PRINTING IMAGES

To configure print settings for a single image To configure print settings for all images Date Printing 189

Using World Time... 167

DPOF.. 182
Editing the Date and Time of an Image. 168 Changing the Display Language.. 169 Changing the Brightness of the Monitor Screen.. 170 Changing the USB Port Protocol.. 171 Configuring [ ] (REC) and ] (PLAY) Power On/Off Functions. 172 [ Formatting Built-in Memory.. 173
Using PictBridge or USB DIRECT-PRINT.. 186 PRINT Image Matching III.. 191 Exif Print.. 191
VIEWING IMAGES ON A COMPUTER

APPENDIX

Using the Camera with a Windows Computer. 192 Using the Camera with a Macintosh Computer. 199 Using a Memory Card to Transfer Images to a Computer... 203 Memory Data.. 204
DCF Protocol Memory Folder Structure Image Files Supported by the Camera 206
Menu Reference.. 227 Indicator Lamp Reference.. 230 Troubleshooting Guide.. 233
If you have problems installing the USB driver. Display Messages 238 239

Specifications... 241

USING THE CAMERA WITH A COMPUTER
Selecting the Software You Need Computer System Requirements Managing Images on a PC Retouching, Reorienting, and Printing a Snapshot Playing a Movie Transferring Images to the Camera Viewing User Documentation (PDF Files) User Registration Exiting the Menu Application Selecting the Software You Need Computer System Requirements Managing Images on a Macintosh Playing a Movie Viewing User Documentation (PDF Files) To register as a camera user 226
Using the Camera with a Windows Computer. 208
Using the Camera with a Macintosh Computer. 222
INTRODUCTION IMPORTANT! The contents of this manual are subject to change without notice. CASIO COMPUTER CO., LTD. assumes no responsibility for any damage or loss resulting from the use of this manual. CASIO COMPUTER CO., LTD. assumes no responsibility for any loss or claims by third parties which may arise due to the use or malfunction of the EX-Z700. CASIO COMPUTER CO., LTD. shall not be held liable for any damages or losses suffered by you or any third party due to the use of Photo Loader, Photohands and/or Photo Transport. CASIO COMPUTER CO., LTD. assumes no responsibility for any damage or loss caused by deletion of data as a result of malfunction, repairs, or battery replacement. Be sure to back up all important data on other media to protect against its loss. Note that the example screens and product illustrations shown in this Users Guide may differ somewhat by the screens and configuration of the actual camera. SDHC Logo is a trademark. Windows, Internet Explorer, Windows Media, and DirectX are registered trademarks of Microsoft Corporation.

It takes about 180 minutes to achieve a full charge.
First, charge the battery!
1. Load the battery into the camera

(page 32). 1

USB cradle

Stopper AC adaptor

AC power cord
[CHARGE] lamp Charging: Lights red Charging Complete: Lights green
To configure display language and clock settings
Be sure to configure the following settings before using the camera to record images. See page 47 for details. If you make a mistake when setting the language or clock with the following procedure, you will need to use the cameras menu to individually change the language (page 169) or clock (page 165) settings.
1. Press the power button to turn on the camera. 2. Use [], [], [], and [] to select the language you
3. Press [SET] to register the language setting. 4. Use [], [], [], and [] to select the geographical
area you want, and then press [SET].
5. Use [] and [] to select the city you want, and then

press [SET].

6. Use [] and [] to select the summer time (DST)
setting you want, and then press [SET].

2, 3, 4, 5, 6, 7, 8, 9

7. Use [] and [] to select the date format setting you
want, and then press [SET].

[] [] []

8. Set the date and the time.

[] [SET]

9. Press [SET] to register the clock settings and exit the

setting screen.

To record an image

See page 51 for details.

Auto recording icon

1. Press [

] (REC).
This enters the REC (recording) mode.
2. Point the camera at the subject, use the monitor
screen to compose the image, and then press the shutter button half way.
When the camera finishes its Auto Focus operation, the focus frame will turn green and the operation lamp lights green.

06/06 12/24 12:38

Focus frame
3. Holding the camera still, gently press the
shutter button all the way down.

Operation lamp

The cameras built in memory can record only a few images and is intended for testing the camera or for emergency purposes only. Using a memory card provides more capacity you can use to store more images, high-quality and large-size images, and longer movies. In order to be able to use a commercially available memory card, you first need to format it using the cameras formatting procedure. For details about formatting a memory card, see page 177.

To view a recorded image

See page 126 for details.

To delete an image

See page 154 for details.

2, 3, 4, 5

] (PLAY).

] (PLAY). ).

