Photo Printer

The Ideal Printer: Speed, Performance and Borderless Photos.
Up to 22 ppm black/up to 14 ppm color Up to 4800 x 1200 color dpi with microscopic 2 picoliter droplets 4" x 6" borderless photos in less than 48 seconds 4 individual ink tanks save money* Photos lightfast for approx. 25 years**
Intelligent design. Incredible results.
The Canon i850 Photo Printer sets a new performance standard for delivering superior quality and breakthrough speed simultaneously. It delivers output resolution up to an ultra-high 4800 x 1200 color dpi and incredibly fast speeds of up to 22 ppm in black and up to 14 ppm in color. The i850 printer produces outstanding, photo-lab quality 4" x 6" borderless photos in less than 48 seconds. And when printed on Canon Photo Paper Pro, photos will retain their brilliance for approx. 25 years** The i850 printer has the unique Canon. Think Tank System that combines individual ink tanks with intelligent ink management for ease-of-use and lower printing costs*.
A new breakthrough: 2 picoliter ultra-fine droplets.
The i850 printer introduces a new printhead with a unique combination of 5 picoliter droplets for coverage and ultra-fine 2 picoliter droplets for photo-realism. Achieving this array of reduced droplet sizes is amazingbut its only half the story. Increased precision is necessary to realize the potential for higher quality printing. The answer: advanced MicroFine Droplet Technology with an exclusive 1600-nozzle system that can eject approximately 19 million droplets per second. Accuracy and consistency is maintained for maximum resolution and image quality. The i850 printer also has advanced Precision Color Distribution Technology to virtually eliminate color variance and banding problems typically found with conventional high-speed, bi-directional printing.
Easy-PhotoPrint*** software and Exif Print: smart photo processing of digital camera images.
The i850 printer supports Exif 2.2 (Exchangeable Image Format File), a new worldwide standard for higher quality digital photos. The i850 printer with exclusive Easy-PhotoPrint software delivers the potential of Exif Printand more. When an Exif compliant digital camera captures a photo, important camera settings and shooting conditions are saved in the JPEG image file. Simple-to-use Easy-PhotoPrint analyzes the recorded data then automatically adjusts printer driver settings for optimum image processing. The result: digital photos that are more likely to match the photographers true intentions.
* Will vary based on composition of images/documents printed. ** Based on Canon Inc. studies conducted using Canon Photo Paper Pro, under glass, utilizing industrystandard lighting conditions and controlled temperature and humidity. Results may vary based on individual environmental factors. See www.usa.canon.com/consumer/lightfast for details. *** Windows only. Print sample photo Gil Smithall rights reserved.

Technical Information*

Long Lasting Color Print Speed (up to)*** Approximately 25 years** Black: 22 ppm (approx. 2.7 seconds per page) Color: 14 ppm (approx. 4.2 seconds per page) 4" x 6" Borderless Photo: less than 48 seconds 8" x 10" Photo: less than 90 seconds Black: 320 Color: 512 x 2 (C,M) and 256 (Y) 600 x 600 dpi in black 4800 x 1200 dpi in color Windows 95/98/2000/Me, Windows NT 4.0, Windows XP, Mac OS (8.6 to 9.x) and Mac OS X**** (version 10.1 or later) Canon Extended Mode USB 2.0 Full Speed and IEEE 1284 parellel port 248KB Letter, legal, A4, U.S. #10 or European envelopes, banner paper Built-in sheet feeder150 sheets @ paper weight 24 lb. Banner Paperup to 6 connected sheets Envelopes10 Glossy Photo Cards (4" x 6")20 sheets Glossy Photo Paper (8.5" x 11")1 sheet High Gloss Photo Film (8.5" x 11")1 sheet High Resolution Paper (8.5" x 11")80 sheets Matte Photo Paper (8.5" x 11")10 sheets Photo Paper Plus Glossy For Borderless Printing (4" x 6")20 sheets Photo Paper Plus Glossy (8.5" x 11")1 sheet Photo Paper Pro (4" x 6")20 sheets Photo Paper Pro For Borderless Printing (4" x 6")20 sheets Photo Paper Pro (8.5" x 11")1 sheet Transparencies (8.5" x 11")30 sheets T-Shirt Transfer (8.5" x 11")1 sheet 39 dB(A) in best quality mode 120V AC, 60Hz Setup Software and Users Guide CD-ROM, including: Printer drivers, Easy-PhotoPrint (Windows), PhotoRecord (Windows), ZoomBrowser EX (Windows), ImageBrowser (Mac), PhotoStitch (Windows/Mac), electronic Users Guide and electronic Photo Application Guide 1-year limited warranty with InstantExchange warranty program

