Choose the drivers properties as follows:

(Windows XP/Server 2003)

From the Start menu, choose Printers and Faxes to display the Printers and Faxes directory. Right-click the KONICA MINOLTA magicolor 5440DL printer icon and choose Printing Preferences.

(Windows 2000)

From the Start menu, choose Settings and then Printers to display the Printers directory. Right-click the KONICA MINOLTA magicolor 5440DL printer icon and choose Printing Preferences.

(Windows Me/98SE)

From the Start menu, choose Settings and then Printers to display the Printers directory. Right-click the KONICA MINOLTA magicolor 5440DL printer icon and choose Properties. Choose Printer Properties.

(Windows NT 4.0)

From the Start menu, choose Settings and then Printers to display the Printers directory. Right-click the KONICA MINOLTA magicolor 5440DL printer icon and choose Document Defaults. If you have installed options, proceed with the next step. Otherwise, skip to step 8. Select the Device Options Setting tab. Check that the options have been correctly identified. Since Auto configure is selected as a default with the driver, installed options are automatically identified. If, for some reason, the options are not correctly identified, follow the operations described in steps 5 through 7.
Clear the Auto configure check box. Select an option (one at a time) and click Add. The option moves to the Installed Options list. If you accidentally add an uninstalled option, select the option in the Installed Options list and then click Remove.
Click Apply. Depending on the version of the operating system, Apply may not appear. If this is the case, continue with the next step.
Select the Paper tab. Select the default settings for your printer, such as the default media format you use. Click Apply. Click OK to exit from the Properties dialog box.
Uninstalling the Printer Driver (for Windows)
This section describes how to uninstall the magicolor 5440 DL printer driver if necessary.
From the Start menu, choose Programs (Windows XP/Server 2003: All Programs), KONICA MINOLTA, magicolor 5440DL, and then Uninstall. In the Uninstall window, select the KONICA MINOLTA magicolor 5440DL. Then click Uninstall. The magicolor 5440 DL driver will be uninstalled from your computer. When using Windows 98SE, restart the computer after uninstalling the printer driver.
Displaying Printer Driver Settings (for Windows)

Windows XP/Server 2003

Windows 2000/Me/98SE/NT 4.0
From the Start menu, point to Settings, and then click Printers to display the Printers directory. Display the printer driver settings: # Windows 2000Right-click the KONICA MINOLTA magicolor 5440DL printer icon and choose Printing Preferences. # Windows Me/98SERight-click the magicolor 5440DL printer icon and choose Properties, then select Printer Properties. # Windows NT 4.0Right-click the KONICA MINOLTA magicolor 5440DL printer icon and choose Document Defaults.

For a local printer, the type (USB) is displayed. For a network printer, the IP address is displayed.
# StatusDisplays the printer status. The same information for Printer Status in the Status Display is displayed.
# Supply Status: C,M,Y,K %RemainingDisplays (as a percentage) the
approximate amount of toner remaining in the cartridges. The listed values are, from the left: C (cyan), M (magenta), Y (yellow) and K (black).
Click the heading of each column to switch the order between descending and ascending.

Action Menu

# Update PrintersSearches again for the printers on the network. # Network PrintersAllows the IP address of network printers to be added

or removed.

# Options
Status Monitor Application for Network Printers Specify whether Status Display or PageScope Web Connection appears when the name of the printer in the screen is double-clicked. The default setting is Status Display. This setting only applies to network printers. Two timeout intervals can be specified. # Printer Detection Timeout # Printer Status Query Timeout

Timeout

Recognizing Printer Status Monitor Center Alerts
If a red or yellow icon appears, open Status Display or PageScope Web Connection, and then check the detailed information. For details on Status Display, refer to Working with the Status Display on page 14. For details on PageScope Web Connection, refer to the magicolor 5440 DL Reference Guide.
Closing the Printer Status Monitor Center
To close Printer Status Monitor Center, choose Exit from the Action menu, or click the X button in upper-right corner of the Printer Status Monitor Center window.
Printer Control Panel and Configuration Menu

About the Control Panel

The control panel, located on the top of the printer, allows you to direct the printers operation. In addition, it displays the current status of the printer, including any condition that needs your attention.

