Part 1

MAINTENANCE

1. MAINTENANCE

1-1. Adjustment, Periodic Maintenance, Periodic Replacement Parts, and Replacement Consumables by Service Engineer
(1) Adjustment Adjustment EEPROM initialization (EEPROM settings) Timing Purpose None. Tool Approx. time 1 min.
At logic board ass'y replacement To initialize settings other than the following: - USB serial number - Destination setting - Waste ink counter - CD / DVD correction value At logic board ass'y replacement To set the destination.
Destination settings (EEPROM settings) LCD language settings Waste ink counter resetting (EEPROM settings)
None. Perform in the service mode. None. None. Perform in the service mode.

1 min.

At logic board ass'y replacement To set the language to be displayed on the LCD. - At logic board replacement - At waste ink absorber replacement To reset the waste ink counter.

1 min. 1 min.

CD / DVD - At logic board replacement detection sensor - At carriage unit replacement light volume correction*1 Ink system function check - At logic board replacement - At platen unit replacement - At carriage unit replacement At paper feed motor replacement - At carriage unit replacement - At PR shaft ass'y replacement - At CL base or CL gear replacement
To correct the light volume for the CD / DVD detection sensor.
None. (Automatically performed in the service test print) None. Perform in the service mode. None.

2 min.

To maintain detection functionality for presence of the ink tanks and each ink tank position. To adjust the belt tension. (Position the paper feed motor so that the belt is stretched tight.) - To maintain sliding properties of the carriage shaft and the lift cam shaft. - To protect the printer's sliding portions (gears).
Paper feed motor position adjustment*2 Grease application

5 min.

- FLOIL KG107A (QY90057)
Note: DO NOT loosen the red screws at both ends of the carriage shaft, securing the print head position, as they are not re-adjustable. *1: Only for CD / DVD printing supported regions. *2: The red screws securing the paper feed motor may be loosened only at replacement of the paper feed motor unit. (2) Periodic maintenance No periodic maintenance is necessary. (3) Periodic replacement parts There are no parts in this printer that require periodic replacement by a service engineer. (4) Replacement consumables
There are no consumables that require replacement by a service engineer.
1-2. Customer Maintenance
Adjustment Print head alignment Timing placement. Purpose Tool - Printer buttons (automatic / manual) - Computer (automatic settings via the printer driver) Approx. time 3 min.

At print head replacement. To ensure accurate dot

Print head cleaning

When print quality is not satisfying.
To improve nozzle conditions. - Printer buttons - Computer (settings via the printer driver) To improve nozzle conditions. - Printer buttons - Computer (settings via the printer driver) ----To clean the paper feed rollers. To correct CD / DVD print position. To clean the platen ribs. ----Printer buttons

Print head deep cleaning

When print quality is not satisfying, and not improved by print head cleaning. When an ink tank becomes empty. (No ink error)

Ink tank replacement

2 min. 2 min.
Paper feed roller When paper does not feed properly. cleaning CD / DVD print At CD / DVD printing, when position necessary. adjustment Bottom plate cleaning When the back side of the paper is smeared.
Computer (application 5 min. software) - Printer buttons - Computer (settings via the printer driver) - Printer buttons - Plain paper - Printer buttons (paper feed roller cleaning) 1 min.
LCD contrast adjustment ASF sub- roller cleaning
When the LCD contrast is not desirable. When the paper fed from the ASF is smeared due to ink mist attached to the ASF sub-rollers.
To set the desirable contrast. To clean the ASF sub-rollers.

1-3. Product Life

(1) Printer Specified print volume (I) or the years of use (II), whichever comes first. (I) Print volume: 10,000 pages Black 1,500 character pattern Color A4, 7.5% duty per color pattern A4, photo, borderless printing 4 x 6, photo, borderless printing Postcard, photo, borderless printing (II) Years of use: 5 years of use 2,000 pages 1,500 pages

1,500 pages

4,500 pages 500 pages
(2) Print head Print volume: 10,000 pages Black 1,500 character pattern Color A4, 7.5% duty per color pattern A4, photo, borderless printing 4 x 6, photo, borderless printing Postcard, photo, borderless printing (3) Ink tank (target value) Pattern Ink tank used Print yield 2,000 pages 1,500 pages 1,500 pages

4,500 pages

500 pages

Black text Color chart

Photo chart
Black text: When printing the Canon standard pattern (1,500 characters per page) on A4 size plain paper, with the default settings in the Windows XP driver, using Word 2003. Color chart: When printing the ISO/JIS-SCID N5 pattern on A4 size plain paper in bordered printing, with the default settings in the Windows XP driver, using Photoshop 7.0. Photo chart: When printing the Canon standard pattern on 4" x 6" Photo Paper Plus Glossy in borderless printing, with the default settings in the Windows XP driver, using Windows XP Photo Printing Wizard. The print yield in the table above is an average value measured in continuous printing, using the ink tank immediately after it is unsealed, until the ink is out. Ink yield may vary depending on texts and photos printed, application software, print mode, and type of paper used. When the printer is turned on and while printing, each ink may be used for protecting the print head and maintaining print quality.

