Saitek

SST Programming Software

USER GUIDE

SST PROGRAMMING SOFTWARE
Introduction Welcome to Saitek Smart Technology (SST) - a powerful software which increases the functionality of your Saitek controller. Most modern games do have their own control configuration screens, but by using the SST software you can: Increase the number of functions you can assign to the controls on your controller through shift states and multiple modes; Create and save profiles for your favorite PC games, which you can load to configure your controller for that game every time you want to play it; Assign keyboard and mouse commands to your Saitek controller to play PC games that do not offer support for game pads and joysticks.
Tip: The Profile Editor can also be run by clicking Start>All Programs>Saitek SD6 Programming Software>Profile Editor

Getting Started

You should already have installed the SST software and plugged in your controller for the first time - if you haven't, install the SST software from the Saitek installation disc and then plug the USB cable of your controller into one of your computer's free USB ports. When you have plugged your controller in you are now ready to start programming and the SST Profile Editor - the tool by which you assign functions to your controller - will automatically appear. After this, an icon will appear in taskbar next to your clock every time you plug in your controller. This is called the Profile Launcher and looks like this: Right-click on the controller icon (this could be a joystick, wheel, gamepad etc depending on which controller you have) and you will see the pop-up menu right: Clear Profile is used whenever you want to completely clear a one of your controller profiles; Clear Startup clears a profile which has been set up as start-up profile (see below for more information) Profile Editor will open the screen on the next page. Please note that this example uses the X52 Pro controller but the procedure for programming every Saitek controller is exactly the same; the only difference is that each Saitek controller will have its own feature set - buttons, hat switches, triggers etc - that are designed to perform particular functions in games. Control Panel will bring up the test and calibration screens for your controller.
If you have more than one Saitek controller plugged in at the same time, you will have a separate icon for each controller. When you hold your mouse cursor over the small icon a pop-up tooltip will tell you which controller the icon refers to. www.saitek.com takes you to our website

Profile Editor

Simple Commands or Keystrokes Every game assigns many in-game commands to various keys or combinations of keys on the keyboard. Using the Profile Editor, you can make the buttons on your controller act as keystrokes on the keyboard. Programming a keyboard command to a button or control In the column of buttons and controls click on the space just beneath the name of the button you wish to program. In the example we have clicked on the space just beneath the trigger. This makes the cursor flash, indicating that you can input a keystroke. As an example, imagine you were programming the controller for a game and we wanted to use the trigger for firing a weapon. In the game, the key on the keyboard that does this is the Space key. So, press the space key on the keyboard and it will appear in the line onscreen like the screen above.
If this is okay simply click the green tick to the right of the cursor. Once you have decided on your keystroke and clicked on the green tick, the Editor will prompt you to name your command - your screen should look like this. Tip: If you have made a mistake or wish to clear a keystroke that you have assigned, right click on the keystroke you wish to remove and click Delete from the drop down list of options. If you wish to clear all the keystrokes from the line then click Clear All. The software is now telling us that the trigger, when pressed, will initiate the Space bar command on the keyboard. This command has been named "Fire" to match what was typed when prompted. If you wish to rename the keystroke, point the mouse cursor at the word "fire" and click the left mouse button once. You will see that the word is now highlighted.

