The new Peugeot Partner

U OD CT
Professional efficiency down to the smallest detail
Peugeot has had a strong presence in the commercial vehicle market for more than a century as well as the private car market. The launch of the new Partner now completes the expansion and complete renewal of the range, which began back in June 2006.
The range now has the youngest average product age and is the most comprehensive on the market, featuring a choice of load volumes ranging from 2.5 cubic metres to 17 cubic metres.From the Bipper, the small and cleverly designed city runaround, to the large Boxer van, with the Partner and the compact Expert in between, the Peugeot range today offers an effective solution to satisfying the needs of any professional user. This aim to efficiently meet the requirements of many different professional users can clearly be seen in the design of the new Partner. In its light van version the Partner was launched in 1996. Since its launch more than 761,000 vehicles have been produced, making a total of 1,332,000 including the MPV. Total sales (light van plus MPV) have risen steadily since its launch, from 60,000 units in 1997 to more than 150,000 units in 2007. Its inbuilt qualities and its many new developments (sliding side doors, restyling and new HDi engines The new Partner, like its predecessor, is manufactured in Vigo (Spain). Distinctive and meeting all the criteria of quality, durability, efficiency and professionalism that is In this market, the small van segment leads the way with a market share of 22.6 % representing 412,000 vehicles registered in 2006. This segment has also grown significantly over the last decade, rising from 351,000 units in 1997 to 412,000 in 2006, an increase of 17.5 %. in particular) have all contributed to this small vans undeniable success. The total market for light commercial vehicles in Europe (18 countries) at the end of 2006 achieved a record level of 1,826,000 registrations and showed a 6% increase compared to 2005. It is a very dynamic market, particularly in France, the United Kingdom and Italy. It is constantly changing due to the renewal of products and the changing demands of the professional users.
demanded from its customer base, the new
The new Partner will be marketed initially in the main European countries. An extended and a platform cab version will appear in the autumn of 2008.
Partner from Peugeot is a real work horse which is not only versatile, but also rewarding to own.
Two body shapes offering unrivalled load capacities
The new Partner, available in two lengths (4.38 metres or 4.63 metres), comes with a benchmark segment. Its smooth lines create an impression of energy and durability. The design of the rear is particularly well suited to its use as a utility vehicle and also helps optimise load capacity. In the short version specification in the small van for example, the new Partner offers a load volume of 3.3 cubic metres, combined with a payload of up to 850 kg. For the extended version, this volume increases to 3.7 cubic metres, with an effective length of up to 3.25 metres. The width at the wheel arches of 1.23 metres enables both versions to accommodate a euro pallet (1.20 metres x 0.80 metres)!
A carefully designed and innovative layout: the Multi-Flex bench seat
Designed down to the smallest detail by professionals for professionals, the new Partner offers a wealth of clever features and practical solutions to make life easier for its users. The innovative Multi-Flex bench seat ensures unrivalled modularity and offers many functions that will appeal to many different professional users. For example it enables the vehicle to accommodate a third occupant, a feature not previously offered in the small van market segment. Partly retractable, the Multi-Flex bench seat allows a load length of 3 metres, running from the rear doors to the fascia panel. It offers an additional 400 litres of load capacity, taking the maximum load capacity to 3.7m3 or 4.1m3 depending on the body style. Inside the vehicle, the occupants will benefit from the comfortable, strong and safe passenger compartment. They will also be able to benefit from numerous handy storage compartments. The new Partner, which can be fitted with either panelled or glazed hinged rear doors, can also be equipped with two sliding side doors or a rear tailgate with an opening rear tailgate glass, making the load space accessible from all sides whatever the situation. Other longer objects can also be carried inside by means of the ingenious design of the interior roof rack which runs the entire length of the roof.

Safe and competent road holding under all circumstances
The new Partners safe and protective structure with three impact absorption structures is combined with a suspension that ensures faultless and dynamic handling whatever the load. The new Partner has a wide range of modern engines ideal for the most varied uses. To reduce further the vehicles environmental impact, an engine with an Safety equipment, such as 6 air bags and ESP, will help to ensure the safety of all the occupants. additive enhanced diesel particle filter system (DPFS) is also available: the 1.6 litre HDi DPFS 66 kW ~90 bhp.
At the cutting edge of communication with an innovative fleet management system
A modern and adaptable vehicle, the new Partner also provides access to innovative services such as the fleet management telematics module. An integrated GPRS unit in the cars electronic architecture transmits data to a PSA Peugeot Citron service desk. Information such as distance travelled, oil level and mileage to next service is automatically and periodically sent to fleet managers, enabling them to optimise their fleet Professional users will appreciate the design quality of the new Partner. Its high-quality specification will set a new standard in its segment. Its modularity and the clever integration of a wealth of practical features make it a real pleasure to use on a daily basis. running costs. The new Partner is the first vehicle to benefit from this optional innovative service.

