SAMSUNG TECHWIN CO., LTD. OPTICS & DIGITAL IMAGING DIVISION 145-3, SANGDAEWON 1-DONG, JUNGWONGU,SUNGNAM-CITY, KYUNGKI-DO, KOREA 462-121 TEL : (82) 31-740-8086,8088, 8090, 8092, 8099 FAX : (82) 31-740-8398, 8111 SAMSUNG OPTO-ELECTRONICS AMERICA, INC. HEADQUARTERS 40 SEAVIEW DRIVE, SECAUCUS, NJ07094, U.S.A. TEL : (1) 201-902-0347 FAX : (1) 201-902-9342 WESTERN REGIONAL OFFICE 18600 BROADWICK ST., RANCHO DOMINGUEZ, CA 90220, U.S.A. TEL : (1) 310-537-7000 FAX : (1) 310-537-1566 SAMSUNG OPTO-ELECTRONICS UK LIMITED SAMSUNG HOUSE 1000 HILLSWOOD DRIVE HILLSWOOD BUSINESS PARK CHERTSEY KT16 OPS U.K. TEL : +44 (0) FAX : +44 (0) 1932 455325
SAMSUNG OPTO-ELECTRONICS GMBH AM KRONBERGER HANG 6 D-65824 SCHWALBACH/TS., GERMANY TEL : (49) FAX : (49) SAMSUNG FRANCE S.A.S. BP 51 TOUR MAINE MONTPARNASSE 33, AV.DU MAINE 75755, PARIS CEDEX 15, FRANCE HOTLINE PHOTO NUMRIQUE : 37 27(Numro Vert-Appel Gratuit) TEL : (33) 1-4279-2282/5 FAX : (33) 1-4320-4510 SAMSUNG TECHWIN MOSCOW OFFICE KORP. 14 37-A LENNINGRADSKY PR-KT MOSCOW, 125167, RUSSIA TEL : (7) 095-258-9296, 9298, 9299 FAX : (7) 095-258-9297 TIANJIN SAMSUNG OPTO-ELECTRONICS CO.,LTD. 7 PINGCHANG ROAD NANKAI DIST., TIANJIN P.R CHINA POST CODE:300190 TEL : (86) 22-2761-8867 FAX : (86) 22-2761-8864
Thank you for buying a Samsung Camera. This manual will guide you through using the Digimax 360, including capturing images, downloading images and using the MGI PhotoSuite III SE software. Please read this manual carefully before using your new camera.
Internet address - http : //www.samsungcamera.com/ The CE Mark is a Directive conformity mark of the European Community (EC)

6806-1576

ENGLISH

Instructions

Use this camera in the following order
Before connecting the camera to a PC, via the USB cable, you will need to set up the camera driver. Install the camera driver that is contained in the Application S/W CD-ROM.(p.94)

Set up the camera driver

Take a picture (p.25)

Take a picture

Insert the USB cable
Insert the supplied USB cable into the PC USB port and the camera USB connection terminal.(p.82)

Check the camera power

Check the camera power. If the power is turned off, slide the camera switch to power it on.(p.28)

Check [Removable Disk]

Open Windows EXPLORER and search for [Removable Disk].(p.83)

Contents

Getting to know your camera About the icons Danger Warning Caution Special features This digital camera can be used for Manufacturer's contents Identification of features Front & Top Back & Bottom Side 5-function button Camera status lamp Mode dial Connecting to Power Source Attaching the strap Instructions on how to use the memory card Inserting the memory card Removing the memory card Using the camera button to adjust the camera POWER switch SHUTTER button LCD button MENU button MACRO button WIDE / TELE button Voice memo / UP button Metering / Down button Flash / left button Self-timer / Right button OK button Using the LCD monitor to adjust the camera Size Quality Effect Shooting Exposure ISO White balance Scene 38

RECORDING

LCD monitor indicator Starting recording mode 23 25
Starting the play mode LCD monitor indicator 49 51
LCD button Menu button Delete button Thumbnail / Enlargement button Left / Right / OK button Voice memo / Up button Play & Pause / Down button Setting up the play back function using the LCD monitor Slide show Protect Delete all Copy to card DPOF : Standard DPOF : Index 65 Software Notes About the software Setting up the application software Removing the USB Driver for Windows 98SE Setup menu Format File name Power off Language Date setup Imprint Date type User set List of camera function Removable Disk Removing the removable disk Setting up the USB Driver for MAC Using the USB Driver for MAC Digimax Viewer MGI PhotoSuite III SE FAQ Sound LCD brightness Video out Connecting to an external monitor Quick view Starting PC mode Important notes Warning indicator Before contacting a service center Specifications 87 90

