Reviews & Opinions
Independent and trusted. Read before buy ONE FOR All Urc 6012!

ONE FOR All Urc 6012

Manual

Preview of first few manual pages (at low quality). Check before download. Click to enlarge.
Manual - 1 page 

Download (English)
ONE FOR All Urc 6012, size: 200 KB
Instruction: After click Download and complete offer, you will get access to list of direct links to websites where you can download this manual.

About

ONE FOR All Urc 6012About ONE FOR All Urc 6012
Here you can find all about ONE FOR All Urc 6012 like codes and other informations. For example: manual.

ONE FOR All Urc 6012 manual (user guide) is ready to download for free.

On the bottom of page users can write a review. If you own a ONE FOR All Urc 6012 please write about it to help other people.

 

[ Report abuse or wrong photo | Share your ONE FOR All Urc 6012 photo ]

User reviews and opinions

<== Click here to post a new opinion, comment, review, etc.

No opinions have been provided. Be the first and add a new opinion/review.

 

Documents

doc0

Use CH+ (or CH-) to select the next higher (or lower) channel.

TV Code: VCR Code:

USING THE HOME THEATER MODE
The One For All 6 Device Home Theater Universal Remote Control includes a custom Home Theater mode. After the HOME THEATER key is programmed, it will allow you to access five groups of remote control keys without having to change device modes.
Example Programming A Favorite Channel
With so many channels available through your cable or satellite system provider, you can program a macro that directly selects a favorite channel with one key press. For example, lets assume your favorite cable programs are on channel 71. Use the following instructions to program a macro for direct access of this channel:
NOTE: This example assumes the TV tuner is connected directly to the cable line and not through a cable box.

USING KEYMOVER

The One For All 6 Device Home Theater Universal Remote Control includes a Keymover feature that allows you to map (or copy) keys from one mode (i.e., source mode) to another mode (i.e., destination mode).
NOTE: The following keys cannot be used as a source or destination: TV, VCR, DVD, SAT, HOME THEATER, CBL, RCVR/AMP, and SET.
Unlocking Volume Control For A Single Device (Individual Volume Unlock):
1. After performing Global Volume Lock (above), press and hold SET again until the LED (red light) blinks twice, then release SET. 2. Press a desired mode key where you want volume to be unlocked (e.g., RCVR/AMP) and controlled within its own mode. 3. Enter 9 - 9 - 3 and then press VOL once. The LED will blink four times. 4. If desired, repeat steps 1 through 3 (of this section) for each device that you want volume to be unlocked. 5. Now, after you select a device that has volume unlocked (e.g., RCVR/AMP), pressing VOL+, VOL, or MUTE, will control the devices volume only in its own mode.

PROBLEM:

No remote control of volume.
SOLUTION: See Changing Volume Lock to lock/unlock volume.

6 DEVICE HOME THEATER

UNIVERSAL REMOTE CONTROL
Press PREV once to recall the last-viewed channel and to page back one screen on the main menu. In the RCVR/AMP mode, use PREV to select the receiver band. Use the keypad (1 ~ 9 and 0) to directly select channels (for example, 009 or 031).
DVD Code: SAT Code: CBL Code: RCVR/AMP Code:

CUSTOMER SUPPORT

For assistance, please contact us in any of the following ways: E-mail: ofasupport@ueic.com Internet: http://www.oneforall.com Consumer Help Line: (330) 405-8615

Control Organization

About Control Groups
For Home Theater programming, the remote controls keys are grouped by type of control into the following five control groups: (1) Transport Controls: (2) Volume Controls: (3) Channel Controls: PLAY, STOP, FWD, REW, PAUSE, and REC VOL+, VOL-, and MUTE CH+, CH-, (Keypad) 0 ~ 9, ENTER, LAST, SLEEP, INFO, and TV/VCR MENU, GUIDE, Cursor Controls (Up, Down, Left, Right), SELECT, and EXIT PIP, MOVE, and SWAP

