Reviews & Opinions
Independent and trusted. Read before buy Sony RM-V210!

Sony RM-V210

Manual

Preview of first few manual pages (at low quality). Check before download. Click to enlarge.
Manual - 1 page  Manual - 2 page 

Download (English)
Sony RM-V210 Remote Control, size: 444 KB
Related manuals
Sony RM-V210 Annexe 1
Sony RM-V210t Annexe 1
Sony RM-V210T

Instruction: After click Download and complete offer, you will get access to list of direct links to websites where you can download this manual.

About

Sony RM-V210About Sony RM-V210
Here you can find all about Sony RM-V210 like codes and other informations. For example: remote instructions, how to program, manual.

Sony RM-V210 manual (user guide) is ready to download for free.

On the bottom of page users can write a review. If you own a Sony RM-V210 please write about it to help other people.

 

[ Report abuse or wrong photo | Share your Sony RM-V210 photo ]

User reviews and opinions

<== Click here to post a new opinion, comment, review, etc.

Comments to date: 2. Page 1 of 1. Average Rating:
christoph1 1:38am on Sunday, October 10th, 2010 
ok this is a great basic replace remote it works well with most tvs, vcr, dvd, cable boxs, it big,...
dsfinley 12:44pm on Monday, March 15th, 2010 
lost your remote or has the dog eaten it So this the the quickest and cheapest option to get you going without any hassle except i cannot find the TV ... Good value Does the job (controls TV, VCR, Freeview and DVD/HD recorder, all Sony) and costs far less than many such controllers.

Comments posted on www.ps2netdrivers.net are solely the views and opinions of the people posting them and do not necessarily reflect the views or opinions of us.

 

Documents

doc0

RM-V210 3-276-523-11 (1) US/ES

3-276-523-11(1)

Setting the Code
Follow the steps 1 and 2 below for each component you plan to use with the Commander.
Searching for the Correct Code
You can find a code number available for a component that doesnt have one in the supplied Component code numbers. Before starting the Search function Set each component to the following status so that the Search function works effectively. TV, DVD Home Theater: Power-on Other components: Power-off
* If any of these components are assigned to any of the Component Select buttons, you can set a component code using the Search function.

SET TV VCR CBL POWER

Remote Button Descriptions
Operating a DVR (Digital video recorder)
2 To change the input mode. 3 and qd To change the channel. For example, to change to channel 5, press 0 and 5 (or, press 5 and ENTER). 8 To turn on the display. 9 To bring up Master Guide. q; To clear the setting. To exit the setting menu. qg CH+: Channel up. (*PAGE+) Page up. CH: Channel down. (*PAGE) Page down. qh To operate JUMP or CHANNEL RETURN qj To call up Tivo menu. qk To call up the MENU display. ql To move the cursor upward, downward, to the left, to the right or to enter the selection. wa N: To play. m: To rewind. M: To fast-forward. zREC: To record, press N while pressing zREC. x: To stop. X: To pause.: To proceed to the previous location. >: To proceed to the next location. : To operate Flash. : To operate Flash +. ws D: (*Live TV) To bring up Master Guide. A: (*REPLAY) To replay. Or to go into REC/REVIEW mode during play. (After about 5-second rewind, replay begins.) wd PAGE+ : (*THUMBS+) To select the desired recorded program. (It is necessary to have recorded the desired program.) PAGE : (*THUMBS) To select the desired recorded program. (It is necessary to have recorded the desired program.) wf (*LIST) To call up the title of the recorded program.
Operating a digital satellite receiver
2 To switch the output of the digital satellite receiver to the TV. (When you connect a TV cable or antenna to the receiver, the output switches between a TV and SAT program.) 3, 4 and qd To change the channel. For example, to change to channel 5, press 0 and 5 (or press 5 and ENTER). 8 To turn on the display. 9 To bring up the Master Guide. q; To exit the mode. qf To call up the DISH menu. qg Channel up: + Channel down: qh To tune to the last tuned station. qj To call up the PVR menu. qk To call up the MENU display. ql To move the cursor upward, downward, to the left, to the right, or to enter the selection. w; To bring up the Station Index. wa N: m: M: zREC: To play. To rewind. To fast-forward. To record, press N while pressing zREC. x: To stop. X: To pause.: To proceed to the previous location. >: To proceed to the next location. : Replay : Advance A: RED button B: GREEN button C: YELLOW button D: BLUE button PAGE+: Page up. PAGE-: Page down. To call up the title of the recorded program. To use the FAVORITE function.
Operating a DVD Home Theater
2 To change the input mode. 3 and qd Number buttons: To set items selected on the screen. 4 To select numbers 10 and above. 6 VOL+: AMP volume up VOL: AMP volume down 7 AMP volume muting 8 To show the current play status on the screen. 9 To change the sound. q; To return to the previous screen. qf To switch the subtitle. qg CH+: Tuner + CH: Tuner qk To call up the MENU. ql To move the cursor upward, downward, to the left, to the right, or to enter the selection. w; AMP menu To play. To rewind. To fast-forward. To record, press N while pressing zREC. x: To stop. X: To pause.: To proceed to the previous location. >: To proceed to the next location. : To operate Flash. : To operate Flash +. ws B: open/ close A: To call up the setup menu. C: Disc skip D: To display the Top Menu. wg To call up MEMORY. wa N: m: M: zREC:

Remote Commander

RM-V210
Operating Instructions Manual de instrucciones (parte posterior)

2007 Sony Corporation

Printed in China
Step 1: Entering the Code Number
1 See the supplied Component code numbers, and find the four-digit code number for the desired component. If more than one code number is listed, use the number thats listed first. For example, if youre setting up a Sony TV, you would use the code number 8201. If your component isnt listed, see Searching for the Correct Code. 2 Press SET more than two seconds. The SET indicator lights up. 3 Press the button of the component that you want to set up. The SET indicator lights up. 2

SET TV VCR CBL POWER DVD

Component code numbers / Nmeros de cdigo de componentes

English

DVR (digital video recorder), SAT (digital satellite receiver), Cable box, TV, DVD Home Theater, DVD and VCR
The following tables show brand names and their corresponding code numbers.

DVR (Digital Video Recorder)/ DVR (Videograbadora digital)
Sony Humax Panasonic Philips Pioneer ReplayTV Tivo Toshiba

SET indicator

General

INPUT PIP

MUTING

RECALL

MUTING A B

PAGE GUIDE

RECALL C D
1 Press SET more than two seconds. The SET indicator lights up.
For the customers in the U.S.A. WARNING
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. You are cautioned that any changes or modifications not expressly approved in this manual could void your authority to operate this equipment.

Installing the Batteries

Before replacing the batteries, have new ones ready beforehand. Slide open the battery compartment and insert two size AA (R6) batteries (not supplied). Be sure to line up the + and on the batteries with the + and on the battery compartment.
2 Press the Component Select button for the desired component. The SET indicator lights up. 3 Press CH + or CH and POWER in turn until the component reacts as follows: TV, DVD Home Theater: Powers off Other components: Powers on Press CH + to go to the next code number. Press CH to go back to the previous code number. The SET indicator flashes once after the numbers have turned one cycle. One cycle means, for example, that the commander finishes searching all the component code numbers allocated to the component. 4 Press ENTER. The SET indicator and the Component button turn off. If the SET indicator flashes five times before turning off, it means that the setup is incomplete. Start over from Step 3. If the component does not operate properly, repeat steps 1 to 4 and search for another code. If you still cannot get the Commander to work properly, see Troubleshooting.

EXIT TOOLS

1 To set up the Commander, press SET more than two seconds. 6 Volume up: + Volume down: 7 To mute the volume on a TV or a DVD Home Theater. qa To turn on and off the power of the selected component. qs Component select buttons. Press to select a component to operate.

Tivo Code No.

3201, 3205, 3206 3202, 0413 3202, 3201, 3202 0413

ReplayTV Code No.

3203 3203, 3204

Espaol

DVR (Videograbadora digital), SAT (Sintonizador de recepcin va satlite digital), adaptador para cablevisin, Televisor, Sistema de cine domstico en DVD, DVD (reproductor de discos DVD) y Videograbadora
Las tablas que se presentan a continuacin muestran las marcas y los nmeros de cdigo correspondientes.

wd wf wg

To set a Component Code (see the instruction manual for details) Para introducir un cdigo de componente (consulte los detalles en el manual de instrucciones)
Cable box/Adaptadores para cablevisin
Sony ABC Adelphia Advanced Newhouse Altrio Americast Atlantic Broadband Bell South Blue Ridge Brigth House Cablevision Charter Comcast Cox General Instrument Gnc Hamlin Illico Jerrold Memorex Motorola NET Oak Pace Panasonic Paragon Philips Pioneer Pulsar Regal Rodgers Runco Scientific Atlanta Seren Sigecom Susquehanna Time Warner Tocom Toshiba Videotron Wideopenwest Zenith

Code No.

3107, 3103, 9002, 9003, 9004, 9005, 9006, 9007, 9008, 9018, 9022, 9043, 9022, 9023, 9024, 9025, 3103, 9002, 9003, 9004, 9005, 9006, 9007, 9008, 9018, 9022, 9043, 3103, 3110, 9027, 9028, 9019, 9020, 3104 3107, 9014, 9022, 9023, 9024, 9025, 3106 3102, 3107, 3108, 3109, 9009, 9010, 9045, 3107 9016, 9017, 3107 3105, 3107 3105, 3106, 9013
4 Press the Number buttons to enter the four-digit component code number. 5 Press ENTER. The SET indicator turns off. If the SET indicator flashes five times before lighting up, it means that the setup is incomplete. Confirm the component code number and start over from Step 4.
SAT(Digital satellite receiver)/ SAT(Sintonizador de recepcin va satlite digital)

About tactile dots

The number 5 button, the N button and CH+ each have a tactile dot for convenient use.

Specifications

Operating a DVD
2 To change the input mode. 3 and qd Number buttons : To set items selected from the screen. 4 To select numbers 10 and above. 8 To show the current play status on the screen. 9 To bring up the Master Guide. q; To return to the previous screen. qd To enter the setting. To set items selected from the screen. qf To switch the subtitle. qg CH+: Channel up. CH: Channel down. qh To select a deck. qj To switch the subtitle. qk To display the DVD menu. ql To move the cursor upward, downward, to the left, to the right, or to enter the selection. w; To call up the TOOLS menu. wa N: To play. m: To rewind. M: To fast-forward. zREC: To record, press N while pressing zREC. x: To stop. X: To pause.: To proceed to the previous location. >: To proceed to the next location. : To operate Flash. : To operate Flash +. ws B: open/ close D: To display the Top Menu. A: To call up the setup menu. wd PAGE+: To select DVD deck. PAGE-: To select HDD deck. wf To display the title menu.