SOFTWARE

Getting to know your camera
Thank you for buying a Samsung Digital Camera.
Prior to using this camera, please read the user manual thoroughly. When you require After Sales service, please bring the camera and the cause of the camera malfunction (such as Batteries, Memory card etc.) to the A/S center. Keep the manual in a safe place.

About the icons

This manual contains instructions on using this camera that will help you to use this camera safely and correctly. This will help prevent danger and injury to others.

DANGER

DANGER indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury.

WARNING

WARNING indicates a potentially hazardous situation, which, if not avoided, could result in death or serious injury.

CAUTION

CAUTION indicates a potentially hazardous situation, which, if not avoided, may result in a minor or moderate injury.

NOTICE

NOTICE indicates a factor, which, if not avoided, may result in camera malfunction or poor image quality.

INFORMATION

INFORMATION indicates a factor, which should assist further in the operation of the camera.

Danger

Do not attempt to modify this camera in any way. This may result in fire, injury, electric shock or severe damage to you or your camera. Internal inspection, maintenance and repairs should be carried out by your dealer or Samsung Camera Service Center. Please do not use this product in close proximity to flammable or explosive gases, as this could increase the risk of explosion.
Should any form of liquid or a foreign object enter the camera, do not use it. Switch off the camera, and then disconnect the power source (batteries or AC Power Adapter). You must contact your dealer or Samsung Camera Service Center. Do not continue to use the camera as this may cause a fire or electric shock.
Do not insert or drop metallic or inflammable foreign objects into the camera through access points e.g. CARD slot and battery chamber. This may cause a fire or electric shock.
Do not operate this camera with wet hands. This could pose a risk of electric shock.

Warning

Do not use the flash in close proximity to people or animals. Positioning the flash too close to your subjects eyes, may cause eyesight damage. When taking photographs, never point the lens of the camera directly into very strong light. This may result in permanent damage to the camera or your eyesight.

Mode dial

You can select the desired working mode by using the mode dial located on the top of the camera. This digital camera has 4 working modes. These are listed below.

MOVIE CLIP

Movie clip mode A movie clip can be recorded for as long as the available recording time of the memory capacity allows. Image size and type are listed below. - Image size : 320X240 - File type : *.AVI

STILL IMAGE

Still image mode This mode is used for still image shots. Macro shot W : 6cm ~ 80cm Normal shot 80cm ~ infinity.

T: 40cm ~ 80cm

Play mode In this mode, the stored images on the memory can be viewed on the LCD monitor on the back of the camera or on an external monitor using a Video connection terminal. A recorded audio file can also be played back in this mode.
Setup mode In this mode, you can set up basic settings such as Format, File name, Auto power off, Date setup, Date imprint, Date type, User set, Sound, LCD brightness, Video out, Quick view.
Connecting to a Power Source
There are two ways in which to provide the camera with power. You can use batteries or alternatively, you can use an AC(100 ~ 250V) Adapter (DC 3.3V 2.0A). We recommend using batteries for a digital camera.(Within a year from the date of manufacture) The batteries are listed below.
Non rechargeable batteries : AA type CR-V3 type Rechargeable batteries : AA type CR-V3 type Battery pack Alkaline, Ni-Mn, Ni-Zn, Lithium Lithium Ni-MH, Ni-Cd (over 1000mA) Digimax Battery I-Pack(SBP-1103) Digimax Battery Pack(SBP-3603)

[ AA type battery ]

[ CR-V3 type battery ]

[ Battery pack ]

Important information about battery usage
- It is easy to buy alkaline batteries. However, the duration for using batteries varies in accordance with the battery manufacturer or the photographic conditions. When the camera is not used, turn off the camera power. - Do not recharge the non rechargeable batteries. It may cause an explosion. - Please remove the batteries if the camera will not be used for long periods. Batteries can lose power over time and are prone to leaking if kept inside the camera. - We recommend high capacity ALKALINE batteries as manganese batteries cannot deliver sufficient power. - Low temperatures (below 0 ) can affect the performance of the batteries and you may experience reduced battery life. - Batteries will usually recover at normal temperatures. - Do not use old and new batteries at the same time. - During extended use of the camera, the camera body may become warm. This is perfectly normal. - If you are planning to use this camera for long periods of time, it is advisable to use an AC adapter(3.3V 2.0A).

