\\Miyoshi-win\data1 (k)\+++NouhinMiyoshi+++\DPF-D830_IM\JP.GB\0826M_4262215112DPFD830U2\010COV.fm Master: Right 010COV.book Page 1 Thursday, August 26, 2010 3:11 PM

4-262-215-11 (2)

For your safety

Digital Photo Frame

DPF-D830/D830L
Lets get the photo frame ready Lets view an image
Try using various functions

Troubleshooting

Additional information

Operating Instructions

Before operating this unit, please read this manual thoroughly and retain it for future reference.

Owners Record

The model and serial numbers are located at the rear. Record the serial number in the space provided below. Refer to these numbers whenever you call upon your Sony dealer regarding this product. Model No. DPF-D830/D830L Serial No. ________________________ Product lineup differs by country and region.

2010 Sony Corporation

DPF-D830/D830L 4-262-215-11 (2)
\\Miyoshi-win\data1 (k)\@ALAYA\DPF-D830\IM\-11_GB\0817M_4262215111DPFD830U2_GB\020REG.fm Master: Left 010COV.book Page 2 Tuesday, August 17, 2010 2:37 PM

WARNING

To reduce fire or shock hazard, do not expose the unit to rain or moisture.

CAUTION

Replace the battery with the specified type only. Otherwise, fire or injury may result. Dispose of used batteries according to the instructions.
For the customers in the U.S.A.
You are cautioned that any changes or modifications not expressly approved in this manual could void your authority to operate this equipment. If you have any questions about this product, you may call: Sony Customer Information Services Center 1-800-222-SONY (7669) The number below is for the FCC related matters only.
Regulatory Information Declaration of Conformity
Trade Name: Model No.: Responsible Party: Address: SONY DPF-D830 Sony Electronics Inc. 16530 Via Esprillo, San Diego, CA 92127 U.S.A. Telephone No.: 858-942-2230 This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
If the shape of the plug does not fit the power outlet, use an attachment plug adaptor of the proper configuration for the power outlet.
Do not expose the batteries to excessive heat such as sunshine, fire or the like.
DPF-D830/D830L 4-262-215-11 (1)
\\Miyoshi-win\data1 (k)\@ALAYA\DPF-D830\IM\-11_GB\0817M_4262215111DPFD830U2_GB\020REG.fm Master: Right 010COV.book Page 3 Tuesday, August 17, 2010 2:37 PM
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help.

For the State of California, USA only
Perchlorate Material - special handling may apply, See www.dtsc.ca.gov/hazardouswaste/perchlorate Perchlorate Material: Lithium battery contains perchlorate.
For the Customer in Europe
This product has been tested and found compliant with the limits set out in the EMC Directive for using connection cables shorter than 3 meters (9.8 feet).

Attention

The electromagnetic fields at the specific frequencies may influence the picture of this digital photo frame.

Notice

If static electricity or electromagnetism causes data transfer to discontinue midway (fail), restart the application or disconnect and connect the communication cable (USB, etc) again.
Disposal of Old Electrical & Electronic Equipment (Applicable in the European Union and other European countries with separate collection systems)
This symbol on the product or on its packaging indicates that this product shall not be treated as household waste. Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. The recycling of materials will help to conserve natural resources. For more detailed information about recycling of this product, please contact your local Civic Office, your household waste disposal service or the shop where you purchased the product.
Disposal of waste batteries (applicable in the European Union and other European countries with separate collection systems)
This symbol on the battery or on the packaging indicates that the battery provided with this product shall not be treated as household waste. On certain batteries this symbol might be used in combination with a chemical symbol.
\\Miyoshi-win\data1 (k)\@ALAYA\DPF-D830\IM\-11_GB\0817M_4262215111DPFD830U2_GB\020REG.fm Master: Left 010COV.book Page 4 Tuesday, August 17, 2010 2:37 PM
The chemical symbols for mercury (Hg) or lead (Pb) are added if the battery contains more than 0.0005% mercury or 0.004% lead. By ensuring these batteries are disposed of correctly, you will help prevent potentially negative consequences for the environment and human health which could otherwise be caused by inappropriate waste handling of the battery. The recycling of the materials will help to conserve natural resources. In case of products that for safety, performance or data integrity reasons require a permanent connection with an incorporated battery, this battery should be replaced by qualified service staff only. To ensure that the battery will be treated properly, hand over the product at end-of-life to the applicable collection point for the recycling of electrical and electronic equipment. For all other batteries, please view the section on how to remove the battery from the product safely. Hand the battery over to the applicable collection point for the recycling of waste batteries. For more detailed information about recycling of this product or battery, please contact your local Civic Office, your household waste disposal service or the shop where you purchased the product.