Operable distance Power requirements Battery life Dimensions Mass Approx. 7 m (23 ft) (varies depending of the component of each manufacturer) Two size AA (R6) batteries (not supplied) Approx. 1 year (varies depending on frequency of button use - up to approx. 300 times per day.) Approx. 29 mm (w/h/d) (2 1/3/3/16 in.) Approx. 108 g (3.8 oz.) (not including batteries)
Brand Sony DirecTV Dish Network General Electric Hitachi Hughes Humax JVC Magnavox Panasonic Philips Proscan RCA Samsung Sylvania Toshiba Usdigital

DirecTV

Code No. 3001,3011,3012 3013, 3017, 3018, 3019, 3023, 3002, 3007, 3019 3002, 3007, 3019, 3021 3017,

Dish Network

Code No. 3010, 3014, 3025 3010, 3014

Digital TV Tuner

Code No. 3401
Note on the VOL+/- and MUTING buttons
The Commander controls or mutes the TVs volume when you select a visual component. The Commander outputs the signals to control or to mute a TV or DVD Home Theaters own volume when you have set one of these components.
When to replace the batteries
Under normal conditions, batteries will last up to one year. If the Commander does not operate properly, the batteries might be worn out. Replace the batteries with new ones.
If the code setting is not finished properly
If you do not input anything into the Commander within 20 seconds between each step, or if you press SET while setting the component code, the setup procedure will be canceled. Start over from Step 2.
* This key corresponds to Tivo service or the replay service. Refer to its
instruction manual for details.
Replace both batteries with new ones. Do not take more than 3 minutes to replace the batteries; otherwise, your setting of the code numbers will be erased.
Design and specifications are subject to change without notice.

Operating a TV

2 To change the input mode. 3, 4 and qd To change the channel. For example, to change to channel 5, press 0 and 5 (or press 5 and ENTER). 8 To display the current channel on TV. 9 To bring up Master Guide. q; To exit the menu. qf To operate the Picture-inPicture function. qg CH+: Channel up. CH: Channel down. qh To operate JUMP, FLASHBACK or CHANNEL RETURN function on the TV. qj To operate SLEEP function on the TV. qk To call up the MENU display. ql To move the cursor upward, downward, to the left, to the right, or to enter the selection. w; To call up the option menu. wa To select TV input source. ws A: VIDEO 1 B: VIDEO 2 C: VIDEO 3 D: VIDEO 4.: VIDEO 5 : VIDEO 6 : VIDEO 7 >: VIDEO 8 m: HDMI select N: HDMI 1 M: HDMI 2 zREC: Component video connection select x: Component video connection 1 X: Component video connection 2 wg To use the FAVORITE function.

Step 2: Checking if the Code Number Works
1 Power on the component you want to set up.

Operating a cable box

2 To change the input mode. 3, 4 and qd To change the channel (for example, to change to channel 5, press 0 and 5, or press 5 and ENTER). 8 To turn on the display. 9 To switch the EPG display to on/off. q; To exit the setting menu. qg CH+: Channel up. CH: Channel down. qh To toggle the current /previous channel. qk To call up the MENU display. ql To move the cursor upward, downward, to the left, to the right, or to enter the selection. wa N: m: M: zREC: To play. To rewind. To fast-forward. To record, press N while pressing zREC. x: To stop. X: To pause.: To proceed to the previous location. >: To proceed to the next location. A: To operate A button. B: To operate B button. C: To operate C button. PAGE+: Page up. PAGE-: Page down. To call up the title of the recorded program. To use the FAVORITE function.
Setting Up the Remote Commander
About Presetting the Commander
The Commander is preset at the factory to operate Sony brand components. If youre using the Commander with a Sony component, you wont need to preset the Commander before you start using it. To set up the Commander to use with other (non-Sony) manufacturers components, or to use with a component that is not preset at the factory, youll need to follow the instructions in this manual to preset the Commander with the correct code number for your components. (See the supplied Component Code Numbers also).
Component that can be preset TV VCR/Cable box/Digital satellite receiver/DVD/TV/Digital video recorder/DVD Home Theater Button TV VCR CBL DVD Factory setting Sony TV Sony VHS VCR Sony Cable box Sony DVD player
The validity of the CE marking is restricted to only those countries where it is legally enforced, mainly in the countries EEA (European Economic Area).

Notes on Batteries

Do not mix old batteries with new ones or mix different types of batteries together. If the electrolyte inside the battery should leak, wipe the contaminated area of the battery compartment with a cloth and replace the old batteries with new ones. To prevent the electrolyte from leaking, remove the batteries when you plan not to use the Commander for a long period of time.

2 Aim the Remote Commander at the component and press a button to check if that button works. For example, press the POWER button to see if it works on your component. 3 Check that the other buttons of the Commander is operating the corresponding functions of the component. You can write down the code number on the label inside the battery compartment lid. If the Commander Doesnt Seem to Be Working. First, try repeating these setup procedures using the other codes listed for your component (see the supplied Component Code Numbers). If after trying all the codes listed for your component you still cannot get the Commander to work properly, try the search method described in Searching for the Correct Code.

