KTC-D500E

DIGITAL TV TUNER

INSTRUCTION MANUAL

C B64-3808-00/00 (E)

Contents

Safety precautions 3 Notes 4

Getting Started

Switching to Digital TV Screen Functions During Digital TV Screen Functions During Digital TV Screen Touch Operation

Displaying EPG

Viewing the Program Guide
Channel Search and Channel List
Searching for currently available station (Auto Scan) Manually Searching Station (Manual Search) Selecting a station from Channel List Erasing Channel List
Basic Operation (When connected with DDX7029 )
Functions When Displaying the Easy Control Panel Functions While Displaying the Control Screen
Setup Basic Operation (When connected with DDX6029 )
Displaying the Easy Control Panel Displaying the TV Control screen
System Setup Setting the Clock Updating the Software Restoring to Factory Default
Basic Operation (When connected with LZ-760R )
Functions While Displaying the Control Screen

Information and Conax 9

9 Displaying Information Setting CA Control
Remote Control Unit 18 List of Accessories 20 Installing the Digital TV Tuner 21 Installing and Connecting the Remote Control Receiver 22 Inserting Pay Card 23 Connection 24 Specifications 25

Safety precautions

2WARNING
Mounting and wiring this product requires skills and experience. For safetys sake, leave the mounting and wiring work to professionals.

2CAUTION

Make sure to ground the unit to a negative 12V DC power supply. Use only the screws provided or specified for installation. If you use wrong screws, you could damage the unit. If your vehicles ignition does not have an ACC position, or if the ignition wire is connected to a power source with constant voltage such as a battery wire, the power will not be linked with the ignition (i.e., it will not turn on and off along with the ignition). If you want to link the units power with the ignition, connect the ignition wire to a power source that can be turned on and off with the ignition key. If the fuse blows, first make sure the wires arent touching to cause a short circuit, then replace the old fuse with one with the same rating. After the unit is installed, check whether the brake lamps, blinkers, wipers, etc. on the car are working properly.

English

Monitor units that can be connected to this unit
group DNX7200 KVT-829DVD KVT-729DVD DDX8029 DDX7029 KOS-V500 KOS-V1000 group DDX6029 KVT-827DVD KVT-727DVD KVT-627DVD DDX8027 DDX6027 KVT-M707 group LZ-760R group Unit with RCA video input This Product is not installed by the manufacturer of a vehicle on the production line, nor by the professional importer of a vehicle into an EU Member State.
Information on Disposal of Old Electrical and Electronic Equipment (applicable for EU countries that have adopted separate waste collection systems)
Products with the symbol (crossed-out wheeled bin) cannot be disposed as household waste. Old electrical and electronic equipment should be recycled at a facility capable of handling these items and their waste byproducts. Contact your local authority for details in locating a recycle facility nearest to you. Proper recycling and waste disposal will help conserve resources whilst preventing detrimental effects on our health and the environment.

How to reset your unit

If the unit fails to operate properly, press the Reset button.
Lets view some digital broadcasts.
Switching to Digital TV Screen
Functions During Digital TV Screen
Press [V.SEL] on the monitor to switch to Digital TV Broadcasting.
Basic functions are available even when the TV screen is displayed.

TV TV1

Preset 3 Mode : F u l l

AV- O U T: AV- I N

When you first switch to digital TV broadcasting, a Welcome Menu appears and Auto Scan starts.
1 Picture Source Display Area Displays the TV Status, Display Mode, and AVOUT settings (page 13). 2 Channel Down Search Area Searches downward and selects the channel. 3 Channel Up Search Area Searches upward and selects the channel. 4 Menu Control Area ( group only) Displays the Menu Control screen (page 11). 5 Information Display Control Area Turns ON/OFF the display of information in the Picture Source Display Area 1 and Source Information Display Area 2. 6 Audio Source Information Display Area
When Auto Scan ends normally, a Channel List containing channels available at the current location is created and the first channel is displayed. Auto Scan may have been performed already at the dealer where the unit was installed. The display language can be changed (page 13). There are four ways to select the desired station. - By searching for available station - By selecting from EPG (Electronic Program Guide) (page 10) - By selecting from the Channel List (page 12) - By specifying a channel number (page 11) You can add the selected channel to the Channel List if it is not already listed.

Touch Operation

Menu Control Screen appears by touching the area shown below.
1 Channel Down Search Area Searches downward and selects the channel. 2 Control Screen Display Area Switches to Control Screen. 3 Channel Up Search Area Searches upward and selects the channel.

