Manufacturers Name: Manufacturers Address: Product name:
DECLARATION OF CONFORMITY
DigiTech 8760 S. Sandy Parkway Sandy, Utah 84070, USA

Warning

declares that the product: Product option:
For your protection, please read the following: Important Safety Instructions
1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Do not use this apparatus near water. 5. Clean only with dry cloth. 6. Do not block any ventilation openings. Install in conforms to the following Product Specifications: accordance with the manufacturers instructions. Safety: IEC 60065 (1998) 7. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including EMC: EN 55013 (1990) amplifiers) that produce heat. EN 55020 (1991) 8. Protect the power cord from being walked on or Supplementary Information: pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. The product herewith complies with the requirements of the Low Voltage Directive 73/23/EEC and the EMC Directive 89/336/EEC 9. Unplug this apparatus during lightning storms or when as amended by Directive 93/68/EEC. unused for long periods of time. 10. No user serviceable parts inside. Refer all servicing to Vice-President of Engineering - MI qualified service personnel. Servicing is required when 8760 S. Sandy Parkway Sandy, Utah 84070, USA the apparatus has been damaged in any way, such as Date: December 13, 2004 power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the European Contact: Your local DigiTech Sales and Service Office or apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. Harman Music Group 11.WARNING:To reduce the risk of fire or electric shock, 8760 South Sandy Parkway do not expose this apparatus to rain or moisture. Sandy, Utah, 84070 USA Ph: (801) 566-8800 12. Refer to labels on the unit, including bottom cover, or Fax: (801) 568-7583 other markings and pertinent information.
all (requires Class II power adapter that conforms to the requirements of EN60065, EN60742, or equivalent.)

DF-7 Distortion Factory

Distortion pedals are as important to the world of guitar playing as guitar playing is to modern music, and the DigiTech DF-7 Distortion Factory is the most advanced distortion pedal ever created.Weve modeled seven of the most popular distortion stompboxes of all time and packed them into one pedal equipped with our new, powerful Flexible Output Mode with selectable Stereo Spectrum Technology.
Congratulations and special thanks from DigiTech for choosing the DF-7 Distortion Factory Pedal.
*DigiTech, DOD, Metal Master, Flexible Output Mode and CIT are trademarks of Harman International Industries, Incorporated. Other product names used in this document are trademarks of their respective companies and are not associated or affiliated with DigiTech.They are trademarks of other manufacturers and were used merely to identify products whose sounds were reviewed in the creation of this product.
The DF-7 is designed to give you the tonal nuances, drive, and vibe reminiscent of the Ibanez TS-9*, DOD Overdrive/Preamp 250, Boss DS-1*, Pro Co Rat*, Boss MT-2 Metal Zone*, DigiTech Metal Master, and Electro-Harmonix Big Muff *.The DF-7 also features Flexible Output Mode with a choice of six stereo spectrums and the acclaimed CIT cabinet modeling technology.This gives you the flexibility to run either directly into a mixer or recording device utilizing the DF-7s cabinet models or amps in either stereo with 6 spectrum choices or mono.
The DigiTech DF-7 Distortion Factory includes the following items:

Included Items

Specifications
This Owners Manual Battery Notice
DigiTech DF-7 Distortion Factory Pedal
Please make sure that all of these items have been included before you get started.

DigiTech Brochure

DigiTech Warranty Card
Controls - LEVEL, LOW, MID FREQ, MID, GAIN, HIGH, DISTORTION MODEL, On/Off Pedal Jacks - INPUT, OUT 1 (AMP), OUT 2 (MIXER) Input Impedance - 1 MOhms Output Impedance - 100 Ohms Power Supply - (Optional) DigiTech PS200R or 9V Alkaline Dry Battery Power Consumption - 4.8 Watts (w/optional PS200R power supply) Battery Life - Approximately 4 hours (with continuous usage) Dimensions - 4 15/16"(L) x 3 1/8"(W) x 2 1/8"(H) Weight - 2 lbs. (Optional) Power Supply PS200R - 100 (100V ~ 50/60Hz) PS200R - 120 (120V ~ 60Hz) PS200R - 230 (230V ~ 50Hz) PS200R - 240 (240V ~ 60Hz)