Various functions...22 Sorting images (Filtering)...23 Specifying the playback device...24 Adjusting image size and orientation (Zoom in/Zoom out/Rotate).24 Changing the settings of the auto power on/off function..GB
\\Miyoshi-win\data1 (k)\@ALAYA\DPF-D830\IM\-11_GB\0817M_4262215111DPFD830U2_GB\010TOC.fm Master: Right 010COV.book Page 7 Tuesday, August 17, 2010 2:37 PM
Changing the settings... 27 Displaying an image stored in a USB memory device. 28 Connecting to a computer... 29
If an error message appears... 30 If trouble occurs... 31
Precautions.... 34 Installation.... 34 Cleaning.... 34 Restrictions on duplication... 34 Disposing of the photo frame.... 34 Specifications.... 35 On trademarks and copyrights... 36
\\Miyoshi-win\data1 (k)\@ALAYA\DPF-D830\IM\-11_GB\0817M_4262215111DPFD830U2_GB\030C01.fm Master: Left.L0 010COV.book Page 8 Tuesday, August 17, 2010 2:37 PM
For your safety For your safety For your safety

Checking included items

Make sure that the following items are included. Digital photo frame (1)

Remote control (1)

Removing the protective sheet (page 11)
AC adaptor (1) Connecting to the AC power source (page 13)
Stand cap (1) Jacket cover* (1) (DPF-D830L only) Operating Instructions (this manual) (1) CD-ROM (Digital Photo Frame Handbook) (1) Warranty (1) (In some regions, the warranty is not supplied.) The supplied CD-ROM contains the Digital Photo Frame Handbook that explains operations and setups of the digital photo frame in detail. To view the handbook, insert the CD-ROM into the computer and double-click the Handbook icon. (To display the handbook, you need Adobe Acrobat Reader. )
For details on how to attach the jacket cover to the photo frame, refer to the supplied leaflet Attaching the jacket cover.
\\Miyoshi-win\data1 (k)\@ALAYA\DPF-D830\IM\-11_GB\0817M_4262215111DPFD830U2_GB\030C01.fm Master: Right 010COV.book Page 9 Tuesday, August 17, 2010 2:37 PM

Identifying the parts

x Digital photo frame

LCD screen

Remote sensor Sony logo
VIEW MODE button (page 17) RESET switch MENU button B/b/v/V (Direction)/ (Enter) buttons BACK button 1 (on/standby) button/Standby Indicator Access lamp Memory card slot (page 16) EXT INTERFACE (USB A) connector USB mini B connector (page 29) I/O cover Speaker DC IN 12 V jack Stand

Continued

\\Miyoshi-win\data1 (k)\@ALAYA\DPF-D830\IM\-11_GB\0817M_4262215111DPFD830U2_GB\030C01.fm Master: Left 010COV.book Page 10 Tuesday, August 17, 2010 2:37 PM

x Remote control

VIEW MODE buttons 1 (on/standby) button SLIDE-SHOW ( CLOCK ( ) button SINGLE button ) button INDEX ( ) button

MENU button

Zoom in ( ) button Direction (B/b/v/V) buttons BACK button MARKING ( ) button IMPORT ( SORT button SELECT DEVICE button DELETE ( ROTATE ( ) button ) button ) button ENTER ( ) button

Zoom out ( ) button

About descriptions in this manual The operations described in this manual are based on those with the buttons on the photo frame. When an operation is performed differently, for example, with the remote control and the buttons on the photo frame, it will be explained in a tip.
\\Miyoshi-win\data1 (k)\+++NouhinMiyoshi+++\DPF-D830_IM\JP.GB\0826M_4262215112DPFD830U2\040C02.fm Master: Right.L0 010COV.book Page 11 Thursday, August 26, 2010 3:11 PM

Remote control

Pull out the protective sheet before use as shown in the figure.

