Epson AcuLaser CX11N/CX11NF
Note: The CX11N instructions also apply to the CX11NF unless otherwise indicated. Paper stopper (CX11NF only) The illustrations in this guide show the Epson AcuLaser CX11NF, but the instructions are the same as the CX11N unless otherwise indicated.

AcuLaser CX11N Parts

Auto Document Feeder (CX11NF only)

Cover (CX11NF only)

Accessories

Toner Cartridges

Cover C Cover B Output tray Extension tray Control panel Option cover Power switch Telephone interface connectors (CX11NF only) Cover A MP tray
Cartridge High Capacity Toner Cartridge (Yellow) High Capacity Toner Cartridge (Magenta) High Capacity Toner Cartridge (Cyan) High Capacity Toner Cartridge (Black) Standard Capacity Toner Cartridge (Yellow) Standard Capacity Toner Cartridge (Magenta) Standard Capacity Toner Cartridge (Cyan) Part number S050187 S050188 S050189 S050190 S050191 S050192 S050193

User Replacable Parts

Part Photoconductor Fuser Power cord Part number S2093853

Cover F

USB connector

Handle

Cover E

AC inlet

Network interface connector Photoconductor
You can purchase genuine Epson toner and paper from an authorized Epson reseller. To find the nearest reseller, please call 800-GO-EPSON (800-463-7766). To purchase online, visit www.epsonstore.com (U.S. sales only). In Canada, please call (800) 463-7766 for reseller referral.

Specifications

Fuser Photoconductor access lever Cleaning knob access lever

General

Printing method Resolution Laser beam scanning and dry electrophotographic process 600 dpi base 2400 RIT (with enhancement)
Continuous printing speed1 (on Letter/A4)

Paper guides (MP tray)

25 pages per minute for black-and-white printingpages per minute for color printing3

Toner cartridge

Epson AcuLaser CX11N/CX11NF - 1
First print speed1 9.0 seconds for black-and-white printing on A4 or Letter size paper 17.0 seconds for color printing on A4 or Letter size paper About 37.0 seconds at normal temperature Automatic or manual feed Center alignment for all sizes Up to 180 sheets of plain paper (80 g/m) Up to 20 envelopes Up to 75 sheets of transparencies Up to 75 sheets of labels Up to 250 sheets of plain paper (80 g/m) Protocol Transmission and reception mode Color Monochrome Image compression method Color Monochrome JPEG MH, MR, MMR Transmits and receives 8 bits each for RGB Transmits and receives 1 bit monochrome

Faxing (CX11NF Only)

Supported communications lines Communication speed
Warm-up time2 Paper feed Paper feed alignment MP tray
PSTN (subscriber lines) PBX (independent premises internal lines) 33600, 31200, 28800, 26400, 24000, 21600, 19200, 16800, 14400, 12000, 9600, 7200, 4800, 2400 bps G3, G3ECM

Paper output capacity

RAM (proprietary) 128 MB, expandable up to 576 MB
1 Printing speed varies by paper source or other conditions. 2 Warm-up time varies with optional configurations. 3 The product may automatically calibrate during printing to improve printing quality. This may reduce the printing speed to below that of the value described. Also, depending on paper size, the product may stop momentarily to protect the fuser unit.

Transmission and reception of scanning line density Color dpi 8 15.4, 8 7.7, 8 3.85 dot/mm A4, Letter, Legal (with ADF) A4, B5, Letter, Legal (with ADF) Monochrome Document size Print paper size

Scanning

Scanner type Effective area Effective pixels Document size Image data Scanning speed Flatbed color image scanner 8.3 11.7 in. (mm) pixels at 600 dpi A4, Letter 16 bits per pixel per color internal 1 to 8 bits per pixel per color external Black and white: 2 sec/A4 (300 dpi) Full color: 11 sec/A4 (300 dpi) Photoelectric device 4-lines CCD (R, G, B, B/W)

