Reviews & Opinions
Independent and trusted. Read before buy Canon Pixma IP1000!

Canon Pixma IP1000

Manual

Download (English)
Canon Pixma IP1000 Printer, size: 4.3 MB
Instruction: After click Download and complete offer, you will get access to list of direct links to websites where you can download this manual.

About

Canon Pixma IP1000About Canon Pixma IP1000
Here you can find all about Canon Pixma IP1000 like driver and other informations. For example: cartridge, manual, printer driver download, waste ink absorber, printer driver free download, printer, installer, ink cartridges.

Canon Pixma IP1000 manual (user guide) is ready to download for free.

On the bottom of page users can write a review. If you own a Canon Pixma IP1000 please write about it to help other people.

 

[ Report abuse or wrong photo | Share your Canon Pixma IP1000 photo ]

Video review

a problem with canon pixma ip1000

 

User reviews and opinions

<== Click here to post a new opinion, comment, review, etc.

Comments to date: 8. Page 1 of 1. Average Rating:
DrAxeman 4:05am on Monday, October 25th, 2010 
Initially, when I brought it, it was like WoW what a bargain, look at the quality.. Good color, good quality, cheap Waste ink
shh 6:47pm on Saturday, October 16th, 2010 
i cant use my printer bec i dont have the cd of the software plase help we with this by sending me the software on my e-mail plase none none
quote 7:49pm on Sunday, August 29th, 2010 
Order to replace my old Canon S-400 printer which was broken for the reason that it is the cheapest Canon printer available in store. On the one hand,...
skeen 12:45pm on Monday, June 14th, 2010 
best little printer around cartridges are easy to refill yourself cant get them now?
Hari Seldon 8:14am on Tuesday, May 18th, 2010 
Great Printer **** Great Price I brought this printer for my young daughter to use as she was constantly draining the ink of my HP printer. Great Printer **** Great Price I brought this printer for my young daughter to use as she was constantly draining the ink of my HP printer.
bmihelac 8:23am on Thursday, May 13th, 2010 
I got this little printer when I started university because I knew that I would be scarce of space and needed something cheap and light to be able to ...
thom314 12:33am on Wednesday, April 14th, 2010 
affordable price at MYR 160 (USD 40), good print quality ink runs out very fast (major prob), noisy, no output tray, no usb cable bundled
mbl 3:34am on Thursday, April 1st, 2010 
Hi to all! I own this printer with my desktop PC and used its services for more than could have been used. I got this little printer when I started university because I knew that I would be scarce of space and needed something cheap and light to be able to ...

Comments posted on www.ps2netdrivers.net are solely the views and opinions of the people posting them and do not necessarily reflect the views or opinions of us.

 

Documents

doc0

PIXMA iP1500 SERVICE MANUAL
Copyright 2004, Canon U.S.A. This technical publication is the proprietary and confidential information of Canon U.S.A. which shall be retained for reference purposes by Authorized Service Facilities of Canon U.S.A. Its unauthorized use is prohibited.
1. PRODUCT LIST 1-1. Main Units
Product name Canon Bubble Jet Printer iP1500 Product code 9319A001AA 9319A002AA 9319A003AA 9319A004AA 9319A005AA 9319A005AB 9319A008AA 9319A009AA 9319A010AA 9319A011AA 9319A012AA 9319A013AA 9319A014AA 9319A015AA 9319A017AA 1-2. Options None 1-3. Consumables Product name Canon Ink Tank BCI-24 Black Product code 6881A001AA 6881A002AA 6881A003AA 6881A004AA 6882A001AA 6882A002AA 6882A003AA 6882A004AA 6881A008AA 6881A009AA 6881A010AA 6881A011AA 6882A008AA 6882A009AA 6882A010AA 6882A011AA Sales territory JPN EUR USA/CAN ASIA/AUST JPN EUR USA/CAN ASIA/AUST JPN EUR USA/CAN ASIA/AUST JPN EUR USA/CAN ASIA/AUST Remarks In common with the S200, S200x, S300, S330, i320, i350, i355, i250, and i255 US CA LAM LVT LAM HVT EMB EMB ASA HVT AU KR GB JP TW HK CN EUM Sales territory Remarks
Canon Ink Tank BCI-24 Color
Canon Ink Tank BCI-24 Black Twin Pack
Canon Ink Tank BCI-24 Color Twin Pack

( 2 / 21 )

