PRODUCT DATA SHEET

Brother TN-360
Compatible with: Brother DCP-7030, DCP-7040, DCP-7045N, HL-2140, HL-2150N, HL-2170W, MFC-7320, MFC-7340, MFC-7345DN, MFC-7345N, MFC-7440N, MFC-7840W
Compatible Toner Cartridge
Machine Type...Monochrome Laser Print Speed...23 ppm Print Resolution...2400X600 dpi Page Yield...See Chart Product Dimensions...Length 13, Width 4.75, Height 7.75 Product Weight...2.15lbs** Overpack Shipping Box Sizes...Small 2, 6, 12 and 19PK Complete with Smart Print Chip..N/A OEM/MSE Part No..See Chart

PRODUCT

MSE Brand Private Label

OEM PART NO.

TN360 TN360

MSE PART NO.

02-03-3616 02-03-3604

MSE YIELD

2,600 2,600

OEM YIELD

Special Notes
Actual yield may vary depending on environmental conditions, media, and usage. ** Weight may vary depending on packaging.

About MSE

Micro Solutions Enterprises (MSE) manufactures a full line of high-quality compatible monochrome, color, MICR and JUMBO toner cartridges. The company utilizes more than 28 patents and patent-pending technologies in their Intelligent Re-engineeringTM manufacturing process. MSEs manufacturing capacity exceeds 300,000 toner cartridges per month and 100% of all MSE products are proudly manufactured in the USA. The company owns and operates more than 260,000 square feet in California and Pennsylvania as well as additional distribution facilities in Canada, the Netherlands, Brazil and Israel. MSE offers full solutions for outsourcing, private labeling, private packaging, and blind drop shipping. The company also offers award-winning sales training, customized marketing materials and additional value-added services.
Corporate Headquarters 8201 Woodley Avenue Van Nuys, CA 91406 USA Tel: 818.407.7500 Fax: 818.407.7575 Toll Free: 800.673.4968 E-mail: info@mse.com East Coast 301 National Road, Ste. 400 Exton, PA 19341 USA Tel: 610.594.8600 Fax: 610.594.8030 Toll Free: 800.418.4968 E-mail: info@mse.com Canada 7075 Edwards Blvd., Unit 2 Mississauga, Ontario, Canada, L5S 1Z2 Tel: 905.565.6518 Fax: 905.565.7063 Toll Free: 888.561.4541 E-mail: info@msecanada.com Europe Landbouwweg BB Zeewolde The Netherlands Tel: +31.36.522.2601 Fax: +31.36.522.6875 E-mail: info@mse-europe.com

www.mse.com

Copyright 2003 Micro Solutions Enterprises. All rights reserved. All trademarks referenced are registered trademarks of their respective owners. All model designations are for compatibility purposes only. Created by MSE Art Department. 02-03-3616

This Users Guide does not contain all the information about the machine such as how to use the advanced features of Printer, Scanner and Network (DCP-7045N only). When you are ready to learn detailed information about these operations, read the Software Users Guide and Network Users Guide (DCP-7045N only).
If the model name screen appears, click your model name.The CD-ROM main menu will appear.

Viewing documentation

Viewing documentation (Windows)
To view the documentation, from the Start menu, point to Brother, DCP-XXXX (where XXXX is your model name) from the program group, and then click Users Guides in HTML format. If you have not installed the software, you can find the documentation by following the instructions below:
If this window does not appear, use Windows Explorer to find and run the Start.exe program from the root directory of the Brother CD-ROM.
Click Documentation. Click the documentation you want to read: HTML documents (3 manuals): Users Guide for stand-alone operations, Software Users Guide and Network Users Guide (DCP7045N only) in HTML format. This format is recommended for viewing on your computer. PDF documents (4 manuals): Users Guide for stand-alone operations, Software Users Guide, Network Users Guide (DCP7045N only) and Quick Setup Guide. This format is recommended for printing the manuals. Click to go to the Brother Solutions Center, where you can view or download the PDF documents. (Internet access and PDF Reader software are required.)
Turn on your PC. Insert the Brother CD-ROM labelled Windows into your CD-ROM drive. If the language selection screen appears, click your language.

