PB7200 BenQ PB7220 PB7100 Users Manual

Copyright

Copyright 2003 by BENQ Corporation. All rights reserved. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system or translated into any language or computer language, in any form or by any means, electronic, mechanical, magnetic, optical, chemical, manual or otherwise, without the prior written permission of BENQ Corporation.

Disclaimer

BENQ Corporation makes no representations or warranties, either expressed or implied, with respect to the contents hereof and specifically disclaims any warranties, merchantability or fitness for any particular purpose. Furthermore, BENQ Corporation reserves the right to revise this publication and to make changes from time to time in the contents hereof without obligation of BENQ Corporation to notify any person of such revision or changes.

Fill this in!!

In case service is needed in the future, record the information described below. The serial number is on the back of the product. Projector Information Product Name: Serial Number: Date of Purchase: Dealer Information Dealer: Telephone Number: Address: PB7200/ PB7220/ PB7100
BenQ PB7200/ PB7220/ PB7100 Users Manual

Table of Contents

Introduction. 1
Safety Instructions.1 Shipping Contents.2 Alternative Accessories. 2 Optional Accessories. 2 Projector Description.3 Projector. 3 External Control Panel. 4 Adjuster. 5 Projector Features. 5 Remote Control Description.6 Remote Control Effective Range. 7 Installing or Replacing Batteries. 7

Installation. 8

Screen Size.8 Connecting to Various Equipment.9

Operation. 12

Start Up.12 Digital Keystone Correction.13 Auto Adjustment.13 Source Selection.14 Blank.14 Menu System.15 1. Display Menu. 16 2. Image Menu. 17 3. Source Menu. 18 4. Control Menu. 19 5. PIP Menu. 20 Shutdown.21

Maintenance. 22

Lamp Information.22 Use and Replacement of the Lamp. 22 Lamp Replacement. 22 Resetting Lamp Hours. 24 Temp Information.24 LED Indicator Status & Illustration.24 Table of Contents iii
BenQ PB7200/ PB7220/ PB7100 Manual
llustration. 24 Service Information. 26 Accessories (included in the standard package). 26 Alternative Accessories. 26 Optional Accessories (not included in the standard package). 26 Ordering Parts or Getting Information. 26

Troubleshooting. 27

Common Problems & Solutions. 27 Status Messages. 28

Specifications. 29

Projector Specifications. 29 Timing Chart. 30
Dimensions. 31 Warranty. 32

Limited Warranty. 32

Safety Regulations. 33
FCC Statement. 33 EEC Statement. 33

INTRODUCTION

Caution
TO PREVENT SHOCK, DO NOT OPEN THE CABINET. NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. PLEASE READ THIS USERS MANUAL BEFORE YOU OPERATE YOUR PROJECTOR. SAVE THIS USERS MANUAL FOR FUTURE REFERENCE.

Safety Instructions

1. 2. Read this users manual before you operate your projector and save it for future reference. The lamp becomes extremely hot during operation. Allow the projector to cool for approximately 45 minutes prior to removing the lamp assembly for replacement. Do not operate lamps beyond the rated lamp life. Excessive operation of lamps beyond the rated life could cause them to explode on rare occasions. Never replace the lamp assembly or any electronic components unless the projector is unplugged. To reduce the risk of electric shock, do not disassemble this appliance. Take it to a qualified technician when service or repair is required. Incorrect reassembly can cause electric shock when the appliance is subsequently used. Do not place this product on an unstable cart, stand, or table. The product may fall, sustaining serious damage. This product is capable of displaying inverted images for ceiling mount installation. Please use suitable equipment for mounting the unit and ensure it is securely installed.
Always open the lens shutter or remove the lens cap when the projector lamp is on. Do not look straight at the projector lens during operation. The intense light beam may damage your eyes. In some countries, the line voltage is NOT stable. This projector is designed to operate safely within a bandwidth of 110 to 230 volts, but could fail if power cuts or surges of more than10 volts occur. In these high-risk areas, it is recommended that a power stabilizer unit be used in conjuction with this projector. Introduction 1

Shipping Contents

The projector is shipped with the cables required for connection to standard PC or laptop computers. Carefully unpack and verify that you have all the items shown below. If any of these items are missing, please contact personnel at the place of purchase.