Number of Nozzles Print Resolution (up to) OS Compatibility Standard Emulation Standard Interfaces Buffer/RAM Paper Sizes Paper Handling
Noise Level (approx.) Power Source Software Included

Warranty

Ordering Information
Printer and Accessories Ink Tanks i850 Photo Printer BCI-3eC Cyan BCI-3eM Magenta BCI-3eY Yellow BCI-3eBk Black Banner Paper (continuous/50 sheets) Bubble Jet Paper (water-resistant, 8.5" x 11"/200 sheets) Bubble Jet Paper (water-resistant, 8.5" x 14"/200 sheets) Glossy Photo Cards (4" x 6"/20 sheets) Glossy Photo Paper (8.5" x 11"/20 sheets) High Gloss Photo Film (8.5" x 11"/10 sheets) High Resolution Paper (8.5" x 11"/100 sheets) Matte Photo Paper (8.5" x 11"/50 sheets) Photo Paper Plus Glossy For Borderless Printing (4" x 6"/20 sheets) Photo Paper Plus Glossy For Borderless Printing (4" x 6"/50 sheets) Photo Paper Plus Glossy (8.5" x 11"/20 sheets) Photo Paper Pro (8.5" x 11"/15 sheets) Photo Paper Pro (4" x 6"/20 sheets) Transparencies (8.5" x 11"/50 sheets) T-Shirt Transfers (8.5" x 11"/10 sheets) T-Shirt Transfers (8.5" x 11"/250 sheets) 7820A001 4480A003 4481A003 4482A003 4479A003 1049A003 1038A012 1038A013 1032A002 1026A009 1041A005 1033A011 7981A004 7980A007 7980A012 7980A006 1029A004 5699A005 1043A004 CST-6178-000 CST-6044-000
For More Information Visit
www.usa.canon.com/consumer For the name of the nearest dealer, call: 1-800-OK-CANON Canon U.S.A., Inc. One Canon Plaza Lake Success, NY 11042 1-800-OK-CANON Canon Canada, Inc. 6390 Dixie Road, Mississauga Ontario L5T 1P7, Canada 1-800-OK-CANON Canon Latin America, Inc. 703 Waterford Way, Suite 400 Miami, FL 33126 1-305-260-7400
* Specifications are subject to change without notice. ** Based on Canon Inc. studies conducted using Canon Photo Paper Pro, under glass, utilizing industry-standard lighting conditions and controlled temperature and humidity. Results may vary based on individual environmental factors. See www.usa.canon.com/consumer/lightfast for details. *** Print speeds will vary depending on system configuration, software, document complexity, print mode and page coverage. 4" x 6" photo print speed is based on default mode driver setting using Canon Photo Paper Pro For Borderless Printing 4" x 6" 8" x 10". photo print speed is based on default mode driver setting printing an 8" x 10" image on 8.5" x 11" Canon Photo Paper Pro. All other print speeds are based on draft mode. **** Driver available at www.cannontechsupport.com. System requirements vary by application. InstantExchange warranty program is subject to certain conditions and restrictions. See the warranty in the Quick Start Guide for full details.

Canon Specialty Papers

MICR FINE DROPLET

TECHNOLOGY

2002 Canon U.S.A., Inc. Canon, BCI, Canon Know How, Canon Think Tank System, MicroFine Droplet Technology and the MicroFine Droplet Technology logo are trademarks of Canon Inc. PhotoRecord is a trademark of Canon Information Systems Research Australia. Microsoft, Windows, and the Windows logo are trademarks or registered trademarks of the Microsoft Corporation in the United States and/or other countries. Mac and the Mac logo are trademarks of Apple Computer, Inc., registered in the U.S. and other countries. All other product and brand names are trademarks of their respective owners. As an Energy Star partner, Canon U.S.A., Inc. has determined that this product meets the Energy Star guidelines for energy efficiency.

PISG-C438-0602 40-42276

Loading the Print Media

In this example, description is provided of the steps used to load Plain Paper in your printer. For detailed information on the specialty media Canon provides for use with its various printers, refer to the section "Using Special Media" on page 5. Using Media Consult the Users Guide for detailed instructions on how to load envelopes and specialty media in the printer.
Flatten the four corners of the paper before loading it.
Important When paper is curled, hold the opposing curled corners and gently bend them in the opposite direction until the paper becomes completely flat.