2. PRODUCT SPECIFICATIONS 2-1. Printer Main Unit Specifications
Paper feeding method Resolution Printing speed
HQ HS BK CL BK CL ASF 4,800 x 1,200 dpi (max.) Measured by throughput patterns Fine_BK and Fine_CL. 13.2 ppm (BK throughput pattern) 6.8 ppm (CL throughput pattern) 18 ppm 13 ppm (BK throughput pattern) (CL throughput pattern)
Printing direction Draft mode print duty Print width Interface Supported print head No. of pages that can be printed
Bi-directional / Uni-directional (automatically switched according to print data and print mode) 50% duty 203.2 mm (8 inches) USB (2.0) Full Speed only Service part: QY6-0054-000 CL approx. 170 pages, BK approx. 520 pages (SCID No.5 pattern, default print mode) BK approx. 300 pages (1500 character pattern, default print mode)
2 Max. 10 mm (Approx. 100 pages of 75 g/m ) 64 to 105 g/mmm or less
ASF stacking capacity Paper weight
Plain paper High Resolution Paper Glossy Photo Paper Photo Paper Pro, Photo Paper Plus Glossy, Matte Photo Paper, Photo Paper Plus Semi-gloss Photo Paper Plus Double Sided Transparency Envelope T-shirt Transfer Photo Stickers
10 mm (Approx. 80 sheets) or less A4, LTR: 4x6: A4, LTR, 5x7: 4x6: 1 sheet 30 sheets or less 10 sheets or less 1 sheet 1 sheet Up to A4, LTR Available Available Not available Available Not available Available Available (Detected by dot counting. Reset by user operation. Enabled at default.) Available (11 types) Approx. 43 dB (Sound pressure level ISO9296) Approx. 46 dB Approx. 55 dB Temperature: Humidity: Temperature: Humidity: 5C to 35C (41F to 95F) 10% to 90%RH (no condensation) 0C to 40C (32F to 104F) 5% to 95%RH (no condensation) 10 sheets or less 20 sheets or less 10 sheets or less 20 sheets or less
Borderless printing Detection function
Cover open Presence of print head Presence of ink tank Presence of paper Paper width Waste ink absorber full Remaining ink amount
Print head alignment Acoustic noise level
Fine (Glossy Photo Paper / Fine mode) HQ HS
Environmental requirements
During operation Non-operation

( 3 / 21 )

Power supply
AC 100 to 127 V, 50/60Hz (LV) AC 220 to 240 V, 50/60Hz (HV) Power consumption: During printing Approx. 8 W Stand-by status Approx. 1 W Input voltage / Frequency

External dimensions

With the paper support extended (no paper output tray) With the paper support retracted (no paper output tray) Approx. 416 (W) x 250 (D) x 305 (H) mm Approx. 416 (W) x 207 (D) x 165 (H) mm Approx. 2.5 kg (excluding the print head and ink tanks) VCCI, FCC, IC, CE Mark, Taiwan EMC, C-Tick, CCC (EMC), Korea MIC, Gost-R, DENAN, UL, C-UL, CB Report, GS, FT, SASO, SPRING, Korea EK, IRAM

Weight Related standards

Electromagnetic radiance, Electrical safety Note: Not Blue Angel compliant.
2-2. Product Life Specified print volume or the years of use, whichever comes first. - 3 years of use - Print volume: 4,000 pages - Black: 2,000 pages (A4, standard mode, 1,500 character pattern) - Color: 1,200 pages (A4, 7.5% duty per color pattern) 120 pages (A4, photo, borderless printing) 80 pages (4 x 6, photo, borderless printing) 600 pages (Postcard, photo, borderless printing) Note: The above print volume breakdown is estimated using average user consumption patterns. 2-3. Print Head Specifications Type Print head 4-color integrated type (ink tank separate type) BK: 320 nozzles in 2 vertical lines C/M/Y: 128 nozzles in 2 vertical lines per color Ink droplet: BK 30 pl, CL 5 pl / 2 pl BK (pigment-based ink) CL: Y, M, C (high brilliance) BCI-24 Black, BCI-24 Color Approx. 58g (excluding ink tanks) Service part (excluding ink tanks) Part number: QY6-0054-000
Ink color Ink tank Weight Supply method
Print head life 4,000 pages (Same as the printer main unit) Note: Although the print head can be physically installed in the i350, i355, i250, i255, S300, and S330 series printers, it is incompatible with and cannot be used in those models.