January 2008

An innovative style combining durability with a modern design
The first impression created by the smooth lines of the new Partner is that of a dynamic and robust vehicle. The attention to detail, particularly the rear load area, suggests practicality and an excellent load capacity. The key to its personality is the main styling line which begins at the front of the roof. It follows the very forward-positioned front windscreen, drawing the eye to the front of the vehicle and then ends in the wings. This unbroken line gives a modern feel and dynamism to the body shape as a whole. The sides are defined by a recess in the lower The Peugeot designers have also created an expressive front emphasising the sturdiness of the new Partner. The design of the wraparound lower front panel reinforces this idea and is enhanced by a generous air intake grille, a characteristic of the Peugeot brand. The slightly curved design of the rear of the vehicle The position of the fog lamps, low down on the sides of the front panel, confirms the dynamic feel of the vehicle and also creates an impression that the vehicle is larger than it is. Its relationship with the rest of the range is confirmed by the prominent position of the Peugeot badge located on the lower front panel. The large headlamp units have a very feline style and the cylindrical design of the different light units is similar to the designs from other Peugeot is available in two versions (hinged doors or tailgate) and gives the impression of a practical and generous load area. The rear lights are positioned high up where they are protected from small day to day knocks. These lights are specific according to the type of rear opening. Finally, the hinges on the hinged door versions are concealed, reflecting Peugeots determination to enhance the quality of the new Partner down to the smallest detail. angle of the windows. This gives an individual look to this part of the vehicle whilst complementing the front. The flush fitting windows accentuate the modern flowing design of the new Partner. The overall impress is of a robust vehicle which is accentuated further by the wide body side protection mouldings. On the sides, the large wheel arches with their pronounced curve re-affirm the vehicles strong image. models. The styling continues with the front grille which visually enhances the dimensions of the headlamp units.

A load volume in a class of its own
The new Partner is available in two body shapes with a length of 4.38 metres and 4.63 metres, on a single wheelbase of 2.73 metres. The height varies between 1.81 metres and 1.83 metres according to version. These dimensions offer benchmark loading access able to meet the varied requirements of many types of customers. The load capacity of the new Partner positions it straight away as a market leader. In particular: The effective volume is 3.3 cubic metres. The payload is 625 or 850 kg. The accessible length is 1.80 metres and can be increased to 3.0 metres with part of the MultiFlex bench seat retracted. While offering a high load capacity, the new Partner still is relatively compact in terms of size, making it versatile and easy to drive in the city centre or in industrial areas. The new Partner in its extended version offers an even higher specification: The accessible volume is 3.7 cubic metres. The payload is 770 kg. The accessible length is 2.05 metres and can be increased to 3.25 metres with the Multi-Flex bench seat folded. The maximum accessible width is 1.62 metres. The accessible width at the wheel arches is 1.23 metres, making it possible to load a Euro pallet. The effective height is 1.25 metres. The load sill is 0.584 metres.
A professionally designed load space
The load space has been designed with particular care to ensure ease of use and robustness. For example, the interior is protected against possible payload damage. The inside walls are fully lined under the bodyline and a synthetic protective covering protects the load floor. By protecting the load space against internal damage, it ensures the appearance of the exterior bodywork remains intact, which is important for the owners image. The floor has six robust and practical locating rings to hold the payload in place. In addition, different load restraints are available, starting with a five bar drivers ladder frame protector located behind the drivers seat. At the customers request, it is possible to equip the new Partner with several types of bulkhead, Practicality is combined with safety, thanks to selective door locking. A button on the fascia panel, with an LED indicator, allows the load space to be locked or unlocked independently of the cab. This button can also be used in addition to the central locking button. The mid height bulkheads come as standard with a removable section in the lower part allowing the maximum possible load length to be used in conjunction with the Multi-Flex bench seat. each meeting specific requirements: mid height bulkhead, mid height bulkhead with grille top section, mid height bulkhead with grille top section and sound insulation.