Programming Keymover

For example, if your VCR does not have volume control, you can map the volume and mute keys from the TV mode to the VCR mode as follows: 1. Press and hold SET until the LED (red light) blinks twice, then release SET. 2. Enter 9 - 9 - 4. The LED will blink twice. 3. For the source mode, press TV once. 4. For the source key, press VOL+ once. 5. For the destination mode, press VCR once. 6. For the destination key, press VOL + once. 7. The LED will blink twice indicating the keymoved sequence is correct. 8. Repeat steps 1 through 7 twice more, substituting VOL and MUTE as source and destination keys in steps 4 and 6. Upon completion of the above procedure, you can now use your One For All 6 Device Home Theater Universal Remote Control to control the TVs volume and mute in the VCR mode, as well as in the TV mode.
1. Press and hold SET until the LED (red light) blinks twice, then release SET. 2. Enter 9 - 9 - 5. The LED will blink twice. 3. Press MACRO once. 4. Press TV once. 5. Enter the channel number, 7 - 1.
NOTE: If you have access to over 100 channels, enter 0 -7 -1. Moreover, if the original remote control required pressing an Enter key to change the channel, also press the Enter key after the channel number (e.g., 0 -7 -1-Enter).

LIMITED WARRANTY

One For All warrants, to the original purchaser only, that this product will be free from defects in materials and workmanship, under normal use, for ninety (90) days from the date of original purchase. This limited warranty is valid only on ONE FOR ALL product purchased and used in the United States of America or Canada, and does not apply to products used for industrial or commercial purpose. The limited warranty does not cover damage or failure caused by products or services not supplied by ONE FOR ALL , or which result from accident, misuse, abuse, neglect, mishandling, misapplication, faulty installation, set-up adjustment, improper maintenance, alteration, maladjustment of consumer controls, modifications, commercial use, or that is attributable to acts of God. There are no express warranties except as listed above. ONE FOR ALL SHALL NOT BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF THIS PRODUCT OR ARISING OUT OF ANY BREACH OF WARRANTY. ALL EXPRESS AND IMPLIED WARRANTIES, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE,ARE LIMITED TO THE WARRANTY PERIOD SET FORTH ABOVE. Some states do not allow the exclusion or limitation of incidental or consequential damages, or limitations on how long an implied warranty lasts, so the above exclusions or limitations may not apply to you. This warranty gives you specific legal rights and you may also have other rights which vary from state to state. To obtain warranty service for a defective product during the warranty period, please return the product, preferably in the original carton, along with your purchase receipt, to the store of original purchase.A note detailing the complaint would be helpful. The store, at its option, will replace or repair this product if found to be defective. One For All (330) 405-8655

ND SOU ND

In the RCVR/AMP mode, use the keypad (1 ~ 9 and 0) to select audio sources 1 through 10. Press ENTER once after entering the channel numbers on some TVs. Use TV/VID to switch the TVs input to view TV or video programs. Use the transport keys to control your VCR, DVD player, or VOD (Video On Demand) if available on your cable or satellite service. To record a VCR program, press REC twice. After programming, press MACRO once to run a desired macro (see Using A Macro). Use PIP to switch the Picture-In-Picture feature on or off (if available on your TV). Use MOVE to move the window picture to different positions in the main picture.

Unlocking All Volume Control (Restoring Default Setting):
NOTE: Performing these instructions will restore independent volume control for all programmed devices (e.g., TV volume control in TV mode, VCR volume in VCR mode, etc.).
PROGRAMMING TV/VCR COMBO CONTROL
Perform the following instructions to control a TV/VCR Combo: 1. Turn on the TV/VCR Combo and insert a video cassette.
NOTE: Please read steps 2 through 4 completely before proceeding. Highlight or write down the codes and device you wish to program before starting step 2.
(4) Menu Controls: (5) PIP Controls:

About Device Groups

1. On the remote control, press and hold SET until the LED (red light) blinks twice, then release SET. 2. Enter 9 - 9 - 3 and then press VOL+ once. The LED will blink four times. 3. Volume will again be independently controlled according to its default states for all programmed devices.
Moreover, the remote controls devices are grouped into the following five device groups: (1) Device Group 1: (2) Device Group 2: (3) Device Group 3: (4) Device Group 4: (5) Device Group 5: (1) Device Group 1: (2) Device Group 2: (3) Device Group 3: (4) Device Group 4: (5) Device Group 5: VCR, DVD, and RCVR/AMP TV, VCR, CBL, SAT, and RCVR/AMP TV, VCR, CBL, SAT, and RCVR/AMP TV, VCR, CBL, SAT, and DVD TV VCR TV CBL CBL TV
6. Press and hold SET until the LED blinks twice, then release SET. Now when you press MACRO, you will instantly see cable channel 71 on your TV set.
2. On the remote control, press VCR. 3. Press and hold SET until the LED (red light) blinks twice, then release SET. 4. Use the Setup Codes For TV/VCR Combos (on the back) to locate the brand name and then enter the first four-digit code for your device. If performed correctly, the LED will blink twice.
NOTE: If the LED did not blink twice, repeat steps 2 through 4 and try entering the same code again.
Example Programming A Master Power Key With Instant Channel Selection
A macro can be programmed to turn on and off your equipment as well. For example, lets set up a sequence that will turn on the TV and tune it to channel 3, and then turn on the Cable Box and tune it to a premium channel (e.g., 11).
NOTE: This example assumes all equipment is turned off and that the TV is connected through the cable box with TV tuning set to channel 3.