Preparing to Load Paper

(1) Open and pull out the paper rest.
(2) Open the cover and pull out
the paper output tray. (3) Open the front cover and adjust the paper thickness lever to the correct position for the media in use. Move to the left position for plain paper. Move to the right position for envelopes, Banner Paper and T-Shirt Transfers.

Loading the Paper

Limit Mark Do not load beyond this Load Limit Mark.
(1) Insert the paper in the sheet feeder with print side facing up. (2) Align the paper stack snug against the right side of the sheet feeder.
(3) Press the paper guide and slide it against the left side of the stack of paper.
Do not stack more than 50 sheets in the paper output tray. Do not touch the printed surfaces until the ink dries. For specific drying times, refer to the instructions packaged with your media.

Using Special Media

Canon recommends that you use genuine Canon media to insure optimal print quality.

Photo quality media

Photo Paper Pro Photo Paper Plus Glossy Matte Photo Paper Glossy Photo Paper Glossy Photo Cards High Gloss Photo Film High Resolution Paper
Media suited to business documents
High Resolution Paper Transparencies

Canon Special Media

Media Type Paper Rest Load Limit Bubble Jet Paper Up to 150 sheets Brilliant White Paper Up to 150 sheets Banner Paper 1 sheet(can print up to 6 connected sheets) Photo Paper Pro Letter: Up to 10 sheets 4 x 6: Up to 20 sheets Photo Paper Plus Letter: Up to 10 Glossy sheets 4 x 6:Up to 20 sheets Matte Photo Paper Up to 10 sheets Glossy Photo Paper Up to 10 sheets High Resolution Up to 80 sheets Paper High Gloss Photo 1 sheet Film Glossy Photo Cards Up to 20 sheets T-Shirt Transfers Transparencies Note 1 sheet Up to 30 sheets Paper Thickness Lever Position Left Left Right Printer driver setting Media Type Plain Paper

Start Easy-PhotoPrint.

(1) Insert the memory card in the computer. This chapter describes only the steps used for printing the photographs stored in the card as an example. We recommend you consult your memory card documentation for instructions on how to set the memory card in the computer. (2) Click Start select All Programs (or Programs Canon Utilities, Easy-PhotoPrint, Start, Programs), Utilities Easy-PhotoPrint and then Easy-PhotoPrint Easy-PhotoPrint. The 1.Image Selection sheet is displayed.

Select photographs.

(1) Select the folder containing the photograph you want to print. (Select memory card folder, then the folder containing the digital photographs.) All photographs in the selected folder are displayed. Guidance

Thumbnail

Folder window
(2) Click the [+] button on the thumbnail of the photograph you want to print and specify the number of copies.
The number of copies increases. The specified number of copies displayed. The number of copies decreases.

Select the paper.

(1) Click the 2.Paper

Selection tab.

(2) Select the size of the
paper you use from Paper Size. Size
(3) Select the type of the
paper you use from Type. Media Type

Select the layout.

(1) Click the 3. Layout/

Print tab.

(2) Select Borderless(full) Borderless(full).
(3) Load the media type specified in the 2.Paper Selection tab. (4) Click Print Print.
Printing photographs with Macintosh
This chapter describes only the steps used to print from photo applications included with your Setup Software and Users Guide CD-ROM using the Borderless Printing mode. Note Media Types Suitable for Borderless Printing Media Types compatible with Borderless Printing include Photo Paper Plus Glossy (LTR, 4" x 6"), Photo Paper Pro (LTR), Matte Photo Paper (LTR), and Glossy Photo Paper (LTR). Follow the simple steps described below and learn how to create color prints of digital camera photographs with ImageBrowser using Borderless Printing. Exif Print (Exif2.2) is a new worldwide standard. Under Exif2.2, the digital camera can record data tags for specific camera settings and functions such as whether the flash was on or off, if the camera was in portrait or night scene mode, etc. BJ Printers support Exif Print and use ImageBrowser to read camera data precisely, producing optimal prints. This enables you to create prints that reproduce your vision more accurately than ever before.

Start ImageBrowser.

(1) Insert the memory card in the computer. This chapter describes the steps used for printing the photographs stored in the card. We recommend you consult your memory card documentation for instructions on how to set the memory card in the computer. (2) Double-click the Canon ImageBrowser (alias) icon on the desktop. If the Canon ImageBrowser icon is not displayed on the desktop, open the Canon ImageBrowser folder, in which the ImageBrowser program has been installed, and double-click the ImageBrowser icon in the folder.

(1) Select the folder containing the photograph you want to print. (Select memory card folder, then the folder containing the digital photographs.) All photographs in the selected folder are displayed.

