[User Name] [User Name List]

[Password] [Server Name]

[Login] Account Track
Performs the account track procedure to use this machine. [Account Name] [Password] Enter the account name. Enter the password. When the [Account Track Input Method] is set to [Password Only] in [Administrator Settings], the login screen displays only [Password]. The user can directly enter the password in the login screen from the keypad. For an all-number password, the user can log in without displaying the keyboard screen, simply by pressing [Login], or the Access key. For a password containing alphabets, numbers and/or symbol characters, press [Password] and then enter the password. After entering numbers from the keypad, press [Password] to enter alphabets and symbols in succession. Displays the basic settings screen, enabling you to use this machine.

[Login]

To configure user authentication/account track: Press the Utility/Counter key [Administrator Settings] [User Authentication/ Account Track].
Using the machine during non-scheduled hours
The machine can be set to automatically enter Sleep mode according to a usage schedule determined by the administrator so the use of the machine can be limited. This is referred to as Weekly Timer. Follow the procedure described below to use the machine while the Weekly Timer is being used. 0 From the [Password for Non-Business Hours] screen (displayed from Administrator Settings mode), the machine can be set so that the screen for entering the password for non-business hours is not displayed. Press the Power Save key. Enter the password for non-business hours. Press [OK]. Using the keypad, enter the length of time to elapse before the machine enters Sleep mode again.
Press [OK]. The basic settings screen appears.
To configure Weekly Timer: Press the Utility/Counter key [Administrator Settings] [System Settings] [Weekly Timer Settings].
If no operation is performed for a specified length of time, the touch panel goes off and the machine automatically enters a mode where it conserves energy. This is referred to as Low Power or Sleep mode. The following describes the procedure for returning from Low Power or Sleep mode. Although the machine conserves more energy in Sleep mode than in Low Power mode, the warm-up process for returning to ready-for-copy state from Sleep mode is more time-consuming. As the factory default, Low Power mode is set to restart after 15 minutes and Sleep mode after 20 minutes. In other words, the machine enters Low Power mode if no operation is performed for 15 minutes. Likewise, it enters Sleep mode after 20 minutes has elapsed. The machine can receive jobs even while it is in Low Power mode. Press the Power Save key. The machine returns from Low Power mode when any other key on the Control Panel or the Touch Panel surface is pressed.

Page numbers cannot be printed on blank pages inserted using the Cover Sheet, Insert Sheet and Chapters functions. Change the setting for printing on blank pages in Administrator Settings to enable blank page printing.
Press [Application] [Stamp/Composition] [Page Number].
Settings [Starting Page Number] [Starting Chapter Number] [Page Number Type] [Insert Sheet Setting] Set [Page Number] between -99999 and 99999, and set [Chapter] between -100 and 100. Press [*] to switch over the signs (+ and -) of the setting. If a negative value is specified, the numbers are not printed until the numbering reaches 1. For example, if "-1" was specified, the numbers are printed starting with "1" on the third copied page. The entered chapter number is printed if [1-1, 1-2.] is selected under [Page Number Type].
Select the type (format) of the page. Set this parameter when using the Cover Sheet, Insert Sheet and Chapters functions together. [Cover Sheet] [Print on Front and Back Cover]: Prints on the front and back covers. [Print on Back Cover only]: Prints a page number on the back cover but not on the front cover. Page number printing starts with "2" for 1-sided copy and with "3" for 2-sided copy. [Do not print Page Number]: Disables printing on the front or back cover. Page number printing starts with "2" for 1-sided copy and with "3" for 2-sided copy. [Print Page #]: Prints on inserted pages. [Do Not Print #]: Counts but not prints on inserted pages. [Skip the Page(s)]: Disables counting and printing on inserted pages. [Do Not Print #]: Counts but not prints on inserted pages. [Skip the Page(s)]: Disables counting and printing on inserted pages.