ABOUT UPGRADING

The One For All 6 Device Home Theater Universal Remote Control has the largest infrared code library available. However, if you purchase a brand new home entertainment or home automation device, it may not respond to the codes stored in the remote controls memory. If this happens, please contact our Customer Support department (see Customer Support on the right) to upgrade the remote control. The Customer Support representative will search our entire database for a code that matches your device and instruct you how to enter it into your One For All 6 Device Home Theater Universal Remote Control. If the code for your home entertainment or home automation device is not in our database,we will need to capture the code for that device from its original remote control. A new code would then be created and entered into your One For All 6 Device Home Theater Universal Remote Control.If necessary,the Customer Support representative can instruct you how to begin the capture procedure.

NOTE: One For All reserves the right to replace a returned remote control with a new one of equal or superior functionality.
The default Device Group setting from the factory is:
Restoring Keymoved Keys to Default Settings
Restoring A Single Keymoved Key

USERS GUIDE

Use SWAP to switch images and sound between the main and window pictures. Press SLEEP to activate your devices sleep timer (not available for all devices).
5. Aim the remote control at the device and press POWER once. It should turn off. If the device does not respond, repeat steps 2 through 5, trying each code for your brand until you find one that works. If it still does not work, try Searching For Your Code.
NOTE: If the device does not have a POWER key, press the (Play) key.
1. Press and hold SET until the LED (red light) blinks twice, then release SET. 2. Enter 9 - 9 - 5. The LED will blink twice. 3. Press MACRO once. 4. Enter the following sequence: TV, POWER, and 0 - 3 (or 0 -0 - 3 if access is over 100 channels)
NOTE: If the original remote control required pressing an Enter key to change the channel, also press the Enter key after the channel number (e.g., 0 -7 -1-Enter).
1. Press a device key that has a keymoved key. 2. Press and hold SET until the LED (red light) blinks twice, then release SET. 3. Enter 9 - 9 - 4. The LED will blink twice. 4. Press the destination key twice (where the keymoved key is stored). The LED will blink twice.
Restoring All Keymoved Keys In A Single Mode

INTRODUCTION

The One For All 6 Device Home Theater Universal Remote Control is designed to operate up to six home entertainment devices, including TV, video, and audio components. The remote control requires two (2) new AA alkaline batteries (not included) and easy programming to control your devices. For best results, please read and perform all instructions listed here.Also, keep these instructions for future reference.
Use to turn on or off the key backlight. When this feature is activated, keys will remain backlight for 5 seconds after the last key press. Use SET for all programming sequences.
6. If youve located a setup code that works, but it has a separate TV code, youll also need to program it into the remote control to access volume control as follows: a. Press TV once. The LED (red light) will blink twice. b. Enter the TV code for your TV/VCR Combo. If correct, the LED will blink twice.
NOTE: For VCR/TV Combos programmed with separate TV codes, TV volume is controlled by pressing VCR first and then TV. After that, use VOL+ (or VOL-) to raise (or lower) the TV volume. For other alternatives on controlling your volume keys, see the Changing Volume Lock or Using Keymover sections.