Mouse scroll wheel and hotkey commands
As well as keystrokes and mouse clicks, you can also program a command to activate the scroll wheel function on the mouse or keyboard multimedia hotkeys. To add these type of commands, click a cell to add a keypress, then click the right mouse button to bring up a context-sensitive menu - you will find the Mouse Scroll wheel and Hotkey options in this drop-down menu. You have the option of programming either scroll up or scroll down commands for the mouse wheel; if you select Hotkey, a new window opens with a selection of hotkey commands. Choose the comman you want to assign to this button and click OK.
Multiple keystrokes/Combined keystrokes
You are not limited to single keystrokes when programming commands. You can input as many keys into one command as you like, or combined keys, such as Ctrl+F, for example. The process is the same as inputting single keystrokes - just press the keys you wish to program into the command. Tip: Be aware that the Editor In the example right we have input a Ctrl F command. If you want to make sure that keypresses do happen at the same time, right click your mouse, click Quantize time and set time delay to 0.000 seconds. records keypresses exactly as you have input them. Therefore, if you press Ctrl and then wait 5 seconds before pressing F, this is how the command will activate when used in a game.
The context-sensitive programming menu
Before proceeding, it's important to examine this dropdown menu. There are a number of possible choices: Latched: this enables the button to behave like a keypress repeat if a command has been assigned to that button. If the button has been set up as shift button and then set as latched, it will behave more like a keyboard lock key so that you press it once to lock it and press again to unlock it - see below for more information. Unprogrammed: This will remove any programmed command and make the button behave like a normal game controller button.
You can now type the new name that you wish to call this command. In this case it's been named Fire Weapon but you can call it whatever is appropriate to the command you are creating. Press the Enter/Return key after typing your chosen command name and it will update as the screen right. You have just created the first command for your controller.
Tip: It's generally not a good idea to program a button as latched unless you want to set up a command which continuously repeats until stopped by you.

Fall back: By default, any commands that you program to a button in the basic mode or shift state will automatically be carried over to the other modes or shift states. When Fall back is ticked, this is the case. You will probably want to assign different commands to individual buttons in different modes. To do this, type a new keypress or sequence of key presses in the button cell as shown below. New Key Presses: enables you to input keystrokes for a new command, just like the above examples. New Macro is the option we will be clicking next. See below. Tip: A button can be programmed with an individual keypress, unprogrammed, or Fall back to the keypress of another mode or shift state. By default, other modes or shift states Fall back to Mode 1. However, you can assign them to Fall back to other modes or shift states as explained below. New Advanced Command: offers more options involving repeat functions which Tip: The commands we have created will be covered later. previously are listed beneath the Delete Unused Commands menu item. We can Delete Unused Commands: When either reuse these when programming programming keypresses to buttons you other buttons, or choose to delete them may create more commands than you individually or all together. actually end up using. When you're happy with the commands you've input for all the buttons in all the modes and shift states, if you click on Delete Unused Commands the programming software will detect and list all commands not in use and give you the option to delete them. Please note, you can only delete the commands you have created.
In order for the multiple keystrokes in the above example to actually happen you have to keep the assigned button held down until all of the commands have activated. But if the above sequence had been assigned as a macro then you would just have to press the assigned button once and the keystrokes would then activate automatically. Creating a macro is similar to creating a keystroke sequence. To create a macro, right click on the button cell to which you want to assign the macro and then select New Macro from the drop-down menu. You will see the cursor is flashing in the cell, just like for a basic command. Now input your keystroke sequence, exactly as you would input it in the game using the keyboard. You will notice that the keys are Tip: As with basic shaded to indicate that keystroke sequences, they are part of a macro the delay between and not just a basic macro keystrokes will keystroke sequence. be exactly as you have input them, Click the green tick mark unless you choose to when you have finished change the sequence inputting your chosen timings. This is macro sequence. Just as explained below. with keystrokes, the editor will prompt you to name your command. When you have named the macro, hit the return key on the keyboard.

Advanced Commands

Going back to the drop-down menu that appears when you right-click on a button line, click the New Advanced Command option. This will open the window right. Each window represents a different state of the button to which you are assigning the Advanced Command. Any keystroke sequence in the Press row will happen when you press the button the command is assigned to.