[Insert Sheet (Copy)]

[Insert (Blank)]

[Print Position]

Select a position from the nine print position options. [Adjust Position] Adjust horizontal and vertical positions to be between 1/16 inch (0.1 mm) and 1-15/16 inch (50.0 mm).
To configure the settings for the Cover Sheet, Insert Sheet and Chapters functions: Press [Application] [Sheet/Cover/Chapter Insert]. To configure the settings for the Chapters function: Press [Application] [Sheet/Cover/Chapter Insert] [Chapters].

[Header/Footer]

This setting enables printing the date/time and text at the top or the bottom of the paper. The date/time or a distribution number can be printed on each page. The header and footer can contain predetermined contents, but you can also temporarily change the contents.
In order to use the Header/Footer function, a header/footer must be registered in advance in Administrator Settings. If no header/footer is registered in Administrator Settings, the [Header/Footer] menu does not appear. Press [Application] [Stamp/Composition] [Header/Footer].
Settings [Recall Header/Footer] [Check/Change Temporarily] Select a header/footer to be used. Check or temporarily change the contents of the registered header/footer. [Header Settings] [Footer Settings] Select to enable or disable printing of a header/footer. To print a header/footer, configure the following settings: [Text]: Enter the text for the header/footer. [Date/Time]: Select the type of date and time notation. [Other]: Select to print or not to print the distribution control number, job number, or serial number. Select to print the header/footer on all pages or only on the first page. Select the [Text Color], [Text Size] and [Text Type].
[Pages] [Text Details] [Reset]
Reset the settings to the initial contents.
To register a header/footer: Press the Utility/Counter key [Administrator Settings] [System Settings] [Stamp Settings] [Header/Footer Settings].

[Watermark]

You can print a watermark (light text) at the center of the paper. Select fixed preset text to be printed such as [Invalid Copy] and [Private]. Copying with a watermark enables explicit indication of the use of the copied paper. It also helps prevent unauthorized copy from the copied paper.
The watermark is printed on all pages at an angle of 45 degrees. It is printed once per page. In case other settings affect the watermark printing to cause partial loss, the Watermark function is canceled upon copying. Press [Application] [Stamp/Composition] [Watermark].

[Select Keyboard]

Factory default [Language Selection] [Measurement Unit Settings] [Auto Tray Selection Settings] [Auto Tray Switch ON/OFF] [No Matching Paper in Tray Setting] [Print Lists] [Auto Color Level Adjust.] [Low Power Mode Settings] [Sleep Mode Settings] [Print/Fax Output Settings] [Output Tray Settings] [English] This value varies depending on the area. [Tray Priority] [Tray 1] [Tray 2] [Tray 3] [Tray 4] When the optional paper tray is installed, [Tray 3] or [Tray 4] is displayed. [Restrict] [Stop Printing (Tray Fixed)] Tray 1 [1-Sided]
Standard (3) 15 min. 20 min. [Print]: [Page Print] [Fax]: [Batch Print] [Copy]: [Tray 2] [Print]: [Tray 2] [Print Reports]: [Tray 1] [Fax]: [Tray 1] [Output Tray Settings] is displayed when the Finisher FS-527 or Job Separator JS-505 is installed. [Tray 3] is displayed when the Job Separator JS-603 is installed in the Finisher FS-527. Standard (2) [Prohibit Copy] [Do Not Print] [Left & Right Bind: All the Same Top & Bottom Bind: All the Same] [Local Keyboard]
[AE Level Adjustment] [Auto Paper Select for Small Original] [Blank Page Print Settings] [Page Number Print Position] [Select Keyboard]
To enable Auto Paper: Press [Basic] [Paper] [Auto]. To enable Auto Color: Press [Basic] [Color] [Auto Color]. To configure Background Removal to Auto: Press [Quality/Density] [Background Removal] [Auto].
[Custom Display Settings]
Change the touch panel display to the convenience of the user.
Press the Utility/Counter key [User Settings] [Custom Display Settings].
Settings [Copier Settings] [Default Tab] Select either the standard Basic tab or the Quick Copy tab as the basic settings screen in Copy mode. Allows you to allocate shortcut keys for frequently used Application functions to be added to the basic settings screen. Pressing a shortcut key displays the desired setting screen. When the optional Image Controller IC-412 v1.1 is installed, only one shortcut key can be enabled. Allows you to register setting conditions for frequently used copy functions and place them on the basic settings screen. The registered setting condition can be invoked by only pressing the corresponding easy setting key. Specify whether to display the copy density setting in the basic settings screen. If [ON] is selected, you can press [Dark] or [Light] in the basic settings screen to adjust the copy density. If [ON] is selected, [Quick Settings 3] and [Quick Settings 4] cannot be specified.