Battery Replacement Directions
1. Using the tip of a 1/4" guitar cable, push one of the release pins in on either side of the pedal, and remove the pedal from the pedal chassis. 2. Remove the battery from the battery compartment and disconnect the battery cable.
Battery Replacement Diagram
3. Connect a new battery to the battery cable and put it back in the battery compartment. Make sure the battery cable does not interfere with the spring or pedal switch arm. 4. Place one hole of the pedal over its corresponding pin.
5. Push the opposite pin in and lower the other side of the pedal into place over the depressed pin. Release the pin.When the pedal is properly fastened, both release pins are flush with the outer side of the pedal.

Feature Diagram

1. LEVEL Controls the output level of the effect.Turn this knob clockwise to increase the output level, and counter-clockwise to decrease the output level.
2. LOW Controls each MODELs low frequency boost or cut. 3. MID FREQ Adjusts each MODELs midrange center frequency.The range is from 200Hz to 5kHz. 4. MID Controls each MODELs midrange frequency boost or cut.
5. Power Supply Jack Connect only the DigiTech PS200R
6. HIGH Controls each MODELs high frequency boost or cut except for the models based on the TS-9*, DS-1*, Big Muff *, and Rat*. For the TS-9*, DS-1*, and Big Muff * models, this knob acts as a Tone control. For the Rat* model, this knob acts as a Filter control. 7. GAIN Controls each MODELs distortion/overdrive gain except for the model based on the Big Muff * where it acts as a Sustain control. Turn this knob clockwise to increase the gain, and counter-clockwise to decrease the level.
(9V DC) power supply to this jack. (Refer to Flexible Output Mode in Connections section.)
8. DISTORTION MODEL Selects one of the following seven distortion pedal models:
1. Based on the Ibanez TS-9* 2. Based on the DOD Overdrive/Preamp 250 3. Based on the Boss DS-1 Distortion* 4. Based on the Pro Co Rat* 5. Based on the Boss MT-2 Metal Zone* 6. Based on the DigiTech Metal Master 7. Based on the Electro-Harmonix Big Muff * Please refer to the Model Descriptions section on the
following pages for more information 11. Pedal regarding each model and the Press the pedal to turn the effect Stereo Spectrum Set-up on and off. (See Flexible Output section for spectrum selection. Mode and Stereo Spectrum Set-up sections.) 9. INPUT Connect your instrument to this jack. 12. OUT 1 (AMP) Connecting a guitar cable to this jack Connect this output jack to your supplies battery power even though guitar amplifier. (See Flexible the Indicator LED may not be lit. (See Output Mode and Stereo Flexible Output Mode Spectrum Set-up sections.) section.) To prolong battery life, disconnect all cables when not in 13. Indicator LED use. This LED indicates when the effect is turned on which Flexible Output 10. Pedal Release Pins Mode is engaged. (See the These two pins are spring-loaded Flexible Output Mode and hinges that hold the pedal in place. Stereo Spectrum Set-up Push these pins in to release the sections.) If the LED becomes dim pedal from the pedal chassis or does not light when using exposing the battery compartment. battery power (with the cables (See the Battery Replacement connected), the battery needs to Diagram.) be replaced.