No ink. [1600]

Ink has run out. Replace the ink tank and close the cover.
Replace the empty ink tank(s), or Pressing the Stop/Reset press the Stop/Reset button. button will clear the error without ink tank replacement, however, ink may run out during printing.
Ink tank not installed. [1660]
The following ink tank cannot be Install the applicable ink tank(s) properly, and confirm that the recognized. LED's of all the ink tanks light red. Print head is not installed. Install Install the print head properly. the print head. The type of print head is incorrect. Install the correct print head. Inner cover is open. Close the
The print head is not installed [1401], or it is not properly installed (print head temperature sensor error [1403] / faulty EEPROM data of the print head [1405] Inner cover open.
Close the inner cover, and press
[1841]*2 Inner cover open during printing on paper. [1846]*2 Inner cover open during printing on paper (print continuable). [1851]*1 Inner cover open during printing on paper (print NOT continuable). [1856]*1
inner cover and press [OK].
the Stop/Reset button. Close the inner cover, and press the Stop/Reset button. Close the inner cover, and press the Stop/Reset button. Close the inner cover, and press the Stop/Reset button to clear the error. The paper being printed at error occurrence will be ejected without printing the remaining data for the ejected paper, then printing will resume from the next page.
Inner cover closed during CD / DVD printing (print continuable). [1850]*1 Inner cover closed during CD / DVD printing (print NOT continuable). [1855]*1
Open the inner cover, place the CD-R tray and press [OK].
Open the inner cover which functions as the CD / DVD tray feeder, set the CD / DVD tray in the feeder, and press the Stop/Reset button. Open the inner cover, and press the Stop/Reset button to clear the error. The CD or DVD being printed at error occurrence will be ejected without printing the remaining data for the ejected CD or DVD, then the next print job will be done. Replace the wrong ink tank(s) with the correct one(s). Install the ink tank(s) in the correct position.
Multiple ink tanks of (Applicable ink tank icon) the same color installed. More than one ink tank of the [1681] following color is installed. Ink tank in a wrong position. [1680] Warning: The waste ink absorber becomes almost full. [1700] Some ink cartridges are not installed in place.
The service call error, indicating the waste ink absorber is full, is likely to occur soon.
The waste ink absorber is almost Press the Stop/Reset button. full. Press [OK] to continue but early replacement recommended. <See manual> Remove the cable between the camera and the printer.
The connected digital Incompatible device detected. camera or digital video Remove the device. camera does not support Camera Direct Printing. [2001] Automatic duplex printing cannot be performed. [1310]

Service call errors are indicated by the number of cycles the Alarm and Power LEDs blink, and the corresponding error code is displayed on the LCD. Cycles of blinking in orange (Alarm LED) and green (Power LED) 2 times

Error [Error code]

Conditions
Solution (Replacement of listed parts, which are likely to be faulty)

Carriage error [5100]

An error occurred in the carriage encoder signal.

3 times

Line feed error [6000]
An error occurred in the line feed signal.
- Carriage unit (QM2-2298) - Timing slit strip film (QC1-6394) - Logic board ass'y (QM22745)*1 - Carriage motor (QK11500) - Timing sensor unit (QM22683) - Timing slit disk film (QC1-6229) - Feed roller ass'y (QL20925) - Platen unit (QM2-2313)