Chapter 1

How to find scanning instructions
There are several ways you can scan documents. You can find the instructions as follows:
Double-click the top page file to view the Users Guide, Software Users Guide and Network Users Guide (DCP7045N only) in HTML format. Click the documentation you want to read. Users Guide Software Users Guide Network Users Guide (DCP-7045N only)

Software User's Guide:

Scanning a document using the TWAIN driver in Chapter 2 Scanning a document using the WIA driver (For Windows XP/Windows Vista only) in Chapter 2 Using ControlCenter3 in Chapter 3 Network Scanning in Chapter 4 (DCP-7045N only)

Printing on plain paper, recycled paper or transparencies from the paper tray
Pull the paper tray completely out of the machine.
While pressing the green paper guide release lever, slide the paper guides to fit the paper size. Make sure that the guides are firmly in the slots.
Put paper in the tray, and make sure that the paper is below the maximum paper mark (1). The side to be printed on must be face down.
Loading paper in the manual feed slot
You can load envelopes and special print media one at a time into this slot. Use the manual feed slot to print or copy on labels, envelopes or thicker paper.
Printing on plain paper, recycled paper or transparencies from the manual feed slot Note
The machine automatically turns on the Manual Feed mode when you put paper in the manual feed slot. CAUTION To prevent damage to your machine caused by paper misfeeding, make sure the paper guides touch the sides of the paper.
Fold out the support flap (1) to prevent paper from sliding off the face-down output tray, or remove each page as soon as it comes out of the machine.
Put the paper tray firmly back in the machine. Make sure that it is completely inserted into the machine. Fold out the support flap (1) to prevent paper from sliding off the face-down output tray.
Open the manual feed slot cover.

Chapter 2

Using both hands, slide the manual feed slot paper guides to the width of the paper that you are going to use.
Printing on thick paper, bond paper, labels and envelopes
When the back output tray is pulled down, the machine has a straight paper path from the manual feed slot through to the back of the machine. Use this paper feed and output method when you want to print on thick paper, labels or envelopes.
Remove each printed sheet or envelope immediately to prevent a paper jam. The machine automatically turns on the Manual Feed mode when you put paper in the manual feed slot.
Using both hands, put one sheet of paper or one transparency in the manual feed slot until the front edge touches the paper feed roller. When you feel the machine pull in the paper, let go.

Types of paper to avoid

CAUTION Some types of paper may not perform well or may cause damage to your machine. DO NOT use paper: that is highly textured that is extremely smooth or shiny that is curled or warped

Envelopes

Most envelopes will be suitable for your machine. However, some envelopes may have feed and print-quality problems because of the way they have been made. A suitable envelope should have edges with straight, well-creased folds and the leading edge should not be thicker than two sheets of paper. The envelope should lie flat and not be of baggy or flimsy construction. You should buy quality envelopes from a supplier who understands that you will be using the envelopes in a laser machine. Envelopes can be fed from manual feed slot one at a time. We recommend that you print a test envelope to make sure the print results are what you want before you print or purchase a large quantity of envelopes. Check the following: Envelopes should have a lengthwise sealing flap. The sealing flaps should be folded crisply and correctly (irregularly cut or folded envelopes may cause paper jams). Envelopes should consist of two layers of paper in the area circled in figure below.
that is coated or has a chemical finish that is damaged, creased or folded that exceeds the recommended weight specification in this guide with tabs and staples with letterheads using low temperature dyes or thermography that is multipart or carbonless that is designed for inkjet printing If you use any of the types of paper listed above, they may damage your machine. This damage is not covered under any Brother warranty or service agreement.

1 Feeding direction

We recommend that you do not print within 15 mm of the edges of envelopes. Envelope joints that are sealed by the manufacturer should be secure.
Types of envelopes to avoid
CAUTION DO NOT use envelopes: that are damaged, curled, wrinkled or an unusual shape that are extremely shiny or textured
with double flaps as shown in figure below
with clasps, staples, snaps or tie strings with self-adhesive closures that are of a baggy construction that are not sharply creased that are embossed (have raised writing on them) that were previously printed by a laser machine that are pre-printed on the inside that cannot be arranged neatly when stacked that are made of paper that weighs more than the paper weight specifications for the machine with edges that are not straight or consistently square with windows, holes, cut-outs or perforations with glue on surface as shown in figure below

Ecology features

Toner Save

You can save toner using this feature. When you set Toner Save to On, print appears lighter. The default setting is Off.