( 4 / 21 )

ERROR DISPLAY Errors are displayed by the LEDs, and ink low warnings are displayed by the Status Monitor.
3-1. Operator Call Error (LED Blinking in Orange) LED Error blinking 2 times Paper out
3 times 4 times 5 times Paper jam Ink tank not installed Print head not installed or failure has occurred in the print head. (Non-supported print head (see page 4) is installed or print head EEPROM data is abnormal.) Waste ink absorber full or platen waste ink absorber full warning (approx. 95% of the maximum capacity)
Corrective action Set paper, and press the Resume/Cancel button to feed the paper. Remove the jammed paper, and press the Resume/Cancel button. Re-install the ink tanks, and close the access cover. Install the print head, and close the access cover. Or, confirm the print head is QY6-0054-000 and perform re-installation. If not recovered, with the print head installed, power the printer off and on. Pressing the Resume/Cancel button will exit the error, and enable printing.

8 times

3-2. Service Call Error (LED Blinking in Orange and Green Alternately) LED Error Corrective Action blinking 2 times Carriage error Replace the printer as it has failed. 3 times LF error Replace the printer as it has failed. 7 times Waste ink absorber full or platen waste ink Replace the printer as it has failed. absorber full 8 times Print head temperature rise error Replace the printer as it has failed. 9 times EEPROM error Replace the printer as it has failed. 10 times No print head detected excepting print head Replace the printer as it has failed. replacement (during printing)

( 5 / 21 )

3-3. Ink Low Warning (Ink low warnings are displayed by the Status Monitor only when the remaining ink level detection is enabled, and no Status Monitor display when disabled.) Note: The Status Monitor display in the table below is for Windows. Warning Display by Status Monitor
Ink low warning 1 (approx. half level)
Ink low warning 2 (low remaining ink)
Ink low warning 3 (ink level unknown)

( 6 / 21 )

4. SERVICE MODE To conduct the following functions, a host computer (Windows 98 / ME / 2000 / XP), printer driver and service tool (QY9-0066) for the iP1500 are needed.
Function Print head manual cleaning <For reference> Print head deep cleaning Paper feed roller cleaning Procedure Select Cleaning from the printer drivers Maintenance. Select Deep Cleaning from the printer drivers Maintenance. Remarks Cleaning time: Approx. 40 sec. Cleaning time: Approx. 70 sec.
Cleaning time: Approx. 2 min. 1. Remove the paper from the ASF. 2. Select Roller Cleaning from the printer drivers Maintenance. 3. Following the instruction from the Status Monitor, load 3 sheets of plain paper in the ASF, and feed them.
Test printing Nozzle check pattern printing 1) Nozzle check pattern printing Select Nozzle Check from the printer drivers Maintenance. <For reference> 1. Select Print Head Alignment from the printer drivers Significant misalignment can be Print head alignment adjusted. Maintenance. 2. Select the optimal value using the printed head position adjustment pattern. Refer to Shipment inspection pattern*1 below. 2) Shipment pattern printing - ROM version - Number of pages fed - Waste ink amount EEPROM reset Refer to EEPROM reset / Destination setting*3 below. (Reset of waste ink counter etc.) Destination setting Refer to EEPROM reset / Destination setting*3 below. EEPROM information check Refer to Shipment inspection pattern*1 below. Refer to Shipment inspection pattern sample*2 below. Host computer and service tool are required. Host computer and service tool are required. Host computer and service tool are required. Host computer and service tool are required.

*1 Shipment inspection pattern printing a. Install the print head (QY6-0054-000), and press the Power button to turn on the printer. (The LED lights in green.) b. Load A4-sized paper. c. Connect the printer to the computer. Using the iP1500 service tool (QY9-0066), select USB PORT. (See APPENDIX 2, ip1500 SERVICE TOOL.) d. Select TEST PATTERN 1. The printer starts printing the shipment inspection pattern.
2 * Shipment inspection pattern sample EEPROM contents can be confirmed from the shipment inspection pattern printout (top of the shipment inspection pattern). See APPENDIX 1, SHIPMENT INSPECTION PATTERN 1, for print sample.
*3 EEPROM reset / Destination setting a. Install the print head (QY6-0054-000), and press the Power button to turn on the printer. (The LED lights in green.) b. Connect the printer to the computer. Using the iP1500 service tool (QY9-0066), select USB PORT. (See APPENDIX 2, iP1500 SERVICE TOOL.) c. <Destination setting> Destination can be set by clicking each model name in SET DESTINATION. Confirm the model name by clicking GET DEVICE ID after setting change. (If incorrect, it can be changed before turning the unit OFF/ON.) <EEPROM reset> When EEPROM CLEAR is checked, the EEPROM is reset after the shipment inspection pattern printing.

