Lexmark Z22/Z32

Color Jetprinter

Users Guide for Windows 95 and 98, and Mac OS 8.6 and 9
Edition: April 2000 The following paragraph does not apply to any country where such provisions are inconsistent with local law: LEXMARK INTERNATIONAL, INC., PROVIDES THIS PUBLICATION AS IS WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Some states do not allow disclaimer of express or implied warranties in certain transactions; therefore, this statement may not apply to you. This publication could include technical inaccuracies or typographical errors. Changes are periodically made to the information herein; these changes will be incorporated in later editions. Improvements or changes in the products or the programs described may be made at any time. References in this publication to products, programs, or services do not imply that the manufacturer intends to make these available in all countries in which it operates. Any reference to a product, program, or service is not intended to state or imply that only that product, program, or service may be used. Any functionally equivalent product, program, or service that does not infringe any existing intellectual property right may be used instead. Evaluation and verification of operation in conjunction with other products, programs, or services, except those expressly designated by the manufacturer, are the users responsibility. ColorFine, Lexmark, and Lexmark with diamond design are trademarks of Lexmark International, Inc., registered in the United States and/or other countries. Color Jetprinter is a trademark of Lexmark International, Inc. AppleTalk, iMac, Mac OS, and Macintosh are trademarks of Apple Computer, Inc., registered in the United States and/ or other countries. Other trademarks are the property of their respective owners. Copyright 2000 Lexmark International, Inc. All rights reserved. UNITED STATES GOVERNMENT RESTRICTED RIGHTS This software and documentation are provided with RESTRICTED RIGHTS. Use, duplication or disclosure by the Government is subject to restrictions as set forth in subparagraph (c)(1)(ii) of the Rights in Technical Data and Computer Software clause at DFARS 252.227-7013 and in applicable FAR provisions: Lexmark International, Inc., Lexington, KY 40550.

Contents

Basic printing for Windows 1 Step 1: Load the paper 1 Step 2: Customize the printing options 3 Step 3: Print your document 6 Basic printing for Macintosh 7 Step 1: Load the paper 7 Step 2: Customize the printing options 9 Step 3: Print your document 14 Maintaining your printer 15 Using the Control Program in Windows 15 Using the Control Panel in Macintosh 16 Installing or replacing print cartridges 17 Improving print quality 18 Troubleshooting 23 Printer prints slowly or doesnt print 23 Paper misfeeds or jams 26 Document prints with mistakes or poor quality 27 Problems with transparencies, photos, or envelopes 29 Error messages and flashing lights 30
Appendix 31 Installing printer software 31 Uninstalling printer software for Windows 33 Uninstalling printer software for Macintosh 33 Printing from DOS 33 Electronic emission notices 33 Energy Star 34 Power supply information 34 Safety information 34 Statement of limited warranty 35 Index 37
Basic printing for Windows
This chapter describes how to use your printer with Windows 95 and Windows 98. For help using your printer with Mac OS 8.6 or Mac OS 9, see page 7. For help using your printer with Windows NT 4.0 or Windows 2000, refer to the Users Guide button on the Printer Software CD. Basic printing is as easy as: 1 Load the paper (see next section) 2 Customize the printer settings (see page 3) 3 Print your document (see page 6)

Step 1: Load the paper

1 Place up to 100 sheets of paper (depending on thickness) against the right side of the sheet feeder, with the print side facing you. To load specialty paper, see page 2.
Paper alignment marks Sheet feeder Release tab Paper guide
2 Squeeze the release tab and the paper guide together and slide the paper guide to the edge of the paper.

Loading specialty paper

Load up to: 10 envelopes Make sure: The print side is facing you. The stamp location is in the upper left corner. The envelopes are loaded vertically against the right side of the sheet feeder. The paper guide is against the side of the envelopes. 10 greeting cards, index cards, postcards, or photo cards 25 sheets of photo paper, glossy paper, or coated paper 20 sheets of banner paper The print side is facing you. The cards are loaded vertically against the right side of the sheet feeder. The paper guide is against the side of the cards. The glossy or coated side is facing you. The paper guide is against the side of the photo paper. You place the banner paper behind the printer. Then bring the unattached edge of the first page over the printer and into the sheet feeder. The paper guide is against the side of the paper.

