Master Page: Sheet-Cov
M2VHS-Csheet.fm Page 1 Friday, October 26, 2001 11:32 AM

ENGLISH

Digital Photo Navigator

SETUP GUIDE

LYT0862-001A COPYRIGHT 2001 VICTOR COMPANY OF JAPAN, LTD.

M2VHS-C

Printed in Malaysia 1001 MKVfIDfPJ1
JVC SOFTWARE LICENSE AGREEMENT IMPORTANT
TO CUSTOMERS: MAKE SURE TO READ THIS CAREFULLY BEFORE OPENING THE SEALED SOFTWARE PACKETS
Thank you for purchasing our product. In order to start using the software program enclosed, you are required to accept the terms and conditions of the agreement as provided below.
Software License Agreement
This is a legal agreement between you (either an individual or an entity) and Victor Company of Japan, Limited (JVC). By opening the sealed software packages and/or by using the Program, you are agreeing to be bound by the terms of this Agreement. Should you not agree to the terms hereof, return the unopened software packets and the accompanying items to the place where you obtained them.

1 GRANT OF LICENSE

This License Agreement (Agreement) permits you to use the software program (Program) enclosed in this package and/or the accompanying written material (e. g. printed manuals). Although you are also granted license to load the Program into temporary memory (i. e. RAM) or install the Program once into permanent memory (e. g. hard disk, CD-R, or other storage device) of one (1) computer system, you are strictly prohibited to install the Program on a network server for the sole purpose of internal distribution.

2 COPYRIGHT

Notwithstanding the provision of Article 1 hereof, any copyright in the Program is owned exclusively by JVC and is protected by the Japanese copyright law, copyright laws of other countries, as applicable, and relevant provisions under international treaties including the Berne Convention for the Protection of Literary and Artistic Works, as amended, and the Universal Copyright Convention, as amended. Therefore, you must treat the Program like any other copyrighted material except that you may either (a) make one (1) copy of the Program solely for your personal backup or archival purposes, or (b) transfer the Program to a single hard disk, provided that you keep the original solely for your personal backup or archival purposes.
3 RESTRICTION ON THE PROGRAM
You may not reverse engineer, decompile, disassemble, revise or modify the Program, except to the extent that such restriction is expressly prohibited by applicable law. JVC and its distributors and dealers shall not be liable for any claims or defects etc. arising out of or in connection with such prohibited activities as indicated in this Agreement.

4 OTHER RESTRICTIONS

You may not rent, lease or transfer the Program to any third party nor let such a party use the Program.

M2VHS-Csheet.fm

Page 1

Master Page: Right

M2VHS-Csheet.fm Page 2 Friday, October 26, 2001 11:32 AM

5 LIMITED WARRANTY

JVC warrants that any media in which the Program is embodied (e.g. floppy discs, CD-ROM, etc.) are free from any defects in materials and workmanship for a period of thirty (30) days from the date of your purchase and that any hardware accompanying the Program is also free from defects to the extent provided in the attached Warranty Form. JVCs entire liability and your exclusive remedy in connection with the Program shall be, at JVCs option, either (a) return of the price paid, or (b) replacement of defective Program media.
6 DISCLAIMER OF WARRANTIES
EXCEPT FOR THE EXPRESS WARRANTIES STATED HEREIN AND TO THE EXTENT PERMITTED BY APPLICABLE LAW, JVC AND ITS SUPPLIERS DISCLAIM ANY OTHER WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE IN REGARD TO THE PROGRAM AND THE ACCOMPANYING PRINTED MATERIALS.

7 LIMITED LIABILITY

TO THE EXTENT PERMITTED BY APPLICABLE LAW, IN NO EVENT SHALL JVC AND ITS SUPPLIERS BE LIABLE FOR ANY INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES WHATSOEVER, REGARDLESS OF THE FORM OF ACTION WHETHER IN CONTRACT, TORT, STRICT PRODUCT LIABILITY OR OTHERWISE (INCLUDING BUT NOT LIMITED TO DAMAGES FOR LOSS OF PROFITS, BUSINESS INTERRUPTION, LOSS OF BUSINESS INFORMATION OR ANY OTHER PECUNIARY LOSS) ARISING OUT OF OR IN CONNECTION WITH THE USE OF OR INABILITY TO USE THE PROGRAM, EVEN IF JVC HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. Victor Company of Japan, Limited CAUTION: Operate this equipment according to the operating procedures described in this manual. Use only the provided CD-ROM. Never use any other CD-ROM to run this software. Do not attempt to modify this software. Changes or modifications not approved by JVC could void users authority to operate the equipment.

How to handle a CD-ROM

Take care not to soil or scratch the mirror surface (opposite to the printed surface). Do not write anything or put a sticker on either the front or back surface. If the CD-ROM gets dirty, gently wipe it with a soft cloth outward from the center hole using a circular motion. Do not use conventional disc cleaners or cleaning spray. Do not bend the CD-ROM or touch its mirror surface. Do not store your CD-ROM in a dusty, hot or humid environment. Keep it away from direct sunlight. You can find the latest information (in English) on the provided software program at our world wide web server at http://www.jvc-victor.co.jp/english/index-e.html

Page 2

M2VHS-Csheet.fm Page 3 Friday, October 26, 2001 11:32 AM

OPERATING ENVIRONMENT

A camcorder can be connected to a PC that satisfies the following requirements.