Projector

Users Manual
Quick Start Card Warranty Booklet
Users Manual CD HDTV Cable Remote Control

Batteries

Soft Carry Case

Audio Cables

S-Video Cable

VGA Cable

USB Cable

Video Cable

Alternative Accessories
For the US: Power Cord and 3-2 Converter For UK and EU countries: 220V and 240V Power Cords

3-2 Converter

Optional Accessories
1. 2. 3. 2 Macintosh adapter 250W lamp module Ceiling mount kit

Introduction

Projector Description
External control panel (see next page) Projection lens Front adjuster IR remote sensor Ventilation grill Speaker Projection lens adjuster RGB (PC/ Mac) signal input - 1 RGB (PC/ YPbPr/ YCbCr) signal input -2 Video connector
Audio jack USB mouse connector S-Video jack RS 232 control port AC power cord inlet Main power switch Rear adjuster feet Kensington lock slot Lamp door

External Control Panel

1 Power Presses the Power key to turn the projector on or off.

8 Blank

2 Source Selects signal sources from among RGB1, RGB-2, YPbPr, S-Video and Video.
Uses Blank to hide the screen image. You can unseal the image gradually by using the mouse of the remote control, or simply press Blank to turn on the image immediately.

9 Power indicator

4 Exit 5 Right 6 Menu Menu will display the menu system on screen. Press Menu again to access the sub-menus. Left and Right help you navigate among choices and settings in the menus and sub-menus. However, when the on-screen menu is not activated, the Left and Right buttons will function as Keystone -/+ hot keys. Press the Exit button to go back to the main menu. Press Exit again to leave the menu system.

3 Left

It will light up or flash when the projector is under operation. Temp indicator The Temp indicator will flash when the system temperature is too high, which may occur if the projector is operated improperly. See "Temp Information" on page 24 for more detailed information. Lamp indicator The Lamp Indicator will light up when the lamp needs service or replacement. See Lamp Information on page 22 for more detailed information.

7 Auto

Automatically determines the best picture settings for current received signals.

Adjuster

The projector is equipped with 1 quick-release adjuster foot. Push the button to adjust its tilt angle. 1. 2. Lift the projector up and press the adjuster button to release the adjuster. The adjuster will drop into position and be locked.

Projector Features

The projector integrates high-performance optical engine projection and a user-friendly design to deliver high reliability and ease of use. The projector offers the following features: Small and light for portability Full-function remote control with laser pointer/ remote mouse function High quality manual zoom lens One-key auto-adjustment to display the best picture quality Digital keystone correction to correct distorted images Adjustable color balance control for data/video display Ultra-high brightness projection lamp Ability to display 16.7 million colors On-screen menus in 8 languages: English, French, German, Italian, Spanish, Korean, Traditional Chinese and Simplified Chinese. Switchable Normal/ Economic mode to adjust the power consumption Powerful AV function to provide high quality AV picture HDTV compatibility (YPbPr) Note: The brightness of the projected image will vary depending on the ambient lighting conditions and contrast/brightness settings.
Remote Control Description
Power Menu 3 Left/ Keystone 4 Right/ Keystone + Auto L-Click/ R-click Zoom in/ out
By pressing ZOOM IN +, the center of the picture will be magnified. When the + button is pressed again, the picture is further magnified, up to four times the original size. By pressing ZOOM OUT -, the size of the image is reduced. When the button is pressed again, the picture is further reduced until it is restored to its original size. To return to the normal display mode, press the RETURN button. (This function can be used in combination with FREEZE. )
Laser Pointer Source Exit

Blank Mouse Pad

Drag Volume +/Mute PIP Source PIP Pos. PIP Size
By pressing the PIP-Source, PIP-Pos and PIP-Size hotkeys, you can enable the PIP (Picture In Picture) function and choose the position and size of the PIP image.

Return Ratio Freeze

The image is frozen when FREEZE is pressed. A Pause icon will appear in the lower right corner of the screen. To stop the freeze function, press the FREEZE button, RETURN button or SOURCE button (when the input source is switched over during display) again. By pressing the Ratio hotkey, you can select the screen aspect ratio you prefer: 4:3,16:9 or 1:1.