For professional users who want to increase the vehicles anti-theft protection, deadlocking is available, which makes all the interior door opening controls inoperative if the vehicle is broken into.
The new Partner has obtained excellent scores in the Thatcham security assessment: 5 stars for the anti-theft classification with alarm (4 stars without alarm).
Original modularity with the innovative Multi-Flex bench seat
A real innovation in the segment, the Multi-Flex bench seat offers an innovative level of modularity. Its multiple configurations maximise the load space and also make the interior of the new Partner even more practical. Its functions are as follows:
Jump seat for more load height at the front
Similar to a jump seat, the seat cushion of the side section can be raised to free up space in the front part of the cab. This makes it possible to transport a tall load using the space where the passenger would normally sit.
Retractable, therefore obtaining a continuous flat floor within the load space
Thanks to the intelligent and cleverly designed mechanisms, the side section, once folded, increases the capacity of the load space. This makes it possible to transport loads of up to 3 metres in length on a flat floor, or even 3.25 metres in the extended version of the Partner! It offers an additional 400 litres of load capacity, taking the maximum load capacity to 3.7m or

Mobile office

The rear of the centre seat can be folded flat to create a writing table which can also be used to hold documents. The seat can also be raised to provide access to a storage space which can be secured by a padlock.

Extra third seat

The Multi-Flex bench seat allows a third person to legally sit in the central position. This seat is equipped with a three point seat belt and benefits from the protection of the dual passenger air bag. All functions of the Multi-Flex bench seat enhance the superb modularity of the new Partner. This innovative equipment will appeal to a large number of professional users in search of greater flexibility.
4.1m3 depending on the body style. A first in this market segment, this innovation is made possible by the use of all the available space between the rear doors and the fascia panel bulkhead. The backrest of the side seat also has a rear protective panel able to withstand even the most rigorous use.
Two sliding side doors for excellent accessibility
The new Partner from Peugeot benefits from the meticulous attention paid to the design of even the smallest detail, in order to make day to day use easier. It is therefore extremely versatile and can be accessed easily in all possible A glazed rear tailgate which can be equipped with an opening rear tailgate glass is also available, as well as a roof flap, which makes it possible to carry long objects while driving with the doors closed. To supplement the 15 W rear load area interior The new Partner can be equipped with one or two sliding side doors. With an accessible width of 640 mm and an accessible height of 1100 mm, these doors create a wide opening directly into the load space. At the customers request, they can be panelled or glazed, with the possibility in this case of tilt opening windows. At the rear, the asymmetric hinged rear doors can accommodate a load with a maximum width of 1250 mm and a height of 1200 mm. The square shaped loading space helps to facilitate loading Lastly, the design of the profile of the rear doors allows the new Partner to benefit from a load sill height of only 584 mm. Practical in every way and under all circumstances, professional users will appreciate the Partners easy access. light, a handy mobile lamp with an output of 5 W is located in the load space and is available according to the particular model. circumstances! The shape of the doors has been designed in order to make access simple and offers a high level of ergonomics to its professional users, who need to load and unload their vehicle regularly. and unloading. Panelled or glazed, the hinged doors can be opened out to an angle of either 90 or 180, making loading operations much easier.

A functional and comfortable cab
The interior suggests a high of level efficiency, comfort and durability ideal for a commercial vehicle. The fascia panel with its wide raised profile is very user-friendly and protective. The expansive and well-structured centre console confirms the character of the interior styling. Two air vents and two round openings shape the console and enhance the air of quality within the cab. Two side air vents are located at the ends of the fascia panel complimenting the central section. Thanks to the wide opening of the doors and ergonomic passenger compartment controls, its easy for the driver to find a comfortable driving position. He is helped by a height and depth adjustable steering wheel and a height adjustable drivers seat depending on the chosen model. The specially designed seats, improve the comfort of The generously dimensioned instrument panel and its easy to read dials add to the feeling of wellbeing in the new Partner.
occupants by offering excellent lateral support. The driver will therefore quickly feel at home in the vehicle. The gear lever is also in easy reach on the fascia panel. The various console control buttons are easy to use and distributed ergonomically.
Once inside, occupants will appreciate the excellent exterior visibility thanks to the large glazed surface area. The wide and inclined front windscreen hugely contributes to this visibility, as do the extensions to the front windows. The side doors and rear doors can also be glazed if required.
Practical and cleverly arranged storage areas
During the design of the vehicle, every available space was put to use. As a result, the new Partner has lots of storage compartments. The front doors have two storage pockets, one In the passenger compartment, several storage areas have been incorporated in the fascia panel: A glove box in the upper section behind the steering wheel. An open or closed glove box which can be cooled, according to the particular model, on the passenger side. Side storage in the lower centre console on the passenger side. An ISO storage unit with a non-slip mat according to whether or not the CD autochanger is fitted. Two storage pockets under the air vents in the central part of the fascia panel. A removable ash tray. Overhead storage above the drivers head can accommodate a variety of objects in a volume of up to 12.5 litres, and also locates the sun visors and the courtesy light. Openings placed at the rear of the overhead storage make it possible to see stored objects and retrieve them more easily. All available space has been used providing a Lower down, near the hand brake, there is a wide storage space with two cup holders in the rear section. This area can be equipped optionally with large number of useful storage compartments that are practical for day to day use. In the load area, there is a storage pocket in the rear doors. Two storage spaces each with a volume of 3.5 litres are located in the floor under the front seats. These can be accessed from the rear. A drawer under the drivers seat with a volume of 5 litres is also available as an option. with a total volume of 7.5 litres, able to hold a 1.5 litre bottle and a can. a closed, removable console offering an additional volume of 13 litres.

