Visit www.fisher-price.com to see the entire world of GeoTrax accessories!
Please keep this instruction sheet for future reference, as it contains important information. Requires one AAA battery (included). Adult assembly is required for battery replacement. Tool required for battery replacement: Phillips screwdriver (not included). Wipe this toy with a clean cloth dampened with a mild soap and water solution. Do not immerse this toy. This toy has no consumer serviceable parts. Do not take this toy apart.

Battery Replacement

Battery Compartment Door

1.5V x 1 AAA (LR03)

For best performance, we recommend replacing the battery that came with this toy with a new AAA (LR03) alkaline battery. Loosen the screws in the battery compartment door with a Phillips screwdriver. Remove the battery compartment door. Remove the exhausted battery and throw it away. Insert a new AAA (LR03) alkaline battery. Hint: We recommend using an alkaline battery for longer battery life. Replace the battery compartment door and tighten the screws with a Phillips screwdriver. Do not over-tighten. If toy begins to operate erratically, you may need to reset the electronics. Remove the battery from the toy and replace it. When sounds or lights become faint or stop, its time for an adult to change the battery! Protect the environment by not disposing of this product with household waste (2002/96/EC). Check your local authority for recycling advice and facilities (Europe only).
Battery Safety Information
In exceptional circumstances, batteries may leak fluids that can cause a chemical burn injury or ruin your toy. To avoid battery leakage: Do not mix old and new batteries or batteries of different types: alkaline, standard (carbon-zinc) or rechargeable (nickel-cadmium). Insert batteries as indicated inside the battery compartment. Remove batteries during long periods of non-use. Always remove exhausted batteries from the toy. Dispose of batteries safely. Do not dispose of the product in a fire. The batteries inside may explode or leak. Never short-circuit the battery terminals. Use only batteries of the same or equivalent type, as recommended. Do not charge non-rechargeable batteries. Remove rechargeable batteries from the toy before charging. If removable, rechargeable batteries are used, they are only to be charged under adult supervision.
Exciting Lights and Sounds!
Press the button on top of the vehicle for exciting lights and sounds.
Call our Consumer Relations Department, toll-free at 1-800-432-5437, 9 AM - 7 PM EST Monday through Friday and 11 AM - 5 PM EST Saturday. Hearing-impaired consumers using TTY/TDD equipment, please call 1-800-382-7470. Write to us at: Fisher-Price Consumer Relations, 636 Girard Avenue, East Aurora, New York 14052. FCC Statement (United States Only) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Consult the dealer or an experienced radio/TV technician for help. Note: Changes or modifications not expressly approved by the manufacturer responsible for compliance could void the users authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference and (2) this device must accept any interference received, including interference that may cause undesired operation. ICES-003 This Class B digital apparatus complies with Canadian ICES-003. Operation is subject to the following two conditions: (1) this device may not cause harmful interference and (2) this device must accept any interference received, including interference that may cause undesired operation. NMB-003 Cet appareil numrique de la classe B est conforme la norme NMB-003 du Canada. Lutilisation de ce dispositif est autorise seulement aux conditions suivantes: (1) il ne doit pas produire de brouillage et (2) lutilisateur du dispositif doit tre prt accepter tout brouillage radiolectrique reu, mme si ce brouillage est susceptible de compromettre le fonctionnement du dispositif. For countries outside the United States: CANADA: Questions? 1-800-432-5437. Mattel Canada Inc., 6155 Freemont Blvd., Mississauga, Ontario L5R 3W2; www.service.mattel.com. GREAT BRITAIN: Mattel UK Ltd, Vanwall Business Park, Maidenhead SL6 4UB. Helpline: 01628 500303; www.service.mattel.com/uk. AUSTRALIA: Mattel Australia Pty. Ltd., 658 Church Street, Locked Bag #870, Richmond, Victoria 3121 Australia. Consumer Advisory Service 312. NEW ZEALAND: 16-18 William Pickering Drive, Albany 1331, Auckland. ASIA: Mattel East Asia Ltd, Room 1106, South Tower, World Finance Centre, Harbour City, Tsimshatsui, HK, China. Fisher-Price, Inc., a subsidiary of Mattel, Inc., East Aurora, NY 14052 U.S.A. 2009 Mattel, Inc. All Right Reserved. and designate U.S. trademarks of Mattel, Inc. P8965pr-0920 PRINTED IN CHINA

A. B. 4 End Rails 4 Side Rails 4 Supports Span Main Tower 4 Small Towers 2 Span Ends

www.fisher-price.com

C. D. E. F. G.
Please keep this instruction sheet for future reference, as it contains important information. Adult assembly is required. No tools needed for assembly. Younger children may need parental assistance building elevated GeoTrax layouts. The more your child plays with these toys, and development and skill increases, the less assistance your child will need!
For layout ideas visit the GeoTrax section of www.fisher-price.com

x4 x4 Care

Wipe the toy with a clean cloth dampened with a mild soap and water solution. Do not immerse the toy.
Questions? We'd like to hear from you!
Call Fisher-Price Consumer Relations, toll-free at 1-800-432-KIDS (5437), 8 AM - 6 PM EST Monday through Friday. Hearing-impaired consumers using TTY/TDD equipment, please call 1-800-382-7470. Or, write to: Fisher-Price Consumer Relations, 636 Girard Avenue East Aurora, New York 14052, U.S.A.
For other countries outside the United States: Canada: call 1-800-567-7724, or write to: Mattel Canada Inc., 6155 Freemont Blvd., Mississauga, Ontario L5R 3W2. Great Britain: telephone 01628 500302. Australia: Mattel Australia Pty. Ltd., 658 Church Street, Locked Bag #870, Richmond, Victoria 3121 Australia. Consumer Advisory Service 312. New Zealand: 16-18 William Pickering Drive, Albany 1331, Auckland. Asia: Mattel East Asia Ltd, Room 1106, South Tower, World Finance Centre, Harbour City, Tsimshatsui, HK, China.
PART NOT SHOWN: Trolley Car
Sky High Suspension Bridge
Fisher-Price, Inc., a subsidiary of Mattel, Inc., East Aurora, NY 14052 U.S.A. 2004 Mattel, Inc. All Right Reserved. and designate U.S. trademarks of Mattel, Inc.
PRINTED IN CHINA C5216a-0920

Assembly

Multiple Levels of Track Layouts!

TRACK NOT INCLUDED

SIDE RAIL

SPAN END

Snap the span ends onto the span.

MAIN TOWER

Snap the four side rails into the main tower, as shown. To build a ground-level layout, separate the span assembly from the supports and place the span assembly on the floor. Attach straight tracks (sold separately) to either end of the span assembly.
Use an Elevation Track Pack (sold separately) to access the suspension bridge. Attach ramp assemblies (sold separately) to the ends of the span.

SQUARES SUPPORT

Locate the square mark on both the side of a support and on the span assembly. Match the squares and snap the support into the underside of the span assembly, as shown. Snap the remaining supports into the span matching the square marks on each.
Snap each of the towers onto the span assembly.

END RAIL

Assembly is now complete!

SMALL TOWER SQUARE

Locate the square mark near the bottom of each small tower. With the square marks facing out, snap the small towers to the side rails, as shown. Snap the end rails to the small towers, as shown.
Use supports and straight tracks (sold separately) to build an elevated assembly.
The more you collect, the more fun it gets!
Playsets and accessories sold separately and subject to availability. Two of each Elevation Track Packs used to make this configuration.