Basic Operation Guide

Safety Instructions
Important Safety Instructions.3

Solving Problems

Error Messages.. 20 Problems and Solutions. 20

Control Panel Functions

Control Panel..4
Summary of Panel Settings
Copy Mode.. 24 Memory Card Mode.. 25 Photo Print Mode. 26 Setup Mode.. 27

Handling Paper

Selecting Paper.6 Loading Paper..6

Copying

Placing Originals on the Document Table..8 Copying Photos.8 Copying Documents..9
Printing from a Memory Card
Handling a Memory Card.10 Printing Photos.11 Selecting and Printing Photos Using an Index Sheet.12
Printing from a Digital Camera
Using the PictBridge or USB DIRECT-PRINT..14

Replacing Ink Cartridges

Precautions.15 Removing and Installing Ink Cartridges..15

Maintenance

Checking the Ink Cartridge Status..18 Checking and Cleaning the Print Head..18 Aligning the Print Head..19

English

-for use without a computer-
Where to Find Information
Paper manuals Start Here Be sure to read this sheet first. This sheet tells you how to set up the printer and install the software. Basic Operation Guide -for use without a computerThis book provides information on using the printer without connecting to your computer, such as instructions on copying, or printing from a memory card. If you have problems using the printer, see the Solving Problems chapter in this book.

(this book)

Online manuals User's Guide This guide provides instructions for printing and scanning from your computer and information on the software. This guide is included in the software CD-ROM and installed automatically when you install the software. To read this guide, double-click the icon on your desktop. Online help Online help is built into each application included on the software CD-ROM. It provides detailed information on the application.
Warnings, Cautions, and Notes
Follow these guidelines as you read your instructions:
w Warning: Warnings must be followed carefully to avoid bodily injury. c Caution: Cautions must be observed to avoid damage to your equipment. Note: Notes contain important information about the printer. Tip: Tips contain hints for using the printer.

Copyright Notice

No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without the prior written permission of Seiko Epson Corporation. The information contained herein is designed only for use with this product. Epson is not responsible for any use of this information as applied to other printers. Neither Seiko Epson Corporation nor its affiliates shall be liable to the purchaser of this product or third parties for damages, losses, costs, or expenses incurred by the purchaser or third parties as a result of accident, misuse, or abuse of this product or unauthorized modifications, repairs, or alterations to this product, or (excluding the U.S.) failure to strictly comply with Seiko Epson Corporation's operating and maintenance instructions. Seiko Epson Corporation shall not be liable for any damages or problems arising from the use of any options or any consumable products other than those designated as Original Epson Products or Epson Approved Products by Seiko Epson Corporation. Seiko Epson Corporation shall not be held liable for any damage resulting from electromagnetic interference that occurs from the use of any interface cables other than those designated as Epson Approved Products by Seiko Epson Corporation. EPSON is a registered trademark and EPSON STYLUS and Exceed Your Vision are trademarks of Seiko Epson Corporation. USB DIRECT-PRINT and the USB DIRECT-PRINT logo are trademarks of Seiko Epson Corporation. Copyright 2002 Seiko Epson Corporation. All rights reserved. DPOF is a trademark of CANON INC., Eastman Kodak Company, Fuji Photo Film Co., Ltd. and Matsushita Electric Industrial Co., Ltd. SDHC is a trademark. Memory Stick, Memory Stick Duo, Memory Stick PRO, Memory Stick PRO Duo, MagicGate Memory Stick, MagicGate Memory Stick Duo, and Memory Stick Micro are trademarks of Sony Corporation. xD-Picture Card is a trademark of Fuji Photo Film Co., Ltd. General Notice: Other product names used herein are for identification purposes only and may be trademarks of their respective owners. Epson disclaims any and all rights in those marks.
Important Safety Instructions
Before using this printer, read and follow these safety instructions: Use only the power cord that comes with the printer. Use of another cord may cause fire or shock. Do not use the cord with any another equipment. Make sure the power cord meets all relevant local safety standards. Use only the type of power source indicated on the label. Place the printer near a wall outlet where the power cord can be easily unplugged. Do not let the power cord become damaged or frayed. Make sure the total ampere rating of the devices plugged into an extension cord or a wall outlet does not exceed the ampere rating limit. Avoid locations that are subject to rapid changes in heat or humidity, shocks or vibrations, dust, or direct sunlight. Do not block or cover openings in the case or insert objects through the slots. Place the printer on a flat, stable surface that extends beyond its base in all directions. It will not operate properly if it is tilted or at an angle. And make sure the back of the printer is at least 10 cm away from the wall for sufficient ventilation. Do not open the scanner unit while copying, printing, or scanning. Do not touch the white flat cable inside the printer. Do not spill liquid on the printer. Do not use aerosol products that contain flammable gases inside or around the printer. Doing so may cause fire. Except as specifically explained in your documentation, do not attempt to service the printer yourself.

