Pinnacle Video Transfer

EU 8420-00766-01 2003-2008 Pinnacle Systems, Inc.

Table of Contents

Overview....1 Welcome to Pinnacle Video Transfer...1 Connections and Operating Controls on Pinnacle Video Transfer..3 Connections Front Side...3 Connections Rear Side...4 Operating Buttons....4 Step by Step....5 Connect Power Supply and Turn Pinnacle Video Transfer On or Off.5 Connecting a Video Source...6 Connecting the USB Device...7 Special Features of the Various USB Devices...7 Setting the Recording Quality...8 Practical tips for the selection of the recording quality..10 Meaning of the LED Displays...11 Recording....12 Normal Recording Mode...12 Forced Recording Mode....13 Maximum File Size for Recordings..13 Stop the Recording...13 Where are the Recordings Saved?..14 Recording Directories on PSP, USB Flash Memory Sticks and External USB Hard Drives...14 Recording Directory on the Apple iPod..15 Tips and Tricks....16 Firmware Update...16 Resetting Pinnacle Video Transfer...17

Overview

Welcome to Pinnacle Video Transfer
Dear customer, We would like to thank you for choosing a Pinnacle product. You have made an excellent decision. You now have all the options you need for recording your favorite movies or TV shows from an analog video source directly onto your mobile USB mass storage device so that you can watch them later. You don't even need a computer to do this. Pinnacle Video Transfer is an external device that you connect to your video source and a mobile storage device. You can start recording right away without having to worry about configuring anything. The recordings are made using the high-quality video compression format H.264. This format is also very well suited to further processing on a PC with VideoSpin, the new Pinnacle video editing software. You can download the software free from http://www.videospin.com at any time and install it on your PC. Then you only need to copy the video which you have recorded on the mobile storage device (e.g. an external USB hard disk or a USB flash memory stick) on to your PC and you can start video editing. The following devices can be used as (analog) video sources: Video recorder DVD player Video camera Set-top box Television (when equipped with a fully connected SCART connector) Game consoles Any device that provides an analog video signal
Pinnacle Video Transfer The following USB devices are suitable for direct recording using Pinnacle Video Transfer: Apple iPod Video, firmware version 1.21 or later iPod Classic, iPod Nano (3rd generation), firmware version 1.03 or later Sony Playstation Portable (PSP), firmware version 2.81 or later, Sony Playstation Portable Slim USB Flash memory sticks External USB hard drives Files recorded on a USB Flash memory stick or an external USB hard disk with the aid of Pinnacle Video Transfer can be transferred to the following devices via iTunes: Apple iPod touch Apple iPhone Don't forget to register your product at http://www.pinnaclesys.com/register. As a small "thank you", you will be able to download a software program for making backups to your computer of recordings made using Pinnacle Video Transfer on the iPod. We hope you have lots of fun with our product! Your Pinnacle Team
Connections and Operating Controls on Pinnacle Video Transfer

Connections Front Side

Power adapter connector When the external power supply unit contained in the package is connected to Pinnacle Video Transfer and turned on, any connected USB device, for example, your iPod, is also powered or charged. For this to work properly, the connected USB device must also support this function. Note that you may require special device-specific USB cables. These cables are not included in the box contents.
USB-A 2.0 port For connecting USB devices USB-B 2.0 port Reserved for future use

Connections Rear Side

The video source connections are located on the rear side of Pinnacle Video Transfer. Audio input left Audio input right Composite video input S-video input

Operating Buttons

ON / OFF / MODE REC For starting and stopping a recording

Step by Step

Connect Power Supply and Turn Pinnacle Video Transfer On or Off
Connect Pinnacle Video Transfer to a power source using the power unit included in the box. To turn Pinnacle Video Transfer on, briefly press the MODE button. All the blue LEDs on Pinnacle Video Transfer should then briefly light up. To turn Pinnacle Video Transfer off, press the MODE button for longer than two seconds.
Connecting a Video Source
To connect the video source to Pinnacle Video Transfer, you need to use the cable included in the box (composite video cable and stereo-audio cable (RCA)). Connect the video and audio outputs on the video source to the corresponding video and audio inputs on Pinnacle Video Transfer. The signal recognition process begins and the respective input LED constantly glows red. The process is complete as soon as the respective input LED has changed to blue. Do not disconnect the affected inputs from the Pinnacle Video Transfer device whilst the signal recognition process is running. If there is a video signal coming from both video inputs (composite and S-video) at the same time, Pinnacle Video Transfer automatically uses the input that was first detected as a valid video signal as the source.