Operating a Component

1 Press the button of the desired component on the Commander.

TV VCR CBL DVD

Troubleshooting
If you have problems setting up or using the Commander: When setting up the Commander, carefully go through the procedures described in Setting the Code. If the code thats listed first for your component doesnt work, try all the codes for your component - in the order in which theyre listed. If all the codes fail to work (or if your component is not listed in this manual), try using the procedures in Searching for the Correct Code. Check that youre aiming the Commander directly at the component, and that there are no obstructions between the Commander and the component. Make sure the batteries youre using are not worn out, and that theyre inserted correctly. Check that the button of the TV, VCR, CBL, or DVD is pressed to choose your desired component. Check that the component has infrared remote capability. For example, if your component didnt come with a remote commander, it probably isnt capable of being controlled by a remote commander. Should any problem persist, reset the Commander to the factory setting by pressing the POWER, INPUT and VOL buttons simultaneously.
Sony Advent Aiwa Apex Broksonic Cyber Home Daewoo Denon Emerson Funai GO VIDEO Gpx Humax ILO Insignia JVC Kenwood LG Magnavox Marantz Panasonic Philips Pioneer Samsung Sansui Sharp Sylvania Symphonic Terapin Toshiba Yamaha Zenith

2 Point the Commander directly at the component. 3 Press the button for the function you want to use. See Remote Button Descriptions for complete descriptions of the buttons on the Commander.
0201, 0202, 0203, 0024, 0030, 0214 0034, 0035, 0002, 0017, 0205 0040, 0042, 0212, 0233 0046, 0227, 0230 0042, 0215 0007, 0208 0050, 0205, 0213, 0002 0012, 0221, 0231 0004, 0019, 0021, 0204 0014, 0212, 0219 0215, 0220 0040, 0218
Notes on Using the Remote Commander
Basically, use this Commander in the same way as the Commanders supplied with your components. Using this Commander will not increase the functions of your components. The functions of the Commander are limited to the functions of the components themselves. For example, if your TV does not have a MUTING function, MUTING on this Commander will not function with your TV. Some functions of the component may not work with this Commander. If your cable box can control volume, be sure to set its volume switch to a medium position. If the volume on the cable box is turned down completely, you will not be able to adjust your TVs volume with the Commander.

Operating a VCR

2 To change the input mode. 8 To expose the on-screen display. qf To switch the antenna output. qg CH+: Channel up CH: Channel down qh To select a deck. wa N: To play. x: To stop. m: To rewind. M: To fast-forward. zREC: To record, press N while pressing zREC. X: To pause.
The Commander can be set up to operate only one component per button unless their code numbers happen to be the same. For example, you cannot set up the Commander to operate a Sony TV and a Panasonic TV simultaneously (because they use different code numbers). You may not be able to operate even a Sony brand component with the factory presetting. In such a case, follow the procedure in Setting the Code.
There may be cases you may turn on/off the cable box by pressing CH+ or CH on the Commander. If your cable box can control volume, be sure to set its volume control to a medium position. If the volume on the cable box is turned down completely, you will not be able to adjust your TVs volume with the Commander.
DVD Home Theater (DVD/Receiver combo)/ Sistema de cine domstico en DVD (combo de receptor de DVD)
Sony Bose Insignia JVC LG Nexxtech Onkyo Panasonic Sharp Yamaha Zenith
For the customers in the U.S.A.
Customer Support Information
If after youve read through this manual you still cannot get the Remote Commander to work properly, call the Sony Customer Support Helpline at 1-800-822-2217.

doc1

3-276-523-12(1)

Startup Guide

Remote Commander

This guide shows you how to set the Remote Commander to operate your components. Enter the code number
Searching for the Correct Code
You can find a code number available for a component that does not have one in Component code numbers. Before starting the Search function Set each component to the following status so that the Search function works effectively. TV, DVD Home Theater: Power-on Other components: Power-off
* If any of these components are assigned to any of the Component Select buttons, you can set a component code using the Search function.

SET TV VCR CBL POWER

Remote Button Descriptions

Operating a VCR

2 To change the input mode. 8 To expose the on-screen display. qf To switch the antenna output. qg CH+: Channel up CH: Channel down qh To select a deck. wa N: x: m: M: zREC: X: To play. To stop. To rewind. To fast-forward. To record, press N while pressing zREC. To pause.
Operating a digital satellite receiver
2 To switch the output of the digital satellite receiver to the TV. (When you connect a TV cable or antenna to the receiver, the output switches between TV and SAT programs.) 3, 4 and qd To change the channel. For example, to change to channel 5, press 0 and 5 (or press 5 and ENTER). 8 To turn on the display. 9 To bring up Master Guide. q; To exit the mode. qf To call up the DISH menu. qg Channel up: + Channel down: qh To tune to the last tuned station. qj To call up the PVR menu. qk To call up the MENU display. ql To move the cursor up, down, to the left or right, or to enter a selection. w; To bring up the Station Index. wa N: m: M: zREC: To play. To rewind. To fast-forward. To record, press N while pressing zREC. x: To stop. X: To pause.: To proceed to the previous location. >: To proceed to the next location. : Replay (Flash ) : Advance (Flash +) A: RED button B: GREEN button C: YELLOW button D: BLUE button PAGE+: Page up. PAGE: Page down. To call up the title of the recorded program. To use the FAVORITE function.