Unplug the printer and refer servicing to
qualified service personnel under the following conditions: if the power cord or plug is damaged; if liquid has entered the printer; if the printer has been dropped or the case damaged; if the printer does not operate normally or exhibits a distinct change in performance. When storing or transporting the printer, do not tilt it, stand it on its side, or turn it upside down; otherwise ink may leak from the cartridge. Be careful not to trap your fingers when closing the scanner unit. Do not press too hard on the document table when placing the originals.
Ink cartridge safety instructions
Keep ink cartridges out of the reach of
children and do not drink the ink. If ink gets on your skin, wash it off with soap and water. If it gets in your eyes, flush them immediately with water. If you still have discomfort or vision problems, see a doctor immediately. If you remove an ink cartridge for later use, protect the ink supply area from dirt and dust and store it in the same environment as the printer. Do not touch the ink supply port or surrounding area.

Control Panel

Buttons
Buttons a Mode * Function Switches the modes between r Copy, C Memory Card, and J Photo. Sets the number of copies, or changes the cropping area. Displays detailed settings for each mode. Selects photos and menu items. Activates the settings you have selected. Cancels the current operation and returns to the previous menu. Runs maintenance programs or adjusts miscellaneous settings. Changes the view of photos on the LCD screen, or crops the photos. Starts copying and printing. Turns the printer on and off. (Light is on when the printer is on, and flashes when the printer is active, turning on, or turning off.) Stops copying and printing, or resets the settings you have made.

Copies (+ and -)

x Menu * udlr 4-way Scroll OK

y Back

f F [Setup] *
G [Display/Crop] x Start P On
Control panel design varies depending by location.
y Stop/Clear [y Stop/Clear Settings]
* For details on the items in each mode, see Summary of Panel Settings on page 24.

LCD screen

The LCD screen may contain a few small bright or dark spots, and because of its features it may have an uneven brightness. These are normal and do not indicate that it is damaged in any way.
Press r to open the setting item list. Press u or d to select the setting item and then press OK. Press l or r to change the displayed photo on the LCD screen.

Using the LCD screen

Follow the instructions below to select and change the setting menus and the photos on the LCD screen.

Adjusting the angle of the LCD screen
You can change the angle of the LCD screen.
Adjusting the brightness of the LCD screen
You can adjust the brightness of the LCD screen. 1. Press F [Setup] to enter the setup mode. 2. Press l or r to select Maintenance, then press OK. 3. Press u or d to select LCD Brightness, then press OK. You see the following screen.

b,d,e c d

4. Press u or d to adjust the brightness of the screen, then press OK.

Power saving function

After 13 minutes of inactivity, the screen turns black to save energy. Press any button (except P On) to return the screen to its previous state.
Use Copies + or - to set the number of copies for the selected photo. Press l or r to select the setting item. Press u or d to select the menu item. The highlighted part moves up or down.

Selecting Paper

Before printing, you need to select the correct paper type setting. This important setting determines how the ink is applied to the paper. Note:
The availability of special media varies by location. You can find the part number for the following Epson special papers on the Epson support Web site.