4 times

Purge cam sensor error [5C00] ASF (cam) sensor error [5700] Internal temperature error [5400] Waste ink absorber full [5B00] Print head temperature rise error [5200] EEPROM error [6800] Carriage lift mechanism error [5110]
An error occurred in the purge unit.
- Logic board ass'y (QM22745)*1 - Paper feed motor (QK11502) - Purge unit (QM2-2299) - Logic board ass'y (QM22745)*1 - Sheet feed unit (QM22312) - Logic board ass'y (QM22745)*1 - Ink absorber kit (QY50147) - Print head (QY6-0063) - Logic board ass'y (QM22745)*1 - Logic board ass'y (QM22745)*1 - PR lift shaft ass'y (QL20936) - Sheet feed unit (QM22312) - Logic board ass'y (QM22745)*1 - Carriage lift sensor unit (QM2-2678) - Sheet feed unit (QM22312) - Logic board ass'y (QM22745)*1 - Purge unit (QM2-2208) - Sheet feed unit (QM22312) - Logic board ass'y (QM22745)*1

5 times

This error takes place when feeding paper from the ASF after an error occurred in the ASF cam sensor. The internal temperature is not proper. The waste ink absorber is full. The print head temperature exceeded the specified value. A problem occurred in writing to the EEPROM. The carriage did not move up or down properly.

Cannot specify the followings together. Change one of the settings. There are no photos in memory card. The value exceeds the number of copies you can print.
Supported image files are not in the memory card. During selecting images or specifying the number of copies, the total print quantity exceeds the prescribed value of 999. No memory card is inserted in the slot. DPOF print was selected in the menu, but no DPOF files are contained in the memory card.
The error message is displayed for a while, then the LCD automatically returns to the display before the error occurrence. The error message is displayed for a while, then disappears. After the error message is displayed for a while, the last operation before the error is cancelled, and the total print quantity returns to the value before the error. Set a memory card. The error message is displayed for a while, then the LCD automatically returns to the display before the error occurrence. The error message is displayed for a while, then disappears. Specify the print quantity. The error message is displayed for a while, then the LCD automatically returns to the display before the error occurrence. The error message is displayed for a while, then the LCD automatically returns to the display before the error occurrence. The error message is displayed for a while, then the LCD automatically returns to the display before the error occurrence. The error message is displayed for a while, then the LCD automatically returns to the display before the error occurrence.
Memory card is not set. Insert the card after checking the direction. DPOF information is not saved in the memory card.
The number of copies to print is Multi-photo print was attempted without not set. Input the number of copies. specifying the print quantity (with the print quantity left "0" (zero)). This layout is available only for In Layout print, "Mixed 1, 2, or 3" which A4 or 8.5"x11"(LTR). is available only with A4 or LTR size paper is selected, but the paper size is not set to A4 or LTR. Settings cannot be changed when With Sticker print selected, the Settings printing stickers. button was pressed.
Change the setting after removing With a memory card inserted in the slot, the card. change of the Read/Write attribute was attempted. The card is currently writeenabled. Set to read-only mode before performing operation. With the memory card set to the Read/Write mode, Card Direct printing operation was attempted from the menu.

2-4. Warnings

Warning Low ink Message on the LCD The following ink is low. Continue? (Icon of each ink tank) Yes No In Camera Direct Printing, only "Yes" can be selected. Print head temperature If the print head temperature does not fall, the rise error code "5200" is displayed, indicating the print head temperature rise error. Solution - Select Yes, and press the OK button. => Printing starts, and it is indicated on the LCD. - Select No, and press the OK button. => Printing is cancelled, and the LCD returns to the display immediately before printing was attempted. When the print head temperature falls, the error is automatically cleared. Note: If the print head temperature exceeds the specified limit when the access cover (scanning unit) is opened, the carriage does not move to the ink tank replacement position. If the print head temperature exceeds the specified limit, an intermission is inserted during printing. Re-select the supported paper type and size.
Protection of excess rise of the print head temperature Restrictions on paper Recommendation of the print head alignment (only on arrival of the printer)
If the print head temperature does not fall, the error code "5200" is displayed, indicating the print head temperature rise error. The current paper cannot be set. Change the size and type.
Head alignment required. Load paper and press - Select Yes, and press the OK button. [OK]. => Automatic print head alignment is done. Yes No - Select No, and press the OK button. => The procedures on arrival of the printer are finished. When one or more images are selected in Multi-photo print or Layout print, and if a user tries to display the menu or sub-menu, the message is displayed. - Select Yes, and press the OK button. => The image selection is cancelled, and the menu or sub-menu is displayed. - Select No, and press the OK button. => The LCD returns to the display immediately before the message was displayed. With an image trimmed, if CD / DVD print is attempted, the message is displayed. - Select Yes, and press the OK button. => The image trimming is cancelled, and the procedures for CD / DVD print are continued. - Select No, and press the OK button. => The LCD returns to the display immediately before the message was displayed.
Cancellation of image Reset the selected photo information? select information Yes No
Cancellation of trimming information
Reset trimming effect? Yes No
2-5. Troubleshooting by Symptom
Symptom Faulty operation The power does not turn on. The power turns off immediately after power-on. Solution - Confirm the connection of - the power cord, and - between the logic board and the power supply unit. - Replace the - AC adapter, or - logic board ass'y*1. A strange noise occurs. - Remove foreign material. - Attach a removed part if any. - Check the operation of the moving parts (such as purge unit, carriage unit, and paper feeding mechanism) - Replace a faulty part, if any. Nothing is displayed on the LCD. - Confirm the connection between the operation panel and the logic board. - Replace the - LCD, or - logic board ass'y*1. A portion of the LCD is not displayed. - Perform the button and LCD test in the service mode, and confirm that the LCD is displayed without any segments missing. - Confirm the connection between the operation panel and the logic board. - Replace the - LCD, or - logic board ass'y*1. Paper feed problems (multifeeding, skewed feeding, no feeding) - Examine the inside to confirm that no parts are damaged, and the rollers are clean. - Remove foreign material. - Adjust the paper guide properly. - Confirm the connection of each harness and the logic board. - Replace the - sheet feeder unit, - cassette, or - logic board ass'y*1. Carriage movement problems (contact to other parts, strange noise) - Confirm that the timing slit strip film is free from damage or grease. - Clean the timing slit strip film. - Replace the - timing slit strip film, or - carriage unit. - Remove foreign material. - Replace the - ink tank, - print head*2, or - logic board ass'y*1. - Remove foreign material from the purge unit caps,

