Troubleshoot to Harbour 2.0 Ethernet Installation
The following steps are to help for troubleshooting the Ethernet Installation after you installed successfully the driver of Harbour of 2.0:
A. Network Connection Setting
1) 2) 3) Press Start Then move cursor to My Network Places and RIGHT-HAND-CLICK Select and click Properties
Network Connections window then pops up showing all the Network Connection
DICOTA Accessories. Must have.
5) Check if there is a Network Connection - ASIX AX88XXX USB2.0 to Fast Ethernet Adapter, which indicates the Ethernet Adapter of Harbour 2.0
Note: If that network connection CANNOT be found, please go to B. Troubleshoot for Network Adapter Driver in next pages to install the driver properly. After that, you may have to come back to A. Network Connection Setting for correct connection setting.
Move the cursor to that ASIX AX88XXX USB2.0 Fast Ethernet Adapter icon, and RIGHTHAND-CLICK
Select and click Properties, the you may find the Properties Windows
8) Double-click Internet Protocol (TCP/IP)

9) 10) 11)

Select Obtain an IP address automatically Select Obtain DNS server address automatically Press OK to confirm the settings
B. Troubleshoot for Network Adapter Driver:
1) 2) 3) Press Start Then move cursor to My Computer and RIGHT-HAND-CLICK Select and click Properties
Select Hardware in System Properties Window Click Device Manager
6) Check if the drivers in Network adapters are correctly installed
The corresponding driver for Harbour 2.0 is ASIX AX88XXX USB2.0 to Fast Ethernet Adapter
If the driver was not properly installed, you may find a YELLOW ? in the front of ASIX AX88XXX USB2.0 to Fast Ethernet Adapter. You may require to Update Driver
DOWNLOAD the latest Network Adapter Driver from below website: http://www.dicota.com/start.php?productId=380&page=page_download_treiber&office=8 There are 2 different drivers up to now on the website driver Windows XP Ethernet AX88172 driver Windows XP Ethernet AX88772
Please select the appropriate driver according to ASIX AX88XXX USB2.0 Fast Ethernet Adapter which shows in Device Manager
8) RIGHT HAND CLICK ASIX AX88XXX USB2.0 Fast Ethernet Adapter and click Update Driver

Press Next

Complete the updating procedure according to Windows instruction, and press Finish

Harbour 2.0

USB 2.0 LAN Docking Station

Users Manual

Version 2.0

04/04/2005

1. INTRODUCTION... FEHLER! TEXTMARKE NICHT DEFINIERT. 1.1 FEATURES AND SPECIFICATIONS. 3 1.2 SYSTEM REQUIREMENTS.4 1.3 PACKAGE CONTENTS..4 1.4 CONNECTORS.4 1.5 AVAILABLE FUNCTIONS.5 1.6 LED INDICATOR.6 2. INSTALLING HARBOUR 2.0... 7 2.1 DRIVER INSTALLATION.7 2.1.1 Win98/98SE Driver Installation.7 2.1.2 WinME Driver Installation..17 2.1.3 Win2000 Driver Installation.20 2.1.4 WinXP Driver Installation.23 2.2 THINGS YOU NEED TO KNOW.25 2.3 SET UP THE PRINTER DEVICE.27 2.3.1 For Windows 98/SE/ME..27 2.3.2 For Windows 2000/XP.29 2.4 SET UP THE HYPERTERMINAL WITH USB TO SERIAL PORT.30 3. UNINSTALLING HARBOUR 2.0.... 32 3.1 REMOVE THE DEVICE.32 3.2 UNINSTALL THE DRIVER.32 3.2.1 For Windows 98/SE/ME..32 3.2.2 For Windows 2000/XP.33 4. APPLICATION NOTE.... 34
Harbour 2.0 Users Manual 2