STILL IMAGE 1/2 MOVIE CLIP

W.BALANCE EFFECT

AUTO NORMAL

EXIT:MENU

CHANGE:
3. Press the RIGHT button and the cursor will shift to the [EFFECT] sub menu. 4. Select the desired sub menu by pressing the UP/DOWN button.
EFFECT NORMAL B&W SEPIA BACK: SET:OK
NORMAL : No effect is added to the image. B&W : Converts the image to black and white. SEPIA : Converts the image to a sepia tone 5. Press the OK button to confirm the setting. 6. Press the menu button and the menu display will disappear. Take a picture.

Shooting

You can select continuous shooting or AEB(Auto Exposure Bracket ) shooting in this menu.
1. Rotate the mode dial to the STILL IMAGE mode and press the MENU button. 2. Select the [SHOOTING] menu by pressing the UP/DOWN button.
SIZE QUALITY EFFECT SHOOTING NORMAL
3. Press the RIGHT button and the cursor will shift to the [SHOOTING] sub menu. 4. Select the desired sub menu by pressing the UP/DOWN button. 5. Press the OK button to confirm the setting. SINGLE : you can take only one picture at a time. CONTINUOUS : In this mode, you can capture moving subjects continuously. AEB : In this mode, you can take a 3-image bracket(-0.5EV, 0.0EV, +0.5EV) of a scene. When you select continuous shooting, a window will display as shown alongside. Select the number of continuous shots by pressing the UP/ DOWN button. Depending on the memory capacity, the number of continuous shots may vary. 6. Press the menu button and the menu display will disappear. Take a picture.
SHOOTING SINGLE CONTINUOUS AEB BACK: SET:OK

# OF SHOOT

SET:OK
The flash mode is set to "flash off" in continuous shooting and AEB shooting. After completing the continuous or AEB shot, the shooting mode is changed to [SINGLE] automatically. Once a continuous sequence has begun, it will continue until the selected number of shots has been taken. Releasing the shutter button will not interrupt this function.
To take continuous shots, the number of available shots must be more than 2 because the minimum numbers of continuous shots permitted are 2. To take the AEB shots, the number of available shots must be more than 3 because of the same reason. Camera shake can be a problem when using the AEB shooting mode and it takes time to store the AEB image to the memory. We recommend using a tripod. In continuous shot and AEB mode, the digital zoom function will not operate. When using the 16MB internal memory, the specified continuous shooting capacity will be as follows. (These figures are intended as an indication of expected performance)

Exposure

This camera automatically adjusts the exposure according to the ambient lighting conditions. However, you can select the exposure value by using the [EXPOSURE] sub menu. In the STILL IMAGE mode, you can select the exposure value. If you increase the exposure value, the image will be brighter. If you decrease the exposure value, the image will be darker.
1. Rotate the mode dial to the STILL IMAGE mode and press the MENU button. 2. Select the [STILL IMAGE 2/2] menu by pressing the RIGHT button. 3. Select the [EXPOSURE] menu by pressing the UP/DOWN button.

STILL IMAGE 2/2

EXPOSURE ISO W.BALANCE SCENE EXIT:MENU
+0.0 EV AUTO AUTO NORMAL CHANGE:
4. Press the RIGHT button and the cursor will shift to the [EXPOSURE] sub menu. 5. Select the desired sub menu by pressing the UP/DOWN button.