Unsatisfactory print quality No printing, or no color ejected.
if any. - Replace the purge unit. Printing is faint, or white lines - Remove and re-install the print head. appear on printouts even after print - Replace the head cleaning. - ink tank, Line(s) not included in the print - print head*2, data appears on printouts. - purge unit, or - logic board ass'y*1. Paper gets smeared. - Feed several sheets of paper. - Perform bottom plate cleaning. - Clean the paper path with cotton swab or cloth. - Clean the ASF sub-rollers. A part of a line is missing on printouts. Color hue is incorrect. Replace the - ink tank, or - print head*2. - Replace the - ink tank, or - print head*2. - Perform print head alignment. Printing is incorrect. No ejection of black ink. Replace the logic board ass'y*1. - Replace the - ink tank, or - print head*2. - Remove foreign material from the purge unit caps, if any. - Replace the purge unit. Graphic or text is enlarged on printouts. When enlarged in the carriage movement direction: - Clean grease or oil off the timing slit strip film - Replace the - timing slit strip film, - carriage unit, or - logic board ass'y*1. When enlarged in the paper feed direction: - Clean grease or oil off the timing slit disk film - Replace the - timing slit disk film, - timing sensor unit, or - logic board ass'y*1. *1: Before replacement of the logic board ass'y, check the waste ink amount (by service test print or EEPROM information print). If the waste ink amount is 7% or more, also replace the ink absorber kit (QY5-0147) when replacing the logic board ass'y. [See Section 3-3. Adjustment / Settings, (5) Service mode, for details.] *2: Replace the print head only after the print head deep cleaning is performed 2 times, and when the problem persists.
To the table of contents <Part 1: 2. LIST OF ERROR DISPLAY / INDICATION>

3. REPAIR

3-1. Notes on Service Part Replacement (and Disassembling / Reassembling)
Service part Logic board ass'y QM2-2745 Notes on replacement*1 - Before removal of the logic board ass'y, remove the power cord, and allow for approx. 1 minute (for discharge of capacitor's accumulated charges), to prevent damages to the logic board ass'y. - Before replacement, check the waste ink amount (by service test print or EEPROM information print). If the waste ink amount is 7% or more, also replace the ink absorber kit when replacing the logic board ass'y. [See 3-3. Adjustment / Settings, (5) Service mode, for details.] Adjustment / settings After replacement: 1. Initialize the EEPROM. 2. Reset the waste ink counter. 3. Set the destination in the EEPROM. 4. Correct the CD / DVD and automatic print head alignment sensors. 5. Check the ink system function. [See 3-3. Adjustment / Settings, (5) Service mode, for details of 1 to 5] 6. Perform the print head alignment in the user mode. After replacement: 1. Reset the waste ink counter. [See 3.3. Adjustment / Settings, (5) Service mode.] Operation check - EEPROM information print - Service test print - Printing via USB connection - Direct printing from a digital camera

3-2. Special Notes on Repair Servicing
(1) External cover removal (I) Open the access cover, and release the hooks on the left and right side of the printer (indicated by the blue circles) to remove the side covers.
(II) Remove the screws (at 2 locations) and the flexible cable (at 1 location).
3-3. Resolution in Duplex Printing
3-4. Resolution in Camera Direct Printing
3-5. Resolution in Card Direct Printing
To the table of contents <Part 2: 3. PRINT MODE> To the top
4. FAQ (Problems Specific to the iP6600D and Corrective Actions)
No. * Function Phenomenon Skewed paper feeding 1 B Print results Condition - Paper feeding from the cassette, Photo Paper Plus Double Sided, 5 x 7 size Cause Due to its mechanism, contact of the PF pinch rollers to the 5 x 7 size paper is uneven, which is likely to cause skewed paper feeding. Corrective action Possible call or complaint
Change the paper - Paper feeds at feeding method an angle. from the cassette to - A margin the auto sheet appears on feeder. printouts.

B Paper feed

Improper paper - Paper feeding from feeding: the ASF - Plain paper - Multi-feeding - Skewed paper - Highest print speed (Custom setting to feeding 5) - Paper jam - In the high temperature and high humidity environment
In the high - Reduce the - Multiple temperature and amount of paper sheets of high humidity set in the ASF to paper feed at environment, paper half (approx. 5 the same becomes wavy; in time. mm high). the low - Paper feeds at temperature and an angle. low humidity - A paper jam environment, paper occurs. curls significantly. When the maximum amount - In the low of paper is set in temperature and the ASF, and if the low humidity paper-return tab environment fits in a wave or - With the maximum curl of the paper, amount of paper the tab slips and set (13 mm) does not catch paper properly, causing paper feed problems.

Print results

Skewed paper - Paper feeding from Since coaxial - Align the paper - Paper feeds at feeding (at the the ASF tolerance between guide to the paper an angle. level of +/- 1%) - Credit Card size the pinch roller and edge tighter than - A margin the LF roller, usual. appears on which determines printouts. the paper feed alignment, is 0.2mm, skewed paper feeding can occur. However, according to the field data of current models, the skewness level caused by the coaxial tolerance of 0.2mm is within the criteria of +/1%, thus the phenomenon is left as is. Soiling on the - After continuous back side of borderless printing paper (lines or of small sized streaks parallel paper (such as 4 x to the paper feed 6), when a larger direction) sized paper (such In borderless 1. Perform Bottom - Paper gets printing, printing is plate cleaning smeared. performed to the (from the - The back side size slightly larger printer driver) of paper gets than the paper size, up to 3 times*1. smeared. and ink off the

Soiling on paper The printer has been used for a long period of time with the ASF cover closed before printing is performed using the ASF. Print results
Due to ink mist Clean the ASF subattached to the ASF rollers (see *3 for sub-pick-up rollers. details.) If printing is done from the cassette with the ASF cover closed, ink mist is kept inside the printer, attaching to the ASF sub-pickup rollers. Since the subrollers usually do not contact the paper, ink mist can easily accumulate, especially during printing on smallsized paper which never contacts the sub-rollers.
- Skewed paper - SG-101 When 10 sheets of - Straighten the - Paper feeds at feeding paper are set in the paper. an angle. - Paper feeding from ASF, and if they - Set 5 or less the ASF - A margin warp significantly, sheets of paper in appears on - 10 sheets (max.) the warping the ASF. printouts. set in the ASF portions of paper get over the cover guide, not being aligned along the guide properly.
*1: Change the paper in each Bottom plate cleaning. The cleaning can end when paper does not get any soiling. *2: Locations to clean in servicing when soiling on paper in automatic duplex printing persists:
*3: How to prepare and set the ASF sub-roller cleaning sheet: 1) Fold a sheet of plain paper lengthwise in half.
2) Fold the paper at approx. 60 mm from the end, and fold the folded end in half backward, as shown below.
3) Moisten the folded end portion (indicated by the blue circle in the figure below) using a wipe, and set the paper in the ASF so that the moistened edge of the paper contacts the 2 sub-rollers. Then, fold the other end of the paper along the ASF cover edge to hook the paper to the ASF cover, as shown below.
4) Press and hold the Stop/Reset button until the Power LED blinks 3 times, then release the button to perform the paper feed roller cleaning. See "Standalone printer operation," for details. * Occurrence level: A: The symptom is likely to occur frequently. (Caution required) B: The symptom may occur under certain conditions, but likeliness is assumed very low in practical usage. C: The symptom is unlikely to be recognized by the user, and no practical issues are assumed.

