your voicemail, press and hold the assigned speed dial key at the main screen.

Exit VirginXtras

To exit VirginXtras, press and hold End.

Recent calls

8. Recent calls
Recent calls stores information about the last 20 missed, 20 received, or 20 dialed calls. It also adds the total duration of all calls. When the number of calls exceeds the maximum, the most recent call replaces the oldest. Whether viewing missed, incoming, or outgoing calls, the menu options are the same: Call timeDisplay the date and time of the call. Send messageSend a message to the number. View numberDisplay the number. Use numberMake a call using the number. SaveEnter a name for the number and save it to your contacts list. Add to contactAdd the number to an existing entry in your contacts list, if the number is not associated with a name. DeleteClear the number from memory. CallCall the number.

View missed calls

Missed calls are calls that were either declined or never answered. The missed calls feature does not function when your phone is switched off. 1. If a missed call notification appears in the display, select List; otherwise, from the main screen, select Menu > Recent Calls > Missed calls. 2. When the phone number appears in the display, select Options. 3. Select an option.

View incoming calls

Incoming calls are calls that have been answered. 1. At the main screen, select Menu > Recent Calls > Incoming calls. 2. Select a name or number and Options. 3. Select an option.

Outgoing calls

Outgoing calls are previous numbers you have dialed from your phone: 1. At the main screen, press Call, or select Menu > Recent calls > Outgoing calls. 2. Select a name or number and Options. 3. Select an option.

Call times

You can make or receive calls to or from the same number and view the time each call occurred. Your clock must be set for this feature to work accurately. 1. While viewing a missed, incoming, or outgoing call, select Options > Call time. 2. Scroll down to view the most recent call times from this number. 3. Select Back to return to the options list.

Delete recent calls

You can delete any missed, incoming, or outgoing calls from phone memory. 1. At the main screen, select Menu > Recent calls > Delete recent call lists. 2. Select the call type you would like to clear: All, Missed,Incoming, or Outgoing.

Settings

9. Settings
Use this menu to set or change profiles, tone settings, call settings, phone settings, phone details, time and date settings, voice navigation, enhancement settings, security settings, or to restore the factory settings.

Profiles

Profiles define how your phone reacts when you receive a call or message, how your keypad sounds when you press a key, and more. Ringing options, keypad tones, and other settings for each of the available profiles can be customized or left at their default setting. The following profiles are available: Normal, Silent, Meeting, Outdoor, and Pager. Profiles are also available for enhancements such as a headset and car kit. See "Enhancement settings," page 58.

Activate

1. At the main screen, select Menu >Settings > Profiles. 2. Select the profile of your choice. 3. Select Activate.

Personalize a profile

You can personalize any of the profiles a variety of ways. 1. At the main screen, select Menu >Settings > Profiles. 2. Select the profile you wish to customize. 3. Select Customize. 4. Select the option you want to customize: Incoming call alert, Ringtone, Ringtone volume, Vibrating alert, Message alert tone, Keypad tones, Warning tones, Alert for, or Profile name. You cannot rename the Normal profile. Select Alert for to set the phone to ring only upon calls from phone numbers that belong to a selected caller group. Scroll to the caller group you want or All calls, and select Mark or Unmark > Done. To set the phone to ring for every call, select All calls > Mark > Done.

Changing your ringtone

Your can select from many ringtones, including your downloaded ringtones, that appear in the list in your profiles. 1. From the main screen, select Menu >Settings > Profiles > Normal, Silent, Meeting, Outdoor, or Pager. 2. Select Customize > Ringtone and select a ringtone from the list.

Set a timed profile

Timed profiles can be used to prevent missed calls. For example, you attend an event that requires your phone be set to Silent before the event starts, but you forget to return it to Normal until long after the event. A timed profile can prevent missed calls by returning your phone to the default profile at a time you specify. Timed profiles can be set up to 24 hours in advance. 1. At the main screen, select Menu >Settings > Profiles. 2. Select the profile you wish to activate. 3. Select Timed. 4. Enter the time for the profile to expire, and select OK.

