VPAT (iP90)

Voluntary Product Accessibility Template (VPAT)
Name of Product: Canon Bubble Jet Printer iP90 Date: December 9, 2005
Note: This document was prepared based on normal walk-up functionality. It does not include maintenance and troubleshooting procedures. The information contained in this document is proprietary information and is not for reproduction, publication or manipulation in any way or form. This template addresses a multitude of Canon Bubble Jet Printer iP90 features; however, any specific inquiries should be made to the Canon Government Marketing Representative.
The rules below refer to the Electronic and Information Technology Accessibility Standards (covered by Section 508 of the Rehabilitation Act of 1998) issued by the Architectural and Transportation Compliance Board. Comments in the Supporting Features column are based on the Information Technology Industry Councils suggested language for use when filling out the Voluntary Product Accessibility Template. The Remarks and Explanations column provides additional information on the evaluation results, and explains the standard functions of the Bubble Jet Printer iP90 that can accommodate users with disabilities.
Summary Table Voluntary Product Accessibility Template
Criteria Section 1194.21 Software Applications and Operating Systems Section 1194.22 Web-based Internet Information and Applications Section 1194.23 Telecommunications Products Section 1194.24 Video and Multi-media Products Section 1194.25 Self-Contained, Closed Products Section 1194.31 Functional Performance Criteria Section 1194.41 Information, Documentation, and Support
Supporting Features Supports with exceptions.* Not Applicable

Remarks and explanations

Canon Bubble Jet Printer iP90 is not Web-based Internet Information or Application. Canon Bubble Jet Printer iP90 is not a telecommunications product. Canon Bubble Jet Printer iP90 is not a Video or Multi-media Product.
Not Applicable Not Applicable Supports with exceptions.* Supports with exceptions.* Supports with exception.*
*Please refer to the following pages for detailed information on supporting features and exceptions.
Section 1194.21 Software Applications and Operating Systems Criteria Supporting Features Remarks and explanations Some Preview items of the printer driver are not executable on user interface.
(a) When software is designed to run on a Supports with exceptions. system that has a keyboard, product functions shall be executable from a keyboard where the function itself or the result of performing a function can be discerned textually. (b) Applications shall not disrupt or disable Supports. activated features of other products that are identified as accessibility features, where those features are developed and documented according to industry standards. Applications also shall not disrupt or disable activated features of any operating system that are identified as accessibility features where the application programming interface for those accessibility features has been documented by the manufacturer of the operating system and is available to the product developer. (c) A well defined on-screen indication of the Supports. current focus shall be provided that moves among interactive interface elements as the input focus changes. The focus shall be programmatically exposed so that Assistive Technology can track focus and focus changes. (d) Sufficient information about a user Supports with exceptions. interface element including the identity, operation and state of the element shall be available to Assistive Technology. When an image represents a program element, the information conveyed by the image must also be available in text. (e) When bitmap images are used to identify controls, status indicators, or other programmatic elements, the meaning assigned to those images shall be consistent throughout an application's performance. (f) Textual information shall be provided through operating system functions for displaying text. The minimum information that shall be made available is text content, text input caret location, and text attributes. (g) Applications shall not override user selected contrast and color selections and other individual display attributes. Supports.

Information regarding the slide bar and its related user interface elements may not be sufficient in some instances.

Supports.