This enters the PLAY (playback) mode.

2. Press [] (

delete.
2. Use [] and [] to scroll through the

images.

3. Use [] and [] to display the image you want to 4. Use [] and [] to select Delete.

1. Press the power button, [
] (REC) or ] (PLAY) to turn on the camera.
2. Use [], [], [], and [] to select the
language you want, and then press [SET].

3. Use [], [], [], and

[] to select the geographical area where you live, and then press [SET].
select the name of the city where you live, and then press [SET].

6. Use [] and [] to

select the date format setting you want, and then press [SET].
5. Use [] and [] to select the summer time
(DST) setting you want, and then press [SET].
When you want to do this: Keep time using summer time (Daylight Saving Time) Keep time using standard time Select this setting: On Off
Example: December 24, 2006
To display the date like this: 06/12/24 24/12/06 12/24/06 Select this format: YY/MM/DD DD/MM/YY MM/DD/YY

7. Set the current date

and the time.
To do this: Change the setting at the current cursor location Move the cursor between settings Toggle between 12-hour and 24hour timekeeping
Do this: Press [] and []. Press [] and []. Press [BS].
8. Press [SET] to register the settings and exit

the setting screen.

IMPORTANT! Make sure your fingers and the strap do not block the flash, microphone, AF assist light/self-timer lamp or lens.

Flash Microphone

This section describes the basic procedure for recording an image.

Recording an Image

Aiming the Camera
Use both hands to hold the camera still when shooting an image. Holding the camera with one hand increases the chance of movement, which can blur your images. Horizontal Hold the camera still in both hands, with your arms firmly against your sides.
AF assist light/ self-timer lamp

Vertical

When holding the camera vertically, make sure that the flash is above the lens. Hold the camera still with both hands.
BASIC IMAGE RECORDING There is a speaker on the bottom of the camera. The operation sound and other sounds can become difficult to hear if you cover the speaker with your hand while holding it.
Your camera automatically adjusts shutter speed in accordance with the brightness of the subject. Images you record are stored in the cameras built-in memory, or to a memory card if you have one loaded in the camera. When an optionally available SD memory card, SDHC memory card or MultiMediaCard (MMC) is loaded in the camera, images are stored on the card (page 174). The cameras built in memory can record only a few images and is intended for testing the camera or for emergency purposes only. Using a memory card provides more capacity you can use to store more images, high-quality and large-size images, and longer movies. In order to be able to use a commercially available memory card, you first need to format it using the cameras formatting procedure. For details about formatting a memory card, see page 177.

I Flash On

Select (Flash On) as the flash mode when backlighting causes your subject to appear dark, even though there is enough light to keep the flash from firing automatically. This will cause the flash to fire and illuminate your subject whenever you press the shutter button (daylight synchro flash).

I Soft Flash

Select (Soft Flash) as the flash mode to suppress flash intensity and shoot with a soft feel.
I About Red-eye Reduction
Using the flash to record at night or in a dimly lit room can cause red spots inside the eyes of people who are in the image. This happens because the light from the flash reflects off of the retina of the eye.
BASIC IMAGE RECORDING IMPORTANT! Note the following important points when using redeye reduction. Red-eye reduction does not work unless the people in the image are looking directly at the camera during the pre-flash. Before pressing the shutter button, call out to the subjects so they all look at the camera while the pre-flash operation is performed. Red-eye reduction may not work very well if the subjects are located far away from the camera.

Flash Unit Status

You can find out the current flash unit status by pressing the shutter button half way and checking the monitor screen and operation lamp.

Operation lamp*

The indicator is also shown on the monitor screen when the flash unit is ready to fire.

* Operation lamp

When the operation lamp is this: Flashing amber Lit or flashing green *1 It means this: Flash unit is charging Flash unit is ready to fire
*1 Flashes green when the image is not focused while using the Auto Focus mode or Macro mode.
Changing the Flash Intensity Setting
Perform the following steps to change the flash intensity setting.

Using Flash Assist

Recording a subject that is outside the flash range can cause the subject to appear dark in the resulting image, because not enough of the flash reaches the subject. When this happens, you can use flash assist to correct the brightness of the recorded subject, so it appears as if the flash illumination was sufficient.
1. In the REC mode, press [MENU]. 2. Use [] and [] to select the Quality tab. 3. Use [] and [] to select Flash Intensity,
To make flash intensity: Stronger Normal Weaker Select this setting: +2 +1 2

Flash assist used

Flash assist not used
1. In the REC mode, press [MENU]. 2. Use [] and [] to select the Quality tab. 3. Use [] and [] to select Flash Assist, and

then press [SET].

