Universal Remote Control URC-R6
Here you can find all about Universal Remote Control URC-R6 like codes list and other informations. For example: how to program, setup, user manual.
Universal Remote Control URC-R6 manual (user guide) is ready to download for free.
On the bottom of page users can write a review. If you own a Universal Remote Control URC-R6 please write about it to help other people. [ Report abuse or wrong photo | Share your Universal Remote Control URC-R6 photo ]
Universal Remote Control URC-R6 - Specs Sheet, size: 1.4 MB
Universal Remote Control URC-R6
User reviews and opinions
|boris||1:43am on Tuesday, November 2nd, 2010|
|This is e best remotecontrol I see|
|dgasparin||3:39am on Friday, October 8th, 2010|
|Pretty solid remote. Has most of the buttons that a universal remote should have, feels well constructed.|
|modybick||7:02pm on Friday, June 18th, 2010|
|Easy read buttons, lightweight, little oversize remote. Come with instructions and code inside. It does only one easy set up on TV.|
Comments posted on www.ps2netdrivers.net are solely the views and opinions of the people posting them and do not necessarily reflect the views or opinions of us.
Congratulations on purchasing Universal Remote Controls AVEX R6 Pre--Programmed and Learning remote control. You now have the power to control your entire home entertainment system with one easy-to--use remote. The AVEX R6 can be used with thousands of audio/video components because of the extensive library of codes that have already been programmed into the remote. So. get ready to sit back, relax, and simplify your home entertainment experience. This Owners Manual is designed to assist you in programming your AVEX R6 remote to work with your components by guiding you through an easy step-bystep process. Everything you need to know about programming the AVEX R6 is contained in this Manual. AVEX R6 Owners Manual 2009 Universal Remote Control, Inc. This document is protected by the copyright laws of the United States and internationally by the Berne Convention. No part of this manual may be reproduced in any form without the express written consent of Universal Remote Control, Inc. Although reasonable care has been taken to assure the accuracy of the information herein contained, Universal Remote Control, Inc. is not responsible for operational, technical or editorial errors or omissions. The specifications and information in this manual may be subject to change without notice. MacroPower and SimpleSound are trademarks of Universal Remote Control, Inc. Entertainment Made Simple is a registered trademark of Universal Remote Control, Inc. All other brand or product names are trademarks or registered trademarks of their respective owners.
500 Mamaroneck Avenue, Harrison, NY 10528 Phone: (914) 835-4484 Fax: (914) 835-4532
Table of Contents
Getting Started - Overview Control up to 6 Components..4 Component Buttons..4 Battery Installation..4 Low Battery Warning..5 Couch Mode..5 Keypad Layout & Button Functions.6 Programming AVEX R6 Using Pre-Programmed Codes..7 Quick Set-Up Method..7 Three-Digit Code Entry Method.8 Auto-Search Method..10 Programming AVEX R6 Using the Learning Method.12 Special Advanced Features.14 Programming Automated Activities.14 MacroPower Total System On/Off.14 Programming Multi-Commands to Macro Buttons...16 My Favorites Favorite Channels.17 More Favorite Channels..18 SimpleSound Total System Volume Control.19 Channel Control Punch Through.21 Transport Control Punch Through.22 OSD (On-Screen Display) Control Punch Through..23 Input Switching Macros..24 Erasing Commands-Overview.25 Erasing a Single Learned Command.25 Erasing All Learned Commands from One Component..26 Erasing MacroPower & Other Macro Commands..27 Erasing SimpleSound & Other Punch Through Commands.28 Factory Reset...29 Finding a Components Set-Up Code Number..30 Pre-Programmed Code Tables.31 CABLE/SAT..32 TV..33-34 DVR/VCR..35-36 DVD..37 AUDIO..38 AUX..39 FAQs..40 Warranty..41 Specifications..41
Getting Started - Overview
Control up to 6 Components The AVEX R6 remote control is designed to control up to six different Audio/Video components and operate virtually all brands of AUDIO, TV, DVD, VCR/DVR, SAT/CABLE and AUX (Light, Music Server, etc.) components. Component Buttons Once you have programmed the AVEX R6 for all of your components, all you need to do is press a component button and all the buttons on the AVEX R6 will work with that component. For example, when you press the TV component button, all the buttons on your AVEX R6 will operate your TV. If you press the DVD component button, all the buttons on the AVEX R6 will operate your DVD. Each time you press any of the buttons on the remote, the LED light in the component button will light up to indicate which component you are controlling.
Silences the Audio. Press to activate. Press again to restore sound to the previous level.
Use to enter code numbers for programming components and to enter channel numbers to tune in channels. Also used to make numeric entries on on-screen menus.
Controls Picture-InPicture actions.
Programming AVEX R6 using Pre-Programmed Codes
There are three different ways you can program your AVEX R6 using the component brand codes that are pre-programmed into the remote. One of these will work for you! Quick Set-Up Method Three-Digit Code Entry Method Auto-Search Method ***
TRY THIS FIRST!
Quick Set-Up Method STEP 1: Manually or using your old remote, turn on the component you want to programfor example, to program your TV, turn on your TV set. STEP 2: Point the AVEX R6 toward the component that you want to program (in this case the TV set) and press and hold the component button (in this case the TV button). While holding down the component button, begin to press numeric keys, one number at a time, starting from 1, continuing to 2, 3. 0 until component (in this case the TV) turns off. STEP 3: Release the component button to save the code. The component LED light will blink three times to confirm that the code has been stored. Repeat the above three steps for other components.
IF QUICK SET-UP DID NOT WORK, TRY THIS NEXT:
Three-Digit Code Set-Up Method STEP 1: Find the 3-digit code numbers assigned to your brand from the lists in the back of this manual. The codes are listed by component category (i.e., TV, VCR, DVD, etc.), then by brand name. For instance, if you would like to locate a code for a Sony television, first locate the TV category and then look for the Sony brand. STEP 2: Once you have located the 3-digit codes for each of the components that you wish to operate with your AVEX R6, write them ALL down on a piece of paper. Its important that you write down all the codes listed for your brand because only one code is going to work with your component. STEP 3: Manually or using your old remote, turn on the component you want to programfor example, to program your TV turn on your TV set. STEP 4: On the AVEX R6, press the Component button that you want to program (in this case the button that says TV) and the SELECT [SEL] button at the same time. Hold down both buttons for 2 seconds until the TV Component LED light turns on. This signals that you are in programming mode. IMPORTANT: You have 30 seconds to perform the next step while you are in programming mode. If you do not press a button within 30 seconds,the component LED light will turn off. The remote will exit the programming mode and you will have to start over.
STEP 5: Point the AVEX R6 toward the component (in this example the TV) and punch in the first 3-digit code that you wrote down for that specific component. Use the Number buttons 09 on the remote to punch in the code. The TV LED light will blink each time a number is pressed.
If the 3-digit code number you just punched in is the correct number, the component you are trying to program will turn off. If it did not turn off, enter the next code number from your list until it does turn off. STEP 6: Once youve entered the code number and the component has turned off, press the POWER button on the AVEX R6 remote to turn the component back on. Next test the VOLUME and CHANNEL buttons (or PLAY and STOP buttons for VCR and DVD) to make sure they all work. For example, perhaps your Sony TV turned off with code number 147, but the volume controls did not work properly. In this case, try the next code number listed for that component. Repeat Step 5 using the next code number until you find a perfect match. STEP 7: Once youve entered a correct code you must save it. Press the component button you just programmed (in this case TV) one more time to save the code number. The component LED light will blink three times to confirm that the code was successfully stored. Now when you press the TV component button, all of the buttons will work with your TV. Program the remaining components by repeating steps 3 through 7. IMPORTANT: If you have tried all the set-up codes in the list and the component still did not turn off after Step 5, either the Auto-Search Method (page 10) or the Learning Method (page 12) will help you program.
If the Three Digit Code did not work, try this next:
Auto-Search Method The Auto-Search Method is a way you can scan through all of the codes in the table to find the right code for your component. STEP 1: Manually or using your old remote, turn on the component you want to programfor example, to program your TV, turn on your TV set. STEP 2: On the AVEX R6, press the Component button that you want to program (in this case the button that says TV) and the SELECT [SEL] button at the same time. Hold down both buttons for 2 seconds until the TV Component button light turns on. This signals that you are in programming mode. IMPORTANT: You have 30 seconds to perform the next step while you are in programming mode. If you do not press a button within 30 seconds, the component LED light will turn off. The remote will exit the programming mode and you will have to start over.
STEP 5: Once the AVEX R6 has learned all the buttons in the selected component mode, press and hold the Component button and ENTER [ENT] buttons at the same time to save the learned functions. The component LED light will blink three times to confirm the programming. Now test all the buttons to make sure they learned correctly. Repeat Steps 1-5 to program any other component modes. If the Learning Method does not work, here are a few suggestions: If you have a Plasma TV, move to another room. Avoid programming under fluorescent light or direct sunlight. Put new batteries in the old remote. Gradually vary the distance between the two remote controls. Tap the button on your old remote instead of pressing and holding it during the learning process. Here are some additional facts regarding the Learning process: Learned functions override any existing pre-programmed functions on the remote control. Learned functions are automatically erased when a new function is learned on the same button. Learned functions are retained even after a different set-up code number is programmed into the remote control. To return to an original pre-programmed function, a learned function must to be erased.