Sleep time

Setting the sleep time reduces power consumption by turning off the fuser while the machine is idle. You can choose how long the machine must be idle (from 00 to 99 minutes) before it goes into sleep mode. When the machine receives computer data, or makes a copy, the timer will be reset. The default setting is 05 minutes. While the machine is in sleep mode the LCD will display Sleep. When printing or copying in sleep mode, there will be a short delay while the fuser warms up.

a b c d e f

Press Menu. Press a or b to choose 1.General Setup. Press OK. Press a or b to choose 4.Ecology. Press OK. Press a or b to choose 1.Toner Save. Press OK. Press a or b to choose On or Off. Press OK. Press Stop/Exit.
Press Menu. Press a or b to choose 1.General Setup. Press OK. Press a or b to choose 4.Ecology. Press OK. Press a or b to choose 2.Sleep Time. Press OK. Enter the length of time the machine is idle before entering sleep mode (00 to 99). Press OK. Press Stop/Exit.
We do not recommend Toner Save for printing Photo or Greyscale images.
To turn off sleep mode, press Start and Options at the same time in e. Press a or b to choose Off. Press OK.

LCD contrast

You can change the contrast to make the LCD look lighter or darker.
Network Configuration List (DCP-7045N only)
The Network Configuration List prints a report listing all the current network configuration including the network print server settings.

a b c d e

Press Menu. Press a or b to choose 1.General Setup. Press OK. Press a or b to choose 5.LCD Contrast. Press OK. Press a to make the LCD darker. Or, press b to make the LCD lighter. Press OK. Press Stop/Exit.
Node name: Node name appears in the Network Configuration List. The default node name is BRNXXXXXXXXXXXX.
Press Menu. Press a or b to choose 1.General Setup. Press OK. Press a or b to choose 7.Network Config. Press OK. Press Start. Press Stop/Exit.

Software and Network (DCP-7045N only) features
Click the heading you would like to view from the list at the left of the window.

For Macintosh

Make sure your Macintosh is turned on. Insert the Brother CD-ROM into your CD-ROM drive. Double-click the Documentation icon. Double-click your language folder, and then double-click the top page file. Click on the manual you want (USERS GUIDE, SOFTWARE USERS GUIDE or NETWORK USERS GUIDE (DCP7045N only)) in the top menu, and then click the heading you would like to read from the list at the left of the window.

Chapter 5

Section IV

Appendixes

Safety and legal Troubleshooting and routine maintenance Menu and features Specifications Glossary

Safety and legal

Choosing a location
Place your machine on a flat, stable surface that is free of vibration. Put the machine near a standard, grounded electrical socket. Choose a location where the temperature remains between 10 C and 32.5 C and the humidity is between 20% to 80% (without condensation). Make sure cables leading to the machine do not constitute a trip hazard. Avoid placing your machine on the carpet. Do not place near heaters, air conditioners, water, chemicals or refrigerators. Do not expose the machine to direct sunlight, excessive heat, moisture or dust. Do not connect your machine to electrical sockets controlled by wall switches or automatic timers, or to the same circuit as large appliances that might disrupt the power supply.

Important information

Safety precautions
Please read these instructions before attempting any maintenance, and keep them for later reference. When using your equipment, follow basic safety precautions to reduce the risk of fire, electric shock or personal injury. DO NOT use this product near water, or in a damp environment. Avoid using this product during an electrical storm. There may be a remote risk of electric shock from lightning. We DO NOT advise using an extension lead. If any cables become damaged, disconnect your machine, and contact your Brother dealer. DO NOT place any objects on the machine, or obstruct the air vents. This product should be connected to an adjacent grounded AC power source within the range indicated on the rating label. DO NOT connect it to a DC power source or inverter. If you are not sure, contact a qualified electrician.