RM-V210

2007 Sony Corporation Printed in China English
Operating Instructions Manual de instrucciones (parte posterior)
Component code numbers / Nmeros de cdigo de componentes

English

DVR (digital video recorder), SAT (digital satellite receiver), Cable box, TV, DVD Home Theater, DVD and VCR
The following tables show brand names and their corresponding code numbers.
DVR (Digital Video Recorder) / DVR (Videograbadora digital)

Brand / Marca

Sony Humax Panasonic Philips Pioneer ReplayTV Tivo Toshiba

SET indicator

Tivo ReplayTV Code No. / N. cdigo Code No. / N. cdigo
3201, 3205, 3206 3202, 0413 3202, 3201, 3203 3203, 3204

INPUT PIP

Example: To set up a Philips DVR
When to replace the batteries

Espaol

DVR (Videograbadora digital), SAT (Sintonizador de recepcin va satlite digital), adaptador para cablevisin, televisor, sistema de cine domstico en DVD, DVD (reproductor de discos DVD) y videograbadora
Las tablas que se presentan a continuacin muestran las marcas y los nmeros de cdigo correspondientes.
Find the code number in Component code numbers.
Operating a DVR (Digital video recorder)
2 To change the input mode. 3 and qd To change the channel. For example, to change to channel 5, press 0 and 5 (or, press 5 and ENTER). 8 To turn on the display. 9 To bring up Master Guide. q; To clear the setting. To exit the setting menu. qg CH+: Channel up. (*PAGE+) Page up. CH: Channel down. (*PAGE) Page down. qh To operate the JUMP or CHANNEL RETURN qj To call up the Tivo menu. qk To call up the MENU display. ql To move the cursor up, down, to the left or right, or to enter a selection. wa N: To play. m: To rewind. M: To fast-forward. zREC: To record, press N while pressing zREC. x: To stop. X: To pause.: To proceed to the previous location. >: To proceed to the next location. : Replay (Flash ) : Advance (Flash +) ws D: (*Live TV) To bring up Master Guide. A: (*REPLAY) To replay. Or to go into REC/REVIEW mode during play. (After rewinding approx. 5 seconds, replay begins.) wd PAGE+ : (*THUMBS+) To select the desired recorded program. (It is necessary to have recorded the desired program.) PAGE : (*THUMBS) To select the desired recorded program. (It is necessary to have recorded the desired program.) wf (*LIST) To call up the title of the recorded program.

MUTING

RECALL
For the customers in the U.S.A. WARNING
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. You are cautioned that any changes or modifications not expressly approved in this manual could void your authority to operate this equipment.
Before replacing the batteries, have new ones ready beforehand. Under normal conditions, batteries will last up to one year. If the Commander does not operate properly, the batteries might be worn out. Replace the batteries with new ones.
1 Press and hold SET for more than two seconds. The SET indicator lights up. 2 Press the Component Select button for the desired component. 3 Press CH + (or CH ) and POWER in turn until the component reacts as follows: TV, DVD Home Theater: Power-off Other components: Power-on Press CH + to go to the next code number. Press CH to go back to the previous code number.

MUTING A B

wd wf wg
Press and hold the SET button for 2 seconds or more to set a Component Code. Mantenga presionado el botn SET durante 2 segundos o ms para ajustar un cdigo de componente.

Cable box / Adaptadores para cablevisin
Sony ABC Adelphia Advanced Newhouse Altrio Americast Atlantic Broadband Bell South Blue Ridge Brigth House Cablevision Charter Comcast Cox General Instrument Gnc Hamlin Illico Jerrold Memorex Motorola NET Oak Pace Panasonic Paragon Philips Pioneer Pulsar Regal Rodgers Runco Scientific Atlanta Seren Sigecom Susquehanna Time Warner Tocom Toshiba Videotron Wideopenwest Zenith

Code No. / N. cdigo

3107, 3103, 9002, 9003, 9004, 9005, 9006, 9007, 9008, 9018, 9022, 9043, 9022, 9023, 9024, 9025, 3103, 9002, 9003, 9004, 9005, 9006, 9007, 9008, 9018, 9022, 9043, 3103, 3110, 9027, 9028, 9019, 9020, 3104 3107, 9014, 9022, 9023, 9024, 9025, 3106 3102, 3107, 3108, 3109, 9009, 9010, 9045, 3107 9016, 9017, 3107 3105, 3107 3105, 3106, 9013

RECALL C

Code No.
Replace both batteries with new ones. Do not take more than 3 minutes to replace the batteries; otherwise, your code number setting will be erased.

EXIT TOOLS

Notes on Batteries
Do not mix old batteries with new ones, or mix different types of batteries together. If the electrolyte inside the battery should leak, wipe the contaminated area of the battery compartment with a cloth and replace the old batteries with new ones. To prevent the electrolyte from leaking, remove the batteries when you plan not to use the Commander for a long period of time.
SAT (Digital satellite receiver) / SAT (Sintonizador de recepcin va satlite digital)
DirecTV Dish Network Digital TV Tuner
Brand / Marca Sony DirecTV Dish Network General Electric Hitachi Hughes Humax JVC Magnavox Panasonic Philips Proscan RCA Samsung Sylvania Toshiba Usdigital Code No. / N. cdigo 3001, 3011, 3012 3013, 3017, 3018, 3019, 3023, 3018 3002, 3007, 3019 3002, 3007, 3019, 3021 3017, Code No. / N. cdigo Code No. / N. cdigo 3010, 3014, 3025 3010, 3014 3402 3401
If your component is not listed, try the search method described in Searching for the Correct Code.