14. OUT 2 (MIXER) This output has been specifically designed for use with a full range audio system. It is designed to be plugged directly into a mixer or recording device for optimal performance. Each MODEL features a specific cabinet model when using this output. (See Flexible Output Mode and Stereo Spectrum Set-up sections.)
Distortion Model Descriptions
DISTORTION MODEL 1 Based on the Ibanez TS-9 Tube Screamer*
For this model, the DF-7s GAIN, HIGH, and LEVEL knobs function like the TS-9*s Overdrive,Tone, and Level controls, respectively.The DF-7 also features separate LOW, MID, and MID FREQ controls giving you added EQ flexibility so you can customize the model to suit you taste. Set the DF-7s LOW, MID, MID FREQ, HIGH, and GAIN knobs to the 12 OClock position to accurately reproduce this pedal model.
overdrive sound. It is ideal for boosting your signal without adding a lot of distortion.
This model recreates the vibe of the Ibanez TS-9 Tube Screamer*, famous for delivering a warm, natural tube
When this model is selected, the CIT cabinet model used in Flexible Output Modes 1 and 2 is based on
a Fender 65 Deluxe Reverb* 1x12 cabinet. DISTORTION MODEL 2 Based on the DOD Overdrive/Preamp 250
DISTORTION MODEL 3 Based on the Boss For this model, the DF-7s GAIN and DS-1 Distortion* LEVEL knobs function like the DOD 250s Gain and Level controls, This model was inspired by the Boss respectively.The DF-7 also features DS-1 Distortion* pedal. It is great for separate LOW, MID, MID FREQ, adding distortion tone to your guitar
This model reproduces the classic tone of the DOD Overdrive/Preamp 250. It delivers a punchy overdrive effect typical of the legendary guitar sounds of the mid-seventies. MODEL 2 is great for pushing the front end of your tube amps and is a key element of many players tone.
and HIGH controls giving you added EQ flexibility so you can customize the model to your desired taste. Set the DF-7s LOW, MID, MID FREQ, HIGH, and GAIN knobs to the 12 OClock position to accurately reproduce this pedal model. When this model is selected, the CIT cabinet model used in Flexible Output Modes 1 and 2 is based on a Marshall* 4x12 cabinet.
For this model, the DF-7s GAIN, HIGH, and LEVEL knobs function like the DS-1s* Distortion,Tone, and Level controls, respectively.The DF-7 also features separate LOW, MID, and MID FREQ controls giving you added EQ flexibility so you can customize the model to suit your taste. Set the DF-7s LOW, MID, MID FREQ, HIGH, and GAIN knobs to the 12 OClock position to accurately reproduce this pedal model.
signal while maintaining the dynamic nuances of your playing.

DISTORTION MODEL 4 Based on the Pro Co Rat*
This model was fashioned to recreate the sonic boom of the Pro Co Rat* pedal. It offers you the perfect blend of distortion with sustain and cutting power. Use this model to get a harmonically rich tone with an aggressive edge.
When this model is selected, the CIT cabinet model used in Flexible Output Modes 1 and 2 is based on a Johnson* 4x12 cabinet.
For this model, the DF-7s GAIN, HIGH, and LEVEL knobs function like the Rats* Distortion, Filter, and Volume controls, respectively.The DF7 also features separate LOW, MID, and MID FREQ controls giving you added EQ flexibility so you can customize the model to suit your taste. Set the DF-7s LOW, MID, MID
When this model is selected, the CIT cabinet model used in Flexible Output Modes 1 and 2 is based on a Fender* Bassman* 2x12 cabinet. DISTORTION MODEL 5 Based on the Boss MT-2 Metal Zone*
FREQ, HIGH, and GAIN knobs to the 12 OClock position to accurately reproduce this pedal model.
LOW, MID, MID FREQ, HIGH, and GAIN knobs function like the MT2s* Level, Low, Mid Freq, Middle, High and Distortion controls, respectively. Set the DF-7s LOW, MID, MID FREQ, HIGH, and GAIN knobs to the 12 OClock position to accurately reproduce this pedal model.
This model recreates the over-the-top distortion of the Boss MT-2 Metal Zone* pedal. It will add sustain and body to your sound while juicing up your mids and lows like a full stack. For this model, the DF-7s LEVEL,
When this model is selected, the CIT cabinet model used in Flexible Output Modes 1 and 2 is based on a Johnson* 4x12 cabinet. DISTORTION MODEL 6 Based on the DigiTech Metal Master*
This model is based on DigiTechs
For this model, the DF-7s LEVEL, LOW, and HIGH knobs function like the Metal Masters Level, Low, and Hi controls, respectively. The DF-7 also features separate MID, MID FREQ, and GAIN controls giving you added EQ and Gain flexibility so you can customize the model to suit your taste. Set the DF-7s LOW, MID, MID FREQ, and HIGH knobs to the 12 OClock position and the GAIN knob
highly-acclaimed Metal Master pedal. We modeled the Metal Master with its Morph knob set to the minimum position.This model gives you a sweet singing solo tone with plenty of midrange to cut through any mix and beautifully controllable feedback for hanging on to those key notes.
When this model is selected, the CIT cabinet model used in Flexible Output Modes 1 and 2 is based on a VHT* 4x12 cabinet. DISTORTION MODEL 7 Based on the ElectroHarmonix Big Muff *
fully clockwise to accurately reproduce this pedal model.