1. Instruction

Thank you for ordering Harbour 2.0. Harbour 2.0 is an intelligent expansion module, which connects to a PC or notebook via Universal Serial Bus (USB) port, providing one high-speed RS-232 serial port, one printer port, one PS/2 keyboard & mouse, 3 downstream USB2.0 ports and one Ethernet access. Harbour 2.0 features easy connectivity for traditional serial devices, keyboards, mice and other USB devices and provides up to 480Mbps USB2.0 High Speed capability. Also can add one extra Ethernet port to your PC or notebook in seconds.
1.1 Features and Specifications
Add one high-speed serial port, one printer port, one PS/2 keyboard & mouse, 3 USB2.0 High Speed downstream ports and one Ethernet port to your PC or notebook in seconds. Improve the inconvenience of configuring old PC solutions like card extension solutions, which require adjusting IRQ or jumper settings and the incompatibility of various brands of docking solutions or bus repeaters. Avoid the hassle of removing your PC case, or rebooting the operating system during installation. Built-in 10/100Mbps Fast-Ethernet and IEEE802.3x flow control function for 100BASE-TX and 10BASE-T. Complies with USB specifications 2.0 (and under), with IEEE802.3u 100BASE-TX and with IEEE802.3 10BASE-T standards.

Product Information:

Basic Power Consumption: Bus-Power limit current protection: Output Voltage: Output Current: Physical PCB size (WxL): Operating Temperature: Stock temperature: Humidity: Unit Weight: Dimensions (LxWxH): Cable Length: 450mA 500mA 5V 1.8A (switching power adapter) 129x70mm 0 ~70C 0 ~85C 0%~80%RH 145g 91x135x34mm 6 feet
Harbour 2.0 Users Manual 3

1.2 System Requirements

1. 2. 3. 4. A PC with Pentium series, or equivalent. A minimum of 16M bytes of RAM. One available USB type A downstream port (UHCI, OHCI, or EHCI). Windows 98 or later.

1.3 Package Contents

The product you purchased should contain the equipment and accessories shown as follows: 1. A Harbour 2.0. 2. One 6 USB AB type cable. 3. One 2A switching power adapter. 4. One Harbour 2.0 driver and Users manual CD.
1.4 Connectors (Ref. Fig.1)

1. One DB-9 RS-232 serial interface connector supports baud rates from 2,400 to 115.2K. 2. One DB-25 parallel printer connector supports IEEE-1284 printer port. 3. One Mini-din for PS/2 keyboard, mouse. 4. Three USB receptacles type A downstream ports. 5. One USB type B upstream connector. 6. One RJ45 Ethernet connector.
Parallel Port Serial Port USB 2.0 Downstream RJ45 Ethernet USB Upstream

PS/2 Keyboard

Power Connector

PS/2 Mouse Fig.1

1.5 Available functions.
Harbour 2.0 Users Manual 4
The available functions of Harbour 2.0 depend on the status of power supplied: Bus powered 1. Connect the USB2.0 cable to your PC to provide bus power. 2. When you provide bus power only, the PS/2 mouse & keyboard, RS232, printer and Ethernet ports will be enabled. However, the USB2.0 Downstream Ports can also work under low power mode. So used of externally power adaptor is recommended. (For the use of all functions) Externally powered 1. Connect the power adapter to provide external power. 2. When you provide external power, the USB Downstream Ports can support all USB devices, and you can use all the functions of Harbour 2.0.
1.6 LED Indicator (Ref. Fig.2)
Harbour 2.0 Users Manual 5
Power Indicator The Power Indicator will turn RED when only bus power is supplied, will turn GREEN when external power is supplied. USB Indicators 1. There are three USB indicators. If the USB Downstream Ports are ready for use, the indicators will turn ON. 2. If over-current happens for certain USB Downstream Ports, the corresponding USB Indicator will turn OFF to indicate that this port is not working at the moment. 3. When over-current situation is resolved, the USB Indicator will turn ON again. LAN Indicators 1. Link/Act (Orange): This LED turns on if the 10/100Mbps (100BASE-TX) Ethernet is connected. 2. Transmission (Green): Blinking to indicate that the data is being received or transmitted through the RJ-45 port.
USB Indicators Power Indicator LAN Indicators
2. Installing Harbour 2.0
Harbour 2.0 Users Manual 6
1. This installation guide is written in accordance with different operation systems. Including Windows 98/98SE/ME, Windows 2000, and Windows XP. 2. Power on your computer and make sure that the USB port is enabled and working properly. 3. Connect the power adapter into Harbour 2.0. (For full functions) 4. Connect Harbour 2.0 to the USB port on your computer with the USB2.0 transfer cable provided. 5. Windows will start detecting USB devices. Please follow the related section to install your Harbour 2.0.