(9:00AM-6:00PM EST) Page 13
Special Advanced Features
Programming Automated Activities The AVEX R6 has six Macro buttons (POWER, SYSTEM OFF, A, B, C, D) that are designed to store up to 20 commands in each button. Pressing any one of the Macro buttons, or Automated activity, will send out the series of commands that are stored in that particular button. MacroPower Total System On/Off MacroPower makes several devices work together by pressing one button. Imagine the convenience of turning on your TV, your DVD player and your Surround Sound receiver by pressing a single button on your AVEX R6. What could normally take three remotes and three button pushes, the AVEX R6 can accomplish with the press of one button. We call that MacroPower. Any of the Power On or the System Off buttons can be programmed for MacroPower control. To set it up, follow these easy steps: STEP 1: To program MacroPower commands for the Power ON button, press the POWER button and the MUTE button at the same time for 2 seconds until one of the component button LED lights turns on.
IMPORTANT: You have 30 seconds to perform the next step while you are in programming mode. If you do not press a button within 30 seconds, the component LED light will turn off. The remote will exit the programming mode and you will have to start over. STEP 2: Press the component button you want to turn on and then the POWER button; repeat for all other components in the order you want them to turn on. The component LED lights will blink once each time you press the POWER button.
POWER COMPONENT BUTTONS
STEP 3: Once youve entered all the Power On commands, press the CHANNEL UP button to save your MacroPower commands. The component LED lights will blink three times to confirm that the programming has been successfully saved. CHANNEL UP
SUGGESTION: Most of the components have the same signal to turn the power On and Off. You may want to program MacroPower only in the POWER button and save the System Off button to turn components On or Off individually. Note: If you want to program MacroPower for the SYSTEM OFF button, repeat the same steps used for Power ON programming.
Notes regarding programming multicommands to Macro buttons: You can program up to 20 commands on each Macro button. You can program delays in between commands by pressing the PAUSE button. Each press adds a one-half second delay. Also, if you add the delay time as the first step of Macro commands, the remote will not send the Macro unless the button is held for two seconds. (This is the Press & Hold Function). You can also program macro commands in layers by pressing the STOP button in between commands. (For example, if you press CBL, 009, STOP, 035, STOP, 365, STOP and the CH+ button in Step 2) the remote will send out 009 at the first press of the A button, and then send out 035 at the second press, etc. You cannot program the CH+ or PAUSE buttons as macro commands.
(9:00AM-6:00PM EST) Page 16
Programming My Favorites - Favorite Channel Buttons In Cable mode, the A, B, C, D buttons are also designed to serve as dedicated Favorite Channel buttons. Each button will access one of your favorite channels with just one button press. Heres how to program Favorite Channels: STEP 1: Press the CBL button to select the Cable mode. STEP 2: Press the A, B, C or D button and the MUTE button at the same time for 2 seconds until the CBL component LED turns on. IMPORTANT: You have 30 seconds to perform the next step while you are in programming mode. If you do not press a button within 30 seconds, the component LED light will turn off. The remote will exit the programming mode and you will have to start over.
MUTE A BUTTON
STEP 3: Using the Number Pad, punch in the Channel number of the Favorite Channel that you want to store in the Macro button. The Cable component LED light will blink once for each button pressed. STEP 4: Press the CHANNEL UP button to store the commands entered. The CBL component LED will blink three times to confirm the programming.
More Favorite Channels You can also use the "A, B, C and D" buttons to program favorite channels. Each button can program up to 5 favorite channels (or a total of 20 button presses), but you're not limited to using these buttons for only that. You can record any series of button presses into a macro. This is great switching video or audio sources. Here is an example of how to program a macro on the "A" button with three favorite channels. We'll use "25, 50, and 75." STEP 1: Press the device you are getting channel control from. Ex. Cable. STEP 2: Press and hold the "A" button and "Mute" button at the same time until a device button lights up. STEP 3: Press "2". STEP 4: Press "5". STEP 5: Press "Select". STEP 6: Press "Stop". STEP 7: Press "5". STEP 8: Press "0". STEP 9: Press "Select". STEP 10: Press "Stop". STEP 11: Press "7". STEP 12: Press "5". STEP 13: Press "Select". STEP 14: Press "Stop". STEP 15: Press "Channel Up" to save macro. Note: Pressing the "Select" button just assures the quickest response from the Cable box. Pressing "Stop" allows you to program several favorite channels on one button. Now, the first press of the "A" button will change the channel to "25." The second, to "50" and the third, to "75." Then the sequence starts all over again.
SimpleSound Total System Volume Control SimpleSound is one of the most exciting features of the AVEX R6. It gives you total volume control over ALL the components in your system, even those that do not have built--in volume control, such as TIVO, DVD and VCR. SimpleSound saves you the hassle and inconvenience of constantly switching between component modes just to control volume. First you should identify which device in your system will be used to deliver sound. In a basic system, the sound may come from your TV speaker. In a more advanced system, the sound may come from your audio components (such as a Surround Sound Receiver or Home Theatre system). Now, lets set--up SimpleSound. Heres how: STEP 1: Press and hold the button that corresponds to the Component you want to add volume control to (such as a DVD or VCR) and the SELECT (SEL) button at the same time for about three seconds until the component LED light turns on. IMPORTANT: You have 30 seconds to perform the next step while you are in programming mode. If you do not press a button within 30 seconds, the component LED light will turn off. The remote will exit the programming mode and you will have to start over.
STEP 2: Press the VOLUME UP button and then press either the TV or AUDIO component button that you want to use for volume. The Component LED light will blink three times to confirm that it is saved. This sets up three buttons (Volume Up, Volume Down and MUTE) as a group for that component. VOLUME UP
Repeat Steps 1-2 for all other components. Note: SimpleSound is whats technically referred to as a Punch Through feature and is not limited to volume control. It can also be applied to other groups of buttons. If you find yourself switching to a particular component mode frequently to access a particular control, consider using Punch Through.
Channel Control Punch Through This Punch Through enables you to program the AVEX R6 so that either the Cable or TV Channel Controls (CHANNEL UP, DOWN, LAST, CHANNEL NUMBERS 0-9, +10 and ENTER) will also operate in other component modes on the remote control. STEP 1: Press and hold the component button you want to add channel control to, such as DVD or VCR, and the SELECT [SEL] button at the same time for two seconds until the Component LED light turns on. IMPORTANT: You have 30 seconds to perform the next step while you are in programming mode. If you do not press a button within 30 seconds, the component LED light will turn off. The remote will exit the programming mode and you will have to start over. STEP 2: Press the CHANNEL UP button. The component LED light will blink once.
STEP 3: Press either the TV or CBL button that you want to use as the source of channel control. The component LED will blink three times to confirm it is saved.
Transport Control Punch Through This Punch Through enables you to program the AVEX R6 so that VCR or DVD Transport Controls (PLAY, STOP, FF, REW, PAUSE, SKIP and RECORD) will also operate in other component modes on the remote control. STEP 1: Press and hold the component button you want to add Transport Control to, such as CBL or TV, and the SELECT [SEL] button at the same time for two seconds until the Component LED light turns on. IMPORTANT: You have 30 seconds to perform the next step while you are in programming mode. If you do not press a button within 30 seconds, the component LED light will turn off. The remote will exit the programming mode and you will have to start over. Press the PLAY button. The component LED light will blink once.
STEP 3: Press either the DVD or VCR button that you want to use as the source of Transport Control. The component LED will blink three times to confirm it is saved.
OSD (On-Screen Display) Control Punch Through This Punch Through enables you to program the AVEX R6 so that CBL or DVD OSD Controls (MENU, GUIDE, INFO, EXIT, SEL and 4 Cursor Controls) will also operate in other component modes on the remote control. STEP 1: Press and hold the component button you want to add OSD Control to, such as TV or VCR, and the SELECT [SEL] button at the same time for two seconds until the Component LED light turns on. IMPORTANT: You have 30 seconds to perform the next step while you are in programming mode. If you do not press a button within 30 seconds, the component LED light will turn off. The remote will exit the programming mode and you will have to start over. STEP 2: Press the MENU button. The component LED will blink once.
STEP 3: Press either the CBL or DVD button that you want to use as the source of OSD Control. The component LED will blink three times to confirm it is saved.