[Power Save Settings]

Configure the settings for the power-saving mode.
Press the Utility/Counter key [Administrator Settings] [System Settings] [Power Save Settings].
Settings [Low Power Mode Settings] [Sleep Mode Settings] [Power Save Key] Enter a time period before switching to the lower power mode when this machine is not being operated. Enter a time period before switching to the sleep mode when this machine is not being operated. Configure the type of the power save function to be started when you press the Power Save key. [Low Power] [Sleep] Provides power-saving effect higher than normal. Provides power-saving effect higher than the low power mode. However, the machine must be warm-up when restarting operations, therefore taking more preparation time than the low power mode.

[Enter Power Save Mode]

Configure settings for switching to the power save mode after printing documents from computers or receiving faxes. [Normal] [Immediately] Enters the power save mode when the time specified in Low Power Mode Settings has elapsed. Enters the power save mode in a short time.
Factory default [Low Power Mode Settings] [Sleep Mode Settings] [Power Save Key] [Enter Power Save Mode] 15 min. 20 min. [Low Power] [Immediately]

[Output Settings]

Configure the settings for the output functions.
Utility/Counter key [Administrator Settings] [System Settings] [Output Settings].
Settings [Print/Fax Output Settings] This setting is for the print and fax operations. For details, refer to the [User's Guide Network Scan/Fax/Network Fax Operations] and [User's Guide Print Operations]. Configure an output tray given priority for outputting by function. This item is displayed if the Finisher FS-527 or Job Separator JS-505 is installed. Select whether to shift the output paper for each job. This item is displayed if the Finisher FS-527, Finisher FS-529, or Job Separator JS-505 is installed:

[Output Tray Settings]

[Print]

[Copy]
[Scanner Area] [ADF Adjustment] [Line Detection]
Adjust the scan range of the scanner. For details on displaying this item, contact your service representative. Make adjustments for scanning images in the ADF. For details on displaying this item, contact your service representative. [Prior Detection Setting] Configure whether to issue an alert when the Slit Scan Glass is dirty. Select an alert display format and contamination detection level. Configure whether to remove a dirt on the Slit Scan Glass each time one sheet of paper passes through the ADF when scanning an original using the ADF.

[Feed Cleaning Settings]

Configure special paper settings for [User Paper 1] through [User Paper 5]. Settings to configure include Basic Weight and Media Adjustment. For details on displaying this item, contact your service representative. [Non-Image Area Erase Operation Settings] Configure Non-Image Area operation settings. [Auto]: Automatically detects the background density of the original, and selects either [Bevel] or [Rectangular] accordingly. [Specify]: Allows you to manually specify an erase method and original density. As an erase method, select [Bevel] or [Rectangular]. Specify an original density from five levels.
Settings [User Paper Settings]

[Erase Adjustment]

