CAUTION

CAUTION indicates a potentially hazardous situation which, if not avoided, may result in a minor or moderate injury. Leaking, overheating, or burst battery could result in fire or injury. Use battery with the correct specification for the camera. Do not short circuit, heat or dispose of battery in a fire. Do not insert the battery with the polarities reversed. Remove the battery when not planning to use the camera for a long period of time. Battery may leak corrosive electrolyte and permanently damage the cameras components. Do not fire the flash while it is in contact with hands or objects. Do not touch the flash after using it continuously. It may cause burns. If you are using the AC Charger to drive the camera, do not move the camera while it is switched on. After use, always switch off the camera before unplugging the cable from the wall socket. Then make sure that any connector cords or cables to other devices are disconnected before moving the camera. Failure to do so may damage the cords or cables and cause a fire or electric shock. Take care not to touch the lens or the lens cover to avoid taking an unclear image or causing a camera malfunction. Avoid obstructing the lens or the flash when you capture an image. Low temperatures can affect the performance of the LCD monitor and you may experience the following problems. (These problems will usually disappear at normal operating temperatures and are perfectly normal.) - The time of power on can be delayed and the colour of LCD monitor can be changed slightly. - Fast movement, when pointing the camera at the subject, can make an afterimage appear on the LCD monitor. Credit cards may be demagnetized if left near case. Avoid leaving magnetic strip cards near the case.

Contents

System chart 5 Identification of features 6 Front & Top 6 Back & Bottom 7 Bottom/ 5-function button 8 Cradle (optional) 8 Self-timer lamp 9 Camera Status Lamp9 Mode icon 9 Connecting to a Power Source 9 Inserting the memory card 12 Instructions on how to use the memory card 12 When Using the Camera for the First Time 14 Pausing while recording a movie clip 19 How to use the VOICE RECORDING mode 19 Pausing while recording a voice 19 Things to watch out for when taking pictures 20 Using the camera buttons to set the camera 20 POWER button20 SHUTTER button 20 ZOOM W/ T button 21 Voice recording / Voice memo / UP button 22 Macro/ Down button 23 Focus lock 24 Flash / Left button 24 Self-timer / Right button 26 MENU/ OK button 27 +/- button 27 E (Effect) button31 Colour 31 Preset focus frames 32 Composite shooting 33 Photo Frame34 Movie Clip frame stabiliser 34 Using the LCD monitor to adjust the camera settings 35 How to use the menu 35 Size36 Quality/ Frame rate 36

[Successive recording of a movie clip]
If a camera button is pressed during the movie recording, camera operation sound can be recorded.
A distance of 40cm between you and the camera (microphone) is the best distance to record sound. If the camera power is turned off while the voice recording is paused, the voice recording is cancelled.
Things to watch out for when taking pictures
Pressing the shutter button down half way. Lightly press the shutter button to confirm focus and flash battery charge. Press the shutter button all way down to take the picture.
Using the camera buttons to set the camera
The recording mode function can be set up by using the camera buttons.
POWER button Used for turning the cameras power on/ off. If there is no operation during the specified time, the camera's power will be turned off automatically to save battery life. Refer to page 58 for more information about the auto power off function. SHUTTER button Used for taking an image or recording voice in the RECORDING mode. In MOVIE CLIP mode : Pressing the shutter button down fully starts the process for recording a movie clip. Press the shutter button once and the movie clip is recorded for as long as the available recording time in the memory allows. If you wish to stop recording, press the shutter button again. In STILL IMAGE mode Pressing the shutter button down halfway activates the autofocus and checks the condition of the flash. Pressing the shutter button down fully takes and stores the image. If you select voice memo recording, the recording will start after the camera has finished storing the image data.
[Lightly press the shutter button]
[Press the shutter button]
The available recording time may vary depending on shooting conditions and camera settings. When the Flash Off or Slow synchro mode is selected in a low lighting condition, the camera shake warning indicator ( ) may appear on the LCD monitor. In this case, use a tripod, support the camera on a solid surface or change to flash shot mode. Shooting against the light : Do not take pictures into the sun. Taking a picture against the sun may make the picture dark. To take a picture against the sun, please use the [Backlight] in the scene shooting mode (see page 18), fill-in flash (see page 25), spot metering (see page 37), or exposure compensation (see page 30). Avoid obstructing the lens or the flash when you capture an image. Compose the image by using the LCD monitor. Under certain conditions the auto focus system may not perform as expected. - When photographing a subject that has little contrast. - If the subject is highly reflective or shiny. - If the subject is moving at high speed. - When there is strong reflected light, or when the background is very bright. - When the subject matter has only horizontal lines or the subject is very narrow (such as a stick or flagpole). - When the surroundings are dark.