Input Switching Macros These macros can be difficult and will vary depending on your specific setup. Because most TVs have a "Toggle" input feature, there's no way to jump to a specific video source discretely. "Toggle" means that you have one button on your remote that cycles through all available video sources (inputs) on your TV. With a Toggle input feature, you will need to set a starting point (default input). Since you are most likely watching Cable TV most of the time, you might want to set that input at the starting point. So you'll be programming your macros assuming that you are always on the Cable input. Now, what you'll have to do is figure out how many presses of the input button it will take to get to the desired video source, then how many presses it will take to get back to the staring point. This way, you can use the "B" button to switch to the "DVD" input, then back to the "Cable input" and maybe the "C" button to switch to the "VCR" input, then back to the "Cable" input. Below is an example of a macro on the "B" button that switches video sources on your TV to the "DVD" input. Let's say that it takes 2 presses of the input button to get to the "DVD" input (from the starting point) and 3 presses of the input button to get back to the "Cable" input. STEP 1: Press and hold the "B" button and "Mute" button at the same time until a device button lights up. STEP 2: Press "TV". STEP 3: Press "Input". STEP 4: Press "Pause". STEP 5: Press "Input". STEP 6: Press "Stop". STEP 7: Press "TV". STEP 8: Press "Input". STEP 9: Press "Pause". STEP 10:Press "Input". STEP 11:Press "Pause. STEP 12:Press "Input". STEP 13:Press "Stop". STEP 14:Press "Channel Up" to save macro. Pressing "Pause" in between input commands will add a small delay after each press of the input button. This will assure that all commands get sent properly. Much like in the previous example, pressing the "Stop" button allows you to start a new macro. So, the first press of the "B" button will change inputs to the "DVD" video source and the second press will change back to the starting point. It is important to always switch back to the default starting point. This way it sets up the next macro on another "Favorites" button to execute properly.
Erasing Commands -- Overview
You can erase a single learned command, all learned commands in each component mode, SimpleSound programming, MacroPower commands, or re--set the remote to original factory default settings. Erasing a Single Learned Command from One Component STEP 1: Press the component button where the learned command is stored and the ENTER buttons at the same time for two seconds until the component LED light turns on. IMPORTANT: You have 30 seconds to perform the next step while you are in programming mode. If you do not press a button within 30 seconds, the component LED light will turn off. The remote will exit the programming mode and you will have to start over.
STEP 2: Press and hold the button you want to erase for two seconds. The component LED light will blink twice to confirm the erasure. STEP 3: Repeat Step 2 to erase any other buttons in the selected component mode. STEP 4: To exit Erase mode, press and hold both the component button and the ENTER (ENT) button at the same time until the component LED light blinks three times.
Erasing All Learned Commands from One Component This function allows you to erase all the learned commands from one component. For example, if you want to erase all learned commands on the TV component button because you bought a new TV, the process is very simple. STEP 1: Press the component button where all the learned commands are stored and the ENTER button at the same time for 2 seconds until the component LED turns on. IMPORTANT: You have 30 seconds to perform the next step while you are in programming mode. If you do not press a button within 30 seconds, the component LED light will turn off. The remote will exit the programming mode and you will have to start over. STEP 2: Press and hold both the component button you want to erase and the PAUSE button at the same time for two seconds, until the component LED light blinks twice to confirm the erasure.
COMPONENT BUTTONS PAUSE
STEP 3: To exit Erase mode, press and hold both the component button and the [ENTER] button at the same time until the component LED light blinks three times.
Erasing MacroPower & Other Macro Commands STEP 1: To erase MacroPower commands on the POWER ON or SYSTEM OFF button, press and hold either the POWER ON or SYSTEM OFF button and the MUTE button simultaneously for two seconds until the current status component LED turns on. IMPORTANT: If you dont proceed to the next step within 30 seconds, the LED will turn off and exit set-up mode and you will need to start over. STEP 2: Press the CHANNEL UP button to erase and exit Erase mode. The component LED light will blink three times to confirm the erasure.
POWER ON SYSTEM OFF
NOTE: To erase other Macros, simply press the appropriate button in Step 1 in combination with the MUTE button.
Erasing SimpleSound & Other Punch Through Commands STEP 1: Press and hold the Component button you want to erase volume control from, such as DVD or VCR and the SELECT [SEL] button at the same time for two seconds until the Component LED light turns on. STEP 2: Press the VOLUME UP button and the same component button from Step 1. The component LED light will blink three times to confirm the erasure.
Repeat Steps 1--2 to erase SimpleSound commands from other components. NOTE: To erase other Punch Through commands, simply press the following buttons in place of VOLUME UP in Step 2: For Channel Control, press: CHANNEL UP For Transport Control, press: PLAY For OSD Control, press: MENU
Factory Reset You can reset your AVEX R6 remote to the original factory default settings. Press and hold both the TV and RECORD buttons for about five seconds until the DVR/VCR component LED light blinks five times. All programming and set-up codes that you have entered into the remote will be erased and the AVEX R6 will return to the original factory default settings. Warning This procedure will erase all programming and set-up codes that you have entered into the remote.
Finding a Components Set-up Code Number
If you used the Auto--Search or Learning Methods to program a component, you may not know the code number you programmed. Here is a way for you to identify what that code number is, so you can make a note in the back of this Manual for future reference. STEP 1: Press the component button you would like to verify and the SELECT [SEL] button at the same time for 2 seconds until the selected component LED light turns on. IMPORTANT: You have 30 seconds to perform the next step while you are in programming mode. If you do not press a button within 30 seconds, the component LED light will turn off. The remote will exit the programming mode and you will have to start over.
STEP 2: Press the INFO button and count the number of times the Component LED light blinks. This number indicates the first digit of the code. Next it will pause for about one second and begin blinking again to indicate the number of the second digit. Then once again it will pause, then blink, to indicate the number of the third digit. Example: One blink, pause, eight blinks, pause, three blinks indicates code number 183. Note that ten (10) blinks represent the number 0.
Pre-Programmed Code Tables