Remote Control Effective Range
The remote sensors are located on the front and the back of the projector. It can function in a range of 30 degrees horizontally and 30 degrees vertically relative to a line that is a right angle to the remote sensors. The distance between the remote control and the remote sensors must be shorter than 6 meters (19.5 feet).
Installing or Replacing Batteries
Push and open the battery compartment lid in the direction shown.
Install batteries as indicated by the diagram inside the compartment.
Position the lid over the compartment and snap it back into place.
Avoid excessive heat and humidity. There may be danger of an explosion if batteries are incorrectly replaced. Replace only with the same or equivalent type recommended by the manufacturer. Dispose of used batteries according to the manufacturers instructions.

INSTALLATION

Screen Size
Place the projector at the required distance from the screen according to the desired picture size (see the table below).
PB7200/ PB7220 (XGA) screen size chart
Diagonal measurement Minimum Maximum zoom zoom inches feet inches feet inches 48 2.49 29.9 3.05 36.3.73 44.8 4.57 54.4.98 59.7 6.10 73.6.22 74.7 7.62 91.7.47 89.6 9.14 109.8.71 104.5 10.67 128.9.96 119.5 12.19 146.11.20 134.4 13.72 164.12.45 149.4 15.24 182.13.69 164.3 16.76 201.14.94 179.2 18.29 219.16.18 194.2 19.81 237.17.42 209.1 21.34 256.18.67 224.0 22.86 274.19.91 239.0 24.38 292.6 Distance from screen meters 1 1.2.3.4.5.6.7.cm 800 Diagonal measurement Minimum Maximum zoom zoom meters cm meters cm 0.62 62.2 0.76 76.2 0.93 93.3 1.14 114.3 1.24 124.5 1.52 152.4 1.56 155.6 1.91 190.5 1.87 186.7 2.29 228.6 2.18 217.8 2.67 266.7 2.49 248.9 3.05 304.8 2.80 280.0 3.43 342.9 3.11 311.2 3.81 381.0 3.42 342.3 4.19 419.1 3.73 373.4 4.57 457.2 4.04 404.5 4.95 495.3 4.36 435.6 5.33 533.4 4.67 466.7 5.72 571.5 4.98 497.8 6.10 609.6
Distance from screen feet 32

Installation

PB7100 (SVGA) screen size chart
Diagonal measurement Minimum Maximum zoom zoom inches feet inches feet inches 48 1.96 23.5 2.40 28.2.93 35.2 3.59 43.3.91 47.0 4.79 57.4.89 58.7 5.99 71.5.87 70.4 7.19 86.6.85 82.2 8.39 100.7.83 93.9 9.58 115.8.80 105.7 10.78 129.9.78 117.4 11.98 143.10.76 129.1 13.18 158.11.74 140.9 14.37 172.12.72 152.6 15.57 186.13.70 164.3 16.77 201.14.67 176.1 17.97 215.15.65 187.8 19.17 230.0 Distance from screen meters 1 1.2.3.4.5.6.7.cm 800 Diagonal measurement Minimum Maximum zoom zoom meters cm meters cm 0.49 48.9 0.60 59.9 0.73 73.4 0.90 89.8 0.98 97.8 1.20 119.8 1.22 122.3 1.50 149.7 1.47 146.7 1.80 179.7 1.71 171.2 2.10 209.6 1.96 195.7 2.40 239.6 2.20 220.1 2.70 269.5 2.45 244.6 2.99 299.5 2.69 269.0 3.29 329.4 2.93 293.5 3.59 359.4 3.18 317.9 3.89 389.3 3.42 342.4 4.19 419.3 3.67 366.8 4.49 449.2 3.91 391.3 4.79 479.1

Connecting to Various Equipment

HDTV Equipment

The projector is capable of displaying various High Definition TV display modes. Some of these sources are: Digital-VHS (D-VHS) player Satellite Dish HDTV receiver DVD player DTV tuners
Most of these sources will provide an analog component video output, a standard VGA output, or a YPbPr (default) format. The projector is capable of accepting HDTV data through a YPbPr connector. Use a HDTV cable that came with your projector to display HDTV images. The following standards are supported in the HDTV function: 480i 720p 480p 1080i
Please refer to "Menu System" on page 15 for information on the HDTV OSD selections.
It only takes a few seconds to connect your projector to your desktop or notebook computer, VCR, or other systems. However, a Mac adapter (an optional accessory) is needed for connection to Macintosh computers. 1. Notebook/ Computer (Macintosh computer or SOG signal is only supported with RGB IN-1.)
The USB cable is not needed unless you have a remote control with mouse functions. 2. DVD player or HDTV can only support with RGB IN-2.