Weight

Related standards (Printer, Adapter)
Serial number location Remaining ink amount detection Paper type detection
On the carriage flexible cable holder (visible on the left of the carriage after the printer is turned off and the panel cover is opened). Available (automatic detection by optical method and dot count, enabled at default) Not available

Print head alignment

Available (automatic or manual alignment via printer driver Maintenance, or via the operation panel button in Camera Direct Printing, automatic alignment at default)
*1: Only for CD / DVD printing supported regions <Direct printing> Supported memory Memory card drive card Operation Storage function Condition Function Operation panel File format Supported print paper Print quality Image correction function Image adjustment function Image processing Card Direct Printing function Image retrieval function DPOF Compact Flash TYPE I/II (3.3V), Microdrive, SmartMedia Card (3.3V only), Memory Stick, Memory Stick PRO, SD Card, MultiMedia Card, xDPicture Card*, miniSD memory card*, Memory Stick Duo*, Memory Stick PRO Duo* Via the printer buttons. Before changing the settings, the memory card must be removed. Read / Write 3.5 color LCD, 18 buttons, 4 LEDs JPEG (DCF, CIFF, Exif 2.21 or prior, JFIF), TIFF (Exif compliant), DPOF compliant [See 4, PRINT MEDIA SPECIFICATIONS] Standard, High Red-eye correction, Photo Optimizer PRO, VIVID, noise reduction, face brightener, image optimizer Brightness, contrast, hue (skin tones) Sepia, illustrated touch, no processing Available (date) Ver. 1.00 compliant Index printing, printing of an image the specified number of copies, printing of the specified image(s), printing with the shooting date Single-photo/multi-photo/all-photo printing: 1 photo per page (borderless/with borders, only with borders for plain paper) DPOF printing: 1 photo per page (borderless/with borders) 6, 15, 24, 35, 80 photos per page 30 photos per page (panorama) Index printing: 6, 15, 24, 35, 80 photos per page 30 photos per page (panorama) Layout printing: 2, 4, 8 photos per page (borderless/with borders) Postcard (borderless/with borders, with/without lines) Album (4 photos per page, right/left) Mix 3 types (for A4/LTR) Sticker printing: 2, 4, 9, 16 stickers 1, 5, 6, 7 stickers (for free-cut) CD/DVD printing*1 Information print Date, file name, and photo information printing Approx. 1 minutes 17 seconds, with the following conditions and settings:

Print layout

Throughput
- A photo from a 5 mega-pixel digital camera - 4 x 6 borderless - Exif print - Standard print quality - Process from pressing the printing start button to ejecting paper Digital cameras and digital video cameras supporting Bubble Jet Direct or PictBridge [See 4, PRINT MEDIA SPECIFICATIONS] - 1 photo per page (borderless/with borders) - Index printing (standard / multiple photos per page) - 2, 4, 9, 16 photos per page Date, file name, photo information Approx. 1 minute and 17 seconds, with the following conditions and settings: - A photo from a 5 mega-pixel digital camera - 4 x 6 borderless - Standard print quality - Process from pressing the printing start button to ejecting paper Mobile phone equipped with IrDA 1.2 port, or with Bluetooth 1.2 port (when the optional BU-20 is attached to the printer) Image (JPEG only, text printing not possible) [See 4, PRINT MEDIA SPECIFICATIONS] 1, 2, 4, 8 images per page (borderless) 1, 2, 4, 5, 6, 7, 8, 9, 16 images per page (bordered) Bluetooth version 1.2 Bluetooth Power Class 2 Good for approx. 10 m in radius (depending on interference between the communication devices, or radio wave conditions) 2.4GHz Approx. 720kbps BIP, OPP, SPP, HCRP - Windows XP Service Pack 2 or later - Windows XP Service Pack 1 or later: Microsoft "Support for Bluetooth Wireless Devices" or Toshiba Bluetooth Stack for Windows Ver. 3.00.10 or later has to be installed - Mac OS X 10.3.3 or later 18.5 (W) x 47.5 (D) x 8.7 (H) mm with a cap Approx. 7g 4.4 to 5.25V 500mW (max.) 5C to 35C (41F to 95F) 10%RHto 90%RH (no condensation)
Supported digital camera Supported print paper Print layout Camera Direct Printing Information print
Supported mobile phone Printable data Print Beam printing Supported print paper Supported layout Standard Output Communication range Frequency band Communication speed Supported profile Supported OS for HCRP Printing via Bluetooth communication (optional)
BU-20 external dimensions BU-20 weight BU-20 power supply voltage BU-20 power consumption BU-20 operating temperature BU-20 operating humidity

* Adapter required.