Programming The Home Theater Mode
For example, lets assume you have a TV, a cable box, and a VCR in your home theater system.You can set up the Home Theater mode so that selected controls are assigned to these devices as follows: 1. On the remote control, press HOME THEATER. 2. Press and hold SET until the LED (red light) blinks twice, then release SET. 3. Enter 9 - 7 - 9. The LED will blink twice. 4. Select a device. For this example, press VCR once. Then assign a desired Control Group to the device. For this example, press PLAY once, which will assign the entire group of Transport Controls (i.e., PLAY, STOP, FWD, REW, PAUSE, and REC) to the VCR. The LED will blink once. 5. Select another device. For this example, press TV once. Then assign a desired Control Group to this device. For this example, press VOL+ once, which will assign the entire group of Volume Controls (i.e., VOL+, VOL-, and MUTE) to the TV. The LED will blink once. 6. Select another device. For this example, press CBL once. Then assign a desired Control Group to this device. For this example, press CH+ once, which will assign the entire group of Channel Controls (i.e., CH+, CH-, (Keypad) 0 ~ 9, ENTER, LAST, SLEEP, INFO, and TV/VCR) to the Cable Box. The LED will blink once. 7. To add additional Menu functionality to the Cable Box, press CBL once. Then press MENU once. This action will assign the entire group of Menu Controls (i.e., MENU, GUIDE, Cursor Controls (Up, Down, Left, Right), SELECT, and EXIT) to the Cable Box. The LED will blink once. 8. To add PIP functionality to the TV, press TV once. Then press PIP once. This action will assign the entire group of PIP Controls (i.e., PIP, MOVE, and SWAP) to the TV. The LED will blink once. 9. To exit Home Theater programming, press and hold SET until the LED (red light) blinks twice, then release SET.
1. Press and hold SET until the LED (red light) blinks twice, then release SET. 2. Enter 9 - 9 - 4. The LED will blink twice. 3. Press the destination mode twice (where keymoved keys are stored). The LED will blink twice.
5. Then enter the following sequence: CBL, POWER, and 1-1 (or 0 -1- 1 if access is over 100 channels) 6. Press and hold SET until the LED blinks twice, then release SET. Now when you press MACRO once, the TV will turn on and tune to channel 03. Then the cable box will turn on and tune to channel 11.

Upgrade Exclusions

INSTALLING BATTERIES FEATURES AND FUNCTIONS
Use the Key Charts (below) to learn how to use the universal features and functions of the One For All 6 Device Home Theater Universal Remote Control. 1. On the remote controls back, push the tab and lift off the battery cover. 2. Obtain two (2) new AAA alkaline batteries. Match the + and marks on the batteries to the + and marks in the battery case, then insert the new batteries. 3. Press the battery cover back into place. The tab should click when the cover is locked. 4. Test the remote control by first pressing POWER and then any mode key (e.g., TV). If batteries are inserted correctly, the LED (red light) will blink once.
NOTE: When batteries need replacement, the remote control will stop operating. Remove the old batteries and insert new ones within 30 minutes to ensure all of your programming information is restored.
7. For future reference, write down the working TV/VCR combo code in the below boxes: TV/VCR Code: TV Code (if used):

Clearing A Macro

1. Press and hold SET until the LED (red light) blinks twice, then release SET. 2. Enter 9 - 9 - 5. The LED will blink twice. 3. Press MACRO once. 4. Press and hold SET until the LED blinks twice, then release SET.

RE-ASSIGNING DEVICE KEYS

The One For All 6 Device Home Theater Universal Remote Control can be set to control a second TV,VCR, DVD player, or other device. For example, to control a TV, a cable box, and two VCRs, you will need to re-assign the unused DVD key to operate the second VCR as follows: 1. On the remote control, press and hold SET until the LED (red light) blinks twice, then release SET.
Home entertainment or home automation devices controlled by radio frequency (RF/UHF), wired, or ultrasonic remote controls. Only devices controlled by infrared remote controls are covered. Home entertainment or home automation devices not controlled by remote controls. Broken or defective product. Products that operate over 100 kHz. Infrared keyboards and infrared pointing devices (such as mouse substitutes). All products for sale and/or use outside the continental United States, Hawaii,Alaska, or Canada.