The AVEX R6 Pre-Programmed code library is classified by category (TV, VCR, DVD, etc.). Within each category, the code numbers are listed in rows by brand (Sony, Panasonic, B & K, etc.). Some brands have more than one three-digit code. Circle the correct row and refer to it while you perform setup operations. CABLE/SAT Cable Set top boxes and satellite
32 33-34 35-38
TV DVR/VCR DVD AUDIO AUX
TVs, Plasmas, Projectors and Monitors VCRs, DVRs & Combo Units DVD Players and Recorders Amps, Preamps and A/V Receivers
iPod, Media PC, Gaming System, 39 Lighting Controls
Brand Code Numbers Brand Code Numbers
148 ABC ADELPHIA ADVANCED NEWHOUSE 001 ALTRIO 001 AMINO ARMSTONG 110 AT&T BROADBAND 110 AT&T IPTV 251 ATLANTIC BROADBAND BLUE RIDGE BRESNAN 110 BRIGHT HOUSE BUCKEYE COMM 110 CABLEVISION 108 CHARTER CISCO COGECO 110 COMCAST COMSAT 110 COX DIGITAL DIGEO 111 DIRECTOR 110 ENVIO 005 GCI 110 GENERAL INSTRUMENT INSIGHT 110 JERROLD MASSILLON 110 MEDIACOM 110 MIDCONTINENT 110 MOTOROLA MOXI NCTC 110 NEW WAVE 110 OAK 031 ONELINK 001 PACE PANASONIC 044 PHILIPS 085 PIONEER 105 RCN 110 RODGERS 001 SCIENTIFIC ATLANTA 251 SEREN 001 SERVICE ELECTRIC 110 SHAW 110 SIGECOM 001 SONY 108 STARCOM 004 SUSQUEHANNA TIME WARNER TORX 004 UNITED CABLE 004 VERIZON 110 VIDEOTRON 001 VISTA III MEDIA 110 WAVE BROADBAND 110 WEHCO VIDEO 110 WEGENER 250 WIDE OPEN WEST 001 SATELLITE Receivers CABLEVISION DIRECTV DISH ECHOSTAR EXPRESSVU GE GENERAL INSTRUMENT GOI HITACHI HTS HUGHES JVC LG MITSUBISHI NEXT LEVEL PANASONIC PHILIPS PROSCAN RADIOSHACK RCA SAMSUNG SONY STAR CHOICE TOSHIBA VOOM
ABEX ADMIRAL ADVENT ADVENTURA AIKO ALERON AKAI
FISHER FUJITSU FUNAI FUTURETECH GATEWAY GE
A MARK 112 AMERICA ACTION 043 AMPRO 073 AMSTRAD 052 ANAM 112 AOC APEX DIGITAL ASTAR 477 AUDIOVOX 076 BELCOR 116 BELL&HOWELL BRADFORD 043 BROCKWOOD 116 CANDLE CAPEHART 058 CELEBRITY 001 CENTURION 116 CETRONIC 043 CITIZEN 103 CLARION 043 CLASSIC 043 CLP CLASSIC 333 COLORTYME 116 CONCIERGE 073 CONCERTO 363 CONTEC 051 CORNEA 116 CRAIG CROSLEY 164 CROWN 043 CURTIS MATHES 363 CXC 043 DAEWOO DAYTRON 363 DELL 363 DIGITAL LIFESTYLE 528 DIGITAL PROJECTION 570 DIGITRON 258 DIMENSIA 333 DUKANE DUMONT DURABRAND 096 DWIN 257 DYNASTY 043 DYNEX 399 EIKI 187 ELECTROBAND 001 ELECTROHOME ELECTROGRAPH 466 ELEKTRA 072 ELEMENT 494 EMERSON 153 ENVISION 116 ESA 387
GEM 391 GIBRALTER GOLDSTAR GRUNPY HAIER 363 HALL MARK 363 HANNSPREE 381 HARLEY DAVIDSON 028 HARSPER 466 HARVARD 043 HAVERMY 081 HELLO KITTY 076 HIMITSU 043 HISENSE 419 HITACHI 072 HP 327 ILO INFINITY 164 INFOCUS INTEQ 073 INSIGNIA 454 JANEIL 002 JBL 164 JCB 001 JCPENNEY JENSEN 013 JVC KAWASHO KEC 043 KENWOOD KLEGG 466 KLOSS KREISEN 530 KTV KURAZAI 072 LG 112 LODGENET 072 LOEWE 164 LOGIK 072 LUXMAN 363 LXI 164 MAGNAVOX MAJESTIC MARANTZ MATSUI 164 MATSUSHITA 080 MAXENT 242 MEGATRON MEMOREX 363
Brand Code Numbers
TV/VCR Combos AMERICA ACTION DAEWOO EMERSON FUNAI GOLDSTAR HARLEY DAVIDSON HITACHI JCPENNEY LG LLOYD MAGNAVOX MEMOREX PANASONIC PHILIPS RADIO SHACK RCA SAMSUNG SEARS SONY SYLVANIA SYMPHONIC THOMAS ZENITH DVR Receivers HUGHES HUMAX PHILIPS REPLAY NETWORKS SONY TIVO TOSHIBA
AKAI ALLEGRO APEX DIGITAL BLAUPUNKT BROKSONIC CINEVISION COBY CYBERHOME DENON DURABRAND DVD 2000 EMERSON ENTERPRISE FISHER FUNAI GOLDSTAR GO VIDEO
GREENHILL 111 HARMAN KARDON HITACHI 101 HITEKER 087 ILO 268 INITIAL 111 INSIGNIA 143 JBL 084 JVC 012 KENWOOD 151 KISS 279 KLH 135 KRELL 104 LITEON LEXICON 148 LG MAGNAVOX MARANTZ MALATA 267 MERIDIAN 153 MINTEK MITSUBISHI 017 MYRYAD NAD 088 NAKAMICHI 103 NESA 111 ONKYO OPTIMUS 023 OPPO ORION 130 PANASONIC PHILIPS 344 PHILIPS MAGNAVOX PIONEER POLAROID 233 POLK AUDIO RIO 091 RJTECH 269 SAMSUNG 275 SANSUI 154 SANYO 147
SEARS 130 SENSORY SCIENCE 222 SHARP 094 SHINSONIC 033 SONIC BLUE 091 SONY SYLVANIA 143 SYMPHONIC 143 TATUNG 102 TEAC TECHNICS 138 TECHWOOD 088 THETA DIGITAL 023 TOSHIBA URBAN CONCEPTS 035 VENTURER 149 YAMAHA ZENITH DVD Recorders GO VIDEO CYBERHOME ILO KISS LITEON PANASONIC SENSORY SCIENCE SONY TOSHIBA TV/DVD Combos AKAI FUNAI INSIGNIA MAGNAVOX MINTEK SAMSUNG SYLVANIA SYMPHONIC TOSHIBA TV/DVD/VCR Combos MAGNAVOX PANASONIC SYLVANIA TOSHIBA
DVD/VCR Combos GO VIDEO 137 PANASONIC 150 PHILIPS 001 (VCR Functions for VCR 067) SAMSUNG SANSUI 154 SONY 145 TOSHIBA 141 ZENITH 091 (VCR Functions for VCR101)
REALISTIC ROTEL SAMSUNG SANSUI
AIWA AKAI 189 ARCAM B&K BOSE BOSTON ACOUSTICS 447 CARVER DENON ELAN 290 ESCIENT 451 FISHER HARMAN KARDON 318 HITACHI 020 INSIGNIA 589 INTEGRA JAMO 398 JVC 291 KENWOOD KLH 331 KOSS 573 LEXICON LINN MAGNAVOX MARANTZ MCINTOSH MITSUBISHI MYRYAD 077 NAD NAKAMICHI NEC 176 NIRO 343 NILES 403 ONKYO OPTIMUS 041 PANASONIC 292 PARASOUND PHILIPS PIONEER RCA 067 288
SANYO 214 SCOTT 019 SHARP SHERWOOD SONY 271 SOUNDESIGN 036 SUNFIRE 066 TEAC TECHNICS 262 TOSHIBA YAMAHA 274 ZENITH SATELLITE Radios DELPHI POLKAUDIO SIRIUS XM SATELLITE RADIO
iPod Controls APPLE / iPod BOSE GRIFFIN KENSINGTON TEN TECHNOLOGY MEDIA PC Controls DELL GATEWAY HP KEYSPAN SONY TOSHIBA WINBOOK
GAMING SYSTEM Controls MICROSOFT / XBOX SONY / PSLIGHTING Controls LITE-TOUCH LUTRON X-10 XANTECH
DIGITAL TO ANALOG CONVERTER Controls ARTEC 586 CASTI 587 CRAIG 588 GRIDLINK 592 INET ACCESS 589 INSIGNIA 567 LASONIC 592 MAGNAVOX 584 RCA 585 SANSONIC 592 TIVAX ZENITH 567 ZINWELL 591 593
Frequently Asked Questions
If the batteries run out, will I lose my settings? No. The AVEX R6 stores all of your settings in nonvolatile FLASH memory. You could remove the batteries for months, replace them at your convenience, and the AVEX R6 would still remember your settings. What is MacroPower? MacroPower is a very useful way to make a lot of things happen with one button push. For example, in most home theaters, to watch television, the user must turn on the TV, then turn on the Cable Box or the Satellite Receiver, then turn on the Surround Sound system for sound. Instead of pressing all of those buttons one at a time, MacroPower enables you to turn on all of these components, in the sequence you want, with one button push. For more information on why and how you should program MacroPower commands, refer to page 17 in this Manual. What if my remote control no longer works from a distance? Replace the batteries with new Alkaline batteries. Who can I contact for more answers? The Universal Remote Control technical support and customer service staff are ready to answer any questions you might have. E-Mail us at firstname.lastname@example.org Visit our website www.universalremote.com Call us at 1-800-901-0800 Monday - Friday, 9AM to 6PM (EST)
UNIVERSAL REMOTE CONTROL, INC. warrants this product against defects in material or workmanship for a period of one (1) year and as set forth below. Universal Remote Control will, at its sole option, repair the product using new or comparable rebuilt parts, or exchange the product for a comparable new or rebuilt product. This warranty does not apply to the following: Units purchased from unauthorized resellers. Units purchased second-hand (used). Units installed or deployed for rental or commercial use. Damage caused by misuse, neglect, or acts of nature. Products that have been modified or incorporated into other products. Products purchased more than 12 months ago.
Learning Capability IR frequencies (15kHz to 100kHz) Macro Capability 6 Macros of up to 20 steps each IR Range (Line of Sight via Infrared) 30--50 feet, depending on the environment Weight 6.9 oz. (with batteries) Size 2 1/8 x 1 1/8 x 8 3/4 Batteries Two AAA Alkaline batteries included
Information To The User
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help.