ZOOM W/ T button

This camera has a 3X optical zoom and a 5X digital zoom function. Using both will offer a total zoom ratio of 15X. WIDE Zoom Optical zoom WIDE : Pressing the ZOOM W button. This will zoom out from the subject i.e. the subject will appear farther away. Pressing the ZOOM W button continuously will set the camera to its minimum zoom setting i.e. the subject appears at its farthest from the camera.
TELE Zoom Optical zoom TELE : Pressing the ZOOM T button. This will zoom into the subject i.e. the subject will appear nearer. Digital zoom TELE : When the maximum (3X) optical zoom is selected, pressing the ZOOM T button activates the digital zoom software. Releasing ZOOM T button stops the digital zooming at the required setting. Once the maximum digital zoom (5X) is achieved, pressing the ZOOM T button will have no effect.
Pressing the ZOOM T button Pressing the ZOOM T button
Pressing the ZOOM W button

[ TELE zoom ]

[ Optical zoom 2X ]

[ WIDE zoom ]

Digital zoom WIDE

Optical zoom

Digital zoom [WIDE zoom] [TELE zoom] [Digital zoom 5X]
: When the digital zoom is in operation, pressing the ZOOM W button will reduce the digital zooming in steps. Releasing ZOOM W button stops digital zooming. Pressing the ZOOM W button will reduce the digital zoom and then it will continue to reduce the optical zoom until the minimum setting is reached.

[ Digital zoom 5X ]

Images taken using the digital zoom may take a little longer for the camera to process. Allow time for this to take place. You may notice a decrease in image quality when using the digital zoom. To view a clearer digital zoom image, press the shutter button halfway at the maximum optical zoom position and press the zoom T button again. The digital zoom can be activated in the [Nightscene], [Children], t [Closeup], [Text], [Fireworks] scene modes, the Movie clip mode, the ASR (Wise shot)mode and the [Highlight], [Photo Frame], [Composite] effect menu. Take care not to touch the lens as this may cause a camera malfunction.

Voice recording(

)/ Voice memo(

)/ UP button

While the menu is showing, press the UP button to move up the sub menu. When the menu is not displayed on the LCD monitor, the UP button operates as the voice recording or voice memo button. You can add your voice-over to a stored still image. Refer to page 19 for more information about the voice recording. Recording a voice memo 1. Rotate the MODE DIAL to select a RECORDING mode with the exception of MOVIE CLIP mode. 2. Press the VOICE MEMO ( ) button. If the voice memo indicator is displayed on the LCD monitor, the setting is completed.

Measure:Shutter

[White paper]
Exposure compensation : This camera automatically adjusts the exposure according to the ambient lighting conditions. You can also select the exposure value by using the + / - button. Compensating Exposure 1. Press the + / - button, and then use the UP and DOWN buttons to select the exposure compensation icon ( ). The exposure compensation menu bar will appear as shown. 2. Use the LEFT and RIGHT buttons to set the desired exposure ompensation factor. 3. Press the + / - button again. The value you set will be saved and the Exposure Compensation setup mode will close. If you change the exposure value, the exposure indicator ( ) will be displayed on the bottom of the LCD monitor. A negative exposure compensation value reduces the exposure. Note that a positive exposure compensation value increases the exposure and the LCD monitor will appear white or you may not get good pictures. Long Time shutter : This camera automatically adjusts the shutter speed and aperture values to the shooting environment. However, in NIGHT SCENE mode, you can set the shutter speed and aperture values to your preference. Adjusting the shutter speed and aperture values 1. Select the [Night] scene mode. 2. Press +/- button and Long Time shutter menu (LT, For selecting shutter speed and aperture value) will be displayed. 3. Configure the Long Time shutter value with the up/ down/ left/ right button. 4. Press the +/- button again. The value you set will be saved and the mode will switch to NIGHT SCENE AUTO, WIDE : F3.5 ~ F6.3, Aperture Value mode. TELE : F4.5 ~ F8.0