MenuCtrl

Return
When the Control Screen is displayed, touch [OK] or wait approximately 10 seconds. The Digital TV Screen will reappear.
Shows EPG Screen (page 10). Shows DVB Menu Screen (page 11). Returns to previous screen. Executes selected menu item. Returns to Digital TV Screen. Moves highlight in DVB menu.

[List of abbreviations]

CH Channel EPG Electronic Program Guide OSD On Screen Display PIG Picture in Graphic 6 KTC-D500E
RCU Remote Control Unit STB Set Top Box Normally this will be built in to the vehicle and it will not be necessary for the user to access it. TV Television
Various control screens appear in the Digital TV Source mode. (You can only operate Digital TV with the optional accessory Digital TV Tuner connected.)
Functions When Displaying the Easy Control Panel
Displays a floating control panel in the screen.

TV Mode : F u l l

Switches to control screen to use various playback functions.

2ch AV- O U T: AV- I N

2ch AV-OUT: AV- I N 3 SCRN

2ch AV-OUT: AV- I N SCRN

SRC TV
1 Switches the source. 2 Select a channel. 3 Displays the Screen Control screen. (page 7 for the <Functions While Displaying the Control Screen>)
The Easy Control Panel display is hidden when you touch a central area of the monitor.

EXT SW

1 Select a channel. 2 Channel Number Display
Basic Operation (When connected with DDX6029 )
Various control screens appear in the Digital TV/ Video Source mode. (You can only operate Digital TV with the optional accessory Digital TV Tuner connected.)
Displaying the Easy Control Panel
The Control Panel is displayed in a floating position of the TV picture.

Displaying the TV Control screen
You can tune in a TV station using various functions.
Preset 1 2ch MODE:FULL AV-OUT:DVD

4 SCRN

AME Group1

VID Group1

T V Preset 1

SEEK Preset 1

Switches the source. Switches to Video (VIDEO). Select a channel. Displays the Screen Control screen. (page 8 for the <Displaying the TV Control screen>)
Calls the Sound Effects Menu. Displays the Source Select screen. Calls the Setup Menu. Switches to VIDEO. Select a channel.
The Easy Control Panel display is hidden when you touch a central area of the monitor. Buttons other than mentioned above are disabled in DVB mode.
Buttons other than mentioned above are disabled in DVB mode.
1 Select a channel. 2 Closes Control Screen and shows Digital TV screen.
Receiving and displaying EPG (Electronic Program Guide) sent together with a program.
You can check the programs on each channel in the EPG (Electronic Program Guide). 1 Show EPG by pressing [EPG] key EPG appears. 2 Select the channel or time to display
On the EPG, you can change the displayed channel by touching [5] or [] and time frame by touching [2] or [3]. 3 Touch [Return] ( ) when you are finished
A "no data" message will be displayed if the selected channel does not provide EPG data. It can also be displayed from the Menu Control screen.
The available stations (TV/Radio) are saved in the Channel List.
Searching for currently available station (Auto Scan)
Search for currently available stations and save them in the Channel List. 1 Show DVB Menu by pressing [MENU] key
Manually Searching Station (Manual Search)
Search a station by specifying area or channel. 1 Show DVB Menu by pressing [MENU] key 2 Touch [5] or [], select [Channel Search]
2 Touch [5] or [], select [Channel Search]
3 Touch [3] 3 Touch [3] 4 Touch [5] or [], select [Manual Search] 4 Touch [5] or [], select [Auto Scan] 5 Touch [Enter] ( 5 Touch [Enter] ( ) 6 Touch [5], [], [2], or [3] to select TP Number, bandwidth, frequency, or CH number Channel search is performed and the available channel is saved in the channel list. )
When you perform Auto Scan, the content of the current channel list is discarded and a new list is created. To search for available channels without discarding the content of the current channel list, perform channel search from the Digital TV Screen (page 5).

Manual search is for advanced users and offers the ability to search for specific channels. Regular users are recommended to use "Auto Scan" (page 11).
Selecting a station from Channel List
Stations that are available by Auto Scan or other methods are saved in the Channel List. 1 Show DVB Menu by pressing [MENU] key

Erasing Channel List

Erase channels registered in the Channel List. 1 Show DVB Menu by pressing [MENU] key 2 Touch [5] or [], select [CH Manager]
2 Touch [5] or [], select [CH Manager]
3 Touch [3] 3 Touch [3] 4 Touch [5] or [], select [TV Channel List] or [Radio Channel List] 5 Touch [Enter] ( ) 4 Touch [5] or [], select [Erase All Channels] 5 Touch [Enter] ( The Channel List appears and the program of the currently selected station appears in the PIG (Picture in Graphic) screen. In addition Channel Information is shown underneath the PIG screen. 6 Touch [5] or [] to select a channel )
A confirmation message appears. 6 Touch [Enter] ( )
All channels in the Channel List are erased.
When you move the cursor down the channel list, the PIG screen will change accordingly. 7 Touch [Enter] ( )
After Deleting all the Channels pressing TV Channel List or Radio Channel List will cause a message box to be displayed: No TV Channel List or No Radio Channel List.
The received channel is switched.
Setting this unit's behavior and clock.

System Setup

Set the behavior of this unit such as the display language and aspect ratio. The following items can be set: OSD Language TV Aspect Ratio User could select the desired language. This function provides 4:3 and 16:9 two ratio for user to select. If your display supports 16:9 screen format and selected channel provides 16:9 format program, select 16:9. There are four screen format could be selected, Full, Pan&Scan, Letter Box, and Combined. User could set the auto switching interval time from OFF to 30 Seconds when the box cannot receive the video signal. User also could use the [A] to [Z] key on the RCU to switch the signal immediately. Select the TV signal type (PAL or NTSC) according to the display. Set "0/5 Volt" ON when connecting an antenna with booster amplifier to this unit. This function provide user to select the unit at a power on mode or a stand by mode. If the user select the unit at power on mode, when user turn on the car, then the unit will be turned on at the same time. If user connect to an amplifier, user could use the volume rate to control the volume. There are 18 levels could be selected.

1 Show DVB Menu by pressing [MENU] key 2 Touch [5] or [], select [Setup]

TV Screen Format

3 Touch [3] 4 Touch [5] or [], select [System Setting] 5 Touch [Enter] ( )

Auto Switching Interval

TV Type 0/5 Volt
System Setup Menu appears. 6 Touch [5] or [] to select the item to set 7 Touch [2] or [3] to select the value to set

Power On Option

Volume Rate Control
Depending on the country where you buy your receiver, some functions might not be available in this menu. If you changed the "0/5 Volt" setting, perform Auto Scan.

8 Touch [Return] (

) when you are finished

Setting the Clock

Set the clock to the network. Also set the time zone and summer time as necessary. 1 Show DVB Menu by pressing [MENU] key 2 Touch [5] or [], select [Setup]

Updating the Software

Download the new software from the network and update the software installed in this unit. 1 Show DVB Menu by pressing [MENU] key 2 Touch [5] or [], select [Setup]
3 Touch [3] 4 Touch [5] or [], select [Clock Setting] 5 Touch [Enter] ( )
3 Touch [3] 4 Touch [5] or [], select [Software Upgrade] 5 Touch [Enter] ( )
Clock Setting menu appears. 6 Touch [2] or [3] to select the value to set
If there is a new software, it is downloaded and this unit's software is updated.
This function is only available when the network supports this feature. When new software is loaded, this might have different functions than the software you are using now. This manual might not be accurate anymore for the new software version.

7 Touch [Return] (

Real-time data (Year, Month, Date, and Hour) will automatically be downloaded when the Clock Setting Menu is shown.
Restoring to Factory Default
Restore this unit's settings to factory default. 1 Show DVB Menu by pressing [MENU] key 2 Touch [5] or [], select [Setup]
3 Touch [3] 4 Touch [5] or [], select [Factory Default] A confirmation message appears. 5 Touch [2] or [3] to show [OK]

6 Touch [OK]

Information and Conax
Displaying information and setting Conax.

Displaying Information

Display various system information, smart card expiration date, and Conax information. 1 Show DVB Menu by pressing [MENU] key

Setting CA Control

Set channel access control (CA Control) for channels broadcasting programs of specific genre. 1 Show DVB Menu by pressing [MENU] key

2 Touch [5] or [], select [Info & Conax.] 2 Touch [5] or [], select [Info & Conax.]
3 Touch [3] 3 Touch [3] 4 Touch [5] or [] to select the information to display 5 Touch [2] or [3] 4 Touch [5] or [], select [CA Control] 5 Touch [Enter] ( )
CA Control screen appears. 6 Touch [5] or [] to select an item and enter a value
The selected information is displayed.

7 Touch [Enter] (

This function is not available unless a card is inserted. You can change the [Card Level] by touching [2] or [3]. However, you must enter a password when [Enter CA PIN:] appears to change the Card Level setting. To change the password, enter the current password for [Enter CA PIN:] and new password for [Enter New CA PIN:] and [Confirm new CA PIN:].

Remote Control Unit

SUB TITLE

TV/RADIO

LANG TIMER AUDIO

PREVIEW

AUTO SCAN

SIGNAL %

Current channel info (toggle between pages in menu using 5//2 / 3).
a. Changes channels (channel up, channel down). b. Toggles between menu items (up/down).
Opens the Electronic Program Guide.
Toggles between menu items (left/right).
Powers the (STB) unit on and off.