New Macro

Having covered the basic types of keystroke, we now need to look at another type of keystroke command - the macro. A macro is a sequence of keystrokes that can be executed with the single press of a button. At first you might think that this is exactly the same as the multiple keystrokes assigned to the trigger in the above example. However this is not the case. Tip: You need both types of command because a macro can't be interrupted except by pressing another command on the controller. However, a simple sequence of keystrokes, like the one in the above example, can be interrupted by releasing the button. This could be important depending on the game you're playing.
Any keystrokes that are in the repeat row will happen as long as you keep the button they are assigned to held down. Any keystrokes in the release column will happen as soon as you release the button that the Advanced Command is assigned to. However, the difference with the release row is that, by default, any multiple keystrokes will act like a macro and happen automatically without you holding any keys down. Unlike the other keystroke input windows, when pressed, each key places two instances of the key in the command input window - as in the example right. This is because when you press a key on a keyboard it actually produces two signals - one when you press it and another when you let go. In the example you can see that the S key was held down for 0.046 seconds and the D key for 0.046 seconds (0.248-0.202). Unlike the other views of keystroke sequences, you will notice that each keypress has a figure underneath which represents the time in seconds from when you pressed the first key in the sequence.
If your controller has more shift states already implemented, this will be represented by multiple columns within the profile editor. Each column contains a new set of commands which are assigned to your controller's buttons when the shift state is initiated. In the example right you can see that we have set the Trigger to be Fire Weapon in Mode 1 and Landing Gear in Mode 2. Every controller will have a different method of changing between shift states, either via a mode switch or a prespecified "shift" button.

Tip: Note that if your controllers has "modes" then these are treated as shift states by the profile editor (eg, X45, X52, X52 Pro, Aviator, Pro Gamer Command Unit, Game pads).
Tip: You can easily set the sequence of keystrokes to function as a Macro by ticking the Macro box at the top right of each row.
In the above example, the first shift state - Mode 2 - is initiated by selecting Mode 2 with the controller's Mode selection switch. A new feature of the Saitek Programming Software is that you can now create additional shift states if you wish. To do this, go to the far right column and click "Create Shiftstate". You will be prompted to name the new shift state. In the example below, we have named it Mode 4. This created a new column for the controls initiated in Mode 4. In order to actually use this mode we need to select which button on the controller will activate it. Left click on the cell to the left of "click to select shift buttons" - a drop down menu will appear with all the buttons available on your controller. Simply select the button which will activate this shift state. In the example below we have selected Fire C. Tip: Any button which you select as a shift button will no longer be programmable with normal commands. This is to avoid conflicts between the functions of buttons in different shift states.
Tip: To adjust the keystroke sequence timings left click on the key you wish to adjust, then right click and select Set Delay. Now enter the exact time after at which you want the keystroke to activate. Note, this is the time elapsed since the first key in the sequence was pressed.
For example, with the Advanced Editor you could set a command that launches a missile when you press the button. It might then switch to a camera view of the missile and then 4.5 seconds later switch to a camera view of the enemy. When you let go of the button it could switch back to your cockpit view. Obviously this is just a hypothetical example but it gives you an idea of the possibilities open to you with the Advanced Editor.

Shift States/Modes

Most programmable Saitek controllers have shift modes already implemented by default. This is a function that enables you to 'double up' the number of commands that you can assign to each button. For example, just as the period/full stop key on your keyboard can prints a '>' symbol when you hold down shift, you can assign a second command to each of the buttons on your controller.
Another new feature is the ability to program a keystroke which will be initiated when you switch to that shift state. For example, in some flight simulations, different combat scenarios (air-to-air, air-to-ground etc) are activated by pressing different keys on the keyboard. You can now program that scenario to be associated with a different shift state of your controller and the specific functions of the buttons programmed in that shift state. To program the keystroke, left click the cell in the shift state column to the left of the "click to add shift command" option. You will be prompted to name the command. Enter the name of the command, click in the cell beneath it and input the keystroke. Now click the green tick mark. At this point you may also select the shift state that this mode will fall back to. To do this, select the cell below the shift state name and select the shift state from the drop down list. Tip: Remember that whilst you may want to change the functions of your buttons in different shift states, you may still want some buttons to perform the same functions in all shift states. Fall Back means that the programmed commands of a shift state will default to another shift state unless otherwise specified.
for the POV to operate as either a set of programmable buttons (the number of which is selected by choosing 8 way or 4 way), or as a mouse. If you select bands then you will be presented with a new cell for each direction of movement of the POV. These can be programmed in exactly the same way as buttons. If you choose the POV to function as a mouse, you will be presented with the option above right. With this, you can set the sensitivity of both mouse axes with the central slider or set the sensitivity of the individual axis of movement with the slider controls for horizontal and vertical movement. Axis Programming (rotaries, thumb wheels etc) The final parts of your controller that can be programmed are the axes. These are basically anything that has a range of movement on your controller such as a rudder twist, throttle lever or rotary switch. You can program the axes on your controller with keyboard commands, just like buttons and hat switches. Generally speaking, the main axes of a controller should be left to work as axes, simply because most games detect these by default anyway. However, some games don't support controllers at all (so you could then configure the stick to pretend to be a part of the keyboard for example) and programming the axes would allow you to make the controller work in the game where otherwise it wouldn't. The first step for programming an axis is to set it to banded mode. In the Profile Editor right click on the appropriate axis (or left click the small arrow on the right of the axis cell) and choose Bands from the drop-down list. Your mouse cursor will change shape so that it looks like a horizontal line with a vertical, double-headed arrow running through it. Note: don't click anything yet! We need to split the axis up into banded areas so that we can then assign keyboard commands to those areas. Using the example we'll create a simple program where moving the rotary in one direction will give an 'A' keystroke and moving it in the other will give a 'B' keystroke. First we need to create banded areas - this is done using the mouse. The horizontal line with the arrow running through it indicates that you'll set a 'split point' where you next click in that area.

You may also delete shift states - even the default shift states of your controller - by clicking on the cross mark to the right of the mode name. Finally, you can change the name of a shift state. Simply click on the name cell at the top of the column, and then type your new name.
Programming Hat/POV (Point-of-View) Switches
Most controllers supported by SST have a Hat, or POV switch. On the joysticks and pads a POV switch is usually used as a device for looking through the different views from a cockpit in a flight sim or first person shooter game, but you can assign it to do whatever you want. If left unprogrammed, the POV switch will act as either a default POV or a set of four buttons, depending on in which direction it is pushed but this can easily be changed. To start programming the POV simply put your mouse pointer over the cell of the POV you wish to program. You'll notice that an arrow appears in the top right corner of the cell. Click on it and a drop down menu appears. Like the button commands, you can select Unprogrammed or Fall back. You also have the option
In the picture right that we have created a split point at the 70% mark on the axis' scale. You should now also create a second split and then click the middle icon which spaces the areas out evenly. Now click OK to set those split positions in place. Once you have clicked OK you can program keystrokes, macros or advanced commands to the areas just like any button on the controller. Using the 'A' and 'B' example above we get the example below right. Why didn't we just create one split so that the axis area was split in half and then just assign the keystrokes to the two areas? It's simply because you need a position where the axis is 'at rest' and isn't issuing any keyboard commands. In the above example no commands are assigned to the middle position of the area. This is because no matter which controller you have or which axis you are programming, you must always have a band at the middle of the axis movement with no command assigned to it (commonly called a deadzone). You can create as many splits as you want but too many can become complicated.

Click the Mouse X Axis option to make that axis control the left/right movement of the mouse and the Mouse Y Axis option to make it control the up/down movement. Once one of the Mouse Axis options is selected you will see a slider bar which controls the sensitivity of the mouse movements; the far left setting the slowest, and the far right-setting the fastest.

Saving the Profile

When you've finished assigning all the commands you want you must save the profile so that you can access it again later. Click the save icon at the top of the Profile Editor and then click Save. Just as when you save a document on your computer, the Profile Editor will ask you where you wish to save the profile and what you wish to call it. Do not change the location of the profile - it must be saved in the directory that is already in the save window or a subfolder. The name of the profile should ideally be the name of the game for which you have created the profile. Once you've given the file the appropriate name, click Save to save the profile.