Factory default [AE Level Adjustment] [Leading Edge Adjustment] [Centering] [Leading Edge Adjustment (Duplex Side 2)] [Centering (Duplex 2nd Side)] [Media Adjustment] [Center Staple Position] [Half-Fold Position] [Punch Horizontal Position Adjustment] [Punch Regist Loop Size Adjustment] [Paper Alignment Plate Settings] [Density Adjustment] [Image Stabilization Only] [Image Stabilization Setting] [Paper Separation Adjustment] [Color Registration Adjust] [Prior Detection Setting] Standard (2) 0.0 mm 0.0 mm 0.0 mm 0.0 mm [Auto] 0.0 mm 0.0 mm 0.0 mm 0 [Image Stabilization Only] [Standard] 0.0 mm 0 dot [Yes] [Warning Display]: [TYPE2] [Detection level]: [Std.] [Clean] [Erase Operation]: [Specify] [Erase Method]: [Rectangular] [Original Density]: [1]
[Feed Cleaning Settings] [Non-Image Area Erase Operation Settings]
[Leading Edge Adjustment]
Adjust the starting print position at the leading edge of each type of paper (with respect to the paper feed direction).
Press the Utility/Counter key [Administrator Settings] [System Settings] [Expert Adjustment] [Printer Adjustment] [Leading Edge Adjustment]. % To adjust the starting print position at the leading edge of the second side for 2-sided printing (with respect to the paper feed direction), press [Leading Edge Adjustment (Duplex Side 2)].
Select a paper type to be adjusted. Load the paper into the Bypass Tray. Press the Start key. A test pattern is printed. Check that the distance from the starting print position of the test pattern to the edge of the paper (a) is 4.2 mm. % Press [+] or [-] to adjust the width. Press the Start key to print a test pattern.

Press [OK].

a:4.2mm

[Centering]

Adjust the starting print position at the left edge of each paper tray (with respect to the paper feed direction). 0 Only 8-1/2 e 11 v (A4 v) paper can be used to adjust the Bypass Tray. Press the Utility/Counter key [Administrator Settings] [System Settings] [Expert Adjustment] [Printer Adjustment] [Centering]. % To adjust the starting print position at the left edge of the second side for 2-sided printing (with respect to the paper feed direction), press [Centering (Duplex 2nd Side)].
Select a paper tray to be adjusted. Press the Start key. A test pattern is printed. Check that the distance from the starting print position of the test pattern to the left edge of the paper (b) is 3.0 mm (0.5 mm). % Press [+] or [-] to adjust the width. Press the Start key to print a test pattern.

b:3.0mm0.5mm

[Media Adjustment]
Adjust defective print images caused by paper type features.
Press the Utility/Counter key [Administrator Settings] [System Settings] [Expert Adjustment] [Printer Adjustment] [Media Adjustment]. Select a paper type to be adjusted. % If defective images exist on the back side of 2-sided copy paper, select [2nd Side]. Press [+] or [-] to specify an adjusted value. % If missing parts or white spots exist in print images, press [-]. If the surface of the print image is rough, press [+].
Press [OK] [Close]. Copy, and then check the print image.

[Center Staple Position]

Adjust the stapling position for each paper size when printing with the center staple function.
Adjust the half-fold position before adjusting the center stapling position. Before making any adjustments, create a sample using the center staple function. Adjust the center staple position while checking the created sample. This adjustment is available if the Saddle Stitcher SD-509 is installed. When stapling in parallel with the left edge of paper, contact your service representative. Press the Utility/Counter key [Administrator Settings] [System Settings] [Expert Adjustment] [Finisher Adjustment] [Center Staple Position]. Select the size of paper of which the center staple position is adjusted. Press [+] or [-] to adjust the staple position while checking the sample. Press [OK]. Create a sample, and check the print result.
To adjust the half-fold position: Press the Utility/Counter key [Administrator Settings] [System Settings] [Expert Adjustment] [Finisher Adjustment] [Half-Fold Position].

[Half-Fold Position]

Adjust the center staple & fold and half-fold positions for each paper size.