WARNING

Before cleaning the inside of the machine, unplug the power cord from the electrical socket.
DO NOT handle the plug with wet hands. Doing this might cause an electrical shock.
Always make sure the plug is fully inserted.
After you have just used the machine, some internal parts of the machine will be extremely hot. When you open the front or back cover of the machine, DO NOT touch the shaded parts shown in the illustrations.
To prevent injuries, be careful not to put your hands on the edge of the machine under the document cover or scanner cover as shown in the illustrations.
(DCP-7040 and DCP-7045N) To prevent injuries, DO NOT put your fingers in the areas shown in the illustrations.
DO NOT use a vacuum cleaner to clean up scattered toner. Doing this might cause the toner dust to ignite inside the vacuum cleaner, potentially starting a fire. Please carefully clean the toner dust with a dry, lint-free cloth and dispose of it according to local regulations.
If moving your machine, use the handholds provided. First making sure to disconnect any cables.
DO NOT use any flammable substances, spray or organic solvent/liquids containing alcohol/ammonia to clean the inside or outside of the machine. Doing this may cause a fire or electrical shock. Refer to Routine maintenance on page 62 for how to clean the machine.
Plastic bags are used in the packaging of your machine. To avoid the danger of suffocation, keep these bags away from babies and children.
The fuser unit is marked with a Caution label. DO NOT remove or damage the label.
IEC60825-1+A2:2001 Specification
This machine is a Class 1 laser product as defined in IEC60825-1+A2:2001 specifications. The label shown below is attached in countries where required. This machine has a Class 3B Laser Diode which emits invisible laser radiation in the Scanner Unit. The Scanner Unit should not be opened under any circumstances.
CLASS 1 LASER PRODUCT APPAREIL LASER DE CLASSE 1 LASER KLASSE 1 PRODUKT

Laser Diode A

Wave length: 780 - 800 nm Output: 10 mW max. Laser Class: Class 3B WARNING Use of controls, adjustments or performance of procedures other than those specified in this manual may result in hazardous radiation exposure.

12 The power cord, including extensions should be no longer than 5 metres. DO NOT share the same power circuit with other high powered appliances, such as an air conditioner, copier, shredder or similar devices. If you cannot avoid using the printer with these appliances, we recommend that you use a high-frequency noise filter. Use a voltage regulator if the power source is not stable. 13 DO NOT place anything in front of the machine that will block printed pages. DO NOT place anything in the path of printed pages. 14 Wait until pages have exited the machine before picking them up. 15 Unplug this product from the power socket and refer all servicing to Brother Authorized Service Personnel under the following conditions: When the power cord is damaged or frayed. If liquid has been spilled into the product. If the product has been exposed to rain or water. If the product does not operate normally when the operating instructions are followed. Adjust only those controls that are covered by the operating instructions. Incorrect adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the product to normal operation. If the product has been dropped or the casing has been damaged. If the product exhibits a distinct change in performance, indicating a need for service. 16 To protect your product against power surges, we recommend the use of a power protection device (Surge Protector). 17 To reduce the risk of fire, electric shock and injury to people, note the following: DO NOT use this product near appliances that use water, a swimming pool or in a wet basement. DO NOT use the machine during an electrical storm (there is the remote possibility of an electrical shock).

Trademarks

The Brother logo is a registered trademark of Brother Industries, Ltd. Brother is a registered trademark of Brother Industries, Ltd. Multi-Function Link is a registered trademark of Brother International Corporation. Windows Vista is either a registered trademark or a trademark of Microsoft Corporation in the United States and/or other countries. Microsoft, Windows, Windows Server and Internet Explorer are registered trademarks of Microsoft Corporation in the United States and/or other countries. Apple, Macintosh, Safari and TrueType are trademarks of Apple Inc., registered in the United States and other countries.
Intel, Intel Core and Pentium are trademarks of Intel Corporation in the U.S. and other countries. AMD is a trademark of Advanced Micro Devices, Inc. Adobe, Flash, Illustrator, PageMaker, Photoshop, PostScript and PostScript 3 are either registered trademarks or trademarks of Adobe Systems Incorporated in the United States and/or other countries. Nuance, the Nuance logo, PaperPort and ScanSoft are trademarks or registered trademarks of Nuance Communications, Inc. or its affiliates in the United States and/or other countries. Each company whose software title is mentioned in this manual has a Software Licence Agreement specific to its proprietary programs. All other trademarks are the property of their respective owners.