EXPOSURE

6. Press the OK button to confirm the setting. 7. Press the menu button and the menu display will disappear. Take a picture.
Exposure compensation setting range : -2.0 ~ +2.0 EV (0.5 EV steps) This change to the exposure will remain until the camera is switched off. When the camera is turned on again, the exposure compensation setting returns to 0.0EV (discarding the exposure compensation). When you have selected a change in exposure value, the value is displayed on the LCD. Decreasing or increasing the exposure value may lead to images being under or over exposed (too dark or too bright). Review your images using the LCD monitor to check that they have been successful.
You can select the camera s sensitivity to light by selecting the ISO sub menu. The speed or specific light-sensitivity of a camera is rated by ISO numbers. In the STILL IMAGE mode, you can select the ISO value. The higher the number, the more sensitive it is to light. As with film, the higher speeds usually induce more electronic noise so the image gets grainier.
1. Rotate the mode dial to the STILL IMAGE mode and press the MENU button. 2. Select the [STILL IMAGE 2/2] menu by pressing the RIGHT button. 3. Select the [ISO] menu by pressing the UP/DOWN button.
4. Press the RIGHT button and the cursor will shift to the [ISO] sub menu. 5. Select the desired sub menu by pressing the UP/DOWN button. AUTO : The camera's sensitivity is automatically changed by variables such as lighting value or subject brightness. 100/ 200/ 400 : In the same lighting conditions, the higher the ISO value is, the faster the shutter speed will be. However, the images can be saturated in very bright conditions. 6. Press the OK button to confirm the setting. 7. Press the menu button and the menu display will disappear. Take a picture.

Pressing the menu button

PLAY 1/2
SLIDE SHOW PROTECT DELETE ALL COPY TO CARD

03 SEC

Menu off

Menu on

Delete(
This deletes an image stored on the internal memory or memory card.
1. Select an image that you want to delete by pressing the LEFT / RIGHT button.
2. Press the DELETE( ) button and a message will display as shown alongside on the LCD monitor.
Pressing the LEFT button : the deletion is cancelled. Pressing the OK button : Once an image has been deleted, the next image in the sequence will appear on the LCD display. (If the last stored image is deleted, the previous image will appear.)
DELETE IMAGE NO : YES : OK
Before deleting images from the camera, you should protect or download images to your computer that you wish to keep.

Thumbnail(

) / Enlargement(
You can view up to 9 images at a time and enlarge the selected image. Thumbnail button
1. Press the thumbnail button in the normal display mode. 2. 9-images will be displayed at the same time on the LCD monitor. The thumbnail display will highlight the image that had been showing at the time the thumbnail mode was selected. 3. Press the 5-function button to move to the desired image. The selected image is highlighted.
Pressing the thumbnail( ) button
Pressing the enlargement( ) button Highlighted image Normal display mode Thumbnail display mode
Icons are displayed to indicate the type of file selected. ( ) : Movie clip file ( ) : Protect indicator ( ) : DPOF indicator ( ) : Voice memo indicator 4. Pressing the enlargement( ) button will zoom back to the original full sized image.

Enlargement button

1. Select an image that you want to enlarge( ) and press the enlargement button. 2. The image will be enlarged ratio by 0.5 steps. 3. Different parts of the image can be viewed by pressing the 5 function button.
Pressing the enlargement( ) button
Pressing the thumbnail( ) button Normal display mode Enlarged display mode
4. Pressing the thumbnail(
) button will zoom back to the original full sized image.
If the image is enlarged, the enlargement indicator monitor. Movie clips can t be enlarged. If an image is enlarged, a loss of quality may occur. is displayed on the LCD
Left( )/ Right( )/ OK button
Left/ Right/ OK button activates the following.
Left button : When the menu is displayed on the LCD monitor, pressing the left button makes the cursor shift to the main menu. Right button : When the menu is displayed on the LCD monitor, pressing the right button makes the cursor shift to the sub menu. OK button : When the menu is displayed on the LCD monitor, the OK button is used for confirming data that is changed by using the 5 function button.

Voice(

) memo / Up(
When the menu is displayed on the LCD monitor, pressing the UP button makes the menu cursor move up or change the sub menu value. When the menu is not displayed on the LCD monitor, the UP button operates as the voice memo button.You can add your audio to a stored still image.
1. Press the LEFT/ RIGHT button to select an image that you wish to add sound to. 2. Press the voice memo button ( ) and the voice memo indicator will display. The camera is now ready to record a voice memo.
3. Press the shutter button to start recording. The [RECORDING] message will be displayed on the LCD monitor (as shown) and the voice is recorded to the still image for 10 seconds. The recording can be stopped by pressing the shutter button again.
4. The ( ) icon will be displayed on the LCD monitor after finishing the voice memo.
The voice memo can t be recorded onto a movie clip file. A distance of 40cm between you and the camera (microphone) is the best distance to record sound.

Play & Pause(

When the menu is displayed on the LCD monitor, pressing the down button makes the menu cursor move down. When the menu is not displayed on the LCD monitor, press the down button to play and pause the movie clip, slide show or a still image that has a voice memo.
1. Press the LEFT/ RIGHT button to select an image that has voice memo or is a movie clip. 2. Pressing the play & pause button activates the following. - If an image is showing, but there is no sound (or movement) : Plays the voice memo or starts the movie clip. - If the image is playing : The progress is paused. - If the play & pause button is pressed when the image is paused, the sound or movement will resume. Pressing the Play & pause ( ) button
Pressing the Play & pause ( ) button

PAUSE !

Initial play mode

Playing with Voice

3. To select another image, press the LEFT/RIGHT button after the playing back is finished or paused.
Setting up the play back function using the LCD monitor
PLAY mode functions can be changed by using the LCD monitor. In the PLAY mode, pressing the MENU button displays the menu on the LCD monitor.
Main menu Sub menu Secondary menu

SLIDE SHOW

01 ~ 05 SEC
ONE IMAGE PROTECT ALL IMAGES

LOCK UNLOCK LOCK UNLOCK

DELETE ALL
NO YES NO YES ONE IMAGE 0 ~ ~ 30

COPY TO CARD

STANDARD ALL IMAGES INDEX PRINT NO YES

Slide show

Images can be displayed continuously at pre-set intervals. You can view the slide show by connecting the camera to an external monitor.
1. Rotate the mode dial to the PLAY mode and press the MENU button. 2. Select the [SLIDE SHOW] menu by pressing the UP/DOWN button. 3. Press the RIGHT button and the cursor will shift to the [SLIDE SHOW] sub menu.

DATE TYPE Y/M/D M/D/Y D/M/Y BACK: SET:OK

User set

This menu allows you to save the changed camera settings. When the camera is turned on, the saved camera menu will be adopted.(Effect, Exposure, ISO, W.Balance only)
1. Rotate the mode dial to SETUP mode and the [SETUP 1/3] menu will display. 2. Select the [SETUP 2/3] menu by pressing the RIGHT button. 3. Select the [USER SET] menu by pressing the UP/DOWN button. 4. Press the RIGHT button and the cursor will shift to the [USER SET] sub menu. 5. Select the desired sub menu by pressing the UP/DOWN button and press the OK button. Selecting [NO] : SETUP menu will display without resetting Selecting [YES] :All the changed camera settings are saved. Selecting [RESET] :All the camera settings are changed to the camera default settings except for [LANGUAGE], [DATE SETUP] and [VIDEO OUT] sub menu.
SETUP 2/3 USER SET NO YES RESET BACK: SET:OK

List of camera function

: Default : There is no associated menu. : The setting is maintained even if the camera power is off. : The setting is returned to default, once the camera power has been switched off. : The setting is returned to default after the function has been completed. : If the [USER SET] menu was set to [YES], the setting is maintained even if the camera power is off. Main menu SIZE Sub menu 2048x1536 2048x1360 1024x768 512x384 QUALITY SUPER FINE FINE NORMAL EFFECT NORMAL B&W SEPIA SHOOTING SINGLE CONTINUOUS AEB EXPOSURE -0.5 ~-2.0 0.0 +0.5 ~+2.0 ISO AUTO 400 W.BALANCE AUTO DAYLIGHT CLOUDY SUNSET FLUORESCENT TUNGSTEN X X X X X X X X X X X X X 320X 240 Fixed Movie clip STILL IMAGE PLAY X X X X X X X X X X X X X X X X X X X X X X X X X X SETUP X X X X X X X X X X X X X X X

X X X X X X X X X X X

SCENE NORMAL NIGHT FLASH AUTO AUTO&RED EYE SLOW SYNCH FILL IN OFF SELF-TIMER ON OFF METERING MULTI SPOT VOICE MEMO(STILL IMAGE) SOUND RECORDING(MOVIE CLIP) PROTECT ON OFF ONE IMAGE ALL IMAGES DELETE ALL NO YES COPY TO CARD NO YES DPOF STANDARD ONE IMAGE ALL IMAGES NO INDEX FORMAT YES NO YES FILE NAME RESET SERIES POWER OFF (03 MIN) YES NO X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X
LANGUAGE ENGLISH S.CHINESE T.CHINESE KOREAN ITALIAN GERMAN FRENCH SPANISH DATE SETUP IMPRINT OFF DATE DATE & TIME DATE TYPE Y/M/D D/M/Y M/D/Y USER SET NO YES RESET SOUND OFF LOW NORMAL HIGH LCD (NORMAL) VIDEO OUT YES NO NTSC PAL QUICK VIEW (01 SEC) YES NO X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X

X X X X X X X X X

Menus are subject to change without prior notice.
A beep will sound when you press the camera button and an error occurs. You can check the camera condition with this function.
1. Rotate the mode dial to SETUP mode and the [SETUP 1/3] menu will display. 2. Select the [SETUP 3/3] menu by pressing the RIGHT button twice. 3. Select the [SOUND] menu by pressing the UP/DOWN button. 4. Press the RIGHT button and the cursor will shift to the [SOUND] sub menu. 5. Select the desired sub menu by pressing the UP/DOWN button. Selecting [OFF] : The sound function is not activated. Selecting [LOW] : The low sound will be activated. Selecting [NORMAL] : The normal sound will be activated. Selecting [HIGH] : The loud sound will be activated. 6. Press the OK button to confirm the setting.

SETUP 3/3

SOUND LCD VIDEO OUT QUICK VIEW
NORMAL NORMAL NTSC 01 SEC CHANGE : SETUP 3/3
SOUND OFF LOW NORMAL HIGH BACK: SET:OK

LCD brightness

You may adjust the LCD brightness.
1. Rotate the mode dial to SETUP mode and the [SETUP 1/3] menu will display. 2. Select the [SETUP 3/3] menu by pressing the RIGHT button twice. 3. Select the [LCD] menu by pressing the UP/DOWN button. 4. Press the RIGHT button and the cursor will shift to the [LCD] sub menu. 5. Select the desired sub menu by pressing the UP/DOWN button. LCD brightness range : -3 ~ NORMAL ~ +3 6. Press the OK button to confirm the setting.

LCD NORMAL BACK: SET:OK

Video out
The Movie output signal from the camera can be NTSC or PAL. Your choice of output will be governed by the type of device (monitor or TV, etc.) to which the camera is connected.
1. Rotate the mode dial to SETUP mode and the [SETUP 1/3] menu will display. 2. Select the [SETUP 3/3] menu by pressing the RIGHT button twice 3. Select the [VIDEO OUT] menu by pressing the UP/DOWN button. 4. Press the RIGHT button and the cursor will shift to the [VIDEO OUT] sub menu. 5. Select the desired sub menu by pressing the UP/DOWN button. 6. Press the OK button to confirm the setting.
VIDEO OUT NTSC PAL BACK: SET:OK
Select the correct movie standard for the outer monitor. PAL mode can support only BDGHI. NTSC : U.S.A, Canada, Japan, South Korea, Taiwan, Mexico. PAL : Australia, Austria, Belgium, China, Denmark, Finland, Germany, U.K., Holland, Italy, Kuwait, Malaysia, New Zealand, Singapore, Spain, Sweden, Switzerland, Thailand, Norway.

PC with processor better than MMX Pentium 233MHz (XP : Pentium II 300MHz) Windows 98/98SE/2000/ME/XP Minimum 32MB RAM (XP : 128MB) 140MB of available hard-disk space USB port CD-ROM drive 800x600 pixels, 16-bit color display compatible monitor (24-bit color display recommended) Power Mac G3 or later Mac OS 9.0 ~ 10.2 Minimum 64MB RAM 110MB of available hard-disk space USB port CD-ROM drive QuickTime 4.0 or later for Movie Clip

Image Play Interface

Power Source
Dimensions (WxHxD) Operating Temperature Operating Humidity Weight Camera Driver Software Application System Requirements

For Windows

For Macintosh
Specifications are subject to change without prior notice.