[OFF] [No] [No] [No]

Factory default [Job History Thumbnail Display] [Secure Print Only] [Copy Guard] [Password Copy]

7.10.5

[Enhanced Security Mode]
The enhanced security mode cannot be enabled when any of the current functional settings conflict with the enhanced security mode. When the enhanced security mode is enabled, the settings required for the mode or the settings that have been forcibly switched when entering the mode cannot be changed.

Required settings

To enable the enhanced security mode, the following settings must have been configured. Administrator Settings [User Authentication/Account Track] / [General Settings] / [User Authentication] Required settings Select either [ON (External Server)] or [ON (MFP)]. When you enable account track, select [Account Name & Password] for the account track input method. Set a password complying with password rules. Specify a HDD encryption passphrase. [Image Controller Setting] [Management Function Choice] [CE Password] [CE Authentication] [HDD] All the settings above must be configured by your service representative. Set [Mode using SSL/TLS] to [Admin. Mode] and [User Mode]. Set [Encryption Strength] to [AES-256] or [3DES-168].
[Security Settings] / [Administrator Password] [Security Settings] / [HDD Settings] / [HDD Encryption Setting] [Security]/[PKI Settings]/[SSL Setting] in PageScope Web Connection
These items must be configured by your service representative. For details, contact your service representative.
Settings to forcibly changed
When the enhanced security is enabled, the following settings are forced. The changed settings will not revert when the enhanced security mode is turned off. After the password rules have been changed, any passwords that do not comply with the changed rules will not be authenticated. For details on the password rules, refer to page 7-46. For details on the network settings to be forcibly changed, refer to the [User's Guide Network Scan/Fax/Network Fax Operations]. Administrator Settings [System Settings] / [Restrict User Access] / [Restrict Access to Job Settings] / [Registering and Changing Addresses] [User Authentication/Account Track] / [General Settings] / [Public User Access] [User Authentication/Account Track] / [User Authentication Settings] / [Administrative Settings] / [User Name List] [User Authentication/Account Track] / [Print without Authentication] Settings to forcibly changed Set to [Restrict].

If a tray has run out of paper during printing, the message [Replenish paper or select another paper tray.] appears. Load paper in the paper tray that is highlighted in color.
Precautions regarding the use of paper
Do not use the following types of paper. Not observing these precautions may lead to reduced print quality, a paper jam or a damage to the machine. OHP transparencies that have already been fed through the machine (even if they are still blank) ) Paper that has been printed on with a heat-transfer printer or an inkjet printer Folded, curled, wrinkled, or torn paper Paper that has been left unwrapped for a long period of time Damp paper, perforated paper, or paper with punched holes Extremely smooth or extremely rough paper, or paper with an uneven surface Paper that has been treated, such as carbon-backed, heat-sensitive or pressure-sensitive paper Paper that has been decorated with foil or embossing Paper of a non-standard shape (paper that is not rectangular) Paper that is bound with glue, staples or paper clips Paper with labels attached Paper with ribbons, hooks, buttons, etc., attached

Paper storage

Store paper in a cool, dark location with little humidity. If the paper becomes damp, a paper jam may occur. Store the paper flat, not on its edge. Curled paper may cause a paper jam.

Loading paper

This section describes how to load paper into each tray. If printing stops due to the tray being empty, load paper into the tray. Printing restarts automatically. For the types of paper to be used, refer to page 12-2.
Loading paper in Tray 1, Tray 2, Tray 3, or Tray 4
The procedure for loading paper is common between Tray 1, Tray 2, Tray 3, and Tray 4. The following procedure describes how to load paper into Tray 1. Tray 3 and Tray 4 are optional. When [Auto Detect] is selected on the [Paper] tab, the size of loaded paper is automatically detected. Pull out Tray 1. % 1. Film
Be careful not to touch the Film.
Slide the Lateral Guide to fit the size of paper being loaded. % If the Lateral Guide are not positioned correctly for the loaded paper, the paper size will not be correctly detected.
Load the paper into the tray so that the side of the paper to be printed on (the side facing up when the package was unwrapped) faces up. % Do not load so many sheets of paper that the top of the stack is higher than the mark. % If paper is curled, flatten it before loading it. % If special paper is loaded, the paper type must be specified. % Load letterhead paper so that the side to be printed on faces down.