Directional Axis

A new feature is the ability to program an axis to initiate different keypresses depending on which direction it is moved in. To do this, select the cell as above, and choose Directional axis. You can then program keystrokes to each direction of movement for that axis. The sensitivity slider allows you to alter how often the programmed keypress is made for a certain range of movement of the axis.

Activating the Profile

To activate the profile simply right click on the small controller icon next to your clock. You will now notice that the profile that you saved is at the top of the pop-up menu. In the example below you can see that we called the profile 'Test'.
Tip: Some controllers such as the X52 and X52 Pro already have mouse axes controls. As we are using the X52 Pro for our example, to program another axis to act as a mouse axis, you must first ensure that the default Mouse X and Mouse Y axes are unprogrammed.
Click on your profile and you will notice that the small controller icon now has a green square behind it, indicating that a profile has been loaded into the controller. If you wish to clear the profile from your controller at any point, simply right click the controller icon and click Clear Profile. The green circle will disappear indicating that the controller is now cleared of any commands. If you wish, you may set a profile of your choice to automatically load into your controller at Windows start-up. To do this, right click on the small controller icon next to your clock to bring up the profile menu. Right click the profile you wish to set and select Set as Startup Profile. If you ever wish to clear this then select Clear Startup from the Profile menu.

Mouse Emulation

You can also program an axis to emulate the movements of the mouse cursor. To do this, right click the axis you want to become a mouse movement and you will see the following menu:

Testing the Profile

When you have activated the profile you can test it. A good way to do this is to open up Wordpad in Windows - when you then press the buttons on your controller, the assigned keystrokes will appear in Wordpad. Please note that this will only work with basic keys that you would normally type into a word processor ie, letters, numbers and punctuation. The function keys (F1, F2 etc) shift, alt and ctrl keys won't display in a word processor document either.

Printing the Profile

Once everything is programmed into your controller you may find yourself forgetting which commands you have assigned to each button, especially if you have used shift modes. To help you remember we have included a printing facility in the SST software which produces pages showing the buttons/hats/axes of the controller and which commands are assigned. However, please note that this will only be useful if you have named your commands as described in the simple keystrokes section of this guide. To print your profile out, simply load it into Profile Editor and click the printer icon at the top right hand corner of your screen.

www.saitek.com

01/06/07

Pro Flight Rudder Pedals

USER MANUAL

GETTING STARTED

Introduction
The Saitek Pro Flight Rudder Pedals are solid 3-axis rudder pedals designed to maxi mise realism by enabling foot control of the rudder function in flightsimulation PCGames. The Pro Flight Rudder Pedals work with any Saitek PC Flight Stick, but are designed specifically to complement the Saitek X52 Flight Control System to enhance flight sim experiences.
Features: Self-centering pedals with adjustable tension Silent, smooth action for optimum control and precision Toe brakes Tension adjustment - choose resistance to suit the way you fly Pedals adjust to fit all sizes and include non-slip materials High quality, solid, construction for long life Advanced SST Programming
Installation for Users of Windows XP and Windows XP64
A) Drivers Only For Typical Users 1. With your computer switched on, close down any programs that are currently running and insert the Saitek Smart Technology CD into your CD-ROM drive. 2. When the Introduction Screen appears, click Install Software to continue. If the CD does not run automatically, select Start from the Windows Taskbar,then Run and type D:\Setup.exe and click OK - where D:\ is letter of your CD-ROM drive. 3. When the Welcome screen appears, click Next to continue. 4. After reading the Disclaimer, select the I accept the terms of the Disclaimer optio n and click Next to continue. 5. At the Driver Setup screen, if you haven't already done so, plug the USB cable into one of your computer's USB ports and click on Next. 6. When the Saitek Controller test screen appears, try out your rudder pedalscontrols to show that they are working properly. When you have finished, click OK 7. At the Software Setup screen, select Do not install the SST Programming Software and click Next. The Programming Software can be installed at a laterdate by following instruction (B). below 8. At the Registration screen, select Check this box to register now and follow the on -screen instructions, or you can choose to select this option later. 9. Click on Finish to complete the installation. B) Drivers and Programming Software For Advanced Users