An innovative interior roof rack
An innovative interior roof rack, modular and practical, can be installed inside the load area to carry long objects such as planks of wood or PVC tubes. Making the most of the good interior height of the new Partner as well as the overhead storage, it is possible to accommodate objects measuring nearly 3 metres in length in the load area.
A latest-generation vehicle with optimised safety
The new Partner is manufactured on platform 2 of the PSA Peugeot Citron group. This platform ccontinuously improves with every new vehicle launch, and its use ensures a high level of safety and road holding of the highest order. In terms of passive safety the vehicle benefits from three impact absorption structures (low, middle and top) ensuring optimal distribution of impact forces. In the event of a frontal impact they combine to preserve the integrity of the passenger compartment. The lower structure backs up the traditional middle structure through the use of sub-frame extensions, a feature borrowed from the Peugeot 407. The addition of a third upper impact structure has been created by reinforcing the area above the At the rear, an Impact beam and specific parts of the under body have been designed to deform in a controlled manner in the event of a rear impact, thereby limiting repair costs. In the event of a side impact, occupants are protected by the reinforced B/C post, the diagonal reinforcements in the door and the door padding, but also by the design of the seat structure which is designed to absorb some of the impact forces. The lower impact structure also enhances the protection of pedestrians and also helps reduces repair costs. front wings. It absorbs and directs any impact forces not yet dissipated towards the front windscreen pillar and the door frame.
Safe and efficient road holding regardless of load
The architecture of the suspension and wheels is a development of the setup normally found on platform 2 vehicles, with all its proven dynamic qualities. The new Partner has a pseudo McPherson type front suspension consisting of drop links, helical springs, hydraulic dampers and an anti-roll bar. It incorporates all of Peugeots know-how in terms of road holding and benefits from adaptations designed specifically for professional use. Designed to carry a load of up to 850 kg, the new Partner has special dampers designed to meet At the rear, the suspension consists of a rear torsion beam complete with helical springs, hydraulic dampers and an anti-roll bar. Particular attention has also been paid to the location of the rear dampers which have been inclined, in order to preserve the maximum available interior load space. This positioning reduces the space needed for the wheel arches in the load area. This means Euro pallets can be loaded easily into the new Partner.

this weight requirement but also to withstand use on poor road surfaces, such as site work for example. Also the rear suspension mountings are constructed from two different types of material to enhance the rigidity of the rear suspension. For effortless manoeuvring regardless of load, two types of power steering, according to the different engine options are available. In both cases, the power steering is variable. For petrol engines and 1.6 litre HDi 75 and 90 bhp versions, it is controlled by an engine driven hydraulic pump which modulates assistance according to engine speed. For the 1.6 litre HDi DPFS 90 bhp engine, an electro-hydraulic pump unit takes other factors into account such as vehicle speed and speed of rotation of the steering wheel to vary the level of steering assistance electrically. In terms of braking, the new Partner is equipped with four disc brakes to ensure efficient
Regardless of engine, 195 / 65 R15 tyres are fitted to all models. If the Site Pack is specified, the tyres are slightly different -195/70 R15. To assist the driver when braking, the vehicle is equipped as standard with ABS, with electronic brake force distribution (EBFD) and emergency brake assist (EBA). The automatic activation of the hazard warning lights in the case of emergency braking is also contained within the ABS system. This reduces the risk of a collision and alerts following vehicles as soon as possible of a possible emergency situation. ESP (Electronic Stability Program) is available as an option on all engines. It is coupled with an ASR traction control system and a hill-start assist function. Thanks to all of this equipment and the quality of the suspension, the dynamic and safe road holding of the new Partner is set to become a benchmark in its market segment.
performance regardless of load. The diameter of the ventilated discs at the front is 283 mm while the rear non-ventilated discs have a diameter of 268 mm. This arrangement gives good feel and dependable braking performance.
A range of high-performance engines suitable for everyday use
A varied and modern range of four engines is available on the new Partner. It consists of a 1.6 litre 90 bhp petrol engine and three HDi diesel engines (1.6 litre HDi 75 and 90 bhp and 1.6 litre HDi DPFS 90 bhp), providing the ideal option all types of use. These engines are characterised by their high performance and low emissions. This results in particular in reduced fuel consumption, but also the availability of an additive enhanced diesel particulate filter system (DPFS) on the 1.6 litre HDi DPFS 90 bhp engine for improved environmental protection.