P Notes

If the remote control stops working: Replace the battery (CR2025 lithium battery) with a new one. When the lithium battery becomes weak, the operating distance of the remote control may shorten, or the remote control may not function properly. In this case, replace the battery with a Sony CR2025 lithium battery. Use of another battery may present a risk of fire or explosion.

Protective sheet

Replacing procedures:
Using the remote control Point the top end of the remote control towards the remote sensor on the photo frame.

CD-ROM (Handbook) page 9

P WARNING
Battery may explode if mistreated. Do not recharge, disassemble or dispose of in fire.
Push on the v mark on the stand in the direction of arrow A and slide the stand in the direction of arrow B until it stops, as illustrated below.
The 1 (standby) button on the remote control cannot be used when the photo frame is powered only by the built-in battery pack. Use the 1 (standby) button on the photo frame.
If you extend the stand in step 1 without sliding it to the limit in the direction of arrow B, the stand may be damaged. Be sure that the stand is set in a stable position when you place the photo frame. It may fall unless the stand is extended to the limit.
Extend the stand by holding the lower part of the stand then place it on a flat surface.

You can adjust the angle of the stand.
\\Miyoshi-win\data1 (k)\@ALAYA\DPF-D830\IM\-11_GB\0817M_4262215111DPFD830U2_GB\040C02.fm Master: Left 010COV.book Page 12 Tuesday, August 17, 2010 2:37 PM
x When the photo frame is placed in the portrait orientation
The display is automatically rotated on the portrait orientation. A video file is not rotated automatically even if you change the orientation of the photo frame.
You can set the photo frame to portrait or landscape orientation by rotating it without moving the stand.

x Sony logo

When the photo frame is placed in the portrait orientation or when you turn off the power, the Sony logo doesn't light up.

To attach the stand cap

Attach the stand cap to the stand. You can set the photo frame in a stable position either in portrait or landscape orientation if you extend the stand to the limit.

Stand cap

Cutout
When using the AC adaptor, pass the DC cord through the cutout of the stand. Detach the stand cap from the stand before folding the stand into the rear of the photo frame.
\\Miyoshi-win\data1 (k)\+++NouhinMiyoshi+++\DPF-D830_IM\JP.GB\4262215112DPFD830U2\040C02.fm Master: Right 040C02.fm Page 13 Friday, August 27, 2010 11:19 AM
Turning the photo frame on
Insert the plug of the AC adaptor into the DC IN 12 V jack on the rear of the photo frame. Connect the AC adaptor to the wall outlet.
The photo frame is automatically turned on.

PNotes

The socket outlet should be as close as possible to the unit, and easily accessible. Do not place the photo frame on an unsteady or tilted surface. Connect the AC adaptor to an easily accessible wall outlet close by. If trouble occurs while using the adaptor, immediately shut off the power by disconnecting the plug from the wall outlet. Do not short the plug of the AC adaptor with a metal object. Doing so may cause a malfunction. Do not use the AC adaptor placed in a narrow space, such as between a wall and furniture. After use, remove the AC adaptor from the DC IN 12 V jack on the photo frame, and remove the AC adaptor from the wall outlet. Do not turn the photo frame off or disconnect the AC adaptor from the photo frame while accessing an image. Doing so may damage the photo frame. The supplied AC adaptor is designed to be used with this photo frame only. It cannot be used with any other devices. The AC plug shape may differ depending on the region you purchase the photo frame.
To the DC IN 12 V jack Plug
AC adaptor To wall outlet

DC cable

When using the photo frame with the built-in battery pack
Turn on the photo frame with the 1 (standby) button on the photo frame. If the photo frame is powered only by the built-in battery pack, the 1 (standby) button on the remote control does not operate.

The remaining battery level is indicated. If the battery indicator is not displayed on the screen, press MENU. It will be displayed on the upper right of the menu screen.
\\Miyoshi-win\data1 (k)\@ALAYA\DPF-D830\IM\-11_GB\0817M_4262215111DPFD830U2_GB\050C03.fm Master: Right 010COV.book Page 19 Tuesday, August 17, 2010 2:37 PM

Playing a video file

Select a video file.
1 Press SINGLE. 2 Press B/b to select the desired style and press ENTER. 3 Press B/b to advance/reverse the files to select a video file
You cannot play the following type of video file: Video files processed with other video codec than Motion JPEG Video files that exceed maximum number of pixels either in width or height (We cannot guarantee operation with video files not mentioned above.) Fast forward/backward playback and playback pause are not available during Slideshow display.
you want to play. Using the Index display 1 Press (INDEX). 2 Press B/b/v/V to select a video file you want to play.