(2) Click the photograph

you want to print.
(3) Click PRINT and select
Layout printing from the pull-down menu.
The Layout Options dialog box appears and layout selection wizard starts.

Enter layout options.

(1) Select Tiled photo printing printing.

(2) Click Next Next.

(3) Click Page setup setup.
Select Borderless Printing.
(1) Select Borderless Printing by
clicking the check box. (2) Select a paper size from the Paper Size pull-down menu. The menu only displays those paper sizes compatible with Borderless Printing.
(3) Click OK OK. A message box pops up, displaying the information about printing. Read the message and click OK OK. This returns you to the Layout Options dialog box.
Specify the number of photographs to print on one page.
(1) Select 1(11) from the No.
of images pull-down menu.

Print the photograph.

(1) Click PRINT PRINT.
The Print dialog box is displayed.
(2) Select a type of media for
printing from the Media Type pull-down menu. (3) Select Photo from the Print Mode pull-down menu. (4) Load the selected paper in the printer. (5) Click Print Print.

Accessing Printer Driver

The Printer Properties dialog box can be opened from either within an application, or directly from the Windows Start menu. Note This manual refers to Windows XP operation. The operations may vary depending on your operating system. Depending on your application program, the command and menu names may differ, and there may be more steps involved in opening the Printer Properties dialog box. For further details, see the user's manual for your application.
Opening the Printer Properties dialog box from your application program
In your application, select the command to print a document.

To manually adjust Print Quality settings:
Open the Printer Properties dialog box.
See"Opening the Printer Properties dialog box from your application program" Opening program on page 19
Select Custom in Print Quality, then click Set. to open the Set Print Quality dialog box. Move the slide bar to adjust the Print Quality.

When done, click OK.

Open the Print dialog box.
See "Printing with Macintosh" on page 9 Printing Macintosh
Click Print Mode and select Manual, then click Details. to open the Detailed Setting dialog box. Move the slide bar to adjust the Print Quality.
To automatically optimize the image: Photo Optimizer PRO automatically adjusts a photographic image created with a digital camera. Use this feature to compensate for unsatisfactory color balance and over- or under-exposure before printing.
See"Opening the Printer Properties dialog box from your application program Opening program" on page 19
Click the Effects tab. Select the Photo Optimizer PRO check box.

Click OK.

See "Printing with Macintosh on page 9 Macintosh" Printing
Click Print Mode and select Manual, then click Details. to open the Detailed Setting dialog box. Click (Special effects). Select the Photo Optimizer PRO check box.
To use Vivid Photo option: Vivid Photo intensifies background colors for fields, trees, oceans and skies, while maintaining natural skin tones in the images. Note In Windows Me, Windows 98 or Windows 95 The Vivid Photo function will not be available if Background Printing has been disabled.
To use Vivid Photo, select the Vivid Photo check box on the Effects tab.
To use Vivid Photo, select the Vivid Photo check box in the Special Effects. Effects
To reduce noise from images recorded with digital camera: Photo Noise Reduction function reduces noise from blue portions such as the sky and dark portions of the images recorded with your digital camera. Note In Windows Me, Windows 98 or Windows 95 The Photo Noise Reduction function will not be available if Background Printing has been disabled.
To use Photo Noise Reduction, select the Photo Noise Reduction check box on the Effects tab.
To use Photo Noise Reduction, select the Photo Noise Reduction check box on the Special Effects. Effects
Saving and Recalling Driver Settings
When you change printer driver settings for a specific print job, such as printing black and white photos, or printing documents with a special background, you can save and name these settings for future use on similar print jobs.
See "Opening the Printer Properties dialog box from your application Opening program" program on page 19
Click the Profiles tab. Enter new settings in Profiles.
(1) Click Add to Profiles.
The Add to Profiles dialog box opens.
(2) Enter the name of profile for

registering settings. (3) Select an icon. (4) Enter description on the registering profile.
Click OK. Click OK on the Profiles tab.
This registers your printer driver print settings. Note You can retrieve or delete the print settings profile at any time. Retrieving profile: Select the desired profile from Printing Profiles and click Retrieve from Profiles. Profiles Deleting unwanted profile: Select the desired profile from Printing Profiles and click Delete. Delete For details, click Help and refer to the topic of this function.

Click Apply.

The Register Settings dialog box opens.
Enter the print settings to register.

(1) Click Apply.