Mechanical

Paper path MP tray capacity Dimensions CX11NF Width: 18.1 inches (460 mm) Depth: 18.4 inches (467 mm) Height: 26.1 inches (667 mm) Width: 18.1 inches (460 mm) Depth: 18.4 inches (467 mm) Height: 23.4 inches (593 mm) Approx. 73 lb (33.1 kg), excluding the imaging cartridge and photoconductor uni Approx. 68.1 lb (30.9 kg), excluding the imaging cartridge and photoconductor unit Sheet feeder, front entry, top out 180 sheets of 24 lb (90 g/m2) paper

Copying

Black and white copy mode A4/ 300 dpi First copy Multi-copy 12 sec 25 ppm Weight CX11NF CX11N CX11N
Continuous copy (Fax model only): 25 ppm Color copy mode A4/ 300 dpi First copy Multi-copy 29 sec 5 ppm
Continuous copy (Fax modely only): 5 ppm
2 - Epson AcuLaser CX11N/CX11NF

Interfaces

USB Interface
Colors Based on Universal Serial Bus Specifications Revision 1.1, Universal Serial Bus Device Class Definition for Printing Devices Version 1.Mbps (Full speed device) NRZI USB Series B 2.0 Under 2 meters Cartridge life Black Yellow Magenta Cyan Standard Capacity1: 1,500 pages, High Capacity: 4,000 pages Standard Capacity: 1,500 pages, High Capacity: 4,000 pages Standard Capacity: 1,500 pages, High Capacity: 4,000 pages Standard Capacity: 1,500 pages, High Capacity: 4,000 pages Cyan, magenta, yellow, black

Standard

Bit rate Data encoding Adaptable connector Recommended cable length
1 Standard black included with the product.

Electrical

Rated voltage Rated frequency range Rated current 120 V 50 to 60 Hz 7.5 A
Temperature Storage Humidity Storage 15 to 80% RH (unopened) 32 to 95F (0 to 35C)
Power consumption Approx. 189 W (color printing), 287 W (black and white) Approx. 58 W in standby mode Approx. 15 W in sleep mode

Caution: To ensure good results, use genuine Epson toner cartridges and do not refill them. Other products may cause damage to the printer not covered by Epsons warranty. Do not use a toner cartridge if the date on the package has expired.

Photoconductor Unit

Temperature Storage 32 to 95F (0 to 35C) 15 to 80% RH 14,000 pages under conditions of 5% printing ratio, color and black have a proportion of two to one per page, and two pages per job. 42,000 pages of continuous printing, under conditions of 5% printing ratio and blackand-white printing. 20,900 pages under conditions of 5% printing ratio, black-and-white printing, and one page per job. 10,500 pages of continuous printing, under conditions of 5% printing ratio and color printing. 10,500 pages under conditions of 5% printing ratio, color printing, and one page per job. Humidity Storage Unit life

Environmental

Temperature Operation Storage 50 to 89.6 F (10 to 32 C) 32 to 95 F (0 to 35C) 4 to 104 F (20 to 40C) for 120 hours or less 15 to 80% RH 10 to 15%, 80 to 90% RH
Humidity (without condensation) Operation Storage

Safety Approvals

Safety standards EMC EMI EU-96 UL 60950, CSA C22.2 No. 60950-00 FCC part 15 subpart B class B CSA C108.8 Class B FCC part 68
Memory Modules (Proprietary)
Memory size Standard memory: 128 MB Expansion memory: up to 576 MB
Epson AcuLaser CX11N/CX11NF - 3

Single sheets

Using the MP Tray
1. Open the MP tray cover. A4 (8.3 11.7 inches) A5 (5.8 8.3 inches) A6 (4.1 5.8 inches) Letter (8.inches) Legal (8.inches) Half-letter (5.5 8.5 inches) Executive (7.3 10.5 inches) User Defined up to 8.inches Plain bond paper or special paper distributed by Epson 0.003 to 0.004 inch (0.08 to 0.11 mm) 17 lb (64 g/m) to 24 lb (90 g/m) (for plain bond paper)

MP tray cover

2. Pinch the knob and paper guide together, then slide the right paper guide outward.
Paper type Thickness Weight

Envelopes

No. 10 (4.1 9.5 inches) DL (4.3 8.7 inches) C6 (4.5 6.4 inches) MON C5 IB5 Plain bond paper 20 lb (75 g/m) to 24 lb (90 g/m)
3. Load a stack of paper in the center of the tray with the short edge first and the printable surface facing up. Pinch the knob and the paper guide together and slide them against the right side of the stack for a snug fit.

