Federal Communications Commission (FCC) Radio Frequency Interference Statement
This equipment has been tested and found to comply within the limits of a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment to an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help.

G-Note Series

Digital Note Recorder

User manual

Trademark Information
Genius and G-Note are registered trademarks of KYE SYSTEM Corporation. Microsoft and Windows are registered trademarks of Microsoft Corporation. Pentium is a registered trademark of Intel Corporation. Adobe and Acrobat are registered trademarks of Adobe Systems Inc. All other trademarks are the property of their respective owners.

Copyright Notice

2005 KYE SYSTEM Corp. All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted, in any form or by any means (electronic, mechanical, photocopying, recording, or otherwise), without the prior written permission of the publisher.

www.geniusnet.com

Note: Specifications mentioned in this manual are subject to change without notice.

Contents

CONTENTS..... 2 1. INTRODUCTION.... 4 1.1 POSSIBLE APPLICATIONS....4 1.2 SYSTEM REQUIREMENTS...4 1.3 PACKAGE CONTENTS....5 2. PARTS OF THE G-NOTE... 6 2.1 INSTALLATION OF THE BATTERIES...8 2.2 INSTALLATION OF THE INK PEN BATTERY...9 2.3 ATTACHING A PAPER NOTEPAD...10 2.4 BUILT IN STORAGE DEVICE...11 3. G-NOTE OPERATION INSTRUCTIONS.. 12 3.1 FRONT PANEL BUTTONS...12 3.2 TURNING ON THE EQUIPMENT...12 3.3 STARTING A NEW PAGE...14 3.4 MODIFYING NOTES....14 3.5 DELETING PAGES...15 3.6 CONFIGURING YOUR G-NOTE...16 3.6.1 The Rotate menu...17 3.6.2 The Workbook menu...18 3.6.3 Setting the auto-suspend timer(3-60mins)..22 3.6.4 The remaining disk space / battery capacity display.23 3.7 TURNING OFF THE G-NOTE....23 4. THE DIGITAL ORGANIZER... 24 4.1 INSTALLING THE DIGITAL ORGANIZER SOFTWARE..24 4.2 DOWNLOADING DIGITAL PAGES FROM THE G-NOTE..25 4.3 IMPORTING DIGITAL PAGES...26 4.4 USING THE G-NOTE AS A PEN TABLET..27 4.5 THE DIGITAL ORGANIZER MAIN SCREEN..28 4.5.1 Show/Hide lines on the notepad..28 4.6 THE STANDARD TOOLBAR...29 4.7 THE ANNOTATE TOOLBAR...34 4.8 THE DIGITAL PAGE TOOLBAR...38 4.9 OTHERS....40 4.9.1 Insert background picture..40 5. RECOMMEND SOFTWARE INFORMATION.. 41

APPENDIX.... 42 REPLACING THE INK CARTRIDGE OF THE DIGITAL PEN.. 42 REPLACING THE BATTERY OF THE DIGITAL PEN... 42 TAKING CARE OF YOUR G-NOTE... 43 TROUBLESHOOTING... 44 GLOSSARY.... 46 TECHNICAL SPECIFICATIONS... 47

1. Introduction

The G-Note Series digital note recorder allows you to instantly capture notes or diagrams written in ink on normal paper, and then transfer a digital copy to a PC for viewing, editing, or sharing by email. G-Note supports both portrait and landscape mode, and its unique multi-color ink recognition concept greatly adds to the versatility and functionality of the device.
1.3 Package contents G-Note 5000
1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. G-Note 5000 digital note recorder 1 x A5 notepad 1 x black digital ink pen(when connect to PC, can be pen of G-Note as Pen Tablet), 1 x red digital ink pen 3 x black ink refills (stored in the battery compartment) USB cable for G-Note 5000 (100cm) 4 x 1.5 volt AAA-size batteries for G-Note x 1.4V button cell battery for digital ink pens Digital Organizer software, MyScript Notes FOR U software 30days trial version CD-ROM with electronic user manual Mini screw driver Warranty card Quick installation guide
1.1 Possible applications
G-Note can be deployed in any situation where both a paper hardcopy and a digitized soft copy are required, such as taking meeting minutes and lecture notes, but also in the electronic capture of signatures, the processing of police and medical records, or to conduct polls and the completion of forms.