S-video device

BenQ PB7200/ PB7220/ PB7100 Users Manual 4. Video device or VCR

OPERATION

Start Up
1. Plug the power cord into the projector and into a wall socket.
Turn on the main power switch.
Press and hold POWER to start the unit. The back-lit POWER key flashes green and stays green when the power is turned on.

Projector Remote Control

(When the power is turned off, there is a 90-second cooling period before the projector can be re-started.) 4. Switch on all connected equipment.

Operation

Digital Keystone Correction
Keystoning refers to the situation where the projected image is noticeably wider at either the top or bottom. To correct this, press 3 Left/ Right 4 (hot key) on the control panel of the projector or KEYSTONE 3/4 on the remote control, and then adjust the sliding bar labeled Keystone, as needed. Press + to correct keystoning at the top of the image. Press - to correct keystoning at the bottom of the image.

Remote control

Auto Adjustment
In some cases, you may need to optimize the picture quality. To do this, press the AUTO key on the control panel of the projector or on the remote control. Within 3 seconds, the built-in Intelligent Auto Adjustment function will re-adjust settings to provide the best picture quality.

Projector Remote control

Source Selection
When several input sources are available, press the SOURCE key to make a selection from the control panel of the projector or the remote control.

Menu System

Press Menu for the main menu, and then press 3or Menu again to select items in the sub-menu.
4 to select a sub-menu. Press

Menu Bar

Sub-menu
Display Keystone Brightness Contrast Phase H Size
Image Auto Resize H Position V Position Color Temp Information Ratio Color Tint Color Temp
Source Mirror Source Scan Volume Mute
Control Language OSD Setup Economic Mode Reset Lamp Hour
PIP Main page: PIP Source PIP Size PIP Pos. H Position V Position More Options Sub Page: Brightness Contrast Color Tint Sharpness System

Y/Pb/Pr

S-Video
Keystone Brightness Contrast Color Tint
Ratio System Sharpness Color Temp Information

1. Display Menu

FUNCTION DESCRIPTION Corrects any keystoning of the image. Keystone
Adjusts the brightness of the image.

Brightness

Adjusts the degree of difference between dark and light in the image. Contrast
Adjusts to avoid the occurrence of flicker.
*This function is not available when the input mode is Video or SVideo.
Adjusts to fit in the desired image size. H Size Color Tint
Increases or decreases the color range (R, G, B) of the image.
*This function is not available when the input mode is PC.
Adjusts the image to make it appear more red or blue.

2. Image Menu

FUNCTION Auto Resize DESCRIPTION Makes the best fit of the image to the screen, 1. On 2. Off 3. 16:9

*This function is available only when the input mode is PC.
Users have 2 options for the image ratio. 1. 4 : 3 2. 16 : 9
*This function is available when the input mode is YPbPr, Video or SVideo.
Adjusts the horizontal position of the projected image.

H Position

Adjusts the vertical positon of the projected image.

V Position

Color Temp Information System Sharpness Color Tint
Adjusts the color temperature to fit your preference. Shows the current resolution. System information will be shown: 1.NTSC 2. PAL 3.SECAM 4. YUV Adjusts the image to make it look sharper or softer.
*This function is not available when the input mode is PC or YPbPr.
*This function is available only when the selected System is NTSC.

3. Source Menu

FUNCTION 1. Default DESCRIPTION 2. Ceiling mounted projection

Mirror

3. Rear screen projection
4. Ceiling mounted and rearscreen projection

Source Scan

Shows the input source from among RGB-1, RGB-2, YPbPr, S-Video and Video when several sources are available. Adjusts the volume level.