Capacity Up to 180 sheets (Total stack thickness: 0.8 in.)

Selecting a Paper Source

You can specify a paper source manually or set up automatic paper source detection. To manually select a paper source for Windows, access the printer driver, click the Basic Settings tab, and select the paper source that you want to use from the Paper Source list. Then click OK. To manually select a paper source for Macintosh, access the printer driver, select Printer Settings from the drop-down list, and click the Basic Settings tab. Then select the paper source that you want to use from the Paper Source list and click OK. To set up automatic paper source detect, select Auto Selection from the Paper Source list as described above. The product will search for a paper source containing the specified paper size in the MP tray. If the optional 500Sheet Paper Cassette Unit is installed, then it will also search its cassette.
Note: If you select paper size or paper source settings in your application, these settings may override the printer driver settings.

Semi-thick paper

Total stack thickness: 0.8 in.
Up to 20 sheets (Total stack thickness: 0.8 in.) Up to 75 sheets Total stack thickness: 0.8 in.

Labels Thick paper

Extra thick paper Coated paper
Total stack thickness: 0.8 in. Total stack thickness: 0.8 in.

Selecting a Paper Tray

Before you load paper you need to select a paper tray based on whether youre printing or copying and the size of paper your printing or copying onto.
Epson AcuLaser CX11N/CX11NF - 5

Paper Cassette Unit

The optional Paper Cassette Unit can hold the following types and sizes of paper.
Paper Type Plain paper Paper Size A4, Letter (LT) Capacity Up to 500 sheets in a cassette Total stack thickness: 2.2 in.
Placing Large or Thick Originals (CX11N Only)
When you scan large or thick originals, you can remove the document cover. Just open it and pull it straight up.
Placing Originals for Copying and Scanning
You can place originals on either the document table or the Auto Document Feeder (CX11NF only), depending on the type of the original.
Note: If you place originals on both the Auto Document Feeder and the document table, only the documents in the Auto Document Feeder are scanned.
If you need to press the document flat while you copy or scan it, do not press too hard and be careful not to move it.
Caution: Do not use excessive force on the document cover, and do not twist it diagonally. You may damage the document cover.
Placing Originals on the Document Table
Before scanning or copying, make sure the transportation lock on the left side of the document table is set to the unlock position. Always keep the document table clean. 1. Open the document cover and place your original facedown on the glass as shown, in the upper left corner. Move your original about 0.06 in. (1.5 mm) away from the top and left edges so all of it will be scanned.