( 7 / 21 )

5. EXTERNAL VIEW / PARTS LIST 5-1. External Parts, Power Supply Unit, Logic Board Assy

5-2. Print Unit

( 8 / 21 )

Parts List

Key Part Number QY6-0054-16 S1 S2 S3 QC1-4988-000 QM2-1428-000 QC1-4991-000 QC1-5005-000 QC1-5009-000 QC1-5019-000 QM2-1441-000 QM2-1477-000 QK1-0756-000 QK1-0757-000 QC1-5104-000 QC1-4998-000 QC1-1690-000 QM2-1445-000 QM2-1443-000 QC1-4975-000 QC1-4976-000 QM2-1847-000 XA9-1493-000 XB6-7300-605 XB1-2300-405 Rank K J J J J J J I I I N I I I I I I I I G G G Qty 1 PRINT HEAD PAPER SUPPORT UPPER COVER UNIT, WITH BUTTON COVER, I/F EMBLEM (E) EMBLEM (J) LABEL, PIXMA (E) FRONT COVER LOGIC BOARD ASSY AC ADAPTER: 100/120V 50/60HZ AC ADAPTER: 220/240V 50/60HZ FILM, TIMING SLIT STRIP SPRING, TIMING SLIT STRIP FILM LOCK LEVER.BLADE CAP UNIT BLADE UNIT ABSORBER 1, INK ABSORBER 2, INK ABSORBER, PLATEN SCREW, TP M3X8 SCREW, TP M3X6 MM SCREW, M3X4 MAIN WASTE INK ABSORBER 1 MAIN WASTE INK ABSORBER 2 PLATEN WASTE INK ABSORBER FOR AC ADAPTER FOR UPPER CASE UNIT FOR LOGIC BOARD ASSY FOR LF MOTOR FOR TIMING SLIT STRIP FILM SPRING C C C C C C LV HV (EUR/ASIA/AU/KR/HK/GB/EUM) B B Description Remark Common parts B

Power cables:

QH2-2720-000 QH2-2724-000 QH2-2725-000 QH2-2726-000 QH2-2727-000 WT3-5156-000 WT3-5160-000 WT3-5182-000 S S S S S S S S CORD, POWER CORD, POWER CORD, POWER CORD, POWER CORD, POWER CORD, POWER CORD, POWER CORD, POWER 120V (LAM-LV) 100V-120V (JP) 100V-120V 220V-240V 220V-240V (AU) 220V-240V (GB, HK) 220V-240V (KR) 220V-240V (CHN) A B A A A A A A

A: In common with the iP2000 and iP1000 B: In common with the iP2000 C: In common with the iP1000

( 9 / 21 )

TROUBLESHOOTING FLOWCHART

Power ON

Service Call Error? No Open access cover, and install print head
Service Call Error? No Connect to computer
Shipment inspection pattern printing
See 4. SERVICE MODE for printing method.
< Shipment inspection pattern check items> (See APPENDIX 1, SHIPMENT INSPECTION PATTERN 1.) 1. Non-ejection of ink: 2. Top of form: 3. Vertical lines: Yes Off the paper Not connected White lines / uneven density NG NG NG NG

Correct? Yes

No Replace print head and print shipment inspection pattern No

4. Gray area:

Main waste ink counter less than 7%? Yes
No Visually check the platen waste ink absorber, and replace it if it is soiled.

Normal

Defective
6-1. Printer Main Unit Troubleshooting Flowchart (how to confirm printer operation at refurbishment) <Note for normal printer refurbishment> At end of refurbishment, set the printer to the default shipment conditions (with the paper lifting plate in the raised position, and the carriage locked in the home position), following the steps below. 1. Install the print head, and while pressing and holding the Power button, connect the AC plug. After the LED lights in green, with the Power button still pressed, press the Resume/Cancel button 2 times, and release both the Power and Resume/Cancel buttons. (Each time the Resume/Cancel button is pressed, the LED lights alternately in orange and green, starting with orange.) 2. Print the shipment inspection pattern, and reset the EEPROM, following the procedures in 4. SERVICE MODE. 3. Press the Power button to turn off the printer. (The paper lifting plate is raised, and the carriage moves to the print head replacement position.) Remove the print head. (DO NOT print after this point.) ( 10 / 21 )
6-2. Print Head Troubleshooting Flowchart (print head operation confirmation)

Connect to computer

Nozzle check pattern printing
Correct? No Print head cleaning
See 4. SERVICE MODE for cleaning method.
Correct? No Print head deep cleaning

Correct? No

Print head deep cleaning
Correct? No Replace ink tanks

( 11 / 21 )

7. SPECIAL NOTES ON SERVICING 7-1. Resetting the Main and Platen Waste Ink Counters The counters for the main waste ink absorber and the platen waste ink absorber can be reset separately. At waste ink absorber replacement, using the iP1500 service tool, reset the applicable waste ink counter(s). (When both the main and platen waste ink absorbers are replaced, reset both the main and platen waste ink counters.)