Press ENTER.

The selected video file starts playback.

To adjust the volume

Press v/V during playback or playback pause of the video file.

To pause playback

Press ENTER during playback of the video file. To resume playback, press ENTER again.
Fast forward/backward playback
Press B/b during playback of the video file. The file is played forward or backward at high speed while you hold down the b or B button. When you release the button, normal playback starts from that point. Depending on the video file, fast forward/backward playback may not be available with the photo frame.

To stop playback

Press BACK while the video file is being played.
\\Miyoshi-win\data1 (k)\@ALAYA\DPF-D830\IM\-11_GB\0817M_4262215111DPFD830U2_GB\050C03.fm Master: Left 010COV.book Page 20 Tuesday, August 17, 2010 2:37 PM

z Tips

To clear the selection, select the file to be cleared then press ENTER. The check mark () next to the selected file disappears. To delete a music file imported to internal memory, select [Delete BGM] on the [Slideshow Settings] screen in step 2 then press ENTER. Press v/V to select the music file you want to delete from the music file list and press ENTER. A check mark will be displayed next to the selected file. Press MENU then press ENTER when the confirmation screen appears. The file will be deleted from the music file list.

Playing a slideshow with background music

Importing a music file

Insert a memory card or connect a USB external device that contains a music file into the photo frame. Press MENU, select the (Settings) tab with B/b, then press v/V to select [Slideshow BGM Settings]. Press v/V to select [Import BGM] and press ENTER. Press v/V to select the memory card inserted or the USB external device connected in step 1. Select a music file you want to import from the music file list with v/V and press ENTER.
A check mark () is displayed next to the selected file.
Playback of the imported music file is enabled only as BGM on a slideshow. Only music files imported to internal memory can be played as BGM. Up to 40 music files can be imported to internal memory of the photo frame. Up to 200 music files in the inserted memory card can be displayed. A music file shows only the file name. A music title and artists name cannot be shown.
Repeat step 5 when you want to select two or more files. Press MENU after you finish selecting the music file(s). Press ENTER when the confirmation screen is displayed.
The selected music file is imported to internal memory of the photo frame.
Selecting a music file to play
Press MENU, select the (Settings) tab with B/b, then press v/V to select [Slideshow BGM Settings]. Press v/V to select [Select BGM] and press ENTER. Select a music file you want to play from the imported music file list with v/V and press ENTER.
Repeat step 3 if you want to select two or more music files.
\\Miyoshi-win\data1 (k)\@ALAYA\DPF-D830\IM\-11_GB\0817M_4262215111DPFD830U2_GB\050C03.fm Master: Right 010COV.book Page 21 Tuesday, August 17, 2010 2:37 PM
When you select (Slideshow) on the view mode screen, the music file with a check mark () is played.
Playing background music with a slideshow
Fast forward/backward playback of background music is not available. Also, you cannot change the playback order of background music files. Background music cannot be played during playback of the video. The sound of the video file is played with the video. The background music for the photo displayed after playback of the video will start playback from the beginning of the next music file. If a music file to play is not selected from the imported music file list even if [BGM ON/OFF] is set to [ON], background music will not be played.

Press MENU, select the (Settings) tab with B/b, then press v/V to select [Slideshow BGM Settings]. Press v/V to select [BGM ON/OFF] and press ENTER.
[ON]: Background music is played while a slideshow is run. [OFF]: Background music is not played while a slideshow is run.
To adjust the volume The volume adjustment screen appears on the right of the screen if you press v/V. To increase the volume, press V. To decrease the volume, press v.
You can adjust the volume on the initial display or single image display.
\\Miyoshi-win\data1 (k)\@ALAYA\DPF-D830\IM\-11_GB\0817M_4262215111DPFD830U2_GB\060C04.fm Master: Left.L0 010COV.book Page 22 Tuesday, August 17, 2010 2:37 PM

z Tips x Importing

The number of images to be saved in the internal memory: Resize: approx. 4,000 images Original: the number of images may vary, depending on the original image file size.