1 of 5

19/12/2006 16:43
Follow points 1 - 6 of the install procedure in A), then at the Software Setup scre en, select Install the SST Programming Software and click Next. In the following Software Setup screen, click Next and follow the on-screen instructions. At this point you will be asked to install such features as the Saitek Magic Mouse, HID-compliant mouse, Sait ek Magic Keyboard and HID Keyboard Device (these are what XPcalls the various elements of your Saitek controller). Con tinue to click on Next and Finish to accept the installation until the Registration screen appears. At the Registration screen, sel ect Check this box to register now and follow the on-screen instructions, or do not select this option and register later. Upon compl etion of the installation, you have the option to Run Profile Editor, which will give you a view of the 3D programming environment. If you do not wish to see the Profile Editor at this point, just uncheck the box and click on Finish to complete the installation.
Installation for Users of Windows 2000
A) Drivers Only For Typical Users 1. With your computer switched on, close down any programs that are currently running and insert the Saitek Smart Technology CD into your CD-ROM drive. 2. When the Introduction Screen appears, click Install Software to continue. If the CD does not run automatically, select Start from the Windows Taskbar,then Run and type D:\Setup.exe and click OK - where D:\ is letter of your CD-ROM drive. 3. When the Welcome screen appears, click Next to continue. 4. After reading the Disclaimer, select the I accept the terms of the Disclaimer optio n and click Next to continue. 5. At the Device Driver Installation screen, click on Next and follow the on-screen in structions. 6. When prompted, plug the USB cable into one of your computer's USB ports and click on Configure. 7. When the Controller Properties screen appears, click Next to view the Test screen. 8. Now try out your rudder pedalscontrols to show that they are working properly. When you have finished, click OK. 9. At the Programming Software screen, select Typical User and click Next. 10. At the Registration screen, select Register and follow the on-screen instructions o r select Register Later and click Next. 11. Click on Finish to complete the installation. B) Drivers and Programming Software For Advanced Users 1. Follow points 1 - 8 of the install procedure in A), then at the Programming Software screen, select Advanced User and click Next. 2. At the Programmable Controller Drivers screen, click Update and follow the on-scree n instructions. 3. Then at the Installation of programming software successful screen, click Next. 4. At the Registration screen, select Register and follow the on-screen instructions o r select Register Later and click Next. 5. Upon completion of the installation, you have the option to Run Profile Editor, which will give you a view of the 3D programming environment. If you do not wish to see the Profile Editor at this point, just uncheck the box and click on Finish to complete the installation.

IMPORTANT INFORMATION

A Word on Driver Updates From time to time there may be updates to the driver and programming software for this product. You can check for the latest software updates by visiting the Saitek website and clicki ng on Downloads. A drop down menu will appear. Select Drivers and Software. For Windows XPand XP64 users; Dynamic updates If you have downloaded new drivers from Windows update and want to use SST programming software, you will need to obtain an updated version of thesoftware. To obtain the new version, open t he Game Controllers icon in Control Panel, select the controller in the window and click Properties. At the top of theProperti es window click the About tab and you will see a link that says Click here to download the SST Programming Software. Click on the link and Windowswill give a download prompt asking if you want to open the file or save it. Choose to save it to your preferred location on your computer's hard disk and the file will start downloading. Once the file has downloaded, find it on your hard disk and double click on it to install the programming software. Enabling Your Controller in Game Most games support game controllers, which you can enable by using a [control] options menu within the Main Menu of the game itself. If you are having trouble working out how to do this or if you're unsure whether the game being used supports game controllers, please refer to the user manual for that gamefor more help. How to Test and adjust your controller You can test your controller at any time by Clicking on Start, then Settings and selecting Control Panel in Windows (XP users may only need to click on Start and then Control Panel). Look for an icon called either Game Controllers or Gaming Options (XP users may have to click Printers and Other Hardware first). Open the Game Controllers/Gaming Options window - the Saitek Pro Flight Rudder pedals should appear. Click on Properties to bring upthe test screen. Click on the Test tab. Moving your rudder pedals should result in a response in this screen; if there is a response you know that the rudder pedals are functioning correctly. Click on the Deadzones tab of the Properties window. You c the deadzones (ie, the distance of pedal travel which doesnt corresponding rudder movement in-game) of the Pro Flight R Pedals by clicking on the deadzone axes and dragging the d indicators to the desired level. To test the new settings click tab or try out by playing a flight sim game.