Shutter Speed AUTO,1~16S

E (Effect) button
It is possible to add special effects to your images by using this button. Available Effects, by recording mode (O : Selectable X : Not selectable) When you select 3072X1728 (Wide 5M) image size, you can only select the color menu of the special effects. Colour By using the cameras digital processor, it is possible to add special effects to your images. 1. Press the E button in the available camera modes and select the menu. 2. Select a desired sub menu by pressing the Up/Down button and press the OK button. : No effect is added to the image : Captured images will be stored in black and white. : Captured images will be stored in a sepia tone. : Captured images will be stored in a red tone. : Captured images will be stored in a green tone. : Captured images will be stored in a blue tone. : Save the image in negative mode. 3. Press the shutter button to capture an image.
Color HighLight Composite

) ) ) ) )

O X X X O

O X X X X

O O O O X
Photo Frame ( Stabilizer (

Sharpness

You can adjust the sharpness of the picture you are about to take. You cannot check the sharpness effect on the LCD monitor before you take a picture, because this function is applied only when the captured image is stored on the memory. - Soft

Soft Normal Vivid

Auto Focus type
You can select your preferred Auto Focus type according to the shooting condition. - Center AF : The rectangular area in the center of the LCD monitor will be focused - Multi AF : This camera selects a AF point from the 5 AF points.

Center AF Multi AF

: The edges of the image are softened. This effect is suitable for editing images on your PC. - Normal : The edges of the image are sharp. This is suitable for printing. - Vivid : The edges of the image are emphasized. The edges will appear sharp, but noise may occur in the recorded image.

[Center AF] [Multi AF]

[Program mode]
When the camera focuses on the subject, the auto focus frame turns too green. When the camera doesnt focus on the subject, the auto focus frame turns to red.
OSD(On Screen Display) information
In any mode with the exception of VOICE OSD INFORMATION RECORDING mode, you can check the recording Full Basic status in the LCD monitor. LCD Save Idle mode : If you select the [LCD Save] and the camera isn't operated during the specified time(about 30 SEC.), the camera power will become idle automatically (LCD monitor : OFF, Camera status lamp : Blinking). - To use the camera again, press any of the camera buttons except the power button. - If there is no operation during the specified time, the camera power will be turned off automatically to save battery life. Refer to page 58 for more information about the auto power off function.

LCD Save

Starting play mode
Turn the camera on and select Play mode by pressing the play mode button ( ). The camera can now play back the images stored in the memory. If the memory card is inserted in the camera, all the camera functions apply only to the memory card. If the memory card is not inserted in the camera, all the camera functions apply only to the internal memory. Playing back a still image 1. Select the PLAY mode by pressing the play mode button ( ). Playing back a movie clip 1. Select the recorded movie clip that you want to play back by using the LEFT/RIGHT button. 2. Press the play & pause button ( ) to play back a Play:/ Capture:E movie clip file. - To pause a movie clip file while playing it back, press the play & pause button again. - Pressing the play & pause button again will cause the movie clip file will restart. - To rewind the movie clip while it is playing, press the LEFT button. To fast forward the movie clip, press the RIGHT button. - To stop playback of the movie clip, press the play & pause button, and then press the LEFT or RIGHT button. Movie clip capture function : capture still images from the movie clip. How to capture the movie clip 1. Press the Play/ Pause button while playing the movie clip. Then press the E button. 2. The paused movie clip is saved in a new file name.

Resize

Change the resolution(size) of pictures taken. Select [Start image],[MP3 Skin] to save an image to be the start-up image, MP3 Skin. 1. Select a desired sub menu by pressing the RESIZE UP/ DOWN button and press the OK button. 2816X2112
2048X1536 1024X768 640X480 Start Image
Image Resize Types (O : Sectable X : Not Selectable)

DELETE

Select:T Del:OK
Size 7M 6M 5M 4M 3M 2M 1M VGA
2816X2112 2048X1536 O O X O X O X O X X X X X X X X

1024X768 O O O O O O X X

640X480 O O O O O O O X
Start Image O O O O O O O O

MP3 Skin O O O O O O O O

Del:OK
You can change the resolution of only those files compressed in the JPEG 4:2:2 format. The resized image will have a new file name. The [Start Image, MP3 Skin] image is stored not on the memory card but on the internal memory. Only two [Start Image, MP3 Skin] images can be saved. If you save a new [Start Image, MP3 Skin] image, the existing startup image will be deleted in order. If the memory capacity is insufficient to store the resized image, a [Memory Full!] message will display on the LCD monitor and the resized image will not be stored. The picture taken with 5M(Wide) can be resized only to 2560X1440, 1920X1080, 1280X720.