Macro, and
4. Press the shutter button to record the image.
The focus and image recording operations are identical to those in the Auto Focus mode.
OTHER RECORDING FUNCTIONS NOTE When the Macro mode cannot focus properly because the subject is too far away, the camera automatically switches to the Auto Focus range (page 75). Whenever you perform an optical zoom operation (page 58) while recording with the Macro mode, a value will appear on the monitor screen as shown below to tell you the focusing range. Example: cm - cm

Using Pan Focus

Pan Focus comes in handy when recording under conditions where Auto Focus is difficult for some reason, or in cases where Auto Focus operation noise is too noticeable in the movie audio.
IMPORTANT! Use of the flash along with the Macro mode can cause the light of the flash to become blocked, which can produce unwanted lens shadows in your image. During movie recording, Macro mode uses fixed focus that is optimized for macro recording.
NOTE If you press the shutter button half way, the focus distance will appear on the monitor screen. Example: m - m

Using the Infinity Mode

The Infinity mode fixes focus at infinity (). Use this mode when recording scenery and other faraway images.

Using Manual Focus

With the Manual Focus mode, you can adjust the focus of an image manually. The following shows focus range in the Manual Focus mode.
Optical Zoom Factor 1X 3X Approximate Focus Range 15cm (5.9) to infinity () 40cm (15.7) to infinity ()
Using optical zoom causes the above range to change.

3. Use [] and [] to

select , and then press [SET].
At this point, a boundary also appears on the display, indicating the part of the image that will be used for manual focus.

Boundary

4. Press [SET]. 5. While watching the
image on the monitor screen, use [] and [] to focus.
NOTE Whenever you perform an optical zoom operation (page 58) while recording with manual focus, a value will appear on the monitor screen as shown below to tell you the focusing range. Example: MF cm -

Manual focus position

To do this: Focus in on the subject Focus out on the subject Do this: Press []. Press [].
Pressing [] or [] causes the area inside of the boundary displayed in step 1 to fill the monitor screen momentarily to aid in focus. The normal image will reappear a short while later. If you do not adjust the focus of the enlarged image, it will return automatically to step 3. If this happens and you still want to adjust the focus, press [SET] to display the enlarged image again.

then press []. Quality , and
Setting Higher Quality HQ (pixels) Normal (pixels) Lower Quality LP (pixels) Approximate Data Rate 10.2 megabits per second 6.1 megabits per second 2.45 megabits per second Frame Rate 30 frames/ second 30 frames/ second 15 frames/ second
1. In the REC mode, press [BS] (BEST SHOT). 2. Use [] and [] to select the
scene, and then press [SET].
Selecting the (movie) scene causes appear on the monitor screen. to

(movie)

3. Point the camera at
the subject and then press the shutter button.
This starts movie recording. This starts movie recording, which is indicated by REC on the monitor screen.

Remaining recording time

Recording time
OTHER RECORDING FUNCTIONS Movie recording continues as long as remaining memory capacity allows. Pan Focus (page 79) is selected automatically as the focus mode in the Movie Mode regardless of the Mode Memory Focus setting (page 118) and the snapshot focus mode setting. You can switch to another focus mode before you start recording, but remember that you cannot select the Auto Focus mode for movie recording.
I Movie Recording Precautions
This camera also records audio. Note the following points when recording a movie. Take care that you do not block the microphone ON/OFF with your fingers. Good recording results are not possible when the camera is too far from the subject. Microphone Operating camera buttons during recording can cause button noise to be included in the audio. Movie audio is recorded in monaural. Very bright light inside of an image can cause a vertical band to appear in the monitor screen image. This is a CCD phenomenon known as vertical smear, and does not indicate malfunction of the camera. Note that vertical smear is not recorded with the image in the case of a snapshot, but it is recorded in the case of a movie.
4. To stop movie recording, press the shutter

button again.

When movie recording is complete, the movie file is stored in file memory.
OTHER RECORDING FUNCTIONS The movie recording capacity of built-in memory is very small. Use of a memory card (page 174) is recommended when recording movies. Certain types of memory cards take longer to record data, which can cause movie frames to be dropped. and REC flash on the monitor screen during recording to let you know when a frame has been dropped. Use of a memory card with a maximum transfer speed of at least 10MB per second is recommended. Optical zoom is disabled during movie recording. Digital zoom only is available. Make sure you select the optical zoom setting you want to use before you press the shutter button to start movie recording (page 58). The effects of camera movement in an image become more pronounced when you record close ups or recording with a large zoom factor. Because of this, use of a tripod is recommended when recording close ups or recording with a large zoom factor. Images may be out of focus if the subject is outside the shooting range of the camera. Macro uses fixed focus that is optimized for macro recording.