<Waste ink absorber replacement procedures> 1. Error check At a waste ink full error (95% or full), identify which waste ink abosrber is full, the main or the platen, using the iP1500 service tools EEP-ROM INFORMATION, Dd or Ds values, as the error itself does not indicate which waste ink absorber is full. (See APPENDIX 2, iP1500 SERVICE TOOL, for details). Then, replace the applicable waste ink absorber. - Dd: Main waste ink absorber amount (128,400 mg at 95% full, 135,200 mg at full) - Ds: Platen waste ink absorber amount (7,220 mg at 95% full, 7,600 mg at full) 2. Resetting the replaced waste ink absorber counter - At main waste ink absorber replacement: In the iP1500 service tool CLEAR WASTE INK COUNTER section, click MAIN to reset the main waste ink counter value. - At platen waste ink absorber replacement: In the iP1500 service tool CLEAR WASTE INK COUNTER section, click PLATEN to reset the platen waste ink counter value.

( 12 / 21 )

7-2. Servicing in Asia - Elimination of Major Component Connectors on the Logic Board Assy In the iP1500, the LF and CR motors and the LF encoder are soldered to the logic board assy, and the connectors which were used in prior models are eliminated. In addition, the CR flexible cable is soldered to the print head to eliminate the connector. (However, in peak periods of production, instead of soldering, the connector may be used for the CR flexible cable on the print head side.) <Special notes on servicing> In replacing the logic board assy, remove the solder from the backside of the logic boards LF motor, CR motor, and LF encoder cable connections, and re-solder them to the replaced logic board assy. Regarding the CR flexible cable, as servicing is to be conducted by replacement of the print unit, no solder removal or re-soldering of the cable itself is required. Logic Board Assy
CR Flexible Cable (Print Head Side)

( 13 / 21 )

8. PRODUCT TECHNICAL INFORMATION 8-1. FAQ (Problems specific to the iP1500 and corrective actions)
No. 1 * A Function Phenomenon Possible Call / Claim Corrective action - LED blinks alternately in orange and Remove the packing material fixing the Installation Carriage error (LED blinks carriage. alternately in orange and green 2 green, 2 times (carriage error). times). Cause The user may not have removed the packing material at unpacking and installation. Although a caution sheet is packaged together with the printer, the user may not have noticed it. Note: Even if the packing material remains, no parts are damaged. Open the access cover, and install the ink Since the user did not seat the ink tanks - LED blinks in orange 4 times (ink tanks properly. completely at unpacking, installation, or tank installation error). (As this ink tank replacement, the ink tank occurs at printer installation, the user contacts the main case. cannot recognize the error.) - Paper out error - Paper cannot be fed - Cannot print - Multiple pages of paper are fed simultaneously. -Blank paper is ejected. - Paper out error - Paper cannot be fed - Cannot print 1. Perform roller cleaning from the printer driver. 2. Clean the paper feed roller with pre-moistened wipe or moistened cloth. 1. Fan the paper and set them in the ASF. 2. In case of PR-101, set the paper sheet by sheet in the ASF. 1. 2. 3. 6 B Envelope jam at feeding - Paper jam error - Paper cannot be fed - Cannot print - Paper jam error - Paper cannot be fed - Cannot print 4. 1. 2. 1. The paper feed roller slips on the paper at paper feeding.

Ink tank installation error (LED blinks in orange 4 times.)

Paper feeding

No paper feeding when a number of sheets are loaded. (PP-101) Multi-feeding

Envelope not feeding

Paper jam
In the high temperature and high humidity environment, the frictional force between the front and back sides of paper becomes high, and sheets stick to each other, contributing to multi-feeding. Perform roller cleaning from the printer The paper feed roller slips on the paper at paper feeding. driver. Note: Depending on the paper lots. This Clean the paper feed roller with phenomenon may occur in DL pre-moistened wipe or moistened envelope. cloth. Reduce the number of envelopes loaded in the ASF. Flatten the envelope (with a pen). Perform roller cleaning from the printer When the paper is fed by the slightly-slippery paper feed roller, the flap driver. is caught in the return position of the claw. Reduce the number of envelopes loaded in the ASF. Remove the jammed paper from the As the LF roller slips on the paper, the paper pick-up side. paper is not fed, causing the jam error at paper ejecting.