Init Unable XX Jam Rear Jam Inside Jam Tray No Paper

Out of Memory

The machines memory is full.
Copy operation in progress Do one of the following: (DCP-7040 and DCP-7045N only) Press Start to copy the scanned pages. Press Stop/Exit and wait until the other operations in progress finish, and then try again. Clear the data from the memory. (See Out of memory message on page 27.) Print operation in process Reduce print resolution. (See Advanced tab in the Software Users Guide on the CD-ROM.)
Print Unable XX Scan Unable XX Toner Life End
The machine has a mechanical problem. The machine has a mechanical problem. The drum unit and toner cartridge assembly is not installed correctly, or the toner cartridge is used up and printing is not possible.
Disconnect the machine from the power for several minutes and then reconnect it. Disconnect the machine from the power for several minutes and then reconnect it. Do one of the following: Re-install the toner cartridge and drum unit assembly. Replace the empty toner cartridge with a new one. (See Replacing a toner cartridge on page 69.)

Error Message Toner Low

Cause If the LCD shows Toner Low, you can still print; however, the machine is telling you that the toner cartridge is near the end of its life and the toner will soon need replacing.
Action Order a new toner cartridge now.
Document jams (DCP-7040 and DCP-7045N only)
If the document is jammed, follow the steps below.
Document is jammed under the document cover
Take out any paper from the ADF that is not jammed. Lift the document cover. Pull the jammed document out to the right.
After removing a jammed document, check that no paper scraps are left in the machine that could cause another jam.
Document is jammed in the top of the ADF unit
Take out any paper from the ADF that is not jammed. Open the ADF cover. Pull the jammed document out to the left.
Close the document cover. Press Stop/Exit.
Close the ADF cover. Press Stop/Exit.
Document is jammed at the output tray

Paper jams

Pull the jammed document out to the right.
To clear paper jams, please follow the steps in this section.
Please confirm that you have installed both a toner cartridge and a drum unit in the machine. If you have not installed a drum unit or have installed the drum unit incorrectly, then this may cause a paper jam in your Brother machine. If the error message remains, open and close the front cover and fuser cover firmly to reset the machine.

WARNING HOT SURFACE After you have just used the machine, some internal parts of the machine will be extremely hot. To prevent injury, when you open the front or back cover (back output tray) of the machine, DO NOT touch the shaded parts shown in the illustration. We recommend that you place the drum unit on a clean, flat surface with a piece of disposable paper or cloth underneath it in case you accidentally spill or scatter toner.
Wipe the laser scanner window by wiping it with a clean soft, dry lint-free cloth.

Cleaning the corona wire

If you have print quality problems, clean the corona wire as follows:
Turn off the machines power switch. Disconnect all cables, and then unplug the power cord from the electrical socket. Open the front cover.
Close the front cover. Plug the machines power cord back into the electrical socket. Turn on the machines power switch. CAUTION We recommend that you place the drum unit and toner cartridge assembly on a clean, flat surface with a piece of disposable paper or cloth underneath it in case you accidentally spill or scatter toner. Handle the toner cartridge carefully. If toner scatters on your hands or clothes, wipe or wash it off with cold water at once.
To prevent damage to the machine caused by static electricity, DO NOT touch the electrodes shown in the illustration.
Plug the machines power cord back into the electrical socket first, and then reconnect all cables. Turn on the machines power switch. CAUTION
To avoid print quality problems, DO NOT touch the shaded parts shown in the illustrations below.
Clean the corona wire inside the drum unit by gently sliding the green tab from right to left and left to right several times.
CAUTION Be sure to return the green tab to the home position (a) (1). If you do not, printed pages may have a vertical stripe.
Put the drum unit and toner cartridge assembly back in the machine. Close the front cover.