Rotating an image

You can rotate the stored images by various degrees. Once the playback of the rotated picture is finished, it will switch back to the original state. 1. Select a desired sub menu by pressing the UP/ DOWN button.
Right 90 Left Horizontal Vertical Exit:MENU Move:
DPOF (Digital Print Order Format) allows you to embed printing information on your memory cards MISC folder. Select the pictures to be printed and how many prints to make. The DPOF indicator will display on the LCD monitor when an image that has DPOF information plays back. Images can then be printed on DPOF printers, or at an increasing number of photo labs. This function is not available for Movie clips and Voice recording files. If a memory card is not inserted, the menus are still displayed in the LCD, but are not selectable.
[Before rotating the image]

[Right 90]

[Left 90]

[Horizontal]

[Vertical]
2. Press the OK button and the rotated image will be displayed. If you display the rotated image on the LCD monitor, empty spaces may appear to the left and right of the image.

DPOF : STANDARD

This function allows you to embed print quantity information on a stored image. 1. Select the [Standard] menu by pressing the UP/ DOWN button and press the RIGHT button. 2. Select a desired sub menu by pressing the UP/ DOWN button. [Select] : Selection window for an image to print is displayed. - Up/ Down/ Left/ Right : Select an image to print. - Zoom W/T Button : Select the number of prints. [All Pics] : Configure number of prints for all pictures except movie and voice files. - W/T button : Select a number of prints [Cancel] : Cancel the print setup. 3. Press the OK button to confirm the setting. If an image carries DPOF instructions, the DPOF indicator ( ) will show.

File Name Set whether to print the file name Auto, Off, On Some menu options are not supported on all printers. If not supported, the menus are still displayed in the LCD, but are not selectable.

Setup menu

In this mode, you can set up basic settings. In any camera modes, except Voice Recording and MP3, PMP, TEXT VIEWER modes, press the MENU button. Press the LEFT/RIGHT button and select the [SETUP] menu tab. The items indicated by are default settings. Menu tab Main menu File Power Off Sub menu Series Reset 1, 3, 5, 10min
ENGLISH DEUTSCH PCCK DANSK POLSKI

Menu tab

Main menu

Sub menu

Off Low Medium High
Secondary menu FRANAIS ITALIANO DUTCH SUOMI

p.58 USB p.58 AF Sound

ESPAOL PORTUGUS SVENSKA BAHASA Magyar -

AF Lamp

Language p.58 LCD -

Format

Date&Time

Imprint

No Yes 06/07/01 13:00 yy/mm/dd dd/mm/yy mm/dd/yy Off Off Date Date&Time

Video Out

p.59 Quick View
Computer Printer Off On Off On Dark Normal Bright NTSC PAL Off/ 0.5, 1, 3sec No Yes

Secondary menu -

p.60 p.60 p.60

p.61 p.62 p.62

[ File name ]
This function allows the user to select the file naming format. [Series] : New files are named using numbers that follow the previous sequence, even when a File Power Off new memory card is used, or after Language formatting, or after deleting all pictures. Format Date&Time [Reset] : After using the reset function, the next file Back: name will be set from 0001 even after formatting, deleting all or inserting a new memory card.

Series Reset

[ Auto power off ]
This function switches the camera off after a set amount of time in order to prevent unnecessary battery drainage. [1, 3, 5, 10min] : The power will turn off automatically if not used for the period of time specified.
File Power Off Language Format Date&Time Back: 1 min 3 min 5 min 10 min Set:OK

Move:

Select:OK

MP3 misty by J He

[PMP mode]
Animation Comic [SDC]-Movie sample.sdc

0:00:03/ 0:26:28

[SDC]-Movie sample.s

Who bent my camera?