2 of 5

PROGRAMMING YOUR SAITEK CONTROLLER WITH SAITEK SMART TECHNOLOGY PROGRAMMING SOFTWARE

Introducing Saitek Smart Technology Programming Software
Saitek Smart Technology Programming Software (SST) is the software Saitek supplies to configure your Saitek controller for enhanced functionality. SST delivers a powerful set of features, allowing you to program your device with the ultimate configuration for total interaction. Despite a level of sophistication previously unseen in the m arket, and because of the Saitek Smart Technology inside, the software remains simple and intuitive to use. For a complete guide on h ow to program your Saitek controller, visit the Saitek website at www.saitek.com. Features of Smart Technology Programming Software: Quick and easy setup in any game Personalize the controller settings for your favorite games Configure your controller with an on-screen 3D model and interface Multiple setup option for each controller - ideal if a controller is used by severa l people Program special moves with sophisticated timing features Special game setups available as 'Profiles' from the Saitek website and on the Smar t Technology CD Download the latest version of Saitek Smart Technology software from the Saitek website What is a Profile A Profile is a custom setup for improved gameplay - consisting of a set of commands that are pre-assigned to the buttons or axes of your controller. There are pre-written Profiles available on the Product Companion Disk that accompanies this device. Please also check the Saitek Website (www.saitek.com) for new profiles which will be added for Pro Flight Rudder Pedals. How Do I Program My Controller? After getting to know your controller, you can start creating your own personal Profiles with the Saitek Smart Technology programming software (SST). This software has virtually unlimited programming capabilities and allows you to customize the controller to your exact gaming needs. The Profile Editor allows you to program the buttons on your controller to perform different actions within your games - this is especially useful if the game you are using does not have its own screen that allows reconfiguring of your controller. Getting Started 1. Double-click on the Saitek Smart Technology icon the install left on your desktop. 2. In the Profile Editor, choose the control to which you wish to assign a keyboard command. You do this by left-clicking on the control's cell in the control list on the right of the screen. 3. With the cursor flashing, type in the key commands and then click on the green tick mark when complete. 4. Repeat this procedure for all the buttons you would like to program and then click File, Save at the top of the Profile Editor window. 5. Give the profile a name (it is recommended you name it after the game for which the profile is intended) and then click Save. 6. To enable the profile either click the Profile Now icon at the top of the Profile E ditor (it looks like a black and yellow crosshair) or right-click on the controller icon in your taskbar and select the nam e of the profile from the pop-up list of options. 7. You will notice that when a profile is loaded that the controller icon in your taskbar has a green square behind it, indicating