ADDITIONAL INFORMATION

As you update your home entertainment system, One For All has a universal remote control that will fit your needs. Look for these exciting products at a retailer near you. One For All Access 3..URC-3605 One For All Video Expert 4 Device..URC-4081 One For All Video Expert Plus 4L...URC-4880 One For All Access 4..URC-4605 One For All Access 5..URC-5705 One For All 6 Device Home Theater..URC-6011 One For All 8 Device Home Theater..URC-8011 One For All 8L Device Home Theater with Learning Capability..URC-8811 One For All A/V LCD 8 Device With Learning.URC-8910 One For All IR/RF LCD 8 Device With Learning.URC-9910 ONE FOR ALL is the registered trademark of Universal Electronics Inc. Computime International Ltd. is the Licensee of the ONE FOR ALL brand for USA and Canada. Copyright 2002 by Universal Electronics Inc.No part of this publication may be reproduced,transmitted,transcribed,stored in any retrieval system,or translated to any language,in any form or by any means, electronic,mechanical,magnetic,optical,manual,or otherwise,without the prior written permission of Universal Electronics Inc. The One For All 6 Device Universal Remote Control is compatibile for use in North America, excluding Mexico. URC-6011/6012w 02/02

Key Charts

The LED (red light) blinks to show that the remote control is working and is sending signals. Press TV, VCR, DVD, SAT, CBL, or RCVR/AMP once to select a desired home entertainment device to control. After programming, press HOME THEATER once to select the home theater mode (see Using The Home Theater Mode). Press POWER once to turn on or off the selected device. Press MENU once to display your selected devices main menu. Use GUIDE to display your selected devices program guide or setup menu. Use EXIT to exit from your selected devices guide or menu. Use INFO to display the current channel and program information.

SEARCHING FOR YOUR CODE

If your device does not respond to the remote control after trying all codes listed for your brand, or if your brand is not listed at all, try searching for your code. For example, to search for a code for your TV: 1. On the remote control, press TV once. 2. Press and hold SET until the LED (red light) blinks twice, then release SET.

USING CHANNEL SCAN

In the TV, VCR, DVD, SAT, and CBL modes, use the FAV key to start a 3-second scan of all favorite channels (if programmed see Programming Favorite Channel Scan below) and/or all channels for the selected mode. 1. If Favorite Channel Scan has been set up, skip to step 2. Otherwise, press TV, VCR, DVD, SAT, or CBL once. 2. Press FAV once. If Favorite Channel Scan has been set up, scanning of favorite channels will start and, upon completion, continue to scan all channels upward for the same device. If Favorite Channel Scan has not been set up, scanning will start with the current channel, then proceed to the next channel up, and continue until all channels of the selected device is scanned. 3. To stop scanning channels at any time, press any key once (except the backlight key ).

2. Enter 9 - 9 - 2. The LED will blink twice. 3. Press VCR once, then press DVD once. 4. The AUX key is now ready to be programmed for your second VCR. See Programming Device Control. To re-assign other device keys to the DVD key, repeat steps 1 through 4 above by substituting the sequence from the below chart:

TROUBLESHOOTING

PROBLEM: PROBLEM: LED (red light) does not blink when you press a key. LED blinks when you press a key, but home entertainment device does not respond. SOLUTION: Replace batteries with two new AA alkaline batteries.
PROGRAMMING DEVICE CONTROL
The One For All 6 Device Home Theater Universal Remote Control is preprogrammed at the factory to operate an RCA TV and VCR, a Motorola (GI) cable box, an RCA satellite receiver, a Toshiba DVD player, and a Pioneer audio receiver/ amplifier. To control devices other than the default brands, perform the following steps; otherwise skip this section:
NOTE: For TV/VCR Combo control, see the next section.
3. Enter 9 - 9 - 1. The LED will blink twice. 4. Aim the remote control at the the TV and slowly alternate between pressing POWER and TV. Stop when the TV turns off.
NOTE: In the search mode, the remote control will send IR codes from its library to the selected device, starting with the most popular code first.

To Re-Assign Device Key

DVD as 2nd TV key: DVD as 2nd SAT key: DVD as 2nd CBL key: DVD as 2nd RCVR/AMP key:

Perform Sequence

SET - 9 - 9 - 2 - TV - DVD SET - 9 - 9 - 2 -SAT- DVD SET - 9 - 9 - 2 -CBL- DVD SET - 9 - 9 - 2 - RCVR/AMP - DVD
SOLUTION: Make sure the remote control is aimed at your home entertainment device and is not farther than 15 feet away. PROBLEM: The unit does not control home entertainment devices or commands are not working properly.
5. To lock in the code, press and hold SET until the LED blinks twice, then release SET. 6. To search for the codes of your other devices, repeat steps 1 through 5, but substitute the appropriate device key for the device you are searching for.
Operating The Home Theater Mode
After programming the Home Theater key (see the previous section), you simply activate this mode by pressing HOME THEATER once. Instantly, groups of remote control keys will be assigned to their programmed devices. For the above example, pressing HOME THEATER once would assign the following keys to the VCR, TV, and Cable Box:

1. Turn on a device (e.g.,VCR or DVD player) and, if applicable, insert media (e.g., cassette or disc).
You can also re-sassign another unused device key by substituting an open key for the DVD key in the above chart and performing the sequence. For example, to re-assign an unused SAT key as a second VCR key, perform SET - 9 - 9 - 2 - VCR - SAT. When a re-assignment is done, the LED (red light) will blink twice to confirm your choice.At that time, you will need to program the remote control for the new device (see Programming Device Control).
SOLUTION: Try all listed codes for the device brands being set up. Make sure they can be operated with an infrared remote control. PROBLEM: TV/VCR combo does not respond properly. SOLUTION: Use the VCR codes for your brand. Some combo units may require both a TV code and a VCR code for full operation. PROBLEM: Changing channels does not work properly. SOLUTION: If original remote control required pressing ENTER to change channels, press ENTER on the remote control after entering the channel number. PROBLEM: Tried Search For Your Code method and still could not find a working code.
Use the cursor keys to move the cursor in the program guide and menu screens. Use SELECT to choose options from your selected devices menu or guide. In the RCVR/AMP mode, use SELECT to set the surround sound. Use v (or w) to adjust the volume higher (or lower). Use (or ) to adjust the balance left (or right).
2. On the remote control, press a device key once (i.e., TV, VCR, DVD, SAT, CBL, or RCVR/AMP).
NOTE: Use the SAT or CBL key to program control of video accesories. Use the RCVR/AMP key to program control of CD players, miscellaneous audio devices, or home automation devices.

CHECKING THE CODES

If you have set up the remote control using the Searching For Your Code procedure, you may need to find out which four-digit code is operating your equipment. For example, to find out which code is operating your TV: 1. On the remote control, press TV once. 2. Press and hold SET until the LED (red light) blinks twice, then release SET. 3. Enter 9 - 9 - 0. The LED will blink twice. 4. To view the code for the first digit, press 1 once.Wait 3 seconds, count the LED blinks (e.g., three blinks = 3) and write down the number.
NOTE: If a code digit is 0, the LED will not blink.

VCR: TV: Cable Box:

PLAY, STOP, FWD, REW, PAUSE, and REC VOL+, VOL-, MUTE, PIP, MOVE, and SWAP CH+, CH-, (Keypad) 0 ~ 9, ENTER, LAST, SLEEP, INFO, TV/VCR, MENU, GUIDE, Cursor Controls (Up, Down, Left, Right), SELECT, and EXIT

PROGRAMMING FAVORITE CHANNEL SCAN
In the TV, VCR, DVD, SAT, or CBL mode, you can store a list of up to 10 favorite channels, in any order, that will be immediately scanned when FAV is pressed (see Using Channel Scan).
NOTE: Only channels of one mode can be stored for Favorite Channel Scan.

CHANGING VOLUME LOCK

The One For All 6 Device Home Theater Universal Remote Control is set at the factory for independent volume control of each selected device. However, you may change the Volume Lock setting to Global Volume Lock so that a devices volume will be locked to one mode (e.g., to control TV volume in all other modes).After that, if desired, you can perform Individual Volume Unlock on a selected device to set its volume control for independent operation.
3. Press and hold SET until the LED (red light) blinks twice, then release SET. 4. Use the Manufacturers Codes (on the back) to locate the type of device and brand name and then enter the first four-digit code for your device. If performed correctly, the LED will blink twice.
1. On the remote control, press TV, VCR, DVD, SAT, or CBL once.
Use VOL+ (or VOL-) to raise (or lower) the sound volume.
Press MUTE once to turn the sound off or on. In TV, VCR, DVD, SAT, and CBL modes, use FAV to scan favorite channels and/or all channels. See Using Channel Scan and Programming Favorite Channel Scan.