Various functions

Importing an image (to Internal memory) Exporting an image (from Internal memory) Deleting an image Marking an image When a desired image is displayed, press MENU then B/b to select the (Editing) tab. Press v/V to select the desired menu item (Import/ Export/Delete/Marking), and press ENTER. Press v/V to select [. this image], [. multiple images] or [. all images], and press ENTER.
( stands for each command: Import, Export, Delete, or Mark.) [. this image]: Press v/V to select the destination, and press ENTER. [. multiple images]: Press B/b/v/V to select a desired image in the image list, and press ENTER to add. Repeat this operation to select multiple images.

PNotes x Exporting

Any memory card or USB external device that is not recognized by this photo frame is listed in gray and cannot be selected.

x Importing

Importing video files to internal memory using the buttons on the photo frame is not available. To import a video file, connect a computer to the photo frame and copy a video file on the computer to internal memory on the photo frame. For details, see Connecting to a computer (page 29).
x During exporting/deleting
Avoid doing the following. Doing so may damage this photo frame, memory card, USB external device, or the data: Turning off the power Removing a memory card Removing an USB external device Inserting another card

x When deleting

If deletion has started, the deleted image cannot be recovered even if you stop deletion.
To clear the selection: Select the image and press ENTER. disappears from the image. After you finish selecting the images, press MENU and select the destination. [. all images]: All the images are displayed with. Press MENU and select the destination.
Press ENTER when the confirmation screen is displayed.
\\Miyoshi-win\data1 (k)\@ALAYA\DPF-D830\IM\-11_GB\0817M_4262215111DPFD830U2_GB\060C04.fm Master: Right 010COV.book Page 23 Tuesday, August 17, 2010 2:37 PM
Sorting images (Filtering)

Using the remote control To enlarge an image, press (zoom in) on the remote control in Single view mode. To reduce an enlarged image, press (zoom out). Saving an enlarged or a reduced image (Crop and save) When you move the enlarged image with B/b/v/V and press MENU, the image is saved in the trimmed size. You can select the saving method by pressing v/V. Saving methods: [Save as new image], [Overwrite]* * JPEG file (extension:.jpg) only
\\Miyoshi-win\data1 (k)\@ALAYA\DPF-D830\IM\-11_GB\0817M_4262215111DPFD830U2_GB\060C04.fm Master: Right 010COV.book Page 25 Tuesday, August 17, 2010 2:37 PM

Rotating

Press MENU in Single view mode, B/b to select the (Editing) tab, v/V to select [Rotate], and press ENTER.
When displaying the images in the internal memory, the information used to rotate the image is retained even after the power is turned off.
An enlarged image cannot be rotated. You cannot rotate a video file.
Press v/V to select the angle of rotation and press ENTER.
You can select an angle of rotation from among 90 degrees, 180 degrees and 270 degrees clockwise.
Using the remote control You can also rotate an image with (ROTATE) on the remote control. The image rotates 90 degrees counterclockwise every time you press the button.
Changing the settings of the auto power on/off function
You can use the timer function to turn the photo frame on or off automatically when the photo frame is turned on.
z Tips x During operation
The power is turned off automatically at the time you set for [Power-OFF timer].
Press MENU, B/b to select the
Press v/V to select [Auto Power ON/OFF] and press ENTER.
x During the standby mode
The power is turned on automatically at the time you set for [Power-ON timer].
\\Miyoshi-win\data1 (k)\@ALAYA\DPF-D830\IM\-11_GB\0817M_4262215111DPFD830U2_GB\060C04.fm Master: Left 010COV.book Page 26 Tuesday, August 17, 2010 2:37 PM
Press v/V to select [Setup method], and press ENTER. Then, press v/V to select [Simple], [Advanced] or [Auto off] and press ENTER.

[Simple]

1 Press v/V to select [Time Setting] , ENTER. 2 Press v/V to select [Power-ON timer] or [Power-OFF timer]

, ENTER.

3 Press v/V to select [Enable] , ENTER. 4 [Auto ON time]/ [Auto OFF time] setting

v/V: Set the time.