3 of 5

that a profile is currently loaded. If you wish to unload a profile simply right-click on the controller icon and click Clear Profile from the pop-up list of options. If you require more detailed assistance with using the SST Programming Software, click on Help at the top of the Profile Editor and then Manual.
GAME-SPECIFIC SETTINGS FOR THE SAITEK PRO FLIGHT RUDDER PEDALS
Flight Simulator 2004 From the main Flight Simulator 2004 splash screen, choose the Settings option, this can be found in the bottom left hand corner of the screen. Once in the settings page, first click on the Assignments button, this will take yo u to the controller assignments screen. On the controller assignments screen you will first need to click on the Joystick Axis tab. Next click on the drop arrow called Joystick Type next to the box in the upper right of the screen. When the arrow is pressed a drop-down menu will appear listing all the game controllers connected to your PC. In this list you will see the Saitek Pro Flight Rudder Pedals. Click on this controller - the menu will now disap pear and the Saitek Pro Flight Rudder Pedals will appear as the entry in the joystick type box. Next, in the assignment list in the middle of the page, scroll down until you find the entry on the left, that says Left Brake Axis. Next to the left brake axis there should be an entry that says Left toe, and next to this there should be a box that has a tick in it. If it does not, hover over the box with your mousepointer and left cl ick - a tick should now appear in the box. You also need to carry out this procedure for the Right Brake Axis. Once this is done click on OK to go back to the main settings screen. From the main setting screen click on the sensitivities icon From the Controller - Sensitivities page click on the drop arrow next to the box ca lled Joystick Type in the upper right of the screen. When the arrow is pressed a drop down menu will appear listing all the game controllers connected to your PC. In this list you will see the Saitek Pro Flight Rudder Pedals.Click on this controller and the menu will now disappear and be replaced by the Saitek Pro Flight Rudder Pedals On the screen you will see Simple and Advance radial buttons, Make sure the Simple radial is selected - if not move your mouse over the radial buttonand left click - a dot will appear in the radial. Just under and to the right of the simple radial button, you will see two sliders, one marked Sensitivity - all axes and the other marked Null zone - all axes. Move the sensitivity slider all the way over to the right and move the null zone slider about 3% down the slider, as in the picture below. To move theslider, simply left click and hold on it and move to desired setting. Once this has been done click OK to go back to the main settings screen. From here you can choose an option from the menu on the right of the page. Lock On We have included some tips below on configuring your Saitek Pro Flight Rudder Pedal s for Lock On. For more detailed instructions please consult your Lock On manual. In the Input settings page make sure you have selected the Saitek Pro Flight Rudder Pedals in the devices drop down menu. Make sure the Input is set to Axes and not Buttons. In the command list make sure that the only axis assigned is the Rotator 2 axis which is assigned to the rudder. To change or delete an axis assignment from the control list, click on the control name on the left, then click either clear or change from the top of the page. To test the rudder axis, make sure the test panel icon on the right side of the pag e is set to on. The response curve should look similar to picture below The Axis / Slider switch should be set to Axis Pacific Fighters, IL2 and IL2 Expansion Packs We have included some tips below on configuring your Saitek Pro Flight Rudder Pedal s for Pacific Fighters, IL2 and IL2 Expansion Packs. For more detailed instructions please consult your manual. To get to the controller setup page, at the main menu, click on hardware setup and then click on Input. From the Input page you will need to click on HOTAS control. Under the HOTAS control section you will need to assign your Saitek Pro Flight Rudder Pedals to your rudder. To do this click in the right panel alongside the rudder pedals - when a box appears move the Saitek Pro Flight Rudder Pedals (right pedal first) the words "Z-Axis Rotation ID2" should appear to show the Pro Flight Rudder pedals are selected as in the picture below. Click on apply when this is set Note - When using the in game test page the Saitek Pro Flight Rudder Pedals will no t respond unless they are the only controller plugged in - the ingame controller test screen only responds to the first controlle r to be plugged in.

Technical Support Can't get your controller to work - don't worry, we're here to help you! Nearly all the products that are returned to us as faulty are not faulty at all - they have just not been installed properly. If you experience any difficulty with this product, please first visit our website www.saitek.com. The technical support area will provide you with all the information you need to get the most out of your

4 of 5

product and should solve any problems you might have. If you do not have access to the internet, or if the website cannot answer your question, please contact your local Saitek Technical Support Team. We aim to offer quick, comprehensive and thorough technical support to all our users so, before you call, please make sure you have a ll the relevant information at hand. To find your local Saitek Technical Support Center , please see the separate Technical Support C enter sheet that came packaged with this product.

5 of 5