When you are printing on: Envelopes Click this tab: Paper To make these selections: From the Paper Size area, scroll to select the appropriate envelope size.
Note: Many applications are designed to override the envelope settings in Printer Properties. Make sure landscape orientation is selected in your application.
Greeting cards, index cards, postcards, or photo cards

Document/Quality

From the Paper Type area, select Greeting Card Stock. Select the appropriate Paper Size setting. From the Paper Type area, select Glossy/Photo Paper.
Notes: If you are using two cartridges, you can print quality photos with the black and color cartridge combination. However, for the best possible photo quality, replace the black cartridge, Lexmark part number 17G0050, with a photo cartridge, Lexmark part number 12A1990. For help, see page 17. When printing photos, remove each photo as it exits from the printer and allow it to dry before stacking.
Paper Photo, glossy, or coated paper Document/Quality

Banner paper

From the list of Paper Sizes, select Banner or Banner A4.
When you are printing on: Sheets of custom size paper

Click this tab: Paper

To make these selections: From the list of Paper Sizes, scroll to select Custom. Enter the dimensions for your custom paper size. For help, see Loading specialty paper on page 2.

Iron-On transfers

From the Paper Type area, select IronOn Transfer.
Note: To ensure that the iron-on transfer will print correctly, you may want to print on plain paper before printing on an iron-on transfer.

Transparencies

From the Paper Type area, select Transparency. Select Normal 600dpi or High 1200dpi Print Quality.
Note: When printing transparencies, remove each transparency as it exits from the printer and allow it to dry before stacking.
Step 3: Print your document
1 From your applications File menu, click Print. 2 From the Print dialog box, click OK or Print (depending on the application).

Note: The Lexmark Z22 ships with a High Resolution Color cartridge only. You can instantly improve print speed and print quality by simply adding an optional Waterproof Black Cartridge (P/N 17G0050).
Basic printing for Macintosh
Basic printing for Macintosh This chapter describes how to use your printer with Mac OS 8.6 and Mac OS 9. For help using your printer with Windows 95 or Windows 98, see page 1. For help using your printer with Windows NT 4.0 or Windows 2000, refer to the Users Guide button on the Printer Software CD. Basic printing is as easy as: 1 Load the paper (see next section) 2 Customize the printing options (see page 9) 3 Print your document (see page 14)
1 Place up to 100 sheets of paper (depending on thickness) against the right side of the sheet feeder, with the print side facing you. To load specialty paper, see page 8.
Load up to: 10 envelopes Make sure: The print side is facing you. The stamp location is in the upper left corner. The envelopes are loaded vertically against the right side of the sheet feeder. The paper guide is against the side of the envelopes. 10 greeting cards, index cards, postcards, or photo cards 25 sheets of photo paper, glossy paper, or coated paper 20 sheets of banner paper The print side is facing you. The cards are loaded vertically against the right side of the sheet feeder. The paper guide is against the side of the cards. The glossy or coated side is facing you. The paper guide is against the side of the paper. The print side is facing you, and then place the banner paper behind the printer. Then bring the unattached edge of the first page over the top of the printer and into the sheet feeder. The paper guide is against the side of the paper.
Note: Select Banner (Letter) or Banner (A4) Paper Size in the Lexmark Z22/Z32 Page Setup dialog box. For help, see page 11.
The print side is facing you and the paper guide is against the side of the paper. Your paper size fits within these dimensions: - Length - Width: 127 mm to 432 mm 76 mm to 215.9 mm 5.0 in. to 17.0 in. 3.0 in.to 8.5 in.

Chapter 2

Your printer software works with your operating system to help you print documents with superior results. To customize your printing options, you will need to use the Page Setup dialog box and the Print dialog box.