Connecting the USB Device
Connect the storage device you are using to the USB-A 2.0 port on Pinnacle Video Transfer. The device recognition process begins and the USB port LED constantly glows red. If this process takes longer, a running light formed by the three quality LEDs starts up in addition to the constantly glowing red light. The device recognition process is finished as soon as the running light stops and the USB port LED has changed to blue. Do not disconnect the USB device from the Pinnacle Video Transfer device whilst the device recognition process is running.
Special Features of the Various USB Devices
In order to ensure your device is able to make recordings using Pinnacle Video Transfer, note the following features associated with the various devices: Apple iPod The device hard drive must be formatted as FAT32. Check to make sure that the option Manually manage music and videos is activated in the iTunes program. Otherwise, any videos you have recorded on your iPod might be deleted when you connect the iPod to the computer. Sony Playstation Portable (PSP) The device needs to be in USB mode. To do this, select Settings to the left, vertically scroll to the USB connection option and then confirm with X. USB Flash memory sticks Suitable formats are FAT16 and FAT32. External USB hard drives Suitable formats are FAT16 and FAT32. Devices using HUBs are not supported by Pinnacle Video Transfer.
Setting the Recording Quality
Before you start recording, select the recording quality you prefer. Repeatedly press the MODE for less than one second to switch between the 3 possible qualities Good, Better and Best. The best recording quality is achieved if the input signal is clear and without noise and hissing, and if the Pinnacle Video Transfer S-Video input is used. The currently selected quality is indicated by the LEDs beneath the MODE button:
Good One LED is constantly lit in blue.
Better Two LEDs are constantly lit in blue.
Best All three LEDs are constantly lit in blue.
Depending on the USB device, the following describes these 3 qualities in detail: iPod Good*
Video 320xkbps video 96 kbps stereo audio 48 KHz Video 320xkbps video 128 kbps stereo audio 48 KHz Video 640x480 1.5 Mbps video 128 kbps stereo audio 48 KHz
Video 320xkbps video 64 kbps stereo audio 48 KHz Video 320xkbps video 96 kbps stereo audio 48 KHz Video 320xMbps video 128 kbps stereo audio 48 KHz

Other devices

Video 320xkbps video 64 kbps stereo audio 48 KHz Video 640x480 1.2 Mbps video 128 kbps stereo audio 48 KHz Video 720x576 (PAL, SECAM) / 480 (NTSC) 1.5 Mbps video 192 kbps stereo audio 48 KHz

Better*

* In view of the constant technical further development and improvement of this product we reserve the right to make changes.

Step by Step The maximum recording duration varies depending on the selected recording quality and the recording capacity of the connected USB device. We have defined the following reference values for the maximum recording duration especially for you: iPod Video, 30 GB Good* Better* Best*
85 hours 61 hours 38 hours

PSP, 2 GB

7.5 hours 5.5 hours 2.5 hours

Flash Stick, 4 GB

11 hours 5.5 hours 3 hours

USB hard disk, 250 GB

640 hours 320 hours 187 hours
* The better the recording quality, the greater the data rate required of the USB device. Should you discover defects in the recording, for example a juddery picture, crackling noises in the audio signal or audio/video synchronization problems, the following measures can help: Select the next lower recording quality on the Pinnacle Video transfer device or Use a better quality USB device for the recording, for example an external USB hard disk.
The MODE button is not active during a running recording; this means that Pinnacle Video Transfer cannot be turned off and the recording quality currently set cannot be changed.
Practical tips for the selection of the recording quality
Best quality Recording on USB sticks and USB hard disks in Best quality provides interlace pictures, i.e. both video signal half-pictures are stored unchanged. This recording format gives the best possible quality for subsequent video editing (e.g. with Pinnacle VideoSpin, see http://www.videospin.com ) and possible DVD creation. Comb-shaped effects at the edge of movement can be seen when such recordings are played back on the PC with QuickTime Player or Windows Media Player. If you wish to eliminate these effects during viewing we recommend a player with de-interlacing functionality (for example the VLC Player, see http://www.videolan.org). Good or Better quality If you record files on a USB stick or a USB hard disk in order to Subsequently make further use of them on an iPod touch or an iPhone or To view them on a PC or to place them in a video portal via the PC, we recommend that you select Good or Better recording quality from the start.
Meaning of the LED Displays
The following information is indicated by the LEDs at the video and audio inputs and at the USB port on Pinnacle Video Transfer: LED off The corresponding input is not selected, no device is connected or a connected device has not been detected. LED constantly lit blue The corresponding input is selected and the video/audio signal has been detected. The connected USB device has been detected. You can disconnect the device from Pinnacle Video Transfer at any time. LED constantly lit red A recording is in progress or the device is being accessed. Please do not disconnect the corresponding inputs and USB devices from Pinnacle Video Transfer. LED running light A device or signal recognition process is running. Please do not disconnect the affected inputs and USB devices from the Pinnacle Video Transfer device. LED blinking red The start of the recording was not successful or the recording was canceled due to an error, for example: The video signal was interrupted for more than 10 seconds during recording. When the recording was started, there was no USB device connected. When the recording was started, there was no USB device detected. The USB device was disconnected from Pinnacle Video Transfer during recording. The USB storage device memory is full. File numbering has already reached maximum or the USB device already contains a file with the same name.