(h) When animation is displayed, the Supports. information shall be displayable in at least one non-animated presentation mode at the option of the user. (i) Color-coding shall not be used as the only Supports with exceptions. means of conveying information, indicating an action, prompting a response, or In the Stamp Settings tab of the printer driver, the selected stamp color is displayed only by color (no other
distinguishing a visual element. (j) When a product permits a user to adjust color and contrast settings, a variety of color selections capable of producing a range of contrast levels shall be provided. Not Applicable.
means to convey information on the selected color).
(k) Software shall not use flashing or Support blinking text, objects, or other elements having a flash or blink frequency greater than 2 Hz and lower than 55 Hz. (l) When electronic forms are used, the form shall allow people using Assistive Technology to access the information, field elements, and functionality required for completion and submission of the form, including all directions and cues. Supports with exceptions. Information regarding the slide bar and its related user interface elements may not be sufficient in some instances.
Section 1194.25 Self-Contained, Closed Products Criteria Supporting Features Remarks and explanations Whether the printer power is ON or OFF cannot be confirmed with the Power button. There is no indication of the setting through touch or sound. Pinching is necessary to move the paper thickness lever.
(a) Self contained products shall be usable by Supports with exceptions. people with disabilities without requiring an end-user to attach Assistive Technology to the product. Personal headsets for private listening are not Assistive Technology. (b) When a timed response is required, the Not Applicable. user shall be alerted and given sufficient time to indicate more time is required. (c) Where a product utilizes touch screens or contact-sensitive controls, an input method shall be provided that complies with 1194.23 (k) (1) through (4). (1194.23 k-1) Products which have Supports. mechanically operated controls or keys, shall comply with the following: Controls and keys shall be tactilely discernible without activating the controls or keys. (1194.23 k-2) Controls and keys shall be operable with one hand and shall not require tight grasping, pinching, or twisting of the wrist. The force required to activate controls and keys shall be 5 lbs. (22.2 N) maximum. (1194.23 k-3) If key repeat is supported, the delay before repeat shall be adjustable to at least 2 seconds. Key repeat rate shall be adjustable to 2 seconds per character. (1194.23 k-4) The status of all locking or toggle controls or keys shall be visually discernible, and discernible either through touch or sound. Supports with exceptions.

Refer to details in subsections k(1) through k(4) below.
Pinching is necessary to move the paper thickness lever.

Not Applicable.

For selection of some functions, repeated pressing of the Resume/Cancel button is required. In such case, the delay before repeat cannot be set to 2 seconds or longer. Whether the printer power is ON or OFF cannot be confirmed with the Power button. There is no indication of the setting through touch or sound.
Supports with exceptions.
(d) When biometric forms of user Not Applicable. identification or control are used, an alternative form of identification or activation, which does not require the user to possess particular biological characteristics, shall also be provided. (e) When products provide auditory output, Not Applicable. the audio signal shall be provided at a standard signal level through an industry standard connector that will allow for private listening. The product must provide the ability to interrupt, pause, and restart the audio at anytime. (f) When products deliver voice output in a Not Applicable. public area, incremental volume control shall be provided with output amplification up to a level of at least 65 dB. Where the ambient
noise level of the environment is above 45 dB, a volume gain of at least 20 dB above the ambient level shall be user selectable. A function shall be provided to automatically reset the volume to the default level after every use. (g) Color coding shall not be used as the only Support with exception. means of conveying information, indicating an action, prompting a response, or distinguishing a visual element. The printer status is indicated only by the Power lamp color on the printer. (However, when the printer is connected to a computer, the printer status can be confirmed via Status Monitor.)
(h) When a product permits a user to adjust color and contrast settings, a range of color selections capable of producing a variety of contrast levels shall be provided.

Not applicable.

(i)Products shall be designed to avoid Not applicable. causing the screen to flicker with a frequency greater than 2 Hz and lower than 55 Hz. (j) (1) Products which are freestanding, nonportable, and intended to be used in one location and which have operable controls shall comply with the following: The position of any operable control shall be determined with respect to a vertical plane, which is 48 inches in length, centered on the operable control, and at the maximum protrusion of the product within the 48 inch length on products which are freestanding, non-portable, and intended to be used in one location and which have operable controls. (j)(2) Products which are freestanding, nonportable, and intended to be used in one location and which have operable controls shall comply with the following: Where any operable control is 10 inches or less behind the reference plane, the height shall be 54 inches maximum and 15 inches minimum above the floor. Not applicable.