1.2 System requirements

Windows 2000, XP, or higher Pentium III 500Mhz CPU or equivalent or higher Minimum 128MB RAM Minimum 32MB free hard disk space One free USB port CD-ROM drive

G-Note 7100

1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. G-Note 7100 digital note recorder 1 x A4 notepad 1 x black digital ink pen(when connect to PC, can be pen of G-Note as Pen Tablet), 1 x red digital ink pen 2 x black ink refills and 1 x red ink refill USB cable for G-Note 7100 (150cm) 4 x 1.5 volt AAA-size batteries for G-Note x 1.4V button cell battery for digital ink pens Digital Organizer software, MyScript Notes FOR U software 30days trial version CD-ROM with electronic user manual Mini screw driver Warranty card Quick installation guide 1 x portfolio

*Please contact your retailers if some of these items missing or damaged.

2. Parts of the G-Note

G-Note 5000

Digital ink pen

Power on/off

Pen slot

USB port LCD display
Function buttons Normal paper
USB port USB port Writing area The writing area is the area on the G-Note 5000 where the notepad is placed and everything you write or draw with the digital ink pen is captured by its built in digitizer. The writing area is 150 x 210mm (5.9" x 8.3"). Thickness of the notepad The G-Note 5000 supports standard A5 notepad with a maximum thickness of 15mm.

Ink Refills

Battery compartment
Writing area The writing area is the area on the G-Note 7100 where the notepad is placed and everything you write or draw with the digital ink pen is captured by its built in digitizer. The writing area is 210 x 263mm (8.3" x 10.3"). Thickness of the notepad The G-Note 7100 supports standard A4 notepad with a maximum thickness of 5~7mm.
2.1 Installation of the batteries
1. Remove the small screw of the battery compartment cover with the included mini screwdriver. 2. Open the battery compartment of the G-Note by lifting its cover while pressing the release latch inward. Insert four batteries (1.5 volt, size AAA) into the battery compartment observing the pole directions as indicated on the inside of the cover. Close the battery compartment by snapping its cover into place.
Four AAA alkaline batteries can use approximate 100 hours continuously. Battery run time varies based on the usage pattern of an individual user. Different brand batteries also may influence battery life. Empfehlung: Wenn Sie Ihr G-Note in die Tragtasche stecken, brauchen Sie die Batterieabdeckung nicht zu verriegeln.
2.2 Installation of the ink pen battery
Unscrew the top part of the digital ink pen and insert the included button cell battery with the negative (-) pole facing the pen tip. Screw both barrel parts together until tight.

(-) pole

(+) pole
Incorrect battery installation will result in the malfunction of the digital ink pen. INPORTANTRemove cover before inserting pen battery. Always turn off the G-Note before inserting new batteries. Removing batteries without turning off the equipment will cause file errors. Incorrect battery installation may cause file errors. The battery of the digital ink pen will last for approximately 14 months. Recommended button-cell batteries: Brand: Type: GP GPZA13 IEC/JIS PR48 Eveready AC13E Varta V13 Duracell DA13X
WARNING! When set the battery by wrong way, will leak out liquid
through by the battery. Do not mix new and used batteries. Remove the batteries from the G-Note if it is not expected to be used for long periods.(over 30 days) When the batteries run out of power remove them or insert new batteries.

Recommended ink refills 1.PLATINUM ball point pen refill, Model:BSG-25 2.Other ball point pen refill made by Ni-CuDimension 67.16(L) x2.3mm
2.3 Attaching a paper notepad
Attach a standard G-Note 5000A5 (150 x 210mm) notepad G-Note 7100A4/Letter (210 x 263mm) notepad by sliding its carton backing down into G-Note pad stand. Do not try to force too large notepad into the G-Note
2.4 Built in storage device
The G-Note is equipped with a built-in 32MB flash memory to store your handwritten notes as a series of digital pages in a G-Note file (*.dnt). Windows will recognize the flash memory as a removable disk.

Working Area G-Note 5000

Wide20mm Wide10mm

Maximum Thickness

0 mm 2~5 mm 5~7mm
3. G-Note operation instructions
After you have completed the installation of the batteries and the notepad you can start in writing or drawings with the digital ink pen. Your notes will instantly be captured and stored in the memory of the G-Note as a series of digital pages in a G-Note file for later retrieval on your PC. This section will explain the main functions of the G-Note.
Testing the digital ink pen Make sure that you have installed the button cell battery in the digital pen before proceeding with the following tests (see section 1.6 for battery installation instructions). Hover the digital pen closely over the notepad. The pen icon on the LCD display will turn white to indicate that the pen is operational and within reading distance of the built-in digitizer of the G-Note.

3.1 Front panel buttons

Note taking mode POWER NEW UP DOWN Power on/off Start new page Previous page Next page Configuration menu MENU ENTER UP DOWN ESC Call up menu Confirm Select value up Select option down Cancel and return
The pen icon on the main screen will turn black as soon as you touch the pen tip down on the notepad. The G-Note will now record all pen strokes that you write on paper. If the Pen icon does not appear while you are writing, verify if the button cell battery is properly installed and has not run out of power. You may use the digital pen as a normal ballpoint pen to write on any piece of paper. However, do not use a normal ballpoint pen to write on the G-Note as notes will not be recorded. The LCD display

Page counter

DELETE Erase page in memory

Workbook

(hundreds 0-1)
3.2 Turning on the equipment
Powering up the G-Note button on the front Press and hold the Power panel for a few seconds until you see the power-on smiley appears on the LCD display. After a second the main screen of the G-Note will appear.
Battery status Page counter

(decimals 0-99)

Page status Pen icon
Black ink Red ink New blank page Page with contents
Page counter The decimal two digits of the page counter are enlarged in the center of the screen, whereas the hundreds (0-1) are displayed behind the hyphen in the top row of the display. Although the G-Note 5000 theoretically has the ability to manage up to 99 workbooks of 199 digital pages each, in practice such ability is limited to the maximum storage capacity of the built-in flash memory. The G-Note 5000 has a storage capacity of 32MB, which is about 150 digital pages, and G-Note 7100 is about 75 pages.

3.5 Deleting pages

Pressing the Delete button equals tearing off or crossing out a paper sheet of the notepad. After pressing the Delete button a security warning will appear on the LCD screen. Press Press to confirm the operation to cancel and return to note taking mode

3.3 Starting a new page

Press the New button every time you turn a paper sheet on the notepad to start a new page. It is strongly recommended to number the sheets on your notepad and copy the workbook and page number on the LCD display each time you turn a sheet. This will help to synchronize the paper sheets with the workbooks and digital pages in the G-Notes memory. To avoid the creation of superimposed digital pages, make sure that the page status indicator on the LCD screen displays an empty page before you start writing on a new page. A densely written paper sheet will take up more memory space than a half empty one.
Be very prudent not to push the Delete button accidentally, as the contents of an erased digital page in memory can not be recovered, and page number synchronization may become corrupt! Although deleting pages using the Delete button will free up memory space, this method is mainly provided as an emergency option. It is recommended to use the Digital Organizer software that comes with the G-Note to delete pages from memory after download to a PC.

3.4 Modifying notes

Press the Page Up button to browse previous sheets and make corrections or additional notes. You may turn back several sheets at a time to check earlier notes. However, if you want to make additions on a particular sheet, you must synchronize the page counter by repeatedly pressing the Page Up button until the page counter indicates the same number as the one you have marked on the sheet itself. Press the Page Down button to continue working on the sheet with your most recent notes. Press the Page Down button after browsing previous sheets on your notepad. This will return the digital page record to the sheet with your most recent notes.

User can see the version information on LCD display. After 5 seconds, it will return to note taking mode.
4. to open tablet function (default) or select Press to close tablet function, and then press to confirm the operation.
Return to note taking mode Enter Esc Return to main menu Return to note taking mode
3.6.3 Setting the auto-suspend timer (3-60mins)
1. Press to select the suspending sub-menu.
3.6.4 The remaining disk space / battery capacity display
1. Press to select the status menu.
The default idle time is set at 15 minutes.
Remaining disk space in % Remaining battery capacity in %
3. Press or to increase or decrease the idle time (from 3 ~ 60 minutes) after which the G-Note will automatically switch off.
to return to the main menu.
to confirm and return to the main menu.
3.7 Turning off the G-Note
Enter Esc Return to main menu Return to note taking mode
Press and hold the Power manually switch off the G-Note.
button for about three seconds to

4. The Digital Organizer

The Digital Organizer lets you view, edit, annotate, or e-mail your digital pages in Windows. You can download the digital pages from the G-Notes built in memory to your computer, and organize, rename, delete, or save them in most frequently used file formats like JPG, BMP, or PDF.
4.2 Downloading digital pages from the G-Note
1. Take the G-Note USB cable that is included in the package, and plug the small connector of the cable into the USB connector on the G-Note 7100. Make sure your computer is turned on and plug the wide connector of the cable into an available USB port on your computer 2. The LCD display will show a USB connector diagram to confirm that you have successfully established a USB connection between the G-Note and your PC, and that the G-Note is in pen tablet mode (see section 4.4).
4.1 Installing the Digital Organizer software
1. Turn on your computer and start Windows 2. Insert the Digital Organizer CD into the CD-ROM driver. If your system has the Auto run function enabled, your screen will display the setup screen menu. If the setup screen did not appear after a while, double click my computer on the Windows desktop, and then the Compact Disc icon and the Setup icon in succession.
G-Note in pen tablet mode
The G-Note will not be able to capture notes while it is in pen tablet mode. Do not use the 32MB flash memory of the G-Note as a storage disk as file errors may occur! The G-Note wont use battery power but will receive its power from the computer during the USB connection.

3. Confirm the location of the destination folder (recommended) and click [OK].
4. To proceed with the installation, click [OK], wait until the installLatino is completed, and click [OK] again.
4.3 Importing digital pages
1 After you plug in the USB connector to your PC, Note Notifier screen will comes automatically. Press [OK] to confirm. Use the dialog to select [Copy File(s)] or [Moving File(s)].
4.4 Using the G-Note as a pen tablet
As soon as you have established a USB connection with your PC, the GNote will instantly double as a pen tablet. You can use the digital ink pen as input styluses in a much the same way as the stylus of a traditional pen tablet, a tablet PC, or hand-hold computer. In pen tablet mode, you can hover the pen over the writing area to navigate the cursor across the screen, tap and double-tap on program icons to select and open them, and annotate your notes in the Digital Organizer program as well as in mainstream applications that allow freehand pen input. For a correct mapping of the screen you must turn the G-Note as the
Then your screen will display another new screen to show the transferring status.

same direction as

USB connector showing on LCD display.
Avoid direct contact between the pen tip and the writing area surface. Cover the writing area with a sheet of paper, or just use an empty page of your notepad when using the G-Note in pen tablet mode. This will avoid scratches or ink traces on the D-Notes surface. 4 When the transfer finished, we can find a new folder named NoteFiles in My Document.
4.5 The Digital Organizer main screen
To start the program in Windows 2000 (or XP), double click on the G-Note icon on the Windows desktop. Alternatively, click [Start] [Programs] [G-Note] [G-Note icon ]. The Digital Organizers main window will appear on your screen:
Standard toolbar Annotate toolbar

4.6 The standard toolbar

Located at the upper left of the screen, the standard toolbar contains icons for all usual desktop functions like opening, saving, printing files, cut, copy, or paste selections, etc. A detailed description of its icons below. New Create a new G-Note digital page from scratch.

Digital page toolbar

G-Note Explorer pane
Thumbnail pane Notepad pane
Open an existing G-Note file. Use the dialog to locate the file in the G-Note flash memory, or on your hard disk
4.5.1 Show/Hide lines on the notepad
Select Show lines on the notepad from the View menu to show or hide the lines on the Notepad pane.
Save the currently selected digital page. The page will be saved as a G-Note digital page with a.DNT file name extension.

Save as

Save the currently selected digital page under another file name or in another file format (e.g.dnt,.jpg,.bmp,.pdf,.notes, etc.)
Delete New Folder In G-Note Explorer, click on a folder where you want to create a subfolder, and click on the New folder icon. Key in an appropriate folder name, and press [Enter]. You can easily move a specific selection of digital pages by dragging the thumbnails from the Thumbnail pane to the new folder in the G-Note Explorer pane. Select and hold down the Shift-key on the thumbnails to select consecutive pages, or the Ctrl-key to select nonconsecutive pages, and drag the pages to the new folder you created in the GNote Explorer pane. Freeing up space on the flash memory You can free up space or even totally erase the flash memory of the GNote by moving a selection or all digital pages to your hard disk: Select the G-Notes Removable Disk in the G-Note explorer, select the digital pages you want to erase (see section 4.8 under Selection techniques), and click on the Delete icon in the Standard toolbar. Make sure to make back-ups of the digital pages in the flash memory of the G-Note by copying them to a folder on your hard disk before erasing them. Once erased digital pages cannot be recovered! Rename Click on the Rename icon and key in the new name in the thumbnails caption. E-Mail [Cancel] to abort this action. Organizing digital pages on your hard disk
Click on the Delete icon to delete the selected digital page(s). Click [OK] to confirm, or
Digital pages that are deleted using this function can not be recovered!
Use the E-Mail icon to attach your selection of digital pages in the Thumbnail pane as a series of JPG file attachments, or as a multipage PDF file, in e-mail programs such as MS Outlook or Outlook Express. 1. After clicking on the E-Mail icon your selection will appear in the Attach file(s) dialog box.
2. Hold down the Shift-key and move the cursor to the right to select consecutive pages.
3. Or hold down the Ctrl-key and click on individual file names to select nonconsecutive pages.
4. Click on the [Add File] button in the dialog box, and browse to the digital page files on your hard disk that you would like to add to your selection. Click on the [Move up] or [Move down] buttons to change the order of the pages. In the drop down menu, select whether you want to attach the pages as JPG files or a PDF file. 5. Click on the [Attach] button in the dialog box to finalize the operation. Your e-mail program will open and your pages will be attached as a series of JPG files, or

To add files to your selection from other places on your hard disk click on the [Add File] button in the dialog box, and browse to the files you want to add. Click on the [Move up] or [Move down] buttons to change the order of the pages in the PDF file, or [Remove file] to remove a digital page from your selection. Click the [Convert] button to finalize the operation and save your selection in a folder of your choice on your hard disk. Print Cut Copy Paste Print the currently selected digital page Cut the selected strokes or objects in the Notepad pane Copy the selected strokes or objects in the Notepad pane Paste the selected strokes or objects in the Notepad pane Undo the last action Redo the last action Click on the down arrow in the Zoom drop down menu and select the zoom factor.
6. as a multi-page PDF file. Undo Redo
Zoom Save as PDF With the Save as PDF icon you can compile and save your digital pages as a multi-page PDF file. First, create a selection of digital pages in the Thumbnail pane by holding down the Shift-key to select consecutive pages, or the Ctrl-key to select nonconsecutive pages. Then click on the Save as PDF icon to open the dialog box and select the digital pages(s) you wish to save as a multi-page PDF file.

Handwriting Recognition

Genius free support MyScript Notes FOR U software 30days trial version with 13 Languages as available. If full version or more languages requested, please contact with your retailers or distributors. Click on the About icon to check for the latest software updates of the Digital Organizer program.

4.7 The annotate toolbar

3. Select the pen color. Click on the [More Colors] button to expand the color menu. Click the [OK] button to confirm.
The Annotate toolbar lets you annotate your digital pages with pens and highlighters in various colors and shapes. A built-in eraser function is provided to easily make corrections. You can use the pen tablet functionality of the GNote (see section 4.4) to quickly and conveniently annotate your digital pages. D-Note pen properties 1. Start with selecting the objects you want to modify with the Select tool (see below). The selection will then appear in a selection box. You can now change pen tip colors and shapes, and click the [OK] button to confirm. Highlighter Select the Pen icon to annotate the Notepad pane with the pen tool. There are 4 different shapes (curveline ellipse rectangle) to select. Select the Highlighter icon to highlight parts of the Notepad pane with transparent highlighter ink. There are 4 different shapes (curvelineellipse rectangle) to select. Select the Erase stroke icon to clear pen strokes or objects one by one by moving the eraser cursor over the stroke(s) you want to delete. There are 4 different areas to select.

Use this dialog box to select the pen type, and the color and shape of the pen tip, and modify the recorded notes in the Notepad pane.
2. Select the pen-tip shape. Click the [OK] button to confirm.

Erase stroke

Select tool: Copying and moving objects Drag the cursor over the area or objects in the Notepad pane that you want to select for cutting, copying, or pasting through the Cut, Copy, or Paste commands, or restyle through the Annotate pen properties command. You can directly copy and paste your selection in Microsoft Office programs such as Word, Excel, and Outlook for further processing or sending by e-mail.
2. Select the pen tip shape. Click the [OK] button to confirm.

MS Outlook

MS Word

MS Excel

Annotate pen properties 1. Start with selecting the objects you want to modify with the Select tool (see above). The selection will appear in a selection box. You can now change pen tip colors and shapes, and click the [OK] button to confirm.
Use this Pen Properties dialog box to modify the annotations in the Notepad pane.

Result

Pen tip shape
Click on the Pen tip shape icon to select the size and shape of the pen tip. Changing the pen tip shape allows you to create some stunning calligraphy. Pen Highlighter

Pen tip color

Click on the Pen tip color icon to open the color menu and select or change the colors of the pen or highlighter. Click on [More Color] to expand the color menu.
Click on the Untangle icon to open a dialog box consisting of two pages:
Frame slider and up and down arrows
4.8 The Digital page toolbar
The Digital page toolbar offers some powerful functions to manipulate and repair your digital pages.
The top page will present the earlier recorded page. The Digital Organizer software will automatically try to guess at what point in time you forgot to press the New page button. The bottom page will show the notes and diagrams of the superimposed page.
You can fine tune the untangling process by dragging the frame slider up or down the scroll bar, and release the left mouse button. You can also click on the up or down arrows at the top or bottom of the scroll bar to step through the note recording frame by frame. Click on the [Untangle] button to divide the superimposed pages into two new and repaired ones. Rotate page Rotate the currently selected digital page clockwise or counterclockwise. Move to the previous digital page in the Thumbnail pane. Move to the next digital page in the Thumbnail pane.

Replacing the battery of the digital pen
Even though the battery of the digital pen will last for approximately 14 months, the battery in the pen may be exhausted if you receive erratically missing, lengthened, shortened, or twisted digital ink strokes, or a significant decrease of the thickness of the strokes. If so, please replace the battery (refer to section 1.6 for instructions as to how to replace the pens battery).
Do not use or store the G-NOTE in the vicinity of equipment that generates strong electromagnetic radiation or magnetic fields. When not in use, please put back on the pen point cap to save energy mode. Otherwise, avoid to frequency influenced.

Troubleshooting

A superimposed digital page is created. Make sure to press the new button on the front panel every time you turn a paper sheet on the notepad to start a new digital page, and make sure that the Page icon on the LCD display shows an empty page. Note: You can repair superimposed pages with the Untangle function (see section 4.8). The G-NOTE has recorded only part of all notes. The batteries in the G-NOTE may have run out of power during a note taking session. Please replace the batteries (see section 2.1 for instructions). The battery in the digital pen may have run out of power during a note taking session. Please check if the pen icon on the LCD display is or black (see also section 3.2) in note taking mode either white to assure the digital pen is working. Please check if the battery cover is properly closed in note taking mode. You may have used a notepad thicker than the maximum thickness. This will cause the digital pen tip to move outside of the reading height range of the G-NOTE. Please check if the pen icon on the LCD or black (see also section 3.2) in note display is either white taking mode to assure a proper reading height distance. After you have switched on the device, it may take a second or two for or - to appear on the LCD display. Please give the page icon the G-NOTE the chance to properly start up. You may have set the auto-suspend timer to too short a period of idle time (see 3.6.3.). Please increase the auto suspends time. Do not use two pens at the same time, or place one pen on the notepad while writing with the other one. G-Note didnt connect to PC yet.

Specifications changed without prior advice, please go through our website at www.geniusnet.com for upgrade.