MESSAGE WINDOW

Control Panel Indicators and Keys

# Mixed with any other media in the manual feed tray (as this will cause

printer misfeeding)

Envelopes
Print on the front (address) side only. Some parts of the envelope consist of three layers of paperthe front, back, and flap. Anything printed in these layered regions may be lost or faded. Tray 1/2/3 Not supported Manual Feed Up to 10 envelopes, depending on their Tray thickness Orientation Face down Driver Envelope Media Type Weight 91163 g/m (2543 lb bond) Duplexing Not supported Use envelopes that are Capacity
# Common office envelopes approved for laser printing with diagonal joints,
sharp folds and edges, and ordinary gummed flaps
Because the envelopes pass through heated rollers, the gummed area on the flaps may seal. Using envelopes with emulsion-based glue avoids this problem.
# Approved for laser printing
DO NOT use envelopes that have
# Sticky flaps # Tape seals, metal clasps, paper clips, fasteners, or peel-off strips for sealing
# Transparent windows # Too rough of a surface # Material that will melt, vaporize, offset, discolor, or emit dangerous fumes # Been presealed

Labels

A sheet of labels consists of a face sheet (the printing surface), adhesive, and a carrier sheet:
# The face sheet must follow the plain paper specification. # The face sheet surface must cover the entire carrier sheet, and no adhesive should come through on the surface. You can print continuously with label sheets. However, this could affect the media feed, depending on the media quality and printing environment. If problems occur, stop the continuous printing and print one sheet at a time. Try printing your data on a sheet of plain paper first to check placement. Check your application documentation for more information on printing labels. Capacity Tray 1/2/3 Not supported Manual Feed Up to 20 label sheets, depending on their Tray thickness Orientation Face down Driver Labels Media Type Weight 60163 g/m (1643 lb bond) Duplexing Not supported Use label sheets that are
# Recommended for laser printers # Letter or A4 size (adhesive label stock)
DO NOT use label sheets that
# Have labels that easily peel off or have parts of the label already removed # Have backing sheets that have peeled away or have exposed adhesive
Labels may stick to the fuser, causing them to peel off and media misfeeds to occur.

Up to 20 sheets can be loaded into the tray at one time.
Slide the media guides against the edges of the media.

Duplexing

Select paper with high opacity for duplex (2-sided) printing. Opacity refers to how effectively paper blocks out what is written on the opposite side of the page. If the paper has low opacity (high translucency), then the printed data from one side of the page will show through to the other side. Check your application for margin information. For best results, print a small quantity to make sure the opacity is acceptable. Duplex (2-sided) printing can be done manually or can be done automatically with the duplex option installed and selected.
Only plain paper, 6090 g/m2 (1624 lb bond) can be autoduplexed. See Media Specifications on page 38. Duplexing envelopes, labels, postcards, thick stock, glossy stock or transparencies is not supported.

How do I autoduplex?

You should verify that the duplex option is physically installed on the printer to successfully duplex the job. If the duplex option is not installed and duplex job is sent, the control panel will display DUPLEX OPTION NOT ATTACHED. Check your application to determine how to set your margins for duplex printing. The following Duplex/Booklet settings are available. If Short Edge Binding is selected, the pages will be laid out to flip at the top.
If Long Edge Binding is selected, the pages will be laid out to flip at the side.
If Booklet Left Binding is selected, the pages can be folded as a left-bound booklet.
If Booklet Right Binding is selected, the pages can be folded as a right-bound booklet.
Load plain paper into the tray. From the printer driver, specify the layout for duplex printing. Click OK.
With autoduplexing, the back side is printed first, and then the front side is printed.