Recording

Before you start recording, make sure that both the video source and the USB device are properly connected and that you have set the recording quality you want. Depending on how long you press the REC button, the recording can be started in one of two different modes.

Normal Recording Mode

When you press the REC button for less than two seconds, normal recording mode is started. Note that recording can begin only if: The connected USB device has been detected by Pinnacle Video Transfer; in other words, the LED at the USB port must be constantly lit blue. A valid video signal is detected; in other words, the LED at the video input must be constantly lit blue. The memory on the connected USB device is not full. The USB device does not contain a recorded file with the same name.
Recording is automatically suspended, if: The video signal is interrupted for more than 10 seconds. The memory of the connected USB device is full.

Forced Recording Mode

If you press the REC button longer than two seconds, forced recording mode is started. As opposed to normal recording mode: Any file with the same name already on the USB device will be overwritten by the recording procedure.
Recording is automatically suspended, if: The memory of the connected USB device is full.
Maximum File Size for Recordings
The maximum size of a recorded file is determined by the storage format and the limits set depending on the device. When using the storage format FAT32, the maximum file size is, for instance, 4 GB. The recording is automatically suspended when the maximum file size is reached, and is then resumed in a new file. The new file is automatically numbered in ascending sequence. Suspending the recording takes a few seconds; this means that the video images sent during this time are lost. If no new recorded file can be created, for example, because the USB device memory is full, the recording is not resumed.

Stop the Recording

To stop the recording, briefly press the REC button. Depending on the length of the recording and the USB device connected, it can take a few seconds before the USB device can be removed. This waiting time is indicated by a running light formed by the three quality LEDs. The USB device can be removed as soon as the running light stops and the LED on the USB port has changed to blue. The minimum recording duration is 30 seconds. If a recording is to be stopped after less than 30 seconds it runs on until these 30 seconds have elapsed.

Where are the Recordings Saved?
Recording Directories on PSP, USB Flash Memory Sticks and External USB Hard Drives
The recordings are stored in the VIDEO directory located in the main directory. If this directory does not yet exist on your USB device, it will be automatically created when recording starts. The name of the file is "vidxxxxx.mp4", where "xxxxx" stands for a 5-digit number. If the device does not yet contain any recordings, the first file name will be "vid00001.mp4". For each successfully started recording, the file name number is automatically increased by 1. If one or more files with the file name "vidxxxxx.mp4" already exist on the connected USB device when a new recording is started, the new recording is labeled with the highest number of any previous recording plus 1. If a file named "vid99999.mp4" already exists on the USB device, a new recording cannot be started in normal mode until this file is deleted. A recording can be started in forced mode without having to delete this file beforehand. To do this, press the REC button for more than two seconds. The file already on the device is overwritten. On the PSP interface, the recorded videos are shown in the Video area.
Recording Directory on the Apple iPod
The recordings are stored in the iPod_Control\Music\F99 directory located in the main directory. If this directory does not yet exist on your iPod, it will be automatically created when recording starts. The name of the file is "xxxx.mp4", where "xxxx" stands for a 4-digit number. If your iPod does not yet contain any recordings, the first file name will be "0001.mp4". For each successfully started recording, the file name number is automatically increased by 1. If one or more files with the file name "xxxx.mp4" already exist on the connected iPodo when a new recording is started, the new recording is labeled with the highest number of any previous recording plus 1. If a file named "9999.mp4" already exists on the iPod, a new recording cannot be started in normal mode until this file is deleted. A recording can be started in forced mode without having to delete this file beforehand. To do this, press the REC button for more than two seconds. The file already on the device is now overwritten. In the iPod playlist, files recorded using Pinnacle Video Transfer are displayed formatted as "Pinnacle video xxxx", where "xxxx" stands for the consecutive 4digit number of the individual file.