Loading Paper

1. Open and extend the paper support.
Choose from these paper types and settings:
Paper Type Paper Type Setting Plain Paper Loading capacity 12 mm 80 sheets 80 sheets Matte 20 sheets 80 sheets
2. Open the output tray and slide out the extensions.
Plain paper * Epson Bright White Paper Epson Premium Ink Jet Plain Paper Epson Matte Paper Heavyweight Epson Photo Quality Ink Jet Paper Epson Premium Glossy Photo Paper Epson Premium Semigloss Photo Paper Epson Ultra Glossy Photo Paper Epson Glossy Photo Paper
3. Flip the feeder guard forward.

Prem. Glossy 20 sheets

Ultra Glossy Photo Paper

20 sheets 20 sheets

* You can use paper with a weight of 64 to 90 g/m2.

4. Slide the edge guide.

8. Flip the feeder guard back.
5. Load the paper short edge first, even for landscape printing, with the printable side up.
The printable side is often whiter or brighter than the other side.

cm (in.) and cm (in.)

Follow the same steps to load A4 paper.
6. Place behind the tabs.
7. Slide the edge guide to the right. Make sure it fits under the arrow inside the left edge guide

Note: 2. Press OK. Note:

If your photos have faded over time, select ON to bring them back to life.
The copied image may not be exactly the same size as the original. Depending on the type of paper used, print quality may decline in the top and bottom areas of the printout, or these areas may be smeared.
Placing Originals on the Document Table
1. Open the document cover and place your original face-down on the document table.
If you set Color Restoration to On for a normal color photo, the photo may not be printed correctly.
3. Press OK. Your photo is previewed. 4. Select the number of copies. 5. Press x Menu and change the settings (& Print settings for Photo Print mode on page 26). Then press OK. 6. Press x Start. Note: 2. Close the cover gently.
If the edges of the copy are cropped off, move the original away from the corner slightly.

Copying Photos

Copying multiple photos
Place each photo horizontally.
You can copy photos from mm to mm. You can also copy two photos at the same time. 1. Press J Photo.

5mm 5mm

You can copy two cm (in.) size photos at the same time. If the edge of the photo is missing after you print, try copying them one at a time.
Cropping and enlarging a photo
6. Select the number of copies. 7. Press x Menu and change the settings (& Print settings for Photo Print mode on page 26). Then press OK to apply the new settings. 8. Press x Start.

Copying Documents

You can crop out the rest of the photo and print just the main subject by itself when you copy a photo. 1. Press J Photo and follow the instructions on the preceding pages to preview the photo. 1. Press r Copy.
2. Select a copy settings.
2. Press G [Display/Crop]. You see the cropping screen.
Select Color for color copies or B&W for black-and-white copies. Select a layout option. Set the number of copies.
3. Use the following button to set the area you want to crop.
Copies +, u, d, l, r Change the frame size. Move the frame.
3. Press x Menu to change the settings (& Print settings for Copy mode on page 24). Then press OK. 4. Press x Start. Note:

4. Press OK to confirm the cropped image. Note:
To readjust the frames position, press y Back to return to the previous screen.
Place your photo 5 mm away from the edge of the document table. Also when you place two photos, position each photo at least 5 mm away from the adjacent photo. You can copy several different sized photos at the same time, as long as they are larger than mm and all fit inside the mm area.
5. When you have finished checking the cropped image, press OK. Note:
The image. icon is displayed on the cropped

Handling a Memory Card

Inserting a memory card
If a digital camera is connected to the printer, disconnect it before you insert your memory card.
1. Make sure no memory cards are in the slots. Then insert your memory card. c Caution:
Do not insert more than one memory card at a time. Do not try to force the memory card into the slot. Memory cards will not go all the way in. Make sure you check which direction the card should be inserted, and if the card needs an adapter, make sure you attach the adapter before inserting the card. Otherwise, you may not be able to remove the card from the printer.
xD-Picture Card xD-Picture Card Type M xD-Picture Card Type H
SD Memory Card SDHC Memory Card MultiMediaCard

Compact Flash Microdrive

miniSD card* miniSDHC card*
microSD card* microSDHC card* (* Adapter required)