Message [Replenish paper.] [Toner (Y) is low. Replace when indicated.]
[Replace toner cartridge (Y).]
The toner is about to run out.
[Toner is depleted. Replace the toner cartridge following the guidance (explanation). Press the [Continue] button to continue the operations.] [No more staples. Replace the staple cartridge, or cancel stapling.] [Misfeed detected. Remove paper according to the instructions.] [Empty the hole-punch scrap box. To continue the job, cancel punching.] [Reset the following number of originals.]

Toner is depleted.

The staples have run out.
Replace the Staple Cartridge.
Since a paper jam occurred, the machine is unable to make copies. (1) The hole-punch scrap box is full. (2)The Punch Scrap Box is not installed. After clearing a paper jam, it is necessary to reload certain pages of the original that have already been fed through the ADF. The machine malfunctioned and is unable to make copies.

Clear the jammed paper.

Throw punch scraps away from the Punch Scrap Box. Install the Punch Scrap Box. Load the indicated original pages into the ADF.
[An internal error occurred. Open and then close the front door to remedy a problem. If the trouble code appears again, contact your Service Rep.] [An internal error occurred. Turn the main switch OFF and ON. If the trouble code appears again, contact your Service Rep.] [Malfunction detected. Please call your Service Representative.] [Clean the original glass on the left with the glass cleaner. Continuing using the machine in this condition may cause lines to appear in the output.] [Now Downloading Program Data from the Firmware server.]
Take a remedy according to the message displayed in the screen. If the problem is not resolved or released, inform your service representative of the malfunction code displayed in the screen.
The machine malfunctioned and is unable to make copies. The Slit Scan Glass is dirty.
Inform your service representative of the code displayed in the screen. Use the Slit Glass Cleaner to clean it.

Paper loading capacity <Output Tray 1>
Paper loading capacity <Output Tray 2>

Group/Sort

Plain paper (1515/16 lb to 23-15/16 lb (60 g/m2 to 90 g/m2))
8-1/2 e 11 w, A4 w or less 8-1/2 e 14 w, B4 w or more 5-1/2 e 8-1/2 w, A5 w or less
3000 sheets 1500 sheets 500 sheets 20 sheets
Thick (24-3/16 lb to 79-13/16 lb (91 g/m2 to 300 g/m2)), Transparency, Envelope, Label sheet, Letterhead Offset Group/Offset Sort Plain paper (1515/16 lb to 23-15/16 lb (60 g/m2 to 90 g/m2)) Plain paper (1515/16 lb to 23-15/16 lb (60 g/m2 to 90 g/m2)) 8-1/2 e 11 w, A4 w or less 8-1/2 e 14 w, B4 w or more 5-1/2 e 8-1/2 w, A5 w or less
3000 sheets 1500 sheets 500 sheets

Staple

2 to 9 sheets: 100 copies* * 8-1/2 e 14 w, B4 w or more: 50 copies 10 to 20 sheets: 50 copies 21 to 30 sheets: 30 copies 31 to 40 sheets: 25 copies 41 to 50 sheets: 20 copies
Paper loading height: 14-3/4 (375 mm) (8-1/2 e 11 w, A4 w or less) / 7-3/8 (187.5 mm) (8-1/2 e 14 w, B4 w or more)
Plain paper (15-15/16 lb to 23-15/16 lb (60 g/m2 to 90 g/m2)): 50 sheets Thick (24-3/16 lb to 31-15/16 lb (91 g/m2 to 120 g/m2)): 30 sheets Thick (32-3/16 lb to 55-5/8 lb (121 g/m2 to 209 g/m2)): 15 sheets Example number of stapled sheets: Thick (55-5/8 lb (209 g/m2)) 2 sheets + Plain paper (23-15/16 lb (90 g/m2)) 48 sheets 1-3/16 (30 mm) Supply from machine 56 W or less Width 20-13/16 (528 mm), 25-7/8* (658 mm*) Depth 25-1/4 (641 mm) Height 40-3/8 (1025 mm), 42-13/16* (1087 mm*) * Size when the tray is pulled out Approx. 92-9/16 lb (42 kg) Staple SK-602 For EH-590 (Product No. 505 manufactured by MAX) (5000 staples included) e 1 unit
Specifications Maximum number of stapled sheets
Shift amount Power supply Max. power consumption Size