1.6 16v Engines 66 kW (~90 bhp)
Capacity (cm3) Number of cylinders Number of valves Fuel Maximum power Maximum torque *With Overboost Injection Induction Gearbox

na: not available

1.6 HDi 55 kW (~75 bhp)
16 Diesel 55 kW at 4000 rpm 185 Nm at 1750 rpm Direct - Common Rail 1600 bar Fixed geometry turbo Manual 5-speed

1.6 HDi 66 kW (~90 bhp)

16 Diesel 66 kW at 4000 rpm 215 Nm at 1750 rpm Direct - Common Rail 1600 bar Fixed geometry turbo Manual 5-speed
1.6 HDi DPFS 66 kW (~90 bhp)
16 Diesel 66 kW na na Direct - Common Rail 1600 bar Variable geometry turbo Manual 5-speed
16 Petrol 66 kW at 5500 rpm 132 Nm at 2500 rpm Indirect multipoint sequential Naturally aspirated Manual 5-speed
A high level of safety equipment
The new Partner is a safe vehicle thanks to its strong structure but also thanks to its comprehensive and modern equipment designed, to protect the occupants in the event of a collision. The three point inertia reel seat belts fitted to the outer front seats are height adjustable and are equipped with pretensioners and force limiters. An illuminated warning and an audible alarm indicate if the drivers seat belt has not been fastened. For fleet customers, an optional passenger fasten seat belt indicator with passenger detection, is available. The passenger seat is also equipped with a threepoint Isofix anchorage system, ensuring an Isofix child seat can be installed as safely as possible. This can be activated very simply by means of a The vehicle can be equipped with up to six air bags according to the particular model. At the front, the drivers air bag is supplemented by a passenger air bag (which can also be disconnected if required) and two side/ chest air bags, as well as two curtain air bags. remote control located on the steering column and allows the driver not to exceed the speed of his choice or to set the speed at which he wishes to drive. Firstly an optional tyre under-inflation detection system. This system, a first in the small van segment, detects tyre under inflation or a puncture by means of sensors located in each wheel. It measures pressure and temperature variations inside the tyres and can automatically locate the wheel the defective tyre is fitted to. The information is communicated to the driver by means of a visual message on the fascia panel and an audible alarm. In addition to safety, the regular checking and adjustment of tyre pressures, reduces road noise and optimises fuel consumption and tyre wear. It is also possible to choose an optional speed limiter/cruise control. At the level of primary safety, two devices can help the driver to reduce the risk of an accident.

Comfortable and pleasant to drive
A vehicle designed for professional use, the new Partner pays close attention to comfort and features designed to improve the wellbeing of occupants who may need to spend many hours in the vehicle. For enhanced comfort regardless of the outside temperature, manual air conditioning with recirculation of interior air is available as an option. But it is also possible, according to the particular model, to opt for automatic dual zone air conditioning. This equipment, normally found in passenger cars will delight passengers in search of personalised temperature comfort, where each occupant can set the temperature to their own required level.
For cold climates, an additional heating system using exhaust energy to accelerate temperature build-up in the passenger compartment is available as an option on HDi engines. The Exhaust Heat Recovery system makes screen de-misting more effective. This system, which is 100% environmentally friendly, is automatically managed by the engine ECU with no driver input and there are no emissions into the atmosphere. The system is controlled automatically by the engine ECU with no intervention by the driver. For cold climate destinations, a heater is also available to heat the front seats.
Occupants in the new Partner will be able chosen from a number of optional multimedia systems, starting with the MP3 compatible RD4 mono CD radio with an output of 4 x 35 W. This system can be supplemented by a 5 CD auto-changer or a hands-free Bluetooth kit. The Bluetooth system is controlled by controls mounted on the steering wheel and it uses a microphone integrated into the interior light console. Telephone conversations can therefore be heard through the vehicles audio system.
Equipment to make driving easier
To make daily driving easier, the new Partner offers a range of optional equipment. Particularly useful for urban driving, rear parking assistance warns the driver of an approaching obstacle by means of an audible alarm and, according to the particular model, by visual feedback on the multifunction display. This function can be de-activated by a button on the instrument panel. Automatic windscreen wipers are also available, as well as automatic illumination of the headlamps. The follow me home lighting system gives users Lastly, to protect the door mirrors from knocks when parking or to aid getting into the vehicle in certain situations, it is possible to electrically fold the door mirrors inwards. This optional feature can be controlled manually by means of the dedicated control on the front electric window control panel or automatically when locking or unlocking the vehicle by means of the remote plip control key. the benefit of exterior lighting when they get out of the vehicle. This function can be automatic or manual dependent on whether automatic illumination of the headlamps is fitted.