Tone settings

From this menu, you can adjust the ringtone volume, keypad tones, and other tone settings for the currently active profile. You can also set the phone to ring for calls from phone numbers that belong to a selected caller group. See "Personalize a profile," page 50.

Calling card

If you use a calling card for long distance calls, you can save the calling card numbers in your device. Your device can store up to four calling cards.

Save information

1. In standby mode, select Menu > Settings > Call settings > Calling card. 2. Enter your security code, and select OK. 3. Scroll to one of the four memory locations, and select Options > Edit > Dialing sequence. 4. Select one of the following sequence types: Access no. + phone no. + card no.Dial the calling card access number, phone number, card number, and PIN, if required. Access no. + card no. + phone no.Dial the calling card access number, card number, PIN (if required), and phone number. Prefix + phone no. + card no.Dial the prefix (numbers that must precede the phone number), phone number, card number, and PIN (if required). 5. Enter the required information (access number or prefix and card number), and select OK to confirm your entries. 6. Select Card name. 7. Enter the card name, and select OK. Contact your calling card company for more information.

Make calls

After you have saved your calling card information in your device, you can make a call using your calling card. 1. In standby mode, select Menu > Settings > Call settings > Calling card. 2. Enter your security code, and select OK. 3. Scroll to the calling card of your choice, and select Options > Select > OK. 4. Press the end key to return to the standby screen; then enter the phone number, including any prefix (such as 0 or 1) that your calling card may require when you make a calling card call. See your calling card for instructions. 5. Press and hold the call key for a few seconds until Card call is displayed. 6. When you hear the tone or system message, select OK.

Call Summary

Your phone can display the time spent on a call when you hang up. At the main screen, select Menu > Settings > Call settings > Call summary > On or Off.

Phone settings

Phone language
1. At the main screen, select Menu > Settings > Phone settings > Phone language. 2. Select the language of your choice. The language setting may affect the time and date formats of the clock, alarm clock, and calendar.

Automatic keyguard

You can set the keypad of your phone to lock automatically after a preset time delay. 1. At the main screen, select Menu > Settings > Phone settings > Automatic keyguard > On or Off. 2. If you select On, Set delay: is displayed. 3. Enter the delay time (in minutes and seconds), and select OK. When keyguard is on, it may be possible to dial the emergency number programmed into your phone.

Activate a voice command

After you have associated a voice command with a phone function, you can request the function by speaking the voice command. 1. At the main screen, select and hold Contacts. 2. When Speak now appears, speak the voice command clearly into the phone. When the phone finds the voice command, Found: appears, and the phone plays the recognized voice command through the earpiece. The function you requested is activated.

Voice command options

After you have associated a voice command with a function, select one of the following options: PlaybackListen to the voice command. ChangeChange the voice command. DeleteErase the voice command.

Enhancement settings

The enhancement settings menu is shown only if the phone has been connected to a compatible enhancement. At the main screen, select Menu > Settings > Enhancement settings > Headset, Handsfree, Loopset, or Charger and the desired accessory.

Security settings

Phone lock
The phone lock feature protects your phone from unauthorized outgoing calls or unauthorized access to information stored in the phone. When phone lock is activated, Phone locked is displayed each time you turn your phone on. When the phone is locked, calls still may be possible to the official emergency number programmed into your phone. 1. At the main screen, select Menu > Settings > Security settings. 2. Enter the lock code, and select OK. 3. Select Phone lock and one of the following options: OffImmediately turns off the phone lock feature. Lock nowTurns the phone lock feature on immediately. On power-upTurns the phone lock feature on immediately after the phone is turned off and then on. Call not allowed is displayed if you attempt to place a call while the phone is locked. To answer a call with phone lock on, select Answer, or press Call.
Allowed phone number when phone locked
When phone lock is on, the only outgoing calls that can be made are to the emergency number programmed into your phone (for example, 911 or other official emergency number) or the number stored in the Allowed number when phone locked location. 1. At the main screen, select Menu > Settings > Security settings. 2. Enter the lock code, and select OK. 3. Select Allowed number when phone locked. 4. Enter the phone number and select Assign if the slot is emply; or select Options > Change to change the phone number. Search, recall the number from the phone book, and select OK.