Windows

OS : Windows 98 (pre-installed), Windows 98 Second Edition (98SE) (pre-installed), Windows Millennium Edition (Me) (pre-installed), or Windows 2000 Professional (pre-installed) : Intel MMX Pentium, at least 200 MHz : At least 64 MB recommended : At least 10 MB for installation, at least 500 MB recommended : 1 free serial transmission port, compatible with 9600 bps or higher transmission rate, connectable to RS-232C with 9 pin serial connector (Recommended compatible with UART 16550A) : Must be capable of displaying 800 x 600 dots with 16-bit color
CPU RAM Free hard disk space Connectors

Display

Macintosh
Hardware OS RAM Free hard disk space Miscellaneous : iMac, iBook, Power MacintoshG3, Power MacG4, Power BookG3 or G4 equipped with a USB connector : Mac OS 8.6 to 9.1 (exclude Mac OS X) : At least 64 MB recommended : At least 2 MB for installation, at least 40 MB recommended : QuickTime 4 or later
NOTE: An optional 9 pin serial conversion adapter is required for computers using a serial communication port other than a standard 9 pin. The system requirements information above is not a guarantee that the provided software will work on all personal computers meeting those requirements. Microsoft and Windows are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries. Macintosh is a registered trademark of Apple Computer, Inc. Keyspan is a trademark of InnoSys Inc. Other product and company names included in this instruction manual are trademarks and/or registered trademarks of their respective holders.

Page 3

M2VHS-Csheet.fm Page 4 Friday, October 26, 2001 11:32 AM

NOTICE FOR USERS

Use of this software is authorized according to the terms of the software license. When contacting the nearest JVC office or agency in your country about this software (refer to the JVC Worldwide Service Network at http://www.jvc-victor.co.jp/english/worldmap/index-e.html), please fill out the following and have the appropriate information ready. Product Name Model Problem Error Message Manufacturer Model PC CPU OS Memory Available Hard Disk Space MB MB Desktop Laptop
Please note that it may take some time to respond to your questions, depending on their subject matter. JVC cannot answer questions regarding basic operation of your PC, or questions regarding specifications or performance of the OS, other applications or drivers.

Page 4

M2VHS-Csheet.fm Page 5 Friday, October 26, 2001 11:32 AM
Digital Photo Navigator FACILITY (Windows)

Create a virtual album

If you have a lot of image files with similar names, it can be hard to remember which file contains which image. You can use this software to display these images on your PC just as if you had pasted them in a photo album. Because you can scan through these images just as if you were flipping through a photo album, you can quickly find a specific image that you want to send through e-mail, for example. Can I distribute copies of albums? You can save albums in web page format. When the album is saved in this format, anyone with a browser can view the album on any type of PC. Because the album is already in web page format, you can also exhibit your photos on the Internet. Under copyright law, it is illegal to distribute copyrighted images without the permission of the copyright holder. Make sure that you have permission to distribute such images before actually doing so.
Send your favorite images by e-mail
Everyone has video cassettes containing videos and snapshots that they never get to show to anyone. No matter how wonderful, the only people that got to see them were families and guests, because there was no convenient way to show them except in your own home on the TV. Friends and relatives who live far away had no way of viewing them. And you dont want to give those video cassettes away because they hold treasured memories. Now you can solve all of these problems with a PC. By using a PC connection cable to connect a camcorder to a PC, you can capture image from the camcorder to the PC. You can then send the files to anyone as an email attachment.

Capture still images

Video images from a camcorder can be captured as still images. You can capture still images from the camcorder in real time as well as from a recorded tape.

Page 5

M2VHS-Csheet.fm Page 6 Friday, October 26, 2001 11:32 AM

CONNECTIONS (Windows)

Connect the PC connection cable to use Digital Photo Navigator. PC
To DIGITAL connector For Windows To COM port (RS-232C)

Camcorder

PC connection cable
To assure safety, make sure all units are turned off before making any connections. Use a PC connection cable to connect the camcorder to the PC. We recommend that you use the AC Adapter.
NOTE: When disconnecting the PC connection cable, be sure to turn off the camcorder and the PC.

Page 6

M2VHS-Csheet.fm Page 7 Friday, October 26, 2001 11:32 AM
SOFTWARE INSTALLATION (Windows)
Follow the procedure described below to install the software. Quit any other software you are using. (Check that there are no other application icons on the task bar.)
Load the provided CD-ROM in the PC. After a moment, the [Setup] screen appears. If the [Setup] screen does not appear, double-click [My Computer] and then double-click the CD-ROM icon. From the [Setup] screen, you can install the following softwares.
This application is used to capture still images and convert them into a variety of formats.

Acrobat Reader

This application is used to read PDF files.

NewSoft Presto! Series

This application is used to store and catalogue images or create electronic album. You can also process captured images in detail on PC.
Click [Install] on the right side of the desired software. (The following is the example of Digital Photo Navigator.) [License Agreement] screen appears.
Click [Yes]. Then, [Choose Destination Location] screen appears.

Click [Next].

Page 7
M2VHS-Csheet.fm Page 8 Friday, October 26, 2001 11:32 AM
Next, [Select Program Folder] screen appears.
Click [Next]. [Setup Status] screen appears. Wait for a moment until the installation is finished.
When the installation is finished, [Digital Photo Navigator Setup] screen appears and asks you if you want to create the icon on the desktop.

If you need it, click [Yes]. If not, click [No].
When the message asking whether it is OK to restart the PC appears, click [Yes]. The PC restarts, and after a moment the [Setup] screen from step 1 appears. Repeat steps 2 and 3 to install all of the desired software.
NOTES: The Digital Photo Navigator instruction manual is also included on the CD-ROM in PDF format. Doubleclick the [JVC] folder and then double-click the [Docs] folder. Open the Start.pdf file and click the button of the desired language. Note that Adobe Acrobat Reader must be installed to read PDF files. If you install the simplified Chinese version of NewSoft Presto! Series, Acrobat Reader for simplified Chinese is necessary to read the PDF files. Install Acrobat Reader for simplified Chinese included in the [Reader CS] folder inside the [NewSoft] folder of the provided CD-ROM. If you perform installation of a software that is already installed, uninstallation will start. In this case, perform the installation again after uninstallation is finished.

Page 8

M2VHS-Csheet.fm Page 9 Friday, October 26, 2001 11:32 AM
Digital Photo Navigator FACILITY (Macintosh)
Video images from a camcorder can be captured as still images.

CONNECTIONS (Macintosh)

Connect the PC connection cable with the optional USB PDA ADAPTER to use Digital Photo Navigator. USB PDA ADAPTER USA-19 (by KEYSPAN) is necessary to connect a camcorder to the Macintosh. PC

To DIGITAL connector

For USB PDA ADAPTER To COM port (RS-232C)
For Macintosh To USB port
USB PDA ADAPTER USA-19 (Commercially available)
To assure safety, make sure all units are turned off before making any connections. Use the PC connection cable and the USB PDA ADAPTER to connect the camcorder to the PC. We recommend that you use the AC Adapter. Install the USB PDA ADAPTER driver. For details, refer to the instructions of USB PDA ADAPTER.

Page 9

M2VHS-Csheet.fm Page 10 Friday, October 26, 2001 11:32 AM
SOFTWARE INSTALLATION (Macintosh)
Follow the procedure described below to install the software. Quit any other software you are using.
Load the provided CD-ROM into the PC. Double click the CDROM icon. The provided CD-ROM includes 3 folders. [JVC]: Includes the Digital Photo Navigator folder. [NewSoft]: Includes the Installer for Presto! Series. [Reader]: Includes the Installer for Acrobat Reader. Drag the desired software folder from the CD-ROM to the hard disk. Do not drag the folder to the System folder. Install the driver for USB PDA ADAPTER USA-19 before you start up Digital Photo Navigator. For details, refer to the instruction manual of USB PDA ADAPTER.

NOTES: The Digital Photo Navigator instruction manual is also included on the CD-ROM in PDF format. Doubleclick the [JVC] folder and then double-click the [Docs] folder. Open the Start.pdf file and click the button of the desired language. Note that Adobe Acrobat Reader must be installed to read PDF files. If you install the simplified Chinese version of NewSoft Presto! Series, Acrobat Reader for simplified Chinese is necessary to read the PDF files. Install Acrobat Reader for simplified Chinese included in the [Reader CS] folder inside the [NewSoft] folder of the provided CD-ROM.

Page 10

Master Page: Left
M2VHS-Csheet.book Page 11 Thursday, October 18, 2001 4:54 PM

Mr. Photo Gold

For Windows:
Presto! Mr. Photo 3 Presto! ImageFolio

For Macintosh:

Presto! Mr. Photo Presto! PhotoAlbum
Copyright and Trademarks 1998-2001, NewSoft Technology Corp. All Rights Reserved. No portion of this document may be copied or reproduced in any manner without prior written permission from NewSoft Technology Corp. (NewSoft). NewSoft has no warranties to this documentation and disclaims any implied warranty of merchantability or fitness for a particular purpose. All the information contained herein is subject to change without notice. All sample images and electronic files included in the documentation and distribution materials are copyrighted by their respective photographers and not allowed to be copied or reproduced in any manner. All other product names and any registered and unregistered trademarks mentioned in this manual are used for identification purposes only and remain the exclusive property of their respective owners.