(j)(3) Products which are freestanding, non- Not applicable. portable, and intended to be used in one location and which have operable controls shall comply with the following: Where any operable control is more than 10 inches and not more than 24 inches behind the reference plane, the height shall be 46 inches maximum and 15 inches minimum above the floor. (j)(4) Products which are freestanding, nonportable, and intended to be used in one location and which have operable controls shall comply with the following: Operable controls shall not be more than 24 inches behind the reference plane Not applicable.
Section 1194.31 Functional Performance Criteria Criteria (a) At least one mode of operation and information retrieval that does not require user vision shall be provided, or support for Assistive Technology used by people who are blind or visually impaired shall be provided. Supporting Features Supports with exceptions. Remarks and explanations - Whether the printer power is ON or OFF cannot be confirmed with the Power button, either by touching or by hearing. - Information regarding the printer driver slide bar and its related user interface elements may not be sufficient in some instances. - The printer status is indicated only by the Power lamp color on the printer. (However, when the printer is connected to a computer, the printer status can be confirmed via Status Monitor.)
(b) At least one mode of operation and information retrieval that does not require visual acuity greater than 20/70 shall be provided in audio and enlarged print output working together or independently, or support for Assistive Technology used by people who are visually impaired shall be provided.
(c) At least one mode of operation and Supports. information retrieval that does not require user hearing shall be provided, or support for Assistive Technology used by people who are deaf or hard of hearing shall be provided. (d) Where audio information is important for Supports. the use of a product, at least one mode of operation and information retrieval shall be provided in an enhanced auditory fashion, or support for assistive hearing devices shall be provided. (e) At least one mode of operation and information retrieval that does not require user speech shall be provided, or support for Assistive Technology used by people with disabilities shall be provided. (f) At least one mode of operation and information retrieval that does not require fine motor control or simultaneous actions and that is operable with limited reach and strength shall be provided. Supports.

Support with exception.

For selection of some functions, repeated pressing of the Resume/Cancel button is required. In such case, the delay before repeat cannot be set to 2 seconds or longer.
Section 1194.41 Information, Documentation, and Support Criteria Supporting Features Remarks and explanations Product support documentation will be provided upon request in electronic format, at no additional charge. An evaluation of the accessibility features of products will be provided upon request in electronic format, at no additional charge.
(a) Product support documentation available to end- Supports users is available in alternate formats upon request, at no additional charge. (b) End-users have access to a description of the accessibility and compatibility features of products in alternate formats and alternate methods upon request, at no additional charge. Supports with Exception
c) Support services for products accommodate the Supports communication needs of end-users with disabilities.
Canon U.S.A., Inc. provides support services accommodating users with disabilities through OKCANON assistance, TTY support at (866) 251-3752. Canon otherwise available to U.S. federal government agencies through Federal Relay.
This document is for informational purposes only. This information is based on Canons current understanding of 36 CFR Part 1194 Electronic and Information Technology Accessibility Standard and Section 508 of the Rehabilitation Act. It is not intended to address applicability of these laws to a particular end-user, customer, application or procurement. All product design and specifications are subject to change. Some of the information may be based upon data collected or tests conducted on similar product modules. The information in this Voluntary Product Accessibility Template (VPAT) should not be considered a contractual agreement by Canon. FURTHER, THE INFORMATION AND MATERIALS PROVIDED IN THIS VPAT ARE AS IS WITHOUT WARRANTIES OF ANY KIND, INCLUDING WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR NONINFRINGEMENT OF INTELLECTUAL PROPERTY. Canon does not warrant the accuracy and completeness of the information or materials in this VPAT. Canon may make changes to the information in this VPAT, or to the products described in this VPAT at any time, without notice.

Rebate

BY MAIL
Buy a select new Canon Photo Printer/All-In-One or Canon SELPHY DS810 Compact Photo Printer* and any new Canon PowerShot Digital Camera or Canon Digital Camcorder with a Memory Card Slot** or a new laptop or desktop computer and get a $50 mail-in rebate.