USING A MACRO

With programming, the MACRO key on your One For All 6 Device Home Theater Universal Remote Control can be setup to perform a repetitive, time-consuming operation for easy, convenient access through the press of a single key. A macro can be used to control a home theater operation, to set a favorite channel, or for other multiple functions you would like to control with one key press (see examples below). Moreover, the MACRO key can hold up to 15 key presses total.
NOTE: Programming a new macro over an existing one will erase the original macro.
2. Press and hold SET until the LED (red light) blinks twice, then release SET. 3. Enter 9 - 9 - 6. The LED will blink twice. 4. Use the keypad to enter a favorite channel number (e.g., 031). Then press SET once.
NOTE: If the original remote control required pressing an Enter key to change the channel, also press the Enter key after the channel number (e.g., 0 -3-1-Enter).

SOLUTION: Clear the device key as follows: Press and hold SET until the LED (red light) blinks twice, then release. Next enter 9 - 9 - 2. Then press the device key to be cleared twice. Now repeat the Search For Your Code method. PROBLEM: Remote control does not turn on Sony or Sharp TV/VCR Combo.
5. Aim the remote control at the device and press POWER once. The device should turn off. If it does not respond, repeat steps 2 through 5, trying each code for your brand until you find one that works. If it still does not work, try Searching For Your Code.
Locking Volume Control To One Mode (Global Volume Lock):
1. Press and hold SET until the LED (red light) blinks twice, then release SET. 2. Enter 9 - 9 - 3 and then press any mode key once (e.g., TV). The LED will blink twice. 3. Now, when you press VOL+, VOL, or MUTE, the volume of the selected device (e.g., TV) will be controlled regardless of the mode you have selected.
5. Repeat step 4 three more times for remaining digits. Use 2 for the second digit, 3 for the third digit, and 4 for the fourth digit. 6. To check for codes of other devices, repeat steps 1 through 5, but substitute the appropriate device key for each device you are checking.
5. If desired, repeat step 4 (in this section) for each favorite channel to be stored, up to a total of 10 channels.
NOTE: If you try entering more than 10 channels, the remote control will automatically exit programming.
6. Repeat steps 1 through 5 for each device you want to control. For future reference, write down each working device code in the following boxes:
SOLUTION: For power on, these products require programming TV codes. For Sony, use TV code 0000 and VCR code 0032. For Sharp, use TV code 0093 and VCR code 0048. PROBLEM: CH+ and CH- do not work for your RCA TV. SOLUTION: Due to RCA design (1983-1987), only the original remote control will operate these functions.
6. To exit programming, press and hold SET for 3 seconds. The LED will blink twice.

 

Tags

DSX-40 KR-575 GC3332 P4B533-M System AQV12ewan TX-DS676 2 1 HVL-20DMA HQ8290 450 PRO 14PV405 YZ250-2005 RM120 Sdrh40 HT-X200T BDP-N460 G2420 Urc-7200 TH-42PX70E 249-4 351-14 DSC-S500 MRV-F409 Plantronics S12 350 360 ECR 5200 GM-X354 Fuel Flow CQ-5400U Argos HP2051F EMS2320X Impressa F9 RH4820 T785 HD SW1000XG M2094D-PZ E-V 66 XTZ125-2007 42WS90E3 VPL-EX1 DC759KA Kxtg2511FX DPX701U WD-13481 TP TXP50VT20E TX-DS939 Digital Sport CX5900 MS-6380 Wtxg55 Bandai 2 WD-1435RD MPA 5 DPF-D75 Drive CG1400 Dremel 1680 Ge R-26ST AWH65 KDC-V7521 Singer 2263 Sd700 Fieldpac Deere 4200 Enterprise System Manual X500-10Q R3 1 32HIZ22 D26441 KX-TG2208 NA-16VX1 AV-D30 Meglio AR-404 BF-030 W 47PFL9732D Microverb XR-4790 Singer 4525 Mouse WS-32Z306T SUB-zero 501R 3211 VTS W10000 F-Z93 LE40R76B Fo-780 Impuls Intercom Conditioner DVP-SR500H PLG150-VL Silver DSC-S500 WM-12225FD

 

manuel d'instructions, Guide de l'utilisateur | Manual de instrucciones, Instrucciones de uso | Bedienungsanleitung, Bedienungsanleitung | Manual de Instruções, guia do usuário | инструкция | návod na použitie, Užívateľská príručka, návod k použití | bruksanvisningen | instrukcja, podręcznik użytkownika | kullanım kılavuzu, Kullanım | kézikönyv, használati útmutató | manuale di istruzioni, istruzioni d'uso | handleiding, gebruikershandleiding

 

Sitemap

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101