M2VHS-Csheet-Presto.fm

Page 11
M2VHS-Csheet.book Page 12 Thursday, October 18, 2001 4:54 PM

TECHNICAL SUPPORT

USA: NewSoft America, Inc. 4113 Clipper Court, Fremont, CA 94538, U.S.A Tel: 1-510-445-8616 Fax: 1-510-445-8601 E-mail of sale issue: sales@newsoftinc.com Web-based tech support: www.newsoftinc.com/faq.cfm NewSoft America Inc. Web site: http://www.newsoftinc.com NewSoft Technology Corp. 3F NO. 19-3, Sanchong RD., Nankang, Taipei, Taiwan Tel: 886-2-26551201 Fax: 886-2-26551100 E-mail of sale issue: sales@newsoft.com.tw E-mail of tech support issue: support@newsoft.com.tw NewSoft Technology Corp. Web site: http://www.newsoft.com.tw NewSoft Japan Corp. 6-21-3 Shinbashi, Minato-Ku, Tokyo 105-0004, Japan Tel: 81-3-5472-7008 Fax: 81-3-5472-7009 E-mail of sale issue: support@newsoft.co.jp E-mail of tech support issue: support@newsoft.co.jp NewSoft Japan Corp. Web site: http://www.newsoft.co.jp England The Software Centre East Way, Lee Mill Industrial Estate, Ivybridge, Devon, PL21 9PE, UK Tel: (44)01752-201148 Fax: (44)01752-894833 E-mail: Tech@guildsoft.co.uk MitCom Neue Medien GmbH Anglerstrasse 6 D-80339 Muenchen Tel: +49 - (0)89 - 0 Fax: +49 - (0)89 - 22 E-mail: support@mitcom.de Graphics-France 12 rue des bles 93217 Saint Denis La Plaine cedex Tel: + 33 (0)40 Fax: + 33 (0)49 E-mail: For any information: newsoft@graphics-france.com For Mr. Photo: mphoto@graphics-france.com For VideoWorks: vworks@graphics-france.com Grapchics France Web site: http://www.graphics-france.com/ newsoft NewSoft German Representative Office E-mail: sales-eu@newsoft.eu.com

Taiwan:

Japan:

Europe:

German

France

Other countries

Page 12

M2VHS-Csheet.book Page 13 Thursday, October 18, 2001 4:54 PM
Presto! Mr. Photo 3 for Windows
Mr. Photo 3 is a complete package for managing, editing, and sharing your valuable photos and videos. Easily get and arrange photos or videos from digital cameras, scanners, or camcorders. Quickly view thumbnails of, get information about, and search for your photos and videos. With its image processing and printing functions, Mr. Photo 3 lets you share and enjoy easy access to your favorite photos and home movies.

System Requirements

Personal computer with 200MHz Pentium processor or higher. Microsoft Windows 95/98/98 SE/2000/Me. For camcorder or other video device users: Microsoft Windows 98/98 SE/2000/Me. 32 MB RAM (64 MB recommended). 180 MB free hard disk space for installation. A CD-ROM drive. Internet Connection: Internet Explorer 4.0 or later. (Optional) A Mass Storage-compliant or TWAIN-compliant digital camera or scanner. (Optional) A color inkjet printer. (Optional) A PC Camera (USB capture device). (Optional) Video capture board for capture. (Optional) IEEE 1394 card for use with a DV camcorder. (Recommended) Display card: SVGA 800X600 True-color. NOTE: Because of some system limitations, several Presto! Mr. Photo 3 video functions may not work on Windows 95. We also recommend using IE 5.0 or above.
Presto! ImageFolio for Windows
ImageFolio is a complete multimedia image-processing program with a sophisticated set of editing tools. It enables you to process photographs, graphics, and drawings captured from scanners, VCRs, a laser discs, digital cameras, video capture boxes, etc. Whether you choose to create new images or enhance old ones with ImageFolios powerful tools, your imagination is your only limit!!
The following hardware devices and software are required to run the software: Personal computer with 200 MHz Pentium processor or higher. One CD-ROM drive. One hard disk drive with at least 60 MB space available. At least 32 MB of RAM (preferably 64 MB). Microsoft Windows 95/98/2000/Me. To make full, efficient use of the program, the following additional elements are highly recommended: A scanner or digital camera that supports TWAIN or Mass Storage. A color printer supported by Microsoft Windows.

Page 13

M2VHS-Csheet.book Page 14 Thursday, October 18, 2001 4:54 PM
Presto! Mr. Photo for Macintosh
Mr. Photo is a complete package for managing, editing, and sharing your valuable photos and videos. Easily get and arrange photos or videos from digital cameras or camcorders. Quickly view thumbnails of, get information about, and search for your photos and videos. With its image processing and printing functions, Mr. Photo lets you share and enjoy easy access to your favorite photos and home movies.

For Mac OS 8.x or 9.x: A Power Macintosh computer. At least 32 MB of RAM (preferably 64 MB). Minimum 50 MB free hard disk space after installation. At least 36 MB virtual memory. CD-ROM drive. 800600 display mode or above. Recommended Equipment A Mass Storage-compliant digital camera or DV camcorder. A microphone, soundcard, and speaker. A color printer.
Presto! PhotoAlbum for Macintosh
Presto! PhotoAlbum helps you create electronic photo albums to keep your memories alive forever. Just drag photos, frames, clip art, textures, and special effects to add to your album. Personalize them with voice-overs and sound effects. Produce slide shows to post to the Internet or send completed albums by e-mail.
A Power Macintosh computer. At least 32 MB of RAM (preferably 64 MB). A hard disk drive with at least 127 MB space available to hold and run the program effectively. (67 MB for the software, and a minimum of 60 MB to be used as virtual memory for efficient use of the program.) System 8.x or 9.x. A CD-ROM drive. Recommended Equipment A sound card and a microphone. A color printer.