Full Size Studio Headphones
Professional Full-Size DJ Headphones
AUDIO/VIDEO A/V Accessories
Audio Technica. 41, 47 Behringer. 43 Earbuds. 44 Headphones. 41~44 Maxell. 43, 44 Phono Styli/Cartridges. 47,48 Pro Luxe. 43, 44
Professional studio reference headphones Semi-open design for enhanced ambient listening environment 50mm drivers for exceptional reproduction and wide dynamic range Self-adjusting headband Frequency response: 10Hz~30KHz Impedance: 32ohm 3.5mm to 14' adapter included Mfr. #SR850
Order # 35-3060 ONLY $59.00
Open-Ear Full Size Headphones
Samson's top-line model RH600 uses a highperformance driver with a 40mm diaphragm coupled with a neodymium magnet and sophisticated circuitry, providing reference quality audio. Its open-ear design with acoustic mesh fabric ensures clear sound and extreme comfort. Features: 40mm diaphragm drivers Frequency response: 20Hz~22KHz Sensitivity: 115dB at 1KHz 3.5mm to 14" adapter included 10' cord Mfr. #RH600
Order # 35-3045 ONLY $59.00
The SRH750DJ Headphones from Shure deliver world-class audio performance, comfort, and durability to professional DJs. Comfortable, padded ear cups swivel 90 and allow easy placement on one ear when mixing. Replaceable cable and included set of replacement ear pads ensure a long-lasting lifetime of use. Features: Closed-back design rests comfortably over the ears and reduces background noise Replaceable ear cup pads ensure long product life Includes: 10' detachable coiled cable, carrying bag, threaded 14" adapter, and a set of replacement ear cup pads Mfr. #SRH750DJ
Order # 35-2830 ONLY $149.99
RCA. 45 Remote Controls. 45, 46 Samson. 41 Shure. 41, 47 Sony. 42 Stellar Labs. 42, 44 Uni-Tone. 43, 44
QuietPoint Active Noise Canceling Headphones
Audio Technica's ATH-ANC7B QuietPoint closed-back headphones deliver clear, highresolution sound with impactful bass, detailed midrange, extended treble and accurate imaging in an immersive sound field. Features: 40mm driver Frequency response: 10Hz~25KHz 3' or 5' detachable cord with 3.5mm plug Includes: " adapter, airline adapter, AAA battery, and carrying case
Order # 35-2102 ONLY $199.99
Professional Studio Headphones
Closed-Back Studio Headphones
CH700 headphones are ideal for any listening and monitor application where critical sound reproduction is needed. Features: Lightweight,closed ear design with adjustable headband 40mm mylar drivers Frequency response: 20Hz~22KHz Impedance: 64ohm Includes 3.5mm to 1 4" adapter Mfr. #CH700
Order # 35-3055 ONLY $49.00
The SRH440 Professional Studio Headphones from Shure provide exceptional sound reproduction and comfort. Optimized for home and studio recording, these headphones reproduce accurate audio across an extended range. Features: Frequency response: 10Hz~22KHz 10' cord Includes: Carrying bag and threaded 14" adapter
Order # 35-2825 ONLY $99.99
QuietPoint Active Noise Cancelling Headphones
Professional DJ Headphones
The SRH240 headphones from Shure provide excellent sound reproduction and comfort. Features: 40mm neodymium dynamic drivers optimized for general listening and monitoring Optimized to reproduce deep bass with clear mids and highs 6' cord Includes 14" adapter Frequency response: 20Hz~20KHz
Order # 35-2820 ONLY $59.99
The ATH-ANC27 from Audio Technica deliver exceptional sound quality with powerful bass, a natural midrange, detailed treble and precise imaging in an immersive soundfield. Features: On/off switch in ear cup Audio continues to work even after battery depletes Detachable cable for cordless noise cancellation Includes: Hard-shell travel case, " adapter, airline adapter and AAA battery
Order # 35-2110 ONLY $99.99
The RH100 headphones from Samson use a newly designed high performance transducer along with a neodymium magnet and advanced headphone circuitry. Engineered for comfortable listening over extended periods of time, the RH100s sound great in any kind of studio or home music playback situation. Features: 40mm diaphragm drivers Frequency response: 20Hz~22KHz Sensitivity: 106dB at 1KHz 10' cord, 3.5mm to 14" adapter included Mfr. #RH100
Order # 35-3040 ONLY $39.00
The ATH-ANC25 headphones block up to 80% of environmental noise and offer outstanding sound quality, comfort and portability. Features: Audio continues to work even after battery depletes Detachable cable for cordless noise cancellation Includes: Travel pouch, airline adapter and AAA battery
Order # 35-2115
Lightweight Closed-Back Studio Headphones
Lightweight design Adjustable headband 40mm mylar drivers Frequency response: 20Hz~22KHz Impedance: 32ohm Sensitivity: 106dB at 1KHz Includes 3.5mm to 1 4" adapter Mfr. #CH70
Order # 35-3050 ONLY $39.00
900MHz RF Wireless Headphones Studio Monitor Series DJ Headphones
Monitoring headphones for DJ and remix use Swivel earcup allows easy single sided monitoring on shoulders 50mm driver unit for high quality sound Neodymium magnet for powerful bass response Resists high power input up to 3000mW Sleek metallic finish Compact foldable design Coiled cord Impedance: 24ohm Frequency response: 5Hz~30KHz Sensitivity: 107db/ mW Cord length: 9.8' Weight: 10.6 oz. Goldplated UniMatch plug
Order # MDR-V700DJ (1-3) $132.00 (4-up) $125.00
RF wireless headphone system 30mm driver unit for high-quality sound Lightweight open-air type headphone Automatic on/off headphone function FM transmission system Channel selection for tuning on headphone (3 channels) Auto charge feature when headphones are on base Free adjusting headband for precise and comfortable fit Up to 28 hours of battery life Included NiMH battery Volume control on headphones Up to 150' transmission range Easy connection to home audio system, TV or VCR
Order # MDR-RF920RK (1-9) $78.99 (10-up) $74.69
Noise Canceling Headphones
Reduce ambient noise and provide a quieter environment to enhance audio entertainment in noisy environments Ambient sound is synthesized with an anti-sound signal produced by the noise canceling circuit and reduced (over 10dB is reduced at 300Hz) Slim swivel folding style for easy storage Neodymium magnets deliver powerful sound Operate as passive headphones when noise canceling circuit is not activated Includes a carry pouch and a plug adaptor to connect directly to stereo or dual jack of in-flight music services. Specifications: Type: Open air, dynamic Driver unit: 38mm diameter, dome type Frequency response: 30~15,000Hz Noise reduction: 40~1,500Hz Impedance: Power on 20ohm at 1KHz
Order # MDR-NC6 (1-3) $46.49 (4-up) $43.38
Studio Monitor Stereo Headphones
Enjoy long-lasting comfort, stylish design and deep base audio for a great listening experience. Features: 40mm driver unit, long stroke Ear conscious design for pleasant wear-ability and extended listening comfort Single sided cord Unimatch plug Comfortable earpads 3.5m cord length Specifications: Type: Closed, dynamic Sensitivity: 100dB/mW Frequency response: 12~22,000Hz Impedance: 70ohm at 1KHz
Order # MDR-XD100 ONLY $21.49
Infrared Wireless Stereo Headphone System
Get ready to rock with Sonys wireless headphone system. Features: Complete kit including transmitter and headphones Lightweight, open-air design30mm drive units for deep base Up to 60 hours of battery life with with an optional alkaline battery, or up to 35 hours of battery life with the supplied NiHM rechargeable battery Transmission range up to 24' Battery is automatically charged by placing headphones on the cradle Transmission coverage angle up to 90 Easy connection to home audio system, TV or VCR
Order # MDR-IF240RK (1-3) $57.99 (4-up) $53.48
Closed, supraaural design Neodymium magnet for powerful bass sound Reversible earcups for single sided monitoring Sleek silver metallic finish 30mm driver unit Compact foldable design Oxygen-free copper cord Impedance: 24ohm Sensitivity: 100db/mW Cord length: 9.8' Weight: 4.1 oz. Goldplated UniMatch plug
Order # MDR-V300 ONLY $43.49
30mm driver for high-quality sound Reversible earcups for single sided monitoring Volume control on cord Goldplated stereo Unimatch plug Specifications: Type: Closed supraaural, dynamic Frequency response: 18Hz~22KHz Sensitivity: 98dB/mW Impedance: 24ohm Cord length: 6'6" Weight: 4.2 oz. without cord
Order # MDR-V250V (1-3) $30.49 (4-up) $29.24
Full Size Stereo Headphones with Volume Control