Software Notes

Please ensure that you read the instruction manual carefully before use. The attached software is a camera driver and image editing software tool for Windows. Under no circumstances should all or part of either the software or the user manual be reproduced. Copyright for both software is licensed only for use with a camera. In the unlikely event of a manufacturing fault, we will repair or exchange your camera. We cannot, however, be held responsible in any way for damage caused by inappropriate use. Using a Hand-made PC or a PC that has not been guaranteed by the manufacturer is not covered by the Samsung warranty. Before reading this manual, you should have a basic knowledge of computers and O/S (Operating Systems). Windows is a registered trademark of Microsoft. Macintosh, Mac is the registered trademark of Apple computer, USA.

About the software

After inserting the CD-ROM provided with this camera into the CD-ROM drive, the following window should automatically run. Before connecting the camera to the PC, you should first install the camera driver.
Setting up the application program
Access to the Samsung camera web-site. Click the [Install] menu on the Autorun frame and all of application software is installed. Camera driver : This enables images to transfer between the camera and PC. This camera uses the USB Storage Driver as the camera driver. You can use the camera as a USB card reader. After installing the driver and connecting this camera to the PC, you can find [Removable Disk] in [Windows Explorer] or [My computer]. A USB Storage Driver is provided only for Windows. A USB Driver for MAC is not included with the Application CD. But you can use the camera with Mac OS 9.0~10.2. Setting up the camera driver for WINDOWS (p.94)

Digimax Viewer 2.0 : This is a program for viewing stored images. You can see the stored images in the memory directly on a PC monitor. You can also copy, move or delete the images and enlarge /downscale the image sizes with Digimax Viewer. For windows only. Setting up Digimax Viewer (p.94) Using Digimax Viewer (p.106)
MGI PhotoSuite III SE : Image editing program Image editing program for downloaded images. For Windows only. Setting up MGI PhotoSuite III SE (p.96) Using MGI PhotoSuite III SE (p.107) Internet link : You can visit the Samsung web-site through the internet. http://www.samsungcamera.com : English http://www.samsungcamera.co.kr : Korean
Check the system requirements (p.91) before setting up the driver. You should allow 5~10 seconds for running the automatic setup program according to the capability of the computer. If the frame does not show, run the [Windows Explorer] and select [Samsung.exe] in the CD-ROM Drive root directory.
Setting up the application software
To use this camera with a PC, install the application software first. After this has been done, the stored images in the camera can be moved to the PC and can be edited by an image editing program.
Disable other programs before installing the application software. Before installing the application software, disconnect the USB connection. You can visit the Samsung web-site through the internet. http://www.samsungcamera.com : English http://www.samsungcamera.co.kr : Korean 1. Click the [Install] menu in the Autorun frame. The camera driver is installed automatically.
[Click !] 2. Installation is complete. A window for which you can select application software will be displayed. Select the application program and click the [Install] button. Refer to page. 92 for more information about the application program. [Click !]
If you select [Exit] at step 2, the application program installation will be cancelled.
3. The [Digimax Viewer 2.0] installation window will be displayed as shown below. Click the [Next >] button.

[Click !]

If you select [Cancel] at step 3, a window for installing MGI PhotoSuite III SE will be displayed.
4. The Software License Agreement window will be displayed. If you agree to this, click [Yes], the window will then move to the next step. If you disagree, click [No] and the install program will be canceled.
[Click !] 5. Select a destination folder and click [Next >].
[Click !] 6. Select the Program folder and click [Next >].
7. Installation is completed. Click the [Finish] button and a window for installing MGI PhotoSuite III SE will be displayed.
[Click !] 8. The [MGI PhotoSuite III SE] installation window will be displayed as shown below. Click the [OK] button.
If you select [Cancel] at step 8, a window for restarting the computer will be displayed.

Removing the USB Driver for Windows 98SE
To remove the USB driver, refer to the process shown below. 1. Trace [Start Settings] and click [Control Panel]
2. Double-click [Add/Remove programs].
3. The [Add/Remove Programs Properties] window will open. Click [Digimax 360] and click the [Add/Remove] button.

[Click!]

4. A window will open. Select [Remove] and click [Next >] button. The camera driver will be removed.
5. Uninstalling is complete. Click the [Yes] button and the window will disappear.