Output Tray

All printed media is output to the face-down output tray on top of the printer. This tray has a capacity of approximately 250 sheets (A4/Letter) of 80 g/m2 (22 lb) paper.
If the media is stacked too high in the output tray, your printer may experience media misfeeds, excessive media curl, or static buildup. Remove transparencies as soon as possible from the output tray to avoid static buildup.

Media Storage

How do I store media?
# Keep media on a flat, level surface in its original wrapper until it is time to
load it. Media that has been stored for a long time out of its packaging may dry up too much and cause misfeeding.
# If media has been removed from its wrapper, place it in its original packaging and store in a cool, dark place on a level surface.
# Avoid moisture, excessive humidity, direct sunlight, excessive heat (above

35C [95F]), and dust.

Printer Type Printer Parts Number Toner Cartridge Type Standard-Capacity Toner Cartridge -Black (K) Standard-Capacity Toner Cartridge -Yellow (Y) Toner Cartridge Parts Number 1710580-001 1710580-002
Standard-Capacity Toner Cartridge -Magenta (M) 1710580-003 AM 5250224-100 Standard-Capacity Toner Cartridge -Cyan (C) High-Capacity Toner Cartridge -Black (K) High-Capacity Toner Cartridge -Yellow (Y) High-Capacity Toner Cartridge -Magenta (M) High-Capacity Toner Cartridge -Cyan (C) Standard-Capacity Toner Cartridge -Black (K) Standard-Capacity Toner Cartridge -Yellow (Y) 1710580-004 1710602-005 1710602-006 1710602-007 1710602-008 1710604-001 1710604-002
Standard-Capacity Toner Cartridge -Magenta (M) 1710604-003 EU 5250224-200 5250218-400 Standard-Capacity Toner Cartridge -Cyan (C) High-Capacity Toner Cartridge -Black (K) High-Capacity Toner Cartridge -Yellow (Y) High-Capacity Toner Cartridge -Magenta (M) High-Capacity Toner Cartridge -Cyan (C) Standard-Capacity Toner Cartridge -Black (K) Standard-Capacity Toner Cartridge -Yellow (Y) 1710604-004 1710604-005 1710604-006 1710604-007 1710604-008 1710583-001 1710583-002
Standard-Capacity Toner Cartridge -Magenta (M) 1710583-003 AP 5250224-350 Standard-Capacity Toner Cartridge -Cyan (C) High-Capacity Toner Cartridge -Black (K) High-Capacity Toner Cartridge -Yellow (Y) High-Capacity Toner Cartridge -Magenta (M) High-Capacity Toner Cartridge -Cyan (C) Standard-Capacity Toner Cartridge -Black (K) Standard-Capacity Toner Cartridge -Yellow (Y) 1710583-004 1710605-005 1710605-006 1710605-007 1710605-008 1710581-001 1710581-002
Standard-Capacity Toner Cartridge -Magenta (M) 1710581-003 JP 5250224-300 Standard-Capacity Toner Cartridge -Cyan (C) High-Capacity Toner Cartridge -Black (K) High-Capacity Toner Cartridge -Yellow (Y) High-Capacity Toner Cartridge -Magenta (M) High-Capacity Toner Cartridge -Cyan (C) 1710581-004 1710603-005 1710603-006 1710603-007 1710603-008
Do not touch the OPC drum surface. This could lower image quality.