SET TV VCR CBL POWER DVD

Set the Remote Commander for code input mode.
Press and hold SET for more than two seconds. lights up.

The SET indicator

The SET indicator flashes once after the numbers have cycled once. One cycle means, for example, that the commander has finished searching for all the component for code numbers allocated to the component. 4 Press ENTER. The SET indicator turns off. If the SET indicator flashes five times before turning off, setup is incomplete. Start over from Step 3. If the component does not operate properly, repeat steps 1 to 4 and search for another code. If you still cannot get the Commander to work properly, see Troubleshooting.

Operating a DVD

2 To change the input mode. 3 and qd Number buttons : To set items selected from the screen. 4 To select numbers 10 and above. 8 To show the current play status on the screen. 9 To bring up Master Guide. q; To return to the previous screen. qd To enter the setting. To set items selected from the screen. qf To switch the subtitle. qg CH+: Channel up. CH: Channel down. qh To select a deck. qj To switch the subtitle. qk To display the DVD menu. ql To move the cursor up, down, to the left or right, or to enter a selection. w; To call up the TOOLS menu. wa N: To play. m: To rewind. M: To fast-forward. zREC: To record, press N while pressing zREC. x: To stop. X: To pause.: To proceed to the previous location. >: To proceed to the next location. : Replay (Flash ) : Advance (Flash +) ws B: open/close D: To display the Top Menu. A: To call up the setup menu. wd PAGE+: To select DVD deck. PAGE: To select HDD deck. wf To display the title menu.
Setting Up the Remote Commander
About Setting up the Commander
The Commander is set up at the factory to operate Sony brand components. However, even if you are using the Commander with a Sony component, you may still need to set up the Commander for it, depending on the component. To set up the Commander to use with other (non-Sony) manufacturers components, or to use with a component that is not preset at the factory, you will need to follow the instructions in this manual to preset the Commander with the correct code number for your component. (See Component Code Numbers.)

Preset components TV VCR/Cable box/Digital satellite receiver/DVD/TV/Digital video recorder/DVD Home Theater Button TV VCR CBL DVD Factory setting Sony TV Sony VHS VCR Sony Cable box Sony DVD player

Specifications

Operable distance Power requirements Battery life Dimensions Mass Approx. 7 m (23 ft) (varies depending on component manufacturer) Two size AA (R6) batteries (not supplied) Approx. 1 year (varies depending on frequency of button use - up to approx. 300 times per day.) Approx. 29 mm (w/h/d) (2 1/3/3/16 in) Approx. 108 g (3.8 oz) (not including batteries)
Press the desired Component Select button.

TV VCR CBL DVD

General
1 To set up the Commander, press and hold SET for more than two seconds. 6 Volume up: + Volume down: 7 To mute the volume on a TV or DVD Home Theater. qa To turn the power of a selected component on or off. qs Component Select Buttons. Press to select a component to operate. About tactile dots
The number 5 button, the N button and CH+ each have a tactile dot for convenient use.

Enter the code number.

RECALL C D

PAGE GUIDE

Operating a Component
1 Press the button of the desired component on the Commander.
* This key corresponds to Tivo service or the replay service. Refer to its
instruction manual for details.
Design and specifications are subject to change without notice.

LIST FAV

Finish setting.

Press ENTER.

The validity of the CE marking is restricted to only those countries where it is legally enforced, mainly in the countries EEA (European Economic Area).
The SET indicator turns off. 2 Aim the Commander directly at the component.
Note on the VOL+/ and MUTING buttons
Sony Advent Aiwa Apex Broksonic Cyber Home Daewoo Denon Emerson Funai GO VIDEO Gpx Humax ILO Insignia JVC Kenwood LG Magnavox Marantz Panasonic Philips Pioneer Samsung Sansui Sharp Sylvania Symphonic Terapin Toshiba Yamaha Zenith

Let's check

Troubleshooting
If you have problems setting up or using the Commander: When setting up the Commander, carefully go through the procedures described in Startup Guide. If the code that is listed first for your component does not work, try all the codes for your component in the order in which they are listed. If all the codes fail to work (or if your component is not listed in this manual), try using the procedures in Searching for the Correct Code. Make sure that you are aiming the Commander directly at the component, and that there are no obstructions between the Commander and the component. Make sure the batteries you are using are not worn out, and that they are inserted correctly. Check that the button of the TV, VCR, CBL, or DVD is pressed to choose your desired component. Check that the component has infrared remote capability. For example, if your component did not come with a remote control, it probably is not capable of being controlled by the Remote Commander. Should any problem persist, reset the Commander to the factory setting by pressing the POWER, INPUT and VOL buttons simultaneously.

The Commander can be set up to operate only one component per button unless their code numbers happen to be the same. For example, you cannot set up the Commander to operate a Sony TV and a Panasonic TV simultaneously (because they use different code numbers).
Turn on the component you want to set up. Aim the Remote Commander at the component and press POWER on the Remote Commander. Was the component turned off?
3 Press the button for the function you want to use. See Remote Button Descriptions for complete descriptions of the buttons on the Commander.
The Commander controls or mutes the TVs volume when you select a visual component. The Commander outputs the signals to control or to mute a TV or DVD Home Theaters own volume when you have set one of these components.