Page 14

M2VHS-Csheet.book Page 15 Thursday, October 18, 2001 4:54 PM
Installing Mr. Photo Gold
Follow the steps below to install Mr. Photo 3 and ImageFolio.
Insert the program CD into your CD-ROM drive. Press the Start button and choose Run. Type [drive]:\NewSoft\setup.exe and click OK. The installation program will automatically detect the language being used in the version of Windows you are running. Follow the instructions on your screen as they appear.
NOTE: When you install the program, you can choose to install Adobe Acrobat Reader if you dont have it installed. With Adobe Acrobat Reader, you can view PDF electric manuals.
To install Mr. Photo and PhotoAlbum:
Insert the program CD into your CD-ROM drive. Open the CD. Double-click on the Mr. Photo Installer or PhotoAlbum Installer icon to start the setup program. Follow the on-screen instructions to complete the installation.

Page 15

M2VHS-Csheet-Presto.fm Page 16 Thursday, October 18, 2001 4:56 PM

Page 16

Filename [M6D1_01Main_CovBCov1.fm]
M6D1_01Main_CovBCov1.fm Page 1 Thursday, January 11, 2007 4:19 PM

LYT1642-001A

SOFTWARE INSTALLATION AND USB CONNECTION GUIDE GUA DE INSTALACIN DE SOFTWARE Y CONEXIN USB

ESPAOL

ENGLISH

Filename [M7D1_01Cov.fm]

M7D1.book Page 1 Monday, February 5, 2007 4:27 PM

Contents

JVC SOFTWARE LICENSE AGREEMENT. 2 Notice for Users.. 4 System Requirements.. 4 Software Installation (Windows).. 5 Connecting (Windows).. 6 Viewing the Contents of a Memory Card (Windows)... 6 Copying Files to the PC (Windows).. 7 Playing Back Files on the PC (Windows). 8 Disconnecting the USB cable (Windows). 8 Connections (Macintosh).. 9 Viewing the Contents of a Memory Card (Macintosh).. 9 Copying Files to the PC (Macintosh).. 10 Playing Back Files on the PC (Macintosh). 10 Disconnecting the USB cable (Macintosh). 11 Users Guide/Help/Readme (Windows). 11
SOFTWARE INSTALLATION AND USB CONNECTION GUIDE

Master Page: Right

M7D1.book Page 2 Monday, February 5, 2007 4:27 PM
JVC SOFTWARE LICENSE AGREEMENT

IMPORTANT

TO CUSTOMERS: PLEASE MAKE SURE TO READ THIS CAREFULLY BEFORE INSTALLING OR USING THE SOFTWARE PROGRAM NAMED DIGITAL PHOTO NAVIGATOR (Program) ON YOUR PC. The right to use the Program is granted by Victor Company of Japan, Limited (JVC) to You only on the condition that You agree to the following. Should You not agree to the terms here of, You may not install or use the Program. HOWEVER, INSTALLING OR USING THE PROGRAM INDICATES YOUR ACCEPTANCE OF THESE TERMS AND CONDITIONS.

4 LIMITED WARRANTY

(3) You have no right to grant a license to use the Program, and may not distribute, rent, lease or transfer the Program to any third party or otherwise let them use the Program. JVC warrants that any media in which the Program is embodied are free from any defects in materials and workmanship for a period of thirty (30) days from the date of Your purchasing any our products accompanying the Program. JVCs entire liability and your exclusive remedy in connection with the Program shall be replacement of such defective media. EXCEPT FOR THE EXPRESS WARRANTIES STATED HERE IN AND TO THE EXTENT PERMITTED BY APPLICABLE LAW, JVC AND ITS LICENSORS DISCLAIM ANY OTHER WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE IN REGARD TO THE PROGRAM AND THE ACCOMPANYING PRINTED MATERIALS. SHOULD THERE BE ANY PROBLEM ARISING FROM OR CAUSED BY THE PROGRAM, YOU SHOULD SETTLE ALL SUCH PROBLEM AT YOUR OWN COST AND EXPENSE. LIMITED LIABILITY TO THE EXTENT PERMITTED BY APPLICABLE LAW, IN NO EVENT SHALL JVC AND ITS LICENSORS BE LIABLE FOR ANY INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES WHATSOEVER, REGARDLESS OF THE FORM OF ACTION WHETHER IN CONTRACT, TORT OR OTHERWISE ARISING OUT OF OR IN CONNECTION WITH THE USE OF OR INABILITY TO USE THE PROGRAM, EVEN IF JVC HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. YOU WILL INDEMNIFY AND HOLD HARMLESS JVC FROM ANY LOSS, LIABILITY OR COST ARISING OUT OF OR IN ANY WAY CONNECTED TO CLAIMS FROM ANY THIRD PARTY RELATING TO THE USE OF THE PROGRAM.