Weight Consumables

Saddle Stitcher SD-509
Specifications Feeding function Paper Type Center Staple & Fold, Half-Fold Plain paper (15-15/16 lb to 23-15/16 lb (60 g/m2 to 90 g/m2)) Thick (24-3/16 lb to 55-5/8 lb (91 g/m2 to 209 g/m2))* * Can be used only as a cover page. 12-1/4 e 18 w, 11e 17 w, 8-1/2 e 14 w, 8-1/2 e 11 w, A3 w, B4 w, A4 w Width: 8-1/4 to 12-1/4 (210 mm to 311.15 mm), Length: 11 to 18 (279.4 mm to 457.2 mm) 15 sheets 14 sheets (15-15/16 lb to 23-15/16 lb (60 g/m2 to 90 g/m2)) + 1 sheet (15-15/16 lb to 55-5/8 lb (60 g/m2 to 209 g/m2)) 3 sheets Number of stapled and folded sheets 1 to 3 sheets 4 to 10 sheets 11 to 15 sheets Size Width 9-7/16 (239 mm) Depth 22-13/16 (579 mm) Height 21 (534 mm) Approx. 52-15/16 lb (24 kg) Staple SK-602 For EH-280 (Product No. 505 manufactured by MAX) (5000 staples included) e 2 unit Supplied from Finisher FS-527. 20 copies 10 copies 5 copies

Specifications Name Applied finger width Interface Dimensions AU-101 3/8 (10 mm) to 1 (25 mm) USB 2.0 Width 3-1/16 (78 mm) Depth 3-3/4 (95 mm) Height 2-3/16 (55 mm) Approx. 5/16 lb (Approx. 150 g) (excluding USB cable) DC 5 V 500 mA 50 F to 95 F (10 C to 35 C) 10% to 80% (No dew condensation) 14 F to 140 F (-10 C to 60 C) 10% to 80% (No dew condensation)
Weight Max. power consumption (mA) System conditions (during operation) System conditions (during non-operation) Ambient temperature Humidity Ambient temperature Humidity
CPU Memory HDD Monitor Network Application Interface PC/AT compatible, 1 GHz or more 128 MB or more 100 MB or more 800 e 600 pixels, 16-bit color or more TCP/IP Microsoft Internet Explorer 6.0 (SP1) or later Microsoft.NET Framework (SP1) or later USB 1.1 or later Windows 2000 Professional (SP4) Windows XP Professional Edition (SP2) Windows Vista Business/Enterprise
Specifications Compatible computer
Supported Operating Systems
Specifications Name Biometric sensor system Verification time Interface Dimensions AU-102 Transmission-type optical system Approx. 1 sec. or less USB 2.0 Width 2-5/16 (59 mm) Depth 3-1/4 (82 mm) Height 2-15/16 (74 mm) Approx. 3/16 lb (Approx. 96 g) (excluding USB cable) DC 5 V 500 mA 41 F to 95 F (5 C to 35 C) 20% to 80% (No dew condensation) 32 F to 122 F (0 C to 50 C) 20% to 80% (No dew condensation) PC/AT compatible, 1 GHz or more 128 MB or more 100 MB or more 800 e 600 pixels, 16-bit color or more TCP/IP Microsoft Internet Explorer 6.0 (SP1) or later Microsoft.NET Framework (SP1) or later USB 1.1 or later Windows 2000 Professional (SP4) Windows XP Professional Edition (SP2) Windows Vista Business/Enterprise
Weight Max. power consumption (mA) System conditions (during operation) System conditions (during non-operation) Compatible computer Ambient temperature Humidity Ambient temperature Humidity CPU Memory HDD Monitor Network Application Interface Supported Operating Systems
Specifications Name Dimensions AU-201 Width 3-5/8 (92 mm) Depth 2-1/2 (64 mm) Height: 5/8 (16 mm) Approx. 1/4 lb (Approx. 120 g) Power received from USB port Ambient temperature Humidity Ambient temperature Humidity 32 F to 104 F (0 C to 40 C) 20% to 85% (No dew condensation) -4 F to 122 F (-20 C to 50 C) 20% to 85% (No dew condensation) Self-guided read-write communication facility ISO 14443 Type A, FeliCa-based noncontact IC card, HID iClass VCCI class B CPU Memory HDD Monitor Network Application Interface Supported Operating Systems PC/AT compatible, 1 GHz or more 128 MB or more Free space: 100 MB or more 800 e 600 pixels, 16-bit color or more TCP/IP Microsoft Internet Explorer 6.0 (SP1) or later Microsoft.NET Framework (SP1) or later USB 1.1 or later Windows 2000 Professional (SP4) Windows XP Professional Edition (SP2) Windows Vista Business/Enterprise