An innovative fleet management system
Specially designed and produced for corporate fleet customers, the new Partner can be equipped with a module allowing automatic and periodic feedback to fleet managers of information such as distance travelled and maintenance issues. This innovative service, marketed as an accessory with a service contract, transmits data in GPRS mode to a PSA Peugeot Citron service desk. The data can then be analysed directly by the operators in either Excel format or INTERPARC, a fleet management and monitoring system accessible online and marketed by Peugeot Parc Alliance. The module is connected directly into the vehicles electrical multiplex network and uses an aerial and a SIM card to send the information. It can be used to optimise the running costs of fleet vehicles, and provide such information as: The major benefit of this service, which has no competitor on the market to date, is that it provides reliable information directly from vehicles, without any intervention on the part of users or fleet managers, without loss of time and without the deployment of a special infrastructure. In total, 39 information sources can be monitored. Total distance covered. Mileage until next service. Time until next service. Fluid level fault (oil, water, etc). Coolant temperature fault. Oil pressure.

The Site Pack

The design of the new Partners suspensions enables it to be driven comfortably on all road surfaces. However, for professional users wishing to improve driving efficiency on relatively difficult terrain, such as construction sites for example, it is possible to choose an optional Site Pack which includes a protective sump guard under the engine, special 195/70 R 15 tyres, and increased ground clearance, raised by 10 mm.
A simple commercial range
The commercial range is simple and includes two levels of finish.

Options + Accessories

COMFORT PACK *
1 Sliding side door Multi-Flex bench seat Plus Pack (Plip, one-touch electric windows, electrically folding and heated door mirrors) Wheel trims Synthetic cab floor covering TPO covering in load area Removable lamp in the load area Body colour upper surround on front air inlet

COMFORT

ABS + AFU Drivers air bag Central locking Electric windows 195/65 R 15 wheels Asymmetric panelled rear doors Overhead storage Carpeted cab floor covering Full trim under the window line in the load area Drivers ladder frame protector
* : The content of the Comfort Pack level may vary according to country.

In addition to the standard equipment, options and a wide range of accessories for professional use (ladders, roof racks, etc) are also available.

Running costs

Vehicle running costs are an important factor to businesses and self employed people. This is also a major consideration when choosing a vehicle. To help lower running costs, the new Partner embodies the concept of extended servicing. This consists of not linking the replacement of particular parts to the oil change intervals. As a result, the service life of certain parts such as the (air filter, pollen filter, spark plugs, diesel filter, brake pads, etc) has been extended. These features allow the new Partner to offer particularly low running costs compared to other competitors in the market. The service interval is 20,000 km or 2 years for diesel engines and 30,000 km or 2 years for petrol engines. The timing belt is replaced at 240,000 km on diesel engines and at 160,000 km on petrol engines.

Colours and trims

The new Partner is available in six colours: Solid colours: Bianca White Ardent Red Onyx Black Metallic colours Aluminium Iron Grey Kyanos Blue Two trims are available: On the Comfort finish: Trim: Transcodage Interior ambience: Mistral and Bise Grey Door panels: Bise Grey On the Comfort Pack finish: Trim: Rayediag Interior ambience: Mistral and Bise Grey Door panels: Mistral

Technical Diagrams

Main exterior dimensions of new Partner (mm)

(1) : Long version

Main dimensions of the load area of new Partner (mm)
(1) : long version (2) : with 1 sliding side door (3) : version with 625 kg working load