The dialog box to enter the new settings name opens.
(2) Enter a name under which
to register your settings.
Click OK. Click Close in the Register Settings dialog box.
This registers your printer driver print settings. Note You can retrieve or delete the saved driver settings at any time. Retrieving print settings: Select the name of the settings to retrieve from the Settings list and click Import Import. Deleting unwanted drivers settings: Select the name of the settings to delete from the Settings list and click Remove Remove.
Using Printer Driver Options
Getting to know the basic features of your printer driver will provide you with sufficient expertise to print a wide range of images and documents. The illustrations below provide a basic introduction to the many features offered by your printer driver. Note For detailed description of the printer driver functions, refer to the Users Guide.
Printing with Borderless Printing
Reducing Noise from Images Recorded with Digital Camera
Smoothing the Rough Edges of Certain Images
Automatically Resizing the Image to Fit the Page
Resizing the Image by Selecting the Scaling Ratio
Adding Illustrated Effect to Documents

Replacing an Ink Tank

When replacing an ink tank, check the model number very carefully. The printer will not print properly if the wrong ink tank is used, or installed in the incorrect position. With this printer, ink tanks must be installed from the right in the order indicated below. Yellow: BCI-3eY Magenta: BCI-3eM Cyan: BCI-3eC Black: BCI-3eBK
Knowing When to Replace Ink Tank
If an ink tank needs replacing, as soon as printing begins, the POWER lamp will change from green to orange and flash four times. It is important to quickly identify the empty tank using the BJ Status Monitor (Windows) or error messages (Macintosh) and replace it. Note Should missing characters or white streaks appear despite sufficient ink levels, refer to the section "When Printing When Incorrect" Becomes Faint or Colors are Incorrect on page 34
The following message appears when ink is empty. Printing will resume as soon as ink tank is replaced and the front cover is closed.

The ink tank with [X] symbol is out of ink. Replace with a new ink tank. Press the RESUME/CANCEL button to resume printing with an empty ink tank. When printing is finished, replace the ink tank immediately. If you continue printing with an empty ink tank, it will be a cause of trouble. Menu screens will vary to some degree, depending on your software environment. Empty ink tank
When Low Ink is Detected The BJ Status Monitor appears as soon as a print job starts. [!] Indicates ink low. Obtain a replacement tank as soon as possible.
Click Cancel Printing to cancel the current print job Tank with low ink level
The following message is displayed when ink tank is empty. Printing will resume as soon as ink tank is replaced and the front cover is closed. Press the RESUME/CANCEL button to resume printing with the ink tank empty. When printing is finished, replace the ink tank immediately. If you continue printing with an empty ink tank, it will be a cause of trouble.
When Low Ink is Detected The following message is displayed as soon as a print job starts. [!] Indicates ink low. Obtain a replacement tank as soon as possible.

Tank with low ink level

Replacing Ink Tanks
When ink tanks run out of ink, replace them using the following steps.
Ensure that the printer is on, and then open the front cover.
The print head holder moves to the center.
Remove the empty ink tank.
(1) Push the tab and remove the ink tank.
Do not touch the lock lever; remove only the ink tank.

Important

Handle ink tanks carefully to avoid staining clothing or the surrounding area. Discard empty ink tanks according to the local laws and regulations regarding disposal of consumables.
Prepare a replacement tank.
(1) Unpack the new ink tank and pull off the orange tape. (2) Remove the orange protective cap from the bottom of the ink tank and discard it.
Important Do not squeeze the side of ink tanks as this may cause the ink to leak out and stain your clothes and hands. Do not re-attach the protective cap once you have removed it. Once the protective cap is removed, do not touch the open ink port.

Install the ink tank.

(1) Insert the ink tank in the print head holder. (2) Press on the "PUSH" mark until the ink tank snaps firmly into place.

Close the front cover.

The print head holder moves to the right. The ink tank installation process is now complete. Note To maintain optimal Print Quality, use an ink tank within six months of first use. Once an ink tank has been used, do not remove it from the printer and leave it out in the open. An ink tank left out in the open and then reinstalled in the printer may not function. Color ink consumption may occur even when black-andwhite or grayscale printing is specified. Color ink is consumed in the head cleaning and deep cleaning, which are necessary to maintain the printers capabilities.
When Printing Becomes Faint or Colors are Incorrect
When printing becomes faint or colors are incorrect, even if ink remains in the ink tanks, see if the print head nozzles are clogged and clean them first. Follow the procedures below and maintain the print head. Important Before maintaining the print head, check the following; Open the front cover and make sure whether the ink tank contains ink. If it is out of ink, replace it. Ensure that all the orange tape of the ink tank has been peeled off. Press "PUSH" on the ink tank and ensure that the ink tank is installed securely. Increase the Print Quality setting in the printer driver settings.