Cleaning the drum unit

If you have print quality problems, clean the drum unit as follows.
Turn off the machines power switch. Unplug the power cord from the electrical socket. Open the front cover.
Push down the green lock lever and take the toner cartridge out of the drum unit. CAUTION

Close the carton and tape it shut.

Menu keys

On-screen programming
Your machine has been designed to be easy to use. The LCD provides on-screen programming using the menu keys. We have created step by step on-screen instructions to help you program your machine. Simply follow the steps as they guide you through the menu selections and programming options.

Access the menu.

Menu table
You can program your machine by using the Menu table on page 80. These pages list the menu selections and options. Press Menu followed by the menu numbers to program your machine. For example, to set Beeper volume to Low:
Go to the next menu level. Accept an option.
Exit the menu by pressing repeatedly. Go back to the previous menu level. Scroll through the current menu level.
Press Menu. Press a or b to choose 1.General Setup. Press OK. Press a or b to choose 3.Beeper. Press OK. Press a or b to choose Low. Press OK. Press Stop/Exit.

Exit the menu.

Memory storage
Your menu settings are stored permanently, and in the event of a power failure will not be lost. Temporary settings (for example, Contrast) will be lost.
How to access the menu mode
Press Menu. Scroll through each menu level by pressing a or b for the direction you want. Press OK when the option you want appears on the LCD. The LCD will then show the next menu level. Press a or b to scroll to your next menu selection. Press OK. When you have finished setting an option, the LCD will show Accepted. Press Stop/Exit to exit Menu mode.
The factory settings are shown in Bold with an asterisk. Choose & OK Choose & OK to accept to exit
Main Menu 1.General Setup

Submenu 1.Paper Type

Menu Selections
Options Thin Plain* Thick Thicker Transparency Recycled Paper
Descriptions Sets the type of paper in the paper tray.

Page 17

2.Paper Size
A4* Letter Executive A5 A6 B5 B6
Sets the size of the paper in the paper tray.

3.Beeper

Off Low Med* High
Adjusts the volume level of the beeper.

4.Ecology

0.Factory Reset

Yes No
Restore all network settings to factory default.
Main Menu 3.Machine Info. (DCP-7030 and DCP-7040) 5.Machine Info. (DCP-7045N)
Submenu 1.Serial No. 2.Page Counter
Options Total List Copy Print
Descriptions You can check the serial number of your machine. You can check the number of total pages the machine has printed during its life.

Page 76 76

3.Drum Life
You can check the percentage of a Drum life that remains available.
Printer Type Print Method
Laser Electrophotography by semiconductor laser beam scanning

Memory Capacity

16 MB (DCP-7030 and DCP-7040) 32 MB (DCP-7045N) LCD (liquid crystal display) 16 characters 2 lines Power Source Power Consumption 220 - 240V 50/60Hz Peak: 1056 W Copying: Average 320 W 1 Sleep: (DCP-7030) Average 8 W (DCP-7040) Average 9 W (DCP-7045N) Average 10 W Average 75 W

Standby:

When making a copy from one sheet

Dimensions

DCP-7030

257 mm

428 mm

397 mm

DCP-7040 and DCP-7045N

305 mm

Weight
Without Drum/Toner Unit: (DCP-7030) 9.9 kg (DCP-7040 and DCP-7045N) 11.1 kg

Noise level

Sound power Operating (Copying): Standby: Sound pressure Operating (Copying): Standby:
LWAd = 6.2 Bell LWAd = 4.4 Bell LPAm = 53 dBA LPAm = 32 dBA
Temperature Humidity ADF (automatic document feeder)
Operating: Storage: Operating: Storage:
10 to 32.5C 5 to 35C 20 to 80% (without condensation) 10 to 90% (without condensation)
(DCP-7040 and DCP-7045N) Up to 35 pages (Staggered) [80 g/m2] Recommended Environment for Best Results: Temperature: Humidity: Paper: 20 to 30C 50% - 70% Xerox Premier TCF 80 g/m2 or Xerox Business 80 g/m2