Removing the memory card

1. Make sure the memory card light is not flashing. 2. Remove the memory card by pulling it straight out.

Printing Photos

1. Press C Memory Card.
Memory Stick Memory Stick PRO MagicGate Memory Stick
2. Select one of the settings in the following table for viewing/printing your photos, and then press OK. Follow the instructions below to select the photos and set the number of copies.
Setting View and Print Photos Print All Photos Print by Date
Instructions Select a photo and set the number of copies. Press OK. Set the number of copies. You can view all of the photos by using l or r. Select the date, and then place a check mark and press OK. Press OK again, and select a photo. Set the number of copies. See Selecting and Printing Photos Using an Index Sheet on page 12. Your printer displays the photos on the memory card in sequence. When you see the photo that you want to print, press OK and set the number of copies. If you want to print additional photos, select the photo you want to print. Then set the number of copies.

Be sure to always install an ink cartridge into the printer immediately following the removal of the current ink cartridge. If the ink cartridge is not installed promptly, the print head may dry out, rendering it unable to print.
If it is difficult to remove the cartridge, lift the cartridge with more force until comes out.
7. Place the new ink cartridge in the cartridge holder and press it down until it clicks into place.
5. Before you open the new ink cartridge package, shake it four or five times. Then remove it from the package.
8. Close the ink cartridge cover and press it until it clicks into place. c Caution: c Caution:
Be careful not to break the hooks on the side of the ink cartridge when you remove it from the package. Do not touch the green chip on the side of the cartridge. This can damage the ink cartridge. If you find it difficult to close the cover, make sure all the cartridges are firmly seated. Press down on each cartridge until you hear it click into place. Do not attempt to force the cover closed.
6. Remove the yellow tape.
9. Close the scanner unit.
10. Press OK. The ink delivery system starts charging. c Caution:
Do not turn off the printer during ink charging as this will waste ink.
If a message on the LCD screen still tells you that a cartridge should be replaced, the ink cartridges may not be installed properly. Press OK again, and press down the ink cartridge until it clicks into place.
Checking the Ink Cartridge Status
You can check which cartridge is low. 1. Press F [Setup]. 2. Select Ink Levels, then press OK. You see a graphic showing the ink cartridge status:
C (Cyan), M (Magenta), Y (Yellow), B (Black)
2. Press F [Setup]. (If you have just finished cleaning the print head, you can start the nozzle check by pressing x Start.) 3. Select Maintenance, then press OK. 4. Select Nozzle Check, then press OK. 5. Press x Start. 6. Examine the nozzle check pattern you printed.
If your printout looks like the one shown below, the print head does not need to be cleaned yet. Press OK to return to the main menu.
When your ink starts getting low, is displayed. 3. Press y Back to return to the previous screen. Note:
Epson cannot guarantee the quality or reliability of non-genuine ink. If non-genuine ink cartridges are installed, the ink cartridge status may not be displayed.

If your printout has gaps like the one shown below, clean the print head as described in the next section.

Cleaning the print head

Follow these steps to clean the print head so it can deliver ink properly. Before cleaning the print head, run a nozzle check to see if the print head needs cleaning (& Checking the print head on page 18). Note:
Print head cleaning uses ink, so clean it only if quality declines. When ink is low, you may not be able to clean the print head. When ink is expended, you cannot clean the print head. Replace the appropriate ink cartridge first (& Removing and Installing Ink Cartridges on page 15).
Checking and Cleaning the Print Head
If your printouts are unexpectedly light, colors are missing, or you see light or dark lines across the page, you may need to clean the print head. Tip:
To maintain print quality, we recommend printing a few pages on a regular basis.

Checking the print head

You can print a nozzle check pattern to see if any print head nozzles are clogged, or to check the results after cleaning the print head. 1. Load A4-size plain paper (& page 6).
1. Press F [Setup]. 2. Select Maintenance, then press OK. 3. Select Head Cleaning, then press OK.
Never turn off the printer while head cleaning is in progress. You may damage it.
5. When cleaning finishes, a message is displayed on the LCD screen. Press x Start to print a nozzle check pattern to check the results (& Checking the print head on page 18). If there are still gaps or the test patterns are faint, run another cleaning cycle and check the nozzles again. Note:
If you do not see any improvement after cleaning about four times, turn off the printer and wait for at least six hours. This lets any dried ink soften. Then try cleaning the print head again. If quality still does not improve, one of the ink cartridges may be old or damaged and needs to be replaced (& Removing and Installing Ink Cartridges on page 15).