[TEXT VIEWER mode]

001/001

TEXT.TXT
LCD monitor indicator for MP3/PMP/TEXT VIEWER mode
The LCD monitor displays information about the MP3, multimedia and Text file.
MP3 mode Battery (p.12) Indication of present TEXT TEXT VIEWER mode Battery (p.12) Equalizer TEXT Contents Type of play back (p.70) Bit rate (p.65)
Current page / Whole page Encoding Type (ANSI, Uni) Volume Indication

Playing time Time line

Play & Pause/ Control button (p.67)
Volume (p.67) Title of file
[TEXT VIEWER mode] Encoding Type : ANSI(American National Standards Institute) Type, Uni (Unicode) Type - When the ANSI encoding type is displayed : You should set the Language of the TEXT VIEWER menu to view the text. Set the Language menu as one that is the same as the Operating System language that the text was created. - When the UNI encoding type is displayed : The text file will be displayed with any language menu. If the text file size is over 10MB, it may take long time to view the text file. Divide the text file and the loading time will be shorten.
Play & Pause/ Control button(p.67) PMP mode Battery (p.12) Playing time Time line

Caption

[PMP mode] When you playback a movie converted with the Digimax Converter, there may be a white spot under the LCD monitor of the camera. It's not the camera malfunction and there are no problems to use the camera.
Volume button You can control the volume with this button. There are 0~30 steps Delete button This deletes files stored on the memory. 1. Select a desired file to delete on the browsing menu and press the Delete button. 2. A message will display as shown [Yes]: deletes the selected file. [No] : cancels "Delete files" and the browsing menu will display.
Play & Pause/ Control button When a file is playing back, press the Down button to pause the file. Pressing it again will resume playback. MP3 mode You can search the MP3 files by pressing the Left/ Right button. You cant search the MP3 file during play back. PMP mode You can search the Multimedia files by pressing the Left/ Right button. And you can search a desired frame of the file during play back by pressing the Left/ Right button. TEXT VIEWER mode When the text list menu is displayed : select a text file by pressing the Up/Down button. When the text is displayed : press the Up/Down button and previous / next page of the file will display.

MP3 BGM

MP3 : E
The camera settings are fixed to default setting of Auto mode ( , , , ). The settings cant be changed. If the memory card is not inserted, this function will not operate. Occasionally the next file will be played back when you press the Shutter button, even though a memory card is inserted. If the memory card is not inserted, the Auto mode will be selected when you press the Shutter button. To cancel the recording mode of the MP3 mode, press the E button or do not operate any buttons for about 10 seconds.
Language setting You can setup the language of OS (Operating System) that the text file was made. - If the characters of the text file don't display correctly, open the file on Windows 2000 or later and save it again. We recommend using 'Notepad' and it has to be saved as ANSI encoding type. - Some unique characters may not be displayed correctly on the camera.
ENG KOR FRA DEU ESP ITA CHN

Important notes

Be sure to observe the following precautions! This unit contains precision electronic components. Do not use or store this unit in the following locations. - Areas exposed to severe changes in temperature and humidity. - Areas exposed to dust and dirt. - Areas exposed to direct sunlight or the inside of a vehicle in hot weather. - Environments where there is high magnetism or excessive vibration. - Areas with high explosives or highly flammable materials. Do not leave this camera in places subject to dust, chemicals (like naphthalene and mothball), high temperature and high humidity. Keep this camera in a hermetically sealed box with silica gel when not planning to use it for a long period. Sand can be particularly troublesome to cameras. - Do not let sand get inside the unit when using it on beaches, coastal dunes, or other areas where there is lots of sand. - Doing so may result in failure or may permanently render the unit unusable. Handling the camera - Never drop the camera or subject it to severe shocks or vibrations. - Protect the large size LCD monitor from impact. When this camera is not used, keep this camera in the camera case. - Avoid obstructing the lens or the flash when you capture an image. - This camera is not waterproof. To avoid dangerous electrical shocks, never hold or operate the camera with wet hands. - If you use this camera in wet places, such as beach or pool, do not let water or sand get inside the camera. Doing so may result in failure or may permanently damage the unit. Extremes in temperature may cause problems. - If the camera is transferred from a cold to a warm and humid environment, condensation can form on the delicate electronic circuitry. If this occurs, turn the camera off and wait for at least 1 hour until all moisture is dispersed. Moisture build up can also occur in the memory card. If this happens, turn off the camera and remove the memory card. Wait until the moisture has dispersed. Caution on Using the Lens - If the lens is subjected to direct sunlight, it could result in discoloration and deterioration of the image sensor. - Don't get fingerprints or foreign substances on the surface of the lens. If the digital camera is not used for a long period, an electric discharge can occur. It is a good idea to remove the batteries and the memory card if you do not intend using the camera for an extended period of time. If the camera is exposed to an electronic interference, it will turn itself off to protect the memory card. Camera Maintenance - Use a soft brush (available from photo stores) to gently clean the lens and LCD assemblies. If this does not work, lens-cleaning paper with lens cleaning fluid can be used. Clean the camera body with a soft cloth. Do not allow this camera to come into contact with solvent materials such as benzol, insecticide, thinners etc. This may damage the body shell of the camera and also affect its performance. Rough handling can damage the LCD monitor. Take care to avoid damage and keep the camera in its protective carry case at all times when not in use.