This model is designed to capture the essence of the Electro Harmonix Big Muff *. It will give you rich, creamy fuzz distortion with violin-like sustain.
For this model, the DF-7s LEVEL, GAIN, and HIGH knobs function like the Big Muff *s Volume, Sustain, and
Set the DF-7s LOW, MID, MID FREQ, HIGH, and GAIN knobs to the 12 OClock position to accurately reproduce this pedal model.
Tone controls, respectively. The DF-7 also features separate LOW, MID, and MID FREQ controls giving you added EQ flexibility so you can customize the model to suit your taste.
When this model is selected, the CIT cabinet model used in Flexible Output Modes 1 and 2 is based on a Marshall* 4x12 cabinet w/25 watt Celestion* Greenback* speakers.
The DF-7 not only sounds great plugged into a single amp or mixer channel, there are also two additional output modes that can be selected during power up.These output modes reconfigure the OUT 1 (AMP) and OUT 2 (MIXER) outputs into stereo outputs that can be plugged into either two amps or into two channels of a mixer or recording device. Using either of these modes you can access six distinctively different stereo spectrums creating stereo imagery from narrow to double wide.

Flexible Output Mode

The DF-7 Distortion Factory is equipped with a single INPUT and a highly powerful set of outputs that can be connected to both an amplifier OUT 1 (AMP) and a mixer OUT 2 (MIXER) simultaneously or configured so both OUTs can be connected to two mixer channels (Mode 2 stereo) or to two amps (Mode 3 stereo).

Connections

Flexible Output Mode Operations
Flexible Output Mode Mode One Mode Two 1 Flash LED

Mode Three

2 Flashes Mixer CIT Stereo 3 Flashes Amp Stereo

Amp Mono

Mixer CIT Mono Amp Stereo

Mixer CIT Stereo

Mode One: Single Amp and Single Mixer Out - Mono (default) (ONE FLASH)

Power Supply (optional)

Changes made to Flexible Output Mode and Stereo Spectrum are saved even after the DF-7 is turned off. Mode One does not utilize Stereo Spectrum.

Mode One: Single Amp and Single Mixer Out - Mono (default) (ONE FLASH) Battery Power Use: 1. Press and hold the pedal switch. Power Supply Use: 1. Press and hold the pedal switch.
2. Insert a 1/4" guitar cable into the input.The LED will light solid for approximately one second and then turn off.
3. While holding the pedal switch, wait for the Indicator LED to flash once.
2. Connect the power supply to the power jack on the rear of the pedal chassis.The indicator LED will light solid for approximately one second and then turn off.
4. Release the pedal switch. (Continuing to hold the pedal switch will cycle through one, two, and three flashes.)
Mode Two: Dual Mixer Out - Stereo (TWO FLASHES)
Both OUT 1 (AMP) and OUT 2 (MIXER) can be CIT enabled on each output and configured for stereo use with two mixer/recorder channels.
Mode Two: Dual Mixer Out - Stereo (TWO FLASHES) Battery Power Use: 1. Press and hold the pedal switch. Power Supply Use: 1. Press and hold the pedal switch.
3. While holding the pedal switch, wait for the Indicator LED to flash twice.
Note: Refer to the Stereo Spectrum section for Mode 2 Stereo Spectrum selection.
Mode Three: Dual Amp Out - Stereo (THREE FLASHES)
Both OUT 1 (AMP) and OUT 2 (MIXER) can be configured for stereo use with two amplifiers
Mode Three: Dual Amp Out - Stereo - (THREE FLASHES) Battery Power Use: 1. Press and hold the pedal switch. Power Supply Use: 1. Press and hold the pedal switch.
3. While holding the pedal switch, wait for the Indicator LED to flash three times.
Note: Refer to the Stereo Spectrum Selection section for Mode 3 Stereo Spectrum selection.
Stereo Spectrum Selection In addition to having the two stereo output modes (Mode 2 and Mode 3), the DF-7 also has six different stereo spectrums to choose from when using Mode 2 or Mode 3.To activate the stereo spectrums, follow the steps in the Stereo Spectrum Setup section and choose a stereo spectrum with the DISTORTION MODEL knob. Note: The DF-7 must be in Mode 2 or Mode 3 to activate Stereo Spectrum Mode. Changes made to Flexible Output Mode and Stereo Spectrum are saved even after the DF7 is turned off. Mode One does not utilize Stereo Spectrum.