*1: Only for CD / DVD printing supported regions
<Print head> Type Print head Ink color Ink tank Weight (Net) Supply method Part number Single head with 6 removable ink tanks (each color) Dye-based BK / C / M / Y / PC / PM: 512 x 6 nozzles, 1,200 dpi, 1 pl / 5 pl (C / PC / M / PM), 5 pl (BK / Y) Dye-based black, cyan, magenta, yellow, photo cyan, photo magenta CLI-8BK / C / M / Y / PC / PM (dye-based) Print head, approx. 55g As a service part (not including ink tanks) QY6-0063-000

<Supported ink tanks> Model name and destination PIXUS iP6600 Japan BCI7eBK BCI7eC BCI7eM BCI7eY BCI7ePC BCI7ePM CLI8BK CLI8C CLI8M CLI8Y CLI8PC CLI8PM
Dye-based ink O X O X O X O X O X O X X O X O X O X O X O X O
Other PIXMA than iP6600 Japan O: Usable X: Not usable
Note: The ink tanks for the Japanese models are not compatible with those for the non-Japanese models. Be sure to use the appropriate ink tanks in servicing.
To the table of contents <Part 3: 3. PIXMA iP6600D Specifications>
4. PRINT MEDIA SPECIFICATIONS
<Plain paper / specialty paper> The following types of paper are recommended: Type Name Size Paper feeding method (auto) ASF, Cassette ASF, Cassette ASF, Cassette ASF, Cassette ASF, Cassette ASF ASF, Cassette ASF, Cassette ASF, Cassette ASF, Cassette ASF, Cassette ASF, Cassette ASF, Cassette ASF, Cassette ASF, Cassette ASF, Cassette ASF, Cassette ASF, Cassette ASF, Cassette ASF, Cassette ASF, Cassette ASF stacking capacity (max.) 13 mm 13 mm Approx. 80 sheets 10 sheets 20 sheets 20 sheets 10 sheets 20 sheets 10 sheets 20 sheets 20 sheets 10 sheets 20 sheets 10 sheets 10 sheets 20 sheets 10 sheets 20 sheets 10 sheets 10 sheets 30 sheets Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Camera Direct Printing Yes*2 Card Direct Printing Yes Print Beam Printing Yes

Plain paper

64 to 105 g/m2
A4, B5, LTR, A5, LGL*1 A4, LTR A4, B5, LTR A4, LTR
Super White Paper SW101/201 High Resolution Paper Glossy Photo Paper HR-101 GP-401
GP-401 4x6 101.6 x 152.4 mm GP-401 Credit Card GP-x 86 mm A4, LTR
GP-501 4x6 101.6 x 152.4 mm Photo Paper Pro PR-101 PR-101 4x6 PR-101 4x8 Photo Paper Plus Glossy PP-101 PP-101 4x6 PP-101 5x7 Matte Photo Paper MP-101 A4, LTR 101.6 x 152.4 mm 101.6 x 203.2 mm A4, LTR 101.6 x 152.4 mm 127 x 178 mm A4, LTR
MP-101 4x6 101.6 x 152.4 mm Photo Paper Plus Semi-gloss SG-101 A4, LTR
SG-101 4x6 101.6 x 152.4 mm Photo Paper Plus Double Sided PP-101D PP-101D 5x7 Transparency CF-102 A4, LTR 127 x 178 mm A4, LTR
T-shirt transfer Envelope

TR-301 COM #10 DL-size

Ax 105 mm 220 x 110 mm
ASF, Cassette ASF / Cassette ASF / Cassette
1 sheet 10 / 5 envelopes 10 / 5 envelopes
*1: ASF only for LGL *2: When A4 or LTR is selected for Paper Size, plain paper is selectable for Paper Type. With plain paper selected for Paper Type, printing is done with borders even when borderless printing is selected.
To the table of contents <Part 3: 4. Print Media Specifications>