Auto Zoom [Background Color] [Background Removal] [Binding Position]
[Blue] [Brightness] [Card Shot]
[Center Staple & Fold] [Change Tray Settings] [Color Adjust] [Color Balance]
[Color] Combine Originals
[Contrast] [Copy Density] [Copy Guard]

[Cover Sheet] [Density]

Description Function to use when copying on paper that has already been printed on one side. Function to specify the scanning side of the original and the printing side of the paper to be 1-sided or 2-sided. Function that configures the image according to the objectives of copy editing. Allows you to select how to sort or finish copies when feeding them into the output tray. Function that allows you to check the finishing status with a preview image before printing. Allows you to select a preset offset or finishing method. Function that improves the glossy level of an image. Function that adjusts the level of green in the image, for example, if you wish to emphasize the green of forests and trees. Function that limits the addresses that can be accessed by each user in order to assure security. Function that prints copies in pages. This function first prints the specified number of copies of the first page, and then prints the second page in the same way. Function that folds printed paper in half. Function that adjusts the hue level to make the image either more reddish or more bluish. Function that enlarges or reduces the loaded original with the zoom ratio specified using the keypad, and copies it on paper. This setting slightly reduces the image of the original and copies it at the center of the paper. Function that produces a copy in the mirror image of the original. Function that detects the size of each original page and prints a copy on paper of the appropriate size when loading originals in different page sizes into the Reverse Automatic Document Feeder. Function that copies the original with the light- and dark-colored areas or the colors (gradations) of the image reversed. Function that sorts copies. Function that inserts a blank sheet between transparency films each time a transparency film is copied. This function prevents transparency films from sticking together. Function that specifies the orientation of the original loaded into the ADF or placed on the Original Glass. Function that allows you to select the desired functions according to the original text or image type and adjust it to obtain better image quality. Allows you to configure the type and the size of the paper to be printed on. To prevent unauthorized copying, this function prints a text such as Copy or Private or information such as Date/Time on all pages of paper as a password when copying. When a sheet of paper with a password embedded is copied, the currently running job is suspended, and the password entry screen is displayed. In this case, enter the password to copy data. Function that prints a sample copy and stops printing temporarily before printing a large number of copies. This prevents copy errors from occurring in a large number of copies. Function that punches copies for filing. Function that adjusts the level of red in the image, for example, if you wish to redden skin tones. That adjusts the degree of vividness of the colors in the image. Function that temporarily saves the job on the hard disk so that it can be recalled later and used again.