OTHER RECORDING FUNCTIONS IMPORTANT! When Multi is selected as the metering mode, certain procedures cause the metering mode setting to change automatically as described below. Changing the exposure compensation setting (page 83) to a value other than 0.0 changes the metering mode setting to Center Weighted. The metering mode changes back to Multi when you return the exposure compensation setting to 0.0. When Multi is selected, the icon is not displayed when you return to the REC mode information display (page 26).
Using the Filter Function
The cameras filter function lets you alter the tint of an image when you record it.
1. In the REC mode, press [MENU]. 2. Select the Quality tab, select Filter, and
Available filter settings are: Off, B/W, Sepia, Red, Green, Blue, Yellow, Pink, Purple IMPORTANT! Using the cameras filter feature produces the same effect as attaching a color filter to the lens.
Specifying Outline Sharpness
Use the following procedure to control the sharpness of image outlines.
Specifying Color Saturation
Use the following procedure to control the intensity of the image you are recording.
1. In the REC mode, press [MENU]. 2. Select the Quality tab, select Sharpness,
1. In the REC mode, press [MENU]. 2. Select the Quality tab, select Saturation,
To get this: High sharpness Normal sharpness Low sharpness Select this setting: +2 +1 2
To get this: High color saturation (intensity) Normal color saturation (intensity) Low color saturation (intensity) Select this setting: +2 +1 2

Specifying Contrast

Use this procedure to adjust the relative difference between the light areas and dark areas of the image you are recording.

Date Stamping Snapshots

You can have the snapshots recording date only, or date and time stamped in the lower right corner of the image.
1. In the REC mode, press [MENU]. 2. Select the Quality tab, select Contrast,
1. In the REC mode, press [MENU]. 2. Select the Set Up tab, select Timestamp,
To get this: High contrast Normal contrast Low contrast Select this setting: +2 +1 2
Example: December 24, 2006, 1:25 p.m.
To include this date stamp information: Recording date (2006/12/24) Recording date and time (2006/12/24 1:25pm) Nothing Select this setting: Date Date&Time Off
Turning on time stamping causes the applicable timestamp icon to appear on the monitor screen (page 26). : Date : Date&Time
OTHER RECORDING FUNCTIONS IMPORTANT! Once date and time information is stamped in a print, it cannot be edited or deleted. Use the Date Style setting (page 166) to specify the format of the date. The recording date and time are determined in accordance with the cameras clock settings (pages 47, 165) when the snapshot is recorded. Digital zoom is not supported while date stamping (Date or Date&Time) is turned on (page 60). Date stamping is not supported for the following types of images. Images recorded with certain BEST SHOT scenes (Business Cards and Documents, Whiteboard, etc., Old Photo, Auto Framing)

Folders

Your camera automatically creates folders in its built-in memory or on the memory card.

CIMG0026.JPG

Extension Serial number (4 digits)

Memory Folders and Files

An image you record is automatically stored in a folder, whose name is a serial number. You can have up to 900 folders in memory at the same time. Folder names are generated as shown below. Example: Name of the 100th folder.

100CASIO

Serial number (3 digits)
The folder and file names described here appear when you view folders and files on a computer. See page 28 for information about how the camera displays folder and file names. The actual number of files you will be able to store on a memory card depends on image size and quality, card capacity, etc. For details about the folder structure, see Memory Folder Structure on page 205.

Protecting Files

Once you protect a file it cannot be deleted (page 154). You can protect files individually or you can protect all files in memory with a single operation. IMPORTANT! Even if a file is protected, it still will be deleted by a memory card format operation (page 177) or a builtin memory format operation (page 173).
select On, and then press [SET].
A file that is protected is indicated by the mark. To unprotect a file, select Off in step 4, and then press [SET].