Aligning the Print Head

If your printouts contain misaligned vertical lines or horizontal banding, you may be able to solve this problem by aligning the print head. 1. Load A4-size plain paper (& page 6). 2. Press F [Setup]. 3. Select Maintenance, then press OK. 4. Select Head Alignment, then press OK. 5. Press x Start. Four rows of alignment patterns are printed. 6. Look at pattern #1 and find the patch that is most evenly printed, with no noticeable streaks or lines. 7. Select the number for that patch, then press OK.
4. Press x Start. The printer begins cleaning the print head. Follow the message on the LCD screen.
8. Enter the numbers for the other patterns in the same way. 9. When you finish, press OK and you see a message indicating alignment is complete.
See your online Users Guide for help on using the printer with a computer.

Problems and Solutions

Setup problems
LCD screen came on and then went out. The printers voltage may not match the outlet rating. Turn off the printer and unplug it immediately. Then, check the printer labels. c Caution
If the voltage does not match, DO NOT PLUG YOUR PRINTER BACK IN. Contact your dealer.

Error Messages

Error Messages A printer error has occurred. Turn off the printer, then press On button to turn on. See your documentation. A scanner error has occurred. See your documentation. Waste ink pad in the printer is saturated. Contact your dealer to replace it. Cannot recognize ink cartridges. Make sure the ink cartridges are installed correctly. Solution Turn the printer off and then back on. Make sure that no paper is still in the printer. If the error message still appears, contact your dealer. Turn the printer off and then back on. If the error message still appears, contact your dealer. Contact your dealer to replace it.
The printer makes noise after you turn it on. Make sure the protective tape is not blocking the print head. After releasing the print head turn off the power, wait a moment, then turn it back on. The printer makes noise after ink cartridge installation. When you install ink cartridges, the ink delivery system must be charged. Wait until charging is finished (the charging message disappears from the LCD screen), then turn off the printer. If you turn it off too soon, it may use extra ink the next time you turn it on. Make sure the ink cartridges are seated securely and no packing material remains in the printer. Open the cartridge cover and push the cartridges down until they click into place. Turn off the power, wait a moment, then turn it back on. A screen that prompts you to restart the computer did not appear after finishing the software installation.
Make sure the ink cartridges are installed correctly. (& Removing and Installing Ink Cartridges on page 15). Then try again. Make sure the memory card has been inserted correctly. If so, check to see if there is a problem with the card and try again.
Cannot recognize the memory card or disk.
The software has not been installed correctly. Eject and insert the software CD-ROM, and then install the software again. The terms on the LCD screen are not displayed in your language.

If the language displayed on the LCD screen is not the one you want, select the language you want from the Setup menu.

Paper feed problems

Paper does not feed correctly or is jammed. If paper does not feed, remove it from the sheet feeder. Fan the paper, load it against the right side, and slide the left edge guide against the paper (but not too tightly). Make sure the paper is not in front of the feeder guard. Do not load paper above the c arrow mark inside the left edge guide (& Loading Paper on page 6). If the paper is stuck inside the printer, press the P On button to turn it off. Open the scanner unit and remove any paper inside, including any torn pieces. Close the scanner unit. If the paper remains near the sheet feeder, gently pull it out. Then turn the printer back on and carefully reload paper.
LCD screen is off. Make sure that the printer is on. Turn off the printer and make sure that the power cord is securely plugged in. Make sure that your outlet works and is not controlled by a wall switch or timer. The printer makes printing sounds, but nothing prints. The print head nozzles may need cleaning (& Cleaning the print head on page 18). Make sure the printer is on a flat, stable surface. The margins are incorrect.
Make sure your original is positioned in the right bottom corner of the document table. If the edges of the copy are cropped off, move the original away from the corner slightly. Make sure the paper size settings are correct for the paper you have loaded. Make sure your paper is loaded short edge first, all the way to the right, with the left edge guide lightly against the paper (& page 6). Do not load paper above the c arrow mark inside the left edge guide (& page 6). Select Actual instead of Auto Fit Page or adjust the zoom settings. Change the Expansion setting to adjust the amount of image that extends beyond the paper size during borderless printing. Blank pages are printed. The print head nozzles may need cleaning (& Cleaning the print head on page 18).
If paper jams frequently, make sure the left edge guide is not pushed too tightly against the paper. Try loading fewer sheets of paper. Make sure you are not using paper with binder holes.