Operating a cable box

2 To change the input mode. 3, 4 and qd To change the channel for example, to change to channel 5, press 0 and 5, (or press 5 and ENTER). 8 To turn on the display. 9 To switch the EPG display to on/off. q; To exit the setting menu. qg CH+: Channel up. CH: Channel down. qh To toggle the current/previous channel. qk To call up the MENU display. ql To move the cursor up, down, to the left or right, or to enter a selection. wa N: m: M: zREC: To play. To rewind. To fast-forward. To record, press N while pressing zREC. x: To stop. X: To pause.: To proceed to the previous location. >: To proceed to the next location. A: To operate the A button. B: To operate the B button. C: To operate the C button. PAGE+: Page up. PAGE: Page down. To call up the title of the recorded program. To use the FAVORITE function.
0201, 0202, 0203, 0024, 0030, 0214 0034, 0035, 0002, 0017, 0205 0040, 0042, 0212, 0233 0046, 0227, 0230 0042, 0215 0007, 0208 0050, 0205, 0213, 0002 0012, 0221, 0231 0004, 0019, 0021, 0204 0014, 0212, 0219 0215, 0220 0040, 0218
Notes on Using the Remote Commander
Basically, use this Commander in the same way as the remote controls supplied with your components. Using this Commander will not increase the functions of your components. The functions of the Commander are limited to the functions of the components themselves. For example, if your TV does not have a MUTING function, MUTING on this Commander will not function with your TV. Some functions of a component may not work with this Commander. If your cable box can control volume, be sure to set its volume to a moderate level. If the volume on the cable box is turned down completely, you will not be able to adjust your TVs volume with the Commander.

Operating a TV

2 To change the input mode. 3, 4 and qd To change the channel. For example, to change to channel 5, press 0 and 5 (or press 5 and ENTER). 8 To display the current channel on a TV. 9 To bring up Master Guide. q; To exit the menu. qf To operate the Picture-inPicture function. qg CH+: Channel up. CH: Channel down. qh To operate the JUMP, FLASHBACK or CHANNEL RETURN function on the TV. qj To operate the SLEEP function on the TV. qk To call up the MENU display. ql To move the cursor up, down, to the left or right, or to enter a selection. w; To call up the option menu. wa To select the TV input source. ws A: VIDEO 1 B: VIDEO 2 C: VIDEO 3 D: VIDEO 4.: VIDEO 5 : VIDEO 6 : VIDEO 7 >: VIDEO 8 m: HDMI select N: HDMI 1 M: HDMI 2 zREC: Component video connection select x: Component video connection 1 X: Component video connection 2 wg To use the FAVORITE function.
Operating a DVD Home Theater
2 To change the input mode. 3 and qd Number buttons: To set items selected on the screen. 4 To select numbers 10 and above. 6 VOL+: AMP volume up VOL: AMP volume down 7 AMP volume muting 8 To show the current play status on the screen. 9 To change the sound. q; To return to the previous screen. qf To switch the subtitle. qg CH+: Tuner + CH: Tuner qk To call up the MENU. ql To move the cursor up, down, to the left or right, or to enter a selection. w; AMP menu To play. To rewind. To fast-forward. To record, press N while pressing zREC. x: To stop. X: To pause.: To proceed to the previous location. >: To proceed to the next location. : Replay (Flash ) : Advance (Flash +) ws B: open/close A: To call up the setup menu. C: Disc skip D: To display the Top Menu. wg To call up MEMORY. wa N: m: M: zREC:
DVD Home Theater (DVD/Receiver combo) / Sistema de cine domstico en DVD (combo de receptor de DVD)
Sony Bose Insignia JVC LG Nexxtech Onkyo Panasonic Sharp Yamaha Zenith

Installing the Batteries

Slide open the battery compartment and insert two size AA (R6) batteries (not supplied). Be sure to line up the + and on the batteries with the + and in the battery compartment.
Yes Check that the other buttons function. No Start over from Step 2 above, using the other code number.
If you still cannot get the Remote Commander to work properly after trying all the codes listed for your component, try the search method described in Searching for the Correct Code.
4501, 4502, 4503, 4504, 4514, 4513
In some cases, you can turn the cable box on/off by pressing CH+ or CH on the Commander. If your cable box can control volume, be sure to set its volume control to a moderate level. If the volume on the cable box is turned down completely, you will not be able to adjust your TVs volume with the Commander.