Stereo Spectrum Set-Up:

1. Press and hold the Pedal Switch for 5 seconds.The Indicator LED will flash twice if the DF-7 is in Mode 2, or three times if the DF-7 is in Mode 3.
2.While the indicator LED is flashing, turn the DISTORTION MODEL knob to select a Stereo Spectrum. Setting 1 is no spectrum; setting 2 is the narrowest spectrum; settings 3-6 are progressively wider; setting 7 is the widest spectrum. 3. Once youve selected a spectrum, press the Pedal Switch.The Indicator LED will stop flashing and the spec trum will be active. 4. Select the desired Distortion Model with the DISTORTION MODEL knob.

WARRANTY: We at DigiTech are proud of our products and back-up each one with the following warranty: 1.The warranty registration card must be mailed within ten days after purchase date to validate this warranty. 2. DigiTech warrants this product, when used solely within the U.S., to be free from defects in materials and workmanship under normal use and service.
4. Proof-of-purchase is considered to be the burden of the consumer.
3. DigiTech liability under this warranty is limited to repairing or replacing defective materials that show evidence of defect, provided the product is returned to DigiTech WITH RETURN AUTHORIZATION, where all parts and labor will be covered up to a period of one year (this warranty is extended to a period of six years when the product has been properly registered by mail or through our website). A Return Authorization number may be obtained from DigiTech by telephone. The company shall not be liable for any consequential damage as a result of the product's use in any circuit or assembly.
5. DigiTech reserves the right to make changes in design, or make additions to, or improvements upon this product without incurring any obligation to install the same on products previously manufactured. 6.The consumer forfeits the benefits of this warranty if the product's main assembly is opened and tampered with by anyone other than a certified DigiTech technician or, if the product is used with AC voltages outside of the range suggested by the manufacturer.
NOTE:The information contained in this manual is subject to change at any time without notification. Some information contained in this manual may also be inaccurate due to undocumented changes in the product or operating system since this version of the manual was completed. The information contained in this version of the owner's manual supersedes all previous versions.
7.The foregoing is in lieu of all other warranties, expressed or implied, and DigiTech neither assumes nor authorizes any person to assume any obligation or liability in connection with the sale of this product. In no event shall DigiTech or its dealers be liable for special or consequential damages or from any delay in the performance of this warranty due to causes beyond their control.
DigiTech 8760 South Sandy Parkway Sandy, Utah 84070 PH (801) 566-8800 FAX (801) 566-7005 www.digitech.com
Printed 2/2005 DF-7 Distortion Factory Owners Manual 18-1843-A

Manufactured in the USA

*Other product names used in this document are trademarks of their respective companies and are not associated or affiliated with DigiTech.They are trademarks of other manufacturers and were used merely to identify products whose sounds were reviewed in the creation of this product.
DigiTech, DOD, DF-7 Distortion Factory, Flexible Output Mode and CIT are trademarks of Harman International Industries Incorporated.