When you are done, replace the document cover by inserting the tabs back into the slots.
Placing Originals in the Auto Document Feeder (CX11NF Only)
The ADF can hold the following types and sizes of paper.
Paper Type Plain paper, Recycled paper Paper Size B5, A4, Letter (LT), Legal (LGL) Capacity Up to 50 sheets (Total stack thickness: 0.4 in.)
1. Slide the edge guides all the way outward. 2. Arrange your originals so the page you want scanned or copied first is on the top of the stack.
Note: Pages are fed from the top and ejected face-down.
If you plan to scan multiple photographs, position each one at least 0.8 in. apart from the others.
Note: The area with a width of maximum 0.06 in. from the horizontal edge and 0.06 in. from the vertical edge is not scanned. Caution: Do not place heavy objects on the document table or press the glass surface with too much force.
3. Insert up to 50 originals short edge first and face-up in the Auto Document Feeder until it meets resistance. Slide the edge guides inward against the edges of your originals.
2. Close the document cover gently so that your original does not move.
Note: Do not leave photographs on the document table for an extended period of time as they may stick to the glass.
6 - Epson AcuLaser CX11N/CX11NF
Home Mode is best when you want to preview images of photos before scanning them. You can size the image as you scan, adjust the scan area, and adjust many image settings, including color restoration. Office Mode lets you quickly scan multi-page documents of the same size using the Auto Document Feeder. Office Mode is available only with the CX11NF. Professional Mode gives you total control of your scanning settings and lets you check their effects with a preview image. Professional Mode is best when you want to preview your image and make extensive, detailed corrections to it before scanning. You can sharpen, color correct, and enhance your image with a full array of tools, including color restoration.
Follow these steps to make a basic copy: 1. Make sure the product is turned on and paper is loaded. For instructions on loading paper, see page 4. 2. Place your original on the document table or in the Auto Document Feeder (CX11NF only). For instructions, see page 6. 3. Press the
Copy button on the control panel.
The Copy light turns on. The LCD panel displays Copy Mode for a few seconds, then changes to the copy mode screen.
Starting EPSON Scan as a Standalone Program
If you just want to save scanned images without editing them, start EPSON Scan directly. Scanned images are automatically saved as files in your system. 1. Do one of the following to start EPSON Scan: 4. Specify your copy settings as necessary. 5. Press the x B&W Start (to make a black-and-white copy) or x Color Start button (to make a color copy). Windows: Double-click the EPSON Scan icon on your desktop. Or select Start > All Programs or Programs > EPSON Scan > EPSON Scan. Mac OS X: Open the Applications folder and click the EPSON Scan icon. The EPSON Scan window appears:

You can use your CX11N to scan a photo or document and save it on your computer or fax it to someone else. If you want to scan an image and save it directly to a file, you can start EPSON Scan as a standalone program. You can also scan using the control panel (Push Scan). For details, see page 8. You can also access EPSON Scan from any application that supports the TWAIN standard. When you are finished, the scanned image opens in your scanning program so you can modify, print, and save it. For details, see page 8.
Note: In this section, the operation of EPSON Scan is explained using Windows examples.

Change scan mode here

EPSON Scan offers three scanning modes that let you control all aspects of scanning: Home Mode lets you customize scanning settings and check their effects with a preview image. 2. The default mode when you first start Epson Scan is Home Mode. If you want to change to Office or Professional Mode, select the mode from the Mode menu. The EPSON Scan window changes.
Epson AcuLaser CX11N/CX11NF - 7
Starting EPSON Scan With Another Scanning Application
1. Start your scanning program. Double-click the program icon from your desktop, if it is available, or do one of the following: Windows: Select Start > All Programs or Programs > program folder > program icon. Mac OS X: Open the Applications folder, select the program folder, and click the program icon. 2. Select your programs scanning option. (See your scanning program help for instructions.)
Note: In some programs, you must select the Epson AL-CX11 as the source first. If you see a Select Source option, choose it and select your Epson AL-CX11 there first.

Scan modes Manual scan

Available settings File Format Paper Size
Items PDF, TIFF, JPG A4, B5, Letter, Legal
Follow these steps to scan: 1. Connect the CX11N to your computer with a USB cable or a network cable as described in your Setup Guide. 2. Turn on the CX11N. Place your originals on the document table (see page 6) or in the Auto Document Feeder (CX11NF only; see page 6).
Caution: Make sure the transportation lock on the left side of the document table is set in the unlock position.

3. Press the

Scan button.
4. Press the u or d button to select either Local PC or Network PC, then press the r button. When you select Local PC, you see a message on your computer screen. Select your scanning program, scan your document, and close your scanning program. The CX11N returns to the Print mode. When you select Network PC, the network computer name appears in the LCD screen. Press the u or d button to select your network computer, and then press the r button. 5. Press the l or r button to select a file format. 6. Press the x B&W Start or x Color Start button on the control panel. EPSON Scan starts scanning. When the scanning is complete, remove your originals from the document table or the Auto Document Feeder. If you need to cancel scanning, press the y Cancel button.