Page Setup

Click the Help button to access the printer driver help. Click this pop-up menu to select a paper size.
From the pop-up menu, choose: General Select: Paper Size Scaling Orientation Watermark Watermarks
Click one of these to select the page orientation.
When you want to: view the available paper sizes. change the scaling value of the document. Valid values are between 25% and 400%. choose between portrait and landscape modes. choose the watermark you want.
Click the Help button to access the printer driver help.
Click this pop-up menu to select print settings.
This area displays a summary of the current settings.
From the pop-up menu, choose: General
Select: Copies Pages Print Last Page First Wait for pages to dry
When you want to: type in the number of copies (1-99). print all pages or a given page range. print the pages in the reverse order. add more time between pages as they exit the printer. select Plain Paper, Coated Paper, Glossy/Photo Paper, Transparency, or IronOn Transfer. select Quick Print (600 dpi), Normal (600 dpi), or High (1200 dpi).

Paper Type/Quality

Paper Type

Print Quality

10 Chapter 2
From the pop-up menu, choose: Color
Select: ColorSync Color Matching Built-in Color Matching
When you want to: select a printer profile to match the color on the screen to the color in the document. let the printer driver match the color on the screen to the color in the document. print quickly.
Note: Do not use your system while the document is printing.

Background Printing

Print in Foreground

Print in Background

print most documents. select an exact date and time for the document to print. mark a print job as Urgent. put a print job on hold.
Note: You may use your system while the document is printing.
Changing the page settings

Push back firmly on the cartridge until it snaps securely into place.

Warning: DO NOT

touch the gold contact area of the print cartridge.
Maintaining your printer 17
Notes: If you installed a Lexmark Z32 printer driver, both cartridges must be installed before you can print. If you installed a combined Lexmark Z22/Z32 printer driver, you can print with either the black or color cartridge. It is not necessary to install two cartridges for printing. For the best possible photo quality, print with a photo and color cartridge combination in your printer. To replace the black cartridge with a photo cartridge, see page 17. The Lexmark Z22 ships with a High Resolution Color cartridge only. You can instantly improve print speed and print quality by simply adding an optional Waterproof Black Cartridge (P/N 17G0050).
5 Close the front cover. 6 Open the Control Program for Windows or the Control Panel for Macintosh. 7 From the Cartridges tab, select Install/Change Cartridge. 8 Select the type of cartridge you installed and click OK. 9 If you installed a new cartridge, the Alignment dialog box displays. Follow the instructions on the Alignment screen to complete the cartridge installation. For help, see the next section.

Improving print quality

If your print quality is not satisfactory, you may need to align your print cartridges or clean the print nozzles.
Aligning print cartridges
1 Load plain paper in the printer. 2 Open the Control Program for Windows or the Control Panel for Macintosh. 3 From the Cartridges tab, select Align Cartridges. For help, see page 15 or 16. 18 Chapter 3
Your printer prints an alignment test page and the Align Cartridge dialog box displays. The test page that prints has alignment pattern(s), depending on the cartridge combination installed. Each pattern has a number under it. The test page that prints is similar to the one shown: Maintaining your printer
4 From each alignment group on the test page, find the number under the alignment pattern that comes closest to forming a straight line. For example, in sample group A, the arrow points to the pattern that comes closest to forming a straight line. 5 In the Align Cartridges dialog box, enter the pattern numbers from the printed test page that come closest to forming a straight line. 6 After you have entered a number for all of the patterns, click OK.

Cleaning print nozzles

1 Load plain paper in the printer.
Maintaining your printer 19
2 Open the Control Program for Windows or the Control Panel for Macintosh. 3 From the Cartridges tab, select Clean Print Nozzles. For help, see page 15 or 16. The printer feeds a sheet of paper and prints a nozzle test pattern similar to the one shown:
Broken lines at the top of the page indicate clogged nozzles.

Purge lines print when ink is forced through the print nozzles to unclog them.
Unbroken lines at the bottom of the page indicate the nozzles were cleaned.
If you installed these cartridges: Black only Color only Black and Color Photo and Color
These purge lines will print: 1 purge line 3 purge lines 4 purge lines 6 purge lines
4 Compare the diagonal line above the printed bars to the diagonal line below the printed bars. Look for a break in the diagonal lines above the printed bars. A broken line indicates clogged nozzles.