For playing back a movie clip Mac OS 10.1~10.4 MPlayer, VLC Media Player
Digimax Master : This is the all-in-one multi media software solution. You can download, view, edit and save your digital images and movie clips clip with this software. This software is only compatible with Windows.
Setting up the application software
To use this camera with a PC, install the application software first. After this has been done, the stored images in the camera can be moved to the PC and can be edited by an image editing program. You can visit the Samsung web-site through the internet.
Be sure to check the system requirements before installing the driver. You should allow 5 ~ 10 seconds for running the automatic setup program. If the frame does not show, run the [Windows Explorer] and select [Samsung.exe] in the CD-ROM Drive root directory. PDF documents of user manual are included in the Software CD-ROM supplied with this camera. Search the PDF files with Window's explorer. Before opening the PDF files, you must install the Adobe Reader included in the Software CD-ROM. To install the Adobe Reader 6.0.1 correctly, Internet Explorer 5.01 or later had to be installed. Visit "www.microsoft.com" and upgrade the Internet Explorer.
http://www.samsungcamera.com : English http://www.samsungcamera.co.kr : Korean
1. The auto run frame will display. Click the [Install] menu in the Auto run frame.
2. Install the camera driver and DirectX by selecting a button shown on the monitor.
3. To play back the movie clip recorded with this camera on the computer, install the XviD codec. 4. Install the software by instructions on the monitor.
The XviD codec is distributed according to and under the terms and conditions of the GNU General Public License and everyone can copy, modifiy and distribute this codec freely, but WITHOUT ANY WARRANTY, IMPLIED OR EXPRESSED, OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE; provided, however, that you have to follow the GNU General Public License whenever you are distributing this codec or modification thereof. For more information see the GNU General Publice License documents (http://www.gnu.org/copyleft/gpl.html).
5. After restarting the computer, connect the PC to the camera with the USB cable. 6. Turn the camera power on. The [Found New Hardware Wizard] will open and the computer will recognize the camera.

Starting PC mode

If you connect the USB cable to a USB port on your PC and then turn on the power, the camera will automatically switch to "computer connection mode". In this mode, you can download stored images to your PC through the USB cable. The LCD monitor is always turned off in PC mode. Connecting the camera to a PC 1. In any mode with the exception of Voice SETUP Recording mode, press the Menu button. Format Computer Date&Time Printer 2. Press the LEFT/ RIGHT button and select the Imprint [SETUP] menu tab. Sound USB 3. Select the [USB] menu by pressing the UP/ Back: Set:OK DOWN button and press the RIGHT button. 4. Use the UP and DOWN buttons to select [Computer], and then press the OK button. 5. Press the menu button twice and the menu will disappear. 6. Connect the PC to the camera with the USB cable.

If your OS is Windows XP, an image viewer program will open. If the download window of Digmax Master opens after starting Digimax Master, the camera driver was setup successfully.
If you have installed the camera driver, The [Found New Hardware Wizard] may not open. On a Windows 98 or 98 SE system, the Found New Hardware Wizard dialog box opens and a window asking you to select a driver file may appear. In this case, specify "USB Driver" in the CD supplied.
Connecting the camera to a PC
[Using the USB cable with Cradle (optional) ]

Removable Disk

Downloading stored images You can download the still images stored on the camera to your PC's hard disk and print them or use a photo editing software to edit them. 1. Connect the camera to your PC with the USB cable. 2. On your computer's desktop display, select [My computer] and double click [Removable Disk DCIM 100SSCAM].
If you selected [Printer] in Step 4, when you connect the camera to your printer, the [Connecting Printer] message will display and the connection will not be established. In this case, disconnect the USB cable, and then follow the procedure from Step 2 and onward. Disconnecting the camera and PC : Refer to page 84 (Removing the removable disk).
3. Select an image and press the right mouse button.
Before inserting any cables or AC adapter, check the directions and do not insert by force. It may cause breakage of cable or camera.
4. A pop-up menu will open. Click the [Cut] or [Copy] menu. - [Cut] : cuts a selected file. - [Copy] : copies files.
5. Click a folder where you want to paste the file.
6. Press the right mouse button and a pop-up menu will open. Click [Paste].
Removing the removable disk
Windows 98/ 98SE 1. Check whether the camera and PC are transferring a file. If the camera status lamp blinks, please wait until the lamp has finished blinking and is constantly on. 2. Unplug the USB cable. Windows 2000/ ME/ XP (The illustrations may differ from those shown depending on the Windows O/S.) 1. Check whether the camera and PC are transferring a file. If the camera status lamp blinks, please wait until the lamp has finished blinking and is constantly on. 2. Double-click the [Unplug or Eject Hardware] icon on the task bar.