AM or PM is displayed when you select [12 hours] on the time display setting. 5 [Auto ON day] / [Auto OFF day] setting v/V: Add a check mark to select the day on which you want to activate the timer. Move the cursor to [OK], and press ENTER. [Advanced]
1 Press v/V to select [Time Setting] , ENTER. 2 Press B/b/v/V to select the day of the week or a time zone*

for which you want to set or cancel the auto power on/off setting, then press ENTER to change the color of the time zone. * You can set a time zone by one hour units. Blue time zone: Power ON status Gray time zone: Power OFF status 3 Press B/b/v/V to select [OK].
\\Miyoshi-win\data1 (k)\@ALAYA\DPF-D830\IM\-11_GB\0817M_4262215111DPFD830U2_GB\060C04.fm Master: Right 010COV.book Page 27 Tuesday, August 17, 2010 2:37 PM

[Auto off]

1 Press v/V to select [Time setting] , ENTER. 2 Press v/V to select the desired period after which you want
to turn off the photo frame automatically: [2 hours], [4 hours], or [Disable]. Then press ENTER.

Changing the settings

Press MENU, then B/b to select the
Press v/V to select the item and setting value, then press ENTER.
Depending on the status on the photo frame, some settings of some items cannot be changed. They are displayed in gray and cannot be selected. During Clock and Calendar display, you can make settings in the (Settings) tab only.
Setting items Slideshow Settings Slideshow BGM Settings Auto Power ON/OFF Date/time Settings General Settings (Listing Order, Sony logo ON/OFF etc,.) Language Setting Initialize
\\Miyoshi-win\data1 (k)\@ALAYA\DPF-D830\IM\-11_GB\0817M_4262215111DPFD830U2_GB\060C04.fm Master: Left 010COV.book Page 28 Tuesday, August 17, 2010 2:37 PM
The playback device will be switched to the USB external device if you connect the USB memory to the USB A connector during playback of the image in the internal memory. Do not disconnect the USB memory, or turn off the photo frame while the access lamp on the photo frame is flashing. Doing so may damage the data stored in the USB memory. Sony assumes no responsibility for any damage or loss of data. The photo frame cannot use USB memory data that has been encrypted or compressed using, for instance, fingerprint authentication or a password. Do not connect a computer to the USB mini B connector on the photo frame simultaneously when a USB memory is connected to the EXT INTERFACE (USB A) connector. The photo frame may not be able to access files normally from a USB hub or USB device with a built-in USB hub may not operate properly. The I/O cover cannot be closed with a USB memory device inserted.

Displaying an image stored in a USB memory device
Connect the AC adaptor to the photo frame, and to the AC power source. Turn on the photo frame. Open the I/O cover. Connect the USB memory device to the EXT INTERFACE (USB A) connector on the photo frame.

USB memory

Select the [USB] External Device in Select device (page 24).
For details on the slideshow, see page 17. For details on adding images to the internal memory, see page 22.
\\Miyoshi-win\data1 (k)\@ALAYA\DPF-D830\IM\-11_GB\0817M_4262215111DPFD830U2_GB\060C04.fm Master: Right 010COV.book Page 29 Tuesday, August 17, 2010 2:37 PM

Connecting to a computer

Connect the AC adaptor to the photo frame, and to the AC power source. Open the I/O cover. Connect the computer and photo frame with a commercially available USB cable. Turn the photo frame on. Operate the computer to exchange images with the internal memory of the photo frame.
Use a mini B-Type USB cable.* * When you use a commercially available USB cable, use a USB cable with a mini B-type plug (for the USB mini B connector of this unit, frameside connector type) shorter than 3 meters. If multiple USB devices are connected to a computer or if a hub is used, a problem may occur. In such a case, simplify the connection. You cannot operate the photo frame from another USB device being used simultaneously. Do not disconnect the USB cable during data communication. Operation with all computers that satisfy the recommended system requirements is not guaranteed. The photo frame has been demonstrated as operable when connected to a computer. When other devices are connected to the photo frame, these devices may not recognize the internal memory of photo frame. Do not connect a computer to the USB mini B connector on the photo frame simultaneously when a USB memory is connected to the EXT INTERFACE (USB A) connector. The I/O cover cannot be closed with the USB cable connected.