( 14 /21)

(8-1. FAQ (Problems specific to the iP1000 and corrective actions) contd)
No. 8 * B Function Image quality Phenomenon Smearing on printed side. Possible Call / Claim - Smear on the printed side of paper - Cannot print properly - Paper edge crease Corrective action 1. Correct the paper curl. 2. Recommend the user to conduct printing in the print quality assurance area. (In the iP1500, the head-to-paper distance cannot be changed.) 1. Perform Bottom Plate cleaning from the printer driver. 2. Clean the ribs on the platen with cotton swabs/buds. Cause The edge of paper rises due when paper is curled, causing the print head to rub against the printed surface of paper, resulting in smearing. When borderless printing is conducted continuously, ink mist attaches to the ribs on the platen, and is transferred to the backside of the following paper.
Smearing on the backside, or address side of postcards
When the paper end comes off the pinch roller, printing is performed without the paper being held, preventing the ink drops from being ejected in the correct positions, resulting in unevenness. Note: The problem is less noticeable than that of the i320. Horizontal lines or uneven print - Lines or uneven print density (on skin Change the print quality from standard to As the print media slightly slips while high mode. being fed by the LF roller, printed areas density due to LF roller feeding at tones and background) overlap, causing the problem. - Cannot print properly small pitch Horizontal lines or uneven print density at the trailing edge of paper

<Photo Paper Plus Double Sided> - Smears on the already printed side when printing the other side <When printing the address side of postcards> - Smears on the address side <When printing the message side of postcards> - Smears on the backside 1. Recommend printing in the print quality - Cannot print to the bottom edge of assurance area. paper - Lines or uneven print density appear 2. Change the print quality from standard to high mode. in the trailing edge of paper 3. Try other paper (PP-101) - Cannot print properly
*Occurrence level: A: The phenomenon is likely to occur frequently. (Caution required). B: The phenomenon may occur under certain conditions, but likeliness is assumed very low in practical usage. C: The phenomenon is unlikely to be recognized by the user, and no practical issues are assumed.

( 15 /21)

8-2. Major Functions (1) Borderless printing (up to A4 and LTR sizes) <Possible problems with this function> - Smearing on the address side of postcards in continuous borderless printing on the message side. -> Perform Bottom Plate cleaning, and clean the ribs on the platen. - Smearing on the backside of paper in continuous borderless printing. -> Perform Bottom Plate cleaning, and clean the ribs on the platen. - Ink mist on the platen. -> Perform Bottom Plate cleaning, and clean the ribs on the platen.
(2) No paper selection lever The printer does not need adjustment via a paper selection lever. (Adjustment of the head-to-paper distance when printing envelopes is not necessary.) <Possible problems with this function> - The head rubs against the paper when the amount of paper curl is large. -> Flatten curled paper (to less than 3 mm). -> In print modes other than borderless printing, conduct printing in the print quality assurance area of the top and bottom edges. (Top margin 28 mm, bottom margin 26.5 mm) (3) Quiet mode The printer has a quiet mode function. Compared with the normal mode, Acoustic noise level: Slightly lower. (HQ, normal: Approx. 43.4 dB, Quiet: Approx. 42.8 dB) Audible overtone level: Sound quality changes, and sound becomes quieter. Print speed: Slows. (BK printing in HQ/HS mode using an acoustic noise measurement pattern: Approx.1.3 times) <Possible problems with this function> - The operation sound does not become quieter. ->The audible sound becomes only slightly quieter. - Printing is slow. -> Disable the Quiet mode. (4) Remaining ink level detection function The printer has a function to detect the remaining ink level. (Default setting: ON) Detection method: Dot counting (Counted for each BK/CL ink tank) CL tank: The remaining ink level is detected by total counted dot values of 3 colors of ink. Display method: Displayed on the Status Monitor (at 3 levels listed below for each BK/CL ink tank) Level 1: Half level of remaining ink level (Approx. 40% of ink remaining) Level 2: Indication of ! mark (Approx. 10% of ink remaining) Level 3: Indication of ? mark (Remaining ink level is unknown, ink may be used up anytime) Note: Remaining ink detection function displays the status only, and does not cause errors.