For the customers in the U.S.A.
Customer Support Information
After you have read through this manual, if you still cannot get the Remote Commander to work properly, call the Sony Customer Support Helpline at 1-800-822-2217.
If the SET indicator flashes five times before lighting up, it means that the setup is incomplete. Confirm the code number and start over from Step 4. If you do not input anything into the Remote Commander within 20 seconds between each step, or if you press SET while setting the code number the setup procedure will be canceled. Start over from Step 2.
Continued on reverse side / Contina en el reverso

TV / Televisores

Sony Admiral Advent Aiwa A Mark Anam Aoc Apex Archer Audiovox Bell & Howell Broksonic Craig Crown Ctx Curtis Mathis Daewoo Durabrand Emerson Emprex ESA General Electric GoldStar Haier Hitachi Hp ILO Insignia JC Penny JVC Konka KTV LG LXI(Sears) Magnavox Maxent Megatron Memorex MGA Minutz Mitsubishi Motorola Norcent Olevia Optonica Panasonic Philco Philips Pioneer Polaroid Princeton Proscan Proton Protron Quasar Radio Shack RCA Realistic Sampo Samsung Sanyo Scott Sharp Signature 2000 Spectricon Sva Sylvania Symphonic Syntax Brillian Tandy Tatung Techwood Toshiba Universal Videch View sonic Vizio Wards Zenith Zonda

VCR / Videograbadoras

Sony (VTR1:Betamax) Sony (VTR2:8mm) Sony(VTR3:VHS) Sony(VTR4:DV) Sony(VTR5:DV) Sony(VTR6:DV) Admiral Aiwa Audio Dynamic Broksonic Canon Citizen Craig Curtis Mathis Daewoo DBX Dimensia Emerson General Electric GO VIDEO GoldStar Hitachi HQ Insignia Instant Replay JC Penny JVC Kenwood LG LXI(Sears) Magnavox Marantz Marta MGA Minolta Mitsubishi Multitech NEC Olympic Optimus Panasonic Pentax Philco Philips Pioneer Proscan Quasar RCA Realistic Samsung Sansui Sanyo Scott LXI(Sears) Sensory Science Sharp Signature 2000 Sylvania Symphonic Tashiro Tatung Teac Technics Toshiba Wards Yamaha

Especificaciones

Alcance de control Alimentacin Duracin de las pilas Dimensiones Peso Aprox. 7 m (puede variar dependiendo del componente de cada fabricante) Dos pilas de tamao AA (R6) (no suministradas) Aprox. 1 ao (puede variar dependiendo de la frecuencia de utilizacin, hasta unas 300 veces al da). Aprox. 29 mm (an/al/prf) Aprox. 108 g (excluyendo las pilas)
8201 8014, 8104, 8121 8123, 8104 8117, 8104, 8104 8020, 8035, 8119 8080, 8081, 8092 8015, 8020, 8023, 8039, 8042, 8074, 8083, 8118, 8083, 8097 8107, 8108, 8018, 8045, 8049 8030, 8049, 8104, 8006, 8028 8117, 8081 8031, 8108, 8112, 8113 8219, 8128 8213, 8216, 8083, 8103 8213, 8083, 8092, 8101, 8102 8104, 8107, 8108, 8030 8208, 8028 8116, 8030, 8049, 8207, 8220, 8018, 8043, 8088, 8103, 8111, 8121, 8211, 8117 8129, 8221, 8203, 8016, 8108, 8049, 8067, 8079 8031, 8035 8207, 8043, 8056, 8108, 8121 8210, 8018, 8037 8214, 8006, 8045, 8053, 8015, 8023, 8122 8006, 8045, 8053, 8218 8206, 8026, 8055 8023, 8054, 8069, 8120, 8204, 8014, 8015, 8104, 8111, 8083 8023, 8039, 8074 8129, 8221, 8205, 8014, 8052, 8060 8107, 8217, 8093, 8094, 8132 8212, 8215 8015, 8107, 8108 8010, 8121 8104

 

Tags

Ecfweb6 Cuna Nemo CCD-MC100 DPF-D830 059 MD Kodak Z710 NV-MX5000 40085 MHC-GNV111D Laserjet 3600 DTR2610 UE-32C6700 LS300 TS-480SAT Phone TLU-01553 KV-21V4B 10FF2M4 How To Program 60840 L L76819 DV6T811N RM-V210 SE211 10T500 LN32C530f1M Watch C46 Super DSC-W170 B NW-S745 HL-1660E MIM 2190 CLP-230 Vectis 25 Extender VGN-NS21e S Manual TC-1465 Area 51 952801822 Range RX-5000 KAC-526X AVR-1907 KDL-40EX40B KDC-W410A HT-DM160 PSR-170 GR-B207dxza TH-37PA50E KX-TG1313EG DVD5183 MZ-R35 Headset H350 SCH-R860 LA 620 1380MF CCD-TRV15E DP-8025 DVP435E PN 8388 Prodigy W850E Control S2020 AT2702S NWZ-X1051 Dimage X50 MB290 AWF1373 EW1230W Economy Env06 917-272921 RM250 Remote Instructions GI-10 Macbook AIR RSS-900 410GSM Gr-d33 UP-X300 NBG-417N 2152 C K8N-VMI Datasheet 700 PE Comfort KDC-MP202 Switch DVP-PR30 DMP-BD60 32PW9527-12 KX-7030 WD-1049C Dxai8580 UW500 DST Kt-6 Sedan 770 SW Cleaner RM4400L T2-PH1

 

manuel d'instructions, Guide de l'utilisateur | Manual de instrucciones, Instrucciones de uso | Bedienungsanleitung, Bedienungsanleitung | Manual de Instruções, guia do usuário | инструкция | návod na použitie, Užívateľská príručka, návod k použití | bruksanvisningen | instrukcja, podręcznik użytkownika | kullanım kılavuzu, Kullanım | kézikönyv, használati útmutató | manuale di istruzioni, istruzioni d'uso | handleiding, gebruikershandleiding

 

Sitemap

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101