1 COPYRIGHT; OWNERSHIP

2 GRANT OF LICENSE
You acknowledge that all copyrights and other intellectual property rights in the Program are owned by JVC and its licensor, and remain vested in JVC and such licensor. The Program is protected under the copyright law of Japan and other countries, and related Conventions. (1) Subject to the conditions of this Agreement, JVC grants to You a nonexclusive right to use the Program. You may install and use the Program on a HDD or other storage devices incorporated in Your PC. (2) You may make one (1) copy of the Program solely for your personal backup or archival purposes.

3 RESTRICTION ON THE

PROGRAM
(1) You may not reverse engineer, decompile, disassemble, revise or modify the Program, except to the extent that expressly permitted by applicable law. (2) You may not copy or use the Program, in whole or in part, other than as expressly specified in this Agreement.

Master Page: Left

M7D1.book Page 3 Monday, February 5, 2007 4:27 PM

6 TERM

This Agreement will become effective on the date when You install and use the Program on Your machine, and continue to be in effect until the termination under the following provision. Should You breach any provision of this Agreement, JVC may terminate this Agreement without giving any notice to You. In this event, JVC may claim against You for any damages caused by Your breach. Should this Agreement be terminated, You must immediately destroy the Program stored in Your machine (including the erasing from any memory in Your PC), and no longer own such Program. You agree that You will not ship, transfer or export the Program or underlying information and technology to any countries to which Japan and other relevant countries have initiated an embargo on such goods. If You are an agency of the United States of America (the Government), You acknowledge JVCs representation that the Program is a Commercial Item as defined in Federal Acquisition Regulation (FAR) part 2.101 (g) consisting unpublished Commercial Computer Software as those items are used at FAR part 12.212 and is only licensed to You with the same use rights JVC grants all commercial end users pursuant to the terms of this Agreement. (1) No modification, change, addition, deletion or other alternation of or to this Agreement will be valid unless reduced to writing and signed by an authorized representative of JVC. (2) If any part of this Agreement is held invalid by or in conflict with any law having jurisdiction over this Agreement, the remaining provisions will remain in full force and effect.

(3) This Agreement shall be governed by and interpreted under the laws of Japan. The Tokyo District Court has jurisdiction over all disputes which may arise with respect to the execution, interpretation and performance of this Agreement. Victor Company of Japan, Limited NOTE: If You acquired the Program in Germany, the provisions of Sections 4 (Limited Warranty) and 5 (Limited Liability) provided above will be replaced with those of the German version of this Agreement. CAUTION: Operate this equipment according to the operating procedures described in this manual. Use only the provided CD-ROM. Never use any other CD-ROM to run this software. Do not attempt to modify this software. Changes or modifications not approved by JVC could void users authority to operate the equipment.

7 EXPORT CONTROL

8 U.S. GOVERNMENT USER

How to handle a CD-ROM

Take care not to soil or scratch the mirror surface (opposite to the printed surface). Do not write anything or put a sticker on either the front or back surface. If the CD-ROM gets dirty, gently wipe it with a soft cloth outward from the center hole. Do not use conventional disc cleaners or cleaning spray. Do not bend the CD-ROM or touch its mirror surface. Do not store your CD-ROM in a dusty, hot or humid environment. Keep it away from direct sunlight. You can find the latest information (in English) on the provided software program at our world wide web server at http://www.jvc-victor.co.jp/english/ index-e.html

9 GENERAL

M7D1.book Page 4 Monday, February 5, 2007 4:27 PM

Notice for Users

Use of this software is authorized according to the terms of the software license. When contacting the nearest JVC office or agency in your country about this software (refer to the JVC Worldwide Service Network at http://www.jvc-victor.co.jp/ english/worldmap/index-e.html), please fill out the following and have the appropriate information ready. Product Name Model Problem Error Message Manufacturer Model Desktop Laptop
CPU: Intel MMXTM Pentium, at least 200 MHz RAM: At least 64 MB Free hard disk space: At least 10 MB for installation, at least 500 MB recommended Connector: USB connector Display: Must be capable of displaying 800 x 600 dots with 16-bit color Miscellaneous: Internet Explorer 5.5 or later

Macintosh

The following requirements must be satisfied to connect a camcorder to a PC. Hardware: iMac, iBook, Power Mac G4 or G5, PowerBook G3 or G4, eMac, Mac Mini equipped with a USB connector OS: Mac OS X (10.2.8, 10.3.1 to 10.3.9, 10.4.2 to 10.4.7) RAM: At least 128 MB The system requirements information above is not a guarantee that the provided software will work on all personal computers meeting those requirements. If your PC does not meet the system requirements above, you can use the optional USB reader/writer CU-VUSD70, the PC card adapter CU-VPSD60 or the floppy disk adapter CU-VFSD50 to load the files in the memory card to the hard disk on your PC. (Refer to JVC Accessories on our world web site at: http://www.jvc-victor.co.jp/ english/accessory/) Windows are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries. Macintosh is a registered trademark of Apple Computer, Inc. Other product and company names included in this instruction manual are trademarks and/or registered trademarks of their respective holders.

CPU OS Memory Available Hard Disk Space MB MB
Please note that it may take some time to respond to your questions, depending on their subject matter. JVC cannot answer questions regarding basic operation of your PC, or questions regarding specifications or performance of the OS, other applications or drivers.

System Requirements

Windows
The following requirements must be satisfied to connect a camcorder to a PC and to use Digital Photo Navigator. OS: Windows 2000 Professional (2000) (pre-installed), Windows XP Home Edition (XP) (pre-installed), or Windows XP Professional (XP) (pre-installed)
M7D1.book Page 5 Monday, February 5, 2007 4:27 PM
Software Installation (Windows)
Follow the procedure described below to install the software. Quit any other software you are using. (Check that there are no other application icons on the status bar.)
Then, [Select Program Folder] screen appears.
Digital Photo Navigator 1.5
This application is used to organize still images and convert them into a variety of formats.
1 Load the provided CD-ROM into

the PC.

2 Follow the on screen
instructions to complete the installation.
[License Agreement] screen appears.
Click [Next]. [Setup Status] screen appears. Wait for a moment until the installation is finished.
Click [Yes]. Then, [Choose Destination Location] screen appears.
When the installation is finished, [Digital Photo Navigator Setup] screen appears and asks you if you want to create the icon on the desktop.
If you need it, click [Yes]. If not, click [No]. NOTE: If you perform installation of a software that is already installed, uninstallation will start. In this case, perform the installation again after uninstallation is finished. Click [Next].
M7D1.book Page 6 Monday, February 5, 2007 4:27 PM

Connecting (Windows)

Connecting the USB cable
Connect the USB cable to copy still image files in a memory card to the PC.
To USB Connector PC USB Cable
Viewing the Contents of a Memory Card (Windows)
1 Make sure that there is a
memory card in the camcorder.
2 Set the camcorders VIDEO/

MEMORY Switch to MEMORY.

Camcorder
3 Set the camcorders Power
Switch to PLAY while pressing down the Lock Button located on the switch.

The camcorder turns on.

To USB Connector
4 Connect the camcorder to the

PC with a USB cable. ( pg. 6)
On the camcorders LCD monitor [USB] appears.
1 To assure safety, make sure all 2
units are turned off before making any connections. Use the USB cable to connect the camcorder to the PC.

5 When using Windows XP:

The [Removable Disk] window appears on the PCs screen after a moment. Select [Open folders to view files using Windows Explorer] and click [OK]. NOTE: If the [Removable Disk] window does not appear, confirm the connection ( pg. 6) or perform the steps 1 and 2 below.
NOTES: It is recommended to use the AC Adapter as the power supply instead of the battery pack. When the USB cable is connected, turning on or off the camcorder or switching the VIDEO/MEMORY (DSC) mode on the camcorder causes malfunctions of the PC. If you connect the camcorder to the PC through a USB hub, compatibility issues between the hub and the PC may result in instability in the operation of the PC. If this happens, connect the camcorder directly to the PC, not through the hub. Do not use an extension USB cable.

When using Windows 2000:

1 Double-click the [My Computer] icon on the desktop. The [Removable Disk] icon which represents the memory card in the camcorder appears in the [My Computer] window.
M7D1.book Page 7 Monday, February 5, 2007 4:27 PM
Copying Files to the PC (Windows)
2 Double-click the [Removable Disk] icon.
Still image files that are stored in a memory card can be copied to the PC and played back on the PC.
1 Perform the procedure in
6 The folders in the memory

card appear.

Viewing the Contents of a Memory Card (Windows) ( pg. 6).

Still images

DPOF setting data
Different file types are stored in different folders. [DCIM]: Contains folders with still images (extension.jpg) [MISC]: Contains folders with DPOF setting data NOTES: Saving the wrong kinds of files in a memory card or deleting files or folders from a memory card can cause problems with the operation of the camcorder. When it is necessary to delete a file from a memory card, delete it through the camcorder. Never disconnect the USB cable while is displayed on the camcorders LCD monitor. If you are using a brand new memory card, you need to initialize the memory card with the camcorder first. You may not be able to copy files from the memory card to the PC without doing so. The file extension may not appear depending on the [FOLDER] option setting of Windows.

The folders in the memory card appear.
Create a new folder, enter the folder name, and then doubleclick it.
For example, create a new folder in the [My Pictures] folder.
Select the folder to be copied, and then drag and drop that folder in the destination folder.
To copy still images: Copy the folder within the [DCIM] folder. appears on the LCD monitor of the camcorder, and the folder is copied from the memory card to the PC. NOTE: Never disconnect the USB cable while is displayed on the camcorders LCD monitor.
M7D1.book Page 8 Monday, February 5, 2007 4:27 PM
Playing Back Files on the PC (Windows)
Use an application that can handle the JPEG file format. To view a still image, double-click the still image file (extension.jpg).