Change the lock code

Tip: Avoid using codes similar to emergency numbers such as 911 to prevent accidental dialing of the emergency number. The lock code controls access to features and is supplied with the phone. The preset lock code is the last four digits of your phone number. When you change the lock code, keep the new code secret and in a safe place separate from your phone. 1. At the main screen, select Menu > Settings > Security settings. 2. Enter the current lock code (the default is the last four digits of your phone number), and select OK. 3. Select Change lock code. 4. Enter the new lock code (4 characters), and select OK. 5. Reenter the new lock code for verification, and select OK.

Restrict calls

Call restriction is a network service. See "Network Services," page 8. You can restrict the calls your phone can make and receive. When calls are restricted, calls still may be possible to the official emergency number programmed into your phone. 1. At the main screen, select Menu > Settings > Security settings. 2. Enter the lock code, and press OK. 3. Select Call restrictions and the types of calls you wish to restrict: Restrict outgoing callsCalls cannot be made. Restrict incoming callsCalls cannot be received. 4. Select one of the following options: SelectRestricts a specific number or All calls. Select Mark to enable a restriction. Add restrictionEnter a specific number and name, or select Search to enter a number from the contacts list. EditAllows you to edit previously entered restricted numbers. DeleteAllows you to delete previously entered restricted numbers.

Restore factory settings

You can reset some of the menu settings to their original values. Data that you have entered or downloaded is not deleted (for example, entries in your contacts list are not affected). 1. At the main screen, select Menu > Settings > Restore factory settings. 2. Enter the lock code (the default lock code is the last four digits of your phone number), and select OK.

10. Tools

Your phone features some helpful tools, including an alarm clock, calendar, voice memo, calculator, countdown clock, and stopwatch.

Alarm clock

Set an alarm
The alarm clock is based on the phone clock. It sounds an alert any time you specify and works even when the phone is turned off. 1. At the main screen, select Menu > Tools > Alarm clock. If the alarm has been previously set, select On. 2. Enter the time for the alarm in hh:mm format, and select OK. 3. Select am or pm if 12-hour format has been selected. Alarm on appears briefly in the display, and appears on the main screen.

Receive notes

When you receive a calendar note, your phone displays notification that the calendar note arrived. Save the note in your calendar, and set an alarm for any date and time.

View notes

1. When your phone displays notification that the calendar note arrived, select Show. 2. Scroll to view the entire message, if necessary.

Save notes

After viewing the calendar note, select Options > Save.

Discard notes

After viewing the calendar note, select Options > Discard.

Voice memo

This feature allows you to record a speech or sound memo with your phone and listen to it later. The total available time is 60 seconds if no memos have been stored. The maximum length of a recording depends on how much memory remains available. The recorder cannot be used when you are using VirginXtras.

Record speech or sound

1. At the main screen, select Menu > Tools > Voice memo > Record. 2. After the recorder start tone is heard, begin recording speech or sound. 3. When you are finished recording, select Stop. 4. Type in a name for the recording, and select OK. The recording is saved to the recording list.

Record list options

1. When you have saved a recording, at the main screen, select Menu > Tools > Voice memo > Recordings list. 2. Scroll through the list to find your recording; then, select Options and one of the following: Playback Listen to the recording using the earpiece. Delete Erase the recording. Edit title Rename the recording. Add alarm Add an alarm to the recording.

Calculator

The calculator on your phone adds, subtracts, multiplies, divides, calculates the square and the square root, changes the sign of the number entered, and converts currency values. This calculator has a limited accuracy and is designed for simple calculations. 1. At the main screen, select Menu > Tools > Calculator. 2. Enter the first number in the calculation. Press # for a decimal point if necessary. Press * to cycle through the add (+), subtract (-), multiply (*), and divide (/) characters. Pause briefly to select the displayed character. 3. Enter the second number in your calculation. 4. Select Options (equals is highlighted). To perform a square or square root calculation, select Options > Square or Square root. Select Options > Change sign to change the sign of your result.