Rugged full size headphones feature large 40mm diaphragms, for excellent sound quality, and beefed up construction for durability. They are ideally suited for education use. Smooth fluid rotary controls are located in each ear cup allowing independent left/right volume adjustment. Heavy-duty 6' single entry cord stays out of the way, and is terminated with a right angle 3.5mm plug. Soft padded ear cushions ensure snug comfortable fit. Specifications: Frequency response: 20Hz~20KHz Impedance: 32ohm Sensitivity: 105dB Display packaged for resale
Order # 35-2225 MSRP $19.95 (1-3) $12.49 (4-11) $10.80
Folding design; reversible earcups for single-side monitoring 40mm driver for deeper bass response Aura-Nomic driver design faces eardrum for enhanced sound CircumAural earcup design Powerful neodymium magnets Case supplied Gold plated UniMatch plug
Order # MDR-V600 (1-3) $109.00 (4-up) $107.00
Full Size Lightweight Stereo Headphones
Full size headphones feature large 40mm diaphragms, for excellent sound quality. Featherweight design and specially contoured ear cushions ensure long term comfort. These headphones are the choice when optimum sound quality is needed for long term use. Specifications: Frequency response: 20Hz~20KHz Impedance: 32ohm Sensitivity: 105dB Display packaged for resale
Order # 35-2230 MSRP $19.95 (1-3) $11.49 (4-11) $10.19
Follow us on:
Closed Type High Definition DJ Headphones
As a DJ, you want your headphones to deliver a wide frequency response and high dynamic range. The HPX4000 headphones give you incredible performance for a price well within any budget. Features: Ultra-wide frequency range (20Hz~20KHz) High-definition bass and supertransparent highs Ultra-high dynamic range Highefficiency cobalt capsule Single-sided coiled cord with oxygen-free copper wires Round swiveling ear cups Ultra-rugged headband construction
Order # 35-2630 ONLY $33.99
Noise Cancelling Headphones
Heavy-Duty Digital Hi Fi Stereo Headphones
These professional quality headphones are value priced and deliver great sound 40mm super thin diaphragm drive units 32ohm Frequency response: 20Hz~20KHz 9' straight cord Gold plated 3.5mm stereo phone plug Gold plated 3.5mm to 14" adapter included Display packaged for resale
Order # 35-445 MSRP $24.95 (1-3) $20.49 (4-9) $16.95 (10-up) $14.68
NEW! The flagship of the Maxell headphone lineup, these noise cancelling headphones deliver excellent sound quality, while eliminating background noises, allowing you uninterrupted audio enjoyment. Features: Eliminate 95% of background noise Fold flat ear cups 34mm drivers Three position volume control Frequency response: 10Hz~22KHz 3' single entry, detachable cord Includes: Airplane adapter, padded carrying case, " adapter, and 6' extension cord Requires two AA batteries (not included) Mfr. #NC-IV
Order # 35-2990 ONLY $85.99
High Definition DJ Headphones
With the HPX2000 headphones, you get truly exceptional sound reproduction at an incredibly affordable price. Features: Ultrawide frequency response (20Hz~20KHz) Highdefinition bass and super-transparent highs Ultra-high dynamic range High-efficiency cobalt capsule 3.5mm connector plus 14" adapter included Single-sided cord Rotating, reversible round-shaped ear cups Ultrarugged headband construction
Order # 35-2635 ONLY $21.99
Great for schools or amateur projects, these headphones are switchable stereo/mono with an independent volume control Adjustable headband and highly cushioned earpads 40mm super thin diaphragm drive units 32ohm Frequency response: 20Hz~18KHz Sensitivity: 105dB SPL at 1KHz 2% 3.5mm to 14" adapter included Display packaged for resale
Order # 35-455 MSRP $12.95 (1-3) $10.99 (4-9) $9.63 (10-up) $8.37
These ultra portable noise cancelling headphones deliver excellent sound quality, while eliminating background noises, allowing you uninterrupted audio enjoyment. Features: Eliminate 95% of background noise Collapsible design 30mm drivers Frequency response: 14Hz~24KHz 6' single entry cord Includes: Airplane adapter, travel pouch Requires two AAA batteries (not included) Mfr. #NC-II
Order # 35-2991
Foldable Noise Cancelling Headphones Full Size Stereo Headphones
40mm diaphragms deliver full rich sound expected from models at three times the cost. Straight 9' cord has 3.5mm plug and includes 3.5mm to 14" adapter. Product is display boxed and is perfect for resale. Specifications: Frequency response 20Hz~18KHz SPL 105dB at 1KHz Impedance 32ohm
Order # 35-972 ONLY $9.18
High Performance Studio Headphones
Whether youre mixing a recording, monitoring a bass line or just enjoying an mp3, you want your headphones to deliver a wide frequency response and high dynamic range. The HPS3000 headphones provide incredible performance for a price well within any budget. Features: Ultra-wide frequency response (20Hz~20KHz) High-definition bass and supertransparent highs Ultra-wide dynamic range Highefficiency cobalt capsule 3.5mm connector plus 14" adapter included Single-sided cord Optimized ovalshaped ear cups Ultra-rugged headband construction
Order # 35-2640 ONLY $21.99
Ideal for when traveling, at the office, or enjoying music at home, these noise cancelling headphones from Maxell provide maximum comfort and excellent sound quality. Features: Eliminate up to 95% of background noises In-line volume control High-quality 40mm drivers with neodymium magnets 6' cord Frequency response: 20Hz~22KHz Includes: Airplane adapter and travel pouch Requires two AAA batteries (not included) Mfr. #NC-III
Order # 35-2992
Mini Stereo/Mono Headphones
Designed for television use, these headphones are also perfect in security, educational and communications applications. Attached 15' cord allows plenty of room between the wearer and the set. Inline volume control also has stereo/mono switch, allowing compatibility with either type of output. 34mm diaphragms provide rich, full audio. Cord is terminated with a 3.5mm nickelplated stereo plug, 3.5mm stereo/mono adapter is also included. Product is display carded and is perfect for resale, call for larger quantity pricing. Specifications: Frequency response 20Hz~20KHz SPL 102dB at 1KHz Impedance 32ohm
Order # 35-1065 (1-3) $8.57 (4-9) $8.14 (10-up) $7.35
B A Pink cap
Stereo Ear Buds
Couleur Series Ear Buds
Styled to look like everyones favorite miniature candy, these M&Ms style lightweight ear buds are designed for comfort and extended use. Features: Soft cushion ear tips Color matching cords and plugs Perfect for kids and adults 4' cord length Frequency response: 16Hz~24KHz
Order # 35-2950 35-2951 35-2952 35-2953 35-2954 35-2955 Color Pink Blue Green Red Orange White
Kids Safe Volume Regulating Headphones
Manufactured with an aluminum cavity that provides clear and bright sound, these ear buds from Maxell provide style and excellent sound quality. Features: Soft silicone ear tips, three different sizes included 4' cord
Fig. A B C D Order # 35-2970 35-2971 35-2972 35-2973 Color Pink/green Silver/blue Blue/purple Purple/orange ONLY $17.99 17.99 17.99 17.99
ONLY $8.88 8.88 8.88 8.88 8.88 8.88
These comfortable headphones feature a specially designed volume regulating circuit that limits output levels, regardless of how high the volume is turned up. Also perfect when connected to sources where volume level can vary widely. Features: Interchangeable color caps 4' cord Durable construction
Fig. Order # A 35-2956 B 35-2960 C 35-2961 Description M&Ms style Earclip style Open-air headphones
Compact Lightweight Headphones
Ideal for use with any portable A/V device, these compact headphones feature large 30mm diaphragms for full-size headphone quality sound. 4' cord is terminated with a standard 3.5mm right angle plug. Specifications: Frequency response: 20Hz~20KHz Impedance: 32ohm Sensitivity: 96dB Display packaged for resale
Order # 35-2220 MSRP $7.99 ONLY $5.44
ONLY $13.49 11.49 11.49
Jelleez Stereo Ear Buds
Replacement Stereo Headphones
High quality, low cost units are ideal as replacements for lost or broken headphones used with portable MP3 and CD players. 27mm diaphragms provide 20Hz~20KHz response. 4' cable is terminated with a 3.5mm stereo plug. Specifications: SPL: 88dB at 1KHz Impedance: 32ohm
Order # 35-1415 (13) $3.12 (49) $2.82 (10up) $2.60
These stylish ear buds from Maxell offer exceptional comfort at an excellent price. Features: 3' highly flexible cord Highquality 13mm drivers with neodymium magnet Frequency response: 20Hz~22KHz
Order # 35-2965 35-2966 35-2967 35-2969 Color Blue Purple Black Pink ONLY $7.97 7.97 7.97 7.97