Note: When the recipients fax machine supports only black-and-white fax, a color fax is received as a black-and-white fax even if you press the x Color Start button.
2. Press the d button twice to select Fax Settings, then press the r button. 3. Press the d button twice to select Reception Settings, then press the r button. 4. Press the d button twice to select Incoming Mode, then press the r button. The Reception Settings menu appears.
5. Press the u or d button to select the reception mode you want, then press the r button. 6. To exit the settings, press the l button several times or press one of the mode buttons.

Receiving a Fax

There are four modes for receiving faxes. The default setting is Fax only.
Item Auto switching Description The call is received by the attached phone and the CX11NF automatically answers after the phone rings for a certain duration specified by the Attached Phone Timeout setting. The CX11NF automatically answers and receives the fax. The call is received by the attached phone. Fax reception is not performed. When an attached phone detects a fax/phone signal while answering an incoming call, the CX11NF automatically receives the fax.
Checking Toner and Photoconductor Levels
Epson Status Monitor 3 lets you monitor printing and displays information about your paper and toner status.

Windows

Note: Windows XP users Shared Windows XP LPR connections and shared Windows XP Standard TCP/IP connections with Windows clients do not support the Job Management function. EPSON Status Monitor 3 is not available when printing from a Remote Desktop connection.

Fax only Phone only TAM

To change Incoming Mode settings, follow these steps. 1. Press the

Setup button.

Epson AcuLaser CX11N/CX11NF - 9
1. Open the File menu and select Print. 2. Click the Optional Settings tab.

Macintosh

1. Open the File menu and select Print. 2. Select Printer Settings from the pop-up menu, then select the Utility tab.

Click your printers icon

3. Click EPSON Status Monitor 3. You see a window like this: 3. Click your printers icon. You see a window like this:

You can monitor printer status and see information on toner levels, paper levels, and the remaining life of the photoconductor.
Note: This screen may vary depending on your operating system version.
10 - Epson AcuLaser CX11N/CX11NF

Handling Precautions

Always follow these precautions when replacing a toner cartridge: Install a genuine Epson toner cartridge. Using a non-Epson toner cartridge may affect print quality. Other products may cause damage to your printer not covered by Epsons warranty. When handling toner cartridges, always place them on a clean smooth surface. If you move a toner cartridge from a cool to a warm environment, wait for at least one hour before installing it to prevent damage from condensation.
Warning: Do not touch the toner and keep it away from your eyes. If toner gets on your skin or clothes, wash it off with soap and water immediately. Keep toner cartridges out of the reach of children. Do not dispose of toner cartridges in fire, as they may explode and cause injury. Dispose of them according to local regulations. If toner spills, use a broom and dustpan or a damp cloth with soap and water to clean it up. Because the fine particles can cause a fire or explosion if they come into contact with a spark, do not use a vacuum cleaner.
Consumable Replacement Messages
When you see the following messages in the LCD screen or in the EPSON Status Monitor 3 window, you need to replace the indicated unit. You can continue printing for a short time after a message appears, but Epson recommends replacement to maintain print quality and extend the life of your product.
LCD screen message Worn Photoconductor Description The photoconductor is near the end of its service life. Replace the photoconductor with a new one. The fuser has reached the end of its service life. The developer has reached the end of its service life.
Worn Fuser Worn uuuu Dev Unit
Note: To clear the message, press the Setup button on the control panel, select Reset from Printer settings, then select Clear All Warnings. The CX11N stops printing if the worn consumable might damage the CX11N. You must replace the consumable product to continue.
If a consumable product reaches the end of its service life, the product stops printing and displays the following messages on the LCD screen or in the EPSON Status Monitor 3 window.
LCD screen message Replace Toner uuuu1 Replace Photocondctr2 Description The indicated toner cartridge is empty. The photoconductor is at the end of its service life.