Print quality problems

You see banding (light lines) in your printouts or copies.
Clean the print head (& Checking the print head on page 18). Make sure you select the correct paper type (& Selecting Paper on page 6). Make sure the printable (whiter or glossier) side of the paper is face up. Use up ink cartridges within six months after installing them. The ink cartridges may need replacing (& Removing and Installing Ink Cartridges on page 15).
Printing and copying problems
Align the print head (& Aligning the Print Head on page 19). Clean the document table. See your online User's Guide. If a moir (cross-hatch) pattern appears on your copy, change the zoom setting or shift the position of your original. Your printout is blurry or smeared.

Make sure the document is placed flat against the document table. If only part of the image is blurred, your original may be wrinkled or warped. Make sure the printer is not tilted or placed on an uneven surface. Make sure your paper is not damp, curled, or loaded face down (the whiter or glossier printable side should be face up). Load new paper face-up.
Make sure you select the correct paper type (& Selecting Paper on page 6). Make sure your paper is not damaged, old, dirty, or loaded face-down. If it is, load new paper with the whiter or glossier side face-up. When you select Standard or Best as the quality setting, select Off as the bidirectional setting. Bidirectional printing decreases print quality. Your printout is grainy.
Make sure you select the correct paper type (& Selecting Paper on page 6). Use a support sheet with special paper or try loading your paper one sheet at a time. Load your paper one sheet at a time. Remove sheets from the output tray so not too many collect at a time. Clean the print head (& Cleaning the print head on page 18). Align the print head (& Aligning the Print Head on page 19).
Make sure you select Best as the quality setting. If you are printing or copying a photo, make sure you are not enlarging it too much. Try printing it smaller. Align the print head (& Cleaning the print head on page 18). You see incorrect or missing colors. Clean the print head (& Cleaning the print head on page 18). The ink cartridges may be old or low on ink. Replace an ink cartridge (& Removing and Installing Ink Cartridges on page 15). Make sure you loaded the right paper and selected the correct setting for it on the LCD screen. If your paper runs out, replace it as soon as possible. If the printer is left without paper for a long period of time, the colors of your next copy or print job may be incorrect. Your printout is too dark. If you are copying, press x Menu and adjust the Density. The image size or position is incorrect. Make sure you loaded the right paper and selected the correct setting for it on the LCD screen. Make sure the original is placed correctly on the document table (& Placing Originals on the Document Table on page 8). Clean the document table. See your online User's Guide.
To clean the inside of the printer, make a copy without placing a document on the document table. Load and eject dry paper several times. See your online User's Guide.
Use only paper recommended by Epson and genuine Epson cartridges. Clean the document table. See your online User's Guide. Your printout is faint or has gaps. Clean the print head (& Cleaning the print head on page 18). If you notice jagged vertical lines, you may need to align the print head (& Aligning the Print Head on page 19). The ink cartridges may be old or low on ink. Replace an ink cartridge (& Removing and Installing Ink Cartridges on page 15).

Scan quality problems

Only part of the photo is scanned.
The printer has non-readable areas at the edges. Move the photo away from the edges slightly. The file size is too big. Try changing the quality settings.

For more solutions

If you cannot solve the problem using the troubleshooting, contact customer support services for assistance. You can find customer support information for your area in your online User's Guide or warranty card. If it is not listed there, contact the dealer where you purchased your printer.