( 16 / 21 )

The margin of error of detection accuracy is +/-10% in normal printing. The margin of error is likely to be large in the following specific print patterns: When printing continuously using any one of the CMY colors of ink -> As the remaining ink level is calculated by total counted dot values of 3 colors of ink, if any of the C/M/Y inks is heavily consumed, the margin of error for remaining ink increases. When performing continuous BK solid printing -> With continuous printing, ink flow from the tank to the ink chamber can be interrupted, after which ink remains unused in the tank. Reset procedure: Perform the following operations from the printer drivers Maintenance: 1. In Low Ink Warning Setting, enable Display low ink warning. 2. In Ink Counter Reset, reset the applicable ink counter(s). Note: Be sure to reset the ink counter from the printer drivers Maintenance after replacing ink tanks. <Possible problems with this function> - Due to user error, the actual remaining ink level does not match the indicated remaining ink level, resulting in ink out, etc. User error: Forgetting to reset the ink counter / ink counter reset other than when replacing ink tanks. - Due to the specific print pattern, the actual remaining ink level does not match the indicated remaining ink level, resulting in ink out. Specific print pattern: Continuous printing using any one of the CMY colors of ink / continuous BK solid printing, etc. (5) Print head deep cleaning The printer has a print head deep cleaning (refreshing) function. Print head deep cleaning (refreshing): This is a deep cleaning function in order to resolve print failure due to ink clogging the print head. (The black ink is pigment-based, and clogs easier than other dye-based ink.) Perform from the printer drivers Maintenance. <Possible problems with this function> - Excessive ink consumption when conducting print head deep cleaning repeatedly. (The amount of ink used is approx. 10 to 15 times the normal manual cleaning amount.) <Reference> Cleaning types, amount of ink used, and time required BK and CL ink drawing is simultaneously performed. Cleaning type Amount of ink used Manual cleaning BK: Approx. 0.12 g Dot count cleaning CL: Approx. 0.14 g Timer cleaning (24 hours to 2 weeks) Print head replacement BK: Approx. 0.42 g Ink tank replacement CL: Approx. 0.52 g Cleaning when the print head is not capped at printer power on Cleaning on arrival at user BK: Approx. 0.42 g Timer cleaning (2 weeks to 3 months) CL: Approx. 0.52 g Print head deep cleaning BK: Approx. 1.5 g Timer cleaning (3 months or more) CL: Approx. 2.2 g

Accuracy:

Time required Approx. 40 sec.
Approx. 45 sec. Approx. 60 sec. Approx. 70 sec.

( 17 / 21 )

(6) Print head alignment The printer has a print head alignment function (print head position adjustment function). As it is not necessary to perform print head alignment at setup or installation of the printer, the function is only briefly introduced at installation. Print head alignment: This is a function to correct displacements between the nozzle lines of the print head, and incorrect print position at bi-directional printing. The adjustment is conducted using the printed head position adjustment pattern. A: Print head alignment between black even and odd nozzles B: Print head alignment between cyan even and odd large nozzles C: Print head alignment between magenta even and odd large nozzles D: Print head alignment between cyan even and odd small nozzles E: Print head alignment between magenta even and odd small nozzles F: Print head alignment in bi-directional black printing G: Print head alignment of large nozzles in color bi-directional printing H: Print head alignment between black and photo black nozzles I: Print head alignment of small nozzles in color bi-directional printing J: Print head alignment between color large and small nozzles K: Print head alignment between magenta large and small nozzles Perform from the printer drivers Maintenance. (At initial set-up by the user, notice to perform the print head alignment is displayed in the Status Monitor.) <Possible problems with this function> - The line is not straight. -> Perform print head alignment from the printer driver. - Printout is granulated. -> Disable the Quiet mode.

( 18 / 21 )

APPENDIX 1:
SHIPMENT INSPECTION PATTERN 1
Check item 1 (Non-ejection of ink): Total area of the sample below Check item 2 (Top of form)
Print EEPROM information -> See below for details.