Verifies input.

Mutes the sound. Volume mute only works in TV/Radio mode (i.e. not when a menu is opened).
a. Return to the previous menu in menu screen or escape from menu. b. Return to normal TV mode from a menu. Repeated pressing will take you through all opened menus until normal TV mode is reached.
Press once to enter Main Menu. The Main Menu consists of 4 sub-menus. CH Manager Channel Search Setup Info & Conax.

SUBTITLE

Switches to Subtitle Mode.

Loading battery

Page up Use one lithium battery (CR2025). Insert the batteries with the + and poles aligned properly, following the illustration inside the case.
a. TV/radio mode b. Page down

Switches language.

3 Replace the battery
RY TT BA BA RY RY TT TT R BA BA TT BA
Sleep timer. Press to set different times.

1 Keep on slide

Audio modes.

2 Pull out

Store unused batteries out of the reach of children. Contact a doctor immediately if the battery is accidentally swallowed.

Switches to teletext.

a. Selects a channel to watch. Press two numbers one after the other to go beyond 9 (e.g. press 2 and then 3 to go to channel 23). b. Selects a sub-menu item.

Do not set the remote control in hot places such as on the dashboard.
Pauses/resumes TV streaming images.
Returns to the channel you were watching previously.

Previews image display.

Changes to alternative frequency.

AUTOSCAN

Searches the network for available channels.

SIGNAL%

Signal power/quality bar

List of Accessories

1 Digital TV Tuner.. 1

2 Remote Control Unit. 1

3 Wiring harness.. 1
4 Remote Control Receiver..1

5 TV Interface Cable. 1

6 Bracket.. 2

7 Card Slot Cover.. 1

8 Screw (M34mm).6

9 Screw (416mm). 4

Installing the Digital TV Tuner
The Digital TV Tuner (main unit) can be installed by securing it to the pile carpet with Velcro or by screwing it on to a commercially available audio board.

Installing the Main Unit

There are various terminals on the main unit. Leave some space to connect cables on the terminal side of the main unit. Do not place anything on top of the main unit. This can cause product failure. Do not install the main unit stacked with other units. Install the main unit at least 1.5m away from radio antenna.

Installing with Screw

1 Use a tapping screw to secure the bracket to the
vehicle's audio board (commercial product).

Screw (M34mm) 8

Screw (416mm) 9
When drilling holes in the vehicle, be sure there is nothing on the other side. Damage to cables or pipes can cause accident or malfunction. Bracket 6 Bracket 6

Digital TV Tuner 1

Audio board (commercial product)
Installing and Connecting the Remote Control Receiver
Paste the remote control receiver to the dashboard.
1 Remove the paper from double-stick tape
and paste it on the back of the remote control receiver.
Remote control receiver 4
2 Wipe the dirt and oil off from the installation area
and paste the remote control receiver 6 to the dashboard.
3 Connect the connectors of the remote control
receiver to the main unit.
Wipe oil and dirt off from the installation surface. Avoid area where there is direct sunlight or close to TV monitor because the remote control signals may be affected.

Inserting Pay Card

Insert the Pay Card into the card slot, and attach the card slot cover.
Screw (M34mm) 8 Card Slot Cover 7 Digital TV Tuner 1

Connection

Connect the monitor and power as follows.
Set S position when connecting by AV Cable (RCA).
Set C position when connecting by Kenwood TV Interface Cable.
To AV input of the monitor Digital TV Tuner 1 Ground wire (Black) - (To car chassis)
Fuse (5A) Battery wire (Yellow)
Fuse (3A) Ignition wire (Red)
To the center unit such as a DVD receiver.
75 F connector For VHF/UHF

Wiring harness 3

Connection of antenna with booster amplifier Set "0/5 Volt" ON when connecting an antenna with booster amplifier to this unit.

TV Interface Cable 5

Ignition key switch ACC

Car fuse box (Main fuse)

Car fuse box

Battery +

Specifications

TV tuner

Input Frequency VHF : MHz UHF : MHz Demodulation Type : QPSK/ 64QAM/ 16QAM Channel Bandwidth : 6/ 7/ 8 MHz FFT Size : 2K and 8K Guard Interval : 1/4, 1/8, 1/16, 1/32 Puncture Rate : 1/2, 2/3, 3/4, 5/6, 7/8 Antenna input : 2-ch Diversity Connector Type : F Type 2

General

Operating Voltage (11 16V) : 14.4 V Current Consumption : 860 mA Dimensions (W H D) (Main unit) : 172.4 mm Operational temperature range : -10C ~ +60 C Storage temperature range : -30C ~ +85 C Weight : 1.2 kg