Perfect for personal stereo or multimedia applications. Attached 5' cord enters from only one side, instead of both, making it much easier to keep out of the way and untangled. Wide, adjustable headband provides comfort while holding unit securely in place. 30mm diaphragms provide frequency response expected of models of over twice the price. The cord is terminated with a standard 3.5mm plug, and 14" adapter is included. Specifications: Frequency response: 20Hz~18KHz Impedance: 32ohm Sensitivity: 118dB Display packaged for resale
Order # 35-1135 (1-3) $7.46 (4-9) $6.90 (10-up) $6.51
Comfortable open-air design with wide headband Large diameter driver units 30mm (1316") XBS port increases bass response Frequency response 16Hz~22KHz
Order # P-RP-HT21 ONLY $4.64
Compact Stereo Ear Buds
Ideal for use with any portable A/V device, the white color and compact design make these ideal replacements for iPods and similar items. Set includes three pairs of soft silicon cushions, ensuring secure and comfortable fit. 10mm drivers produce very good sound quality from any sound source and 4' cord is terminated with a standard 3.5mm plug. Specifications: Impedance: 16ohm Sensitivity: 93dB Display packaged for resale
Order # 35-2210 MSRP $9.95 (1-3) $6.96 (4-11) $6.11
Economical replacement headphones for most personal stereos and portable CD players. 27mm mylar speakers 32ohm Maximum input level: 10mW 4' straight cord 3.5mm stereo plug
Order # MSRP 35-460 $4.95 (13) $3.12 (49) (1099) $2.93 $2.71
This is the exact same headphone seen with other brand names, only for half the price. 27mm diaphragm provides 20Hz~18KHz frequency response, outstanding performance for the dollar! Attractive retail package, and low quantity price makes this a great resale or promotional item. The attached 4' cord is terminated with a standard 3.5mm plug. Specifications: Impedance: 32ohm Sensitivity: 101dB
Order # 35-1145 ONLY $4.03
Stereo Ear-Bud Headphones
Large diameter driver units 14.8mm (916") Neodymium rare-earth magnet for rich and powerful sound XBS port increases bass response Frequency response 10Hz~25KHz
Order # P-RP-HV152 ONLY $4.64
3.5mm miniature plug Commonly used with portable radios, televisions, scanners and other audio devices 6' cord length
Order # 28-005 ONLY $2.51
Mono earphone designed to fit into the ear. It is held firmly in place by a band which clips over the ear. Supplied with a 1m lead and a 3.5mm mono plug. Impedance: 32ohm Frequency response: 50~18KHz Order # (1-4) (5-up) Total weight: 22g AV00225 $4.94 $4.07
Ready-to-Use TV Remotes For All Major Brands
Need a remote to replace the original remote that came with your TV, but hate the thought of spending $20, $30 or even $40? Fed up with those complicated, expensive, programmable remotes with functions youll never use? Looking for a simple, basic remote to operate your TV? MCM has the total solution with these incredibly affordable remotes. Features: Ready to use, no programming needed, just point and click Sleek silver finish, small and easy to handle Designed to work with televisions manufactured after 1990 Inexpensive solution to lost remotes Manufactured to the highest quality standards Requires two AAA batteries, MCM #292-025, (not included)
Order # 80-7085 (1-9) $515.00 (10-up) $490.00
TV Only Universal NEW! Hospitality Remote
No menu button No setup required for LG/Zenith, Philips, RCA, Panasonic, and Vizio TVs Can be programmed to work over 250 brands Compatible with flat screen and HDTVs
Order # 80-7585 (1-9) $6.05 (10-up) $5.30
Harmony 650 Universal Remote
A color screen universal remote that brings you showtime in no time. Features: Color display with icons for your favorite channels One-touch activity-based control Multi-device control Replaces five remotes Guided online setup and live support
Order # 80-7560 ONLY $109.00
Antibacterial NEW! Clean Remote
The Clean Remote has tested to be 99% cleaner than standard remotes. In several studies, TV remotes have been revealed to be a leading carrier of bacteria in a patients room. With many cracks and crevices, they are nearly impossible to properly disinfect. The Clean Remote has a flat non-porous surface that makes it simple to clean and disinfect. Features: Simple one touch set-up (no codes needed) For TV only (will not work TV/ DVD, VCR or DVD/VCR combination units) Works over 250 brands of commercial and retail TVs No menu button - So patients and guests cannot change settings Hidden battery compartment and attached door to help prevent batteries from being taken
Order # 80-7580 (1-9) $13.49 (10-up) $11.97
R50 LCD Universal Remote Control
The R50 controls up to 18 components. It features a large, color LCD screen and provides a Set-up Wizard right on the remote for quick and easy configuration (simply answer a few questions). And it has thousands of built-in control codes to assure full control of your components. 1,500 macro buttons (up to 255 steps each) 32Mb (non-volatile flash memory) IR (infrared) range of 30'~50' (approximate range will vary depending upon operational and environmental conditions) Uses only four AA batteries
Order # 80-7055 (1-9) $90.99 (10-up) $88.43
SR3 Three Device Universal Remote Control
4Learning function 43 Device
Large Button Universal Remote Control
Control your TV and cable box from the couch with this easy-to-use remote control. Works with most major brands. Features: Large buttons for easy operation and ergonomic design 3-minute memory backup
Order # RM-EZ4 (1-9) $10.49 (10-up) $9.08
The SR3 is a lightweight and comfortable remote, designed for one-hand operation. Large, easy-to-read numbers make it easy to find and press the right keys. With the four Favorite Buttons you can program the channels you watch the most for easy access. The SR3 has thousands of preprogrammed codes for quick and easy setup. SimpleSound gives you total volume control over all the components in a system, even those without their own built-in volume control, such as TiVo, DVD and VCR
Order # 80-7700 (1-9) $14.49 (10-up) $12.68
RF 20 Universal Remote
The RF20 is a ten device universal RF/IR remote. This remote includes comfortable navigation via a combination of wearresistant buttons and five-way thumb pad for operation of menu-driven devices. The RF-20 has over 1,000 built-in codes for easy programming of products from all major brands. Four AA batteries required (included).
Order # 80-7060 (1-9) $50.49 (10-up) $48.03
Universal Remote RF20/MRF100B Bundle
This bundle starts with the RF20 ten device universal RF/IR remote. This remote includes comfortable navigation via a combination of wearresistant buttons and fiveway thumb pad for operation of menu-driven devices. The RF-20 has over 1,000 built-in codes for easy programming of products from all major brands. Four AA batteries required (included). This bundle also includes the MRF100 Blaster which allows RF control of up to six devices from anywhere within 100' range through walls/floors. Includes six mini IR flashers.
R6 Six Device Universal Remote Control
The URC R6 AVEX pre-programmed and learning remote control sends IR (infrared) commands to all home theater A/V equipment and can replace up to six different remote controls. With MacroPower, you can program the R6 to turn up to six components ON or OFF with the press of one button. Two AA batteries required (included).
Order # 80-7070
R7 Seven Device Universal Remote Control
The URC R7 pre-programmed and learning remote control sends IR (infrared) commands to all home theater A/V equipment and can replace up to seven different remote controls. With MacroPower, you can program the R7 to turn up to seven components ON or OFF with the press of one button. Two AA batteries required (included).
80-7065 (1-9) $25.49 (10-up) $23.79
A B C D E
N (1-9) (10-up) $3.02 $2.81 8.27 3.02 7.40 2.81