Changing a Low Toner Cartridge
1. Make sure the CX11N is turned on, then press the Setup button. The Setup light turns on and the LCD screen displays
Setup Mode for a few seconds, then changes to the Setup
1 The letters C, M, Y, and K appear in this position, indicating the color of the empty toner cartridge. 2 Even if this message is displayed in the LCD screen, you can continue to print for a short time by pressing the x B&W Start or x Color Start button on the control panel. The message in the LCD screen changes from Replace Photocondctr to Worn Photoconductor.
menu screen. 2. Use the u or d button to select Printer Settings, then press the r button. 3. Use the u or d button to select Reset Menu, then press the r button. 4. Use the u or d button to select Change Toner C/M/Y/K for the color of the toner cartridge you want to change, then press the r button. 5. Continue with the steps in the next section to remove and replace the toner cartridge.
Messages appear for one consumable product at a time. After replacing a part, check the LCD screen for replacement messages for other parts.
Replacing a Toner Cartridge
When a toner cartridge is empty, a message appears on the LCD screen indicating which toner cartridge needs to be replaced. If you are going to print a large document or make a large number of copies and one of the toner cartridges is low, you can change that cartridge so you wont run out of toner in the middle of the job. See: Changing a Low Toner Cartridge (next column) Removing and Replacing a Toner Cartridge on page 12
Epson AcuLaser CX11N/CX11NF - 11
Removing and Replacing a Toner Cartridge
1. Make sure the CX11N is turned on. 2. Check the color of the low or empty toner cartridge in the LCD screen, then open cover A.
Warning: Do not touch the toner. Keep the toner away from your eyes. If toner gets on your skin or clothes, wash it off with soap and water immediately.
6. Hold the tag and gently pull the toner seal upward and remove it.

7. Insert the toner cartridge with the arrow mark facing you. Push it all the way into its slot, pushing on both sides evenly, until it stops securely.
3. Push up the lock lever on the right to unlock the toner cartridge.
8. Push down the right lever to lock the toner cartridge.
4. Pull out the toner cartridge.
Note: The toner cartridge is installed securely when the lock lever is at the lock position.
9. Close cover A. 5. Remove the new toner cartridge from its package and gently shake it as shown below. 10. Check for toner messages on the LCD screen. If another toner cartridge needs to be replaced, you see another error message. Repeat steps 2 to 9 to replace the other cartridges.
12 - Epson AcuLaser CX11N/CX11NF

5. Lift up cover B.

Replacing the Photoconductor
Always follow these precautions when replacing the photoconductor: The photoconductor weighs 6.16 lb (2.8 kg). Be sure to hold it firmly by the handle when carrying it. Avoid exposing the photoconductor to light any longer than necessary. Be careful not to scratch the surface of the drum and belt. Also, avoid touching the drum; oil from your skin may permanently damage its surface and affect print quality. Do not store the photoconductor in an area subject to direct sunlight, dust, salty air, or corrosive gases (such as ammonia). Avoid locations subject to extreme or rapid changes in temperature or humidity. Do not tilt the photoconductor.
Warning: Keep the photoconductor out of the reach of children. Do not dispose of a used photoconductor in fire, as it may explode and cause injury. Dispose of it according to local regulations.
6. Pull up the orange lever inside cover B.
Removing and Replacing the Photoconductor
1. Make sure the CX11N is turned on. 2. Remove any paper loaded in the ADF (CX11NF only). 3. Slowly flip back the scanner until it stops. 7. Lift out the photoconductor using its handle.
4. Close the output tray extension. 8. Remove the new photoconductor from its package and pull off the protective sheet.
Epson AcuLaser CX11N/CX11NF - 13
Caution: Do not touch the belt on the top of the photoconductor or the blue area; otherwise, print quality may decrease. Avoid exposing the photoconductor to light any longer than necessary. Do not touch any other components inside the CX11N.
12. Slowly push down the scanner to its original position.