To protect a single file

1. In the PLAY mode, press [MENU]. 2. Select the PLAY tab,
select Protect, and then press [].
3. Use [] and [] to scroll through files and
display the one you want to protect.
To protect all files in memory
Using the FAVORITE Folder
You can copy photos of family members or other special shots from the file storage folder (page 205) to the FAVORITE folder in built-in memory. Images copied to the FAVORITE folder are automatically reduced to pixels. Images in the FAVORITE folder are not displayed during normal playback, so it helps to keep your personal images private as you carry them around. FAVORITE folder images are not deleted when you change memory cards, so you can always keep them on hand.
1. In the PLAY mode, press [MENU]. 2. Select the PLAY tab, select Protect, and
3. Use [] and [] to select All Files : On, and
To unprotect all files, press [SET] in step 3 so the setting shows All Files : Off.
4. Press [MENU] to exit the menu screen.
To copy a file to the FAVORITE folder
select Favorites, and then press [].
select Save, and then press [SET].
This displays the names of the files in built-in memory or on the loaded memory card.
NOTE Copying an image file with the above procedure creates a 320 240-pixel QVGA-size image in the FAVORITE folder. A file copied into the FAVORITE folder is automatically assigned a file name that is a serial number. Though the serial number starts from 0001 and can go as high as 9999, the actual upper end of the range depends on built-in memory capacity. Remember that the maximum number of images that can be stored in built-in memory depends on the size of each image and other factors. IMPORTANT! Note that an image that has been copied to the FAVORITE folder and then resized cannot be returned to its original size. Files in the FAVORITE folder cannot be copied to a memory card.

When connecting to this type of device: Computer or USB DIRECTPRINT-compatible printer PictBridge-compatible printer Select this setting: Mass Storage (USB DIRECT-PRINT) PTP (PictBridge)
4. Connect the USB cable that comes bundled
with the camera to the USB cradle and a printer.
USB port USB cable (bundled) Connector B
5. Turn off the camera, and then set the camera

on the USB cradle.

6. Turn on the printer. 7. Load paper for printing the images into the

printer.

Connector A

8. Press the USB

cradles [USB] button.
This displays the print menu on the cameras monitor screen.

](USB port)

Also, connect the AC adaptor to the USB cradle and plug the AC adaptor into an electrical outlet. If you are using battery power without the AC adaptor, make sure that the battery is fully charged. Nothing appears on the cameras monitor screen if the camera is on the USB cradle while the bundled AV cable is connected to the cradle. Be sure to disconnect the AV cable from the cradle if you want to use the cameras monitor screen to view images.
9. Use [] and [] to select Paper Size, and

11. Use [] and [] to

specify the print option you want.
To print a single image: Select 1 Image and then press [SET]. Next, use [] and [] to select the image you want to print. To print multiple images or all images: Select DPOF Printing, and then press [SET]. Selecting this option will print the images selected with the DPOF settings. See page 182 for more information. You can toggle date stamping of the image on and off by pressing [BS]. The date stamp will be printed when On is indicated on the monitor screen. On indicates that date stamping is turned on.
10. Use [] and [] to select the paper size you
want to use for printing, and then press [SET].
The following are the print sizes that are available. 3.A4 8.By Printer Selecting By Printer prints using the paper size selected on the printer. Available paper size settings depend on the connected printer. For full details, see the instructions that come with your printer.

Managing Images on a PC

To manage images on a PC, you need to install the Photo Loader application from the CD-ROM that comes with the camera. Photo Loader lets you import images from the camera to your computer automatically, to arrange images by recording date, and to display images in a calendar format. Use the CD-ROM whose contents label shows Photo Loader. NOTE If you already have Photo Loader installed on your computer, check its version. If the bundled version is newer than the one you have, uninstall the old version of Photo Loader and then install the newer version. The CD-ROM includes the software and user documentation for various languages. Check the CD-ROM menu screen to see if applications and user documentation are available for a particular language.

I Getting Started

Start up your computer and insert the CD-ROM into its CDROM drive. This will automatically launch the menu application, which displays a menu screen on your computer. The menu application may not start up automatically on some computers. If this happens, navigate to the CDROM and double-click menu.exe to launch the menu application.

I Selecting a Language

First select a language. Note that some software is not available in all languages.
1. On the menu screen, click the tab for the

language you want.

I Viewing the Contents of the Read me File
You should always read the Read me file for Photo Loader before installing it. The Read me file contains information you need to know when installing the application.
I Installing Photo Loader
1. Click the Install button for Photo Loader. 2. Follow the instructions that appear on your

computer screen.

Windows 98SE/98 If the Jet40SP8_9xNT.exe and MDAC (Microsoft Data Access Components) 2.8 installation dialog box appears after installation of Photo Loader is complete, follow the instructions on the screen to perform the installation. The installation dialog box will not appear if Jet40SP8_9xNT.exe and MDAC2.8 or higher are already installed on your computer. Windows XP (including SP1), 2000, or Me (Excluding Windows XP SP2) If the MDAC (Microsoft Data Access Components) 2.8 installation dialog box appears after installation of Photo Loader is complete, follow the instructions on the screen to perform the installation. The installation dialog box will not appear if MDAC2.8 or higher installed is already installed on your computer.