Currency converter

You can convert foreign currency to domestic or vice versa. 1. At the main screen, enter a currency amount to convert. 2. Select Options > To home or To foreign. To homeconverts foreign currency to domestic currency. To foreignconverts domestic currency to foreign currency. If you have not done so already, you are prompted to enter the exchange rate. 3. Enter the exchange rate (press # to insert a decimal), and select OK. You can also edit the exchange rate at any time. When you change base currency, you must enter the new rates because all previously set exchange rates are set to zero. 1. At the main screen, select Menu > Tools > Calculator > Options > Exchange rate > Foreign unit expressed in domestic units or Domestic unit expressed in foreign units. Foreign unit expressed in domestic unitsThe number of home units it takes to make one unit of foreign currency. Domestic unit expressed in foreign unitsThe number of foreign units it takes to make one unit of your home currency. 2. Enter the exchange rate, and select OK.

Desk Stand (DCV-14) Easy-to-use Handsfree (HF-3) Headrest Handsfree (BHF-3) Miscellaneous Data Cable (CA-42) Xpress-on Color Covers Carry Case See www.nokia.com/phones for more information about enhancements.

Purchasing accessories

13. Purchasing accessories
To purchase accessories for your new phone such as a hands-free headset, carrying case, or car power adapter, please visit www.virginmobileusa.com.

Battery information

14. Battery information
This section provides information about batteries, chargers, safety guidelines and technical information. Be aware that the information in this section is subject to change as batteries and chargers change.
Charging and discharging batteries
Your phone is powered by a rechargeable battery. The full performance of a new battery is achieved only after two or three complete charge and discharge cycles. The battery can be charged and discharged hundreds of times but it will eventually wear out. When the talk and standby times are noticeably shorter than normal, replace the battery. Use only Nokia approved batteries, and recharge your battery only with Nokia approved chargers designated for this phone. Unplug the charger from the electrical plug and the phone when not in use. Do not leave a fully charged battery connected to a charger, since overcharging may shorten its lifetime. If left unused, a fully charged battery will lose its charge over time. Use the battery only for its intended purpose. Never use any charger or battery that is damaged. Do not short-circuit the battery. Accidental short-circuiting can occur when a metallic object such as a coin, clip, or pen causes direct connection of the positive (+) and negative (-) terminals of the battery. (These look like metal strips on the battery.) This might happen, for example, when you carry a spare battery in your pocket or purse. Short-circuiting the terminals may damage the battery or the connecting object. Leaving the battery in hot or cold places, such as in a closed car in summer or winter conditions, will reduce the capacity and lifetime of the battery and its ability to charge. Always try to keep the battery between 59F and 77F (15C and 25C). A phone with a hot or cold battery may not work temporarily, even when the battery is fully charged. Battery performance is particularly limited in temperatures well below freezing. Do not dispose of batteries in a fire, as they may explode. Batteries may also explode if damaged. Dispose of batteries according to local regulations. Please recycle when possible. Do not dispose as household waste.