BY MAIL

REBATE
*Qualifying PIXMA models: iP6210D, iP6220D, iP6600D, MP170, MP450, MP500

Photo Printer

Buy a select new Canon Photo Printer or Photo All-In-One* and get $30 back by mail.
No additional purchase necessary!
With this mail-in claim form. Limited-time offer. Good in the fifty United States, the District of Columbia, and Puerto Rico. Purchase must be made between 2/1/06 and 3/31/06. See details and restrictions inside.
Terms of offer: To qualify for this $30 mail-in rebate offer, your envelope containing this rebate form, the original Secondary Proof of Purchase 12-digit UPC bar code cut from the inside flap of the new Canon PIXMA iP6210D, iP6220D, iP6600D, MP170, MP450 or MP500 Photo Printer or Photo All-In-One box, and a legible copy of your sales receipt with the printer or All-In-One purchase circled must be postmarked no later than May 1, 2006 and received no later than May 15, 2006. Purchase of an eligible new Canon Photo Printer or Photo All-In-One must be made between February 1, 2006 and March 31, 2006 to qualify. Photocopied UPC bar codes or bar codes other than the Secondary Proof of Purchase will not be accepted. All required information on the claim form must be hand printed; no mechanical reproductions or labels will be accepted. One claim form is required for each rebate requested. Keep copies of materials submitted; originals submitted become vendors property and will not be returned. Allow 60 days for delivery. Incomplete or illegible claim forms and claims that do not comply with the terms and conditions of this offer will be rejected and will not be returned. Vendor has the right to substantiate sales receipts. Dealers, distributors, and other resellers are not eligible for this offer. Offer good in the fifty United States, the District of Columbia, and Puerto Rico on products purchased from an authorized Canon dealer or dealers of its distributors in the fifty United States, the District of Columbia, and Puerto Rico only. Offer does not apply to purchases of refurbished or used products nor for a camera and printer packaged in one box and sold for one price. Rebate check will only be mailed to an address in the fifty United States, the District of Columbia, or Puerto Rico (no P.O. boxes). Void where prohibited, taxed, or restricted. Vendor is not responsible for lost, stolen, misdirected, or undelivered mail, nor for misprints or typographical errors. Cash value 1/100. K Please check this box if you do not want to receive information about other Canon products and promotions that may be of interest to you. For questions regarding this offer, call 1-888-864-6781 from 6:00 a.m. to 10:00 p.m., MT, Monday-Friday, excluding holidays. For a status on your rebate, visit http://canon.rebatestatus.com. 2006 Canon U.S.A., Inc. Canon is a registered trademark and PIXMA is a trademark of Canon Inc. in the United States and may also be registered trademarks or trademarks in other countries.

0058W803

New Canon PIXMA iP6210D, iP6220D or iP6600D Photo Printer, or MP170, MP450 or MP500 Photo All-In-One $30 Mail-In Rebate
I am eligible for the following $30 mail-in rebate (check one):
K K K K K K New PIXMA iP6210D Photo Printer New PIXMA iP6220D Photo Printer New PIXMA iP6600D Photo Printer New PIXMA MP170 Photo All-In-One New PIXMA MP450 Photo All-In-One New PIXMA MP500 Photo All-In-One

How this $30 offer works:
1. Purchase a new Canon PIXMA iP6210D, iP6220D or iP6600D Photo Printer or MP170, MP450 or MP500 Photo All-In-One between February 1, 2006 and March 31, 2006. 2. Completely fill out all of the information requested on this claim form. 3. Cut out the entire red Secondary Proof of Purchase 12-digit UPC bar code from the inside flap of the Canon Photo Printer or Photo All-In-One box (see sample on right*). 4. Attach a legible copy of your dated sales receipt showing the Canon PIXMA Photo Printer or Photo All-In-One purchased. Store name must appear legibly on the receipt. 5. Circle the date of purchase and the qualifying purchase on the receipt. 6. Make copies of all required documentation for your records. 7. Mail the completed rebate claim form, entire red Secondary Proof of Purchase 12-digit UPC bar code from the Canon Photo Printer or Photo All-In-One box, and a legible copy of your sales receipt to the address below:
*Sample Secondary Proof of Purchase 12-digit UPC bar code Secondary Proof of Purchase MP170 US

ITEM NUMBER

SAMPLE

0576B002

PROOF OF PURCHASE

Mail to: Dept. 70194

Canon PIXMA Printer Q106 $30 MIR P.O. Box 13199 Scottsdale, AZ 85267
Please provide the following information:
First Name Mailing Address (NO P.O. BOXES) City Daytime Phone Store Name State Zip Code E-mail Address MI Last Name