Copy Mode

Menu Copies Color/B&W Layout
Setting Item 1 to 99 Color, B & W With Border Borderless
Description Copies your original with a standard 3-mm margin. Copies your photo all the way to the edges of the paper.
Your image is slightly enlarged and cropped to fill the sheet of paper. Print quality may decline in the top and bottom areas of the printout, or the area may be smeared when printing.
Print settings for Copy mode

Menu Zoom

Setting Item Actual, Auto Fit Page
Description Select Actual to print your photo at its original size. Select Auto Fit Page for borderless printing and resizing the image to fit various common paper sizes. You can also resize the original to a specific scale using Copies + or -. -

Paper Type

Plain Paper, Matte, Prem. Glossy, Ultra Glossy, Photo Paper 10 x 15 cm, 13 x 18 cm, A4

Paper Size

Menu Quality Density Expansion
Setting Item Draft, Standard, Best -4 to +4 Standard, Mid., Min.

Description -

Select the amount the image is expanded when you select Borderless. Standard: The image is slightly enlarged and cropped to fill the sheet of paper. Mid.: Margins might be printed. (Low expansion rate.) Min.: Margins might be printed. (Lowest expansion rate.)

Memory Card Mode

Setting Item View and Print Photos Print All Photos Print by Date Print Index Sheet Slide Show
Description Prints only the photos that you choose. Prints all the photos on your memory card. Prints photos by the date they ware taken. Prints thumbnails of the photos on your memory card and lets you select which ones you want to print. Displays all photos on your memory card as a slide show and prints photos that you choose.
Print settings for Memory Card mode

Menu Paper Type

Setting Item Prem. Glossy, Ultra Glossy, Photo Paper, Plain Paper, Matte

Menu Paper Size Layout

Setting Item 10 x 15 cm, 13 x 18 cm, 16:9 wide, A4 Borderless
Description Prints your photo all the way to the edges of the paper.

Your image is slightly enlarged and cropped to fill the sheet of paper. Print quality may decline in the top and bottom areas of the printout, or the area may be smeared when printing. With Border Quality Date Standard, Best None, yyyy.mm.dd, mmm.dd.yyyy, dd.mmm.yyyy On, Off Prints your photo with a white margin at the edge. Prints the date your photo was taken.

Bidirectional

Select On to increase the print speed. Select Off to improve the print quality (but your photos print more slowly). Select the amount the image is expanded when you select Borderless. Standard: The image is slightly enlarged and cropped to fill the sheet of paper. Mid.: Margins might be printed. (Low expansion rate.) Min.: Margins might be printed. (Lowest expansion rate.)

Expansion

Standard, Mid., Min.

Photo Print Mode

Color Restoration Setting
Setting Item Restoration Description Select On to restore faded photo.
Print settings for Photo Print mode
Setting Item Prem. Glossy, Ultra Glossy, Photo Paper, Matte 10 x 15 cm, 13 x 18 cm, A4 Borderless

Paper Size Layout

Copies your photo all the way to the edges of the paper.
Your image is slightly enlarged and cropped to fill the sheet of paper. Print quality may decline in the top and bottom areas of the printout, or the area may be smeared when printing. With Border Quality Expansion Standard Standard, Mid., Min. Copies your original with a standard 3-mm margin. Select the amount the image is expanded when you select Borderless. Standard: The image is slightly enlarged and cropped to fill the sheet of paper. Mid.: Margins might be printed. (Low expansion rate.) Min.: Margins might be printed. (Lowest expansion rate.)

Setup Mode

Ink Levels Maintenance
Check the ink cartridge status. Nozzle Check Head Cleaning LCD Brightness Head Alignment Change Ink Cartridge Language Display Format Print a nozzle check pattern to check the condition of the print head. Clean the print head to improve the condition of the print head. -10 to +10 Adjust the alignment of the print head. Change ink cartridges before they are expended. English, French, German, Italian, Spanish, Portuguese, Dutch, Russian 1up with Info, 1up without Info, 9up
PictBridge Setup Restore Default Settings
Set the print settings when printing with a PictBridge device. Reset the LCD panel settings to the factory default settings.