Radiofrequency energy (RF) from wireless phones can interact with some electronic devices. For this reason, FDA helped develop a detailed test method to measure electromagnetic interference (EMI) of implanted cardiac pacemakers and defibrillators from wireless telephones. This test method is now part of a standard sponsored by the Association for the Advancement of Medical instrumentation (AAMI). The final draft, a joint effort by FDA, medical device manufacturers, and many other groups, was completed in late 2000. This standard will allow manufacturers to ensure that cardiac pacemakers and defibrillators are safe from wireless phone EMI. FDA has tested hearing aids for interference from handheld wireless phones and helped develop a voluntary standard sponsored by the Institute of Electrical and Electronic Engineers (IEEE). This standard specifies test methods and performance requirements for hearing aids and wireless phones so that no interference occurs when a person uses a compatible phone and a accompanied hearing aid at the same time. This standard was approved by the IEEE in 2000.FDA continues to monitor the use of wireless phones for possible interactions with other medical devices. Should harmful interference be found to occur, FDA will conduct testing to assess the interference and work to resolve the problem.
12.Where can I find additional information?
For additional information, please refer to the following resources: FDA web page on wireless phones http://www.fda.gov/cdrh/phones/index.html Federal Communications Commission (FCC) RF Safety Program http://www.fcc.gov/oet/rfsafety International Commission on Non-Ionizing Radiation Protection http://www.icnirp.de World Health Organization (WHO) International EMF Project http://www.who.int/emf National Radiological Protection Board (UK) http://www.nrpb.org.uk/ July 18, 2001For updates: http://www.fda.gov/cdrh/phones
alarm clock 62 antenna 16 anykey answer 52 automate voicemail 44 automatic redial 52 auto-update 57 contacts list add 26 additions 28 delete 28 edit 32 search 26 settings 28 countdown timer 67 currency converter 67 customer care 9
back cover removing 16 replacing 17 banner 55 battery authentication 75 charging 17 charging times 76 removing 16 replacing 17 talk and standby times 76 battery information 74 business cards 34
dialing codes 45 display language 54 download ringtone 46
edit contact name 27 emergency calls 80 while using VirginXtras 47 with keypad locked 54 enhancement settings 58 enhancements 71 ESN 9 exchange rate 67 exit VirginXtras 47
calculator 66 calendar 63 Call settings 51 caller groups 31 setting up 31 calling cards 52 calls answering 20 in-call options 21 making 20 care and maintenance 77 certification information (SAR) 80 charger connecting 17 times 76 Check balance 35 contact information 27 contact name 27 contacts 26

FCC information 80 flashlight instructions 22

games 70

headset 18 help 9 help text 15, 55
incoming calls 48 indicators and icons 12
recent calls 48 restore factory settings 61 restrict calls 60 ringtone, download 46

Keyguard 21 automatic 54

safety 6 important safety information 78 save addresses and notes 27 numbers, text items, details 27 scrolling 14 security settings 59 set date 57 time 56 settings 50 call 51 shared memory 8 shortcuts 14 speakerphone 21 speed dial 28 speed dialing 52 split time 68 standby time 76 stopwatch 68
languages 54 lap time 68 location info sharing 51 lock code 59 change 60 loudspeaker 21
main screen 12 message folders 40 messages delete 42 text messages 36 voice messages 44 My Account 35 my banner 55 my phone no. 31

Network Services 8

talk and standby times 76 talk time 76 technical information 81 template 37 text entry 23 text message template 37 text messages 36 time and date settings 56 timed profiles 51 tone settings 51 tools 62 Top-Up the account 35 touch tones 54 set length 55 set type 54 turn phone off 18 turn phone on 18

outgoing calls 49

patent information 82 phone lock 59 numbers allowed 59 phone settings 54 predictive text 24 profiles 50

quick keys 12

view call times 49 incoming calls 48 missed calls 48 saved messages 41 Virgin Alerts 43 VirginXtras 46 exit 47 make an emergency call 47 sign on 46 voice commands 57 voice dialing 29 voice messages 44 voice navigation 57 voice tags 29 assign a tag 30 options 30 voicemail automate 44 voicemail set up 44 volume adjusting 21 using the speakerphone 21
warranty 9 welcome note 55

Xpress-on covers 18

doc1

Repairing Nokia 2115i Speaker

Tools used in this guide

Spudger (1) T6 Torx Screwdriver (1)
Parts relevant to this guide
Replacement Screen Speaker assembly (1)
The speaker and the screen are physically attached, so they must be replaced together.

2011 iFixit CC BY-NC-SA

www.iFixit.com

Page 1 of 6

Step 1 - Taking Out the Battery
Turn the phone completely off to prevent shock. To do this, press down on the power button located on the top of the phone until the phone shuts off. On the back of the phone, press down on the small gray button. Slide the back plate down and off.