2.1 Driver Installation

2.1.1 Win98/98SE Driver Installation The driver installation is divided into A to F six-steps. Please install Harbour 2.0 under Win98/SE step by step by the following instructions: A. USB Hub Installation A1. Please insert the Windows 98 CD into your CD-ROM drive and press Next to continue. (Ref. Fig. Win98-A1)

Fig. Win98-A1

A2. Tick Search for the best driver for your device and press Next to continue. (Ref. Fig. Win98-A2)

Fig. Win98-A2

Harbour 2.0 Users Manual 7
A3. Tick CD-ROM drive and press Next to start the searching process. (Ref. Fig. Win98-A3)

Fig. Win98-A3

A4. Press Next to start the installation process. (Ref Fig. Win98-A4)

Fig. Win98-A4

A5. Press Finish to complete the installation of USB HUB. (Ref Fig. Win98-A5)

Fig. Win98-A5

B. IEEE-1284 Controller Installation
B1. Please insert the Harbour 2.0 CD into your CD-ROM drive and press Next to continue. (Ref. Fig. Win98-B1)
Fig. Win98-B1 Harbour 2.0 Users Manual 8
B2. Tick Search for the best driver for your device and press Next to continue. (Ref. Fig. Win98-B2).

Fig. Win98-B2

Fig. Win98-B3
B3. Tick Specify a location and click Browse to select the location of the driver folder in the Harbour 2.0 CD. Press Next to start the searching process. (Ref. Fig. Win98-B3).
B4. Press Next to start the installation process. (Ref. Fig. Win98-B4)

Fig. Win98-B4

Harbour 2.0 Users Manual 9
B5. Press Finish to complete the installation of USB-to-Parallel Port. (Ref. Fig. Win98-B5)

Fig. Win98-B5

C. USB-to-Serial Port Installation C1. Please insert the Harbour 2.0 CD into your CD-ROM drive and press Next to continue. (Ref. Fig. Win98-C1)

Fig. Win98-C1

C2. Tick Search for the best driver for your device and press Next to continue. (Ref. Fig. Win98-C2)

Fig. Win98-C2

Harbour 2.0 Users Manual 10

Fig. Win98-C3

C3. Tick Specify a location and click Browse to select the location of the driver folder in the Harbour 2.0 CD. Click Next to start the searching process. (Ref. Fig. Win98-C3)
C4. Press Next to start the installation process. (Ref. Fig. Win98-C4)

Fig. Win98-C4

C5. Press Finish to complete the installation of USB-to-Serial Port. (Ref. Fig. Win98-C5)

Fig. Win98-C5

Harbour 2.0 Users Manual 11
D. USB Composite Device Installation
D1. Please insert the Windows 98 CD into your CD-ROM drive and press Next to continue (Ref. Fig. Win98-D1)

Fig. Win98-D1

D2. Tick Search for the best driver for your device and press Next to continue. (Ref. Fig. Win98-D2)

Fig. Win98-D2

D3. Tick CD-ROM drive and press Next to start the searching process. (Ref. Fig. Win98-D3)

Fig. Win98-D3

Harbour 2.0 Users Manual 12
D4. Press Next to start the installation process. (Ref. Fig. Win98-D4)

Fig. Win98-D4

D5. Press Finish to complete the installation of Composite Device. (Ref. Fig. Win98-D5)

Fig. Win98-D5

E. Ethernet Port Installation E1. Please insert the Harbour 2.0 CD into your CD-ROM drive and press Next to continue. (Ref. Fig. Win98-E1)

Fig. Win98-E1

Harbour 2.0 Users Manual 13
E2. Tick Search for the best driver for your device and press Next to continue. (Ref. Fig. Win98-E2)

Fig. Win98-E2

Fig. Win98-E3
E3. Tick Specify a location and click Browse to select the location of the driver folder in the Harbour 2.0 CD. Press Next to start the searching process. (Ref. Fig. Win98-E3)
E4. Press Next to start the installation process. (Windows might ask you to insert the Windows 98 CD during the installation process). (Ref. Fig. Win98-E4)

Fig. Win98-E4

Harbour 2.0 Users Manual 14
E5. Press Finish to complete the installation of Ethernet Port. (Restart Windows might necessary). (Ref Fig. Win98-E5)

Fig. Win98-E5

F. USB HID Device for PS/2 keyboard & mouse Installation (This step might repeat once due to two different devices, mouse and keyboard)
F1. Please insert the Windows 98 CD into your CD-ROM drive and press Next to continue. (Ref. Fig. Win98-F1)

Fig. Win98-F1

F2. Tick Search for the best driver for your device and press Next to continue. (Ref. Fig. Win98-F2)

Fig. Win98-F2

Harbour 2.0 Users Manual 15
F3. Tick CD-ROM drive and press Next to start the searching process. (Ref. Fig. Win98-F3)

Fig. Win98-F3

F4. Press Next to start the installation process. (Ref. Fig. Win98-F4)

Fig. Win98-F4

F5. Press Finish to complete the installation of HID. (Ref. Fig. Win98-F5)

Fig. Win98-F5

Harbour 2.0 Users Manual 16

2.1.2 WinME Driver Installation The driver installation for WinME is divided into A to C three-steps. Please install Harbour 2.0 under WinME step by step by the following instructions: A. USB-to-Parallel Port Installation A1 Please insert the Harbour 2.0 CD into your CD-ROM drive. Tick Automatic search for a better driver and press Next to continue. (Ref. Fig. WinME-A1)

Fig. WinME-A1

A2. Press Finish to complete the installation USB-to-Parallel Port. (Ref. Fig. WinME-A2)

Fig. WinME-A2

B. USB-to-Serial Port Installation B1. Tick Automatic search for a better driver and press Next to continue. (Ref. Fig. WinME-B1)
Fig. WinME-B1 Harbour 2.0 Users Manual 17
B2. Press Finish to complete the installation of USB-to-Serial Port. (Ref. Fig. WinME-B2)

Fig. WinME-B2

C. Ethernet Port Installation C1. Tick Specify the location for a better driver and press Next to continue. (Ref. Fig. WinME-C1)

Fig. WinME-C1

Fig. WinME-C2
C2. Tick Search for the best driver for your device and then choose Specify a location. Click Browse to select the location of the driver folder in the Harbour 2.0 CD. Press Next to continue. (Ref. Fig. WinME-C2)
Harbour 2.0 Users Manual 18
C3. Press Next to start the installation process. (Ref. Fig. WinME-C3)

Fig. WinME-C3

C4. Press Finish to complete the installation of Ethernet Port. (Ref. Fig. WinME-C4)

Fig. WinME-C4

2.1.3 Win2000 Driver Installation The driver installation for Win2000 is divided into A, B two-steps. Please install Harbour 2.0 under Win2000 step by step by the following instructions: A. USB-to-Serial Port Installation A1. Please insert the Harbour 2.0 CD into your CD-ROM drive and press Next to continue. (Ref Fig. Win2k-A1)

Fig. Win2k-A1

Harbour 2.0 Users Manual 19
A2. Tick Search for a suitable driver for my device and press Next to continue. (Ref Fig. Win2k-A2)

Fig. Win2k-A2

A3. Please insert Harbour 2.0 CD into your CD-ROM drive and press Next to start the searching process. (Ref Fig. Win2k-A3)

Fig. Win2k-A3

A4. Press Next to start the installation process. (Ref Fig. Win2k-A4)

Fig. Win2k-A4

Harbour 2.0 Users Manual 20
A5. Press Finish to complete the installation of USB-to-Serial Port. (Ref Fig. Win2k-A5)

Fig. Win2k-A5

B. Ethernet Port Installation B1. Press Next to continue. (Ref Fig. Win2k-B1)

Fig. Win2k-B1

B2. Tick Search for a suitable driver for my device and press Next to continue. (Ref Fig. Win2k-B2)

Fig. Win2k-B2

Harbour 2.0 Users Manual 21
B3. Tick CD-ROM drives and press Next to start the searching process. (Ref Fig. Win2k-B3)

Fig. Win2k-B3

B4. Press Next to start the installation process. (Ref Fig. Win2k-B4)

Fig. Win2k-B4

Fig. Win2k-B5
B5. You will receive a message stating that the software you are installing has not passed Windows Logo testing. But this driver is fully compatible with Windows 2000, so just press Yes to continue. (Ref. Fig. Win2k-B5)
Harbour 2.0 Users Manual 22
B6. Press Finish to complete the installation of Ethernet port. (Ref. Win2k-B6)

Fig. Win2k-B6

2.1.4 WinXP Driver Installation Please install Harbour 2.0 under Win2000 step by step by the following instructions: A. Serial Port Installation A1. Please insert the Harbour 2.0 CD into your CD-ROM drive. Tick Install the software automatically and press Next to continue (Ref Fig. WinXP-A1)

Fig. WinXP-A1

Fig. WinXP-A2
A2. You will receive a message stating that the software you are installing has not passed Windows Logo testing. But this driver is fully compatible with Windows XP, so just press Continue Anyway to continue. (Ref. Fig. WinXP-A2)
Harbour 2.0 Users Manual 23
A3. Press Finish to complete the installation of USB-to-Serial Port. (Ref Fig. WinXP-A3)

Fig. WinXP-A3

B. Ethernet Port Installation
B1. Tick Install the software automatically and press Next to continue (Ref Fig. WinXP-B1)

Fig. WinXP-B1

B2. Press Finish to complete the installation of Ethernet Port. (Ref Fig. WinXP-B2)

Fig. WinXP-B2

Harbour 2.0 Users Manual 24
2.2 Things you need to know
Before connecting the printer to the parallel port of Harbour 2.0, the printer driver must be installed on your computer in advance, otherwise it might print unknown format of characters. Please refer to "Setting Up the Printer Device" section to connect your printer to the Harbour 2.0. For modem users, we advise you to install the modem driver manually before connecting the modem to the converter, otherwise it might operate unexpectedly. Please refer to "Setting Up the HyperTerminal with USB to serial port" section as an example of routing your COM port setting.

Harbour 2.0 Users Manual 25
Congratulations!! You have finished installing Harbour 2.0.
Please click on Start, Settings, Control Panel, double-click System, and Device Manager. Please double check Human Interface Devices, Keyboard, Mouse, Network adapters, Ports, and Universal serial bus controller on the dialog box and see if they are working properly. (Ref. Fig.3, 4)

Keyboard Mouse

Ethernet

USB to Serial

USB to Parallel
Harbour 2.0 Users Manual 26
2.3 Set Up the Printer Device
Follow the steps below to connect your printer to the Harbour 2.0 with your PC: 2.3.1 For Windows 98/98SE/ME: 1. Connect the Harbour 2.0 to your printer with the parallel cable and then turn on the printer. 2. Connect the Harbour 2.0 to the USB port on your computer with the USB2.0 transfer cable provided. 3. Please go to Start, Settings, Control Panel, double click System, and Device Manager. Check Ports on the dialog box and see which printer ports the USB-to-Parallel Port is located. The following example is located as LPT2. (Ref. Fig.5)
4. If you have installed a printer device before, go to Start, Settings, and Printers. Right-click the default-installed printer and choose Properties. The Properties dialog box of the installed printer will appear on your screen.
Harbour 2.0 Users Manual 27
5. Click Details folder tab and change the printer port to LPT2: USB-to- Parallel Port. (Ref. Fig.6)
6. If you do not have a printer installed yet, go to Start, Settings, Printers, and choose Add Printer. The Add Printer Wizard will start and assist you to install a new printer device. Select the printer manufacturer and model name from the list provided by the wizard or use the printer driver diskette came with your printer. 7. Windows will ask you which port the printer will be used, choose LPT2: USB to Parallel Port. (Ref. Fig.7)
Follow the instructions to complete the installation. Run Print Test Page to see if the printer is working without any problem.
Harbour 2.0 Users Manual 28
2.3.2 For Windows 2000/XP: 1. Connect the Harbour 2.0 to your printer with the parallel cable and then turn on the printer. 2. Connect the Harbour 2.0 to the USB port on your computer with the USB2.0 transfer cable provided. 3. If you have installed a printer device before, go to Start, Settings, and Printers. Right-click the default-installed printer and choose Properties. The Properties dialog box of the installed printer will appear on your screen. 4. Click Ports folder tab and change the printer port to USB001: (Virtual printer port for USB). (Ref. Fig.8)
5. If you do not have a printer installed yet, click on Start, Settings, Printers and choose Add Printer. The Add Printer Wizard will start and assist you to install a new printer device. Select the printer manufacturer and model name from the list provided by the wizard or use the printer driver diskette came with your printer.

Harbour 2.0 Users Manual 29
6. Windows will ask you which port the printer will be used, choose USB001: (Virtual printer port to USB). (Ref. Fig.9)
2.4 Set up the HyperTerminal with USB to serial port
1. Make sure that HyperTerminal is installed in your system. If not, please go to Start, Settings, and Control Panel. Double click Add/Remove Programs, choose Windows Setup page, Communications, click Details button and enable HyperTerminal to install the program to your Windows system. 2. Go to Start, Settings, Control Panel, double click System, and click on Device Manager. Check which COM port is located by USB to serial port. (Ref. Fig.10)

Fig.10

Harbour 2.0 Users Manual 30
3. If you have setup HyperTerminal before, please go to Start, Programs, Accessories, Communications, HyperTerminal. Click File and choose Properties. The Properties dialog page will appear on your screen. If it is your first time to setup HyperTerminal, you will see the following page during the setup procedure. (Ref. Fig.11)

Fig.11

4. Click the Connect using item to indicate the proper COM port, which appeared in step 1. Follow the instructions to complete the setup.
Harbour 2.0 Users Manual 31
3. Uninstalling Harbour 2.0
If you want to remove Harbour 2.0 and its driver, you can uninstall it by the following steps:

3.1 Remove the device

1. Please Unplug the USB cable.

3.2 Uninstall the driver

1. For the Windows 2000/XP users: since the system has built in the USB Printer Class driver already, so you do not need to remove the printer driver. 2. For the Windows 98/SE/ME users: you have to follow the instruction to remove the Serial, Printer driver. 3.2.1 For Windows 98/SE/ME ( Remove Printer, Serial Drivers ): 1. Run Uninst.exe from the driver folder in Harbour 2.0 CD. 2. Please Press OK to remove Printer Converter. (Ref. Fig.13)