Cleaning the CX11N

If the CX11Ns outer case is dirty or dusty, turn off the CX11N and clean it with a soft cloth moistened with mild detergent.
Caution: Never use alcohol or paint thinner to clean the CX11N; these chemicals can damage the components and the case. Be careful not to get water on the CX11N mechanisms or any electrical components.

9. Hold the photoconductor by its handle and insert it into the slots marked with blue arrows inside the CX11N. Push it in until it clicks into place.
To clean other parts of the CX11N, see these sections: Cleaning the Pickup Roller (below) Cleaning the Print Head on page 15 Cleaning the Exposure Window and Document Table on page 15 Cleaning the ADF Pickup Rollers (CX11NF Only) on page 16
Cleaning the Pickup Roller
Warning: Be careful not to touch the fuser, which is marked CAUTION HIGH TEMPERATURE. If you have been using the CX11N recently, the fuser may be very hot.
1. Make sure the CX11N is turned off and that the power cord is not plugged into an outlet. 2. Open the MP tray cover and remove any loaded paper.
10. Flip down the orange lever, then close cover B.
11. Slide out and flip open the output tray extension, if necessary.
14 - Epson AcuLaser CX11N/CX11NF
3. Gently wipe the pickup roller inside the MP tray with a moistened cloth. 4. Grasp the blue cleaner slowly and move it out and in once.

Pickup roller

Caution: Do not turn the pickup roller; otherwise the CX11N may be damaged.
Note: Move the cleaner all the way out and in; otherwise, the CX11N may not be cleaned completely.

Cleaning the Print Head

If there are white vertical lines on your printout, you will need to clean the print head. 1. Pull off the cleaner cover from the right side of the CX11N.
5. Push in the blue lever inside the CX11N. 6. Close cover A and replace the cleaner cover.
Cleaning the Exposure Window and Document Table
2. Open cover A. 3. Pull forward on the blue lever inside of the CX11N. If you notice a decrease in print quality, clean the exposure window. You can use a soft dry cloth to clean the document table.

Exposure window

Document table
Epson AcuLaser CX11N/CX11NF - 15
Cleaning the ADF Pickup Rollers (CX11NF Only)
If the Auto Document Feeder fails to feed paper, open the ADF cover on the left side. Then close the cover and and wipe the rollers with a soft dry cloth to remove paper dust. 6. Attach the protective materials onto the product, then repack the product in its original box.

Caution: After transporting the product, set the transportation lock on the left side of the document table in the unlocked position before using the product.

For Short Distances

Pickup rollers
If you are moving the product on its own, two people should lift and carry the product. 1. Turn off the CX11N and remove the following items. Any loaded paper Paper cassette unit (if installed) Photoconductor USB cable Power cord 2. Be sure to lift the product by the correct positions as shown below.

Transporting the CX11N

For Long Distances
If you need to transport your product for long distances, carefully repack it using the original box and packing materials. 1. Make sure the CX11N is turned on, then press the Setup button. The Setup light turns on and the LCD screen displays Setup Mode for a few seconds, then changes to the Setup menu screen. 2. Use the u or d button to select Scan Settings, the press the r button. 3. Use the u or d button to select Carriage Lock, then press the r button. 4. Set the transportation lock on the left side of the document table to the locked position. 5. Turn off the CX11N and remove the following items: Any loaded paper Paper cassette unit (if installed) Photoconductor USB cable Power cord CPD-20021R1 CPD-19582R1 CPD-19583R1
Warning: The back side of the product is heavier than the front, so prepare for this difference as you lift. Two people should lift the product from the correct positions.
3. When moving the product, always keep it horizontal.

Related Documentation

CPD-19581R1 Epson AcuLaser CX11N/CX11NF Setup Guide Epson AcuLaser CX11N/CX11NF Basics Guide Epson AcuLaser CX11NF Fax Guide Epson AcuLaser CX11N/CX11NF CD-ROM with electronic Users Guide and Network Guide
16 - Epson AcuLaser CX11N/CX11NF