Thank you for purchasing the Canon PIXMA MP460. To prepare your machine for use, please follow these Easy Setup Instructions before referring to any other documentation.
Prepare the FINE Cartridges.
IMPORTANT Do not connect the USB cable until after the software is installed. See the reverse side of this sheet for details. Remove the protective tape. Do not touch!
Carefully remove all items from the box. Check the package contents.
See the flapped lid of the packing box.
Insert the FINE Cartridges.
Place the machine on a flat surface. Remove all shipping tape and the protective sheet. Open the Scanning Unit and remove the protective material (A).
(A) Be sure to hold the machine by the side. Do not lift the machine by grasping the Paper Support Extension or the Operation Panel.

Close the Scanning Unit.

Lift the Scanning Unit to put the Scanning Unit Support back to its original position. Wait until the preparatory operation is complete; this takes about one to two minutes.
Connect the power cord. Press [ON/OFF] to turn ON the machine.
Use [ ] or [ ] on the Operation Panel to select the language on the LCD, then press [OK].
Open the Paper Support (1) and pull up the Paper Support Extension (2) until it stops. Load the paper with the print side face up.
Ensure the paper stack does not exceed the Load Limit Mark (A).
Pinch and adjust the Paper Guide (3) to the width of the stack. Open the Paper Output Tray.
The language setting is only available for some countries. If you have an undesired language selection, refer to the Users Guide. (2)

(3) (A)

Lift the Scanning Unit and pull the Scanning Unit Support down into place.
The cartridge moves to the left. Install the FINE Cartridges here.
The hardware setup is complete.
If you are connecting the machine to a computer for use, see the reverse side for instructions on installing the software.
IMPORTANT (US only) Write down the serial number. You will need this to register the product.
2006 Canon Inc. All products and brand names are registered trademarks or trademarks of their respective owners. Specifications subject to change without notice.
QT5-0572-V01 xxxxxxx CANON INC. 2006 PRINTED IN VIETNAM
The following software programs are included on the Setup CD-ROM: Select Easy Install in order to install the application software, On-screen Manual and MP drivers. Select Custom Install in order to choose the options you would like to install. This sheet explains Easy Install only.
IMPORTANT Close any open software applications, including virus checkers, prior to installing the software. On-screen Manual Easy-PhotoPrint
MP Drivers ScanSoft OmniPage SE
MP Navigator ArcSoft PhotoStudio
This may not be available depending on the country of purchase.
IMPORTANT Do not connect the machine to Mac OS 9 or Mac OS X Classic environments since they are not supported.
The following software programs are included on the Setup CD-ROM:
On-screen Manual Easy-PhotoPrint ArcSoft PhotoStudio MP Drivers Easy-WebPrint My Printer* MP Navigator ScanSoft OmniPage SE
Step 1: Turn ON the machine, and connect the USB cable. Step 2: Prepare the Setup CD-ROM. 1 Turn ON your computer, and start Mac OS X. 2 Insert the Setup CD-ROM into the CD-ROM drive.
If the CD-ROM folder does not open automatically, double-click the CD-ROM icon on the desktop.
* This may not be available depending on the country of purchase. IMPORTANT Do not connect the USB cable until Step 4, Connect the USB cable. Before installing the software in Windows XP or Windows 2000, you must log on as Administrator or a user with Administrator privileges.
Double-click [Setup] on the Setup CD-ROM, or click [Setup] on the Setup CDROM and click [File] menu and then select [Open].
Step 1: Prepare the Setup CD-ROM and get ready to install. 1 Turn OFF the machine. 2 Turn ON your computer, and start Windows. 3 Insert the Setup CD-ROM into the CD-ROM drive.
The setup program should automatically run. If the setup program does not automatically run, click [My Computer], then double-click the CD-ROM icon. IMPORTANT If the following screen appears, the USB cable is connected.

Step 3: Enter the name and password for an Administrator Account. 1 Enter the name for the Administrator. 2 Enter the password and then click [OK].
Step 4: Select the language and place of residence.
In some countries, the [Select Language] and [Select Your Place of Residence] dialog boxes will not be displayed. Go to Step 5.
Perform the following steps.
1. Turn OFF the machine. 2. Disconnect the USB cable. 3. Click [Cancel]. Click
Select the language to use with this CD-ROM and then click [Next].
Select your place of residence and then click [Next].
Step 2: Select the language and place of residence.
In some countries, the [Select Language] and [Select Your Place of Residence] dialog boxes will not be displayed. Go to Step 3.
Step 5: Install the software. 1 Click [Easy Install], then click [Install].
To read descriptions of the software programs, set the mouse on the item.

Click Click Click

Step 3: Install the software.
Click [Easy Install], then click [Install].

Click [Yes].

Installation begins. Follow the displayed instructions.
Click [Restart] to restart your computer.
To install Adobe RGB (1998), click Custom Install and follow the instructions on the screen. Adobe RGB (1998) cannot be installed in Windows Me and Windows 98.
Read the License Agreement, then click [Yes].
Installation begins. Follow the displayed instructions. US only When the Registration window appears, follow the on-screen instructions to ensure product support. The serial number is located inside the machine. (See 3 Install the FINE Cartridge. on the reverse side of this sheet) * When connecting from Mac OS X v.10.3.3 or earlier: Restarting the computer while connected to the machine may cause the machine not to be detected. To resolve this, either unplug the USB cable then plug it back in again, or turn the machine OFF then back ON again.
Step 4: Connect the USB cable. 1 When the [Printer Connection] appears, connect the machine to the computer
with the USB cable. Turn ON the machine. Click [Exit].
If prompted to, restart your computer.
Perform the following to make sure the driver has been installed correctly.
1. Select [Applications] from the [Go] menu. Click 2. Double-click the [Printer Setup Utility] ([Print Center] when using Mac OS X v.10.2.8) icon. If the printer is displayed in the [Printer List], the printer driver is installed. If the printer is not displayed in the [Printer List], click [Add] in the [Printer List] and select [USB] from the pop-up menu. Select your machine from the [Product] list and click [Add].

US only When the Registration window appears, follow the on-screen instructions to ensure product support. The serial number is located inside the machine. (See Install the FINE Cartridge. on the reverse side of this sheet)
You can set the scan operation to start with the Operation Panel of the machine. For details, see the User's Guide. You now have completed installation of the software.

PIXMA MP460

Printers Attributes Printing Method Print Speed (up to) Color Bubble Jet Black: 22ppm (approx. 2.8 seconds per page)1 Color: 17ppm (approx. 3.6 seconds per page)1 Color Photo: 4" x 6" borderless photo: approx. 52 seconds1 Nozzle Text: Black: 320 Color 384 x 3 (CMY) Black: 600 x 600 dpi 2 Color: 4800 x 1200 dpi 2 Letter, Legal, Credit Card (2.13" x 3.39"), 4" x 6", 4" x 8", 5" x 7", 8" x 10", U.S. #10 Envelopes, Photo Stickers
Number of Nozzles Print Resolution (up to) Paper Sizes Copier Copy Speed
Up to 22 cpm black Up to 17 cpm color Color Document: approx. 53 secs. 4" x 6" borderless photo: approx. 57 secs.
Reductions 25% to 400% Enlargement Copy Feature Scanner Scanner Type Scanner Element Color Depth Max. Document Size Photo Card Interface IrDA 1.2 (JPEG Only)3 Direct Print Port Support Media Compatible Direct Print Photo Cards 4 : CIS 1200 x 2400 dpi (Optical) 19,200 x 19,200 dpi (Interpolated) 48-bit internal 8.5" x 11.7" Auto Magnification, AE (Auto Exposure), Borderless, Multiple Copy: 1-99, Fit-to-Page, Image Repeat
CompactFlash, SmartMedia, SD Card, Memory Stick, Memory Stick Duo, Memory Stick Pro, Memory Stick Pro Duo, MultiMediaCard (V3.31), Microdrive, xD-Picture Card and miniSD card
General Specifications Standard Interface Software Included USB 2.0 Hi-Speed5 Setup CD For Windows MP Driver, MP Navigator, Easy-PhotoPrint, Easy-WebPrint (Windows requires Microsoft Internet Explorer version. 5.5, version 6.0 recommended), ArcSoft PhotoStudio, ScanSoft OmniPage SE Setup CD For Macintosh OS X MP Driver, MP Navigator , Easy-PhotoPrint, ArcSoft PhotoStudio, ScanSoft OmniPage SE Warranty Toll-free telephone support. 1-Year Limited Warranty. Subject to certain terms and conditions. See www.canontechsupport.com for details.
PPM print speed based on the highest speed printer driver mode. Photo print speeds based on default mode driver setting using Canon Photo Paper Plus Glossy. Print speed will vary depending on system configuration, interface, software, document complexity, print mode, type of paper used and page coverage. Black text/color (CPM) is based on fast mode setting using Canon standard pattern on plain paper. Copy speed may vary based on document complexity, copy mode, page coverage, number of copies and type of paper used, etc. and does not take into account warming up time. Document copy speed is based on copying the manuscript "ISO/IEC FCD24712: Newsletter" using default settings on plain paper. 4" x 6" borderless photo copy is based on copying the photo "ISO/JIS-SCID N2" using default settings on 4" x 6" Photo Paper Plus Glossy. 2 Resolution may vary based on printer driver settings. Color ink droplets can be placed with a horizontal pitch of 1/4800 inch at a minimum. 3 JPEG files 3MB or smaller only. Requires mobile phone with IrDA port and support for IrMC version 1.1 protocol, with phone positioned no more than 7.9 inches from printer. 4 xD-Picture Card, Memory Stick Duo, Memory Stick PRO Duo, RS-MMC (V3.31) and mini SD Card requires an additional adapter which must be purchased separately. 5 USB 2.0 Hi-Speed performance requires Windows XP Service Pack 1, Windows 2000 Service Pack 4 or Mac OS X v 10.2.8 or later with pre-installed USB 2.0 port.

2006 Canon U.S.A., Inc. All rights reserved. Duplication in whole or in part without permission is prohibited. Privacy Statement :: Terms of Use
http://www.usa.canon.com/consumer/controller?act=ModelTechSpecsAct&fcategoryid=116&modelid=13369

Page 2 of 2