BK nozzle check pattern

C nozzle check pattern M nozzle check pattern Y nozzle check pattern

Check item 3 (Gray area)

Check item 4 (Vertical lines)
Paper size: A4 <EEPROM information print>

Model name ROM version Main ink absorber waste ink amount (%)
IP1500 P=V X.XX D=XXXXX.X Page=XXXX PL=XXXX ,HR=XXXX ,GP=XXXX ,CA=XXXX ,BL=XXXX SettingTime=XXXX / XX / XX XX:XX YY YY YY YY USB= (YYYYYY)

Installation time

Number of sheets fed Page: Total PL: Plain paper PR: PR-101, PP-101, MP-101 CA: Postcard, inkjet postcard, glossy photo card BL: Borderless printing (counted separately from the count by paper type)

( 19 / 21 )

APPENDIX 2:

iP1500 SERVICE TOOL

<How to use the iP1500 Service Tool (QY9-0066)> Usage:Shipment inspection pattern printing/Destination setting in EEPROM/EEPROM reset Supported OS:Windows 98 / ME / 2000 / XP (J/E version) : QY9-0066 Distribution method:Provided by SSIS (Download iP1500 Service Tool from software download in SSIS.) <Usage procedures> 1. Unzip iP1500tool_V100.EXE. (Double-click to unzip the file.) 2. Open the iP1500tool_V100 folder created after unzipping. 3. Open GeneralTool.exe.

A B C D E G H F

4. Select the connected USB port number from USB PORT (A). <How to print the shipment inspection pattern> 1. Select TEST PATTERN 1 (B), and the shipment inspection pattern 1 will be printed. (Refer to APPENDIX 1, SHIPMENT INSPECTION PATTERN 1.) <How to set the destination> 1. In SET DESTINATION (C), select the applicable model name. iP1500J for Japan model iP1500E for non-Japan models 2. Click DEVICE ID (D), and confirm the model name indicated in the (E) area (iP_1500 for iP1500J, iP1500 for iP1550E). Or, confirm the model name on the shipment inspection pattern printout. <How to reset EEPROM> After marking the EEPROM CLEAR check box, perform the shipment inspection pattern printing. The EEPROM will be reset.

( 20 / 21 )

<How to reset the waste ink counter> In CLEAR WASTE INK COUNTER (G), select MAIN or PLATEN. The selected waste ink counter will be reset. MAIN resets the main waste ink counter. PLATEN resets the platen waste ink counter. If both the main and platen waste ink absorbers are replaced, reset both the main and platen waste ink counters. <How to confirm EEPROM information details> Click EEP-ROM INFORMATION (H). The EEP-ROM INFORMATION dialog box will open to display EEPROM information details.

( 21 / 21 )

 

Tags

KDL-26V4710 Lowrance X135 P5LD2 XM-ZR604R Thinkpad X21 67160 T GPS-5V1 PA 800 Venture 2002 Applications IS450 Presets Panel CDX-F5510 F150-3 MVX4I C3000 JVC A-X2 LE26R82B Nokia 3510 4000 ED CJ1W-nc213 Printer Driver Free Download 512SC KX-T7550 Desktop DSP1000P MD-105TX P5750DVD 41006002A SA-6500II Di LD RH399H MX2500 01 BC-119N PSR-8 SRU5030 Scpt570 Nuvi 1210 40458 KDL-40EX709 CU-E12HKE 32PFL7403D 12 Computer Printer Edition TIN XC700 FE-330 WM2487HWM CPD-E200 Head Spot FS-1030D IP-901 29PT8508 1LE031SLX Chorus V Samsung Yepp Seals Triax Fury Sx 50 STR-DN2010 PL-X88Z Cjs25INV RM-V60 Manual CE1000-T Mf4120 SUP021R CT-939MK2 S3000 RX-V990 NAS-M90HD CAR 300 CDX-M850MP RL33sbms GC4410 ZHF470X WD-10151TP Printer Driver Download Makita 6410 A E ZE-MC294 Waste Ink Absorber CVA-1004 Ink Cartridges CCD-TRV25 S500I Quadraverbgt Installer Chrono G-DEC Exec SGH-M140 Cartridge EMP-1715 KEH-P6600RS Tutorial CW-29Z418P Xv-dv252 1000 S Crossover Canon FS20 Daytona 650 MD-SR50 SX100 DP-01FX Armada 1750 MY201X GR-B197GVC

 

manuel d'instructions, Guide de l'utilisateur | Manual de instrucciones, Instrucciones de uso | Bedienungsanleitung, Bedienungsanleitung | Manual de Instruções, guia do usuário | инструкция | návod na použitie, Užívateľská príručka, návod k použití | bruksanvisningen | instrukcja, podręcznik użytkownika | kullanım kılavuzu, Kullanım | kézikönyv, használati útmutató | manuale di istruzioni, istruzioni d'uso | handleiding, gebruikershandleiding

 

Sitemap

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101