Volume On

Off Mute

4. Control Menu

FUNCTION DESCRIPTION Language sets the language for the OSD control menus. Use the 3 / 4 key to select the desired language from among English, French, German, Italian, Spanish, Korean, Traditional Chinese and Simplified Chinese. OSD Pos. Selects a desired OSD position. OSD Time Sets the length of time the OSD will remain active after the last time you pressed the button. The range is from 5 to 60 seconds in 5-second increments. Source Scan When selected, activates the Source scan function. Keystone Hold When selected, preserves the last keystone correction value even when the projector is restarted. Mirror Hold When selected, preserves the last mirror correction value even when the projector is restarted. Blank Time Determines the length of time before the projector is shut off when Blank is activated. Auto Off Sets the length of time before the system is shut off when no input is detected. User Logo Enables the user to define his/her own logo screen that will display during strat-up. Three modes are available: Default (BENQ logo), black screen and blue screen. Selects Economic mode to lower brightness and extend the lamp life. Returns all settings to their factory preset values. Shows lamp usage time.

Language

Economic Mode Reset Lamp Hour

5. PIP Menu

These functions are available only when the input mode is PC and the PIP source is Video or S-Video. FUNCTION PIP Source DESCRIPTION Selects the source for the PIP. Enables use of the 3 / 4 key to scroll through the four alternatives: Off, Small, Medium, Large.

PIP Size

PIP-Source

PIP-Pos

PIP-Size
Selects a desired position for the PIP.

PIP Position

H Position V Position More Options Brightness Contrast Color Tint Sharpness System
Adjusts the horizontal position of the PIP image. Adjusts the vertical position of the PIP image. Enables use of the 3 / 4 key to select more PIP functions including Brightness, Contrast, Color, Tint, Sharpness and System. Adjusts the brightness of the PIP image. Adjusts the degree of difference between dark and light for the PIP image. Increases or decreases the color range (R, G, B) of the image. Adjusts the image to make it appear more red or blue. Adjusts the image to make it appear sharper or softer Shows PIP image systems: NTSC, PAL, SECAM

Shutdown

1. Press and hold POWER and a warning message will appear. To turn off the projector, press and hold POWER again.

Remote Control

The fan will continue to run for approximately 90 seconds. Turn off the main power switch.
Disconnect the power cord from the wall socket.
Please do not unplug the power cord before POWER is shut down or during the 90-second cooling process. If the projector is not properly shut down, to protect the lamp, the system will detect this and cool the lamp for 90 seconds automatically before turning on again.

MAINTENANCE

Lamp Information
Use and Replacement of the Lamp
When the Lamp Indicator lights up red or a message appears suggesting the time of lamp replacement, please install a new lamp or consult your dealer. An old lamp could cause a malfunction in the projector and in rare instances may even break. For more detailed information, please refer to "LED Indicator Status & Illustration" on page 24.
The Lamp and Temp indicators will light up if the lamp becomes too hot. Turn off the power and let the projector cool for 45 minutes. If the Lamp or Temp indicator still lights up when turning the power on, please contact your dealer.

Lamp Replacement

To reduce the risk of electrical shock, always turn off the projector and disconnect the power cord before changing the lamp. To reduce the risk of severe burns, allow the projector to cool for at least 45 minutes before replacing the lamp. To reduce the risk of injuries to fingers and damage to internal components, use caution when removing lamp glass that has shattered into sharp pieces. To reduce the risk of injuries to fingers and/or compromising image quality by touching the lens, do not touch the empty lamp compartment when the lamp is removed. This lamp contains mercury. Consult your local hazardous waste regulations to dispose of this lamp in a proper manner.

Maintenance

BenQ PB7200/ PB7220/ PB7100 Users Manual Step 1. Turn off the projector. Disconnect the power cord from the outlet and the projector. Step 2. Loosen the screw and remove the lamp cover. If the lamp is hot, avoid burns by waiting 45 minutes until the lamp has cooled. Step 2
Step 3. Loosen the 3 screws. (It is strongly recommended that you use a magnetic-head screwdriver.) Pull the handle to remove the lamp housing. If the screws are not loosened completely, they could injure your fingers. Do not insert your hand into the box after the lamp is removed. If you touch the optical components inside, this could cause color unevenness in projected images. Step 4. Replace the lamp with a new one. Insert it into the projector, and tighten the screws firmly. Loose screws may cause a bad connection, which may result in malfunction.