Fig.13

3. Printer Converter had been removed. Please press Exit to continue. (Ref. Fig.14)

Fig.14

4. Run DRemover98_2k.exe from the driver folder in Harbour 2.0 CD.
Harbour 2.0 Users Manual 32
5. Please Press OK to remove Serial Converter. (Ref. Fig.15)

Fig.15

7. Press Yes to reboot your Windows system to complete. (Ref. Fig.16)

Fig.16

3.2.2 For Windows 2000/XP ( Remove Serial Driver ):
1. Run DRemover98_2k.exe from the driver folder in Harbour 2.0 CD.
2. Please Press OK to remove Serial Converter. (Ref. Fig.17)

Fig.17

3. Press Yes to reboot your Windows system to complete. (Ref. Fig.18)
Harbour 2.0 Users Manual 33

Fig.18

4. APPLICATION NOTE
1. Harbour 2.0 normally derives its own power from PC Host. When only the Host power is supplied, the Power LED will turn RED, and the serial, parallel, keyboard, mouse, Ethernet and 3 downstream ports can operate without the external power adapter. 2. Please note that if the external power adaptor is not be used and heavy power consumption USB device is connected, the 3 downstream ports may not function normally. Therefore the used of external power adaptor is highly recommend. You may use the external power by connecting an external 5 voltage, 2A DC power that is UL, CE, T-mark or locally approved. For Polarity, see the following:

3. Unknown Device:

If the installation process is completed and some of the devices still don't work, please click on Start, Settings, Control Panel, double-click System, and Device Manager. Check Human Interface Devices, Keyboard, Mouse, Network adapters, Ports, and Universal serial bus controller on the dialog box and see if Unknown device appears on the screen. You need to right-click the Unknown device and choose Remove to remove it. Then choose Refresh to re-detect the device. (You might need to install the device driver once again so please follow the same installation procedures as section 2.1). After trying the above procedures and your device still cannot work, please contact the technical support at your local distributor.
Harbour 2.0 Users Manual 34
4. Service and Answers Installed the driver for USB Port Replicator under Windows XP operation system, there is no Printer Port available in the device manager , but the other Ports ( Serial ,Mouse, Keyboard and USB) are OK. The driver for USB to Printer converter on Windows 2000 and XP is not required. Microsoft supports USB Printer class in both OS. The related driver will be loaded Automatically by Microsoft when you plug in the USB to Printer device. It will be created a message printer support device in the device manager and also a virtual printer port for USB in the port selection of printer setting. You may just check this item and it will work on both system. This is different for Windows 98 and ME. There wont be any LPT port generated by system as like in 98/ME. Please also refer to the users manual Set up the Printer Device >> for Windows 2000 and XP.

2 year warranty. If you encounter any problem with your Harbour 2.0, please contact our local dealer. You can find a list of all dealers on this CD.
Harbour 2.0 Users Manual 35

Disclaimer

Information in this document is subject to change without notice. The manufacturer does not make any representations or warranties (implied or otherwise) regarding the accuracy and completeness of this document and shall in no event be liable for any loss of profit or any other commercial damage, including but not limited to special, incidental, consequential, or other damages. No part of this document may be reproduced or transmitted in any form by any means, electronic or mechanical, including photocopying, recording or information recording and retrieval systems without the express written permission of the manufacturer. All brand names and product names used in this document are trademarks, or registered trademarks of their respective holders.

FCC Statement

This device generates and uses radio frequency and may cause interference to radio and television reception if not installed and used properly. This has been tested and found to comply with the limits of a Class B computing device in accordance with the specifications in Part 15 of the FCC Rules. These specifications are designed to provide reasonable protection against such interference in a residential installation. However, there is no guarantee that interference will not occur in a particular installation. If this device does cause harmful interference to radio or television reception, which can be determined by plugging the device in and out, the user can try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the device and receiver. Connect the computer into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help.
Harbour 2.0 Users Manual 36