Buy a new or

Photo Printer
together with any one of the following products

Digital Camera

Canon Digital Camcorder** or any new laptop or desktop computer

and get $50 back by mail

*Qualifying Photo Printers/All-In-Ones: PIXMA iP90, iP4200, iP5200, iP5200R, iP6210D, iP6220D, iP6600D, MP170, MP450, MP500, MP780, MP800, MP800R, MP830, MP950, SELPHY DS810 **Qualifying Canon Digital Camcorder models: Optura S1, Optura 50, Optura 60, Optura 600, DC10, DC20, DC40, Elura 100, Elura 80, Elura 85, Elura 90, ZR200, ZR300, ZR400, ZR600, ZR700 With this mail-in claim form. Limited-time offer. Offer valid in the fifty United States, the District of Columbia, and Puerto Rico. Purchases must be made between 2/1/06 and 6/30/06. Printer/All-In-One and Digital Camera or Printer/All-In-One and Digital Camcorder or Printer/All-In-One and Computer must be purchased together and appear on the same receipt. See details and restrictions inside.
Terms of offer: To qualify for this $50 mail-in rebate offer, your envelope containing this rebate form, the original Proof of Purchase 12-digit UPC bar code cut from the new Canon PIXMA iP90, iP4200, iP5200, iP5200R, iP6210D, iP6220D, iP6600D, MP170, MP450, MP500, MP780, MP800, MP800R, MP830, MP950 Photo Printer or Photo All-In-One or Selphy DS810 Photo Printer box AND, if purchased, the original Proof of Purchase 12-digit UPC bar code cut from the new Canon PowerShot Digital Camera box AND, if purchased, the original PictBridge logo cut from the new Canon Optura S1, Optura 50, Optura 60, Optura 600, DC10, DC20, DC40, Elura 100, Elura 80, Elura 85, Elura 90, ZR200, ZR300, ZR400, ZR600 or ZR700 Digital Camcorder box and a legible copy of your sales receipt with the printer or All-In-One AND PowerShot Digital Camera, or eligible Canon Digital Camcorder, or desktop or laptop computer purchases circled must be postmarked no later than July 31, 2006 and received no later than August 14, 2006. Purchase of a new Canon PIXMA iP90, iP4200, iP5200, iP5200R, iP6210D, iP6220D, iP6600D, MP170, MP450, MP500, MP780, MP800, MP800R, MP830, MP950 Photo Printer or Photo All-In-One or Selphy DS810 Photo Printer and any new PowerShot Digital Camera, or an eligible new Canon Digital Camcorder, or any desktop or laptop computer must be made together between February 1, 2006 and June 30, 2006 and must appear on the same receipt to be eligible for the offer. Photocopied UPC bar codes, photocopied PictBridge logos or Secondary Proof of Purchase bar codes will not be accepted. All required information on the claim form must be hand printed; no mechanical reproductions or labels will be accepted. One claim form is required for each rebate requested. Keep copies of materials submitted; originals submitted become vendors property and will not be returned. Allow 60 days for delivery. Incomplete or illegible claim forms and claims that do not comply with the terms and conditions of this offer will be rejected and will not be returned. Vendor has the right to substantiate sales receipts. Dealers, distributors, and other resellers are not eligible for this offer. Offer good in the fifty United States, the District of Columbia, and Puerto Rico on products purchased from an authorized Canon dealer or dealers of its distributors in the fifty United States, the District of Columbia, and Puerto Rico only. Offer does not apply to purchases of refurbished or used products nor for a camera and printer packaged in one box and sold for one price. Rebate check will only be mailed to an address in the fifty United States, the District of Columbia, or Puerto Rico (no P.O. boxes). Void where prohibited, taxed or restricted. Vendor is not responsible for lost, stolen, misdirected or undelivered mail, nor for misprints or typographical errors. Cash value 1/100.
K Please check this box if you do not want to receive information about other Canon products and promotions that may be of interest to you. For questions regarding this offer, call 1-888-864-6781 from 6:00 a.m. to 10:00 p.m., MT, Monday-Friday, excluding holidays. For a status on your rebate, visit http://canon.rebatestatus.com. 2006 Canon U.S.A., Inc. Canon, Elura, Optura, PowerShot, SELPHY and ZR are registered trademarks and PIXMA is a trademark of Canon Inc. in the United States and may also be registered trademarks or trademarks in other countries.