Supply Ink Cartridges Printer Name Stylus CX8300 Series Stylus DX8400 Series Black T0731 T0731H T0711 T0711H Cyan T0732 T0712 Magenta T0733 T0713 Yellow T0734 T0714
Available ink cartridge sizes vary by location.

Epson Australia - Epson Stylus CX8300 Consumables
http://www.epson.com.au/products/multifunctional/styluscx8300_con.
Home | Products | Videos | Support & Downloads | News | About Us | About Our New Home Page Multifunction Inkjet Printers Stylus CX5500 Stylus CX6900F Stylus CX7300 Stylus CX8300 Stylus Photo RX590 Stylus Photo RX610 Stylus Photo RX690 Inkjet Printers Laser Printers Multi Functional Laser Printers Dot Matrix Printers Scanners Projectors Large Format Printers Multimedia Storage Viewers Back Catalogue Products Warning to Epson printer owners. Many well known third party companies claim their inkjet printing papers are compatible with all Epson inkjet printers. Epson has reports from many customers who have used third party's paper and have been very disappointed with the results. When the same customers have changed to genuine Epson paper, they have been amazed and pleased with the colour and quality of their prints. Epson recommends that you do not use any non genuine printing papers if you want to get the best results from your Epson printer. Epson printers are very carefully tuned to ensure Epson inks and Epson's patented MicroPiezo printhead produce the best quality prints using carefully selected Epson paper. All other brands of printing papers are not wholly compatible with the printer. Link to for more information and independent studies on media durability by Wilhelm Research Equipment supplied by Epson Australia is designed to function in conjunction with genuine Epson consumables and accessories specifically configured for it.
GENUINE Epson PAPERS Bright White Ink Jet Paper A4 - 500 Sheets Double-Sided Matte Paper - A4 - 50 Sheets Glossy Photo Paper 4"x6" - 50 Sheets Glossy Photo Paper A4 - 20 Sheets Ink Jet Transparency Film A4 - 30 Sheets Matte Paper - Heavy Weight A4 - 50 Sheets Premium Glossy Photo Paper A4 - 20 Sheets Premium Glossy Photo Paper Photo Size (4 x 6") - 50 Sheets Premium Glossy Photo Paper Photo Size (5 x 7") - 20 Sheets Premium Semigloss - Photo Paper A4 - 20 Sheets Ultra Glossy Photo Paper - 4 x 6" - 50 Sheets Ultra Glossy Photo Paper - A4 - 15 Sheets INK CARTRIDGES Black Ink Cartridge Cyan Ink Cartridge Magenta Ink Cartridge Yellow Ink Cartridge PRODUCT CODE S041442 S041569 S042072 S042071 S041063 S041258 S041285 S041867 S041464 S041332 S041943 S041927 PRODUCT CODE T0731 T0732 T0733 T0734

Epson Stylus CX8300

4 Colour Multifunction Inkjet Printers
The everyday allinone printer with builtin LCD viewer for PCfree convenience
click for larger image Where to Buy Printable Brochure $199 RRP inc GST

Overview

Consumables

Downloads

Awards & Reviews Current Promotions
As an International ENERGY STAR Partner, Epson has determined that this product meets the International ENERGY STAR guidelines for energy efficiency. Epson is the registered trademark of Seiko Epson Corporation. Epson STYLUS, PerfectPicture, MicroPiezo, AcuPhoto Halftoning, QuickDry are the trademarks of Seiko Epson Corporation. All other names and company names used herein are for identification purpose only and may be the trademarks or registered trademarks of their respective owners. Epson disclaims any and all rights in those marks. All print samples shown herein are imulations. Specifications are subject to change without notice.
Channel Epson Dealer Site | Epson World Site | Unsubscribe | Privacy Policy | Terms of Use | Warranty | Careers @ Epson | Contact Us Copyright. 2007 Epson Australia Pty Limited. All rights reserved. ABN 625 783

1 von 1

10.10.2007 16:50