Correct Disposal of This Product
Correct Disposal of This Product (Waste Electrical & Electronic Equipment) (Applicable in the European Union and other European countries with separate collection systems) This marking shown on the product or its literature, indicates that it should not be disposed with other household wastes at the end of its working life. To prevent possible harm to the environment or human health from uncontrolled waste disposal, please separate this from other types of wastes and recycle it responsibly to promote the sustainable reuse of material resources. Household users should contact either the retailer where they purchased this product, or their local government office, for details of where and how they can take this item for environmentally safe recycling. Business users should contact their supplier and check the terms and conditions of the purchase contract. This product should not be mixed with other commercial wastes for disposal.

FCC notice

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not in-stalled and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/ TV technician for help. CAUTION : Changes or modifications not expressly approved by the manufacturer responsible for compliance could void the users authority to operate the equipment.
Declaration of Conformity Trade Name : SAMSUNG TECHWIN Model No. : Samsung NV3 Responsible Party : Samsung Opto-Electronics America, INC. Address : 40 Seaview Dr. Secaucus,NJ 07094 Telephone No. : 201-902-0347 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

SAMSUNG TECHWIN CO., LTD. OPTICS & DIGITAL IMAGING DIVISION 145-3, SANGDAEWON 1-DONG, JUNGWONGU, SUNGNAM-CITY, KYUNGKI-DO, KOREA 462-121 TEL : (82) 31-740-8086, 8088, 8090, 8092, 8099 FAX : (82) 31-740-8398 www.samsungcamera.com SAMSUNG OPTO-ELECTRONICS AMERICA, INC. HEADQUARTERS 40 SEAVIEW DRIVE, SECAUCUS, NJ07094, U.S.A. TEL : (1) 201-902-0347 FAX : (1) 201-902-9342 WESTERN REGIONAL OFFICE 18600 BROADWICK ST., RANCHO DOMINGUEZ, CA 90220, U.S.A. TEL : (1) 310-900-5263/5264 FAX : (1) 310-537-1566 www.samsungcamerausa.com
SAMSUNG FRANCE S.A.S. BP 51 TOUR MAINE MONTPARNASSE 33, AV.DU MAINE 75755, PARIS CEDEX 15, FRANCE HOTLINE PHOTO NUMRIQUE : 37 27(Numro Vert-Appel Gratuit) TEL : (33) 1-4279-2200 FAX : (33) 1-4320-4510 www.samsungphoto.fr SAMSUNG OPTO-ELECTRONICS GMBH AM KRONBERGER HANG 6 D-65824 SCHWALBACH/TS., GERMANY TEL : 49 (0) FAX : 49 (0) www.samsungcamera.de TIANJIN SAMSUNG OPTO-ELECTRONICS CO.,LTD. 7 PINGCHANG ROAD NANKAI DIST., TIANJIN P.R CHINA POST CODE : 300190 TEL : (86) 22-2761-4599 FAX : (86) 22-2769-7558 www.samsungcamera.com.cn
SAMSUNG OPTO-ELECTRONICS UK LIMITED SAMSUNG HOUSE 1000 HILLSWOOD DRIVE HILLSWOOD BUSINESS PARK CHERTSEY KT16 OPS U.K. TEL : (free for calls from UK only) UK Service Hotline : 01932455320 www.samsungcamera.co.uk RUSSIA INFORMATION CENTER SAMSUNG ELECTRONICS 117545 ST. DOROZHNAYA BUILDING 3, KORPUS 6, ENTRANCE 2, MOSCOW, RUSSIA TEL : (7) 095-363-1700 CALL FREE : (8) (from Russia only) www.samsungcamera.ru
Internet address - http : //www.samsungcamera.com The CE Mark is a Directive conformity mark of the European Community (EC)

6806-0094