Fig. Order # Type Mfr. # Comments A 40-020 Astatic N50, N60, N62, N68, N70 Cartridge 133, 137, 138, 140, 142, 146, 148, 192, 233, 237, 459, 483, 485, 496, 497, 610, 612, 614, 616, 667 series B 40-040 Astatic NS Cartridge 163, 177, 195, 669 series; also replaces single tip version C 40-060 Astatic N7-7, N7-8 Cartridge 70, 74, 76, 78, 80, 86, 118, 120, 124, 310-7, 320, 322, 324, 350, 434, 472, 474, 603, 631-639, 643, 654, 661 series D 40-100 BSR ST8, ST9, ST10 Cartridge X1H, X1HE, X2HE, X3H, X4H,X5H, X5M, SX1H, SX2H, SX5H, SX5M, SC5H E 40-120 BSR ST12, ST15, Cartridge SC5M, X5M, ST19 F 40-140 BSR ST16, 17, 19 Cartridge SC-7M1, 2, 3, 4, SL-8M1, 2, 3, 4 40-060 BSR TC8R,TC8RS Cartridge TC8H, TC8S series C B 40-040 Magnavox 560350-1, 2, 560355-1, 2 Cartridge EPC-27 series EPC 70 C 40-060 Ronette 5304 Cartridge DT, NE, RA, TO G 40-280 Tetrad 50, 60 series; A, B, C series Except 52D, 64S, A2S, BOD 40-300 Tetrad 10, 30, 70, 80, 90 series Except 11S, 3LD, 74D H J 40-320 Tetrad 20, 40 series E, 6 series Except 22D, 41S C 40-060 Varco TO-L, ST-40, SS-L, NBS-12, 13, 14 Cartridge SN, TO, ST series except SN-45, TO-55, ST-4x K 40-380 Varco TN-4, NTO-7, 10 Cartridge TN-4 series L 40-400 Zenith S-66566-7 Cartridge 142-151; 142-163, 6, 7 M 40-1468 Ortofon N15E Cartridge F15E N 40-1490 RCA 131780 Cartridgge 131779, 132069 P 40-1498 Audio Technica ATS-13S Cartridge AT-13 Q 40-1510 Pickering D3407, S3407 R 40-1516 Fisher ST-29D MG-29D R 40-1516 Sanyo ST-29D MG-29D R 40-1516 Toshiba N-50 C-50 S 40-1534 Astatic 91T Also replaces 91T, 698,76,AC260, 76S, E37, E713SS, P-15, 490, W202-TPS S 40-1534 EV 76 Also replaces 91T, 698, 76, AC260, 76S, E37, E713SS, P-15, 490, W202-TPS S 40-1534 Webster V8-2 Also replaces 91T, 698, 76, AC260, 76S, E37, E713SS, P-15, 490, W202-TPS S 40-1534 Webcor A1919 Also replaces 91T, 698, 76, AC260, 76S, E37, E713SS, P-15, 490, W202-TPS
3.63 3.44 4.03 3.84 5.14 4.22 3.02 2.81 8.27 7.40 3.02 2.81 5.04 4.73 4.64 4.31 5.86 5.48 3.02 2.81 9.69 7.82 9.28 8.23 18.99 17.04 4.64 4.27 14.99 14.23 9.69 9.00 9.69 9.00 9.69 9.00 9.69 9.00 9.48 8.70 9.48 8.70 9.48 8.70 9.48 8.70
Stylus Stylus Frequency Tracking MountingChannel Order # Model # Color Type Response Grams Type Separation (1-9) (10-up) 1 39-400 CN5625AL Red Spherical diamond 20~20KHz 1.5~2.5 2" 1 KHz = 25dB $25.49 $22.95 10KHz = 15dB 39-460 AT3482P Black Conical diamond 20~20KHz 2~3 P 1KHz = 20dB 22.49 21.68 (Same cartridge used by many OEMs in rack systems) 10KHz = 17dB 1 39-500 AT440ML/OCCViolet Nude square 5~32KHz.8~1.6 2" 1 KHz = 30dB 183.00 178.50 micro-linear diamond 1.25 optimal 10KHz =
Replacement Order # Type Mfr # Styli (1-9) (10-up) 40-1542 Vaco TN-4AD 40-380 $11.49 $10.29
DJ Grade Magnetic Phono Cartridge
Order # 39-530 39-535 Description Phono cartridge Replacement stylus
Ideal for all purpose DJ use, the SC35C from Shure provides significant skip resistance, and mounts on a standard " tone arm mount. Includes: Cleaning brush, extra set of headshell wires, headshell weight, mounting hardware and stylus guard
ONLY $49.00 26.00
High Performance Magnetic Phono Cartridge
Magnetic Phono Cartridge
Designed to fit on a standard " tone arm mount, this cartridge is able to accurately reproduce very difficult musical passages, particularly in the high-frequency range, where audio modulations are the smallest and most concentrated, and stylus tip movement is consequently the most rapid. Includes: Cleaning brush, headshell screwdriver, mounting hardware, and stylus guard Mfr. #M97XE
Order # 39-510 39-515 Description Phono cartridge Replacement stylus ONLY $89.00 55.00
Fits both of the major types of tonearm mounts in use today, making it compatible with over 85% of turntables. Features: Accurately traces the grooves of your records for smooth sound throughout the frequency range Universal mount Biradial diamond tip Tubular aluminum alloy stylus cantilever Standard mount adapter Mounting hardware Stylus guard Low tracking force Minimizes wear on your irreplaceable vinyl collection Mfr. #M92E
Order # 39-520 39-525 Description Phono cartridge Replacement stylus ONLY $29.58 15.58
Fig. Order # Type Mfr. # Comments A 40-430 ADC ADC K8 Diamond A 40-440 ADC ADC K8E Elliptical diamond B 40-1110 ADC RLM-1/3 Used in ADC/BSR, Accutrax A 40-700 ADC RSQ-34 Used in cartridge #QLM34/MK111, diamond C 40-1105 ADC RXS5 Used in SX5 and SX5E C 40-1105 ADC RXS5E AN-50 C 40-1215 Aiwa D 40-1120 Audio-Technica ATN-12D7 Used in AT12XE Used in AT766 E 40-1210 Audio-Technica ATN250 F 40-1215 Audio-Technica ATN3830 Used by AT3830 & 3831 Used in AT-71E, Aiwa-AN71, G 40-1125 Audio-Technica ATN-71EB Denon, Kenwood Used in AT-11E, Akai Dual, H 40-1115 Audio-Technica ATS-11E EV, JVC, etc. Replaces Sansui #SN-40, J 40-1080 Audio-Technica ATS10 Sanyo #ST-35VD, diamond Replaces Sony #ND138G K 40-715 Audio-Technica AT3400 diamond L 40-720 Audio-Technica AT3600, Replaces Yamaha #N-770, T3600L, Sharp #STY123,24, T3601 diamond L 40-1100 Audio-Technica AT3600 Replaces JVC #DT-55, Sony #ND-142G, Marantz #DN-61, Pioneer #PN-230, Sharp #STY123/124, Yamaha #N-7700, diamond M 40-1345 Brother BF-26 M 40-1345 Chuo Denshi 6-2070 Used in CZ-680 M 40-1345 Chuo Denshi 6-2098 M 40-1345 Denon DSN45 Used in JC-24 N 40-520 Empire 66X Diamond P 40-1150 Empire S100 Used in Empire 100S-200, 300, 400, etc. S-66/X-ERD Used in 66-X, EX, PEX, Q 40-1145 Empire 906HME/X R 40-1165 Pickering D-IV-AT Used in pickering phase IV, Micro IV, V-15 - 40-1170 Pickering DLC Used in pckering TLC Plug In S 40-1190 Pioneer PN-135 Used in PC-135 S 40-1190 Pioneer PN-155 T 40-1325 RCA 78827 C 40-1215 Sanyo ST103 Used by many other manufacturers X 40-1220 Sanyo ST140 Also used by many other manufacturers F 40-1210 Sanyo ST-41D Used in MG-41D (1-9) (10-up) $9.38 $9.10 10.99 9.10 10.49 9.23 11.99 10.83 9.99 8.90 9.99 8.90 8.47 7.55 9.48 8.70 12.99 11.65 8.47 7.55 14.99 14.08 12.99 11.74 7.67 7.17
20.39 18.31 19.39 18.62 8.07 7.51
4.75 4.75 4.75 4.75 9.48 8.47
4.29 4.29 4.29 4.29 8.65 7.55
20.99 19.06 8.47 8.47 9.28 9.28 3.22 8.47 4.75 7.55 7.55 8.33 8.33 2.60 7.55 4.29
Fig. Order # Type Mfr. # Comments F 40-1210 Sanyo ST-412D M 40-1345 Sanyo ST-6G Used in RS-07260 Y 40-1010 Sanyo/Fisher ST-07 Diamond Z 40-1050 Sanyo/Fisher ST-14 Also replaces Kenwood #N-67, Marantz #TT-151, Sansui #SN-P212, diamond AA 40-1040 Sanyo/Fisher ST-67 Diamond Also replaces BB 40-840 Sanyo/Fisher ST-38D Audio-Technica #AT892 Moving magnet, diamond CC 40-1045 Sanyo/Fisher ST-G9 Toshiba #ST-G10 N-45, N-77, Sharp STY-143, Aiwa N-Used in 89381 M 40-1345 Sears D 40-1215 Sharp STY124 Denon DSN-63 N21D Used in M7-N21D, M3, DD 40-1240 Shure M7, M8 series N3D DD 40-1240 Shure DD 40-1240 Shure N7D N75E EE 40-1225 Shure N75EJ Used in M75EJ type II EE 40-1225 Shure DD 40-1240 Shure N8D FF 40-1230 Shure N95 Used in Shure M95 FF 40-1230 Shure N95D - 40-1245 Shure SS35C Used in SS35C - 40-1235 Shure VN35E Used in Shure V15 type III S 40-1235 Shure VN35D Raise or lower conical version of VN35E GG 40-560 Shure N-44 Diamond HH 40-860 Shure N-70B Diamond HH 40-865 Shure N-70EJ Diamond JJ 40-580 Shure N-91 Diamond T 40-1325 Sonotone 2TS-N5T-7T Used in Sonotone 2T, 5T, 7T, T 40-1325 Sonotone KK 40-1320 Sonotone MS Used in 51I, 52T, 54T, 60T, 61T, 65T, 66T KK 40-1320 Sonotone MS77 KK 40-1320 Sonotone MSD LL 40-1335 Sonotone N16T LL 40-1335 Sonotone N18T-S77 T 40-1325 Sonotone N2T-S MM 40-1255 Sony ND127D MM 40-1255 Sony ND127P Used in Sony VX23P NN 40-1280 Sony ND133G Used in VL-300 PP 40-1250 Stanton D71E Used in L717E - 40-1320 Toshiba Used in Y590 B 40-1110 Toshiba N36C Used in C-36, ADC RML-LL38 linear, Aiwa-AN-F10 denon M 40-1345 Toshiba N-40 QQ 40-1295 Zenith S-82621 Used in 142-167, Mag., Mar Pana., Sharp, etc. F 40-1210 Yamaha N-6800 Used in CQ-5600, Akai RS150, Hitachi
GX-200 KX-TG7200NL DSC-3270E User Manual MDX-E100 LXD75 HK 3380 Suunto T6D Easytrim DE400 DMV-UH1977 WD-1247RD Fraidy Cats Class 700 SCX-4824fnkg HK6800 BH-606 HF-33W WD-481TP KX-P2180 PCG-Z1XEP Series KDC-W410AY Maro2HT4405801E V4 1 KDL-32U2530 Experte VGN-B1VP Motorola V180 DB335 Cu-vd40 EP728 Pedals Alcatel-lucent 4049 Avaya 2490 LE40A626 ICD-MS500 RS6 3 F64800W Trans-IT Kxtg7574C S10 2002 Setup M2NPV-MX Pilot 300 C SS13E Prodikeys OT-105A 42LG30-UD Siminor S433 DCR-SC100 VF-74CP Programchart QW-590 GR-B652YLS Abkep1 PV-L657D The Past MC235 DMC-TZ3 BA 410 SS-MB250H P2015N 540 II 300 GPS DJM-707 NN-D998W Scenic 2 TO7470 Magicolor 7300 AZ1316 00C DW-8000 XV-DV88 Tecra M4 19LS4D KX-TG8011FX MFC-9800 1390 MF Longshot HT-S5200 HVR-HD1000P DAV-DZ870M Mini 1101 Sirius S50 EL-6890S I9950 Avic-F920BT HD7810 MH110 TNC 415B Easyshare Z915 CDA-7894RB Telephone ZRT623W UR4U-mdvr2 WD-1018C SX 50 How To Program Stratoliner-2006 ST1000 Motorola V265 Office-stapler
manuel d'instructions, Guide de l'utilisateur | Manual de instrucciones, Instrucciones de uso | Bedienungsanleitung, Bedienungsanleitung | Manual de Instruções, guia do usuário | инструкция | návod na použitie, Užívateľská príručka, návod k použití | bruksanvisningen | instrukcja, podręcznik użytkownika | kullanım kılavuzu, Kullanım | kézikönyv, használati útmutató | manuale di istruzioni, istruzioni d'uso | handleiding, gebruikershandleiding
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101