1. Click the Install button for Photo
1. Drop the image data you want to transfer to
the camera onto the Photo Transport Transfer button.
Move your mouse pointer to the image file you want to transfer, and then hold down your mouse button. Keeping your mouse button depressed, drag the mouse pointer and the image file along with it to the Photo Transport Transfer button, and then release the mouse button.

Help button

2. Follow the instructions that appear on your

I Using Photo Transport

To start up Photo Transport
1. First, establish a connection between the
camera and computer (page 192).

Settings button

Exit button
2. On the Windows Start menu, click [All
Programs], and then point to [CASIO] and then [Photo Transport].
3. Click [Photo Transport] to start up.

Transfer button

2. Follow the instructions that appear on the
display to transfer the image file to the camera.
The image transfer method and detailed image settings used depend on the Photo Transport settings. For details, see Photo Transport help (page 220). To transfer screen captures to the camera
2. Use your mouse to select the area of the
screen you want to capture.
Move your mouse pointer to the upper left corner of the area you want to capture and then hold down your mouse button. Keeping your mouse button depressed, drag the pointer down to the right corner of the area and then release the mouse button.
1. Click the Photo Transport Capture button.

Capture button

Capture area
3. Follow the instructions that appear on the
display to transfer a capture of the selected area to the camera.
The image transfer method and detailed image settings used depend on the Photo Transport settings. For details, see Photo Transport help.
Viewing User Documentation (PDF Files)
1. In the Manual area, click the name of the

manual you want to read.

IMPORTANT! You must have Adobe Reader or Adobe Acrobat Reader installed on your computer in order to view the contents of a PDF file. If you do not already have Adobe Reader installed, you can install it from the bundled CD-ROM.

Display Messages

Battery is low. Cannot correct image! The battery is dead. Keystone correction cannot be performed for some reason. The image will be stored as-is, without correction (pages 97, 99). Check connections! You are attempting to connect the camera to a printer while the cameras USB settings are not compatible with the USB system of the printer (page 171). You are attempting to connect to a computer that does not have a USB driver installed (page 192). The battery is dead, so the recorded image could not be saved.
Can not find the file. The camera cannot find a image specified by the slideshow Images setting. Specify another image (page 144). Cannot register any more files. You are attempting to save a BEST SHOT scene when there are already 999 scenes in the SCENE folder (page 93). You are attempting to copy a FAVORITE file when the FAVORITE folder already contains 9999 files (page 158). Some problem occurred with the memory card. Turn off the camera, and remove and then reinsert the memory card. If the same message appears, format the memory card (page 177). IMPORTANT! Formatting the memory card deletes all files on the memory card. Before formatting, try transferring recoverable files to a computer or some other storage device.
File could not be saved because battery is low. Folder cannot be created.
This message appears when you try to record an image while there are 9,999 files stored in the 999th folder. If you want to record more files, delete files you no longer need (page 154). This message appears and the camera turns off whenever lens performs some unexpected operation. If the same message appears after you turn power back on, contact your retailer or a CASIO service center. The camera is in the Printer mode, and the printer is out of paper. Memory is full. If you want to record more files, delete files you no longer need (page 154). There is no FAVORITE file.

LENS ERROR Card ERROR

Load paper!

Memory Full

No Favorites file!
Printing Error One of the following problems occurred during printing. Printer power off Printer internal error Image compression could not be performed during image data storage for some reason. Record the image again. The camera is in the Printer mode, and the printer is running low on ink or is out of ink. If the lens comes into contact with some obstacle, this message appears and the camera turns off. Take action to remove the obstacle, and try turning on power again. Your camera system is corrupted. Contact your retailer or a CASIO service center. The LOCK switch of the SD memory card or SDHC memory card is locked. You cannot store images to or delete images from a memory card that is locked. There are no files in built-in memory or on the memory card. This message will appear if you rename the files or folders in camera memory or if you move them to different locations. If this happens, move the files or folders back to their original locations in camera memory and return them to their original preset names (pages 205, 207). There are no printing There are no DPOF settings specifying images images. and the number of copies of each for printing. Set up DPOF. Configure the required DPOF settings (page 182). There is no image to The image or movie whose setup you are trying to register. save is not supported by BEST SHOT. This card is not formatted. This file cannot be played. The memory card loaded in the camera is not formatted. Format the memory card (page 177). The image file or audio file is corrupted, or is a type that cannot be displayed by this camera.