4 Click [OK].

Windows 2000: If a message indicating that the device can be safely removed appears, click [OK] and then click [Close].
Disconnecting the USB cable (Windows)
Before loading or unloading memory cards or turning off the PC, first disconnect the USB cable and turn off the camcorder. *The model name depends on the connected camcorder.

1 Confirm that

is not currently displayed on the LCD monitor of the camcorder.
If is currently displayed, wait until it disappears before proceeding.
5 Disconnect the USB cable. 6 Set the camcorders Power

Switch to OFF.

The camcorder turns off.
2 Doubleclick the [Safely Remove Hardware] or [Unplug or Eject Hardware] icon in the status bar.
The [Safely Remove Hardware] or [Unplug or Eject Hardware] dialog box appears. Windows XP: If not, wait a while then go to step 5.
3 Select [USB Mass Storage
Device] or [USB Disk], and then click [Stop].
The [Stop a Hardware device] dialog box appears. 8
M7D1.book Page 9 Monday, February 5, 2007 4:27 PM

Connections (Macintosh)

To USB Connector PC
Viewing the Contents of a Memory Card (Macintosh)
1 Make sure that there is a 2 Set the camcorders VIDEO/ 3 4
memory card in the camcorder. MEMORY Switch to MEMORY. Set the camcorders Power Switch to PLAY while pressing down the Lock Button located on the switch. Connect the camcorder to the PC with a USB cable. ( pg. 9)
On the camcorders LCD monitor [USB] appears. The memory card icon appears on the desktop. Depending on the type of OS used, iPhoto starts if the memory card contains a DCIM folder.

USB Cable

5 Double-click the memory card

icon on the desktop.

DPOF Setting data
Different file types are stored in different folders. [DCIM]: Contains folders with still images (extension.jpg) [MISC]: Contains folders with DPOF setting data

CONTINUED ON NEXT PAGE

M7D1.book Page 10 Monday, February 5, 2007 4:27 PM
NOTES: Saving the wrong kinds of files in a memory card or deleting files or folders from a memory card can cause problems with the operation of the camcorder. When it is necessary to delete a file from a memory card, delete it through the camcorder. Never disconnect the USB cable while is displayed on the camcorders LCD monitor. If you are using a brand new memory card, you need to initialize the memory card with the camcorder first. You may not be able to copy files from the memory card to the PC without doing so.
Playing Back Files on the PC (Macintosh)
Use an application that can handle the JPEG file format. To view a still image, either double-click the still image file (extension.jpg), or drag and drop the file on the application icon.
Copying Files to the PC (Macintosh)

1 Double-click the

memory card icon on the desktop.
2 Create a new folder, enter the 3
folder name, and then doubleclick it. Select the folder to be copied, and then drag and drop that folder in the destination folder.
To copy still images: Copy the folder within the [DCIM] folder. NOTE: Never disconnect the USB cable while is displayed on the camcorders LCD monitor. 10
M7D1.book Page 11 Monday, February 5, 2007 4:27 PM
Disconnecting the USB cable (Macintosh)
Before loading or unloading memory cards or turning off the PC, first disconnect the USB cable and turn off the camcorder.
Users Guide/Help/Readme (Windows)
This manual only refers to software installation and PC connection. For more details of each software, refer to its users guide/help/Readme.

1 Drop the memory card

icon on the desktop into the [Trash] icon.
If the confirmation message appears, click [OK].

Digital Photo Navigator

The instruction manual is included on the CD-ROM in PDF format. Right-click the CD-ROM icon in [My Computer], then click [Open]. Double-click the [Docs] folder. Open the Start.pdf file and click the button of the desired language. Note that Adobe Acrobat ReaderTM or Adobe Reader must be installed to read PDF files. Adobe Reader can be loaded from Adobes web site: http://www.adobe.com/

2 Confirm that

3 Disconnect the USB cable. 4 Set the camcorders Power
M7D1.book Page 12 Monday, February 5, 2007 4:27 PM
Printed in Malaysia 1106YDR-YG-MP
2006 Victor Company of Japan, Limited
M7D1.book Page 1 Monday, February 5, 2007 4:28 PM

Contenido

CONVENIO DE LICENCIA DEL SOFTWARE DE JVC... 2 Aviso a los usuarios.. 4 Requisitos del sistema.. 5 Instalacin del software (Windows).. 5 Conexiones (Windows). 6 Visualizacin de los contenidos de una tarjeta de memoria (Windows).. 7 Para copiar archivos al PC (Windows). 8 Para reproducir archivos en el PC (Windows).. 8 Desconexin del cable USB (Windows).. 8 Conexiones (Macintosh). 10 Visualizacin de los contenidos de una tarjeta de memoria (Macintosh).. 10 Para copiar archivos al PC (Macintosh). 11 Para reproducir archivos en el PC (Macintosh).. 11 Desconexin del cable USB (Macintosh). 11 Gua del usuario/Ayuda en lnea/Lame (Windows)... 11