Keep toner cartridges:

# In their packaging until youre ready to install them. # In a cool, dry location away from sunlight (due to heat).
The maximum storage temperature is 35 C (95 F) and the maximum storage humidity is 85% (noncondensing). If the toner cartridge is moved from a cold place to a warm, humid place, condensation may occur, degrading print quality. Allow the toner to adapt to the environment for about one hour before use.
# Level during handling storage.
Do not hold, stand or store cartridges on their ends or turn them upside down; the toner inside the cartridges may become caked or unequally distributed.
# Away from salty air and corrosive gases such as aerosols.
Replacing a Toner Cartridge Note
Be careful not to spill toner while replacing a toner cartridge. If toner spills, immediately wipe it off with a soft, dry cloth. If TONER EMPTY on the ENGINE/TONER EMPTY menu is set to STOP, the message REPLACE TONER X (where X represents the color of the toner) appears when a toner cartridge becomes empty. Follow the steps below to replace the toner cartridge. As an example, the following procedure describes the operation for the yellow toner cartridge.
If TONER EMPTY on the ENGINE/TONER EMPTY menu is set to CONTINUE, the message TONER EMPTY X appears.
Check the message window to see which color of toner is empty. Open the printers front cover.
Press down the area marked Push on the toner cartridge to be replaced, and then slide the cartridge out until the handle is visible.
Grasp the handle as shown in the illustration, and then slide the cartridge all the way out of the printer.
Dispose of the used toner cartridge according to your local regulations. Do not burn the toner cartridge. For detailes, refer to About Toner Cartridges on page 66.
Check the color of the new toner cartridge to be installed.
Shake the cartridge a few times to distribute the toner.
Make sure that the OPC drum cover is securely attached before shaking the cartridge.
Lift the OPC drum cover on the toner cartridge toward you.
Slide the OPC drum cover off of the toner cartridge.
Holding the toner cartridge by its handle, slide the cartridge into the printer.
Lower the handle, and then slide the cartridge the rest of the way into the printer until it locks into place.
Remove the protective film from the toner cartridge by slowly pulling it straight out.

Close the front cover.

# Avoid using abrasive or corrosive solutions or solutions that contain solvents (such as alcohol and benzene) to clean the printer.
# Always test any cleaning solution (such as mild detergent) on a small
inconspicuous area of your printer to check the solutions performance.
# Never use sharp or rough implements, such as wire or plastic cleaning
# Always close the printers covers gently. Never subject the printer to vibration.
# Do not cover the printer immediately after using it. Turn it off and wait until

it cools down.

# Do not leave the printers covers open for any length of time, especially in
well-lit places; light may damage the toner cartridges.
# Do not open the printer during printing. # Do not tap media stacks on the printer. # Do not lubricate or disassemble the printer. # Do not tilt the printer. # Do not touch the electrical contacts, gears, or laser devices. Doing so
may damage the printer and cause the print quality to deteriorate.
# Keep media in the output tray at a minimum level. If the media is stocked
too high, your printer may experience media misfeeds and excessive media curl.
# Make sure two people are available to lift the printer when moving it. Keep the printer level to avoid toner spillage.
# When lifting the printer, fold up
the manual feed tray, and then lift the printer as shown in the illustration at the right. Even if an optional lower feeder unit is installed, be sure to lift the printer as shown below. Do not grasp the grip of Tray 2, Tray 3 or the right side cover; otherwise, the lower feeder unit may be damaged. Front
# If you get toner on your skin, wash it off with cool water and a mild soap.
# Make sure any parts removed during cleaning are replaced before you

plug in the printer.

Cleaning the Printer
Be sure to turn off the printer and unplug the power cord before cleaning.

Exterior

Control Panel Ventilation Grill

Printer Exterior

Media Rollers
The accumulation of paper dust and other debris on the media rollers can cause media-feeding problems.
Cleaning the Media Feed Rollers (All Trays)

Pull out the tray.

Clean the media feed rollers by wiping them with a soft, dry cloth.

Close the tray.

Cleaning the Duplex Option Feed Rollers

Open the duplex cover.

Clean the feed rollers by wiping them with a soft, dry cloth.

Close the duplex cover.

Cleaning the Media Transfer Rollers for Tray 2 and 3
Open the right side cover of Tray 2 (Tray 3).
Before opening the right side cover of Tray 2 (Tray 3), fold up the manual feed tray.
Clean the media transfer rollers by wiping them with a soft, dry cloth.
Close the right side cover of Tray 2 (Tray 3).