Nom de la housse

Rfrence

Appareils Compatibles

Dimensions Maximales

Name of the case

Compatible with

Maximum dimensions
Casio Exilim EX- Z110 Nikon S700 Canon Ixus 750 - 800is 54001 Casio Exilim EX- Z10 Casio Exilim EX- Z120 Canon Digital Ixus II's Canon Digital Ixus 60 Canon Ixus 60 - 75 Canon Powershot A Serie Canon Digital Ixus 75 Canon Digital Ixus 70 Canon Powershort A610 Canon Digital Ixus 850is Canon Ixus 850is - 900ti 54004 Nikon Coolpix S510 Canon Digital Ixus 95is Canon Powershot SD 1100 Is Canon Ixus 860is - 960ti 54005 Canon Digital Ixus 990is Canon Digital Ixus 860is Casio Exilim EX-S10 Casio Exilim EX-S600 Casio Exilim EX-S880 Casio Exilim EX-Z8 Casio Exilim EX-Z50 Casio Exilim S et Z Srie 54501 Casio Exilim EX-Z60 Casio Exilim EX-Z100 Casio Exilim EX-Z200 Casio Exilim EX-Z500 Casio Exilim EX-Z750 Casio Exilim EX-Z1200 Fuji FinePix Z1 Fuji FinePix A600 Fuji FinePix F10 Zoom Fujifilm FinePix F - A - Z 54201 Fuji FinePix F11 Zoom Fuji FinePix F20 Zoom Fuji FinePix F30 Zoom Fuji FinePix F31D HP Photosmart R817 HP Photosmart R927 Samsung S1030 Panasonic Lumix DMC-FX520 HP Photosmart 50201 Panasonic Lumix DMC-FX33 Samsung NV24HD
Canon Digital Ixus 40 Canon Digital Ixus 500 Canon Digital Ixus 430 Canon Digital Ixus 750 Canon Digital Ixus 65 Canon Digital Ixus 85is Canon Digital Ixus 100is Canon Powershot S80 Canon Digital Ixus 900ti Sony Cybershot DSC-W55 Canon Digital Ixus 80is Sony Cybershot DSC-W55 Canon Digital Ixus 960ti Casio Exilim EX-S100 Casio Exilim EX-S660D Casio Exilim EX-Z5 Casio Exilim EX-Z9 Casio Exilim EX-Z30 Casio Exilim EX-Z55 Casio Exilim EX-Z70 Casio Exilim EX-Z850 Casio Exilim EX-Z600 Casio Exilim EX-Z1050 Fuji FinePix Z4 Fuji FinePix A400 Zoom Sony Cybershot DSC-W200 Fuji FinePix A470 Zoom Fuji FinePix Z5FD Fuji FinePix A350 Zoom HP Photosmart R818 HP Photosmart R727 HP Photosmart E327 HP Photosmart R417 HP Photosmart R717 Samsung NV30
Canon Digital Ixus 50 Canon Digital Ixus 700 Canon Digital Ixus 30 Canon Digital Ixus 800is Canon Digital Ixus x 59 x 23 mm Canon Powershort A710 Canon Digital Ixus 90is Sony Cybershot DSC-WXx 60 x 26 mm 104 x 66 x 50 mm 90 x 60 x 30 mm
Canon Digital Ixus 970is Casio Exilim EX-S500 Casio Exilim EX-S770D Casio Exilim EX-Z7 Casio Exilim EX-Z11 Casio Exilim EX-Z40 Casio Exilim EX-Z57 Casio Exilim EX-Z80 Casio Exilim EX-Z1000 Casio Exilim EX-Z700 Casio Exilim EX-Z1080 Fuji FinePix Z3 Fuji FinePix A500 Zoom Sony Cybershot DSC-W300 Fuji FinePix A350 Zoom Fuji FinePix Z2 Fuji FinePix A345 Zoom HP Photosmart M527 HP Photosmart R725 HP Photosmart M525 HP Photosmart E317 HP Photosmart M425 Samsung NV40