Step 1

"Printing the Nozzle Check Pattern" on page 35 Printing Pattern"
If the print quality is poor
If white stripes are noticeable

Step 2

"Print Head Cleaning" on page 37 Cleaning" Print
"Aligning Print Head" on page 42 Aligning Head"

If the problem remains

Step 3
"Print Head Deep Cleaning" on page 40 Print Cleaning"
If print head maintenance does not resolve the problem, contact the Customer Care Center.
Printing the Nozzle Check Pattern
Print the nozzle check pattern to determine whether the ink ejects normally from the print head nozzles, and to verify print head alignment. Use this function when printed results are blurred or the color is incorrect.
With the printer on, load a sheet of Letter paper in the printer. Open the Printer Properties dialog box.
See "Opening the Printer Properties dialog box directly from the Start menu" on menu" Opening page 20
Print the Nozzle Check Pattern.
(1) Click the Maintenance tab.
Check. (2) Click Nozzle Check
(3) When the confirmation message is displayed, click OK OK. See "Examining the Nozzle Check Pattern" on page 37 Pattern" Examining
With the printer on, load a sheet of Letter paper in the printer. Open the Printer Utility dialog box.
(1) Select Page Setup. in the File menu (2) Click Utilities to open the Printer Utility dialog box.

Paper feed roller is dirty Printed Surface is Inappropriate Scratched paper type used
Clean the paper feed roller. See "Paper Does Not Feed Properly on page 51 Properly" Paper Check to see if the paper you are printing on is too thick or curled. See "Print Media to Avoid on page 3 Avoid" Print Note that smudging may occur at the top and bottom edges of the paper when using Borderless Printing. Make sure that the paper you are using is compatible with Borderless Printing. See "Media Types Suitable for Borderless Printing on page 12 Printing" Media
Incorrect position of the paper thickness lever
When printing on thick paper, set the paper thickness lever to the
This widens a gap between the print head and the paper. If the paper is scratched even when printing on plain paper, also try this.
Troubleshooting Printer Hardware
Printer Does Not Start or Printer Stops During Print Jobs
Print head has overheated due to long periods of continuous printing
Stop printing and turn the printer off for at least 15 minutes to allow the print head to cool down. The print head tends to overheat when printing continuously for long periods of time. The print head is designed to automatically pause at line breaks before resuming printing in order to cool down. Caution The area around the print head can become extremely hot during extended print operation. Always avoid touching the print head and its peripheral components.
Printing highresolution photographs and graphics Printer cable is too long There may be problems in your operating system
Wait until the print job finishes. The POWER lamp flashes green while the print data is being processed. Printing photographs and high-density graphics can take time. Avoid using printer (parallel) cables longer than 6.5 feet and USB cables longer than 16.4 feet. Restart your computer. It may solve the problem. Delete an undesired print job if there is any. Use BJ Status Monitor in Windows or BJ Print Monitor in Macintosh for the deletion. 1. Open the Printer Properties dialog box. See "Opening the Printer Properties dialog box directly from the Start menu menu" Opening on page 20 2. Click Maintenance tab and then Start Status Monitor Monitor. 3. Click Display Print Queue Queue. 4. Select Cancel All Documents in the Printer menu. Click Yes when a confirmation message appears. The print job is deleted. Note In Windows Me, Windows 98 or Windows 95 Click to select an undesired document and select Purge Print Documents in the Printer menu.
1. Double-click BJ Print Monitor in the Extensions in the System Folder. 2. Click to select an undesired document and click The print job is deleted. Cannot Print to End of Job Incorrect page size selected.

Verify that the page size setting matches the size of the paper loaded in the printer: - Check the Paper Size setting from within your application to ensure that it matches the size of the paper load. - Check the Page Setup tab in the Printer Properties dialog box (for Windows) or the Page Setup dialog box (for Macintosh) to ensure that it matches the size of the paper loaded.
Not enough free space on hard disk
Your operating system may be out of free disk space. Check the available space on your computers hard disk.
Paper Does Not Feed Properly
Inappropriate paper type used Paper feed roller is dirty
Check to see if the paper you are printing on is too thick or curled. See "Print Media to Avoid on page 3 Avoid" Print Follow the steps described below to clean the paper feed rollers. If envelopes or post cards do not feed properly, even after correcting any paper curl, clean the paper feed roller. 1. Ensure the printer is on and there is no paper loaded in the printer. 2. Hold the RESUME/CANCEL button down and release after the POWER lamp flashes three times. The paper roller rotates as it cleans. Repeat this cleaning operation three times. 3. Load a sheet of Letter sized plain paper in the printer. 4. Hold the RESUME/CANCEL button down and release after the POWER lamp flashes three times, then feed the sheet of paper. Repeat this operation three times. If the printer still does not feed the envelopes or the post cards properly through the printer, even after the cleaning operation, repeat the procedures.