Cleaning the Laser Lens

This printer is constructed with four laser lenses. Clean all lenses as described below.
Align the marks at the bottom of the toner cartridge, insert the laser lens cleaning tool between the waste toner bottle and the yellow toner cartridge with the cleaning pad pointing down, and then slide it back and forth 2 or 3 times. Clean between each of the toner cartridges in the same way. The laser lens cleaning tool is included with the printer. Safely store the laser lens cleaning tool so that it will not be lost.

Troubleshooting

This chapter provides information to aid you in resolving printer problems you may encounter, or at least guide you to the proper sources for help. Printing the configuration page Preventing media misfeeds Understanding the media path Clearing media misfeeds Solving problems with media misfeeds Solving other problems Solving problems with printing quality Status, error, and service messages Page 96 Page 97 Page 98 Page 99 Page 113 Page 116 Page 121 Page 127
Printing the Configuration Page
Print the configuration (CONFIG) page to verify the printer is printing correctly, or to check the printer configuration. Press Key (once) Until Display Reads READY SPECIAL PAGES

PRINT CONFIG PAGE

The configuration page prints and the printer goes back to READY.
Preventing Media Misfeeds
Make sure that. Media matches the printer specifications. Media is flat, especially on the leading edge. The printer is on a hard, flat, level surface. You store media in a dry location away from moisture and humidity. You remove transparencies from the output tray immediately after printing to avoid static buildup. You always adjust the media guides in the tray after inserting the media (a guide that is not properly adjusted can cause poor print quality, media misfeeds, and printer damage). You load the media printing-side up in the tray (many manufacturers place an arrow on the end of the wrapper to indicate the printing side). Avoid. Media that is folded, wrinkled, or excessively curled. Double feeding (remove the media and fan the sheetsthey may be sticking together). Fanning transparencies since this causes static. Loading more than one type/size/weight of media in a tray at the same time. Overfilling the trays. Allowing the output tray to overfill (the output tray has a 250-sheet capacity misfeeding may occur if you allow more than 250 sheets of media to accumulate at one time). Allowing the output tray to fill with more than a few transparencies.

Understanding the Media Path
Understanding the printers media path will help you locate media misfeeds. 1 Output tray 2 Toner cartridge 3 Transfer belt unit 4 Laser 5 Tray Tray 2 (optional) 7 Tray 3 (optional) 8 Manual feed tray 9 Duplex option 10 Fuser unit

Clearing Media Misfeeds

To avoid damage, always remove misfed media gently, without tearing it. Any piece of media left in the printer, whether large or small, can obstruct the media path and cause further misfeeds. Do not reload media that has misfed.
The image is not fixed on the media before the fusing process. If you touch the printed surface, the toner may stick to your hands, so be careful not to touch the printed face when removing the misfed media. Make sure not to spill any toner inside the printer.
Unfused toner can dirty your hands, clothes, or anything else it gets on. If you accidentally get toner on your clothes, lightly dust them off as best as you can. If some toner remains on your clothes, use cool, not hot water, to rinse the toner off. If toner gets on your skin, wash it off with cool water and a mild soap.
If you get toner in your eyes, wash it out immediately with cool water and consult a doctor. If, after clearing the media misfeed, the misfeed message in the control panel window persists, open and close the printers covers. This should clear the misfeed message.
Media Misfeed Messages and Clearing Procedures
Media Misfeed Message Page Reference Page 100 Page 104 Page 104 Page 106 Page 106 Page 107 Page 110 Page 110
MEDIA JAM TRAY 1 MEDIA JAM TRAY 2 MEDIA JAM TRAY 3 MEDIA JAM DUPLEX LOWER MEDIA JAM DUPLEX UPPER MEDIA JAM FUSER MEDIA JAM MANUAL FEED TRAY MEDIA JAM TRANSFER ROLLER
Clearing a Media Misfeed in Tray 1
Carefully pull out the misfed media.
The area around the fuser unit is extremely hot. Touching anything other than the indicated levers and dials may result in burns. If you get burned, immediately cool the skin under cold water, and then seek professional medical attention.
Decreased print quality may result if the surface of the image transfer belt or the transfer roller is touched. Be careful not to touch the surface of the image transfer belt or transfer roller.
Pull out Tray 1, and then remove all media from the tray.
Fan the media you removed and then align it well.
If transparencies are loaded, do not fan them; otherwise, static electricity may be produced, resulting in another media misfeed.
Load the media face up in Tray 1.
Make sure that the media is flat. Do not load paper above the M mark. Slide the media guides against the edges of the media.