To USB mini B connector

Computer

To USB connector

System Requirements x Windows
Recommended OS: Microsoft Windows 7/Windows Vista SP2 / Windows XP SP3 Port: USB port

x Macintosh

Recommended OS: Mac OS X (v10.4 or later) Port: USB port
\\Miyoshi-win\data1 (k)\+++NouhinMiyoshi+++\DPF-D830_IM\JP.GB\0826M_4262215112DPFD830U2\070C05.fm Master: Right 010COV.book Page 30 Thursday, August 26, 2010 3:11 PM
If an error message appears
Error message Cannot delete a protected file. Meaning/Solutions To delete a protected file, cancel the protection on your digital camera or computer.
Memory card is protected. Remove The memory card is write-protected. Slide the writeprotection then try again. protect switch to the enable position. (Digital Photo Frame Handbook, page 51) For a memory card: An error has occurred. Check that the memory card is inserted correctly. If this error message is displayed frequently, check the status of the memory card with a device other than the photo frame. Write error on the Memory Stick. / For an external device: Write error on the SD Memory The external device may be write-protected. Cancel the Card. /Write error in the External write-protection setting for the device you are using. Device. /Write error on the internal For the internal memory: memory. Initialize the internal memory. Error reading the Memory Stick. / Error reading the SD Memory Card. /Error reading the External Device. /Error reading the iternal memory.

\\Miyoshi-win\data1 (k)\@ALAYA\DPF-D830\IM\-11_GB\0817M_4262215111DPFD830U2_GB\070C05.fm Master: Right 010COV.book Page 33 Tuesday, August 17, 2010 2:37 PM
Symptom Cannot charge the built-in battery pack.
Check item Is the standby indicator lit?
Cause/Solutions c If an internal temperature of the photo frame rises owing to direct sunlight, etc., battery charging becomes disabled. In such a case, the standby indicator does not light, but this is not a malfunction of the photo frame.
\\Miyoshi-win\data1 (k)\@ALAYA\DPF-D830\IM\-11_GB\0817M_4262215111DPFD830U2_GB\080ADD.fm Master: Left.L0 010COV.book Page 34 Tuesday, August 17, 2010 2:37 PM

Precautions

Installation
Avoid placing the photo frame in a location subject to: vibration humidity excessive dust direct sunlight extremely high or low temperatures Do not use electrical equipment near the photo frame. The photo frame will not work properly in electromagnetic fields. Do not place heavy objects on the photo frame.

On transport

When you transport the photo frame, remove the memory card, external devices, AC adaptor, and connected cables from the photo frame and put the photo frame and its peripherals in the original box with the protective packaging. If you no longer have the original box and packing parts, use similar packing material so that the photo frame will not be damaged while being transported.

Cleaning

Clean the photo frame with a soft dry cloth. Do not use any type of solvent, such as alcohol or benzine, which may damage the finish.

On the AC adaptor

The set is not disconnected from the AC power source (mains) as long as it is connected to the wall outlet, even if the set itself has been turned off. Be sure to use the AC adaptor supplied with the photo frame. Do not use other AC adaptors, as this may cause a malfunction. Do not use the supplied AC adaptor for other devices. Do not use an electrical transformer (travel converter), as this may cause overheating or a malfunction. In case the cord of the AC adaptor is damaged, do not use it any longer, as this may be dangerous.
Restrictions on duplication
TV programs, films, video tapes, portraits of other people, or other materials may be copyrighted. Unauthorized use of such materials may infringe the provisions of the copyright law.
Disposing of the photo frame
Even if you perform [Format internal memory], the data in the internal memory may not be erased completely. When you dispose of the photo frame, consult with your Sony dealer or Sony service facilities.

On moisture condensation

If the photo frame is brought directly from a cold location to a warm location or placed in an extremely warm or humid room, moisture may condense inside the unit. In such cases the photo frame will probably not work properly and may even develop a fault if you persist in using it. If moisture condensation occurs, unplug the AC adaptor of the photo frame and do not use the photo frame for at least one hour.