Step 2

Take the battery out by inserting your thumb in the groove below the battery and pushing the battery up and out.

Page 2 of 6

Step 3 - Removing the Faceplate
Locate the spudger. The spudger is seen in the first picture on this step. Turn the front of the phone to face you. Find the two small square holes on the bottom left and right sides of the faceplate. Insert a spudger or nudging tool into each square hole and push up to detach face plate.

Step 4

Pull the face plate up and off of the phone. Note: The keypad will be loose and may fall off of the phone when removing the face plate.

Page 3 of 6

Step 5 - Removing the Keypad
To remove the keypad, simply lift it off the phone.
Step 6 - Removing the Motherboard
Locate the 6 screws on the metallic sheet that previously held the keypad. (This sheet, shown in the pictures, is the top side of the motherboard). Note: 2 of the screws are on the bottom corners, 2 are on the right and left edges of the phone below the screen, and 2 are on the very top corners of the phone, above the screen. Use a size T6 Torx screwdriver to remove each of these 6 screws.

Page 4 of 6

Step 7
To remove the motherboard from the phone, lift it up and off the phone. Note: The screen will still be attached to the motherboard.
Note: The front side of the motherboard next to the phone's remaining piece is seen in the third picture. Continue to the screen replacement guide for steps on how to remove the screen from the motherboard.
Step 8 - Replacing the Speaker
Turn the screen/motherboard so that the screen side is facing down. You can see this in the first picture of this step. With your fingers, push the black tabs on the upper left and upper right sides of the motherboard outward. You can see this in the second picture of this step. Once you push the tabs outward, you should be able to pull the screen off.

Page 5 of 6

Step 9
Turn the motherboard so that the screen faces upward. Holding the sides of the screen, pull the screen up and off of the motherboard. Note: When you remove the screen from the motherboard, resistance is normal.
To reassemble your device, follow these instructions in reverse order.
This document was last generated on Feb 12, 2011.

Page 6 of 6

 

Tags

TI 6533 SMU-WC3 RF-22192 MY411V LW15E23C GSP633 EW658F Xciting 250 TSS-5C 450WP WH Summit 200 Coolpix 4200 ACC-52 Vector BX2440X EVS3000 Remotesl25 EW6021 LM720 JBL L166 C-500 KX-TG7100CX IC-M302 RF-3700 TF-DVD7107 QW1100T RC1600E SRA-1200 Polar A3 T6-1 GF Guide Black VGN-FS550 KDL-46V5100 DVD-8621N Samsung T220 CDX-MP80 Combitrim 232D- KX-WP1050 Sxviper LDP-600 Scanner DJX-II XC-IS21MD Death D52W15 Olympus E300 Fantasy X DTB-S500F RC-990BX PDC 4055 Voicestation 100 SR-5001 5 0 Instruments Torq CA-1010 40333 SCX-4521FG-XAA HP-137R Charger 42WB03SW 3 2 YP-S2ZR RDR-GX255 Gigaset S680 VGC-RA51 P-661HW-D DCR-TRV40 DR7500 Digi002R GA16DE KDC-5027 SGH-U600 VF80EX Library Express Style DV3 Rally SRT2223S V-AMP PRO HBN5042AUC FL-36R Easypen M610 IP4500 Designer 2 2488NEO Coolpix S3 TDA-7552R 575N-CB575bn- M7NCG 400 KX-TG2237 555ELD AL1711 RDR-GX310 KDL-40EX700 LTV-37W2 HD Sono 88 BIT 99 CL5000

 

manuel d'instructions, Guide de l'utilisateur | Manual de instrucciones, Instrucciones de uso | Bedienungsanleitung, Bedienungsanleitung | Manual de Instruções, guia do usuário | инструкция | návod na použitie, Užívateľská príručka, návod k použití | bruksanvisningen | instrukcja, podręcznik użytkownika | kullanım kılavuzu, Kullanım | kézikönyv, használati útmutató | manuale di istruzioni, istruzioni d'uso | handleiding, gebruikershandleiding

 

Sitemap

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101