Paper Jams

1. Gently pull the jammed paper out of the sheet feeder slot or the paper output slot, whichever is easier. If the paper tears and some of it is left in the printer, turn the printer off, then open the front cover and remove the piece of paper. Do not touch internal parts in the printer. If you cannot reach or remove the torn paper, do not attempt to disassemble the printer yourself. Contact the Customer Care Center. If you cannot extract the paper, turn the printer off, and then turn it back on. The remaining paper will be ejected automatically. 2. Close the front cover and reload the paper into the paper rest, then press the RESUME/CANCEL button on the printer.

Handling Error Messages

When a printer error occurs, the POWER/ERROR lamp flashes. The number of flashes indicate the type of error that has occurred. Count the flashes and take the appropriate action to correct the error.

Number of flashes

Two flashes Three flashes Four flashes
Indicates printer is out of paper
Reload paper and press the RESUME/CANCEL button.
Indicates paper jam If a paper jam occurs, clear the jammed paper, reload paper in the printer, then press the RESUME/CANCEL button. See "Paper Jams" on page 51 Paper Jams Indicates empty ink Press the RESUME/CANCEL button to resume printing with ink out condition. tank Replace with a new ink tank immediately after the printing. It may damage the printer if you continue printing with ink out condition. See "Replacing an Ink Tank" on page 29 Replacing Tank Indicates print head Install print head. If print head is already installed, remove the print head and not installed check the contacts for foreign matter, then reinstall. After reinstall the print head, you may need to realign it.

Users Guide Table of Contents
Your printers Users Guide offers detailed information on the following topics. How to Use This Manual Printer Parts and Their Function Useful Printing Techniques
Printing with Borderless Printing Reducing Noise from Images Recorded with Digital Camera Achieving Vivid Reproduction of Images with Lots of Greens and Blues Printing with Color and Brightness Automatically Optimized Adjusting Print Quality Smoothing the Rough Edges of Certain Images Automatically Resizing the Image to Fit the Page Resizing the Image by Selecting the Scaling Ratio Printing Multiple Pages on a Single Page Enlarge a Document by Printing it on Multiple Pages Printing Multiple Pages for Assembly into a Booklet Printing on Both Sides of the Page Printing Stamped Messages on Documents Printing Background Images on Documents Adding Illustrated Effect to Documents Printing Entire Image in Single Color Printing in Grayscale Reversing the Page Printing Order Printing on Nonstandard Size Paper Reducing the Sound of Printer Operation Registering Printer Driver Settings Glossy Photo Paper GP-301N/GP-301 High Gloss Photo Film HG-201 Glossy Photo Cards FM-101 Photo Paper Pro PR-101 Photo Paper Pro PC-101S Photo Paper Plus Glossy PP-101 Matte Photo Paper MP-101 Transparencies CF-102 T-Shirt Transfers TR-201 Banner Paper
Checking the Status of the Printer
BJ Status Monitor Functions BJ Backgrounder and BJ Background Monitor BJ Printer Monitor BJ Print Monitor
Cannot Install Printer Driver Print Quality is Poor Printer Does Not Start or Stops During Print Jobs Paper Does Not Feed Properly or Paper Jams The POWER Lamp Flashes Orange An Error Message is Display on the Screen Problems Unique to Windows Problems Unique to the Macintosh
Printing Area For Faster Printing Using the Printer with a Network Uninstalling Printer Drivers Uninstalling the Users Guide Transporting Printer Printer Driver Functions(Windows) Printer Driver Functions (Macintosh)

Printing Media

Compatible Media Types Envelopes High Resolution Paper HR-101N

Specifications

Printer
Printing resolution: Print speed * *Print speed may vary with the content of the document and the pressing speed of the host computer. 4800 X 1200 dpi. max. Black printing (text pattern) Draft: 22 ppm Standard: 13.0 ppm Color printing Draft: 14 ppm Standard: 9.0 ppm Print width: 203.2 mm max. (8.0 in) (for Borderless Printing: 216.0 mm/8.5 in) Canon extended mode 248 KB IEEE 1284-compatible USB 2.0 Full Speed Approx. 39 dB (A) (in the highest print quality mode) Temperature: 5 to 35C (41 to 95F) Humidity: 10 to 90%RH (no condensation) Temperature: 0 to 40C (32 to 104F) Humidity: 5 to 95% RH (no condensation) Europe AC 230 V10%, 50 Hz USA/Canada AC 120 V, 60 Hz Australia AC 240 V, 50 Hz Power consumption: Standby: Approx. 0.7 W Printing: Approx. 24 W 16.46 (W) X 10.79 (D) X 6.26 (H) in