Step 3

Step 4
Step 5. Re-install the lamp cover and tighten the screw. Do not turn on the power with the lamp cover removed. Whenever the lamp is replaced, reset the total lamp operation time. Do not reset if the lamp is not replaced as this could cause damage.

Step 5

Resetting Lamp Hours
If you replace the lamp after 2000 hours of operation, please follow the instructions below within 10 minutes of powering on.

FUNCTION

Press and hold the Exit button on the projector for 3 seconds to display the total used lamp time.
Press the MENU button on the projector during the lamp hour message. An adjustment message will appear. Press or to reset lamp hours or press EXIT to leave.

Temp Information

When the LED lights up, it is warning you of the following possible problems: 1. The internal temperature is too high. 2. The fans are not working. Turn off the projector and contact qualified service personnel for further help. For more detailed information, please refer to "LED Indicator Status & Illustration" on page 24.
LED Indicator Status & Illustration

Power cord (for the US).27.01818.000 3-2 converter(for the US). 22.91007.001 Power cord (for EU countries).27.82718.281 Power cord (for UK). 27.01018.000
Optional Accessories (not included in the standard package)
Description of parts. Part number Mac adapter (switchable).20.20118.A15 250W lamp module. 65.J4002.001 Ceiling mount kit. 60.J7615.001
Ordering Parts or Getting Information
For product information, product assistance, service information, or to order accessories, please visit the BENQ Corporation website at http://www.BenQ.com.

TROUBLESHOOTING

Common Problems & Solutions

NO POWER

Try these solutions: Make sure the power cord is inserted snuged into the AC adapter socket. Make sure the power cord is inserted snuged into the power outlet. Toggle the power switch to the position 1. Wait two minutes after the projector is turned off before turning the projector back on.

NO PICTURE

Try these solutions: Check for the proper input source. Ensure all cables are connected properly. Adjust the brightness and contrast. Remove the lens cap.
TRAPEZOID IMAGE ON THE SCREEN
Try these solutions: Reposition the unit to improve its angle on the screen. Use the Keystone correction key on the control panel of the projector or the remote control unit.

POOR COLOR

Try these solutions: Select the correct video system. Adjust brightness, contrast, or saturation.

BLURRED IMAGE

Try these solutions: Press Auto on the control panel of the projector or the remote control unit to get better picture quality. Adjust the focus. Reposition the unit to improve its projection angle. Ensure the distance between the unit and screen is within the adjustment range of the lens.

Troubleshooting

REMOTE CONTROL DOES NOT WORK
Try these solutions: Replace the batteries with new ones. Make sure there is no obstacle between the remote control and the projector. Stand within 6 meters (19.5 feet) of the projector. Make sure nothing is blocking the front and rear receivers.

Status Messages

On-Screen Messages
SEARCHING ACQUIRING SIGNAL OUT OF RANGE LAMP WARNING CHANGE LAMP AND RESET LAMP TIMER! OUT OF LAMP USAGE TIME. YOU HAVE TO CHANGE THE LAMP! OUT OF LAMP USAGE TIME. CHANGE THE LAMP!

Description

Projector is searching for input. Projector has identified the input signal and is running the auto image adjustment function. Input signal frequency exceeds the projectors range. The lamp has been in operation for 1900 hours. Install a new lamp for optimal performance.
The lamp has been in operation for 1980 hours, and the power will turn off after 20 hours.
The lamp has been in operation for over 2000 hours. The warning message will display for 30 seconds every 5 minutes after you turn on the projector and the power will turn off automatically after 10 minutes.

SPECIFICATIONS

Projector Specifications

Technical Specifications

Note: All specifications are subject to change without notice. General Product name Personal Projector Model name PB7200 1024X768 XGA PB7220 1024X768 XGA PB7100 800X600 SVGA Optical Display system 1-CHIP DMD Lens F/Number F/2.6 Lamp 250W UHP lamp

Electrical

Power supply Power consumption Mechanical Dimensions Operating temperature range Weight Input terminal Computer input RGB input - 1 RGB input - 2 Video signal input S-VIDEO VIDEO HDTV signal input Audio signal input Audio 1 AC100 ~ 240V, 4.0A, 50/60 Hz (Automatic) 330W (Max) 258 mm (W) x 80 mm (H) x 211.5 mm (D) 10C ~ 40C 5.6 lbs (2.5 Kg)
D-sub 15-pin (female) D-sub 15-pin (female) Mini DIN 4-pin port x1 RCA jack x1 D-sub <--> YPbPr RCA jack x3 Mini jack stero port A/B series xwatt x 1 9-pin x1

Output

USB mouse connector Speaker

Control

RS-232C

Specifications

Timing Chart

Resolution

640x350 640x400 720x400 720x400 640x480 640x480 640x480 640x480 800x600 800x600 800x600 800x600 800x600 832x624 1024x768 1024x768 1024x768 1024x768 1280x1024

H Sync (kHz)

31.5 37.9 31.5 37.9 31.5 37.43.3 35.2 37.9 46.9 48.1 53.7 49.7 48.4 56.5 60.0 68.7 64.0

V Sync (Hz)

70.1 85.1 70.0 85.1 60.0 72.8 66.7 85.0 56.3 60.3 75.0 72.2 85.1 74.5 60.0 70.1 75.0 85.0 60.0

Remark

VESA VESA VESA VESA Macintosh VESA VESA VESA VESA VESA VESA Macintosh VESA VESA VESA VESA VESA

DIMENSIONS

Unit: mm

Dimensions

WARRANTY

Limited Warranty

BENQ warrants this product against any defects in material and workmanship, under normal usage and storage. Exclusion to Warranty: The lamps are considered a consumable item and are warranted for 90 days or 500 hours, whichever occurs first. Proof of purchase date will be required with any warranty claim. In the event this product is found to be defective within the warranty period, BENQs only obligation and your exclusive remedy shall be replacement of any defective parts (labor included). To obtain warranty service, immediately notify the dealer from which you purchased the product of any defects. Important: The above warranty shall be void if the customer fails to operate the product in accordance with BENQs written instructions. This warranty gives you specific legal rights, and you may have other rights which vary from country to country. For other information, please refer to BenQ Warranty Information Book.

Warranty

SAFETY REGULATIONS

FCC Statement

CLASS A: This equipment generates, uses and can radiate radio frequency energy, and if not installed and used in accordance with the instruction manual, may cause interference to radio communications. It has been tested and found to comply with the limits for a Class A computing device pursuant to Subpart B of Part 15 of the FCC Rules, which are designed to provide reasonable protection against such interference when operated in a commercial environment. Operation of this equipment in a residential area is likely to cause interference, in which case the user at his/her own expense will be required to take whatever measures may be required to correct the interference. CLASS B: This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the distance between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help.

EEC Statement

This machine was tested against the 89/336/EEC (European Economic Community) for EMC (Electro Magnetic Compatibility) and fulfills these requirements.

Safety Regulations

Apo New York New York 09046 NY http://www.centralmasshomewarranty.com Indoor Furnishings Manuals BenQ Indoor Furnishings Manuals Bathroom Lighting, Bedroom Lighting, Ceiling Lighting Fixture, Ceiling Lighting, Ceiling Lights BenQ Indoor Furnishings Manuals
BenQ PB7220-MOU Indoor Furnishings PB7220-MOU BenQ Indoor Furnishings Manuals
http://www.centralmasshomewarranty.com
Problems with your home can happen when you least expect. The last thing a home owner may have is time, patience or savings for an unexpected, costly repair. A Central Mass Home Warranty can help cover replacement or repairs of electrical, plumbing, HVAC systems and appliances.
Indoor Furnishings Manuals Bathroom Lighting, Bedroom Lighting, Ceiling Lighting Fixture, Ceiling Lighting, Ceiling Lights BenQ PB7220-MOU Indoor Furnishings PB7220-MOU BenQ Indoor Furnishings Manuals