The digital camera is Set the digital camera to the mode for in transfer mode. printing. Printing takes too much time. The printer is set to a slow printing mode (for example, thick stock or transparency). It takes more time to print on special media. When using regular paper, make sure that the media type is set properly in the driver.
The printer is set to It takes time for printing to start in Energy Saver mode. Energy Saver mode. If you do not want to use this mode, disable it. (ENGINE/ SERVICE/ENERGY SAVER menu) The job is very complex. Wait. No action needed.
The printer memory is Add more memory. insufficient. A toner cartridge for a Install a correct KONICA MINOLTA different region or an toner cartridge approved for your speunapproved genuine cific printer. toner cartridge is installed (INCORRECT CART. X is displayed in the message window). Blank pages come out during printing. One or more of the toner cartridges are defective or empty. The wrong media is being used. Check the toner cartridges. The image will not print if one or more cartridges are empty. Check that the media type set in the driver matches the media loaded in the printer.
Symptom Printer returned to
before the configuration menu was changed.
The printer was in the When in the configuration menu strucconfiguration menu ture, select your choice within 2 minstructure without a utes. selection being made within 2 minutes.
Not all pages The printer has the print. wrong kind of cable, or the printer is not configured for the correct cable and port. The Cancel key was pressed. Not all pages The tray is empty. print.

Check your cable.

Make sure no one pressed the Cancel key while your job was printing. Check that the trays are loaded with media, in place, and secure.
A document is printed Print the overlay file using a magicolor with an overlay file 5440 DL driver. which has been created by a non-magicolor 5440 DL driver.
Symptom Printer resets or turns off frequently. You are experiencing duplex problems.
The power cord is not Turn off the printer, confirm that the correctly plugged into power cord is correctly plugged into the the outlet. outlet, and then turn on the printer. A system error occurred. Contact Technical Support with the error information.
Media or settings are For autoduplexing, make sure that you not correct. have a duplex option installed. Make sure that you are using correct media. # See Media Specifications on page 38. # Do not duplex custom-sized media, envelopes, labels, postcards, thick stock, or transparencies. # Make sure that you have not mixed media types in the manual feed tray. Make sure that your document has more than one page. Make sure the duplex option is installed and declared in the Windows printer driver (Device Option Setting tab). In the printer driver (Setup/Duplex/ Booklet), choose Short Edge Binding (flipped as on a clipboard) or Long Edge Binding (flipped as in a loose-leaf notebook). For N-up on duplexed pages, choose Collate only in the drivers Paper Tab. Do not set collation in the application.