Tips and Tricks

Firmware Update
Pinnacle Video Transfer uses firmware that contains important programs for the entire system. In order to take advantage of the latest product improvements, you should regularly check the Pinnacle Web site http://www.pinnaclesys.com/support for the latest firmware updates. To update your firmware, please do the following: Download the corresponding file from the Pinnacle Web site http://www.pinnaclesys.com/support, unpack it and then follow the instructions in the Readme file that came with the download.
Do not turn off Pinnacle Video Transfer while updating the firmware and do not remove the power cable.
Resetting Pinnacle Video Transfer
If unexpected malfunctions occur (for example, the desired functions are no longer executed, the LED display is defective, the device no longer reacts), it may be necessary to reset Pinnacle Video Transfer. To do this, turn on the device, remove the power cable and then reconnect the power cable. All the device settings are reset to the factory settings.

Just Press & Go

Product Overview
Pinnacle Video Transfer is a compact, easy-to-use USB 2.0 device that lets you copy a video source to any USB 2.0 mass storage device, such as a video iPod, PSP, USB 2.0 flash drive or USB 2.0 hard drive. You dont need a PC to use Pinnacle Video Transfer. It transfers video directly from the source to the storage device.

Product Descriptions

25-Word Description
Recording videos has never been easier. With Pinnacle Video Transfer you can transfer videos, like TV shows and movies, to your iPod, PSP or USB 2.0 drive without using a PC.

50-Word Description

Want to watch TV shows and movies on your iPod or PSP? Make a digital copy of precious home movie tapes? Back up holiday videos when away from home? At the touch of a button, Pinnacle Video Transfer rapidly records video in MPEG-4 quality onto any USB 2.0 storage device without using a PC.

100-Word Description

Want to watch TV shows and movies on your iPod or PSP? Make a digital copy of precious home movie tapes? Back up holiday videos when away from home? At the touch of a button Pinnacle Video Transfer rapidly records video in MPEG-4 quality onto any USB 2.0 storage device without using a PC. It provides highquality MPEG-4 encoding in H.264 at up to 720x480/576 (NTSC/PAL) resolution and supports multiple inputs including SVideo, Composite video and stereo audio. Video transfer is fast thanks to high-speed USB 2.0 technology, and the compact size makes it perfect for backing up holiday videos.
With the press of a button Pinnacle Video Transfer lets you: Record TV shows and movies to your Apple iPod or Sony PSP Digitize home movies to a USB 2.0 hard drive for safe keeping Back up vacation videos on a portable USB 2.0 storage device Directly record gaming sessions from your favorite console to a mobile device Pinnacle Video Transfer is the easy way to copy video to a USB 2.0 mass storage device no PC required.

Technical Specifications

Input Connectors Composite Video: 1xRCA (PAL-SECAM-NTSC) S-Video: 1xY/C (PAL-SECAM-NTSC) Stereo Audio: 2xRCA Capture Format: H.264 (MPEG-4) USB Output (devices not included) Sony PSP (firmware version 2.81 or higher) Apple iPod Video, Nano and Classic (FAT32 only, firmware version 1.2.1 or higher) iPod Touch and iPhone are supported via iTunes USB2.0 Hard Disk Drive (FAT16/32 only) Flash Memory Stick USB 2.0, (FAT16/32 only). Video quality dependant on stick data rate.

Key Features

PC-less capture of your video to an iPod, PSP, USB 2.0 hard drive or USB Flash Stick. One-touch start/stop recording from any video source including a TV, DVD player, PVR, camcorder, set-top box or gaming console. High-quality MPEG-4 encoding in H.264 at up to 720x480/576 (NTSC/PAL) resolution*. Multiple capture options for mobile devices, full-screen PC and even video editing or DVD burning.* S-Video, composite video and stereo audio analogue inputs. Compact size makes it perfect for travelling. Recharges iPod battery during video transfer (cable not included).

Package Contents

Pinnacle Video Transfer Hardware Audio/Video cable 3 x RCA Power supply unit (110v-230v) Quick Start Guide
*Full D1 quality capture without de-interlacing in Best mode for optimal TV viewing experience. Refer to capture quality chart for details.

SRP: $129.99

Pinnacle Systems, Inc. - 280 N. Bernardo Avenue - Mountain View - CA - 94043 - United States 2003-2007. Pinnacle Systems, Inc. and its licensors and/or affiliates. All rights reserved. Pinnacle Systems, Pinnacle and the Pinnacle Pinwheel logo are registered trademarks and/or trademarks of Pinnacle Systems, Inc. and its affiliates in the United States and other countries. All other trademarks are the property of their respective owners. Product information and specifications are subject to change without notice or obligation.