100 x 60 x 30 mm

96 x 61 x 25 mm

95 x 62 x 35 mm

100 x 65 x 35 mm
Samsung NV15 Panasonic Lumix DMC-FX500 Panasonic Lumix DMC-FX150 Kodak Easyshare V530 Kodak Easyshare V et Pentax Optio W Sries Kodak Easyshare VKodak EasyShare V1233 Kodak EasyShare V1253 Pentax Pentax Optio Wpi Kodak Easyshare C530 Kodak Easyshare C Sries 54602 Kodak Easyshare C875 Kodak Easyshare C533 Kodak EasyShare V1273 Nikon Coolpix S9 Nikon Coolpix 5600 Nikon Coolpix L2 Nikon Coolpix L4 Nikon Coolpix L12 Nikon S - P - L Sries 53801 Nikon Coolpix P4 Nikon Coolpix S3 Nikon Coolpix S7c Nikon Coolpix S600 Nikon Coolpix S710 Nikon Coolpix S550 Nikon S50 Sries 53802 Sony T900 Nikon Coolpix S640 Nikon Coolpix S51C Olympus Mj 1000 Digital Olympus Mj 53901 Olympus Mj 725 Digital Olympus Mj 800 Panasonic Lumix DMC-FX01 Panasonic Lumix DMC-FS2 Panasonic Lumix DMC-FS20 Panasonic FX et FS Sries 51901 Panasonic Lumix DMC-FX07 Panasonic Lumix DMC-FX3 Panasonic Lumix DMC-FX30 Panasonic Lumix DMC-FS6 Panasonic LX Sries 51902 Panasonic Lumix DMC-FT1 Panasonic Lumix DMC-LX1 Panasonic Lumix DMC-TZ2 Panasonic Lumix DMC-TZ3 Panasonic TZ et LZ Sries 51903 Panasonic Lumix DMC-TZ4 Panasonic Lumix DMC-LX2 Panasonic Lumix DMC-TZ6 Panasonic Lumix DMC-TZ5
Samsung NV8 Panasonic Lumix DMC-FX50 Canon Digital Ixus 980is Kodak Easyshare V550 Kodak Easyshare V603 Kodak EasyShare V803 Pentax Pentax Optio W30 Pentax Pentax Optio W20 Kodak Easyshare C310 Kodak Easyshare C743 Kodak Easyshare C643 Nikon Coolpix 5200 Nikon Coolpix 7600 Nikon Coolpix 7900 Nikon Coolpix L7 Nikon Coolpix P1 Nikon Coolpix S1 Nikon Coolpix S4 Nikon Coolpix S6 Nikon Coolpix S510 Nikon Coolpix S700 Nikon Coolpix S710 Nikon Coolpix S70 Nikon Coolpix S550 Nikon Coolpix S52 Olympus Mj 750 Olympus Mj 730 Olympus Mj 720SW Panasonic Lumix DMC-FX10 Panasonic Lumix DMC-FS25 Panasonic Lumix DMC-FS3 Panasonic Lumix DMC-FX100 Panasonic Lumix DMC-FX37 Panasonic Lumix DMC-FX9 Panasonic Lumix DMC-FS7 Panasonic Lumix DMC-FT3 Samsung S1050 Panasonic Lumix DMC-LZ1 Panasonic Lumix DMC-LZ2 Panasonic Lumix DMC-LZ3 Panasonic Lumix DMC-TZ50 Panasonic Lumix DMC-TZ55 Panasonic Lumix DMC-TZ20

Pentax Optio A40 Pentax Optio M40 Pentax Optio M20 Pentax Optio S7 Pentax Optio Svi Pentax Optio S55 Pentax Optio S55 Samsung Digimax V800 Samsung Digimax A503 Samsung NV 10 Samsung i8 Samsung TL34HD Samsung ST500 Samsung NV 100 HD Samsung NV 5 Sony Cybershot DSC-W120 Olympus Mj 1030SW Sony Cybershot DSC-T100 Sony Cybershot DSC-T33 Sony Cybershot DSC-T700 Sony Cybershot DSC-W50 Sony Cybershot DSC-W70 Sony Cybershot DSC-W80 Sony Cybershot DSC-W85 Sony DSC-TX10 Sony Cybershot DSC-T900 Nikon Coolpix S200 Nikon P6000 Canon Powershot G7 Canon Digital Ixus 120 is Canon Digital Ixus 970is Nikon Coolpix S50c Nikon Coolpix S630 Nikon S70 Panasonic Lumix DMC-FX50 Samsung TL34HD Sony Cybershot DSC-W300 Samsung IT100 Samsung TLx 60 x 30 mm Nikon P7000 Olympus X-Z1 Canon Powershot S95 Sony Cybershot DSC-TX9 Canon K/Ixus 1000 HS 115 x 80 x 60 mm 95 x 57 x 24 mm 95 x 56,5 x 23,3 mm 100 x 65 x 30 mm Samsung EX1 Sony DSC-HX5V Sony DSC-HX7V Sony DSC-TXx 57 x 31 mm 95 x 65 x 35 mm

Samsung L et I Sries

100 x 62 x 25 mm

Samsung NV Sries

110 x 60 x 65 mm
Copyright 2005-2011 Innovacases / Norve Saint-Tropez - All other products and brand names may be trademarks of their respective owners