20 Chapter 3

If the bottom line still has breaks, run the test up to two more times. If the print quality is satisfactory after running the test three times, the print nozzles are clean. You do not need to complete the remaining steps. If the print quality of both lines is not satisfactory after running the test three times, continue with step 4. 5 Remove and reinstall the print cartridge. 6 Repeat the nozzle test. 7 If the lines are still broken, wipe the print cartridge nozzles. For help, see the next section.
Wiping print nozzles and contacts
If print quality does not improve after cleaning the print nozzles (see page 19), there may be dried ink on the nozzles. You may also need to clean the print cartridge contacts if you have cleaned and wiped the print nozzles, but print quality is still unsatisfactory. For help on wiping the print nozzles or cleaning the print cartridge contacts, see the Troubleshooting: Print Quality Problems section of the printer driver Help. For help accessing the printer driver Help, see page 15 or 16.
Preserving print cartridges
To ensure the longest life from your print cartridge and optimum performance from your printer: Keep a new print cartridge in its packaging until you are ready to install it.
Maintaining your printer 21
Do not remove a print cartridge from the printer except to replace, clean, or store it in an air-tight container. The print cartridge will not print correctly if removed from the printer and left exposed for an extended period of time. Lexmarks printer warranty does not cover repair of failures or damage caused by a refilled cartridge. Lexmark does not recommend use of refilled cartridges. Refilling cartridges can affect print quality and cause damage to the printer. For best results, use Lexmark supplies.

Printer ejects a blank page after appearing to print

Make sure:

Warning: Do not touch the gold contact area of the print cartridge.
You have removed the sticker and transparent tape from the bottom of the print cartridges. For help, see page 17. Your Lexmark printer is set as the default printer.
Printer prints very slowly
Close any open applications not in use. Decrease the print quality setting. For Windows, consider purchasing more memory. For Macintosh, consider purchasing more memory, or increasing the virtual memory for your computer.

24 Chapter 4

Note: If you are printing photos or your document
contains graphics, it may take longer to print than regular text.
Printer is plugged in but doesnt print, or you get a Printer Offline message
Make sure: The printer is turned On and the paper is loaded correctly. The parallel or USB cable is completely plugged into the printer. The printer is set as the default printer. For Windows, the print job is not being held or paused in the print queue. To check the printer status in Windows: 1 From the Printers folder, double-click the Lexmark Z22/Z32 icon. 2 Click the Printer menu and make sure no check mark appears next to the Pause Printing option. For Macintosh, the print job is not being held. To check the job status in Macintosh: 1 From the desktop, double-click the Lexmark Z22/Z32 icon. 2 From the menu bar, choose Printing. 3 Choose Start Print Queue. Print a test page. If the test page prints, the printer is functioning properly. Check your application.

Test page does not print

Make sure: Your print cartridges are properly installed. For help, see page 17. The printer is set as the default printer.
You are using the correct cable. If you are using a parallel cable, make sure it is an IEEE 1284-compliant parallel cable that supports bidirectional printing.

Paper misfeeds or jams

Paper misfeeds or multiple sheets feed through the printer
Make sure: You are using a paper recommended for inkjet printers. You do not force the paper down into the printer when you load it. Align the top of the paper with the paper alignment guides on the paper support. You do not load too much paper in the sheet feeder. Depending on the thickness of your paper, the sheet feeder can hold up to 100 sheets of paper. The left paper guide does not cause the paper to bow in the sheet feeder. The printer is on a flat, level surface.

Printer has a paper jam

Try removing the paper from the sheet feeder. If the paper is lodged too far into the printer and cant be removed: Press the Power button to turn the printer Off. Press the Power button to turn the printer back On. If the printer does not eject the page, turn the printer Off. Pull firmly on the paper to remove it. If you cannot reach the paper because it is too far into the printer, raise the front cover and pull the paper out. 5 Close the front cover. 6 Press the Power button to turn the printer On. 7 Resend your document to print.