ERROR MEMORY OVERFLOW

ERROR VIDEO UNDERRUN
The amount of data to be printed exceeds the printers internal data transmission speed.
Turn the printer off, and then, after a few seconds, turn it on again. Decrease the amount of data to be printed (for example, by decreasing the resolution), and then try printing again.
means. The fuser unit is not installed.
do this. Contact Technical Support with the error information.
FUSER NOT ATTACHED MANUAL FEED TRAY NOT INSTALLED
The manual feed tray Install the manual feed was specified with the tray. printer driver for printing, but the manual feed tray is not installed. Media has misfed in the duplex option. Media has misfed in the duplex option. Media has misfed leaving the fuser area. Media has misfed in the manual feed tray. Media has misfed in the transfer roller area. This type of misfeed means that the media did not make it to the paper exit area. Media has misfed while being pulled from the specified tray (X). A media misfeed After clearing the media occurred because the misfeed, check the driver settings are driver settings. inconsistent. Locate and remove the misfeed.
MEDIA JAM DUPLEX LOWER MEDIA JAM DUPLEX UPPER MEDIA JAM FUSER MEDIA JAM MANUAL FEED TRAY MEDIA JAM TRANSFER ROLLER
MEDIA JAM TRAY X MEDIA JAM UNDEFINED
PUT MEDIA : M-TRAY The media type set in Load the correct media the printer driver is type into the manual MEDIA
different from the type feed tray. of media loaded into the manual feed tray.

means.

do this.
PUT MEDIA : M-TRAY The media size set in Load the correct media the printer driver is size into the manual SIZE
different from the size feed tray. of media loaded.
PUT MEDIA : TRAY X The media size set in Load the correct media the printer driver is size into the specified SIZE
different from the size tray. of media loaded.

REPLACE TONER X

The X toner cartridge Replace the toner caris empty tridge. (Appears when
ENGINE/TONER EMPTY STOP is set). SIZE/TYPE ERROR
Unsupported media (wrong size, thickness, type, etc.) is being used. The media not compatible with duplex printing. Load the correct media size and type.
SIZE/TYPE ERROR DUPLEX TONER LIFE END X
Use the correct media size and type when duplexing.
The X toner cartridge Replace the toner caris completely empty. tridge. (Appears when

X TONER NOT INSTALLED TRAY X NOT ATTACHED
The X toner cartridge Install a correct KONICA is not installed, or an MINOLTA toner carunapproved toner tridge. cartridge is installed. Tray X (Tray 2 or 3) was specified with the printer driver for printing, but Tray X is not installed. The waste toner bottle is full. Stop the print job and change the printer driver setting. If necessary, install Tray X. Install a new waste toner bottle.

WASTE BOTTLE FULL

Service Messages
These messages indicate a more serious fault that can only be corrected by a customer service engineer. If one of these messages appears, turn the printer off, then turn it on again. If the problem persists, contact your local vendor or authorized service provider. This service message. means. AIDC sensor error. do this. Contact Technical Support with the error information. Check that the interface cable is properly connected to the printer. If the error continues to appear even though the cables are correctly connected, contact Technical Support.
ERROR AIDC SENSOR ERROR COMMUNICATION
A communication error occurred in the USB or Ethernet interface.
ERROR CONTROLLER ERROR DIMM
Controller internal error. Contact Technical Support with the error information. SDRAM DIMM error. Contact Technical Support with the error information.
A communication error Contact Technical SupERROR ENGINE INTERFACE occurred with the engine port with the error inforcontroller. mation.
ERROR RAM ERROR ROM FATAL ERROR CODE:XX
RAM writing/reading error. ROM error.
Contact Technical Support with the error information. Contact Technical Support with the error information. Reboot the printer. This often clears the service message, and printer operation can resume. If the problem persists, contact Technical Support.
An error has been detected with the item indicated XX in the service message.

Installing Accessories

Use of accessories not manufactured or supported by KONICA MINOLTA will void your warranty.
This chapter provides information about the following accessories. 64 MB, 128 MB, 256 MB, 512 MB DIMM (Buffered)
Dual In-Line Memory Module (DIMM) Duplex Option Lower Feeder Unit (Tray 2/3) Camera Direct Photo Print Card
Auto duplexing 500-sheet tray included When using direct printing, the optional Camera Direct Photo Print Card must be installed.
For details on installing and using the Camera Direct Photo Print Card, refer to the Installation Manual included with the Camera Direct Photo Print Card. To purchase the Camera Direct Photo Print Card, contact your local vendor or visit printer.konicaminolta.com.