Removable Disk

To use this camera as a Removable Disk, install (p.110) the USB Driver. 1. Before turning the camera power on, connect the camera to the PC with the USB cable. 2. Click [Removable Disk] under [My computer] or [Windows Explorer]. 3. Image files stored in the Removable Disk (DCIM 100SSCAM) can be transferred to the PC.
Important information whilst using the Removable Disk The [Removable Disk] indicator will not show when the camera power is off. We recommend that you should copy the images to the PC to view them. Opening images directly from the removable disk may be subject to unexpected disconnection. When uploading images from the PC to the camera, ensure that the uploaded file names are not the same as those already stored on the memory. When you upload a file that is not taken by this camera to the Removable Disk, the [FILE ERROR!] message will be displayed on the LCD monitor in the PLAY mode, and nothing is displayed in THUMBNAIL mode. The green lamp next to the viewfinder will blink, when a file is transferred (copy or deletion) between the PC and the camera. Do not remove the USB cable until the lamp stops blinking. To remove the USB cable in Windows 2000/ME/XP, use the [Unplug or Eject Hardware] icon on the task bar.
Removing the removable disk
Windows 98SE 1. Check whether the camera and PC are transferring a file. If the green lamp (next to the viewfinder) blinks, you have to wait until the LED illuminates. 2. Unplug the USB cable.
Windows 2000/ME/XP (The illustrations may be different from the real display in accordance with the Windows O/S.) 1. Check whether the camera and PC are transferring a file. If the green lamp (next to the viewfinder) blinks, you have to wait until the LED illuminates. 2. Double-click the [Unplug or Eject Hardware] icon on the task bar. [Double-click]
3. The [Unplug or Eject Hardware] window will open. Select the [USB Mass Storage Device] and click the [Stop] button.

4. The [Stop a Hardware device] window will open. Select the [SAMSUNG DIGIMAX 360 USB Device] and click the [OK] button. [Click!]
5. A [Safe to Remove Hardware] window will open. Click the [OK] button. [Click!]
6. A [Unplug or Eject Hardware] window will open. Click the [Close] button and the removable disk will be removed safely.

7. Unplug the USB cable.

Setting up the USB Driver for MAC
1. A USB Driver for MAC is not included with the Application CD as MAC OS supports the camera driver. 2. Check the MAC OS. You can check the MAC OS version during MAC OS start-up. This camera is compatible with MAC OS 9.0~10.2. 3. Connect the camera to the Macintosh and turn the camera power on in PC mode. 4. A new icon (Untitled) will be displayed on the desktop after connecting the camera to the MAC.
Using the USB Driver for MAC
1. Double click a new icon (Untitled) on the desktop and the folder in the memory will be displayed. 2. Select an image file and copy or move it to MAC.
If you use Mac OS 10.0 or later, you may experience an error occurring when you transfer files from the PC to the camera.

Digimax Viewer

This software is only compatible with Windows. 1. To open Digimax Viewer, click the [ Start Programs Samsung Digimax Viewer 2.0 Digimax Viewer 2.0 ] and Digimax Viewer 2.0 will then open.
2. If the [Auto Launch] option is selected, this program will be executed automatically upon recognizing the camera.
3. You can easily use the Digimax viewer program as it offers FILE menu and TOOL bar. And, you can use the pop up menu. Click an image and press the right mouse button.
Digimax Viewer functions are listed below. - Basic function : Copy, Move, Delete, Rotate, Rename, changing file type, Resize, Property. - Advanced function : Print, Slide show, Export, Sending e-mail, On-line print, Web album etc.
Refer to the [Help] menu in Digimax viewer 2.0 for further information.

MGI PhotoSuite III SE

This software is only compatible with Windows. To open MGI PhotoSuite lll SE, click the [Start Programs PhotoSuite lll SE] and MGI PhotoSuite lll SE will then open. MGI PhotoSuite lll SE MGI
An introduction to the Welcome screen

Get images.

Prepare
A number of photo editing activities can be performed within this module.

Compose

Use your photos in a variety of fun, creative and interesting ways.

Organize

Organize your photos and other media files into albums.
Save your results to show to others.
Print hard copies of photos and projects.
Introduction to navigation bar
Back Return to the previous step. Home Return to Welcome screen. Help Display help window. Get Get images. Prepare A number of photo editing activities can be performed within this module. Compose Use your photos in a variety of fun and interesting ways. Organize Organize your photos and other media files into albums. Share Save your results to show to others. Print Print hard copies of photos and projects. Browse Browse the web site.