26 Chapter 4

Printer does not feed envelopes or specialty paper
If regular paper feeds without problems, make sure: You are loading the envelopes correctly. For help, see "Loading specialty paper"on page 2. You are using an envelope size supported by your printer, and it is selected in Printer Properties for Windows and in Page Setup for Macintosh. Your application is designed to print envelopes. Check the users documentation that came with your application.
Document prints with mistakes or poor quality
Print quality is poor at the left, right, top, or bottom edge of page
Like other printers, your printer cannot print in the extreme left, right, top, or bottom edges of a page. Use these minimum settings: Left and right margins: 6.35 mm (0.25 in.) each for all paper sizes except A4 For A4 size paper - 3.37 mm (0.133 in.) each Top and bottom margins: Top - 1.7 mm (0.067 in.) Bottom - 12.7 mm (0.5 in.) for most jobs 19 mm (0.75 in.) for best print quality for color jobs
Vertical straight lines are not smooth
To improve the print quality of vertical straight lines in tables, borders, and graphs: Select a higher Print Quality setting. For help, see pages 3, 9.
Test the cartridge alignment. For help, see page 18. Clean the print nozzles. For help, see page 19.
Print is too dark or smudged
Make sure: You let the ink dry before handling the paper. The Paper Type setting matches the paper type loaded in the printer. The paper is straight and unwrinkled. The print quality setting is appropriate for the paper type. If you are printing on regular paper, select the Quick Print 600dpi Print Quality setting. You may need to clean the print nozzles. For help, see page 19.
Printed pages have alternating bands of light and dark print (intermittent printing)
Make sure Enable Buffer Mode is checked on the Options tab of the Control Program for Windows. Select the High 1200dpi Print Quality setting on the Document/Quality tab of Printer Properties for Windows and on the Page Setup dialog box for Macintosh. Your printer may have two-way communications problems. For help, see page 23.

1 Open the Printer Properties
or the Control Program. For help, see Changing the Printer Properties from an application on page 4 or Using the Control Program in Windows on page 15.

Programs.

2 Select Lexmark Z22/Z32

Series.

2 Click the Help button in the
lower-right corner of the software screen.

3 Select Lexmark Z22/Z32

Series Uninstall.
4 Follow the instructions on
your screen. To reinstall the printer software, follow the appropriate set of instructions from Installing printer software on page 31.
3 At the top of the Help screen,

click Help Contents.

4 Scroll down the screen to

How to.

5 From the How to. topics,
click Print from Windows and DOS applications.
Uninstalling printer software for Macintosh
If your printer software does not install properly, you may need to uninstall, and then reinstall the software. To uninstall the printer software:
Electronic emission notices
Federal Communications Commission (FCC) compliance information statement
The Lexmark Z22/Z32 Color Jetprinter has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause
1 Drag the printer icon to the
trash can on the desktop.
2 Insert the software CD.
The Lexmark Z22/Z32 Installer screen appears.
3 Click Install and Agree.
cables or by unauthorized changes or modifications to this equipment. Unauthorized changes or modifications could void the user's authority to operate this equipment. Note: To assure compliance with FCC regulations on electromagnetic interference for a Class B computing device, use a properly shielded and grounded cable such as Lexmark part number 1329605 for parallel attach or 43H5856 for USB attach. Use of a substitute cable not properly shielded and grounded may result in a violation of FCC regulations. Any questions regarding this compliance information statement should be directed to: Director of Lab Operations Lexmark International, Inc. 740 West New Circle Road Lexington, KY 40550 (859) 232-3000
and harmonization of the laws of the Member States relating to electromagnetic compatibility and safety of electrical equipment designed for use within certain voltage limits. A declaration of conformity with the requirements of the Directive has been signed by the Director of Manufacturing and Technical Support, Lexmark International, S.A., Boigny, France. This product satisfies the Class B limits of EN 55022 and safety requirements of EN 60950.

Statement of limited warranty
Lexmark International, Inc., Lexington, KY
This warranty applies to the United States and Canada. For customers outside the U.S. and Canada, refer to the countryspecific warranty information that came with your printer.
If this product is a feature or option, this statement applies only when that feature or option is used with the product for which it was designed. To obtain warranty service, you may be required to present the feature or option with the product. If you transfer this product to another user, warranty service under the terms of this statement is available to that user for the remainder of the warranty period. You should transfer proof of original purchase and this statement to that user.
The replacement item assumes the remaining warranty period of the original product. Replacement is not available to you if the product you present for exchange is defaced, altered, in need of a repair not included in warranty service, or damaged beyond repair. Also, such product must be free of any legal obligation or restrictions that prevent its exchange. Before you present this product for warranty service, remove all programs, data, and removable storage media. For further explanation of your warranty alternatives and the nearest Lexmark authorized servicer in your area, please contact Lexmark at 1-800-5396275, or on the World Wide Web at www.lexmark.com. Free remote technical support is provided for this product throughout its warranty period. For products no longer covered by a Lexmark warranty, technical support may only be available for a fee.
Lexmark Z22 Color Jetprinter Lexmark Z32 Color Jetprinter
This Statement of Limited Warranty applies to this product if it was originally purchased for your use, and not for resale, from Lexmark or a Lexmark remarketer, referred to in this statement as Remarketer.

Warranty service

The warranty period is 12 months and starts on the date of original purchase as shown on the purchase receipt. To obtain warranty service you may be required to present proof of original purchase. Warranty service will be provided at a Remarketer or a Lexmark designated location. You may be required to deliver your product to the Remarketer or Lexmark, or ship it prepaid and suitably packaged to a Lexmark designated location. You are responsible for loss of, or damage to, a product in transit to the Remarketer or the designated location. When warranty service involves the exchange of a product or part, the item replaced becomes the property of the Remarketer or Lexmark. The replacement may be a new or repaired item.

Warranty

Lexmark warrants that this product: Is manufactured from new parts or new and serviceable used parts, which perform like new parts Is free from defects in material and workmanship Conforms to Lexmarks official published specifications, and Is in good working order If this product does not function as warranted during the warranty period, contact a Remarketer or Lexmark for repair without charge.

Extent of warranty

We do not warrant uninterrupted or error-free operation of a product. Warranty service does not include repair of failures caused by: Modification or attachments Accidents or misuse Unsuitable physical or operating environment
Maintenance by anyone other than Lexmark or a Lexmark authorized servicer Operation of a product beyond the limit of its duty cycle Failure to have installed a maintenance kit as specified (if applicable) Use of printing media outside of Lexmark specifications Use of other than Lexmark supplies (such as toner cartridges, inkjet cartridges, and ribbons) Use of other than Lexmark product or component ALL EXPRESS AND IMPLIED WARRANTIES, INCLUDING THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED IN DURATION TO THE WARRANTY PERIOD. NO WARRANTIES, EXPRESS OR IMPLIED, WILL APPLY AFTER THIS PERIOD.
claims by you for bodily injury or damage to real property or tangible personal property for which Lexmark is legally liable. In no event will Lexmark be liable for any lost profits, lost savings, incidental damage, or other economic consequential damages. This is true even if you advise Lexmark or a Remarketer of the possibility of such damages. Lexmark is not liable for any claim by you based on a third party claim. This limitation of remedies also applies to any developer of materials supplied to Lexmark. Lexmarks and the developers limitations of remedies are not cumulative. Such developer is an intended beneficiary of this limitation.

Additional rights

Some states do not allow limitations on how long an implied warranty lasts, or do not allow the exclusion or limitation of incidental or consequential damages. If such laws apply, the limitations or exclusions contained in this statement may not apply to you. This warranty gives you specific legal rights. You may also have other rights which vary from state to state.

Limitation of liability

Your sole remedy under this Statement of Limited Warranty is set forth in this section. For any claim concerning performance or nonperformance of Lexmark or a Remarketer for this product under this Statement of Limited Warranty, you may recover actual damages up to the limit set forth in the following paragraph. Lexmark's liability for actual damages from any cause whatsoever will be limited to the greater of 1) $5,000 or 2) the amount you paid for the product that caused the damages. This limitation of liability will not apply to

last page first Macintosh 10 Windows 3 lights Paper Feed 30 patterns 30 Power 17 loading paper Macintosh 7 Windows 1

ordering supplies 15

page settings, changing 5, 11 Page Setup for Macintosh 9 Paper Feed light flashing 30 paper loading 1, 7 Paper Type/Quality options 10 parallel cable 23
improving print quality 18 index cards Macintosh loading 8 settings 12 Windows
Mac OS 8.Mac OS Macintosh basics 7 installing printer software 31 locks up 32
part numbers black cartridge 17 color cartridge 17 high yield black cartridge 17 high yield color cartridge 17 parallel cable 34 photo cartridge 17 USB cable 34 photo cards Macintosh loading 8 settings 12 Windows loading 2 settings 5 photo paper Macintosh loading 8 settings 13 problems 29 Windows loading 2 settings 5 pop-up menus for Macintosh Background Printing 11 Color 11 General, Page Setup 9 General, Print 10 Paper Type/Quality 10 Watermark 9 postcards Macintosh loading 8 settings 12 Windows loading 2 settings 5 Power light, flashing 30
print cartridge contacts, cleaning 21 print cartridges aligning 18 installing 17 preserving 21 removing 17 replacing 17 wiping nozzles 21 Print dialog for Macintosh 10 print nozzles 21 cleaning 19 wiping 21 print quality banding 28 different colors 29 faded colors 29 improving 18 missing colors 20, 29 smudged 28 too dark 28 troubleshooting 27 print settings,specialty paper Macintosh 12 Windows 5 printer driver downloading 32 installing 31, 32 uninstalling 33 printer driver Help Macintosh 9, 10 Windows 3 Printer Properties for Windows 3 customizing 3 opening 4 setting recommendations 5 printer software installing 31
ordering diskettes 32 Page Setup 9 Print dialog 10 Printer Properties 4 uninstalling 33 printing documents 6, 14 from an application 6, 14 from DOS 33 Web Smoothing 3 printing options Macintosh 9 Windows 3 printing problems color quality 29 faded colors 29 intermittent 28 missing colors 20, 29 paper feeding 27 paper jam 26 paper misfeeds 26
removing print cartridge 17 reverse page order Macintosh 10 Windows 3
safety information 34 setting recommendations Macintosh banner paper 13 coated paper 14 custom size paper 13
envelopes 12 glossy paper 13 greeting cards 12 index cards 12 iron-on transfers 13 photo cards 12 photo paper 13 postcards 12 transparencies 13 Windows banner paper 5 coated paper 5 custom size paper 6 envelopes 5 glossy paper 5 greeting cards 5 index cards 5 iron-on transfers 6 photo cards 5 photo paper 5 postcards 5 transparencies 6 sheet feeder 1, 7 software applications Control Panel 16 Control Program 15 software, printer installing 31 uninstalling 33 specialty papers Macintosh banner paper 8 coated paper 8 custom size paper 8 envelopes 8 glossy paper 8 greeting cards 8 index cards 8 iron-on transfers 8
photo cards 8 photo paper 8 postcards 8 transparencies 8 Windows banner paper 2 coated paper 2 custom size paper 2 envelopes 2 glossy paper 2 greeting cards 2 index cards 2 iron-on transfers 2 photo cards 2 photo paper 2 postcards 2 transparencies 2 statement of limited warranty 35

www.lexmark.com

SNAP SNAP
Printed on recycled paper. 7/00 P/N: 17F0067 EC: 7F0056 Copyright 2000 Lexmark International, Inc. All rights reserved.
Windows 95 Windows 98 Windows 2000 Windows NT 4.0 Windows Me Windows 98 Windows 2000 Windows Me

Parallel IEEE-1284

Mac OS 8.6 Mac OS 9