\\Miyoshi-win\data1 (k)\@ALAYA\DPF-D830\IM\-11_GB\0817M_4262215111DPFD830U2_GB\080ADD.fm Master: Right 010COV.book Page 35 Tuesday, August 17, 2010 2:37 PM

Specifications

x Photo frame
LCD screen LCD panel 20.3 cm/8 inches, TFT active matrix Total number of dots: 1,440,000 dots ((RGB) 600) dots Effective display area Display aspect ratio 4:3 LCD screen area: 20.0 cm / 7.9 inches Total number of dots: 1,398,897 dots ((RGB) 591) dots LCD backlight life 20,000 hours (before brightness of the backlight is reduced to half) Input/Output connectors USB connector (Type mini B, Hi-Speed USB) USB connector (USB memory) Slots Memory Stick PRO (Standard/Duo)/SD memory card/MMC Compatible image file formats Photo: JPEG: DCF 2.0 compatible, Exif 2.21 compatible, JFIF*1 TIFF: Exif 2.21 compatible BMP: 1, 4, 8, 16, 24, 32 bit Windows format RAW (preview only*2): SRF, SR2, ARW (2.2 or lower version) (Some image file formats are not compatible.) Video: MotionJPEG*3 Maximum resolution: 726 dots 576 dots Audio compression format: LPCM/ ADPCM
Maximum bit rate: 12 Mbps Maximum frame rate: 30 fps (640 480) / 25 fps (726 576) Music: MP3*3 Sampling frequency: 32/44.1/48 kHz Bit rate: 32 kbps to 320 kbps Maximum number of pixels that can be displayed 8,000 (H) dots 6,000 (V) dots*4 File system FAT12/16/32 Image file name DCF format, 256 characters within 8th hierarchy Maximum number of files that can be handled 4,999 files for the internal memory or for a memory card Internal memory capacity*GB (Approx. 4,000 images*6 can be saved.) Power requirements DC IN jack, DC 12V Power consumption at the maximum load: 16.5 W normal mode*: 5.5 W
* The definition of the normal mode is a status which allows the performance of a slideshow using images stored in the internal memory with the default settings without inserting a memory card or connecting an external device.
Operating temperature 5 C to 35 C (41 F to 95 F) Dimensions (width/height/depth) [With the stand extended] Approx. 246 mm 179 mm 123.2 mm (9 3/1/7/8) inches [Without the stand extended] Approx. 246 mm 179 mm 23 mm (9 3/1/8 15/16) inches Mass approx. 742 g (1 lb 10 oz) (Excluding the AC adaptor)

- M2. M2 - Memory Stick Micro. M2 Memory Stick Micro. / MagicGate. MagicGate Sony . 8 .
Memory Stick, , Memory Stick - Sony: http://www.memorystick.com/en/support/ support.html ( , , .) Memory Stick , . Memory Stick Micro, Memory Stick Micro M2. Memory Stick Micro M2, , , Memory Stick Micro. Memory Stick Micro M2 M2 Memory Stick Duo,
Memory Stick*2 ( MagicGate) MagicGate Memory Stick*2 Memory Stick PRO*2 Memory Stick PRO-HG*2 Memory Stick Micro*3 (M2*4)

OK*5 OK*5 OK*5*6 OK*5

FAT32. Memory Stick 32 , Sony Corporation. , Memory Stick. , , Duo. Memory Stick , Memory Stick Duo, Memory Stick Duo. Memory Stick Micro
. Memory Stick . , . . Memory Stick . , , LOCK. - , . , . , .
SD : SD*1 miniSD, microSD (.)*2 SDHC*3 miniSDHC card, microSDHC card (.)*2 MMC*4 SD MMC.
SD 2 . . . SDHC 32 . MMC 2 .

/ , , . SDXC .

, . . , , / . , , . , . . , , . . . , . . . : , , , , / ,

, , ,

./. 39, 43. 43 40 39, 43 39, 43
13, 58 Memory Stick 58 SD 59 60

USB 52 8, 9

7, 13
44 EXT INTERFACE 7, 46 USB A 7, 46 19 29 18 - 16
./. 11 21 26 RESET 7, 56
(Language) 44 - 43 - 24, 43 24 . 25. 44 . 45

USB B 7, 48

. 45 13 20 37

42, 43, 44, 45 10

Macintosh 47 Windows 47

44 17

13 30 44 20

38 34. / 12, 43 35

55, 59 38 46

. 35, 45 5

Sony Corporation