Paper Tray

250 Sheets [80 g/m2]

Print media

Paper Input Paper Tray Paper Type: Paper Size: Paper Weight: Plain paper, Transparencies 1 or Recycled paper Letter, A4, B5 (ISO), A5, B6, A6 and Executive 60 to 105 g/m2
Maximum paper tray capacity: Up to 250 sheets of 80 g/m2 plain paper Manual Feed Slot Paper Type: Paper Size: Paper Weight: Maximum manual feed slot capacity:
Plain paper, Transparencies, Recycled paper, Bond paper, Envelopes or Labels 1 Width: 76.2 to 220 mm Length:116 to 406.4 mm 60 to 163 g/m2 One sheet at a time
For transparencies and labels, we recommend removing printed pages from the output paper tray immediately after they exit the machine to avoid the possibility of smudging.
Paper Output Up to 100 sheets (face down print delivery to the output paper tray)

Colour/Monochrome Document Size Monochrome (DCP-7040 and DCP-7045N) ADF Width: (DCP-7040 and DCP-7045N) ADF Length: Scanner Glass Width: Scanner Glass Length: Copy Width Multiple Copies Reduce/Enlarge Resolution First Copy Out Time
148.0 to 215.9 mm 148.0 to 355.6 mm Max. 215.9 mm Max. 297 mm
Max. 210 mm Stacks up to 99 pages Sorts up to 99 pages (DCP-7040 and DCP-7045N) 25% to 400% (in increments of 1%) Up to dpi, 1200 dpi class Less than 15 seconds (from Ready state) 1
The first copy out time may vary depending on scanner lamp warm up time.
Colour/Monochrome TWAIN Compliant Yes/Yes Yes (Windows 2000 Professional/XP/ XP Professional x64 Edition/Windows Vista) Mac OS X 10.2.4 or greater WIA Compliant Colour Depth Resolution Yes (Windows XP/Windows Vista) 24 bit colour Up to dpi (interpolated) 1 Up to dpi (optical) (From Scanner Glass) (DCP-7040 and DCP-7045N) Up to dpi (optical) (From ADF) Document Size (DCP-7040 and DCP-7045N) ADF Width: (DCP-7040 and DCP-7045N) ADF Length: Scanner Glass Width: Scanner Glass Length: Scanning Width Greyscale

Max. 210 mm 256 levels

Maximum dpi scanning with the WIA driver in Windows XP/Windows Vista (resolution up to dpi can be chosen by using the Brother scanner utility)
Emulations (DCP-7045N only) Printer Driver PCL6, BR-Script3 (PostScript3) Host-Based Driver for Windows 2000 Professional/ XP/XP Professional x64 Edition/Windows Vista (DCP-7045N only) BR-Script3 (PPD file) for Windows 2000 Professional/ XP/XP Professional x64 Edition/Windows Vista/ Windows Server 2003 (print only via network) Macintosh Printer Driver for Mac OS X 10.2.4 or greater (DCP-7045N only) BR-Script3 (PPD file) for Mac OS X 10.2.4 or greater Resolution Print Speed First Print Out Time
HQ1200 (dpi), 600, 300 dpi Up to 22 pages/minute (A4 size) 1 Less than 10 seconds (from Ready state and standard tray)
The print speed may change depending on the type of document you print.

Interfaces

USB LAN cable (DCP-7045N only)
Use a USB 2.0 interface cable that is no longer than 2.0 m. Use an Ethernet UTP cable category 5 or greater.
Your machine has a Full-Speed USB 2.0 interface. The machine can also be connected to a computer that has a USB 1.1 interface. Third party USB ports are not supported for Macintosh.

Computer requirements

Minimum System Requirements and Supported PC Software Functions Computer Platform & Operating System Version Supported PC PC Interface Software Functions Printing, Scanning USB, 10/100Ba se Tx (Ethernet) (DCP7045N only) Processor Minimu Recom Available Hard Minimum m RAM mende Disk Space Speed d RAM For For Drivers Applicati ons Intel Pentium II or AMD equivalent 64 MB 256 MB 150 MB 310 MB