0060W858

New Canon PIXMA iP90, iP4200, iP5200, iP5200R, iP6210D, iP6220D, iP6600D, MP170, MP450, MP500, MP780, MP800, MP800R, MP830, MP950 Photo Printer or All-In-One or SELPHY DS810 Photo Printer AND Any New Canon PowerShot Digital Camera or Canon Digital Camcorder with a Memory Card Slot or Desktop or Laptop Computer $50 Mail-In Rebate
I am eligible for the following $50 mail-in rebate (check one qualifying printer or All-In-One and one bundle combination): QUALIFYING PRINTER K New PIXMA iP90 Photo Printer K New PIXMA iP6600D Photo Printer K New PIXMA iP4200 Photo Printer K New PIXMA MP170 Photo All-In-One K New PIXMA iP5200 Photo Printer K New PIXMA MP450 Photo All-In-One K New PIXMA iP5200R Photo Printer K New PIXMA MP500 Photo All-In-One K New PIXMA iP6210D Photo Printer K New PIXMA MP780 Photo All-In-One K New PIXMA iP6220D Photo Printer K New PIXMA MP800 Photo All-In-One

K K K K

New PIXMA MP800R Photo All-In-One New PIXMA MP830 Photo All-In-One New PIXMA MP950 Photo All-In-One New SELPHY DS810 Compact Photo Printer
*Sample of 12-digit UPC bar code and PictBridge logo
QUALIFYING BUNDLE K Along with the qualifying printer or All-In-One, a new Canon PowerShot Digital Camera was purchased K Along with the qualifying printer or All-In-One, an eligible new Canon Digital Camcorder with a Memory Card Slot was purchased (Optura S1, Optura 50, Optura 60, Optura 600, DC10, DC20, DC40, Elura 100, Elura 80, Elura 85, Elura 90, ZR200, ZR300, ZR400, ZR600 or ZR700 Digital Camcorder) K Along with the qualifying printer or All-In-One a new Desktop or Laptop Computer was purchased

SAMPLE

PROOF OF PURCHASE
How this $50 offer works: 1. Between February 1, 2006 and June 30, 2006 purchase a new Canon PIXMA iP90, iP6210D, iP6220D, iP6600D, iP4200, iP5200, iP5200R, MP170, MP450, MP500, MP780, MP800, MP800R, MP830, MP950 Photo Printer or All-In-One or SELPHY DS810 Photo Printer together with any new Canon PowerShot Digital Camera, or together with a new Canon Optura S1, Optura 50, Optura 60, Optura 600, DC10, DC20, DC40, Elura 100, Elura 80, Elura 85, Elura 90, ZR200, ZR300, ZR400, ZR600 or ZR700 Digital Camcorder, or together with any new desktop or laptop computer. Printer or All-In-One and computer or printer or All-In-One and camera or printer or All-In-One and camcorder must be purchased together and appear on the same receipt. 2. Completely fill out all of the information requested on this claim form. 3. Cut out the original product Proof of Purchase 12-digit UPC bar code from both the qualifying Canon Photo Printer or All-In-One box AND (if purchased) the PowerShot Digital Camera box. If you purchased an eligible Canon Digital Camcorder, cut out the original PictBridge logo from the Camcorder box. See sample 12-digit UPC bar code and PictBridge logo above. Original UPC bar code from the laptop or desktop computer box (if purchased) is not required for this offer. 4. Attach a legible copy of your dated sales receipt showing the qualifying Canon Photo Printer or All-In-One purchased together with the PowerShot Digital Camera or eligible Canon Digital Camcorder or the desktop or laptop computer. Store name must appear legibly on the receipt. 5. Circle the date of purchase and the qualifying purchases on the receipt. 6. Make copies of all required documentation for your records. 7. Mail the completed rebate claim form, original Proof of Purchase 12-digit UPC bar code(s) from the qualifying Canon Photo Printer or All-In-One box and (if purchased), the PowerShot Digital Camera box, and (if purchased), the original PictBridge logo from the Canon Digital Camcorder box, and a legible copy of your sales receipt to the address below. Mail to: Dept. 70195, PIXMA Printer $50 Bundle MIR, P.O. Box 13199, Scottsdale, AZ 85267 Please provide the following information: