CTGRD3N 3110 manual booklet.QXD

5/2/06

3:08 PM

Page 1

TABLE OF CONTENTS
Introduction. 3 Features And Functions. 4

Key Charts. 4

Installing Batteries. 5 Setting Up Your Components. 5 Programming TV/VCR Combo Control. 6 Programming TV/DVD Combo Control. 6 Searching For Your Code. 7 Checking The Codes. 7 Re-Assigning Device Keys. 7 Changing Volume Lock. 8
To Change Volume Lock To Another Mode. 8 Unlocking Volume Control. 8
Troubleshooting. 9 Instructions To The User. 10 Lifetime Warranty. 10 Additional Information. 11 Manufacturers Codes. 12
Setup Codes For Cable Boxes. 12 Setup Codes For Cable Box / PVR (or DVR) Combos. 12 Setup Codes For Satellite Receiver. 12 Setup Codes For Satellite Receiver / PVR (or DVR) Combos. 12 Setup Codes For TVs. 13 Setup Codes For VCRs. 14 Setup Codes For PVRs (or DVRs). 15 Setup Codes For TV/VCR Combos. 16 Setup Codes For DVD Players. 16 Setup Codes For DVD Players / VCR Combos. 17 Setup Codes For TV/DVD Player Combos. 17 Setup Codes For TV/VCR/DVD Player Combos. 17

Page 3

INTRODUCTION
The One For All 3 Devices Universal Remote Control is designed to operate three home entertainment devices, depending on the model purchased (see Key Charts, Mode Keys on the right). The remote control requires two fresh AAA alkaline batteries (not included) and easy programming to control your devices.For best results, please read and perform all instructions listed here.Also, keep these instructions for future reference.

FEATURES AND FUNCTIONS

Use the Key Charts to learn how to use the universal functions of the One For All 3 Devices Universal Remote Control.

Key Charts

The LED (red light) blinks to show that the remote control is working and is sending signals. Use SET for all programming sequences. Press POWER once to turn on or off the selected device.
Device Keys for 3 Devices:
Press VCR/DVD, CBL/SAT, or TV once to select a home entertainment device to control. Press SLEEP to activate your devices sleep timer (not available for all devices). Use TV/VID to switch the TVs input to view TV or video program. Use the keypad (0 ~ 9) to directly select channels (for example, 09 or 31).
Press ENTER once after entering channel numbers on some TV models. Press PREV CH once to recall the last-viewed channel and to page back one screen on the main menu. Press MUTE once to turn sound off or on. Use MENU (or EXIT) to choose options (or exit) from your selected devices menu or guide. Use CH + (or CH -) to select the next higher(or lower) channel. Use VOL+ (or VOL-) to raise (or lower) the sound volume. When controlling a DVD player, use SKIP FORWARD to next DVD chapter., use SKIP REVERSE to the last DVD chapter.
Press SHIFT and use the Up/Down/Left/ Right cursor keys to move the cursor in the program guide and menu screens. Press SHIFT and MUTE to select a menu item. Use the transport keys to control your VCR, CD or DVD player, or VOD. To record a program, press the record key (REC) twice.

Page 5

INSTALLING BATTERIES
1. On the remote controls back, push the tab and lift off the battery cover. 4.
NOTE: If the LED did not blink twice, then repeat steps 2 through 3 and try entering the same code again.
Aim the remote control at the device and press POWER once. The device should turn off. If it does not respond, repeat steps 2-3, trying each code for your brand until you find one that works. If it still does not work, try Searching For Your Code.
NOTE: If the device does not have a POWER key, press the (PLAY) key.

5. Repeat steps 1 through 4 for each device you want to control. 2. Obtain two (2) new AAA alkaline batteries. Match the + and marks on the batteries to the + and marks in the battery case, then insert the new batteries.
PROGRAMMING TV/VCR COMBO CONTROL
Perform the following instructions to control a TV/VCR Combo: 1. Turn on the TV/VCR Combo and insert a video cassette.
NOTE: Please read steps 2-4 completely before proceeding. Highlight or write down the codes and device you wish to program before moving on to step 2.
2. 3. Press the battery cover back into place. The tab should click when the cover is locked.
On the remote control, press VCR/DVD. Press and hold SET until the LED blinks twice, then release SET.
3. Use the Setup Codes For TV/VCR Combos (on page 12) to locate the brand name and then enter the first four-digit code for your device. If performed correctly, the LED will blink twice.
4. Test the unit by pressing POWER and any mode key (e.g., TV). If the batteries are inserted correctly, the LED will blink once.
NOTE: When batteries need replacement, the remote control will stop operating. Remove the old batteries and insert new ones within 30 minutes to ensure all of your programming information is restored.
Aim the remote control at the device and press POWER once. It should turn off. If the device does not respond, repeat steps 2-3, trying each code for your brand until you find one that works. If it still does not work, try Searching For Your Code.
SETTING UP YOUR COMPONENTS
The One For All 3 Devices remote control is preprogrammed at the factory to operate an RCA TV and VCR, a Motorola (GI) cable box, and a Toshiba DVD player. To control devices other than the default brands, perform the following steps; otherwise skip this section:
NOTE: For TV/VCR Combo control, see the next section.
PROGRAMMING TV/DVD COMBO CONTROL
Perform the following instructions to control a TV/DVD Combo: 1. Turn on your TV/DVD and insert a disc. 2. On the remote control, press VCR/DVD. Press and hold SET until LED blinks twice, then release SET. 3. Use the Setup Codes For TV/DVD Combos (on page 12) to locate the brand name and then enter the first fourdigit code for your device. If performed correctly, the LED will blink twice. 4. Aim the remote control at your TV/DVD and press POWER. Your TV/DVD should turn off. If your original TV/DVD remote control did not have a POWER key, press PLAY.Your TV/DVD should start to play. If your TV/DVD does not respond, repeat steps 2-4, trying each code listed for your brand until you find the one that operates your TV/DVD.
1. Turn on a device (e.g.,VCR) and, if applicable, insert media, (e.g., cassette or disc).
On the remote control, press a device key once (i.e., VCR/DVD, CBL/SAT, or TV). Press and hold SET until the LED blinks twice, then release SET.

3. Use the Manufacturers Codes (starting on page 11) to locate the type of device and brand name and then enter the first four-digit code for your component. If performed correctly, the LED will blink twice.
5. Your One For All 3 Devices is now programmed to operate your TV/DVD.Write your TV/DVD code for future reference. Remember, if you want to use your One For All 3 Devices to operate your TV/DVD, press the VCR/DVD key first.

Page 7

SEARCHING FOR YOUR CODE
If your device does not respond to the remote control after trying all codes listed for your brand, or if your brand is not listed at all, try searching for your code. For example, to search for a code for your TV: 1. 2. On the remote control, press TV once. Press and hold SET until the LED blinks twice, then release SET.
Enter 9 - 9 - 2. The LED will blink twice. Press TV once, then press VCR/DVD once.
4. The VCR/DVD key is now ready to be programmed for your second TV. (see Setting Up Your Components). To re-assign other device keys, repeat steps 1 through 4 by substituting the key sequence from the below chart for the most popular components:
Enter 9 - 9 - 1. The LED will blink twice. Aim the remote control at the the TV and slowly alternate between pressing POWER and TV. Stop when the TV turns off.

To Re-Assign Key

VCR/DVD as 2nd TV key: VCR/DVD as 2nd CBL key: VCR/DVD as 2nd SAT key: VCR/DVD back to VCR/DVD:

Sequence Perform

SET - 9 - 9 - 2 - TV - VCR/DVD SET - 9 - 9 - 2 - CBL/SAT - VCR/DVD SET - 9 - 9 - 2 - CBL/SAT - VCR/DVD SET - 9 - 9 - 2 - VCR/DVD - VCR/DVD
NOTE: In the search mode, the remote control will send IR codes from its library to the selected device, starting with the most popular code first.
To lock in the code, press and hold SET until the LED blinks twice, then release SET.
When a re-assignment is done, the LED will blink twice to confirm your choice.At that time, you will need to program the remote control for the new device (see Setting Up Your Components).
6. To search for the codes of your other devices, repeat steps 1 through 5, but substitute the appropriate device key for the device you are searching for.

CHANGING VOLUME LOCK

The One For All 3 Devices is set to control the volume of your TV in the TV,VCR, CBL/SAT, and DVD modes. If you want the volume to be controlled by a mode other than TV (e.g., CBL/SAT), change the Volume Lock as follows:

CHECKING THE CODES

If you have set up the remote control using the Searching For Your Code procedure, you may need to find out which four-digit code is operating your equipment: For example, to find out which code is operating your TV: 1. 2. 3. On the remote control, press TV once. Press and hold SET until the LED blinks twice, then release SET. Enter 9 - 9 - 0. The LED will blink twice.
To Change Volume Lock To Another Mode:
1. 2. 3. On the remote control, press and hold SET until the LED blinks twice, then release SET. Enter 9 - 9 - 3 and then press any mode key once (except TV). The LED will blink twice. Now, whenever you press VOL+, or VOL, volume will be controlled by your mode choice.
4. To view the code for the first digit, press 1 once.Wait 3 seconds, count the LED blinks (e.g., 3 blinks = 3) and write down the number.
NOTE: If a code digit is 0, the LED will not blink.
Unlocking Volume Control:
NOTE: Perform these instructions when you want independent volume control for each programmed device (e.g., TV volume control in TV mode, CBL/SAT volume control in CBL/SAT mode, etc.)
5. Repeat step 4 three more times for remaining digits. Use 2 for the second digit, 3 for the third digit, and 4 for the fourth digit. 6. To check for codes of other devices, repeat steps 1 through 5, but substitute the appropriate device key for each device you are checking.As before, write down each four-digit code.
On the remote control, press and hold SET until the LED blinks twice, then release SET. Enter 9 - 9 - 3 and then press VOL+.The LED will blink four times.
3. Volume will again be controlled according to its default states.

RE-ASSIGNING DEVICE KEYS

The One For All 3 Devices can be set to control a second TV,VCR, or DVD player. For example, to control two TVs, a VCR, and a cable box, you will need to re-assign the unused VCR/DVD key to operate the second TV as follows: 1. On the remote control, press and hold SET until the LED blinks twice, then release SET.

Page 9

TROUBLESHOOTING
PROBLEM: SOLUTION: PROBLEM: SOLUTION: LED does not blink when you press a key. Replace batteries with four new AAA alkaline batteries. LED blinks when you press a key, but home entertainment component does not respond. Make sure the remote control is aimed at your home entertainment device and is not farther than 15 feet away. The unit does not control home entertainment devices or commands are not working properly. Try all listed codes for thecomponent brands being set up. Make sure they can be operated with an infrared remote control. TV/VCR combo does not respond properly. Use the VCR codes for your brand. Some combo units may require both a TV code and a VCR code for full operation. Changing channels does not work properly. If original remote control required pressing ENTER to change channels, press ENTER on the remote control after entering the channel number. Tried Search Method and still could not find a working code. Clear the device key as follows: Press and hold SET until the LED blinks twice, then release. Next enter 9 - 9 - 2. Then press the device key to be cleared twice. Now repeat the Search Method.

CH + and CH - do not work for your RCA TV.

INSTRUCTIONS TO THE USER

This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide a reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase separation between equipment and receiver. Connect equipment into an outlet or a circuit different from that to which the receiver is connected. Consult dealer or experienced radio/TV technician for help.

PROBLEM: SOLUTION:

LIFETIME WARRANTY
One For ALL ("OFA") warrants this product to be free from defects in materials and workmanship, under normal use, throughout the period of the products ownership by the original purchaser. This warranty does not cover damages or failures caused by products or services not supplied by OFA, or which result from accident, misuses, abuse, neglect, mishandling, misapplication, faulty installation, set-up adjustment, improper maintenance, alteration, maladjustment of consumer controls, modifications, commercial use, or that is attributable to acts of God. There are no express warranties except as listed above. OFA SHALL NOT BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF THIS PRODUCT OR ARISING OUT OF ANY BREACH OF WARRANTY,ALL EXPRESS AND IMPLIED WARRANTIES, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE,ARE LIMITED TO THE WARRANTY PERIOD SET FORTH ABOVE. Some states do not allow the exclusion or limitation of incidental or consequential damagers, or limitations on how long an implied warranty lasts, so the above exclusions or limitations may not apply to you. This warranty gives you specific legal rights and you may also have other rights which vary from state to state. To obtain warranty service for a defective product, please return the product, preferably in the original carton, along with your purchase receipt, to the store of original purchase for the first 90 days.A note detailing the complaint would be helpful. The store, at its option, will replace or repair this product if found to be defective. If the unit has been purchased more than 90 days ago, please return it to CT Global Inc. 2305 Hurstbourne Village Dr. Suite 1000 Louisville, KY 40299 USA together with the original receipt and $3.95 to cover postage and handling. It will be repaired or replaced at the manufacturers option. The manufacturer reserves the right to substitute a currently manufactured model with equal or superior features.

PROBLEM: SOLUTION: PROBLEM: SOLUTION:
Due to RCA design (1983- 1987), only the original remote control will operate these functions. Remote control does not turn on Sony or Sharp TV/VCR Combo. For power on, these products require programming TV codes. For Sony, use TV code 0000 and VCR code 0032. For Sharp, use TV code 0093 and VCR code 0048. If the above does not work.
Please contact us in any of the following ways:
Please visit : www.oneforall.com If the above website is not able to provide you with the information you need, please email us at ofasupport@ueic.com Customer Support : (330) 405-8612

Page 11

ADDITIONAL INFORMATION
As you update your home entertainment system, One For All has a universal remote control that will fit your needs. Look for these exciting products at a retailer near you.
One For All Access 3. URC-3605 One For All Big Easy 3-Device. URC-3300 One For All DVD Expert 4-Device. URC-4041 One For All Big Easy 4-Device. URC-4330 One For All Access 4. URC-4605 One For All Access 5. URC-5705 One For All 4 Device. URC-4021 One For All 3 Device. URC-3021 One For All PVR 6-Device. URC-6131 One For All 6-Device Home Theater. URC-6011 One For All 8-Device Home Theater. URC-8011 One For All 8L-Device Home Theater With Learning. URC-8811 One For All A/V LCD 8 Device With Learning. URC-8910 One For All IR/RF LCD 8 Device With Learning. URC-9910 One For All 8 Device Home Theater Remote Powered By Kameleon. URC-9960

MANUFACTURERS CODES

Setup Codes for Cable Boxes
ABC Americast Bell South Digeo Jerrold Memorex Motorola Pace Panasonic Paragon 0003, 0003, 0276, 1187, 1376 0008, 0000 Pioneer Pulsar Quasar Runco Scientific Atlanta Starcom Supercable Torx Toshiba Zenith 0533, 0008, 0000 0000, 0899
General Instrument 0003, 0276
Setup Codes for Cable Box/PVR (or DVR) Combos
Americast Digeo Motorola Pace 1376, Pioneer Scientific Atlanta Zenith 0899
Setup Codes for Satellite Receivers
DirecTV 1377, 0099, 0247, 0392, 0566, 0639, 0724, 0749, 0819, 1076, 1108, 1142,1392, 1442, 1609, 1639, 1640, 1749, Motorola Next Level Panasonic Paysat Philips Dish Network System 0775, 1005, 1505, 1775 Dishpro Echostar Expressvu GE GOI Hisense Hitachi HTS Hughes Hughes Network Systems iLo Jerrold JVC Magnavox Memorex Mitsubishi 0775, 1005, 1505, 1775 0775, 1005, 1505, 1775 0775, 1775 0392, 0566 0775, 0819 0775, 1775 0749, 1442, 1749 0749, 1142, 1442, 0869 0775, Pioneer Proscan Proton RadioShack RCA Samsung Sony Star Choice Tivo Toshiba UltimateTV Uniden US Digital USDTV Voom Zenith 0856, 0247, 0099, 0724, 0749, 0819, 1076, 1142, 1442, 0392, 0869 0392, 0566, 0855, 1392 1108, 1142, 1276, 1377, 1442, 1609 0639, 1639, 1142, 1442 0749, 0790, 0819, 1285, 1749 1392, 0869 1856

Dish Network

ONE FOR ALL is the registered trademark of Universal Electronics Inc. Computime International Ltd. is the Licensee of the ONE FOR ALL brand for USA and Canada. Copyright 2006 by Universal Electronics Inc. No part of this publication may be reproduced, transmitted, transcribed, stored in any retrieval system, or translated to any language, in any form or by any means, electronic, mechanical, magnetic, optical, manual, or otherwise, without the prior written permission of Universal Electronics Inc. One For All 3 Devices is compatibile for use in North America excluding Mexico. URC-3110 01/06

General Instrument 0869

Setup Codes for Satellite Receiver/PVR (or DVR) Combos
DirecTV 1377, 0099, 0392, 0639, 1076, 1142, 1392, 1442,1640 0775, 1505 0775, 1142, 1442 Motorola Philips Proscan RCA Samsung Sony Star Choice 0869 1142, 0639, 1640 0869
Dish Network System 0775, 1505 Dishpro Echostar Expressvu Hughes Network Systems

continued on next page.

Page 13

Setup Codes for TVs

Admiral Advent Aiko Akai America Action Anam AOC Apex Digital Audiovox Aventura Bell & Howell Bradford Broksonic Candle Carnivale Carver Celebrity Celera Changhong Citizen Clarion Contec Craig Crosley Crown Curtis Mathes CXC Daewoo Denon Diamond Vision Dumont Durabrand Dwin Electroband Electrograph Emerson Envision ESA Fisher Funai Futuretech Gateway GE Gibralter GoldStar Grunpy Haier Hallmark Harman/Kardon Harvard Havermy Hello Kitty Hisense Hitachi iLo Infinity 0093, 0463 0761, 0783, 0815, 0817, 0030, 0060, 0672, 0702, 0156, 0748, 0765, 0767, 0879 0092, 0180, 0180, 0236, 0765 0030, 0060, 0030, 0047, 0054, 0060, 0093, 0145, 0154, 0166, 0451, 0092, 0451, 0672, 1996, 0171, 0178, 0180, 0463, 0154, 0171, 0178, 0180, 0236, 0451, 0463, 1944, 0171, 0171, 1755, 1756 0047, 0051, 0178, 0451 0017, 0030 0030, RCA Realistic Runco Sampo Samsung Sansui Sanyo Insignia Inteq JBL JCB Jensen JVC KEC Kenwood KLH KTV LG LXI Magnavox Marantz Matsushita Maxent Megatron Memorex MGA Midland Mitsubishi Motorola MTC Multitech NAD NEC NetTV Nikko Norcent Norwood Micro NTC Onwa Optimus Optonica Orion Panasonic Penney Philco Philips Pilot Pioneer Polaroid Portland Prima Prism Proscan Proton Pulsar Quasar RadioShack 0761, 0815, 0765, 0767 0030, 0180 0178, 1265 0047, 0054, 0154, 0156, 0178 0030, 0054, 1944, 1963 0030, 1755 0145, 0178 0150, 0154, 0178, 0463 0030, 0150, 0178 0017, 0047, 0051 0093, 0150, 0178, 0030, 0156, 1755 0030, 0092, 0180 0154, 0166, 0250 0093, 0165 0236, 0463 0051, 0250 0030, 0047, 0051, 0060, 0156, 0178 0030, 0054 0054, 0166, 0092 0761, 0783, 0815, 0017 0051, 0165, 0250 0030, 0047, 0154, 0165, 0178, 0180 0047, 0090, 0679 0030, 0154, 0165, 0178, 0180 0017, 0030 0030, 1755 0030, 0060, 0178, 0702, 0154

Scotch Scott Sears Sharp Sheng Chia Sony Soundesign Squareview SSS Starlite Superscan Supreme SVA Sylvania Symphonic Tandy Tatung Technics Techwood
0178 0178, 0180, 0236 0047, 0054, 0154, 0156, 0171, 0178 0093, 0000 0178, 0748 0030, 0054, 0171, 1944, 1963 0171, 1286, 1756 0051, 0250 0051
Teknika Telefunken TMK TNCi Toshiba TVS US Logic Vector Research Victor Vidikron Vidtech Viewsonic Vizio Wards Waycon Westinghouse Yamaha Zenith
0054, 0060, 0092, 0150, 0060, 0154, 0156, 1756 0030, 0054, 0165, 0000, 0017, 0092, 0178, 0463, 1265

White Westinghouse 0463

Setup Codes For VCRs
ABS Admiral Adventura Aiwa Alienware American High Asha Audiovox Beaumark Bell & Howell Broksonic Calix Canon Carver CCE Citizen Colt Craig Curtis Mathes Cybernex CyberPower Daewoo Dell Denon DirecTV Durabrand Dynatech Electrohome Electrophonic Emerex Emerson Fisher Fuji Funai Garrard Gateway GE Go Video 1972 0048, 0000, 0104 0121, 0184, 0209, 0072 0037, 0037, 0047, 0072, 0240 0035, 0060, 0162, 1972 0045, 0037, 0032 0000, 0037, 0043, 0121, 0184, 0209, 0593, 1278, 1479, 1593 0047, 0000, 0593, 1972 0035, 0060, 0240, 0807, 1035, MGA MGN Technology Microsoft Mind GoldStar Gradiente Harley Davidson Harman/Kardon Harwood Hewlett Packard HI-Q Hitachi HP Hughes Network Systems Humax Hush iBUYPOWER JVC KEC Kenwood KLH Kodak Linksys Lloyd's Logik LXI Magnasonic Magnavox Magnin Marantz Marta Matsushita Media Center PC MEI Memorex 0037, 0047 0000, 0042, 0035, 0037 0593, 1278 0000, 0035, 0039, 0081, 0035, 0035, 0035 0000, 0035, 0037, 0039, 0047, 0048, 0104, 0162, 0209, 0240, 1237 0043, 1972 1972
Commercial Solutions 0047

Howard Computers 1972

Page 15
Setup Codes for VCRs (continues)
Minolta Mitsubishi Motorola MTC Multitech NEC Nikko Niveus Media Noblex Northgate Olympus Optimus Orion Panasonic Penney Pentax Philco Philips Pilot Pioneer Polk Audio Presidian Profitronic Proscan Protec Pulsar Quasar RadioShack Radix Randex RCA Realistic ReplayTV Ricavision Runco Samsung Sanky Sansui 0042 0043, 0067, 0807 0035, 0048 0000, 0240 0000, 0072 0067, 0037, 0048, 0104, 0162, 0593, 1062 0184, 0209, 1479 0035, 0162, 0616, 1035, 1062 0035, 0037, 0042, 0240, 1035, 0035 0035, 0081, 0618, 0060, 0039 0035, 0162, 0042, 0060, 0240, 0807, 0880, 1035, 1060 0000, 0035, 0037, 0047, 0048, 0104 0614, 0039 0045, 0240, 0739, 1014 0039, 0048 0000, 0067, 0209, 1479 XR-1000 Zenith ZT Group Totevision Touch Unitech Vector Video Concepts Videomagic Videosonic Viewsonic Villain Voodoo Wards Symphonic Systemax Tagar Systems Teac Technics Teknika Thomas Tivo TMK Toshiba Stack 9 STS Sylvania Sharp Shintom Shogun Singer Sonic Blue Sony Sanyo Scott Sears 0047, 0104, 0240 0043, 0045, 0121, 0184 0000, 0035, 0037, 0042, 0047, 0104, 1237 0048, 0614, 0616 0000, 0032, 0035, 0636, 1232, 0042 0000, 0035, 0043, 0081, 0593, 1593 0000, 0593, 0035, 0162 0000, 0035, 0618, 0636, 0043, 0045, 0209, 0845, 1008, 1145, 1972, 1503 0037, 0000, 0035, 0042, 0047, 0048, 0060, 0072, 0081, 0240 0000, 0035, 0072 0000, 0039, 0209, 1479 1972

Toshiba Touch Viewsonic

1008, 1972

Voodoo ZT Group

1972 1972
Setup Codes For TV/VCR Combos
Broksonic Citizen Colt Curtis Mathes Daewoo Emerson Funai GE GoldStar Harley Davidson Hitachi Lloyd's Magnasonic Magnavox Magnin Memorex MGA Mitsubishi 1278 0593, 1278, 0240, 0807, 1035, 0000 0593, 1278 0000, 0162, 0807 Optimus Orion Panasonic Penney Quasar RadioShack RCA Samsung Sansui Sanyo Sears Sony Symphonic Thomas Toshiba Zenith 0162, 0162, 1035 0240, 1035, 1237 0162, 0240, 0807, 1035, 0000, 0000, 1237 0000, 1232 0000, 0845, 1145 0000, 1479
Setup Codes for DVD Players
Akai Alco Apex Digital Aspire Digital Audiovox Blaupunkt Blue Parade Broksonic Citizen CyberHome Daewoo Denon Diamond Vision Disney Durabrand DVD2000 Emerson Funai Gateway GE 0695, 0672, 0717, 0755, 0794, 0796, 0830, 1020, 1056, 1169, 1316, 1609, 1610 0675, 0521 0675, 0821, 1268 0675, 1268, 1334 1073, 1158 0522, 0717 0741, 0744, 1044, 1075, 1158, 1304, 0539 0573, 1348, 1472 0717, 0571, 0627 0558, 0623, 0867, 0490 0717, 0790, 1020, 1149 Philips Pioneer Polaroid Polk Audio Presidian Proceed Proscan RCA Regent Rotel Samsung Sansui Sanyo Sensory Science Sharp Marantz McIntosh Memorex Microsoft Mintek Mitsubishi NAD Nesa NexxTech Norcent Onkyo Panasonic Lecson Lenoxx LG LiteOn Magnavox 1533 1127, 1158, 1416, 1440 0503, 0539, 0646, 0675, 0821, 1533 0695, 0717, 1472 0521, 0717 1402, 0503, 0627 0490, 0503, 0703, 1362, 1462, 1490, 1762 0503, 0539, 0646, 0675, 1260, 1267, 1354 0525, 0571 1020, 1061, 0522 0522, 0571, 0717, 0790, 0822, 1022, 0623 0490, 0573, 0744, 0820, 0899, 1044, 0630, 0675, 1256
California Audio Labs 0490
White Westinghouse 0072, 0209
Setup Codes for PVRs (or DVRs)
ABS Alienware CyberPower Dell DirecTV Gateway Hewlett Packard HP Hughes Network Systems Humax Hush iBUYPOWER Linksys Media Center PC Microsoft Mind Niveus Media Northgate Panasonic Philips RCA ReplayTV Samsung Sonic Blue Sony Stack 9 Systemax Tagar Systems Tivo 0616 0618, 0614, 0614, 0616 0636, 0618, 0636, 0739
Go Video GoldStar Gradiente Greenhill Grundig Hitachi Hiteker iLo Initial Insignia Integra JVC Kawasaki Kenwood KLH

Page 17

Setup Codes for DVD Players (continues)

Shinsonic Sony Superscan Sylvania Symphonic Teac Technics 0533 0533, 0864, 1033, 1431, 0675, 0821, 1268 0675, 0490, 0703 Theta Digital Toshiba Urban Concepts Venturer Xbox Yamaha Zenith 0571 0503, 0695, 1045, 0490, 0539 0503, 0741
Setup Codes For DVD Player/VCR Combos
Apex Digital Broksonic Emerson Funai Go Video GoldStar JVC LG Memorex Panasonic Philips 0741, 0744, 1044, 0867, 0675, 1267 Polaroid Presidian RCA Samsung Sansui Sharp Sony Sylvania Symphonic Toshiba Zenith 0522, 0822 0820, 1044, 0630 0864, 1033, 0741
Setup Codes For TV/DVD Player Combos
Akai Apex Digital Broksonic Diamond Vision Emerson Hitachi iLo Initial Magnavox 0675, 1268 Mintek Panasonic Philips RCA Samsung Sansui Sylvania Toshiba 0675, 1268 0695
Setup Codes For TV/VCR/DVD Player Combos
Akai Diamond Vision Emerson Funai Magnavox Panasonic 0821 1362, 1462 RCA Sharp Superscan Sylvania Toshiba 1045

NOTE: When batteries need replacement, the remote control will stop operating. Remove the old batteries and insert new ones within 10 minutes to ensure all of your programming information is restored.

Page 9

PROGRAMMING DEVICE CONTROL
The One For All 6-Device PVR Universal Remote Control is preprogrammed at the factory to operate an RCA TV, VCR, and satellite receiver, a Philips Tivo PVR, a Toshiba DVD player, and a Pioneer audio receiver/amplifier. To control devices other than the default brands, perform the following steps; otherwise skip this section:
NOTE: For DVD Player/VCR Combo control, see the next page.
Turn on a desired device (e.g.,VCR or DVD player) and, if applicable, insert media (e.g., cassette or disc).
NOTE: Please read steps 2 through 4 completely before proceeding. Highlight or write down the codes and device you wish to program before starting step 2.
On the remote control,press a device key once (i.e., TV, PVR, DVD, CBL/SAT, AUD,or VCR).
NOTE: To program control of a cable box or satellite receiver, press CBL/SAT once. NOTE: To program control of a CD player or audio receiver, press AUD once. NOTE: To program control of a TV/VCR Combo, press VCR once. After programming, you will be able to control channel selection, volume, and VCR functions. NOTE: To program control of a TV/DVD Player Combo, press DVD once. After programming, you will be able to control channel selection, volume, and DVD functions.
Press and hold SET until the LED (red light) blinks twice, then release SET. Use the Manufacturers Codes (starting on page 17) to locate the type of device and brand name and then enter the first fourdigit code for your device. If performed correctly, the LED will blink twice.
NOTE: If the LED did not blink twice, repeat steps 2 through 4 and enter the same code again.
Aim the remote control at the device and press POWER once. The device should turn off. If it does not, repeat steps 2 through 5, trying each code for your brand until you find one that works. If it still doesnt work, try Searching For Your Code on page 11.
NOTE: If the device does not have a POWER key, press the (Play) key. continued on next page.

Page 10

PROGRAMMING DEVICE CONTROL (continued)
6. Repeat steps 1 through 5 (on the previous page) for each device you want to control. For future reference,write down each working device code in the following boxes:
TV Code: PVR Code: DVD Code: CBL/SAT Code: AUD Code: VCR Code:
PROGRAMMING DVD PLAYER/VCR COMBO CONTROL
1. Turn on the DVD Player/VCR Combo and insert a DVD.

On the remote control, press DVD. Next, press and hold SET until the LED (red light) blinks twice, then release SET. Use the Setup Codes For DVD Player/VCR Combos (on page 21) to locate the brand name and then enter the first four-digit code for your device. If performed correctly, the LED will blink twice.
Aim the remote control at the device and press POWER once. It should turn off. If it does not, repeat steps 2 through 4, trying each code for your brand until you find one that works. If it still does not work, try Searching For Your Code on the next page.
NOTE: If the device does not have a POWER key, press the (Play) key.

Page 11

If youve located a setup code that works, but it also has a separate VCR code, youll also need to program it into the remote control to access VCR controls as follows: a. Press VCR once. Then press and hold the SET key until the LED blinks twice. b. Enter the VCR code for your DVD Player/VCR Combo. If correct, the LED will blink twice.
NOTE: If a separate VCR setup code is not listed, you can use the VCR key to program a separate VCR device or another device (see Re-Assigning Device Keyson page 15)
For future reference, write down the working DVD Player/VCR combo code in the below boxes:

DVD/VCR Code: VCR Code:

(if used)

SEARCHING FOR YOUR CODE

If your device does not respond to the remote control after trying all codes listed for your brand, or if your brand is not listed at all, try searching for your code. For example, to search for a code for your TV: 1. 2. 3. On the remote control, press TV once. Press and hold SET until the LED (red light) blinks twice, then release SET. Enter 9 - 9 - 1. The LED will blink twice.
Aim the remote control at the the TV and slowly alternate between pressing POWER and TV. Stop when the TV turns off.
NOTE: In the search mode, the remote control will send IR codes from its library to the selected device, starting with the most popular code first.
To lock in the code, press and release SET. The LED will blink twice. To search for the codes of your other devices, repeat steps 1 through 5, but substitute the appropriate device key for the device you are searching for. 11

Page 12

CHECKING THE CODES
If you have set up the remote control using the Searching For Your Code procedure (on the previous page), you may need to find out which four-digit code is operating your equipment. For example,to find out which code is operating your TV: 1. 2. 3. On the remote control, press TV once. Press and hold SET until the LED (red light) blinks twice, then release SET. Enter 9 - 9 - 0. The LED will blink twice.
To view the code for the first digit, press 1 once.Wait 3 seconds, count the LED blinks (e.g., three blinks = 3) and write down the number in the leftmost box in the TV code boxes on page 10

NOTE: If a code digit is 0, the LED will not blink.
Repeat step 4 three more times for remaining digits. Use 2 for the second digit, 3 for the third digit, and 4 for the fourth digit. Write down the code digits in the remaining TV code boxes on page 10. To check for codes of other devices, repeat steps 1 through 5, but substitute the appropriate device key for each device you are checking.Write down the devices code digits in the appropriate code boxes on page 10.

PROGRAMMING MASTER POWER

In its default state, the POWER key on the URC-6131 remote control will individually power your home entertainment devices on or off. However, you can also program a Master Power function onto the POWER key that will sequentially turn on or off all the devices with a single key press.
Programming The Power Key For Master Power
1. Press and hold SET until the LED (red light) blinks twice, then release SET.

Page 13

Enter 9 - 9 - 5. The LED will blink twice. Then press POWER once.
For the first device you want in the power on sequence, press its device key (e.g., CBL/SAT) once. Repeat step 3 up to five more times to add desired devices to the power-on sequence. To save the settings and exit the program, press and hold SET until the LED blinks twice, then release SET. After programming, point the remote control at the devices and press POWER for at least 2 seconds to sequentially turn on or off your devices.
NOTE: When POWER is pressed for less than 2 seconds, a power command will only be sent to the currently-selected device. This allows you to still individually power devices on or off.

Operating Master Power

You will see the devices turn on or off according to your programmed sequence.
NOTE: The currently-selected device will always turn on first, followed by the remaining programmed sequence. After the master power sequence has been completed, the remote control will be set to control the first powered-on device. NOTE: If one or more devices does not have a POWER key, the power off/on sequence may be slightly delayed when the remote control signals the device(s). This action is normal.

Clearing Master Power

1. 2. Press and hold SET until the LED (red light) blinks twice, then release SET. Enter 9 - 9 - 5. The LED will blink twice. Then press POWER once.

Press and hold SET until the LED blinks twice, then release SET. Master Power is now cleared.

Page 14

USING KEYMOVER
The One For All 6-Device PVR Universal Remote Control includes a Keymover feature that allows you to map (or copy) keys from one mode (i.e., source mode) to another mode (i.e., destination mode).
NOTE: The following keys cannot be used as a source or destination: TV, PVR, DVD, CBL/SAT, AUD, VCR, and SET.

Programming Keymover

For example, if your VCR does not have volume control, you can map those keys (i.e., VOL+, VOL-, and Mute) from the TV mode to the VCR mode as follows: 1. 2. Press and hold SET until the LED (red light) blinks twice, then release SET. Enter 9 - 9 - 4. The LED will blink twice.

3. 4. 5. 6. 7. 8.

For the source mode, press TV once. For the source key, press VOL+ once. For the destination mode, press VCR once. For the destination key, press VOL+ once. The LED will blink twice indicating the keymoved sequence is correct. Repeat steps 1 through 7 twice more to map remaining volume control keys, substituting VOL- and Mute as source and destination keys in steps 4 and 6.
Upon completion of the above procedure, you can now use your One For All 6-Device PVR Universal Remote Control to control the TVs volume and mute in the VCR mode, as well as in the TV mode.
Restoring Keymoved Keys to Default Settings
Restoring A Single Keymoved Key 1. 2. 3. Press a device key that has a keymoved key. Press and hold SET until the LED (red light) blinks twice, then release SET. Enter 9 - 9 - 4. The LED will blink twice.
Press the destination key twice (where the keymoved key is stored). The LED will blink twice. 14

Page 15

Restoring All Keymoved Keys In A Single Mode 1. 2. 3. Press and hold SET until the LED (red light) blinks twice, then release SET. Enter 9 - 9 - 4. The LED will blink twice. Press the destination mode twice (where keymoved keys are stored). The LED will blink twice.

RE-ASSIGNING DEVICE KEYS

The One For All 6-Device PVR Universal Remote Control can be set to control a second TV, PVR,VCR, DVD player, or other device. For example, to control a TV, a cable box, and two VCRs, you will need to re-assign the unused DVD key to operate the second VCR as follows: 1. On the remote control, press and hold SET until the LED (red light) blinks twice, then release SET. Enter 9 - 9 - 2. The LED will blink twice.

Press VCR once, then press DVD once. The LED will blink twice. The DVD key is now ready to be programmed for your second VCR. See Programming Device Control on page 9.
To re-assign other device keys to the DVD key, repeat steps 1 through 4 with a sequence from the below chart:
NOTE: Only one device can be assigned to an unused device key at a time.

To Re-Assign Device

DVD as 2nd TV key: DVD as 2nd PVR key: DVD as 2nd AUD key:

Perform Sequence

SET - 9 - 9 - 2 - TV - DVD SET - 9 - 9 - 2 - PVR - DVD SET - 9 - 9 - 2 - AUD - DVD
DVD as 2nd CBL/SAT key: SET - 9 - 9 - 2 - CBL/SAT - DVD
You can also re-assign another unused device key by substituting it for the DVD key above and performing the sequence. For example, to re-assign an unused AUD key as a second VCR key, perform SET - 9 - 9 - 2 - VCR - AUD. When a re-assignment is done, the LED will blink twice to confirm your choice.At that time, you will need to program the remote control for the new device (see Programming Device Control on page 9). 15

Page 16

CHANGING VOLUME LOCK
The One For All 6-Device PVR Universal Remote Control is set at the factory for independent volume control of each selected device. However, you may change the Volume Lock setting to Global Volume Lock so that a devices volume will be locked to one mode (e.g., to control TV volume in all other modes).After that, if desired, you can perform Individual Volume Unlock on a selected device to set its volume control for independent operation.
Locking Volume Control To One Mode (Global Volume Lock)
1. 2. Press and hold SET until the LED (red light) blinks twice, then release SET. Enter 9 - 9 - 3 and then press any mode key once (e.g., TV). The LED will blink twice. Now, when you press VOL+, VOL-, or Mute, the volume of the selected device (e.g., TV) will be controlled regardless of the mode you have selected.
Unlocking Volume Control For A Single Device (Individual Volume Unlock)
1. After performing Global Volume Lock (see above),press a desired mode key where you want volume to be unlocked (e.g., AUD) and controlled within its own mode. Press and and hold SET until the LED (red light) blinks twice,then release SET. Enter 9 - 9 - 3 and then press VOL- once. The LED will blink four times.
If desired, repeat steps 1 through 3 (of this section) for each device that you want volume to be unlocked. Now, after you select a device that has volume unlocked (e.g., AUD), pressing VOL+, VOL-, or Mute, will control the devices volume only in its own mode.

Page 17

Unlocking All Volume Control (Restoring Default Setting)
NOTE: Performing these instructions will restore independent volume control for all programmed devices (e.g., TV volume control in TV mode, VCR volume in VCR mode, etc.).
On the remote control, press and hold SET until the LED (red light) blinks twice,then release SET. Enter 9 - 9 - 3 and then press VOL+ once. The LED will blink four times.

Volume will again be independently controlled according to its default states for all programmed devices.

MANUFACTURERS CODES

Setup Codes For Audio Receivers
ADC Aiwa Alco Anam Apex Digital Audiotronic Audiovox Bose Capetronic Carver Denon Harman/Kardon JBL JVC KLH Kenwood Koss Linn MCS Magnavox Marantz Musicmagic Onkyo 0531 1089, 1405, 0121, 0158, 0189, 1089, 1189, 0189 1104, 1360 0110, 0189 0110, 1390 1313, 1027, 1570, 1569, 1089, 1189, 0189, 0531 1089, 1189, 0039, 0135, 0842, 1298

Page 18

Setup Codes For Audio Receivers (continued)
Optimus Panasonic Philips Pioneer Polk Audio Proscan Quasar RCA Samsung Sansui Sherwood Sony Soundesign Stereophonics Sunfire Technics Thorens Venturer Victor Wards Yamaha 1023, 0531, 0670 1518, 0039, 0309 1089, 1189, 1269, 0189 1023, 0014, 0150, 0531, 0630, 1023, 1254, 0531, 1390, 1089, 1058, 1258, 1158, 0158, 1558, 1658, 1308, 1309, 1518, 0039, 0014, 0158, 0189 0176, 1176
Setup Codes For Cable Boxes (Converters)
ABC Americast Bell & Howell Bell South Director General Instrument GoldStar Hamlin Jerrold Memorex Motorola Pace Panasonic Paragon Philips Pioneer Pulsar Quasar Regal Runco Samsung 0003, 0008, 0014, 0476 0476, 0003, 0276, 0009, 0273 0476, 0003, 0276, 0014, 0476, 0276, 0000, 0305, 0317 0877, 0144, 0533, 0000 0273, 0144

Page 19

Scientific Atlanta Sony Starcom Supercable Torx Toshiba Zenith
0877, 0008, 0017, 0477, 0000, 0525, 0899
Setup Codes For CD Players
Aiwa Burmester California Audio Labs Carver Classic DKK DMX Electronics Denon Fisher GPX Garrard Genexxa Harman/Kardon Hitachi JVC Kenwood Koss Krell Linn MCS MTC Magnavox Marantz Miro Mission NSM Nikko Onkyo Optimus Panasonic Parasound Philips Pioneer Polk Audio Proton QED Quasar 0029, 0303 0157, 0179, 0873, 0003 0174, 0393, 0157, 0072, 1294 0681, 0826, 0626, 0028, 0037, 0157 0626, 0029, 0157, 0174 0868, 0101 1063, 0000, 0032, 0037, 0145, 0179, 0420, 0437 0029, 0626, 0157 1063, 1062, 0029

Setup Codes For TVs

A-Mark AOC Abex Admiral Advent Adventura Aiko Aiwa Akai Alaron Ambassador America Action Anam Apex Digital Archer Audiovox Baysonic Belcor Bell & Howell Bradford Brockwood Broksonic CXC Candle Carnivale Carver Celebrity 0003 0030, 0019, 0003, 0093, 0748, 0765, 0451, 0180, 0003, 0092, 0019 0154, 0019 0236, 0463, 0030, 0056, 0046, 0054 0000

Page 24

Setup Codes For TVs (continued)
Changhong Cineral Citizen Clairtone Concerto Contec Craig Crosley Crown Curtis Mathes Daewoo Daytron Denon Dumont Dwin Electroband Electrohome Emerson Envision Fisher Fujitsu Funai Futuretech GE Gibralter GoldStar Gradiente Grunpy Haier Hallmark Harley Davidson Harman/Kardon Harvard Havermy Hitachi Infinity Inteq JBL JCB JVC Janeil KEC 0765 0451, 0092 0060, 0030, 0056, 0039, 0046, 0092, 0186, 0056 0180, 0157, 0054 0180, 0039 0047, 0054, 0154, 0451, 0093, 0060, 0030, 0145, 0056, 0016, 0039, 0166, 0702, 0747, 1147, 1347 0451, 0019, 0039, 0092, 0145 0017, 0000, 0154, 0236, 0463, 0180, 0282, 0178, 0019, 0179, 0039, 0038, 0177, 0185, 0280, 0154 0179, 0683 0180, 0179, 0047, 0051, 0451, 0282, 0178, 0021, 0027, 0747, 1147, 1347 0017, 0030, 0019 0030, 0178, 0019, 0001, 0032 0053, 0056 0180, 0093 0145, 0056, 0016, 0032, 0038, 0046 0180

Page 25

KTV Kenwood Kloss Konka LG LXI Logik Luxman MEI MGA MTC Magnavox Majestic Marantz Matsushita Megatron Memorex Mercury Midland Minutz Mitsubishi Motorola Multitech NAD NEC NTC Nikko Noshi Onwa Optimus Optonica Orion Panasonic Penney Philco Philips Pilot Pioneer Portland Princeton Prism Proscan Proton Pulsar Quasar
0180, 0030, 0039, 0185, 0280 0030, 0019 0024, 0046 0628, 0632, 0638, 0703, 0047, 0054, 0154, 0156, 0178, 0150, 0030, 0178, 0019 0060, 0030, 0019, 0056, 0185 0054, 0030, 0179, 0024, 0186, 0187, 0386, 1254, 0054, 0178, 0145, 0003 0154, 0250, 0463, 0150, 0178, 0179, 0047, 0017, 0051, 0039, 0032, 0093, 0150, 0178, 0180 0156, 0178, 0166 0030, 0019, 0056, 0030, 0178, 0180 0154, 0250, 0166 0093, 0165 0236, 0463, 0179 0250, 0051 0047, 0156, 0051, 0060, 0030, 0178, 0021, 0019, 0018, 0039, 0003, 0027, 0032, 0747, 1347 0054, 0463, 0030, 0145, 0019 0054, 1454 0030, 0019, 0039 0038, 0166, 0679 0019, 0039, 0051 0047, 0747 0178, 0003 0017, 0019 0250, 0051, 0165

Page 26

RCA RadioShack Realistic Rhapsody Runco SSS Sampo Samsung Samsux Sansei Sansui Sanyo Scimitsu Scotch Scott Sears Semivox Semp Sharp Shogun Signature Simpson Sony Soundesign Spectricon Squareview Starlite Supre-Macy Supreme Sylvania Symphonic TMK TNCi Tandy Tatung Technics Technol Ace Techwood Teknika Telefunken 0047, 0019, 0018, 0038, 0090, 0679, 0747, 1047, 1147, 1247, 1347, 1447, 1547 0047, 0154, 0165, 0180, 0030, 0178, 0019, 0056, 0039, 0032, 0747 0154, 0165, 0180, 0030, 0178, 0019, 0056, 0039, 0017, 0030, 0497, 0603 0180, 0019 0030, 0039, 0032 0060, 0030, 0178, 0019, 0056, 0032, 0702, 0178 0236, 0180, 0178, 0019, 0179 0047, 0054, 0154, 0156, 0178, 0179, 0056, 0171, 0156 0093, 0165, 0039, 0157, 0386, 0688, 0016 0186, 0187 0000, 0080, 0111, 1100 0180, 0178, 0179, 0054, 0030, 0171, 0381 0180, 0171 0178, 0056, 0250, 0051, 0056, 0003 0054, 0180, 0150, 0060, 0019, 0179, 0056, 0016, 0039, 0092, 0186 0056, 0702

Page 27

Toshiba Tosonic Totevision Trical Universal Vector Research Victor Vidikron Vidtech Viking Wards Waycon White Westinghouse Yamaha Zenith Zonda
0154, 0156, 0060, 0178, 0054, 0165, 0030, 0178, 0021, 0019, 0179, 0056, 0016, 0027, 0080, 0463, 0623 0030, 0019, 0769 0017, 0463, 0016, 0092 0003
Setup Codes For TV/DVD Player Combos
Broksonic Konka Panasonic Philips RCA Sharp Sylvania Toshiba 0695 0719, 0720 1362, 0821 0695
Setup Codes For TV/VCR Combos
Broksonic Citizen Colt Curtis Mathes Daewoo Emerson Funai GE GoldStar Harley Davidson Hitachi Lloyds Magnasonic Magnavox Magnin Memorex 0002, 1479 0278, 0002, 1278, 1035, 0240, 0807, 0000 0278, 1278 0000, 0037, 0454, 1037, 1162, 1237, 1262

Page 28

Setup Codes For TV/VCR Combos (continued)
MGA Mitsubishi Optimus Orion Panasonic Penney Quasar RadioShack RCA Sansui Sanyo Sears Sharp Sony Sylvania Symphonic Thomas Toshiba White Westinghouse Zenith 0454, 1162, 1262 0002, 1479 1035, 1162, 1262 0240, 1035, 1237 1035, 0807, 0240, 1035, 1060 0000, 0000, 0000, 0000, 1479

Setup Codes For VCRs

Admiral Adventura Aiko Aiwa Akai America Action American High Asha Audiovox Beaumark Bell & Howell Broksonic CCE Calix Canon Carver Cineral Citizen Colt Craig Curtis Mathes Cybernex 0048, 0278 0037, 0240 0037, 0104 184, 0121, 0209, 0002, 0479, 1479 0072, 0278 0037, 0278, 0037, 0047, 0240, 0072 0060, 0035, 0162, 0041, 0760, 1035 0240

Page 29

Daewoo Denon Dynatech Electrohome Electrophonic Emerex Emerson
0045, 0278, 0037, 0184, 0000, 0121, 0043, 0209, 0002, 0278, 0479, 1278, 1479 Fisher 0047, 0104 Fuji 0035, 0033 Funai 0000 GE 0060, 0035, 0240, 0760, 0807, 1035, 1060 Garrard 0000 Go Video 0432 GoldStar 0037, 0038, 1237 Gradiente 0000 HI-Q 0047 Harley Davidson 0000 Harman/Kardon 0081, 0038 Harwood 0072 Hitachi 0000, 0042, 0041 Hughes Network Systems 0042 JVC 0067, 0041 Jensen 0041 KEC 0037, 0278 KLH 0072 Keen 0693 Kenwood 0067, 0041, 0038 Kodak 0035, 0037 LXI 0037 Lloyds 0000 Logik 0072 MEI 0035 MGA 0240, 0043 MGN Technology 0240 MTC 0240, 0000 Magnasonic 1278 Magnavox 0035, 0039, 0081, 0000, 0563, 1781 Magnin 0240 Marantz 0035, 0081 Marta 0037 Matsushita 0035, 0162, 0454 Memorex 0035, 0162, 0037, 0048, 0039, 0047, 0240, 0000, 0104, 0209, 0454, 0479, 1037, 1162, 1237, 1262 Minolta 0042 Mitsubishi 0067, 0043, 0807 Motorola 0035, 0048

Page 30

Setup Codes For VCRs (continued)
Multitech NEC Nikko Noblex Olympus Optimus Orion Panasonic Penney Pentax Philco Philips Pilot Pioneer Polk Audio Profitronic Proscan Protec Pulsar Quasar RCA RadioShack Radix Randex Realistic ReplayTV Runco STS Samsung Sanky Sansui Sanyo Scott Sears Semp Sharp Shintom Shogun Singer Sonic Blue Sony Sylvania Symphonic 0000, 0072 0104, 0067, 0041, 1062, 0162, 0037, 0048, 0104, 0432, 0454, 1048, 1162, 1262 0184, 0209, 0002, 0479, 1479 1062, 0035, 0162, 0225, 0454, 0616, 1035, 1162, 1262 0035, 0037, 0240, 0042, 0038, 1035, 0035, 0209, 0479 0035, 0081, 0618, 0749, 1081, 0240 0060, 0760, 0039 0035, 0162, 0454, 1035, 1162 0060, 0240, 0042, 0760, 0807, 1035, 1060 0000, 0037 0035, 0037, 0048, 0047, 0000, 0104 0614, 0042 0240, 0045 0048, 0039 0000, 0067, 0209, 0041, 0479, 1479 0047, 0240, 0104 0184, 0045, 0121, 0043 0035, 0037, 0047, 0000, 0042, 0104, 0048, 0807, 0614, 0616 0035, 0032, 0000, 0033, 0636, 1032, 1232 0035, 0081, 0000, 0043, 1781 0000

Page 31

TMK Tatung Teac Technics Teknika Thomas Tivo Toshiba Totevision Unitech Vector Vector Research Video Concepts Videomagic Videosonic Villain Wards White Westinghouse XR-1000 Yamaha Zenith
0000, 0041 0035, 0162 0035, 0037, 0618, 0636 0045, 0043, 0845 0037, 0060, 0035, 0048, 0047, 0081, 0240, 0000, 0042, 0072, 0760 0209, 0072, 1278 0035, 0000, 0039, 0000, 0209, 0033, 0479, 1479

TROUBLESHOOTING

PROBLEM:
LED (red light) does not blink when you press a key.
SOLUTION: Replace batteries with two new AA alkaline batteries. PROBLEM:
LED blinks when you press a key, but home entertainment device does not respond.
SOLUTION: Make sure the remote control is aimed at your home entertainment device and is not farther than 15 feet away. PROBLEM: The unit does not control home entertainment devices or commands are not working properly.
SOLUTION: Try all listed codes for the device brands being set up. Make sure they can be operated with an infrared remote control.

Page 32

TROUBLESHOOTING (continued)
PROBLEM: DVD/VCR Combo does not respond properly.
SOLUTION: Use the VCR codes for your brand. Some combo units may require both a DVD code and a VCR code for full operation. PROBLEM: Changing channels does not work properly.
SOLUTION: If the original remote control required pressing ENTER to change channels, then press ENTER on the remote control after entering the channel number. PROBLEM: Tried Search For Your Code method and still could not find a working code.
SOLUTION: Clear the device key as follows: Press and hold SET until the LED (red light) blinks twice, then release. Next enter 9 - 9 - 2. Then press the device key to be cleared twice. Now repeat the Search For Your Code method on page 11. PROBLEM: Remote control does not turn on Sony or Sharp TV/VCR Combo.
SOLUTION: For power on, these products require programming TV codes. For Sony, use TV code 0000 and VCR code 0032. For Sharp, use TV code 0093 and VCR code 0048. PROBLEM:
CH+ and CH- do not work for your
RCA TV. SOLUTION: Due to RCA design (1983-1987), only the original remote control will operate these functions. PROBLEM: No remote control of volume. SOLUTION: See Changing Volume Lock on page 16 to lock/unlock volume.

Page 33

ABOUT UPGRADING
The One For All 6-Device PVR Universal Remote Control has the largest infrared code library available. However, if you purchase a brand new home entertainment device, it may not respond to the codes stored in the remote controls memory. If this happens, please contact our Customer Support department (see Customer Support on the next page) to upgrade the remote control. The Customer Support representative will search our entire database for a code that matches your device and instruct you how to enter it into your One For All 6-Device PVR Universal Remote Control. If the code for your home entertainment or home automation device is not in our database, we will need to capture the code for that device from its original remote control. A new code would then be created and need to be entered into your One For All 6-Device PVR Universal Remote Control. If necessary, the Customer Support representative can instruct you how to begin the capture procedure.
NOTE: One For All reserves the right to replace a returned remote control with a new one of equal or superior functionality.

Upgrade Exclusions

Home entertainment devices controlled by radio frequency (RF/UHF), wired, or ultrasonic remote controls. Only devices controlled by infrared remote controls are covered. Home entertainment devices not controlled by remote controls. Broken or defective product. Products that operate over 100 kHz. Infrared keyboards and infrared pointing devices (such as mouse substitutes). All products for sale and/or use outside the continental United States,Hawaii,Alaska,or Canada.

Page 34

CUSTOMER SUPPORT
For assistance, please contact us in any of the following ways: E-mail: ofasupport@ueic.com Internet: http://www.oneforall.com Consumer Help Line: (330) 405-8615

INSTRUCTIONS TO THE USER

This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide a reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiated radio frequency energy and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet or a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help

Page 35

LIMITED WARRANTY
One For All (OFA) warrants, to the original purchaser only, that this product will be free from defects in materials and workmanship, under normal use, for ninety (90) days from the date of original purchase. This warranty does not cover damage or failures caused by products or services not supplied by OFA, or which result from accident, misuse, abuse, neglect, mishandling, misapplication, faulty installation, set-up adjustment, improper maintenance, alteration, maladjustment of consumer controls, modifications, commercial use, or that is attributable to acts of God. There are no express warranties except as listed above. OFA SHALL NOT BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF THIS PRODUCT OR ARISING OUT OF ANY BREACH OF WARRANTY.ALL EXPRESS AND IMPLIED WARRANTIES, INCLUDING THE WARRANTIES OF MERCHANT-ABILITY AND FITNESS FOR A PARTICULAR PURPOSE,ARE LIMITED TO THE WARRANTY PERIOD SET FORTH ABOVE. Some states do not allow the exclusion or limitation of incidental or consequential damages, or limitations on how long an implied warranty lasts, so the above exclusions or limitations may not apply to you. This warranty gives you specific legal rights and you may also have other rights which vary from state to state. To obtain warranty service for a defective product during the warranty period, please return the product, preferably in the original carton, along with your purchase receipt, to the store of original purchase. A note detailing the complaint would be helpful. The store, at its option, will replace or repair this product if found to be defective. One For All: (330) 405-8655 URC-6131 Feb. 2003

Page 36

ADDITIONAL INFORMATION
As you update your home entertainment system, One For All has a universal remote control that will fit your needs. Look for these exciting products at a retailer near you. One For All Access 3. URC-3605 One For All Big Easy 3-Device. URC-3300 One For All Video Expert 4-Device. URC-4041 One For All Big Easy 4-Device. URC-4330 One For All Access 4. URC-4605 One For All Access 5. URC-5705 One For All PVR 6-Device. URC-6131 One For All 6-Device Home Theater. URC-6011 One For All 8-Device Home Theater. URC-8011 One For All 8L-Device Home Theater With Learning. URC-8811 One For All A/V LCD 8 Device With Learning. URC-8910 One For All IR/RF LCD 8 Device With Learning. URC-9910 One For All 8 Device Home Theater Remote Powered By Kameleon. URC-9960 ONE FOR ALL is the registered trademark of Universal Electronics Inc. Computime International Ltd. is the Licensee of the ONE FOR ALL brand for USA and Canada. Copyright 2003 by Universal Electronics Inc. No part of this publication may be reproduced, transmitted, transcribed, stored in any retrieval system, or translated to any language, in any form or by any means, electronic, mechanical, magnetic, optical, manual, or otherwise, without the prior written permission of Universal Electronics Inc. The One For All 6-Device PVR Universal Remote Control is compatible for use in North America, excluding Mexico.