Resident print control mode: Receive buffer: Interface (parallel): Interface (USB): Acoustic noise level: Operating environment:

Storage environment:

Power supply:
Dimensions (without a paper rest and paper output tray retracted): Weight: Graphic image printing:
Approx. 4.9 kg (10.8 lb.) Data format: Canon extended mode: Raster image format Resolution: 2400, Canon extended mode: 300, 600, 1200, 2400, 4800 dpi

Print Head:

Black: 320 nozzles (600 dpi) Cyan, Magenta, Yellow: 256 nozzles (1200 dpi)
Ink Tanks: Capacity (pages): Black (BCI-3eBK) approx. 740*1, approx. 1500*2 Cyan (BCI-3eC) approx. 570*2 Magenta (BCI-3eM) approx. 440*2 Yellow (BCI-3eY) approx. 380*2 *characters per page, normal text, at standard and plain paper mode with Windows XP *2 Based on printing the ISO JIS-SCID No.5 pattern at standard and plain paper mode with Windows XP
BJ Printer Driver Systems Requirements
Use a computer on which Windows XP, Windows 2000, Windows Me, Windows 98, Windows NT 4.0 or Windows 95 can operate. USB* interface or standard 25 pin parallel interface Available hard-disk space for printer driver installation Windows XP/Windows 2000/Windows NT 4.0: 50MB Windows Me/Windows 98/Windows 95: 15MB * USB operation can only be guaranteed on a PC with preinstalled Windows XP, Windows 2000, Windows Me, or Windows 98. (This includes Windows XP, Windows 2000 or Windows Me upgraded from pre-installed Windows 98 or later) Use a Macintosh series computer equipped with USB interface on which Mac OS 8.6 or later can operate. 30MB of available hard-disk space for printer driver installation
Additional Systems Requirements for User's Guide
Pentium (Pentium Pentium 75 MHz equivalent or higher processor (Pentium 133MHz equivalent or higher processor recommended ) 2x or higher CD-ROM drive (4x or higher recommended) 20 MB of available hard-disk space Microsoft Internet Explorer 5.0 or later

Safety Precautions

Please read the safety warnings and cautions provided in this manual to ensure that you use your printer safely. Do not attempt to use printer in any way not described in this manual. Warning You may cause an electric shock/fire or damage the printer if you ignore any of these safety precautions.
Do not place the printer close to flammable solvents such as alcohol or thinners. Never attempt to plug in or unplug the printer from the power supply when your hands are wet. Always push the plug all the way into the power outlet. Never damage, modify, stretch or excessively bend or twist the power cord. Do not place heavy objects on the power cord.

Print heads and ink tanks For safety reasons store print heads and ink tanks out of the reach of small children. If a child ingests any ink, consult a doctor immediately. Do not shake print heads or ink tanks. Ink may leak out and stain clothing or the surrounding area. Never touch the electrical contacts on a print head after printing. The metal parts may be very hot and could cause burns.

Regulatory Information

Color Printer Model: K10219 (i850)
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Use of a shielded cable is required to comply with Class B limits in Subpart B of Part 15 of the FCC Rules. Do not make any changes or modifications to the equipment unless otherwise specified in the manual. If such changes or modifications should be made, you could be required to stop operation of the equipment. Canon U.S.A., Inc. One Canon Plaza Lake Success, NY 11042

CANON LIMITED WARRANTY --- (USA Only).. 60 Chooser... 53 Cleaning... 37

Deep Cleaning... 40

Easy-PhotoPrint...11, 12 Examining the Nozzle Check Pattern.. 37 Exif Print.. 11, 12, 15

front cover.. 4

Replacing an Ink Tank..29 RESUME/CANCEL button.. 8, 10
Glossy Photo Cards.. 6 Glossy Photo Paper... 6, 12, 15
Safety Precautions...57 Specifications..55
Handling Error Messages.. 52 High Gloss Photo Film.. 6 High Resolution Paper.. 6
Transparencies...6 Troubleshooting..46 T-Shirt Transfers...6
ImageBrowser...11, 15 Ink tank... 29, 32, 48

Vivid Photo...24

Matte Photo Paper.. 6, 12, 15
Warranty...60 When Printing Becomes Faint or Colors are Incorrect.34

ZoomBrowser EX...11